Before this commit, the block-request handler was implemented as
Io_signal_handler and, additionally, the USB driver called the
block-request handler on request completion directly on I/O level. This
is generally a bad idea because I/O handlers should avoid to have direct
global side effects. In contrast, application logic should be
implemented in way that it consumes atomic state changes after I/O
completed. Now USB I/O completion locally submits a signal to the
block-request Signal_handler.
This patch reduces the response time of supposedly stuck situations like
an unresponsive part_block component. First, it reduces the heartbeat
rate from 1 to 2 seconds to make it consistent with the frequency of
state reports. Second, it allows up to four skipped heartbeats until
regarding the situation as stuck. With those changes, the prolonged
initialization sequence of a USB ZIP drive succeeds with Sculpt.
The Uplink_test used to end in an uncaucht exception about a failed packet
allocation on several x86_32 platforms.
* Destruct and re-construct the corresponding TX packet allocator during a
link-down-up step in the Uplink test. Fixes the exceptions but results in a
never ending test.
* Decouple the link-down-up steps from the handling of packet stream signals
by simply triggering it with a local periodic timeout of 1 sec period.
This prevents that the Uplink_test never finishes because it destructs the
Uplink connection too often.
* The test finishes not before at least 3 link-down-up steps were executed.
* Replace the Allocator_avl's used for the TX packet allocators of the Nic
and Uplink Connection with the better suited Nic::Packet_allocator.
Ref #4419
The error message
"Command buffer creation failed" in intel_dsb.c repeatedly appears
during connector hotplug. Since the driver works also without this DMA offload
optimization, disable the functionality.
Issue #4450
The service is merely announced but trying to request a session always causes a
Service_denied exception. This helps in scenarios where the client is
won't open a session anyway but expects the service to be available. This is
considered a temporary solution.
Ref #4419
This patch handles the corner case of switching virtual desktops while
child views are visible. Examples of such child views are tool tips,
pull-down menus, or the graph of the top-view utility. The switch to
another virtual desktop would implicitely turn the child views into
top-level views of the root nitpicker GUI server until switching back
to the original virtual desktop.
The patch implements the expected behavior of hiding all child views
that belong to a disappearing top-level view.
As it stands, the implementation requires minimal reflection measures to
implement correct cleanup procedure. static_cast<> cannot be used as it
does not implement runtime type casting as dynamic_cast<> does.
This patch reverts the vfs-watch-handle creation whenever the subsequent
allocation of the VFS server's 'Watch' object fails. This can happen
when the session RAM or cap quota is depleted.
Fixes#4472
The issue came apparent with Windows Guests and USB passthrough of
smart-card readers. If the VM is powered off, PDMR3Term cleans up all
devices incl. (first) acpi and (later) devxhci. The latter used a
dangling reference to ACPI structs in a indirect call to
apicIsLogicalDest() from xhciR3Destruct().
VMMR3_INT_DECL(int) PDMR3Term(PVM pVM)
virtualbox6/src/VBox/VMM/VMMR3/PDM.cpp:817
"apic" (pDevIns->pReg->szName)
static void apicR3TermState(PVM pVM)
virtualbox6/src/VBox/VMM/VMMR3/APIC.cpp:1235
"qemu-xhci" (pDevIns->pReg->szName)
static DECLCALLBACK(int) xhciR3Destruct(PPDMDEVINS pDevIns)
repos/ports/src/virtualbox6/devxhci.cc:431
void usb_detach(USBPort *port)
<qemu-usb>/src/lib/qemu/hw/usb/core.c:70
static void xhci_port_notify(XHCIPort *port, uint32_t bits)
<qemu-usb>/src/lib/qemu/hw/usb/hcd-xhci.c:2592
static DECLCALLBACK(void) pciSetIrq(PPDMDEVINS pDevIns, PPDMPCIDEV pPciDev, int iIrq, int iLevel, uint32_t uTagSrc)
virtualbox6/src/VBox/Devices/Bus/DevPCI.cpp:398
static bool apicIsLogicalDest(PVMCPUCC pVCpu, uint32_t fDest)
virtualbox6/src/VBox/VMM/VMMAll/APICAll.cpp:797
The fix removes our Qemu library reset from xhciR3Destruct() and
registers xhciR3Reset() as PowerOff hook.
Thanks to Raphael for the thorough investigation.
The quota adjustments prevent the leitzentrale's decorator from running
out of RAM, and allow the nitpicker GUI server to preserve buffer
content during resize (reducing flickering artifacts) when using a
screen resolution up to 2560x1440.
This fixes the following warning when building the binary archive:
Library-description file vfs_capture.mk is missing
Library-description file vfs_tap.mk is missing
'Platform::Device_pd::attach_dma_mem' may lead to insufficient resources
for meta data, which is reflected to the client via 'Out_of_caps' or
'Out_of_ram'. In case the client upgrades its session the quotas need to
be passed to core as done by
'Platform::Device_pd::Expanding_region_map_client::attach'.
issue #4451
Use 'avail_caps' and 'avail_ram' for resource guards because 'used_caps'
and 'used_ram' do not account for resources given to the platform
driver. This lead to incorrect resource accounting by the GPU
multiplexer.
issue #4451
The calculations of packet_size and packet_count in the block_io() did
not consider rounding errors. This resulted in diverging values over
several bisecting operations (/= 2) and wrongly-size packet allocations
as well as memcpy operations.
Related to #2263 (comments about partial block accesses and
_block_io()).
Fixes#4471
The NIC router used to handle each type of packet-stream signal with a distinct
method in the Interface class. However, merging those methods has advantages.
It ensures that sent packets that were already acknowledged by the counter side
are always released before handling received packets. This frees packet stream
memory which facilitates the potential allocation of response packets while
handling received packets. Furthermore, it simplifies the code and reduces the
number of entry points into the router.
This commit also removes the installation of signal handlers at packet streams
for events that are of no interest for the router (TX-ready-to-ack /
RX-ready-to-submit at NIC sessions and RX-ready-to-ack / TX-ready-to-submit at
Uplink sessions).
Fixes#4470
The driver falls in line with the previous 'legacy_wifi_drv' component
where the ported wireless LAN stack and device driver is encapsulated
in a library. This library in return is used by the 'Libc::Component'
providing the necessary environment for the 'wpa_supplicant'.
In constrast to the old driver a 'wifi' VFS plugin is in charge of
initalizing the 'Lx_kit::Env' prior to executing any static
constructors.
Fixes#4455.
Move 'linux-firmware' portion from 'dde_linux' into its own port,
while it is used by the upcoming new WLAN driver keep it in place
for the legacy one.
Issue #4455.
Various libraries, like libnl and wpa_driver_nl80211, used hardcoded
values for the interface index (ifindex) and name (ifname).
To accomdate the legacy as well as the upcoming new driver we add
functions to query these information where at least the index differs.
Issue #4455.
The location of the used 'source.list' file is hard-coded and will not
work when the ported driver is implemented as a shared library. For
this use-case provide means to set the location differently.
Issue #4455.
In case where the ported driver or protocol stack is executed from
an already managed environment, e.g. the libc, the execution
of the static constructors will be performed at the appropriate
time.
Issue #4455.
Whenever the nic_router encounters ARP requests on an interface
that does not have a valid IP config it will ignore them. However,
When increasing the verbosity of the component for diagnostic
purposes the resulting 'Bad network protocol' message is misleading.
Issue #4455.
* Test DHCP RENEW by the test client in the unmanaged variant.
* Add event IDs to log output of test client in order to prevent false positive
result in the managed variant.
* Let managed and unmanaged variant have separate string patterns for
'run_genode_until' because they already had different output and it will
differ even more as we don't want to test DHCP RENEW with the managed
variant.
* Delay first test client DHCP in order to fix unexpected sporadic initial IP
config.
* Remove some unnecessary code from the run script
Fixes#4460
The NIC router did update the IP config of a domain on a completed DHCP
REQUEST but not on completed DHCP RENEW or DHCP REBIND. Thus, it didn't adapt
to "real" DHCP servers (not NIC router servers) that got restarted with a
changed configuration by the means of RENEW/REBIND. The commit fixes this.
Note, that testing this is complicated as we don't have the necessary
infrastructure (we cannot simply use the DHCP server of the NIC router as this
would apply a link down/up sequence in order to let the client restart DHCP)
Ref #4460
After reverting unused ranges during allocator destruction
'_meta_data.free_empty_blocks' may lead to more unused ranges because
meta data blocks maybe freed where the meta data for the blocks is
managed by other meta data blocks. This leads to dangling allocation
warnings which are caused by meta data. Therefore, we call
'_revert_unused_ranges' and 'free_empty_blocks' until no more ranges
can be freed.
issue #4466
by using the io_mem RPC of the platform session instead of parsing the
bar resources manually. This commits avoids and breakage on systems where
the Intel graphic cards just uses 64bits with addresses above 4G.
Issue #4450
Compared to the bytewise memset, a wordwise memset (or even multi-word)
achieves a speedup of ~6.
On Zynq-7000/Cortex-A9:
317 MiB/s -> 2040 MiB/s
On base-linux x86_64:
3580 MiB/s -> 23700 MiB/s
genodelabs/genode#4456
Preloading a few cache lines ahead brings a significant speedup in
memcpy throughput. Note, the particular (optimal) value was empirically
determined on a Cortex-A9 (Zynq-7000) SoC @ 666Mhz. It is best combined
with L2 prefetching enabled (including double linefills and prefetch
offset 7). Yet, even without L2 prefetching this seems to be the sweet
spot.
genodelabs/genode#4456
The implementation is not in use any more. Furthermore, on typical ARM
cores such as the Cortex-A9, the cached read appears to be the
bottleneck rather than instruction density. On a Zynq-7000 SoC, the vfp
implementation performed significantly worse than the standard load/store
multiple implementation with preloading.
genodelabs/genode#4456
When executed on Linux, the test was impaired by the copy-on-write
optimisation since the source buffer was never initialised. By default,
Linux only maps a zeroed page until the first write access to the page
occurs. Since the source buffer was never written, the corresponding
page was always present in the physically-indexed data cache. In
consequence, the test merely measured write performance (similar to memset).
genodelabs/genode#4454
Send usb ctrl transfers with one second timeout as some devices (e.g.,
smartcard readers) do not response to certain control transfers.
Thanks to Peter for the investigation.
The i2c code has a busy loop (see commit for the location), which expects that
the jiffies advances without a cooperative scheduling decision.
Issue #4450
Our usb_host driver supports UHCI, OHCI, EHCI, and XHCI host
controllers. The USB4 host interface / Thunderbolt is currently not
supported and must therefore not be passed to the USB host driver.
If any PCI device reports 0 as interrupt PIN, drivers may try to force
MSI setup (e.g., xhci). So, we clamp the interrupt PIN to 1 to let
drivers finish initialization and don't bother the platform driver.
Encountered on the Fuji5 where for reasons currently unknown the
first xHCI HC (0:0d.0) could not be initialize due to incomplete
interupt informations. The other HCs appear to work fine (tested
with a USB low-speed mouse).
This commit removes all physical notions from the information given
to the Linux kernel regarding PCI BARs.
With the exception for the host bridge that needs to be located at
'0:00.0' as required by the Intel FB driver, all other devices are
announced at the PCI BUS in an ascending order.
Additionally the MMIO regions start at 1 GiB and are capped at 32 bit
to prevent unnecessary access to 64 bit addresses.
With this fix, the driver no longer aborts on the Tigerlake notebook and
just skips the out-of-region ACPI table. Issue #4452 is not fixed by
this commit, but in this specific case the table is not used anyway.
Upgrade to the well known worst cases by the GPU multiplexer. Do not
keep track of resources locally, in case resources are exceeded the
remain so anyway.
issue #4451
Check if there are a least 4 caps + 2MB (heap) + possible buffer size
available before any resource allocation. Only account resources that are
actually used.
issue #4451
The former implementation relied on the behaviour of how the old
intel fb driver requested the pci devices. The new lxkit however actually
really want to have all available pci devices.
Issue #4450
required by the upcoming update of the intel display driver. Make this addition
explicit, because it triggers adjustment also on the new pc_usb_host_drv.
Issue #4450
If size is zero, the platform goes out of service by:
[init -> platform_drv] Error: Uncaught exception of type 'Genode::Ram_allocator::Denied'
[init -> platform_drv] Warning: abort called - thread: e
Issue #4450
Also, the repository URL was adapted to the permanent redirect to github
to prevent the following warning.
dde_ipxe download http://git.ipxe.org/ipxe.git
dde_ipxe git Cloning into 'src/lib/dde_ipxe'...
dde_ipxe git warning: redirecting to https://github.com/ipxe/ipxe/
dde_ipxe update src/lib/dde_ipxe
This patch adds the trace-logger utility to the default set of packages
along with an optional launcher. With this change, only two steps are
needed to use Genode's tracing mechanism with Sculpt:
- Add 'trace_logger' to the 'launcher:' list of the .sculpt file
- Either manually select the 'trace_logger' from the '+' menu,
or add the following entry to the deploy configuration:
<start name="trace_logger"/>
By default, the trace logger is configured to trace all threads
executed in the runtime subsystem and to print a report every 10
seconds. This default policy can be refined in the launcher's <config>
node. Note that the trace logger does not respond to configuration
changes during runtime. Changes come into effect not before restarting
the component.
Issue #4448
This patch changes the output format of the trace logger to become
better suitable for human consumption. For example, when instrumenting
the VFS server in Sculpt using the GENODE_TRACE_TSC utility, the
trace logger now generates tabular output as follows.
Report 4
PD "init -> runtime -> arch_vbox6 -> vbox -> " ----------------
Thread "vCPU" at (0,0) total:12909024 recent:989229
Thread "vCPU" at (1,0) total:5643234 recent:786437
PD "init -> runtime -> ahci-0.fs" -----------------------------
Thread "ahci-0.fs" at (0,0) total:910497 recent:6335
Thread "ep" at (0,0) total:0 recent:0
71919692932: TSC process_packets: 8005M (4998 calls, last 4932K)
71921558516: TSC process_packets: 8006M (4999 calls, last 1596K)
71922760220: TSC process_packets: 8007M (5000 calls, last 1006K)
71929853586: TSC process_packets: 8009M (5001 calls, last 1840K)
71931315246: TSC process_packets: 8011M (5002 calls, last 1253K)
72127999920: TSC process_packets: 8016M (5003 calls, last 5606K)
72129568198: TSC process_packets: 8018M (5004 calls, last 1345K)
77161908178: TSC process_packets: 8029M (5005 calls, last 11349K)
77643225736: TSC process_packets: 8029M (5006 calls, last 217K)
89422100594: TSC process_packets: 8035M (5007 calls, last 5656K)
89422123632: TSC process_packets: 8035M (5008 calls, last 1342)
Thread "signal handler" at (0,0) total:36329 recent:3001
Thread "signal_proxy" at (0,0) total:51838 recent:13099
Thread "pdaemon" at (0,0) total:97184 recent:332
Thread "vdrain" at (0,0) total:1266 recent:286
Thread "vrele" at (0,0) total:1904 recent:516
PD "init -> runtime -> nic_drv" -------------------------------
Thread "nic_drv" at (0,0) total:34044 recent:897
Thread "signal handler" at (0,0) total:369 recent:142
...
Subjects that belong to the same PD are grouped together. The formerly
optional affinity and activity options have been removed. Those
information are now unconditionally displayed. The trace entries
belonging to a thread appear as slightly indented.
The patch also updates the coding style, avoiding excessively long
lines.
Issue #4448
This patch reduces repetitive log output by omitting inactive trace
subjects from the log output. The information about all subjects can
still be dumped by setting 'verbose="yes"'.
Issue #4448
This patch splits the creation and updating of monitor objects into two
stages. The creation of a monitor object changes the state of the
associated trace subject. The patch ensures that the new state is
captured by the update of the monitor object.
Issue #4448
This patch makes the trace-subject state as reflected to the trace
monitor more accurate.
Until now, a subject could be in UNTRACED or TRACED state. In reality,
however, there exists an intermediate state after the trace monitor
called 'trace' for the subject but before the subject locally activated
the tracing (done when passing a trace point). This intermediate state
was reflected as UNTRACED. Consequently, threads that never pass a trace
point (e.g., just waiting for I/O) would remain to appear as UNTRACED
even after enabling its tracing by the trace monitor. This is confusing.
This patch replaces the former UNTRACED and TRACED states by three
distinct states:
UNATTACHED prior any call of 'trace'
ATTACHED after a trace monitor called 'trace'
but before the tracing is active
TRACE tracing is active
Fixes#4447
The new macros GENODE_TRACE_TSC and GENODE_TRACE_TSC_NAMED complement
the existing GENODE_LOG_TSC and GENODE_LOG_TSC_NAMED macros to simplify
TSC measurements at a low overhead of the trace mechanism.
The utilities of the new util/formatted_output.h header complement the
existing base/output.h with the text-formatting support needed to
produce tabular output.
Fixes#4449
First, the endpoint update has to comply with the current alternate
settings of all interface, which are stored in USBDevice::altsetting[]
(one value per interface). Second, a SET_INTERFACE control request via
Packet_type::ALT_SETTING must update USBDevice::altsetting for the
interface.
Now, USB devices with multi-setting interface like the Joulescope JS110
with mixed bulk/isochronous endpoints are supported.
This commit adjusts the value such that USB sessions requested by
VirtualBox6 on Sculpt OS can get established on the first try without
invoking the session-retry mechanism. This reduces the number of
diagnostic log messages like:
Error: Insufficient 'ram_quota',got 6296372 need 6297928
The value of 50% as assigned by commit "sculpt: add basic support for
i.MX8 Quad EVK" leaves too little room for other components of the
runtime subsystem. With the adjustements of commit "sculpt: assign CPU
quotas" the sum exeedcs 100%. Hence this commit tunes down the value to
sensible 10%.
The existing assignment of CPU quotas did not anticipate the dynamic
reconfiguration of init. It merely tracked the available CPU quota by
deducing the consumed amount from a global variable but never
replenished the value. This worked for static scenarios but failed in
situations where components are dynamically re-started.
So far this deficiency remained detected because CPU quotas were not
used in highly dynamic systems like Sculpt OS. However, this has
recently changed by commit "sculpt: assign CPU quotas".
The patch improves the accounting by mirroring the existing handling of
RAM and cap quotas. Note that the CPU-quota accounting is still rather
limited. In particular the dynamic rebalancing is not yet supported.
Issue #4445
.SHELLFLAGS is extended by option pipefail to make pipes fail if any pipe
element fails. As .SHELLFLAGS is exported into sub-make instances it
must be unexported before calling third-party build systems recursively.
With the consolidation of the file-system session's signal handlers
implemented by commit "file_system_session: merge ack and submit sigh",
we can now change the VFS server to produce batches of acknowledgements
before explicitly waking up the client. (in contrast to the traditional
'acknowledge_packet', the new 'try_ack_packet' triggers no signal)
Issue #4388
Split the trace buffer into two partitions in order to prevent overwriting
of entries when the consumer is too slow. See file comment in buffer.h.
genodelabs/genode#4434
This commit simplifies the current implementation by overloading the
length field with a padding indicator in addition to the zero-length
head entry. This simplifies the iteration semantics as it eliminates
the need for determining whether a zero-length entries is the actual
head of the buffer or a padding at the buffer end.
genodelabs/genode#4434
To support device-less protocol-stacks only ports, we can use a
Virt I/O Linux kernel flavor, and export the lx_kit/lx_emul parts
not depending on platform API and devices.
Ref #4397
* Drivers have to use lx_kit/memory_dma.cc
* Protocol-stacks use lx_kit/memory_non_dma.cc
* Moreover the device-dependent lx_emul parts get removed
from the common lx_emul import rules
Fix#4443
* Unifies the declaration of callbacks which manage driver/client
shared dataspaces
* Move the Linux driver-specific callback implementation to the
lx_emul library from the PC's USB host driver
Fixgenodelabs/genode#4439
The logic got accidentally reversed during the transition from the
legacy USB driver.
Since the function drops error details, this patch adds a diagnostic
message with the error code as returned by the Linux driver.
This patch declares that the pseudo target virtualbox6/services/ does
not produce any build artifact. This allows the adding of virtualbox6
to Sculpt's 'build:' list.
The run script uses core, ld.lib.so, and init from depot packages, thus
these cannot be integrated in the image explicitly from the build
directory.
Also, removed special build of report_rom, which is not subject of the
test.
Fixes#4437
* The problem occured only on OKL4, seL4, and L4/Fiasco
* The test used to continue submitting packets regardless of how many were in
flight
* This commit limits the in-flight packets at the Uplink/Nic connections to 40
each
Ref #4419
This commit changes the touch-click filter to adhere the following
sequence:
touch (physical)
press (artifically generated)
release (artificially generated)
release_touch (physical)
This order is important because nitpicker's focus handling takes
press/release events into account. If the release-touch event appears
before the release event, nitpicker subsumes the release-touch event
to the sequence that started with the press event, instead of handling
it as a free-standing event.
Issue #4332
By assigning CPU budgets, base-hw's priorities come into effect.
Even though the chosen values are rather guessed than informed, they
yield a visibly improved responsiveness on the Pinephone.
When committing a new entry, the buffer wrapped if the last entry fit
perfectly into the buffer. Otherwise, the length field of the next entry
was set to 0 to mark the new head. Yet, if there was still some padding but not
enough to hold the length field of another entry, we ended up with a
headless buffer.
genodelabs/genode#4430
Since the head of the buffer is marked by a zero-length entry, we must
only write the length field if a new head was set. Otherwise, the
consumer might already read the new entry and not find the new head as a stop
condition.
genodelabs/genode#4430
When a device got already acquired by a platform session client, do not
return the same capability again, even if the same platform session
client requested it. Therefore, make doubtful behaviour of client components
visible, and do not have to struggle with Platform::Device instances
instantiated multiple times, which care of the lifetime of the device
capability internally.
Fixgenodelabs/genode#4379
Genode code already expects MMU to be disabled when starting the
kernel. It is enabled eventually in Bootstrap::Platform::enable_mmu,
after setting up translation tables. Unfortunately nothing ensures
this is actually the case. If MMU happens to be enabled when entering
the kernel things go downhill pretty fast after we start messing with
TTBR.
This patch ensures MMU is disabled for EL1, EL2, EL3 dependent on the
exception level of the CPU core, which is entering the kernel.
This should allow base-hw to start correctly on Quartz64 A board.
The `lookup_translation` function got introduced and is used only in the
context to proof whether a cache maintainance function can be executed
safely by the kernel. Unfortunately, it did not checked write permissions,
which can lead to permission faults. This commit restricts the lookup
function to only succeed when the target page is writeable. Consequently,
the lookup function gets renamed to `lookup_rw_translation`.
Fixgenodelabs/genode#4348
* Switch from the legacy usb_host driver to the new PC version
in recipes and automated tests
* Update documentation snippets
* Remove outdated, unused usb_rndis run-script
Fixgenodelabs/genode#4416
Do not only report devices, but the current configuration of the driver too,
as long as the `report` node in the configuration states it.
Ref genodelabs/genode#4416
To stay consistent with the configuration of the legacy usb_host_drv
and other components as well, do not report USB devices by default,
but when the following XML node is set within the component's
configuration:
<report devices="yes"/>
Ref genodelabs/genode#4416
The new usb_host driver for PC by default needs more RAM quota in contrast
to the old one. To minor warnings and repeated attempts to open a USB
session from a client, this commit increases the default RAM quota by one
page.
Ref genodelabs/genode#4416
Adds a function to the USB part of the Genode's C API, to enable
usb_host drivers to acknowledge USB request in client's packet buffer
although they are not assigned to an USB device. The requests are
marked with a "no device" error.
This commit fixes a regression originally solved in genodelabs/genode#4149
Ref genodelabs/genode#4416
XML allows attribute values like <node attr="\"/>. The XML parser
wrongly reflects this case as 'Invalid_syntax'. This behavior stems from
the implicit use of the 'end_of_quote' function, which considers the
sequence of '\"' as a quoted '"' rather than the end of a quoted string.
The patch solves this problem by making the 'end_of_quote' part of
the tokenizer's scanner policy.
The patch removes the 'end_of_quote' function from 'util/string.h'
because it is not universal, and to avoid the ambiguity with
'SCANNER_POLICY::end_of_quote'.
Fixes#4431
When a PD owns the right to ask for a RAM dataspace's `dma_addr` it is
concurrently constrained to use allocations of a specific physical RAM area.
This commit further limits this area by removing RAM page frame zero.
Otherwise the return value of `dma_addr` for such a dataspace would be
erroneously interpreted as a fault, because zero is currently the error
return value of `dma_addr`.
Fixgenodelabs/genode#4428
This patch cuts the superfluous dependency of abi.so files from the
library dependencies of the corresponding lib.so file. ABIs depend
only on symbol files.
Prior this patch, the second step of the following sequence would
wrongly re-build the abi.so file.
arm_v6$ make init
arm_v6$ make init KERNEL=hw
As the KERNEL argument does not affect the ABI, the abi.so should
better not be created twice.
Issue #4408
The Single_file_system now forwards the
`File_io_service::notify_read_ready` method to the
handle as it already did for most of the other methods.
genodelabs/genode#4394
Do not set '_mode' per default to MANANGED. Check if a manual config ROM
is present during construction and set '_mode' to MANUAL in case it is.
issue #4369
'generate(Xml_node node)', as used by the Sculpt manager, calls this
function instead of the lambda version. The 'report' function of the
'Genode::Reporter' does not throw an exception in case there is not
enough backing storage for the 'generate' request. Therefore, we have to
check this condition in a loop and call '_increase_report_buffer' in
case size limits are reached.
Patch by Norman Feske.
issue #4369
Genode linker does not support .gnu.hash tables so they will never be
used. Tell the linker not to bother producing them. This should reduce
the size of Genode ELF files a tiny bit without loosing anything
important in the process.
Fixes#4423
According to ARM Cortex-A55 Core Technical Reference Manual r1p0 the
lowest 8 bits (Aff0) of MPIDR register represent thread IDs within a
multi-threaded core. The actual core identification bits are in Aff1.
This layout can be identified by checking the MT bit of MPIDR register.
Basically, if MT=1 core id is in Aff1, if MT=0 core id is in Aff0.
Without this change Genode will identify all CPU cores on A55 as primary
(0) core.
Its worth to mention that Cortex-A55 by itself is not a multi-threaded
CPU. Aff0 values are always expected to be 0 for pure A55 cores. A55
cores can however be paired with cores that are multi-threaded. To
support such big.LITTLE CPUs in Genode we'd probably need to add a
different mechanism for mapping MPIDR values to logical, contignous
core IDs which Genode expects.
Ref:
https://developer.arm.com/documentation/100442/0100/register-descriptions/aarch64-system-registers/mpidr-el1--multiprocessor-affinity-register--el1?lang=en
* use netperf omnitest output selectors to acquire more metrics
* remove packet_size argument that was not interpreted by netperf
genodelabs/genode#4427
