The new monitor component at os/src/monitor is the designated successor
of the gdb_monitor. This initial version, however, implements only the
subset needed to inspect the memory of the monitored component(s).
In contrast to the gdb_monitor, the new component supports the monitoring
of multiple components, leveraging the sandbox API. It can therefore be
used as a drop-in replacement for the init component. Like the gdb_monitor,
the new monitor speaks the GDB protocol over Genode's terminal session.
But the protocol implementation does not re-use any gdbserver code,
sidestepping the complexities of POSIX.
There exist two run scripts illustrating the new component. The
os/run/monitor.run script exercises memory inspection via the 'm' command
by letting a test program monitor itself. The os/run/monitor_gdb.run
script allows for the interactive use of GDB to interact with monitored
components.
Issue #4917
"-cpu phenom" does not support all CPU instructions necessary with
gcc 12 toolchain update issuing more SSSE3, e.g. pshufb.
Additionally, remove good/bad Qemu version check of outdated versions.
Issue genodelabs/genode-world#329
Since repos/base/board/pc/devices is empty, the run script no longer
works on PC. Nobody noticed because the use case of this run script -
as development test loop for the ps2 and fb_sdl - are better served by
other scenarios nowadays, e.g., using declaring 'build: ps2' for a
custom Sculpt OS build.
Removed in the context of issue #4860.
This commit introduces support for the HMB feature and will setup the
buffer during start-up. The host-memory-buffer (HMB) feature is mostly
used on NVMe devices that do not make use of an DRAM cache to store its
translation tables amongst other operational data. Not using HMB can
impair the performance on such devices.
The memory is allocated in 2 MiB chunks of DMA-capable memory and its
total size in bytes is configurable via the 'hmb_size' config attribute.
The driver always checks the minimal and preferred size of the HMB and
issues a warning in case it is not enabled via the configuration.
Moreover, if the configured size is less than the minimal amount
required by the device the HMB is not configured at all and a warning
is issued also. If the configured size is more than the preferred size
it will be capped to that amount.
Fixes#4715.
This commit enables users of the VMM to define CPU type and count, RAM size,
kernel and initrd ROM names, GIC version, and Virtio devices to be used.
Derived from the configuration values a flattened device-tree blob (DTB) is
generated and transfered to the VM.
Fixgenodelabs/genode#4670
Implement the guest code in dedicated assembler source file, assemble
and link the binary to vmm_x86. The resulting guest-code binary
populates one page that is mapped to host the reset vector of the guest.
This approach simplifies future guest code adaption resp. extension,
e.g., to test rdmsr/wrmsr exiting.
Fixes#4638
Instead of having a generic "virt_qemu" board use "virt_qemu_<arch>" in
order to have a clean distinction between boards. Current supported
boards are "virt_qemu_arm_v7a", "virt_qemu_arm_v8a", and
"virt_qemu_riscv".
issue #4034
On okl4, pistachio, sel4 the test didn't come up fast enough in order to still
experience the first configuration of NIC router #1. This commit doubles the
lifetime of the first configuration of NIC router #1 to 4 seconds and raises
the overall test timeout accordingly.
Ref #4555
Instead of returning an invalid device capability when a device
is (not yet) available, e.g. a PCI device is requested before the
PCI bus got parsed accordingly, we check the device capability
within the Platform::Connection utilities, and register temporarily
an Io_signal_handler to wait for changes of the devices ROM, and
try the device aquisition again. Thereby, simple drivers so not have
to take the burden to do so.
To enable this feature for all drivers, we always have to export a
devices ROM, but limit the information about physical resources
(I/O memory addresses, IRQ numbers, I/O port ranges) to clients with
'info=yes' in their policy description.
Fixgenodelabs/genode#4496
By adding a 'report' node to the platform driver's configuration
one can enable either devices or config reports. The devices
report contains all devices and their detailed state, as well as
whether it is already in use or not. The config report contains
one by one the current configuration of the platform driver.
Moreover, this commit adds a README file describing the facilities
of the platform driver.
Fixgenodelabs/genode#4386
* Test DHCP RENEW by the test client in the unmanaged variant.
* Add event IDs to log output of test client in order to prevent false positive
result in the managed variant.
* Let managed and unmanaged variant have separate string patterns for
'run_genode_until' because they already had different output and it will
differ even more as we don't want to test DHCP RENEW with the managed
variant.
* Delay first test client DHCP in order to fix unexpected sporadic initial IP
config.
* Remove some unnecessary code from the run script
Fixes#4460
The functionality of the test-block-client, test-block-server, and
test-block-bench components is now covered by the block_tester
application and the vfs_block server.
Issue #4405
Since the change "block_tester: limit batching in sequential test", the
sequence test blocks infinitely when encountering a length value smaller
than the block size.
The commits avoids reading in and allocating memory for all potentially
threads, which are potentially currently not existent (but configured in the
policy beforehand). Instead the policy is read in and evaluated when a thread
is created and policy changes are solely applied to existing/running threads.
By this the commit avoids the increase of memory consumption during the
evaluation of policies during config ROM updates.
Issue #4333
With this commit, the NIC router DHCP client reads out the first DNS domain
name (DHCP option 15) if any from a DHCP reply that generates an IPv4 config
for a domain and stores the name together with the IPv4 config for that domain.
DNS domain names are reported via the new report tag '<dns-domain>' if the
'config' attribute in the config tag '<report>' is set.
Furthermore, the NIC router DHCP server becomes able to obtain a DNS domain
name from another domain that has a DHCP client dynamically (given the config
attribute 'dns_config_from' is set and no static DNS config is given) or
statically from its configuration (new config tag '<dns-domain>') and propagate
this name with DHCP replies (DHCP option 15).
The 'nic_router_dhcp_*' tests are adapted to test the new feautures.
The commit also gets rid of some mirrored files in
'test/nic_router_dhcp/manager'.
Fixes#4246
