Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
The 'vfs_block' component will give access to a VFS file through a
Block session. For more detailed information please look at its
README.
(On a technical note, the server currently only allows for one
active session and has only one pending back end request but can
easily be extended in the future.)
Fixes#3781.
Setting the 'size' attribute will restrict a reader to consume
0s up to the specified amount per VFS handle. The attribute is
parsed as 'Number_of_bytes', which will limit the amount to the
maximum of the addressable memory on the platform.
This addition comes in handy when needing to provide a synthetic
empty file with a fixed size.
Issue #3781.
So far the condition whether to spawn a new job or not depended on
the amount of data already processed. This could lead to spawning
more jobs than necessary if batching is used and in return could
result in creating invalid requests in case the tested block session
is not large enough.
In addition to checking the amount of data the test now stores the
number of the last block and checks if the current request is in
range. This properly limits the total amount of requests.
Issue #3781.
The seek offset has to be updated on partial writes according to the
current write position. Otherwise writes will override the content
at the initial offset.
Fixes#3780.
The blit API archive missed the CPU-architecture-specific variants of
the blit library such that all depot binaries worked with the generic
(slow) fallback implementation. This patch adds the missing pieces to
the blit API archive.
To enable logging of ROM session deliveries, set the "diag" on
session routes:
<route>
<service name="ROM" label_prefix="/bin/">
<child name="cached_fs_rom" diag="yes"/>
</service>
…
<route>
Fix#3772
Make the framebuffer driver for pl11x chipsets,
the ps2 input driver for pl050, and the lan9116 NIC driver independent from
the pbxa9 board by using the newly introduced common ARM platform driver API.
Ref #3299
* Remove input driver specific to i.MX53 tablet board from QSB driver pkg
* Move GPIO settings for QSB LVDS backlight out of framebuffer driver into
GPIO driver config
* Move PWM driver functionality out of framebuffer driver
* Make framebuffer driver configureable, and less dependent on
platform driver i.MX53 specifics
- Since Genode::strncpy is not 100% compatible with the POSIX
strncpy function, better use a distinct name.
- Remove bogus return value from the function, easing the potential
enforcement of mandatory return-value checks later.
Fixes#3752
The former ldso-startup static library (now called ldso_so_support) is
used to spice each shared object/library with local support code for the
dynamic linker (execution of static constructors and ARM-EABI).
Therefore, the library must be statically linked to each dynamic
library.
As a result recipes for dynamic libraries must always depend on the "so"
API, which makes ldso_so_support.mk and so_support.c available
independent of "base". Additionally, ldso_so_support is also provided in
the libc API to cut the dependency early for libc/posix libraries.
Issue #3720
This patch removes old 'Allocator_guard' utility and replaces its use
with the modern 'Constrained_ram_allocator'.
The adjustment of core in this respect has the side effect of a more
accurate capability accounting in core's CPU, TRACE, and RM services.
In particular, the dataspace capabilities needed for core-internal
allocations via the 'Sliced_heap' are accounted to the client now.
The same goes for nitpicker and nic_dump as other former users of the
allocator guard. Hence, the patch also touches code at the client and
server sides related to these services.
The only remaining user of the 'Allocator_guard' is the Intel GPU
driver. As the adaptation of this component would be too invasive
without testing, this patch leaves this component unchanged by keeping a
copy of the 'allocator_guard.h' locally at the component.
Fixes#3750
The sandbox library supports the forwarding of session requests from the
outside to one of the hosted children according to a policy. This patch
introduces the distinction between two cases, which previously triggered
the denial of the session request.
- There exists no matching policy for the requested session
- There exists a matching policy but the referred server child
does not exist (yet)
Whereas the proper response to the first case is the denial of the
request, the second case can occur in situation where a dynamic init is
used to implement a staged startup, for example via the deploy
mechanism. In such cases, a policy may exist as a static rule while the
server has not been started yet. This patch changes the behavior such
that such requests are stalled.
The patch is accompanied with test cases for exercising both situations.
Fixes#3733
- don't use 'qemu -serial mon:stdio' anymore as it no longer works as
expected
- use "bash -l" with [terminal] to read user's profile configuration,
e.g., PATH settings
- added missing boot modules and cap quotas
As a result of the API change the memory handling could be simplified.
Since the Block session dataspace is now directly used for DMA, we
actually only have to provide the memory for setting up PRP lists for
large requests (for the moment more than 8 KiB of data).
As we limit the maximum data transfer length to 2 MiB, we get by with
just a page per request. Those memory is allocated beforehand for the
maximum number of I/O requests, which got bumbed to 512 entries. Since
not all NVMe controllers support such large a maximum data transfer
length and this many entries, especially older ones, the values are
capped according to the properties of the controller during
initialization. (The memory demands of the component are around 3 MiB
due to setting up for the common case, even if a particular controller
is only able to make use of less.)
(Although there are controllers whose maximum memory page size is more
than 4K, the driver is hardcoded to solely use 4K pages.)
In addition to those changes, the driver now supports the 'SYNC' and
'TRIM' operations of the Block session by using the NVMe 'FLUSH' and
'WRITE_ZEROS' commands.
Fixes#3702.
The update modification timestamp is implemented as one-shot where
the caller is expected to try again if the first attempt failed (see
current libc implementation). So the message is misleading as further
attempts might succeed.
Issue #3713.
This patch fixes a regression with run/log_core introduced by
2064ffd64b nova: support multidimensional affinity space
The run tool uses a log message 'run_boot_string' to detect successful
boot as well as to detect unexpected reboots. This message should never
be logged twice and, thus, should not be part of the core_log. The patch
mentioned above moved the former run_boot_string after the core_log
initialization.
The tar vfs plugin returns an inode value of zero and a type directory
for null records, which wrongly triggers the file-system loop detection
of the find utility. This patch returns the node pointer as inode value
instead, which is a unique value.
Fixes#3695
This patch changes the 'Single_file_system' to return NO_PERM only if
the to-be-unlinked file corresponds to the single file. This way, a
<rom> co-mounted with a <ram> file-system does not stand in the way of
unlinking files from the <ram>. The concrete symptom occurred the
following scenario:
<vfs>
<dir name="home">
<ram/>
<rom name="..."/>
</dir>
</vfs>
The following sequence of commands wrongly resulted in "Operation not
permitted":
$ mkdir -p /home/a/b/c
$ rm -f /home/a/b/c/d
In this case, rm should not fail (unlink should return ENOENT)
Fixes#3690
When updating the domain object of interfaces that stay with the same domain
during a reconfiguration, until now, the normal "detach raw" function was used.
This caused the old domain object to discard a dynamic IP config as all
interfaces detached. This caused interfaces also to discard network links
established with the old configuration although it wasn't necessary. Thus, now
we use a dedicated "detach" in case that an interface actually stays with its
domain. This new "detach" doesn't decrease the interface counter of the domain,
so, it'll not discard its dynamic IP config. If, however, during a
reconfiguration, there's no interface calling this function (all interfaces
move to another or no domain), the dynamic IP config is still discarded as
expected.
Fixes#3686
Until now, the DHCP client was called also for DHCP requests when an interface
had a domain but yet no IP config. Now, an interface distinguishes between DHCP
requests and replies first and then accordingly calls the DHCP server or the
DHCP client if they're available. This also prevents that the DHCP client has
to handle packet headers other than that of DHCP.
Fixes#3681
Let the DHCP client be a constructible member of Interface that is constructed
only as long as the interface is attached to a domain with a dynamic IP config.
This prevents DHCP client timeouts from a period with dynamic IP config to
trigger after a reconfiguration to a static IP config. Furthermore, handle
DHCP-reply packets at an interface only when the DHCP client its constructed.
Otherwise drop such packets.
Ref #3681
This commit fixes the following issues regarding cache maintainance
under ARM:
* read out I-, and D-cache line size at runtime and use the correct one
* remove 'update_data_region' call from unprivileged syscalls
* rename 'update_instr_region' syscall to 'cache_coherent_region' to
reflect what it doing, namely make I-, and D-cache coherent
* restrict 'cache_coherent_region' syscall to one page at a time
* lookup the region given in a 'cache_coherent_region' syscall in the
page-table of the PD to prevent machine exceptions in the kernel
* only clean D-cache lines, do not invalidate them when pages where
added on Cortex-A8 and ARMv6 (MMU sees phys. memory here)
* remove unused code relicts of cache maintainance
In addition it introduces per architecture memory clearance functions
used by core, when preparing new dataspaces. Thereby, it optimizes:
* on ARMv7 using per-word assignments
* on ARMv8 using cacheline zeroing
* on x86_64 using 'rept stosq' assembler instruction
Fix#3685
This depot package is the runtime for rtc_drv and system_rtc server with
coordinated update of system and hardware RTC via reports. It replaces
drivers_rtc which was never freestanding drivers package and, therefore,
has to be accompanied with a running platform_drv etc.
Fixes#3680
- use two disks with two partitions each
- one disk uses MBR and one GPT
- connect one 'part_block' to each disk
- run 'block_tester' and 'test-block-client' connecting to one partiion
on each disk
- x86 uses 'ahci_drv' as disk back-end, Linux 'lx_block'
- on autopilot enable for Qemu only
issue #3671
net:
* increase queue size to 1024 (more stable on Linux)
* use mac address from Nic session instead of random one
* handle data that is larger than rx descriptor correctly (copy less)
* clear descriptor header (12 bytes) on rx
generic:
* always use 'avail_idx' (tx and rx)
* added barriers when reading/writing queues (TMP)
Ref #3620
We do not use the VMM with several CPUs until now.
On the other hand there is a dead-lock due to the
generic timer calling the cpu handler function explicitly,
which already holds the lock. For the time-being remove the lock.
Ref #3620
- use Job API as block connection back end
- use Request_stream API as front end
- use Mmio framework for gpt and mbr parsing
- implement sync correctly
fixes#3652
When specifying "/" or "" as rel_path to the 'Directory' constructor,
the constructed directory should refer to the same directory. The
implementation of the join utility did not consider this corner case. It
occurred during the attempt to use fs_query with "/" given as path.
This patch also adds a Directory::Entry::dir accessor that returns true
if the entry is a directory.
Fixes#3630
- Remove dated 'Block::Driver' front end and implement
'Block::Request_stream' front end
- Remove all dynamic memory allocations but DMA memory allocations
- Remove 'Platform_hba' and implement platform specific functions in
'spec/<platform>/*'
- Ata and Atapi don't inherit from 'Port' any more, but are a member of
'Port' as a protocol implementation
- Use platform driver for MMIO mappings (x86)
- Exchange stateful initialization of Ata/Atapi with a sequential
initialization using 'wait_for_any' and 'retry' patterns
- Fix Atapi initialization by setting the byte count limit
- Set FIS receive base only when Cmd::FRE is disabled and Cmd::FR is 0
- Put everything in namespaces ('Ahci', 'Ata', or 'Atapi')
- Ata decides during read/write operations to use native-command queuing
or normal DMA requests
- Remove port claiming logic (is now done via 'Constructibles')
fixes#3636
The ARP destination MAC was set to the Ethernet source MAC which is not
necessarily the MAC of the other ARP peer. Instead use the ARP source MAC of
the ARP request.
Especially the initial reset ended up with an unusable keyboard in rare
cases before. This commit disables keyboard and mouse handling of i8042
during command sequences according to a note from
https://www.win.tue.nl/~aeb/linux/kbd/scancodes-12.html
An invalid ROM dataspace can occur, for example, when requesting a ROM
from the report_rom service before the first report was posted. Such a
<rom> node can still be useful if it's dynamic. E.g., it can be watched.
Hence, the corner case of an invalid ROM dataspace should be gracefully
handled instead of causing an abort.
Issue #3606
This patch adds a special variant of a 'Content_producer' called
'Xml_producer', which allows the direct use of an 'Xml_generator'
for generating the ROM-module content.
This patch extracts the child-management functionality from the init
component into a new library called "sandbox". The library API is
located at 'os/include/os/sandbox.h'.
The sandbox API allows for the interaction of the component with the
sandboxed children by providing locally implemented services. This
mechanism is illustrated by the new test at os/src/test/sandbox.
Issue #3601
This patch extends the 'Buffered_xml' utility with a new constructor
that fills the buffer with the output of an 'Xml_generator'. It thereby
presents an easy way to generate XML to be consumed locally.
The patch also add a deprecation mark to the original 'xml' accessor
because copying 'Xml_node' objects (here as return value) is dangerous.
The new 'with_xml_node' method should instead be used to access the XML
content stored in the buffer.
Fixes#3602
`volatile` effectively prevents instruction reordering by the compiler
and fixes an issue with -O3 compiled components.
Note, this commit does not address further arguments regarding memory
barriers and volatile voiced in issue #693.
Issue #693
