The PDF viewer can crash under a number of conditions due to changes to
the internal framebuffer model that were made to support mouse wheel
panning. These changes are reverted until the model can be reimplemented
to explicitly support page panning.
Fix#3021
This patch improves the detection of new appearing top-most windows.
Such a window should prompt the decorator to bring the corresponding
nitpicker view(s) to the front of the view stack. The original
implementation relied on hints provided by the layouter (the 'topped'
attribute). With the patch, the decorator tracks the top-most window by
itself, which improves the robustness.
As a second improvement, the patch defers the destruction of windows to
the point when all other window operations are completed. This hides
intermediate states when replacing one window by another in one step,
which is typical for console-like scenarios. Hence, this patch should
eliminate flickering artifacts when switching from one virtual console
to another.
Issue #3031
This commit replaces the former floating_window_layouter with a new
window_layouter component that supports the subdivision of screen space
into columns and rows, the concept of layers, and the principle ability
to store window layout information across reboots. The latter is
accomplished by reflecting the component's internal state as a 'rules'
report to the outside.
Fixes#3031
* In base-foc/recipes/src/ replace base-foc with base-foc-pc
* To base-foc/recipes/src add base-foc-arndale, base-foc-pbxa9
* Ensure that the correct base-foc recipe is choosen by the run module
'boot_dir/foc'
* To base-hw/recipes/src add base-hw-arndale, base-hw-imx53_qsb,
base-hw-imx53_qsb_tz, base-hw-odroid_xu, base-hw-panda, base-hw-rpi,
base-hw-wand_quad
* Ensure that the correct base-hw recipe is choosen by the run module
'boot_dir/hw'
This patch fixes the following build problem that occurs on recent
GNU/Linux systems:
/usr/include/x86_64-linux-gnu/sys/cdefs.h:307:0: error: "__always_inline" redefined
...
/usr/include/linux/stddef.h:5:0: note: this is the location of the previous definition
The code in 'cdefs.h' does not check if the '__always_inline' is already
defined. The patch works around the problem by including the 'sys/cdefs.h'
first.
For being able to build the tests via source archives, the 'base'
library must be denoted as dependency explicitely in their 'target.mk' file.
This is because when building archives, the API dependencies of used APIs are
not taken into account.
Use the Timer session duration for CLOCK_MONOTONIC and CLOCK_UPTIME.
Use the Genode::Duration object for passing internal time, it supports
sub-millisecond time and helps disambiguate units of time.
Fix#3018
Block and loop until application writes are sent or buffered in their
entirety. Do not call "tcp_output" directly, LwIP calls this procedure
internally and calling it again appears to disrupt the LwIP TCP state
machine.
Fix#3017
Move button-event reporting behind pointer-position update.
This is just a quickfix to restore correct pointer emulation with
dde_linux usb_drv. It does not change usb_hid_drv because the approach
is a questionable workaround of the current input event handling, which
reports events promptly on occurrence of inputs events and ignores
synchronization events completely. The original contrib code reported
the button press before absolute x and y positioning followed by a sync
event.
Issue #3019
This component allows access to Terminal sessions via interactive SSH
sessions. Please read _repos/gems/src/server/ssh_terminal/README_ for
more detailed information.
Fixes#3014.
This fixes the region-map component implementation in core, which uses a
'Genode::Weak_ptr<Genode::Region_map_component> _faulting_region_map'
member. This member is assigned a valid weak_ptr or an invalid weak_ptr
according to the state machine.
Fixes#3012
The new 'conditional' method simplifies the typical use case for
'Constructible' objects where the constructed/destructed state depends
on a configuration parameter. The method alleviates the need to
re-implement the logic again and again.
The patch also removes the 'Reconstructible' constructor arguments
because they are unused.
Fixes#3006
* Account all RAM/CAP quota of a session except quota for metadata used in
core. The latter is considered when asking if a session can afford to make
an operation but it does not get accounted to always be able to pay back all
quota when a session closes. The general accounting mechanism is moved from
atop of the allocators down to the level of RAM/RM session operations.
* report statistics about session objects and quota if <report stats="yes"
quota="yes"/> is configured. (default is yes if <report> is present)
Issue #2953
Like suggested by RFC 2663, reprogram the dissolve timeout of a TCP link
state to 2 times the maximum segment lifetime (by default 1 minute) when
receiving a matching packet with the FIN flag set, or with the ACK flag
set to acknowledge a FIN of the remote side.
Mark a link state as closed (no further reprogramming of the dissolve
timeout) and set the dissolve timeout to 2 times the maximum segment
lifetime when receiving a packet with the RESET flag set.
Issue #2953
If the NIC router has insufficient CAP or RAM quota for the creation of
a state object for an interface, it tries to destroy a certain amount of
existing state objects of this interface to free resources. Afterwards,
it retries handling the current packet once. If it does fail again, the
router drops the packet.
Issue #2953
Ensure that a '\0' always appears at the end of the ouput of the XML
generator. Previously, exceptions during the Node(...) constructor
might have prevented this. This commit also extends the xml_generator
test to drive a harder test on exceptions in the Xml_generator.
Issue #2953
When the functor provided to the Node constructor throws an exception,
do revert all changes in reverse order. Previously, the changes made
to the parent node were not considered by the exception handler which
caused unnecessary characters to remain in the out buffer for each
reverted node.
Issue #2953
Switch to kernel branch, that determines the available system memory during
boot time. The overall kernel memory is still static, but during boot time
dynamically the amount can be chosen. Following 3 config option exists:
CONFIG_MEMORY_BOOT is the amount of kernel memory allocated in the BSS
statically - effectively chosen during link time - see linker script.
CONFIG_MEMORY_DYN_MIN && CONFIG_MEMORY_DYN_PER_MILL configures the dynamic
part of the kernel memory allocation applied during early kernel boot time.
CONFIG_MEMORY_DYN_MIN is the amount of memory which should be allocated at
least. CONFIG_MEMORY_DYN_PER_MILL defines the amount of the system memory in
per mill which should be allocated at most. The overall maximum kernel memory
is restricted to ~1G (64bit), due to the chosen internal virtual memory layout.
Fixes#2985
On some machines, both the AHCI and NVMe drivers are started within the
[drivers -> dynamic] subsystem. This ultimately exhausted the RAM quota
of this subsystem.
Issue #2987
This patch introduces the distinction of the manually managed
config/deploy from the managed config/managed/deploy. The latter
incorporates interactive changes of the system by the user. There are
two user interactions supported.
First, by clicking on the '+' button at the top-left of the runtime
view, the user can select a component to launch. All launchers at
config/launcher/ are listed in the popup menu. Each launcher can be
lauched only once. While running, is not available in the popup
menu.
Second, when selecting a node that corresponds to a start node in
config/deploy or that was interactively launched, the detailed view
shows a 'remove' button, which can be used to exclude the component
from the deployment.
The result of the interactive manipulation is always available at
config/managed/deploy. Hence, the current situation can be made
persistent by using it as config/deploy.
Fixes#2986
The tasklet_schedule implementation was missing the unblock call, which
was no problem in the past because the correspending task would get un-
blocked by other work items. Now that every workqueue has its own task,
there is nobody left to unblock the task and thereby execute the
tasklet. As a tasklet is the only way to transmit any pending frames
after transmission was temporarily suspended - because the device/fw
was not able to process the TX request - this rendered 6xxx devices
unusable whenever this situation occurred.
Fixes#2973.
The Arora main thread sometimes blocks on a pthread condition variable,
which prevents Genode signal processing with the current implementation.
This is especially a problem when the thread who could unblock the main
thread calls 'Libc::suspend()'.
As a workaround until the pthread locking mechanisms get adapted to the
Genode libc execution model, the Arora main function can be called from
a dedicated thread.
Fixes#2978
Close the stdin, stdout, and stderr I/O channels at child exit. This
serves to flush buffers at the I/O resources which might not be written
otherwise.
Ref #2919
The VFS LwIP plugin is page-faulting on connect error because the LwIP
library frees a failed TCP protocol control block before calling the
error callback, and then the VFS plugin dereferences the PCB to free it
a second time. This problem was caused by a failure to follow
documentation during a transition from a C callback to a C++ method.
Fix#2972
1) The loop for determining the line length read from a character offset
before checking whether the offset is smaller than the given string
length. This could have caused access outside the string buffer.
2) The routine for determining the line length first seeked for the
offset of the last real character of the line and than added one for
getting the length but only if the following character was '\n'. This
has to be done for any other line-terminating character too. The only
case where you don't want to do this is when the end of the whole
string is reached.
Issue #2967
When 'notify_read_ready()' is called during 'select()' and fails,
suspending can cause a deadlock when the libc IO response handler becomes
active and calls 'select_notify()', which tries to acquire the
'select callback list lock', which is already acquired by the suspended
'select()' call.
It seems possible to ignore a failed 'notify_read_ready()' call instead of
suspending. When the VFS plugin calls the IO handler later when the
notification request can be processed, the 'select_notify()' call of the
libc IO response handler will eventually call 'notify_read_ready()' again.
Fixes#2970
Implement the passwd database subroutines with single-user database.
This database is populated with a <passwd/> sub-node of the libc
configuration node. All fields of the "passwd" struct may be specified
with reasonable defaults provided for a "root" user. This allows a
libc-based component to spoof user information for the sake of porting
existing Unix software.
A test is provided at run/libc_getpwent.
Fix#2919
GNU tar interprets the passed time value in local time by default, which
lead to unstable hashes again. So, now provide a complete date/time
value incl. time zone.
Related to #2842
The VFS server does not support file-system with one single-file plugin
providing the root. This is because the "leaf_path" is not universally
implemented to handle the path "/". This fix is simply to skip a
"leaf_path" check when opening the path "/".
Ref #2919
Rather than removing the source files during the port preration, which
breaks preparing the port anew, they are now removed while creating
the src archive.
Fixes#2959.
This patch unifies the handling of on-demand resource upgrades among
ram_fs and depot_rom, and applies the new pattern to the runtime view.
This way, runtime view becomes able to accommodate more complex
scenarios.
There is a bug in the LwIP VFS plugin, the chained buffers used by Lwip
use sizes expressed in sixteen bits, and under conditions such as a read
of 1<<16 the higher bits are lost and the plugin performs a zero length
read, and the application interprets this as a closed connection.
Fix#2947
Since we use the git repo by now remove all unnecessary ballast like
unused code and the git history. The will bring down the wifi_drv's
src archive to reasonable size again.
This patch enables the user to click on a component in the runtime view
to reveal more information such as the used/assigned RAM/caps and
secondary dependencies.
This patch adds a graph of the current runtime state to the
leitzentrale. The topology of the graph depends on the first routing
rule of each component. For this reason, the patch re-orders routing
policies to make the most important route the first in the list.
The user can switch between the runtime view and the inspect window
by clicking on the corresponding menu dialogs. E.g., a click on the
storage dialog reveals the inspect window.
The PS/2 driver retries to get mouse-reset results for 700 ms, sleeping
after each attempt for 10 ms. So, the driver needs a Timer session now.
Fixes#2713
The most important route of each launcher is at the top of routes and
will be used to layout the graph topology of the runtime view.
By caching the state reports generated by the runtime init, the sculpt
manager becomes able to quickly check for the presence of components. So
we can apply routing-dependency checks not only prior starting
components but also while components are running.
Fixes#2938Fixes#2912
This patch fixes a problem in the non-const 'for_each' method of the
'Registry' data structure. If an exception was thrown from within the
functor of the 'for_each' operation, the not yet processed items of the
registry were dropped from the registry, which is not expected.
This patch addresses two problems: By guarding the buffer allocation in
a nested class, an exception in the body of the 'File_content'
constructor reverts the allocation. Second, if the file has no content
no allocation should be performed. The previous version wrongly passed
a size of zero to the allocator in this case.
This patch addresses a situation where _process_packets was called as a
side effect of watch notification (that was processed during an unlink
RPC operation). This scenario (triggered by the fs_query test)
ultimately ended up in a deadlock. Io/watch reponse handlers should
never re-enter the application logic.
The new base/xsd/config.inc defines generic XSD types such as 'Boolean' or
'Session_label'. It can be included in config XSD files by using:
! <xs:include schemaLocation="file://${GENODE_CONFIG_INC}"/>
The string ${GENODE_CONFIG_INC} is replaced by the run tool with the
above mentionened file path.
Issue #2897
Seen on X250
Description from https://www.win.tue.nl/~aeb/linux/kbd/scancodes-1.html
The ten grey keys Insert, Home, PgUp, Delete, End, PgDn, Up, Left,
Down, Right are supposed to function regardless of the state of Shift
and NumLock keys. But for an old AT keyboard the keypad keys would
produce digits when Numlock was on or Shift was down. Therefore, in
order to fool old programs, fake scancodes are sent: when LShift is
down, and Insert is pressed, e0 aa e0 52 is sent; upon release of
Insert e0 d2 e0 2a is sent. In other words, a fake LShift-up and fake
LShift-down are inserted.
Fixes#2888
The 'Report' route was missing. The commit also removes superfluous
routing rules for IO_PORT, IRQ, and IO_MEM that are captured by the
subsequenting wildcard anyway.
Issue #2909
The COW plugin provided only partial copy-on-write semantics and had
problems detecting recursive requests. Conversely, the import plugin has
much simpler behavior that is easy to test because it mirrors that of
the ram_fs server.
Ref #2745
LwIP skips a packet copy by wrapping Nic stream buffer regions in LwIP
pbuf objects. Move from a fixed size array to a potentially unbounded
slab allocator for managing this buffer metadata.
Ref #2335
A 'QThread' can be reused when its execution is finished by calling
'QThread::start()' again. Before this commit, this created a new Genode
thread, but did not destroy a previously finished Genode thread first.
Fixes#2928
Add additional parsing modes to the sequence decoder to detect and
discard unhandled sequences for ECMA-48, DEC private, and Xterm.
Add new behavior for cursor movement, cursor hiding, character deletion,
and line-wrapping.
Fix#2923
The libc sockets implementation already syncs socket control files after
writes, so sync errors will induce failures for operations such as
"connect".
Fix#2920
This patch reintroduces the LwIP stack to libc as a VFS plugin
implementing the socket_fs interface. Rather than use LwIP's socket
emulation layer this plugin interfaces directly to LwIP raw API and is
single threaded.
The internal TCP parameters of the stack are untuned.
Fix#2050Fix#2335
A timer should set itslef not pending before calling the timout handler.
This is important for timeout handler that program the timeout again.
issue #2910
When the cached_fs_rom saturates the packet stream of its File_system
session it will call the session request handler recursively as pending
transfers are completed. This is bad because the content of the XML node
currently being processed will change.
The session request handler can no longer be called directly, but the
"schedule" method will submit a signal to the request handler, and
requests will be processed after the current operation has completed.
By adding a sanity check for the validity of the PD session targeted by
a transfer_quota operation, the corner case of an incomplete PD session
of a child can no longer trigger an 'Invalid_session' exception.
Calling 'handle_io_response()' in a regular VFS function (in contrast to a
post-signal hook) can cause problems if the caller of the VFS function holds
a lock which prevents the io response handler from returning.
With this commit, the user of the VFS becomes responsible for unblocking
threads which might be blocking after a failed 'queue_read()', 'queue_sync()'
or 'write()' call.
Fixes#2896
This new vfs_import plugin allows a VFS instance to be populated during
construction using a sub-VFS configured in an '<import>' configuration
node. This allows the ram_fs File_system server to be replaced by the
VFS server by reimplementing the ram_fs 'content' feature. At the
moment the copying of symlinks is not enabled, and the resources
obtained by the import file-system may not be freed after the import is
finished.
Fix#2906
The ram plugin to the VFS must send notifications to watch handles on
files when they are removed. This brings the VFS server to parity with
the ram_fs server for the sake of notifications.
Move run/fs_report to gems and use the vfs server and the vfs init
plugin in the test.
Ref #2902
This patch removes the detection of statically linked executables from
the base framework. It thereby fixes the corner cases encountered with
Sculpt when obtaining the binaries of the runtime from the depot_rom
service that is hosted within the runtime.
Statically linked binaries and hybrid Linux/Genode (lx_hybrid) binaries
can still be started by relabeling the ROM-session route of "ld.lib.so"
to the binary name, pretending that the binary is the dynamic linker.
This can be achieved via init's label rewriting mechanism:
<route>
<service name="ROM" unscoped_label="ld.lib.so">
<parent label="test-platform"/> </service>
</route>
However, as this is quite cryptic and would need to be applied for all
lx_hybrid components, the patch adds a shortcut to init's configuration.
One can simply add the 'ld="no"' attribute to the <start> node of the
corresponding component:
<start name="test-platform" ld="no"/>
Fixes#2866
When mounting a ROM module with binary="no", the
vfs will detect the 0-termination to calculate the
file size instead of using the dataspace size.
Fixes#2903
Process I/O packets in batches. If a batch is processed and there are
still packets pending, send a signal locally to the packet handler and
return to the entrypoint signal dispatcher. This prevents clients from
starving each other, which happens when a client continuously submits
packets at a faster rate than the server can process.
Fix#2900
Test of File_system I/O scheduling. It appears that a client not
submitting I/O packets slower than the VFS server can process will
starve other clients.
Ref #2900
This patch adds the /config/usb file to Sculpt, which allows then user
to manually define rules for assigning USB devices to clients. The
content is incorporated by the driver manager into the USB driver
configuration. Note that this mechanism does not work for HID devices
because these devices are claimed by the USB driver's built-in HID
support.
Issue #2890
Previously, the trace control of a thread was initialized in its
constructor (which is generic for all components). This has the
disadvantage that the CPU-session-pointer member of the thread might not
be valid at this point. And it cannot be replaced by using the
"deprecated_env" CPU session neither as constructing the deprecated
environment in causes troubles in Core. But as the trace control
shouldn't be needed in Core anyway, the initialization can be moved to
the Thread::start implementation of non-core components. This code
already takes care of the CPU session pointer.
Fixes#2901
This component is contrasted with the fs_rom server that serves
independent dataspaces to each client. Using a cache was not possible
until the region map session supported the creation of read-only
attachments.
Test at run/read_only_rom.
Ref #1633Fix#2760
The verbosity mode of the NIC bridge can be toggled with the verbose attribute
(default value shown):
! <config verbose="no" />
If enabled, the NIC bridge logs sent and received packets as well as the
lifetime of interfaces connected to the bridge.
Issue #2899
This commit contains a patch of bash's built-in default escape sequences
to match the 'screen' terminal as used by Genode's terminal component.
Fixes#2705
The test triggers the following assertion in the kernel, which will
remain unfixed as the kernel is no longer developed:
Assertion queue_state.is_set(queue_state_t::send) failed in file
.../pistachio/kernel/src/api/v4/tcb.h, line 727
This assertion is presumably similar / related to issue #1495.
Do not generate invalid configurations for the uplink domain anymore. If
some tests are disabled and therefore their routing rules at the uplink
domain would be invalid, spare out these routing rules.
Issue #2899
This patch addresses a corner case revealed by the resource_request test
on seL4 after changing the child-destruction handling with commit "base:
close PD on 'close_all_sessions'". During the destruction of the PD
session, the backing store (session-local RAM dataspace factory) of the
signal broker's slab was destroyed before destructing the signal broker.
Instantiating the signal broker after the RAM dataspace factory fixes
the destruction order.
Quietly insert forward declaration of a Input::Binding class, and make
it a friend of Input::Event and Input::Session_client. This is to allow
non-C++ language bindings (Nim) to access private members by providing
their own implementation of the Binding class.
Fix#2889
The legacy PIT timer driver is too jittery for the character-repeat
test. This patch disables the test for platforms using this device as
user-level time source, which are at the moment OKL4, Pistachio, and
seL4.
This patch makes the run script compatible with the disk-image backend
of the run tool. Since this backend attaches the boot image as AHCI
disk 0, we have to supply our custom disk image as AHCI 1.
The native CPU client holds a capability reference and the reference
counter of the capability can reach its limit when many threads are
successively created and destroyed (destroyed by the Linux kernel).
Fixes#2886
When first selecting an access point to connect to, and then - while the
passphrase entry field is displayed - switching to wired networking, the
keyboard focus was still referring to the passphrase entry field instead
of yieling the focus to the inspect window. This commit fixes the
problem by adding the wifi NIC target as additional condition.
This patch improves the handling of the corner case where a client
vanishes while a session request is in flight (CREATE_REQUESTED but
not yet AVAILABLE). This corner case could be sporadically observed with
the init_loop test on base-linux.
In the original version, the session would eventually be delivered but
never picked up by anyone. Such a stale session still uses resources that
should better be released. In the new version, the parent checks for the
liveliness of the client whenever a session is delivered. If there is no
client of the session, a close request is immediately issued to the
server. The session state must be preserved until the close requests has
been answered.
This patch moves the closing of a child's PD session from the 'Child'
destructor to the 'close_all_sessions' method. This way, the child's
PD quota is immediately returned as soon as init flags a child as
'abandoned', which removes jitter from init's RAM-state reports.
The patch is supposed to make the 'init_loop.run' test much happier.
This commit is a follow-up to "nit_fb: allow screen-relative
initial_width/height". With it, the nit_fb window created via the
launchpad can be interactively resized.
Also remove 'requires_installation_of', while also checking sbin
directories in 'have_installed'. The run scripts have been adjusted
accordingly.
Fixes#2853
The 200-second timeout of the init test triggers on some test platform
(in particular on qemu) while it is overly pessimistic on others.
This patch aims at stabilizing the timing behavior of the test across
the tested kernels/machines.
This is a follow-up patch of "init: avoid too eager child restart". On
each config update of init, init re-applies child-specific configuration
changes. In the case of an already exited child, this re-evaluation
wrongly marked such a child as abandoned because the child's environment
sessions do no longer exist. Abandoning the child, in turn, triggers the
destruction and subseqent restart (because the <start> node of the
configuration still exists). The latter is bad for two reasons.
First, the exit state of the original instance becomes lost. Second, the
restart may have unexpected side effects due to sessions created by the
new instance. I.e., when resizing a partition in sculpt, init would
wrongly restart the gpt-write tool after the tool successfully exited.
This collides with a newly started instance of part_blk/resize2fs, which
now competes with the second gpt-write instance for the exclusive access
of the targeted block device.
The patch prevents init from re-applying configurations to exited
children. The accompanied test case covers the corner case.
Do not simply wait for the good ping test to finish, but for the other
flood tests to trigger the RAM exhaustion. This makes the test more
robust with slower platforms or a different timing.
Issue #2857
The log messages covered by verbose_packet_drop were previously
configured by the verbose attribute. This isn't the case anymore. Now,
you can configure them as follows:
! <config verbose_packet_drop="no" ... >
! <domain verbose_packet_drop="no" ... />
! <config/>
The new attribute determines whether to log each packet drop and the
rational behind it. The <config> value affects all domains without a
<domain> local value.
Issue #2857
The default value of each <domain> is the <config> value. However, if
a <domain> local value is set, the <config> value doesn't affect this
value at all.
Fixes#2874
The ICMP-Echo-server functionality of the router has the following
configuration attributes (default values shown):
! <config icmp_echo_server="yes">
! <domain icmp_echo_server="yes" ... />
! </config>
The icmp_echo_server attribute configures whether the router answers ICMP Echo
requests that address the router. The <config> value affects all domains
without a <domain> local value.
Issue #2874
This patch ensures that session-create requests are handled after close
requests, which solves the corner case where one single-session server
receives a close and create request at the same time. E.g., when
expanding a partition with Sculpt, the gpt-write tool is removed and
part_blk is started (to execute resize2fs on top) in one step. Both
interact with the USB-block driver, which is a single-session server.
Fixes#2877
- Reordering and cleanup of commits to form a common branch shared by others
- Add right bit to deny portal usage for cross-core IPC
- avoid GP when switching on AMD SVM if disabled by UEFI/BIOS
Issue #2854
When a domain is updated to a new component config, the two criteria for
keeping an ARP waiting state of a remote domain are whether the remote
domain still exists and whether its IP config is still the same. This
means that a domain must also dissolve all of its remote ARP waiting
states if its IP config changes (without an update of the component
config). This wasn't the case until now.
Issue #2840
The top-level Sculpt configuration is routing ROM requests for chargen
files from the input_filter to the parent, and this prevents new chargen
files to specified, for instance the German or Workman layout. Route ROM
requests with a combination of label_prefix and label_suffix patterns to
the config_fs_rom component, allowing the input_filter to be dynamically
reconfigurable.
Fix#2872
It can happen that a keyboard gets plugged in and 'led_connect()' is
called while the keyboard LED of another keyboard is just being updated
(and the registry is locked).
Fixes#2869
- initialize the stack size attribute with `Libc::Component::stack_size()`
as default value
- remove the possibly uninitialized `pthread` member from the attribute
structure and obtain current attribute values in the
`pthread_attr_get_np()` function, where the `pthread` object reference
is given as argument
- let each thread obtain its stack address and actual stack size at thread
start to have the information available for other threads
Fixes#2865
The apu2c4 boards have 3 i210 PCI devices (one for each LAN port). Other
apu2 boards use i211 device IDs according to https://www.pcengines.ch/apu2.htm
but could not be tested.
This commit also incorporates an upstream MAC address handling fix.
The libc will now use the file given by the 'nameserver_file' attribute
to get the DNS nameserver address instead of reading '/etc/resolv.conf'.
It defaults to '/socket/nameserver' which is the common location when
using the lxip VFS plugin. As a constraint the libc will read the first
line and expects the nameserver address without any keywords in front of
it.
Fixes#2861.
Merge the configuration from raw/pdf_view into the pkg/pdf_view runtime
file. Request a File_system session and load files from there, rather
than by ROM.
Ref #2859
The component is no longer loads from '/test.pdf', the first PDF file
found in the root directory of the file-system is loaded automatically.
The behavior cannot be overridden by configuration.
Feed MuPDF with characters from input events to MuPDF rather than
translate raw key codes to ASCII. This enables almost all MuPDF key
bindings without the need to maintain a lookup table. Mouse navigation
has been enabled as well. To print the key-bindings to log, press '?'.
Fix#2859
The chroot server was conceived to automatically place File_system
sessions into segregated root directories by converting session labels
to paths. If multiple children needed to be grouped under the same path,
a 'merge' policy would truncate the session label before path conversion.
Now that init can rewrite session labels and thus reproduce truncation,
the chroot merge feature is redundant and can be removed.
Fix#2846
Removed the modified mark from handles that have been written to when
they are synced, otherwise a notification would be sent again when the
handle is closed.
Ref #2839
* Do not log events that are not critical (deadly) to the NIC router if not
configured to be verbose,
* Print almost all log lines with a prefix of the domain name they are
related to,
* And, do not use Genode::error and Genode::warning as they make it hard to
read the log with the domain name prefixes.
Fixes#2840
Introduce the uplink tag:
! <config>
! <uplink label="wifi" domain="uplink">
! <uplink label="wired" domain="wired_bridge">
! <uplink domain="wired_bridge">
! <config/>
For each uplink tag, the NIC router requests a NIC session with the
corresponding label or an empty label if there is no label attribute.
These NIC sessions get attached to the domain that is set in their
uplink tag as soon as the domain appears. This means their lifetime is
not bound to the domain. Uplink NIC sessions can be safely moved from
one domain to another without being closed by reconfiguring the
corresponding domain attribute.
Attention: This may render previously valid NIC router configurations
useless. A domain named "uplink" doesn't automatically request a NIC
session anymore. To fix these configurations, just add
! <uplink domain="uplink"/>
or
! <uplink label="[LABEL]" domain="uplink"/>
as direct subtag of the <config> tag.
Issue #2840
The term was used for the old configuration during the handling of a new
configuration but in other places it was already called old_config.
Issue #2840
Dissolve and destroy the invalid domain first before deinitializing all
domains for the next round. This way, the deinitialization is not done twice
for the invalid domain.
Issue #2840
Due to a bug in the deinitialization of the DHCP server of a domain (the
reference to the destroyed object was not cleared), the NIC router could
end up in a page fault caused by a double-free at the heap. This also fixes
the previously missing dissolving of the "DNS-server-from" relation to a
remote domain.
Issue #2840
Internally, Genode::Session_label has a typedef from String<capacity()> to
String. To have this typedef public is especially useful when reading a
label from an XML node. This can then be written as
! Session_label label = node.attribute_value("label", Session_label::String());
instead of
! Session_label label = node.attribute_value("label", String<160>());
which would be less generic (Session_label cannot be used directly as there
is no appropriate ascii_to implementation).
Issue #2840
Currently has three clients that continuously create new UDP/TCP/ICMP
connections through the NIC router with NAT to the outer world and they
get never closed. A fourth client does normal ping through the same
domain to the outer world that must succeed even after the RAM quota of
the other session at the router is exhausted. The test is restricted to
Qemu to not being at risk to flood real networks.
Issue #2857
Currently, if the target of a reply capability gets destroyed, the
ipc syscall reply/wait returns with an error. Although we detect
the error condition we continue with reply/wait, which leads to
an endless loop. This commit introduces a condition analoque to
the base-library for pistachio and fiasco to do an open wait if an
error occured during a reply.
This patch weakens the aggressive restart of a child with incomplete
environment sessions. The restart check is performed each time
the init configuration changes. In sculpt, this is not a rare special
case anymore but a frequent case when using the depot_rom as provider
for environment ROM sessions. In particular when starting a chain of
inter-depending children, the sculpt-manager quickly generates a
sequence of configurations with successively added start nodes.
The addition of the 'Cap_consumer' feature to app/dummy increased the
static RAM demand of the component to a point where 1 MiB no longer
suffices on sel4 (on this kernel, the base library uses a larger amount
of statically allocated data compared to the others). The tweaks enable
init.run and init_loop.run to work on sel4 on x86-64.
Selecting an alternate interface setting, even if it is the same as the
current one, apparently makes the INQUIRY command fail with USB devices
like 'SanDisk Ultra Fit' (0781:5583) and 'Corsair Flash Voyager'
(1b1c:1a03) when the USB block driver is restarted.
Fixes#2860
* Catch Quota_guard exceptions wherever we do 'new (_alloc)' in Interface
and in case drop the packet that caused the exception
* Modify Interface::handle_config_2 to not use the guarded allocator of the
NIC session quota as we cannot handle a RAM exhaustion well at this point
in time. Instead use a Constructible member in Interface so that a needed
RAM adds up to the calculation in the create_session implementation where
an exhaustion is handled via a service denial.
Issue #2857
The interface destructor called pure virtual methods at least when
cancelling ARP- waiting states. The implementations were made by the
deriving classes Session_component respectively Uplink. This led to an
abort of the NIC router as the destruction of the derived class was
already done. A similar problem already occured in the past during the
construction of Interface and was back then solved by introducing a
separate init() method. This commit, however, solved the problem by
making Interface a member of the other classes. Therefore, the init()
method could be removed again. Furthermore, the interface polica could be
moved from Session_component_base to Session_component. The commit also
had to generalize the way the link state of an interface is determined.
Fixes#2856
With this patch, the sculpt manager takes over the role the window
layouter of the leitzentrale, which eliminates the need to manually
position and size the inspect window.
While a child is abandoned, we must limit the start of anothers with
the same name. Otherwise - of the child has startup problems - a number
of abandoned children with the same name may queue up. This becomes a
problem whenever the child destruction depends on an asynchronous
service that provides an env session for the children. If the service is
unable to keep up with the session requests (both create and close),
the queue of abandoned children becomes unbounded. Limiting the child
creation rate to one abandoned child per name mitigates this problem.
This patch reduces the latency of state reports when children are
removed or added, thereby, accellerating the feedback loop between a
management component and init during the staged startup or removal of
inter-dependent components.
Whenever an environment session was provided by an asynchronous service,
e.g., the depot_rom of the sculpt scenario, the session quota was not
transferred to the server at session-creation time. This resulted in a
slow depletion of the server's quota over time. This patch ensures that
the delivery of session quota is consistent with the information
reported to the server as session argument.
The 'Child::_revert_quota_and_destroy' assumes to be called from the
client's context, which is normally the case when destroying sessions.
However, if a client's session outlives the client (because the
asynchronous close request to the server is still pending), the session
cleanup is performed in the context of the server. Here, the
'session_response' implementation wrongly called
'_revert_quota_and_destroy' to the effect that the session quota was
withdrawn from the server (good) but subsequently transferred back to
the server (bad). The patch replaces the call of
'_revert_quota_and_destroy' with only the first - correct - part of the
transaction.
This test monitors the RAM quota of a dynamic init and a server hosted
within the dynamic init in the presence of a repeatedly created and
destructed client.
Previously we were doing the initialization once over all domains,
remembered which of them became invalid and destroyed those afterwards.
This isn't sufficient. As soon as one domain becomes invalid we have to
dissolve/destroy this one, deinitialize all other domains again (as they
could contain references to the invalid domain) and retry to initialize
them from the beginning. We proceed with this until we have one run
without a domain becoming invalid. Then we can be sure that the last
initialization run did not create references to any invalid domain.
Issue #2840
The generic helper Avl_string_tree of the NIC router is currently only
used for finding domains via their names, but in the future it can be
used for finding uplinks by their labels also. Additionally, it enables
us to throw an exception when inserting two elements with the same
identifier.
Issue #2840
This patch suppresses the start of components that cannot run because
obvious runtime dependencies (used servers) are missing in the runtime.
In this situation, the sculpt manager gives diagnostic feedback to the
user in the runtime dialog.
* Get rid of the base classes Rule and Leaf_rule,
* Make log output about initiated or invalid routing rules conform to the rest
of the router log, and
* Ensure that each type of routing rule when being invalid invalidates its
whole domain.
Issue #2840
On Linux, we have a tap device as NIC back end but there is no one to
ping to in the subnet of the tap device. On FOC, the tests seem to trigger
a bug in the destruction of components with parent.exit(X); .
Fixes#2848
Sculpt's discovery of the default storage target can be intercepted by
user input (i.e., pointer movements) at boot time. The patch makes this
intervention mechanism robust for the case where nitpicker's first hover
report arrives after all storage devices were already scanned.
By tracking the states for an interactive selected NIC target (managed)
and a manual-defined NIC target (config/nic_router) separately, the
sculpt manager becames able to present the user with the ability to
interactively disable and re-enable a manually-managed network
configuration.
The sculpt manager wrongly paid for the nitpicker session of the fader
out of its own pocket. This patch reduces the quota transfer to the
amount provided the fader.
When updating the GPT to match the underlying block device, the
protective MBR will normally also be updated. In case a hybrid MBR is
used, as is done if 'image/disk' is specified, setting the
'preserve_hybrid' flag will prevent the component from overriding the
MBR.
The condition was too rigid. In the case where no motion occurred in
between the press and release events of the magic button, the delayed
press event would not be delivered. This - in turn - confused other
components (like nitpicker) down the input chain.
for such classes where it should be safe and where we have seen issues.
Disabling in general bus master DMA causes on some machines hard hangs, e.g.
because the USB handover protocol was violated.
Fixes#2835
In contrast to most information of init's state reports, which can be
monitored at a relatively low rate (like 2 seconds in Sculpt's runtime),
resource requests call for an immediate response by the consumer of the
report. Otherwise the requesting child stays unnecessarily blocked until
the next rate-limited state report is due. This patch adds a fast lane
for such low-latency state updates to init.
- support saving of files with no file name extension
- make the the "All Files (*)" file selection filter the default to see
configuration files immediately
Fixes#2844
This commit updates Early-Adopters (EA) version of Sculpt to the version
for The Curious (TC). Most importantly, it contains the new interactive
sculpt-manager component that automates many system management and
configuration tasks.
In case of an Alloc_return error, don't free the address at 0. If this
is a managed dataspace, there could be valid attachments which then gets
lost.
Make decreasing alignment search working. Continue with lower alignment
restrictions in case the optimal alignment wish can't be fulfilled.
Do not send nor buffer packets at interfaces with link state "down". This
prevents that packets that were routed to one network (allowed to see them),
due to a sudden link down/up, are leaked to another network that is not
allowed to see them.
When updating an interface in the NIC router to a new configuration and
the domain name of the interface has not changed but the domain
disappeared, the NIC router did not detach from the old domain correctly
which led to broken remnants of interface state objects (like connection
states).
Adapt the nic_router_uplinks run script to work with the fix.
fs_report truncated the report file on construction of the report
session to mimic an "empty report". This prevented existing use cases
where the initial state was already written to the file system by other
means.
I doubt that use cases exist where the inital empty-report mimic is
needed and (if I'm wrong) there is still the race of the consumer
reading the file just before the report session is constructed.
Reporters that want to enforce an empty initial report should send it
explicitly.
This patch enhances the 'Child' interface with the ability to retry the
deployment after an initial attempt failed. This way, packages can be
installed on demand based on the error feedback of deployment attempts.
The state report reflects the progress of downloading, verifying, and
extracting archives. For the download step, it includes the progress
as reported by fetchurl.
This patch changes the button widget to apply the vertical offset to its
child widgets at draw time, not at the layout phase. This way, the
visual feedback on button press/release changes is more direct because
it sidesteps the geometry animation.
Clients may wish to act on missing files. In any case the fs_rom
needs to reopen a watch handle when a file is deleted, and this
sort of change to the internal state machine is propelled by
client RPC requests.
Fix#2839
The new 'displays' report contains information about the used
framebuffer backend. It is issued when nitpicker has successfully passed
all initialization, in particular the connection to the framebuffer
driver. Hence, it can be taken as an indicator of whether the framebuffer
is available or not (e.g., caused by a faulty driver).
* Enable USB input
* Get rid of variables that adapted runscript to other platforms than x86_64
hardware with nova and instead restrict the run script to this platform
* Use a dynamic config for routers
* Switch label of the uplink of router 1 so it connects to Wifi and NIC driver
alternately
* Let uplink domain tag appear and dissapear
Issue #2815
Automated test for switching the NIC-router uplink between NIC driver and Wifi
driver with DHCP and different subnets. Tests also removal and later re-
insertion of the uplink domain tag.
Issue #2815
When re-configuring the NIC router, determine for each domain if at least one
interface stays with the domain. If a domain fullfills this and has a
dynamic IP config (received via a DHCP client), keep the IP config.
To achieve this, the following changes have been made to the existing NIC
router code:
* Split-up Interface::handle_config into three steps:
1) Determine for each interface if its domain can keep its IP config or
or if it has to mark it invalid. This must be done before (re-)attaching
any interface because during "attach" several decisions are made based on
the validity of the IP config of corresponding the domain.
(E.g. whether to participate in sending DHCP DISCOVERs {IP config
invalid} or whether to participate in sending pending ARP REQUESTs
{IP config valid} ).
2) Detach, attach, or re-attach each interface according to the
configuration. This must be done before re-considering the temporary
state objects of each interface because the latter might have effects
on the interfaces of remote domains which must then be in place already.
3) Re-consider temporary state objects of each interface. (E.g. transport
layer connection states)
* Re-work IP-config setter in a way that it works as follows:
1) If the old IP config is valid, let all local interfaces as well as remote
interfaces that depend on the IP config of the domain detach from the old
IP config.
2) Overwrite with new IP config
3) If the new IP config is valid, let all local interfaces as well as remote
interfaces that depend on the IP config of the domain attach to the new
IP config.
Issue #2815
The new attribute config.domain.label has effect only at the uplink
domain-tag. It determines which label the NIC router shall use when
requesting the NIC session for the uplink domain. If value of this
attribute changes at the uplink domain-tag, the NIC router closes and
re-requests the NIC session of the uplink with the new label.
Issue #2815
This tests the case that behind a NIC router domain there are not only
directly connected clients of the subnet but also Layer 2 indirections like
a switch or a bridge which might be interesting for example for testing the
NIC routers DHCP server implementation.
Fixes#2837
Set DHCP-DISCOVER retry timeout and DHCP-REQUEST retry timeout from 10
seconds to 2 seconds. This prevents problems with tests where the NIC
driver comes up slowly and the first packets of the DHCP client get
dropped.
Issue #2837
The Ethernet destination MAC address of a DHCP reply is not the same as the
DHCP client MAC address. The DHCP server of the NIC router did not take care
of this by now.
Issue #2837
Properly initialize and reset the _owner member, otherwise
correlating the unlock operation with the respective read/write
lock does not work.
Move locking the _nbr_mutex in the unlock operation after the
owner check. Otherwise, a reader holding that mutex and waiting
for the write lock would deadlock a writer trying to unlock the
_global_mutex.
Ref. Componolit/componolit#86
Ref. #2656Fixes#2832
When an environment session is provided by a async service such as a
sibling component, the session metadata must be preserved until end of
the lifetime of the session at the server has been acknowledged by the
server. Since the session meta data of env sessions are always part of
the 'Child' object, the destruction of this object must be deferred
until this point.
Merge the 'Packet_handle' into the 'Rom_root' and use an Id_space to
match File_system handles to session objects rather than a list. This
avoids the need to override 'Root_component::_destroy_session'.
Fix#2833
When exhausted of RAM quota while starting children, init used to throw
an uncaught 'Out_of_ram' exception as this condition was considered
fatal. However, this behavior is undesired when init is used in a highly
dynamic yet long-running fashion like sculpt's runtime subsystem. This
change keeps init running despite the error condition, giving the user
the chance to relieve the resource pressure.
If ACPI IRQs are received but no changes to the watched state for a specified
count can be observed, than generate nonetheless a Genode report.
Issue #2816
The 'View_stack::draw_rec' method limited the redraw to parts of the
view that were explicitly marked as dirty. This does not produce the
desired result when stacking multiple transparent views. Here, the
background views must be drawn regardless of whether they are marked as
dirty or not.
Rename LwIP library in preparation for removal of LwIP libc plugin. The
current LwIP library will be replaced with a new version stripped of its
synchronous socket support. The next version will be incompatible with
the current, so removing 'lwip.lib.so' completely for a period makes it
easy to identify legacy users.
Fix#2797
This patch makes the 'List_model' utility robust against duplicated
occurrences of node IDs in the supplied XML data. If two or more XML
nodes correspond to the same model element, the existing element is
updated with the information of the subsequent XML nodes.
This patch enhances the box layout such that child widgets are
equally stretched to the available size whenever the box layout's
size is larger than its min size. Furthermore, it corrects the
mixed-up use of the terms east and west in the float widget.
The file may also be changed by other components, so a open-close cycle
for write() is more robust. For example, Vim removes the original file
and recreates with the new content.
This component creates a GPT on a Block device. It supports the common
actions, as in adding, deleting and modifying entries in the GPT, while
considering alignment constraints. If needed it will round the length of
a partition down to meet those constraints. The component will not
perform layout checking, i.e., it does not care about overlapping
partitions. Only when apping a partition it will make sure that the
partition will fit.
Please read _repos/gems/src/app/gpt_write/README_ for more detailed
information on how to use the component and feel free to check out
_repos/gems/run/gpt_write.run_.
Fixes#2814.
The box-layout widget used to trigger the geometry animation of its
children immediately when updating the widget from the XML model (by
calling 'child->Widget::geometry'). This caused layout inconsistencies
in situations where the box layout is defined not by the constraints of
the child widgets but from the outside (the parent calls Widget::size).
Since the final layout is not known before the parent defines the actual
size, this patch moves the trigger point for the geometry animation to
'Widget::size'.
The new 'version' attribute can be used to explicitly distinguish
widgets that have the same name. E.g., if one widget is removed and
another with the same name is created somewhere else at the same time,
the menu view would normally interpret this change as a movement.
By attaching a distinct 'version' the new instance, menu view won't
attempt perform a smooth transition between the old and new widgets.
The '_active_mode' must not be changed at any time except when the
client asks for the 'Framebuffer::mode'. Otherwise, the dimensions of
dataspace used by the client is not always consistent with the mode
information as gathered by the client.
Generic code that operates over both UDP and TCP sockets might use
'sendto', but in the case of TCP the destination address ought to be
safely discarded. This seems to be the case for certain DNS software
that operates over both UDP and TCP.
Fix#2807
On real hardware, the tests expect an IPv4 subnet such that UDP requests
to 10.0.0.2 port 12345 get answered with an ICMP destination port unreachable.
Issue #2775
support USB NIC
Issue #2788
Set DHCP discover timeout to 1 second because, for some reason, the first
DHCP discover attempt of the NIC router on the PandaBoard times out with the
nightly test infrastructure.
Issue #2788
Adaption to mac-address allocation changes
Normally, the NIC sessions are independent from the domain tags.
However, by now the uplink session, in contrast to the sessions of the
other domains, is still not a server but a client. This means that only
the NIC router itself can decide when to open and close uplink sessions
and how many. Thus, with this commit, we break with the pattern that
session lifetime is independent from domains by letting the NIC router
create the uplink session when the uplink domain appears and close the
session when the domain disappears.
Fixes#2795
Since the router MAC is allocated like the donwlink MACs it can't happen
anymore that these MACs clash, for instance due to nested routers. Thus,
the range of the MAC allocators of nested routers must not be exclusive
anymore which deprecates the 'mac_first' configuration attribute.
Issue #2795
Allocate a virtual MAC address at runtime that is used as router
Ethernet-identity for all downlink domains. This makes the downlink
domains independent from the uplink session.
Issue #2795
The old MAC allocator had several drawbacks:
* the address base was a public static that could and must have been written
directly from outside the class
* the in-use-flag array was based on unsigned values consuming 4 bytes each
for only one bit of information
* it was a public header that we actually don't want to expose to all
components but only to the few networking components
* it used the not-so-safe bit notation for integer members of GCC
The new version fixes all these drawbacks.
Issue #2795
Instead of handing over the maximum available size to the packet data
accessors, hand over a size guard that keeps track of the packets
boundaries.
This commit also moves the size-guard utilitiy header of Ping and NIC
Router to the include/net directory making it a part of the net library.
It applies the new approach to all net-lib users in the basic repositories.
Ping looses its configurability regarding the ICMP data size as this would
require an additional method in the size guard which would be used only by
Ping.
The size guard was also re-worked to fit the fact that a packet can
bring a tail as well as a header (Ethernet).
Issue #2788
For now it is enough to differentiate the most commonly used file
system on Genode, e.g. Ext2 for the Genode partition and FAT32 for
(U)EFI partitions.
Issue #2803.
The component will now always try to parse the MBR as well as the GPT
(in this order). It will bail out if both are considered valid, using
GPT/MBR hybrid tables is not supported.
Fixes#2803.
Issue #2778
The "create_grub2" script functionality is moved to the g2fg contrib sources
and also the GRUB2 head image (tool/grub2-head.img). The head image is now
partitioned as GPT and bootable in BIOS legacy mode.
issue #2791
pthread_attr is not associated with any thread, the statistics must be
gathered at runtime, while 'pthread_attr_get_np' may retrieve attributes
by from any thread. Addtionally, the attributes given to
'pthread_create' will most likely be deleted after the creation call.
The sole existence of shared-object dependencies lead to fatal
static-constructor errors before. Now, ldso checks if the ctors section
of objects in the init list are non-empty before whining.
Issue #2759
This patch addresses the corner case where hovering changes while a
button is held, e.g., when accidentially moving the pointer out of a
application window's area during a drag-and-drop operation. The patch
makes the window manager aware of the drag/idle state. Only when idle,
the pointer position is propagated to the decorator now.
Socket_fs sockets are now created each time a 'new_socket' control file
is opened, not each time a 'new_socket' file is read. When a handle on a
'new_socket' file is closed the socket and its socket files are
destroyed. The accept control file on a listening socket reads "1" or
reads nothing to indicate a client connection is queued. Client sockets
are accepted by opening an 'accept_socket' file in the listen socket
directory. This file behaves like the aforementioned 'new_socket' file.
Ref #2707
The nic_bridge test is not suitable to be executed on hardware so it should,
in case, print an appropriate message and return without doing anything else.
Issue #2788
The Ethernet payload may be followed by padding of variable length and
the FCS (Frame Check Sequence). Thus, we should consider the value
"Ethernet-frame size minus Ethernet-header size" to be only the maximum
size of the encapsulated IP packet. But until now, we considered it to
be also the actual size of the encapsulated IP packet. This commit fixes
the problem for all affected components of the Genode base-repository.
Fixes#2775
This reduces the redundant implementations of checksum calculation to
one generic implementation, makes the checksum interface conform over
all protocols, and brings performance optimizations. For instance,
the checksum is now calculated directly in big endian which saves us
most of the previously done byte-re-ordering.
Issue #2775
When the former trace buffer implementation wrapped, the last entry
according to commit order couldn't be detected anymore. Now, the last
committed entry is always followed by an entry with length 0.
As a downside of this, there are now two meanings of "last" entry: It
means either that the entry marks the empty padding after the entry with
the highest memory address or that it actually marks the end of the
buffer according to commit order. This is an example state of the buffer
with the two types of "last" entry:
last last
+-------------+------------+---+---------+-------------+------------+---+-------+
| len3 data3 | len4 data4 | 0 | empty | len1 data1 | len2 data2 | 0 | empty |
+-------------+------------+---+---------+-------------+------------+---+-------+
If the entry with the highest memory address fits perfectly, the first
type of "last" entry is not needed:
last
+------------+--------------------+---+-------+-------------+-------------------+
| len3 data3 | len4 data4 | 0 | empty | len1 data1 | len2 data2 |
+------------+--------------------+---+-------+-------------+-------------------+
If the buffer didn't wrap so far, there is only one "last" entry that
has both meanings:
last
+--------------------------+------------+-------------+---+---------------------+
| len1 data1 | len2 data2 | len3 data3 | 0 | empty |
+--------------------------+------------+-------------+---+---------------------+
Issue #2735
Co-authored-by: Martin Stein <martin.stein@genode-labs.com>
Replace packet method 'T *data' by the new methods 'T &reinterpret_data'
for parsing or modifying existing sub-protocol packets and 'T
&construct_at_data' for composing a new sub-protocol packet. This has
the advantage that, when composing a new packet, the default constructor
that zero-fills the packet is always called first.
Fixes#2751
This commit changes the 'Input::Event' type to be more safe and to
deliver symbolic character information along with press events.
Issue #2761Fixes#2786
By now, rump would query its available RAM quota to determine the
memory limit minus some RAM reserved for Genode meta-data. This
does not work when the VFS rump plugin is used as the available
quota belongs to the VFS server. In this case the memlimit should
be set by specifing the RAM in the plugin's config, e.g.:
! <vfs>
! <rump fs="ext2fs" ram="64M" writeabl="yes"/>
! </vfs>
Fixes#2783.
In Vm_space::map when allocating a new page-table-entry selector, the
allocator may throw an exception that there are no selecztors left which
was not caught by now. Now, we catch this exception, flush the mapping
cache to free all selectors again and retry to allocate.
Fixes#2781
On the Raspberry PI, the 2 seconds of round time in the polling test
were not sufficient to reach the goal of at least 1000 successful polls.
Thus, the commit sets the round time to 2.5 seconds which doesn't hurt to
much but allows the RPI to just make it.
Fixes#2779
This patch largely reverts the feature of selecting parts of input nodes
from within the output node (as originally introduced by commit
7263cae5a18b4f1f2293d031f9bafcf05ba51146). The selection of content
should be consistently performed by input nodes instead. The principle
ability of copying input nodes verbatim into the output stays available.
Issue #2691
The new 'attribute' and 'value' attributes of input nodes
can be used to select input sub nodes that match the presence and value
of the specified attribute.
Issue #2691
By incorporating the sculpt version into the path where customizations
are stored, we can update and roll back sculpt versions without risking
configuration incompatibilities. By default, the sculpt version
corresponds to <genode-dir>/VERSION.
The condition must first check the io-buffer length and then check the
content. Otherwise, cat'ting a file that is padded with zeros up to
page size (io-buffer size) yields an out-of-range read access.
This patch replaces the terminal's formerly built-in fonts with the new
VFS-based font handling.
To avoid the copying of the terminal's font configuration across run
scripts, this patch adds the new terminal/pkg runtime package, which
includes everything needed for instantiating a terminal: the actual
terminal component, the library dependencies (vfs_ttf, which in turn
depends on the libc), a font (bitstream-vera), and a reasonable default
configuration.
Fixes#2758
The 'stat' method is called for all paths, not just the specific file
system node of the ROM module. The ROM update is needed only in the
latter case.
Otherwise, when always updating the ROM on stat, stat calls on the VFS
become very expensive in the presence of a mounted ROM module if the ROM
is obtained from fs_rom (which re-watches the file and all its
individual path elements whenever the 'update' RPC function is called).
This patch make the scenario independent from device drivers, which were
solely needed to display a graphical terminal. The output of the
scenario is now printed via the log_terminal component, which makes the
logging output of nightly tests more useful.
The pattern rule picked up the wrong platform_services.cc in the
depot-archive case only because the archive integrates generic and
sel4-specific source files into REP_DIR.
The Ada runtime can now be set with the ADA_RTS variable. The ada
library builds a (currently) minimal runtime from the gcc sources that
come with Genode (to stay consistent with the used compiler) and sets
the runtime path accordingly. It is build as a shared library ada.lib.so
which needs to be added to the build files.
I split the existing Ada test into program and library, and moved it
to libports as it depends on the runtime library residing in this
repository too.
Fixes#2748
VFS plugin to replicate from one file-system to another. Can be used to
seed a mutable file-system with an immutable file-system. The plugin is
configure with two paths, a read-only path, and a read-write path. This
is an initial implementation that copies files on open. It is not
optimized to perform actual copy-on-write, but the result is the same.
<vfs>
<dir name="immutable"> ... </dir>
<dir name="mutable"> ... </dir>
<dir name="cow">
<cow ro="/immutable" rw="/mutable"/>
</dir>
</vfs>
Fix#2745
Reduce the size and forward compatibility of VFS file-system
constructors by passing an object holding accessors for 'Genode::Env',
'Genode::Allocator', response handlers, and the root file-system.
Fix#2742
When working with GPIO interrupts on i.MX6SX for Ethernet PHYs
it became obvious that the GPIO driver repeatedly receives interrupts
for the same event, because it acknowledges the interrupt before a
client has handled the event.
Ref #2750
In other words: Loosen the former property that suspend can only be
called from the first user stack and, thus, enable additional user
stacks, e.g., in coroutine libraries.
Fix#2737
This driver component provides support for using consumer NVMe storage
devices, i.e. it omits name space managment and will always use the
first name space, on Genode. For now it defaults to a reasonable low
configuration:
- 1 I/O queue (completion/submission tuple)
- 128 entries in the I/O queue
- 4096 as the only I/O transaction memory page size
Fixes#2747.
The 'default' attribute is useful to change the default value for those
protocol attributes that are not explicitely set in the configuration of
the component.
Issue #2738
Each supported protocol now has an attribute with the name of the protocol in
the config tag. Each of these attributes accepts one of four possible values:
* no - do not print out this protocol
* name - print only the protocol name
* default - print a short summary of the most important header values
* all - print all available header values
Example:
! <config eth="name"
! arp="all"
! ipv4="default"
! dhcp="no"
! icmp="all"
! udp="no"
! tcp="default"
! ... />
Corresponding output example:
! ETH IPV4 10.0.2.212 > 10.0.2.55 time 7158 ms (Δ 11 ms)
! ETH IPV4 10.0.2.55 > 10.0.2.201 TCP 80 > 49154 flags ' time 6976 ms (Δ 5 ms)
! ETH ARP hw 1 prot 2048 hwsz 6 protsz 4 op 1 srcmac 02:02:02:02:02:01 srcip 10.0.2.212 dstmac 00:00:00:00:00:00 dstip 10.0.2.55 time 7074 ms (Δ 98 ms)
Issue #2738
Nitpicker's 'Session:focus' call used to trigger a one-off focus change
at call time. This focus change did not pass the same code paths as a
focus change triggered by a "focus" ROM update, which led to
inconsistencies.
This patch changes the implementation of 'Session::focus' such that the
relationship of the caller and the focused session is preserved after
call time. Whenever the calling session is focused in the future, the
specified session will receive the focus instead. So 'Session::focus'
represents no longer a single operation but propagates the information
about the inter-session relationship. This information is taken into
account whenever the focus is evaluated regardless of how the change is
triggered.
This makes the focus handling in scenarios like the window manager more
robust.
Issue #2746
Relative motion events with a motion vector of (0,0) should not exists.
They cause jittery movements of nitpicker's pointer position. This
patch filters out such events.
This tests ping with simple IP forwarding, ping with NAPT as well as
forwarding of ICMP "Destination Unreachable" messages through the NIC
router.
Issue #2732
The 'ping' component continuously sends ICMP Echo requests to a given IP host
and waits for the corresponding ICMP Echo replies. For each successfull ICMP
Echo handshake it prints a short statistic. By now, it can be used only with a
static IP configuration. The size of the ICMP data field can be configured. It
gets filled with the letters of the alphabet ('a' to 'z') repeatedly.
Issue #2732
Originally, the timeout framework caused deadlocks when acquiring the same
lock from different timeout handlers. This use case is now tested in the
timeout test.
Fixes#2704
To handle all pending timeouts in the context of scheduling a timeout
was only necessary because the Timeout framework once made use of the
Alarm framework. The method Alarm_scheduler::schedule_absolute took an
absolute deadline as argument and we couldn't change this beause the
Alarm framework was also used without the Timeout framework. We had to
calculate this absolute deadline with the now time of the Timeout
framework but the Alarm framework has its own now time that is always a
bit behind the one of the Timeout framework. This lead to bad decisisons
when finding the right position for the new timeout. Now, we can call
schedule_absolute with a relative duration and thereby fix the problem.
When we schedule an absolute timeout without considering the small time
difference, the end-time for the timeout that is calculated using the
local time value is also smaller than the expected end-time. This can
also lead to directly triggering timeouts that should have triggered
with a certain delay.
As it is not trivial to update the local time value while scheduling a
timeout _without_ calling other timeout handlers, we simply raise the
duration of the new timeout by the age of the local time value.
Issue #2704
This fixes the problem that large timeouts, when rescheduled, are interpreted
to be from the last now_period instead of, what would be right, the next
now_period. This occured if there were multiple pending alarms at the head of
the queue and the reschedule of the first one was done with the other outdated
deadlines still in place.
Issue #2704
Instead of taking the absolute deadline of a timeout as argument from
outside (where it is calculated with a freshly requested now time), we
now take a relative duration as argument and calculate the deadline with
the scheduler-internal now time (which can be a little bit outdated).
This enables us to schedule timeouts without updating the internal now time
and thereby handle all pending timeouts.
Issue #2704
Integrate the code of the Alarm framework directly into the Timeout
framework. The former Alarm-framework methods are all private to the
corresponding classes of the Timeout framework and get prefixed with
'_alarm__'. The latter avoids name clashes and makes it easier to
simplify the code later.
Issue #2704
In the domain class there were several places where output was generated
not conforming to the typical output format of the router ("[domain]
event: parameters").
Issue #2670
When having an interface that yet is not attached to a domain, then a new
configuration comes in and the interface receives a domain name (via the
policy tag) but the corresponding domain doesn't exist, an exception
Domain_tree::No_match is thrown but was not caught and handled until now.
Issue #2670
This follows the guidelines in RFC 5508 to enable forwarding of ICMP
"Destination Unreachable" that correspond to an existing link state in
the NIC router. It also serves as blueprint for forwarding ICMP error
messages in general (They are merely not enabled because we don't test
them).
Issue #2732
By now, the 'verbose packets' output when sending packets was printed after
finish sending the packet. This makes following the packet flow harder if you
have multiple components that print such information.
Issue #2732
The mac_first attribute tells the MAC-address allocator of the router
from which MAC address to start allocating. This is useful, for
instance, if you have nested nic_routers. In this case, identical
MAC-allocator settings have led to name clashes in the past, so, you
want to be able to configure them differently.
Issue #2732
This follows the guidelines in RFC 5508 to enable ICMP echo through a NAPT
channel of the NIC router. It serves also as blueprint for ICMP queries in
general (they are merely not enabled because we don't test them by now).
Issue #2732
The 'verbose packets' output previously was not generated for Interfaces
without a domain. But this is desirable as the router nonetheless
receives packets at such interfaces. This is now fixed and such output
is simply prefixed with a "[?]" denoting that the interface has no
domain.
Issue #2732
We missed to zero-out the ECN field in IPv4 packets. We don't use the ECN
field but there might be old data left in the packet RAM allocated by the
NIC packet streams. If we don't zero-out ECN it might leak old data.
Issue #2732
Add a new 'Vfs_watch_handle' type to the VFS interface. This handle type
will pass a handle context up through the I/O handler to the application
when a notification event occurs.
Watch support implemented for RAM and File_system plugins, all other
file-systems return WATCH_ERR_STATIC by default.
Test at run/fs_rom_update_ram and run/fs_rom_update_fs.
Fix#1934
A ring buffer that uses a single dataspace mapped twice in consecutive
regions. This allows any operation that is less or equal to the size of
the buffer to be read or written in a single pass. The capacity of
Magic_ring_buffer is defined at runtime.
Fix#2725
This commit introduces a VFS plugin that exposes the glyphs and
metadata of a TrueType font as a pseudo file system. The TTF font data
is obtained from the VFS. The resulting pseudo file system is a
directory that contains the files 'glyphs', 'baseline', 'max_width',
and 'max_height'.
The counter part of the plugin is the 'Vfs_font' class that implements
the 'Text_painter::Font' interface by accessing the pseudo file system
as provided by the TTF VFS plugin.
Fixes#2740
This patch enhances the VFS access utilities of gems/vfs.h to be usable
with a prior created root directory. It also adds a
'File_content::bytes' method for operating of the raw content, which is
needed in situations where the data pointer is passed to a third-party
parser.
This patch improves the `Text_painter` utility that is commonly used by
native Genode components to render text:
- Support for subpixel positioning
- Generic interface for accessing font data
- Basic UTF-8 support
Since the change decouples the font format from the 'Text_painter' and
changes the API to use the sub-pixel accurate 'Text_painter::Position'
type, all users of the utility require an adaptation.
Fixes#2716
This file system is meant as a building block for pseudo file systems
that host a directory of several small files where each corresponds to
an attribute of the pseudo file system.
By letting the 'Dir_file_system' accept an arbitrary 'File_system'
as root directory, we can use the 'Dir_file_system' as a building
block for creating other file-system types.
This patch enables the use of the VFS from VFS plugins by passing a
reference of the root directory to the constructors of file-system
instances. Since it changes the signature of 'Vfs::Dir_file_system',
any code that uses the VFS directly requires an adaptation.
Fixes#2701
Aligning memory to page size will require at lead 8KB per allocation (even for 8
bytes). This should severely reduce memory requirements of all dde_linux
projects.
related to #2731
If the remote DNS server address value of a DHCP server changes, the affected
interfaces do a link down/up to inform all DHCP clients that they should
re-request their DHCP info.
Issue #2730
The dns_server_from attribute of the dhcp-server tag has effect only if
the dns_server attribute of the same tag is not set. If this is the
case, the dns_server_from attribute states the domain from whose IP
config to take the DNS server address. This is useful, for instance, if
the stated domain receives the address of a local DNS server via DHCP.
Whenever the IP config of the stated domain becomes invalid, the DHCP
server switches to a mode where it drops all requests unanswered until
the IP config becomes valid again.
Issue #2730
Until now, the DHCP server of a domain was re-constructed each time the
IP config changed. This is not necessary as a domain that acts as DHCP
server must have a static IP config as it would be senseless to act as
DHCP server and client at the same time. Now, a configured DHCP server
is constructed only when the Domain gets constructed and stays alive
until the domain gets destructed. Furthermore, we now throw Domain::Invalid
if there is no static IP config plus a DHCP server configured. However, by
now, this exception is not caught as it is not trivial to destruct the
domain at this point.
Issue #2730
The Interface constructor previously tried to attach to a domain. This
might include sending a DHCP request to get the domain a valid IP config.
But in order to achieve this, the constructor used a pure virtual method
of Interface which crashes due to the unfinished vtable. To fix this bug,
the attach attempt was moved to a new Interface::init method.
Issue #2730
Instead of Pointer<T>::set use assignment operator with implicit constructor
from T-reference. Instead of Pointer<T>::unset use assignment operator with
Pointer<T>(). Instead of Pointer<T>::deref provide () operator.
Issue #2730
A very basic test of the re-configurability. It overwrites the configuration
once without making any changes, once with removing all domains except
uplink, and a third time recovering to the initial configuration to see if
the clients keep going as soon as their domains are back.
Fixes#2670
The router reacts as follows to a configuration change:
1) Construct new internal configuration representation (the old one stays
in place to be able to do comparisons in the following steps)
2) Iterate through all user-dependent objects (interfaces, link states, ARP
information, DHCP information) and re-check which remain valid with the
new configuration and which must be dismissed.
3) Adapt the objects that remain valid to the new configuration (re-write
references) and remove or detach the dismissed objects.
4) Do a link state DOWN at each interface and a link state UP at each
interface that remains attached to a domain.
5) Replace the old internal configuration representation with the new one
This way, the router keeps as much user dependent states as possible
while going through a configuration change. Thus, overwriting the old
configuration with an exact copy of itself is (almost) transparent to
clients of the router. Almost, because there are things the router must
do on every configuration handling, like re-scheduling the expiration
timeouts of links.
Ref #2670
The for_each method of the List wrapper remembers the next list item
before calling the functor on the current one, so, the current one can
be destroyed during the functor.
Ref #2670
Clients can connect at any time to the NIC router. The interfaces (sessions)
get attached to the appropriate domain as soon as it appears. This implies
that interfaces can also be detached from a domain without beeing destructed
when the domain disappears. All user dependent states of an interface such as
the link states, DHCP allocations and ARP information get lost when the
interface gets detached.
Ref #2670
This separates the decision wether to log the received and sent packets
from the 'verbose' attribute. This information is now only logged if
'verbose_packets' is switched on. If 'verbose' is switched on, only
routing decisions and optional hints are printed.
Ref #2670
We disable super-page I/O mappings because our unmap code does not flush
local mappings from core and, thus, breaks later re-mappings of
different page size.
Issue #2547
Switch port I/O based PCI config space access to memory-mapped IO. The
base address of the PCI configuration space is acquired by mapping the
ACPI ROM and reading the first <bdf> node. An exception is thrown if the
first <bdf> node is not for PCI domain zero or if multiple <bdf> nodes
exist. This is to reduce complexity and also because multiple PCI
domains are rare.
The PCI configuration space is accessed via I/O mem dataspace which is
created in the platform_drv root and then passed on to the PCI session,
device components and finally to the actual PCI config access instances.
The memory access code is implemented in a way to make it work with Muen
subject monitor (SM) device emulation and also general x86 targets. On
Muen, the simplified device emulation code (which works also for Linux)
always returns 0xffff in EAX to indicate a non-existing device.
Therefore, EAX is enforced in the assembly templates.
Fixes#2547
The KIP address range resides in virtual memory while io_mem alloc
manages physical-address ranges.
The patch enables the use of ECAM/MMCONF for PCI configuration.
Issue #2547
Link the EGL library with Mesa. SDL's `GL_GetProcAddress` now calls
`eglGetProcAddress` rather than lookup procedures directly in the Mesa
library.
Components may still wish to list 'mesa_api' in LIBS to access OpenGL
headers.
Fix#2711
Adjust managed dataspace (== max memory provided to rump kernel) based
on 32/64 bit architecture. On 32bit is it 256M, on 64bit is 4G.
Additionally limit the actual announced memory to rump by the available RAM and
by the maximum size of the managed dataspace.
Fixes#2709
The visibility of the client's view is re-evaluated at each animation
step. However, when the client appears long after the initial
fade-in/out animation is completed, the initial visibility state
remaines unchanged. This happens when booting the Sculpt scenario in
Qemu where the the nit_fb instances of the leitzentrale could not be
started in time. This patch fixes the issue by re-evaluating the view
visibility also at the view-creation time.
This prevents diagnostic messages like
Error: partial write detected 0 vs 31
for writes into already released socket directories due to a still-open
handle to the socket data file.
We need to update the blueprint pkg path as well in case the start node
is changed. Otherwise the query tool will keep using the initially
configured pkg path.
In case the signature file is corrupt, e.g. it could not be downloaded
successfully, the gnupg code just prints an error message but will not
return the error to the user. So we patch the code to return the error
and check the value in the calling code.
The sinfo API now also exports PCI devices without logical IRQs.
Therefore, explicitly check interrupt count in get_msi_params() function
and ignore such devices.
- Use latest Muen version
- Sync VirtualBox Muen subject state
- Drop unneccessary subject IP patch
- Adapt Muen RUN_OPTs
- Update documentation
Note: the GPL 2017 toolchain is now required and as the debug output
format has changed the mulog-subject.py script must be updated on
autopilot instances.
Remove the dependency on the deprecated LwIP libary.
Remove the progress logging callback. Should a progress indicator be
desired, a progress report would be more appropriate.
Fix#2684
This patch improves the error handling for the case where the depot
lacks the content of the to-be-deployed pkg. Instead of infinitely
reattempting to obtain blueprints for such content, the deploy tool
prints a single message.
This patch adds two key remappings for the magic keys of the sculpt
scenario. KEY_DASHBOARD toggles the leitzentrale. KEY_RESTART resets
the noux-control subsystem of the leitzentrale.
Issue #2676
If only a single AHCI device is present, the block service provided by
the drivers subsystem allows the client to refer to this block device
via the label 'default'.
Issue #2676
This patch adds a safety check to nit_fb to ensures that nit_fb never
runs out of RAM. Should the available RAM not suffice for resizing the
virtual framebuffer to a new mode, it keeps the current mode.
The Dir_file_system uses static cast to convert handles from the
application to a plugin local type. For this reason, only the local
handle type may be returned from 'opendir' or 'open'. This fixes the
unexpected behavior when opening directories as files.
Fix#2533
This patch removes the notion of partial writes from the file-system
servers. Since write operations are asynchronously submitted, they are
expected to succeed completely, except for I/O errors. I/O errors are
propagated with the write acknowledgement but those are usually handled
out of band at the client side. Partial writes must never occur because
they would go undetected by clients, which usually don't wait for the
completion of each single write operation.
Until now, most file-system servers returned the number of written bytes
in the acknowledgement packet. If a server managed to write a part of
the request only, it issued the acknowledgement immediately where it
should have cared about writing the remaining part first.
The patch detects such misbehaving server-side code. If partial writes
unexpectedly occur, it prints a message and leaves the corresponding
request unacknowdleged.
Issue #2672
File_system clients may now watch files and directories for changes by
opening a 'Watch_handle' rather than submitting a 'CONTENT_CHANGED'
packet to the server. When a change happens at a node with an open
Watch_handle a CONTENT_CHANGED packet will be sent from the server to
the client. This serializes registration with other handle operations
and separates I/O handle state from notification handle state.
Test at run/fs_rom_update.
Ref #1934
Catch out of RAM and capability exceptions and return error values.
Abort opening a composite directory at Dir_file_system where an
opendir call on any child file-system returns an OUT_OF_RAM or
OUT_OF_CAPS error.
Ref #2642
This change enables the use of negative values for the 'initial_width'
and 'initial_height' attributes to specify values that are relative to
the screen size. This is consistent with the meaning of the 'width' and
'height' attributes.
This patch changes the 'depot_deploy' tool to spawn any number of
runtimes. In contrast to the original version, which merely consumed a
blueprint generated by a pre-configured 'depot_query' instance, the new
version actively generates queries as needed. So there is a feedback
loop between 'depot_deploy' and 'depot_query'. The instantiation of
subsystems is controlled by the '<start>' nodes of the 'depot_deploy'
configuration. For each start node, the tool tries to determine the
ingredients (provided by the depot) by asking the 'depot_query' tool.
Once the information is complete, a corresponding start node of the
dynamic init instance is generated.
This patch introduces the subnodes <provides>, <requires>, and
<content> to the <runtime> node. All <rom> sessions that are
expected from the depot appear within the <content> node, which
sets them nicely apart from <rom> sessions that may be required
as runtime arguments.
Note that the <requires> and <provides> nodes do not appear in the
patch because the existing depot_deploy tool does not interpret this
information (the pkg/test-fs_report runtime does not provide any
service, and the timer session is provided as a common route).
This patch adds the config attribute 'query'. If set to the value "rom",
the query information is obtained from a ROM session labeled "query".
Otherwise, the query information is expected to be part of the config.
This enables us to use the component in two different scenarios. In
one scenario, 'depot_query' is embedded in a managed dynamic init.
Here, taking the query from the config is easy. In the other scenario,
'depot_query' is running as a daemon with a once-configured VFS but
varying queries. The queries originate from a component that does not
control the 'depot_query' config.
The new 'Terminal_session::size_changed_sigh' RPC function registers a
signal handler that is triggered each time when the terminal size
changes. It enables the client to adjust itself to the new size by
subsequently calling the 'size' RPC function. Of all terminal servers,
only the graphical terminal triggers this signal.
- handle line wraps in 'ech()'
- take (1,1) origin into account in 'hpa()' and 'vpa()'
- unify handling of SGR escape sequences of different lengths
- accept the '[?2004h' and '[?2004l' escape sequences (used by midnight commander)
Fixes#2671
The 'Expanding_reporter' wrapper for the 'Reporter' eliminates
the burden of handling 'Xml_generator::Buffer_exceeded' exceptions
from components that generate reports.
Fixes#2655
Instead of having a lot of platform specific quirks in the run test,
and to also test it on platforms currently missing a NIC driver,
this commit removes hardware drivers from the nic_router and
nic_bridge run scripts, and uses the nic_loopback server instead.
AVL trees can't be copied with the default copy constructor as the
parent pointer of the first item of both of the resulting trees would
point to the original tree. Copying an AVL node, however, generally
violates the integrity of the corresponding tree. The copy constructor
of Avl_tree is used in some places but in those places it can be
replaced easily. So, this commit deletes the copy constructor of
Avl_node_base which makes Avl_node and Avl_tree non-copyable.
Issue #2654
On platforms without nic or audio driver support, the corresponding
functions to return the correct names should return a meaningful
name instead of an empty list. Otherwise, in an erroneous run-script
that calls those functions to append names to the boot modules
the whole 'bin' directory is appended instead, which leads to big
image files or errors when linking the boot modules to core.
This patch adds hooks for customizing the location of the configure
script within the package, the build target, as well as the install
step. This is useful for packages like tcl that deviate from the
usual layout of source packages.
Issue #2648
The 'trace_logger' component can be used to easily gather, process and export
different types of tracing data. Which subjects to select is configurable via
session label policies and thread names. Which data to collect from the
selected subjects can be configured for each subject individually, for groups
of subjects, or for all subjects. The gathered data can be exported as log
output.
This is an example configuration of the 'trace_logger' component which shows
the default value for each attribute except the policy.thread and
policy.label:
! <config verbose="no"
! session_ram="10M"
! session_arg_buffer="4K"
! session_parent_levels="0"
! period_sec="5"
! activity="no"
! affinity="no"
! default_policy="null"
! default_buffer="4K">
!
! <policy label="init -> timer" />
! <policy label_suffix=" -> ram_fs" />
! <policy label_prefix="init -> encryption -> "
! thread="worker"
! buffer="4K"
! policy="null" />
! </config>
For more details see os/src/app/trace_logger/README.
Fixes#2654
Building this policy was disabled by a REQUIRES = riscv_toolchain_bugfix
to prevent compiler crashes on nightly test builds. Since the latest
RISCV toolchain update, test builds for RISCV crash at much more places
which makes this single work-around senseless.
Issue #2654
