During interrupt handling the driver masked and cleared interrupts as
recommended in the spec to prevent spurious or unnecessary interrupts
from occurring.
Due to the way the current implementation operates new Block requests
got submitted while handling completions for already finished ones.
Since interrupts where masked at this point the controller did not
generate interrupts when the newly submitted requests got completed.
As the mask/clear optimization is apparently not strictly needed and
according to the spec undefined when using MSI-X it is removed.
Fixes#4684
This commit enables users of the VMM to define CPU type and count, RAM size,
kernel and initrd ROM names, GIC version, and Virtio devices to be used.
Derived from the configuration values a flattened device-tree blob (DTB) is
generated and transfered to the VM.
Fixgenodelabs/genode#4670
Consume '<iommu/>' tag from 'devices' report. In case an IOMMU is
present map physical memory to arbitrary locations within IO page table
range 1K-4G. This way every device PD has access to ~4GB of DMA space.
issue #4665
'_env_ram' allocations can lead to
'Expanding_pd_session_client::try_alloc' quota upgrades, which in turn
may lead to a resource request by the platform driver. Therefore, we
check the available quota within the platform driver before allocations.
This is not an optimal solution.
issue #4667
related issue #3767
To prevent caching side-effects of USB DMA memory taken from the packet stream
all allocations of USB packets need to be on separated cachelines at least.
Fixgenodelabs/genode#4655
This patch equips the pin-driver framework with support for the
time-multiplexed operation of a pin as output or input. This is needed
when implementing I2C communication via a bit-banging driver.
To operate pin in both directions, a driver obtains both a pin-state and
a pin-control session for the same pin. The pin-state session can be
used to sense the current pin state. The control session allows the
client to set the pin to high or low (using the 'state' method), or to
set it to high-impedance via the 'yield' method. Once switched to
high-impedance, the pin can be used as input.
Issue genodelabs/genode-allwinner#10
If a device should not be reset, powered off, and its clocks
shall stay untouched when it gets released, the leave_operational
attribute can be set to true in the device node of the related
device inside the devices ROM delivered to the platform driver.
This is useful for drivers, which only enable and initialize
their device, and can be closed afterwards.
Ref genodelabs/genode#4654
Reintroduce:
USB Attached SCSI devices might expose a bulk-only interface
as fall-back at interface 0 and alternate setting 0. This commit
allows for probing all alternate settings of the active interface
to be able to use such devices.
The configuration was extended so that in case the device interface
is known beforehand the driver can be configured accordingly.
Additionally:
Perform configuration reset upon sessions close in order to bring USB
device to a well defined state.
fixes#4494
Implement the guest code in dedicated assembler source file, assemble
and link the binary to vmm_x86. The resulting guest-code binary
populates one page that is mapped to host the reset vector of the guest.
This approach simplifies future guest code adaption resp. extension,
e.g., to test rdmsr/wrmsr exiting.
Fixes#4638
This reverts commit 9a37ccfe29 except for the
new declarations in public headers (in order to not change any APIs again).
We revert the commit as we found that there are corner cases in which it
produces a bad UDP checksum. The bad UDP checksum was observed via Wireshark at
a TFTP server in a Sculpt 22.10 Debian 11 VM on the first request of fetching a
file with the TFTP client of the uboot on our iMX8 test board.
Ref #4636
According to OpenBSD's azalia driver some AMD HDAudio devices do not
play nice with MSIs although the capability is set. At least the
0x1457 device was tested and worked using GSIs only.
genodelabs/genode#4578
Some DHCP clients (Debian VM in Sculpt) persistently store the last lease they
obtained and try to directly DHCP REQUEST it on a new startup whithout doing
DHCP DISCOVER beforehand. In case the NIC router doesn't know about the lease
anymore (timeout, new router instance), the router used to just ignore the DHCP
REQUEST. This led to significant delays in the network startup of the client
(delayed retries until give-up and DHCP DISCOVER). With this commit, the router
answers such packets with a DHCP NAK instead, causing the client to directly
switch to DHCP DISCOVER.
Fixes#4634
On-demand initialization prevents read-write operations on BARs of
invalid devices at construction time, which may result in surprising
behavior later on, for example, when resetting X260 notebooks via ACPI
information.
These utilities simplify the control of clocks, resets, and power
domains from within the platform driver.
This is needed when driving a low-level device directly from the
platform driver, for example for driving the mbox mechanism to access
the system-control processor of the PinePhone.
Implemented as depicted in the OpenBSD driver, register description
found in 'AMD SB700/710/750 Register Reference Guide'
(43009_sb7xx_rrg_pub_1.00.pdf).
Issue #4629.
Instead of using a global value to enumerate the MSIs, use a function argument
instead. Whenever the process of PCI device reporting gets started again,
due to an initially too small report buffer, the MSI enumeration value is reset
again. Formerly, we wasted MSI numbers.
Ref genodelabs/genode#4628
Don't skip IRQ reporting if legacy IRQ/GSIs are not supported as the
device may support MSI/MSI-X exclusively.
The commit also enables reserved_memory reporting of devices without
IRQs.
Ref genodelabs/genode#4578
* Add EHCI PCI quirk
* Add UHCI reset to UHCI quirk
* Apply all PCI quirks in order of the PCI bus numbering
otherwise the machine might stall
Ref genodelabs/genode#4578
Instead of allowing the client to set a caching attribute
in the io_mem() call of the device interface, which was
only used to decide in between of the memory being
write-combined or not, remove it from the API.
Instead use the information delivered by the devices ROM,
whether memory from a PCI BAR is prefetchable or not,
to decide whether it is mapped write-combined or not.
Ref genodelabs/genode#4578
Memory descriptors in PCI BARs have a prefetchable bit, which can
be used to optimize memory access when setting, e.g. write-combined
in page-table entries.
Ref genodelabs/genode#4578
The DHCP client used to always send packets with a size of 1024 regardless of
the size of the actual content, which was always significantly lower. 1024
bytes was simply a guess to provide enough space for all types of DHCP client
packets. As we know the exact size of each packet the DHCP client sends even
before packet creation, this commit makes use of the knowledge resulting in
much smaller packets sent by the DHCP client.
Fixes#4619
