This patch removes the SIGNAL service from core and moves its
functionality to the PD session. Furthermore, it unifies the PD service
implementation and terminology across the various base platforms.
Issue #1841
Use the new Sinfo::get_dev_info function to retrieve device information
in the platform-specific get_msi_params function. If the requested
device supports MSI, set the IRQ and MSI address/data register values to
enable MSIs in remappable format (see VT-d specification, section
5.1.2.2).
Currently only one MSI per device is supported as the subhandle in the
data register is always set to 0.
The new Sinfo::get_dev_info function can be used to retrieve information
for a PCI device with given source-id (SID). The function returns false
if no device information for the specified device exists.
The platform-specific get_msi_params function returns MSI parameters for
a device identified by PCI config space address. The function returns
false if either the platform or the device does not support MSI mode of
operation.
Extend the base-hw Irq_session_component class with _is_msi, _address
and _value variables required to support MSI mode of operation.
Return MSI configuration in info() function if _is_msi is set to true.
This commit adds rocket core on the Zynq FPGA support to base HW. It also takes
advantage of the new timer infrastructure introduced with the privileged 1.8 and
adds improved TLB flush support.
fixes#1880
Do not build core-muen_on library without the muen soecifier set.
Do not reference files of the muen contrib directory in the first
pass of make's rule analysis, when parding the muen specific kernel
makefile.
Fix#1859
The new implementation of the FPU and FPU context is taken out to
separate architecture-dependent header files. The generic Cpu_lazy_state
is deleted. There is no hint about the existence of something like an
FPU in the generic non-architexture-dependent code anymore. Instead the
architecture-dependent CPU context of a thread is extended by an FPU
context where supported.
Moreover, the current FPU implementations are enhanced so that threads
that get deleted now release the FPU when still obtaining it.
Fix#1855
This commit enables multi-processing for all Cortex A9 SoCs we currently
support. Moreover, it thereby enables the L2 cache for i.MX6 that was not
enabled until now. However, the QEMU variants hw_pbxa9 and hw_zynq still
only use 1 core, because the busy cpu synchronization used when initializing
multiple Cortex A9 cores leads to horrible boot times on QEMU.
During this work the CPU initialization in general was reworked. From now
on lots of hardware specifics were put into the 'spec' specific files, some
generic hook functions and abstractions thereby were eliminated. This
results to more lean implementations for instance on non-SMP platforms,
or in the x86 case where cache maintainance is a non-issue.
Due to the fact that memory/cache coherency and SMP are closely coupled
on ARM Cortex A9 this commit combines so different aspects.
Fix#1312Fix#1807
On ARM Cortex A9 platforms the external PL310 L2 cache controller
needs to be initialized dependent on the SoC. For instance on Pandaboard
it needs to call the firmware running in TrustZone's secure world,
on i.MX6 it initializes it directly, on other boards it doesn't need
to be initialized at all, because the bootloader already did so.
Therefore, we should implement the PL310 intialization in board specific
code and not in the base class implementation.
Ref #1312
This commit separates certain SMP aspects into 'spec/smp' subdirectories.
Thereby it simplifies non-SMP implementations again, where no locking
and several platform specific maintainance operations are not needed.
Moreover, it moves several platform specifics to appropriated places,
removes dead code from x86, and starts to turn global static pointers
into references that are handed over.
The test threads previously used a stack size independent from the machine
word width. Qemu was previously configured to provide 64Mb of RAM which isn't
sufficient for x86_64.
Ref #1805
Upgrading the quota of a PD session on HW always triggers a "Quota
exceeded" warning. To prevent unecessary debugging effort in the future,
we explain in an in-code comment that the warning is normal.
Ref #1805
When capabilities are delegated to components, they are added to the UTCB of the
target thread. Before the thread is able to take out the capability id out of
the UTCB and adapt the user-level capability reference counter, it might happen
that another thread of the same component deletes the same capability because
its user-level reference counter reached zero. If the kernel then destroys the
capability, before the same capability id is taken out of all UTCBs, an
inconsitent view in the component is the result. To keep an consistent view in
the multi-threading scenario, the kernel now counts how often it puts a
capability into a UTCB. The threads on the other hand hint the kernel when they
took capabilities out of the UTCB, so the kernel can decrement the counter
again. Only when the counter is zero, capabilities can get destructed.
Fix#1623
Likewise on the x86 branch, we have to remove all virtual memory ranges from the
virtual memory allocator that are used by one-by-one mappings of I/O regions
used by the kernel.
Fix#1797
On the USB Armory, we want to secure different devices than on other i.MX53
implementations. Thus, add a board specific configuration that is interpreted
by the kernel Trustzone initialization.
Ref #1497
Enhance the VM state, that can be accessed by a VMM, by a member
'unsigned irq_injection'. In Kernel::Vm::proceed check, whether
irq_injection is set. If so, check whether irq_injection is a
non-secure IRQ. If so, let the PIC raise this IRQ in the VM and reset
irq_injection.
Ref #1497
'block_for_signal' and 'pending_signal' now set pending flag in signal context
in order to determine pending signal. The context list is also used by the
'Signal_receiver' during destruction.
Fixes#1738
Currently, when a signal arrives in the main thread, the signal dispatcher is
retrieved and called from the main thread, the dispatcher uses a proxy object
that in turn sends an RPC to the entry point. This becomes a problem when the
entry point destroys the dispatcher object, before the dispatch function has
been called by the main thread. Therefore, the main thread should simply send an
RPC to the entry point upon signal arrival and the dispatching should be handled
solely by the entry point.
Issue #1738
Destroying an object within the scope of a lambda/functor executed
in the object pool's apply function leads potentially to memory corruption.
Within the scope the corresponding object is locked and unlocked when
leaving the scope. Therefore, it is illegal to free the object's memory meanwhile.
This commit eliminates several places in core that destroyed wrongly in
the object pool's scope.
Fix#1713
* Move the Synced_interface from os -> base
* Align the naming of "synchronized" helpers to "Synced_*"
* Move Synced_range_allocator to core's private headers
* Remove the raw() and lock() members from Synced_allocator and
Synced_range_allocator, and re-use the Synced_interface for them
* Make core's Mapped_mem_allocator a friend class of Synced_range_allocator
to enable the needed "unsafe" access of its physical and virtual allocators
Fix#1697
Instead of holding SPEC-variable dependent files and directories inline
within the repository structure, move them into 'spec' subdirectories
at the corresponding levels, e.g.:
repos/base/include/spec
repos/base/mk/spec
repos/base/lib/mk/spec
repos/base/src/core/spec
...
Moreover, this commit removes the 'platform' directories. That term was
used in an overloaded sense. All SPEC-relative 'platform' directories are
now named 'spec'. Other files, like for instance those related to the
kernel/architecture specific startup library, where moved from 'platform'
directories to explicit, more meaningful places like e.g.: 'src/lib/startup'.
Fix#1673
Instead of returning pointers to locked objects via a lookup function,
the new object pool implementation restricts object access to
functors resp. lambda expressions that are applied to the objects
within the pool itself.
Fix#884Fix#1658
Propagating the user context-pointer from C++ code to the mode
transition assembly doesn't touch any CPU global data. Thus, we can
reduce the in-sync window.
Fixes#1223
Other platforms implement Kernel::Cpu_context stuff in
kernel/cpu_context.cc. On x86_64, it was implemented in
kernel/thread.cc. The commit fixes this inconsistency to the other
platforms.
Ref #1652
The distinction between Kernel::Thread and Kernel::Thread_base is
unnecessary as currently all Hw platforms would have the same content in
the latter class. Thus I've merged Kernel::Thread_base into
Kernel::Thread. Thereby, Kernel::Thread_event can be moved to
kernel/thread.h.
Ref #1652
The Muen-specific PIC implementation provides the irq_occurred()
function which is used to register an IRQ with the PIC upon thread
exception.
The occurred IRQs are stored in a boolean array internally and handed
out to a CPU via take_request().
The driver uses the timer page containing a vector and timer value to
implement the start_one_shot() and value() functions. The timer value
designates the absolute tick count of the next event.
The address of the time page is acquired using the get_memregion_info
Sinfo API function.
The Muen Sinfo API is used to retrieve information about the execution
environment of a subject running on the Muen Separation Kernel.
While the C++ API is defined in sinfo.h, musinfo.h specifies the
internal format of the information stored in the Sinfo pages provided by
the Muen SK. It is a copy of the file contained in the libmusinfo
library of the Muen project. That is the reason why the coding style in
this file differs from the official style.
Move Platform::setup_irq_mode function from x86 platform_support.cc to
x86_64 specific file. This will enable the upcoming x86_64_muen platform
to provide a separate implementation.
The hw_x86_64_muen platform is a x86/64 base-hw kernel which runs as
isolated subject (guest) on the Muen Separation Kernel (SK) [1].
The platform is implemented as an extension to hw_x86_64 replacing the
PIC and timer drivers with paravirtualized variants. The skeleton
contains a dummy PIC and timer implementation for now.
[1] - http://muen.sk
Add spin loop hint by means of the PAUSE instruction since
wait_for_interrupt is called in a busy loop. This should improve processor
performance and reduce power consumption.
Note: HLT cannot be used since it is a privileged instruction and the idle
thread is executed in userspace.
Move the _core_only_mmio_regions function to the
x86_64/platform_support.cc file. This is required to make it overridable
for other platforms deriving from x86.
For most platforms except of NOVA a distinction between pager entrypoint
and pager activation is not needed, and only exists due to historical
reasons. Moreover, the pager thread's execution path is almost identical
between most platforms excluding NOVA, HW, and Fisco.OC. Therefore,
this commit unifies the pager loop for the other platforms, and removes
the pager activation class.
Moves the Bios Data Area header from base-hw to base. Modifies the
base-nova core console that it uses the header as replacement for
the previous BDA bit logic.
Ref #1625
Three things were done:
* Timouts are measured in an asynchronous way to be able to start counters
after the potentially expensive RPC that starts the timeout.
* Timeouts were increased from 45 and 15 seconds to 60 and 20 seconds
because at least on Arndale, results were not stable enough.
* Counting is done on 'unsigned long long' instead of 'unsigned' because
with the higher timeouts, overflows occured.
Fixes#1628
Since the HW-kern-caps commit, there was a bug in the Platform_thread
constructor. When called for a user thread, the constructor stated 0
as CPU quota at the Kernel_object instead of its quota input-paramater.
Fixes#1620
Instead of using the Genode user-level signal API to signal page-faults to
a page-fault handler, use the kernel API directly. Thereby the accounting
of signal contexts needed for each paging subject can be done easily.
Fix#956
Moreover, be strict when calculating the page-table requirements of
core, which is architecture specific, and declare the virtual memory
requirements of core architecture-wise.
Ref #1588
The ~Irq_session_component relied on the IRQ number obtained by the
corresponding kernel IRQ object to mark the IRQ as free at the IRQ
allocator. However, since the kernel IRQ object is initialized not
before the 'sigh' function is called, the IRQ of sessions that
never called 'sigh' could not be freed correctly. This patch fixes
the problem by not relying on the kernel IRQ object for obtaining
the number in the destructor but using the '_irq_number' member
variable instead.
Instead of organizing page tables within slab blocks and allocating such
blocks dynamically on demand, replace the page table allocator with a
simple, static alternative. The new page table allocator is dimensioned
at compile-time. When a PD runs out of page-tables, we simply flush its
current mappings, and re-use the freed tables. The only exception is
core/kernel that should not produce any page faults. Thereby it has to
be ensured that core has enough page tables to populate it's virtual
memory.
A positive side-effect of this static approach is that the accounting
of memory used for page-tables is now possible again. In the dynamic case
there was no protocol existent that solved the problem of donating memory
to core during a page fault.
Fix#1588
This patch enable clients of core's TRACE service to obtain the
execution times of trace subjects (i.e., threads). The execution time is
delivered as part of the 'Subject_info' structure.
Right now, the feature is available solely on NOVA. On all other base
platforms, the returned execution times are 0.
Issue #813
Add a Platform::setup_irq_mode function which enables the IRQ session to
update the trigger mode and polarity of the associated IRQ according to
the session parameters. On ARM this function is a nop.
This change enables the x86_64 platform to support devices which use
arbitrary trigger modes and polarity settings, e.g. AHCI on QEMU and
real hardware.
Fixes#1528.
Because of helping, it is possible that a core thread that wants to
destroy another thread at the kernel is using the scheduling context of
the thread that shall be destroyed at this point in time. When building
without GENODE_RELEASE defined, this always triggers an assertion in the
kernel. But when building with GENODE_RELEASE defined, this might silently
lead to kernel-memory corruption. This commit eliminates the latter case.
Should be reverted as soon as the scheduler is able to remove its head.
Ref #1537
Placement new can be misleading, as we already overload the new operator
to construct objects via pointers to allocators. To prohibit any problems here,
and to use one consistent approach, we can explicitely construct the object
with the already available 'construct_at' template function.
Ref #1443
* Introduce a hw specific Address_space interface for protection
domains, which combines all memory-virtualization related functionality
* Introduce a core-specific Platform_pd object that solves all the hen-egg
problems formerly distributed in kernel and core-platform code
Ref #595
Ref #1443
The assumption that IRQs in the legacy ISA range are always
edge-triggered is wrong. For the free-for-use IRQs it depends on the
actual device which uses the specific IRQ. Therefore, treat IRQs 9, 10
and 11 as level-triggered.
Enable a platform to specify how the MMIO memory allocator is to be
initialized. On ARM the existing behavior is kept while on x86 the I/O
memory is defined as the entire address space excluding the core only
RAM regions. This aligns the hw_x86_64 I/O memory allocator
initialization with how it is done for other x86 kernels such as NOVA or
Fiasco.
Perform lazy-initialization of FPU state when it is enabled for the
first time. This assures that the FXSAVE area (including the stored
MXCSR) is always properly setup and initialized to the platform default
values.
Perform all FPU-related setup in the Cpu class' init_fpu function instead of
the general system bring-up assembly code.
Set all required control register 0 and 4 flags according to Intel SDM Vol. 3A,
sections 9.2 and 9.6 instead of only enabling FPU error reporting and OSFXSR.
In the past, when the user blocked for an IRQ signal, the last signal was
acknowledged automatically thereby unmasking the IRQ. Now, the signal session
got a dedicated RPC for acknowledging IRQs and the HW back-end of that RPC
acknowledged the IRQ signal too. This led to the situation that IRQs were
unmasked twice. However, drivers expect an interrupt to be unmasked only on
the Irq_session::ack_irq and thus IRQ unmasking was moved from
Kernel::ack_signal to a dedicated kernel call.
Fixes#1493
Physical CPU quota was previously given to a thread on construction only
by directly specifying a percentage of the quota of the according CPU
session. Now, a new thread is given a weighting that can be any value.
The physical counter-value of such a weighting depends on the weightings
of the other threads at the CPU session. Thus, the physical quota of all
threads of a CPU session must be updated when a weighting is added or
removed. This is each time the session creates or destroys a thread.
This commit also adapts the "cpu_quota" test in base-hw accordingly.
Ref #1464
This patch adds const qualifiers to the functions Allocator::consumed,
Allocator::overhead, Allocator::avail, and Range_allocator::valid_addr.
Fixes#1481
Instead of handing over object ids to the kernel, which has to find them
in object pools then, core can simply use object pointers to reference
kernel objects.
Ref #1443
Instead of having an ID allocator per object class use one global allocator for
all. Thereby artificial limitations for the different object types are
superfluent. Moreover, replace the base-hw specific id allocator implementation
with the generic Bit_allocator, which is also memory saving.
Ref #1443
The verb "bin" in the context of destroying kernel objects seems pretty
unusual in contrast to "delete". When reading "bin" in the context of
systems software an association to something like "binary" is more likely.
Ref #1443
* Instead of using local capabilities within core's context area implementation
for stack allocation/attachment, simply do both operations while stack gets
attached, thereby getting rid of the local capabilities in generic code
* In base-hw the UTCB of core's main thread gets mapped directly instead of
constructing a dataspace component out of it and hand over its local
capability
* Remove local capability implementation from all platforms except Linux
Ref #1443
Enable platform specific allocations and ram quota accounting for
protection domains. Needed to allocate object identity references
in the base-hw kernel when delegating capabilities via IPC.
Moreover, it can be used to account translation table entries in the
future.
Ref #1443
There are lots of places where a numeric argument of an argument string
gets extraced as signed long value and then assigned to an unsigned long
variable. If the value in the string was negative, it would not be
detected as invalid (and replaced by the default value), but become a
positive bogus value.
With this patch, numeric values which are supposed to be unsigned get
extracted with the 'ulong_value()' function, which returns the default
value for negative numbers.
Fixes#1472
There were two bugs. First, the caller of Kernel::await_signal wasn't
re-activated for scheduling. Second, the caller did not memorize that he
doesn't wait on a receiver anymore which had bad side effects on further
signal handling.
Fix#1459
The port uses the Cortex-A9 private timer for the kernel and an EPIT as
user timer. It was successfully tested on the Wandboard Quad and the CuBox-i
with the signal test. It lacks L2-cache and Trustzone support by now.
Thanks to Praveen Srinivas (IIT Madras, India) and Nikolay Golikov (Ksys Labs
LLC, Russia). This work is partially based on their contributions.
Fix#1467
Do not mask edge-triggered interrupts to avoid losing them while masked,
see Intel 82093AA I/O Advanced Programmable Interrupt Controller
(IOAPIC) specification, section 3.4.2, "Interrupt Mask":
"When this bit is 1, the interrupt signal is masked. Edge-sensitive
interrupts signaled on a masked interrupt pin are ignored (i.e., not
delivered or held pending)"
Or to quote Linus Torvalds on the subject:
"Now, edge-triggered interrupts are a _lot_ harder to mask, because the
Intel APIC is an unbelievable piece of sh*t, and has the edge-detect
logic _before_ the mask logic, so if a edge happens _while_ the device
is masked, you'll never ever see the edge ever again (unmasking will not
cause a new edge, so you simply lost the interrupt)."
So when you "mask" an edge-triggered IRQ, you can't really mask it at
all, because if you did that, you'd lose it forever if the IRQ comes in
while you masked it. Instead, we're supposed to leave it active, and set
a flag, and IF the IRQ comes in, we just remember it, and mask it at
that point instead, and then on unmasking, we have to replay it by
sending a self-IPI." [1]
[1] - http://yarchive.net/comp/linux/edge_triggered_interrupts.html
Ref #1448
In order to match the I/O APIC configuration, a request for user timer
IRQ 0 is remapped to vector 50 (Board::TIMER_VECTOR_USER), all other
requests are transposed by adding the vector offset 48
(Board::VECTOR_REMAP_BASE).
* Enable the use of the FXSAVE and FXRSTOR instructions, see Intel SDM
Vol. 3C, section 2.5.
* The state of the x87 floating point unit (FPU) is loaded and saved on
demand.
* Make the cr0 control register accessible in the Cpu class. This is in
preparation of the upcoming FPU management.
* Access to the FPU is disabled by setting the Task Switch flag in the cr0
register.
* Access to the FPU is enabled by clearing the Task Switch flag in the cr0
register.
* Implement FPU initialization
* Add is_fpu_enabled helper function
* Add pointer to CPU lazy state to CPU class
* Init FPU when finishing kernel initialization
* Add function to retry FPU instruction:
Similar to the ARM mechanism to retry undefined instructions, implement a
function for retrying an FPU instruction. If a floating-point instruction
causes an #NM exception due to the FPU being disabled, it can be retried
after the correct FPU state is restored, saving the current state and
enabling the FPU in the process.
* Disable FPU when switching to different user context:
This enables lazy save/restore of the FPU since trying to execute a
floating point instruction when the FPU is disabled will cause a #NM
exception.
* Declare constant for #NM exception
* Retry FPU instruction on #NM exception
* Assure alignment of FXSAVE area:
The FXSAVE area is 512-byte memory region that must be 16-byte aligned. As
it turns out the alignment attribute is not honored in all cases so add a
workaround to assure the alignment constraint is met by manually rounding
the start of the FXSAVE area to the next 16-byte boundary if necessary.
The LAPIC timer is programmed in one-shot mode with vector 32
(Board::TIMER_VECTOR_KERNEL). The timer frequency is measured using PIT
channel 2 as reference (50ms delay).
Disable PIT timer channel 0 since BIOS programs it to fire periodically.
This avoids potential spurious timer interrupts.
The implementation initializes the Local APIC (LAPIC) of CPU 0 in xapic
mode (mmio register access) and uses the I/O APIC to remap, mask and
unmask hardware IRQs. The remapping offset of IRQs is 48.
Also initialize the legacy PIC and mask all interrupts in order to
disable it.
For more information about LAPIC and I/O APIC see Intel SDM Vol. 3A,
chapter 10 and the Intel 82093AA I/O Advanced Programmable Interrupt
Controller (IOAPIC) specification
Set bit 9 in the RFLAGS register of user CPU context to enable
interrupts on kernel- to usermode switch.
Make the local APIC accessible via its MMIO region by adding a 2 MB
large page mapping at 0xfee00000 with memory type UC.
Note: The mapping is added to the initial page tables to make the APIC
usable prior to the activation of core's page tables, e.g. in the
constructor of the timer class.
The location in memory is arbitrary but we use the same address as the
ARM architecture. Adjust references to virtual addresses in the mode
transition pages to cope with 64-bit values.
