The driver wrongfully disabled all APs if it was configured with an
auto-connect list containing multiple APs when one of those was
disabled as a result of using wrong credentials.
This commit changes the way network enable- and disablement are
handled by only operating on the given access-point in question.
It also removes unused code touched by these changes.
Thanks to Peter for bringing this problem to our attention.
Fixes#4517.
There is a race between the trace subject doing the buffer
initialization and the monitor trying to iterate the buffer entries. If
the monitor tries to iterate entries of an uninitialized buffer, it will
read the very first entry twice. The monitor should therefore only start
iteration when the buffer has been initialised.
genodelabs/genode#4513
By declaring the generated menu_view_styles.tar archive as build
artifact, it is automatically picked up whenever menu_view appears as
build ingredient of sculpt.
build: app/menu_view
* Prevent page-faults when the active interface of a device got unset
during elimination of the device
* Resets devices, where a corresponding session got closed to
be re-useable when a new session gets opened
Ref #4512
* Instead of repeatedly spam the log with errors and
bring heavy load to the USB host controller driver
abort yourself when the device vanishs
Fixgenodelabs/genode#4515
With this commit, the Xoroshiro128+ PRNG in lx_emul/random.cc gets wrapped
by a new class that automatically re-seeds the PRNG with jitterentropy every
1024 * 1024 + random(0..4095) bytes of generated output.
Ref #4397
Both the Wifi driver and the WireGuard port used local implementations for
their source of randomness. Wifi used a Xoroshiro128+ PRNG for rapid generation
of random values but initialized this PRNG always with the same static seed
value. WireGuard, in contrast, requested each random byte directly from the
jitterentropy lib, which is considered to be very time intensive.
This commit removes the local variants of random.cc and introduces a new
centralized lx_emul/random.cc . The new variant combines the former approaches,
so, that jitterentropy is accessed only in order to generate a random seed for
a Xoroshiro128+ PRNG. Front-end requests for random values are then fulfilled
efficiently via the PRNG.
:Warning:
The output of the Xoroshiro128+ PRNG that is used in the new implementation of
the lx_emul randomness functions has known statistical problems (see
https://en.wikipedia.org/wiki/Xoroshiro128%2B#Statistical_Quality).
Furthermore, the integration of Xoroshir128+ with the lx_emul code was not
reviewed/audited for its security-related properties, so far, and has the
known deficiency of seeding the PRNG only once during initialization. Thus,
we strongly advise against the use of the lx_emul randomness functions for
security-critical purposes.
Ref #4397
This patch simplifies the use of the menu_view in scenarios where no
absolute motion events but only touch events occur. Previously, such
scenarios required the creation of artificial absolute motion events
via the event filter.
Issue #4514
The hover state is evaluated for the routing of input events. When
routing a touch event, the decision should be based on the most recently
observed touch position. Without this patch, however, the hover state kept
referring to the initial pointer position (screen center) in the absence
of any other motion events.
Issue #4514
A userland component that ports the Linux WireGuard kernel module (originally
from kernel version 5.14.21) and integrates it via a NIC session (public
network side) and an Uplink session (private network side). The
WireGuard-specific device configuration is done through the component
configuration. The port is done using lx_emul, lx_kit and the virt_linux
targets. The commit adds also 4 corresponding run scripts of which 3 are fully
automated of which 1 is added to the autopilot.
:Warning:
Although in principal functioning, the WireGuard port has not been exposed to a
sufficient amount of real-world testing, so far. Therefore, we strongly
recommend not to use it in any security-critical scenarios! There is no
guarantee that the port meets any of the security goals pursued by the
WireGuard protocol or other WireGuard implementations!
Ref #4397
The implementation was copied from the already existing LX-emul implementation
for x86 but the commit additionally page-aligns the array that serves as
backing store for the zero page as we assume this to be expected by the contrib
code. However, this commit doesn't apply the alignment also to the x86
implementation as we agreed, that this should be done in a separate commit.
Ref #4397
* Adds methods for copying raw data to the data field of Ethernet frames and
UDP packets. This is used in the port to wrap the higher-layer packet data
prepared by the contrib code with the additionally required headers before
sending it at a network session.
* Adds a method to cast raw data to an IPv4 packet. This is required in the
port in order to check values in stand-alone IP packets produced by the
contrib code before sending them at a network session.
* Adds methods for setting UDP ports given big endian port values without
having to convert to little endian in the app and then back to big endian in
the net lib.
Ref #4397
The driver did not allow for setting module parameters and so far
no one complained. Remove the option to prevent the misleading of
users.
Issue #4506.
Since Linux does not use the arch-independent spinlock structs for ARM,
we must use different members when accessing the lock value.
genodelabs/genode#4499
to work again. The drivers interactive package does not provide a Platform
service anymore, so remove the audio driver. A lot more mesa related libraries
are required now.
This commit de-duplicates the redundant dummy implementations and
to some degree also the 'lx_emul.c' implementations while also
decluttering the various 'dep.list' files.
The code is moved into 'src/lib/pc/lx_emul' where it becomes part
of the 'pc_lx_emul' library.
Fixes#4500.
Instead of each driver providing its own header file use a central
header as the initcall order header should cover _all_ provided
initcalls resulting from the used 'pc_linux' kernel config.
Note that the 'pc_linux' configuration was extended with the
'USB_USBNET' option because the module's initcall is needed for the
Genode C API for USB glue-code and the 'PACKET' option needed by
the wireless lan driver.
The lack of theses options was not noticed as each driver used its
own initcall header so far that stemmed from the initial porting
effort.
Issue #4500.
* Some fixups for the README
* Make config ROM const when used for the session policies
* Turn Reporter into Expanding_reporter
* Always first register ROM signal handler before parsing it the first time
Outsource parts of the Main object into a common compound object,
common parts of the Makefile description and depot source package.
Fixgenodelabs/genode#4503
* Parse PCI specific information from devices ROM
* Enable DMA, I/O memory and I/O port access dependent on BARs in config space
* Introduce device PD for Nova + IOMMU support
* Enable MSIs if available
* Add PCI specific policy rules
Fixesgenodelabs/genode#4502
Instead of returning an invalid device capability when a device
is (not yet) available, e.g. a PCI device is requested before the
PCI bus got parsed accordingly, we check the device capability
within the Platform::Connection utilities, and register temporarily
an Io_signal_handler to wait for changes of the devices ROM, and
try the device aquisition again. Thereby, simple drivers so not have
to take the burden to do so.
To enable this feature for all drivers, we always have to export a
devices ROM, but limit the information about physical resources
(I/O memory addresses, IRQ numbers, I/O port ranges) to clients with
'info=yes' in their policy description.
Fixgenodelabs/genode#4496
By adding a 'report' node to the platform driver's configuration
one can enable either devices or config reports. The devices
report contains all devices and their detailed state, as well as
whether it is already in use or not. The config report contains
one by one the current configuration of the platform driver.
Moreover, this commit adds a README file describing the facilities
of the platform driver.
Fixgenodelabs/genode#4386
If PCI devices happen to miss complete configuration after boot, the
platform driver supports <pci-fixup> nodes for concrete devices
(specified by bus-device-functions tuples). The
<bar> node instructs the platform driver to remap BAR id 0 to address
0x4017002000, which amends the BIOS configuration and is stringently
required for BARs with address 0.
! <pci-fixup bus="0" device="0x15" function="3">
! <bar id="0" address="0x4017002000"/>
! </pci-fixup>
The issue was discovered with Intel LPSS devices in Fujitsu notebooks.
Fixes#4501
This patch changes the libc to query the stack size from the
config attribute <libc> <stack size=""/> </libc> for regular
components, not only cloned processes.
To discharge the generic platform driver from certain PCI bus scanning,
and ACPI + kernel specifics, this commit introduces a new component,
which consumes the acpi drivers report and the platform_info from core
to prepare a devices ROM for the platform driver that contains all
PCI devices and its resources.
Fixgenodelabs/genode#4495
USB Attached SCSI devices might expose a bulk-only interface
as fall-back at interface 0 and alternate setting 0. This commit
allows for probing all alternate settings of the active interface
to be able to use such devices.
The configuration was extended so that in case the device interface
is known beforehand the driver can be configured accordingly.
Fixes#4494.
Deploying an overly large meta-pkg in Sculpt leads to an
'Xml_generator::Buffer_exceeded' exception. Using the expanding
reporter solves this problem.
Fixes#4493.
In case we are instructed to reauthenticate and were already
authenticated we ignore the request in the management layer
and let 'wpa_supplicant' deal with that.
Fixes#4488.
The vanilla NOVA kernel solely supports tracking and exporting of execution
times per SC kernel object, but not per thread (EC object). The commit extends
to track execution times per EC in the NOVA kernel, exporting it to Genode's
'core' roottask and populating Genode's Trace::Subject_info structure.
Fixes#4481
Remove handling of ACPI (SCI) interrupt from kernel and thereby let the
handling of the ACPI irq exclusively to an Genode driver. On Genode the ACPICA
library+app handles the ACPI irq, where we can now remove the contrib patches
related to the synchronization between NOVA kernel and ACPICA library.
Fixes#4479
When using the framebuffer driver on this machine the
'cpu_latency_qos_request_active' dummy is triggered. Removing the
trace-and-stop call makes the driver usable.
In addition, 'cpu_latency_qos_remove_request' is changed as well
although it is guarded by 'cpu_latency_qos_request_active'.
Fixes#4489.
This patch fixes rare freezes of menu view instances, which could happen boot
time whenever the leitzentale GUI happens to get initialized before the display
driver finished setting up a reasonable mode. In this case, the resolution-
dependent font size can temporarily get almost zero, tripping up the glyph
renderer.
Since the driver relies on all requests being Nvme::MPS_LOG2 aligned
as advertised in its Block::Info the added check will reject any
misaligned requests (using 'gpt_write' led to an IOMMU write fault).
Issue #4486.
2560x1440 resolutions require more RAM resources. Additionally, make
sure that the decorator 'init' receives enough CAPs to service the
decorator configuration.
fixes#4485
* Claim and release USB interfaces
* Collect URBs in flight in anchor list
* When releasing interfaces, wait until all
anchored URBs finally got killed successfully
Fixgenodelabs/genode#4483
In rare cases it is necessary to execute Linux contributed code
until certain work is finished, e.g. when in a synchronous RPC call,
a session construction or destruction a result is needed. Therefore,
we introduce a new lx_emul function called lx_emul_execute_kernel_until.
Ref genodelabs/genode#4483
To signal that a device gets used and released by a session
introduce claim, release, and release all callbacks in the
USB interface of the C-API.
Ref genodelabs/genode#4483
In case multiple devices shared the same memory-mapped I/O page
we have to take the offset into account. This commit fixes the
'pc_usb_host_drv' on the Thinkpad X201 where the two EHCI host
controller share the some I/O memory page.
Fixes#4477.
With the new usb driver #4399 and usage of the updated dde_linux lx_eml/lx_kit
approach a much higher rate of IRQ session construction/destruction and signal
handler assignment (irq->sigh) are caused. This trickles down to the kernel,
which causes an hang of the AMD IOMMUs due to not setting reserved bits
adequately. The commit fixes the root cause in the kernel and add a guard
into core's to limit such driver behaviour.
Fixes#4482
The file listed only enabled="false" in the audio adapter tag. However,
setting only this option to true isn't sufficient for guest audio to work.
One has to set also enabledIn respectively enabledOut in the same tag. The
new default vbox6 file reflects this.
Fixes#4476
This patch fixes a potential data corruption issue that could occur when
issuing large I/O requests to vfs/rump, which don't fit into the default
block I/O buffer of 128 KiB. Note that we haven't observed the problem
in practice (Sculpt hosts vfs/rump in a dedicated vfs server, which
fragments requests) but spotted the issue while reviewing the code. We
could trigger problem by explicitly changing the I/O buffer size to 32
KiB.
Issue #4474
This patch changes the meaning of the 'offset' parameter of the
'produce_write_content' and 'consume_read_result' hook functions.
The value used to reflect the absolute byte position but in practice,
a job-relative byte offset is desired.
Issue #4474
