* Provide paravirtualized block API for accessing the second partition
of the block device that is provided by the ESDHC driver.
* Provide paravirtualized serial API for sending log-output over Genodes
serial port.
* Use the latest Linux suggested in the USB Armory Wiki [1] when on USB Armory
while still using the older vendor Linux when on i.MX53 QSB. I.e.,
provide a device tree through RAM and a rootfs through the paravirtualized
block device when on USB Armory while providing ATAGs and Initrd when on
i.MX53 QSB.
* Switch on the LED on the USB Armory when the VMM catches a VM-exception
and switch it off again when as soon as the exception is handled. This
merely show-cases the ability to instrument the LED for such purposes. In an
ideal world, the LED is switched on as long as we're on the "Secure Side"
and switched off as long as we're not.
* For further information see repos/os/run/tz_vmm.run
[1] https://github.com/inversepath/usbarmory/wiki/Preparing-a-bootable-microSD-imageFixes#1497
On the USB Armory, we want to secure different devices than on other i.MX53
implementations. Thus, add a board specific configuration that is interpreted
by the kernel Trustzone initialization.
Ref #1497
Enhance the VM state, that can be accessed by a VMM, by a member
'unsigned irq_injection'. In Kernel::Vm::proceed check, whether
irq_injection is set. If so, check whether irq_injection is a
non-secure IRQ. If so, let the PIC raise this IRQ in the VM and reset
irq_injection.
Ref #1497
Move ADMA2 stuff to extra header and unit. Move ESDHCv2 implementations to
extra unit. Use exceptions instead of error codes. Clean-up documentation.
Ref #1497
The manual termination of multi-block writes via "Stop Transmission" commands
seems to leave the card in a busy state sometimes. This causes errors on
subsequent commands. Thus, we have to synchronize manually with the
card-internal state via "Send State" commands. Additionally, the method
for issuing the manual "Stop Transmission" commands was refined.
Ref #1497
We have to issue a data synchronization barrier after writing a ADMA2
table to ensure that the corresponding write commands were actually
executed before issuing the SD command.
Ref #1497
On i.MX53 QSB, a "Send Op Cond" command during the driver initialization
returns another response value than on the USB Armory. As the check for
this response seems to have no relevance for the driver functionality (Linux
reads the value from MMIO but I can't find a place in the source code where
it is used), we simply remove it.
Ref #1497
Previously, it was not necessary to acknowledge an IRQ initially before using
it. However, since the IRQ framework changed lately it is. Adapt to this.
Ref #1497
Notify client initially to enforce a client-side ROM update. Otherwise,
a server-side ROM update between session creation and signal-handler
registration would go unnoticed.
Issue #1788
This patch changes the decorator to always apply stacking-order changes
immediately instead of deferring the re-stacking of the nitpicker views
to the next call of 'update_nitpicker_views'. The deferred application
did not always work when more then one windows changed their stacking
position at once because the cached '_neighbor' values interfered with
each other.
The eager re-stacking should not have negative effects on the user
experience because, in contrast to re-positioning, re-stacking a rare
operation.
This change makes it possible to reuse the generic window decorator
classes in include/decorator/ for decorators of a different structure.
E.g., instead of painting decorations on a single nitpicker session,
each window may paint its decorations into additional window-specific
nitpicker sessions.
For each session upgrade performed by a wm client as part of the
Nitpicker::Connection::buffer function, the window manager wrongly
upgraded the wrapped nitpicker session twice: Once by handling the
Root::upgrade, and again by handling of the server-side 'buffer'
operation. Here, the 'buffer' operation was implemented by not merely
forwarding the RPC request to the wrapped nitpicker session but by
calling the 'buffer' method on the wrapped session's connection
object, which implictly issues session upgrades. Consequently,
the window manager would transfer twice the amount of the session
upgrades it received by its clients to nitpicker and eventually ran
out of memory.
The patch fixes the problem by eliminating the call of the
Nitpicker::Connection::buffer method and instead merely forward the RPC
requests to the wrapped nitpicker sessions.
The original version of the icon painter would reach beyong the
texture boundaries for textures of even width and height, and when
painting an icon with the width or height of the texture.
In this case, p3 would be set to the same value as p2. However, the code
expects p3 to lie within the middle rectangle. However, in this corner
case, the middle rectangle is actually empty. So no pixel can lie within
it. Hence, p3 is positioned by one pixel to the left outside the middle
rectangle, which violates the assumptions when calculating the clipping
and texture offsets. The patch fixes the problem by reducing the size of
the right column by one pixel. This ensures that exists always a
non-zero middle rectangle.
In the event where a nitpicker session's quota was depleted by the
allocation of view handles, nitpicker would abort. The patch prevents
the abort by reflecting this condition as an Out_of_metadata exception
to the client. This way, the client can upgrade its session as needed.
The problem was triggered by running the decorator_stress test (changed
to generate 40 windows) with the themed_decorator.
This patch addresses the corner case that the specified neighbor view
is the first view of the view stack. If this is the case when inserting
the view in front of the neighbor (behind == false), the target position
within the view stack must be a null pointer, not the first view.
Because the conditions have become rather complicated, both cases
of 'behind' are handled separately now.
'block_for_signal' and 'pending_signal' now set pending flag in signal context
in order to determine pending signal. The context list is also used by the
'Signal_receiver' during destruction.
Fixes#1738
Instead of just red messages in the log and a hanging caller, the issuer
may respond to it - e.g. a noux bash shell will show an error and is
afterwards still usable.
Fixes#1778
Accidentally removed by #1658. We need to make the cleanup call for server
objects - otherwise we may get in capability identifier re-use trouble.
Issue #1778
The notion of a channel is shared by the mixer backend as well as the
frontend. To make dealing with reports between those easier move the
Channel definition to a global header.
Issue #1770.
This effectively enables configuring builds with -O0 for rump sources.
Note, if the build directory is not clean, at least var/libcache/rump*
should be removed before building with changed etc/tools.conf.
The test performs several rounds of write-read cycles with the following
configuration attributes in a <write-read> config node
rounds determines the number of rounds (default is 4)
size determines the number of bytes written/read in one round
(default is 4 MiB)
buffer_size determines the size of the write-read buffer
(default is 32 KiB)
In one round the test writes and reads "size/buffer_size" times
from/into a buffer_size'd buffer.
Related to #1765
Instructions:
1. Create a file in terminal one in the 'ram' directory
! echo "test" > ram/test
2. Second terminal
! tail -f ram/test
3. First terminal
! echo "Meaningless output" >> ram/test
4. Observe second terminal
The pthread object for the main thread initializes its 'Thread_base' base
class part with a reference to the 'Thread_base' object of the Genode main
thread. Therefore the pthread object for the main thread should never be
destroyed, as this would also destroy the Genode 'Thread_base' object.
Fixes#1760
Trapping rdtsc creates a huge load in some guests, e.g. Windows 8.1,
that use this instruction very frequently. This influences audio
playback/recording in a bad way (distorted sounds, …). As a interim
solution disable the virtualization of rdtsc completely. As long
as each guest VM runs on its own CPU core it should be fine as there
should not be that much interference (TSC warping).
That being said, TSC offsetting as well as adjusting within vbox have to
be evaluated.
Fixes#1768.
The RAM quota currently dedicated to the wm and decorator components in
the 'qt5_common.inc' file is too low for a window of size 1920x1080.
Fixes#1761
- Align implementation to the current generic implementation
- Document NOVA-specific implementation of dataspace() (as in the
original commit message)
This patch, complements the existing vbox layout with a hbox layout and
improves the response to dynamic dialog updates. The new version support
disappearing widgets and the reordering of widgets. Furthermore, this
patch ensures that the 'Widget::_layout' functions are executed after
updating a new version of the dialog.
This patch ensures that focus changes performed via the Session::focus
call are made effective the next time, the user is idle. Previously,
focus changes during drag operations were simply discarded.
strip_last_element at Path removes everything after the trailing slash,
which causes lookup failures at the VFS server when opening directories.
Issue #1648
Throw Invalid_name, No_space, and Out_of_node_handles where appropriate.
Catch the new range of errors thrown by at the VFS.
Catch Out_of_node_handles at the VFS, but print a message and re-throw.
Issue #1648
This patch introduces a shortcut for conditional session routes of the
form '<if-arg key="label" value="..."/>'. With this change, the label
can be directly specified as 'label' attribute of an '<any-service>' or
a '<service>' node. The '<if-arg>' mechanism was not documented anyway
and I hope to be able to ultimately remove it.
Don't skip the cleanup call if a pager object is marked as blocked.
It happens that the pager_object is in destruction but it is also used
concurrently by the pager thread. The pager thread handling code may set the
pager object to blocked but still uses the pointer to the pager object. Avoid
locking at the state of the pager object and make the cleanup call everytime.
Error output looks like this, where the pf_ip is within
void Pager_object::_page_fault_handler(addr_t pager_obj)
method and the pf_addr is the stale pointer to the already released pager_object.
no RM attachment (READ pf_addr=xxx pf_ip=xxx from 00 <NULL>)
static void Genode::Pager_object::_page_fault_handler(Genode::addr_t): page fault, thread '<NULL>', cpu x, ip=xxx, fault address=xxx
PAGE-FAULT IN CORE (READ pf_addr=b10e0090 pf_ip=132dbc from 00 <NULL>)
Currently, when a signal arrives in the main thread, the signal dispatcher is
retrieved and called from the main thread, the dispatcher uses a proxy object
that in turn sends an RPC to the entry point. This becomes a problem when the
entry point destroys the dispatcher object, before the dispatch function has
been called by the main thread. Therefore, the main thread should simply send an
RPC to the entry point upon signal arrival and the dispatching should be handled
solely by the entry point.
Issue #1738
* use '_dma_ext' or '_fdpma' commands
* handle interrupts depending on mode of operation
* spelling fixes
* move ATA 'Idendity' struct to ata header
issue #1734
- we claim to have no limits on file handles and number of threads
- remove obsolete Thread_base::myself fall-back code for stack size calculation
Issue #1733.
Too less memory quota for a PD may be calculated, which leads to too early
punishment for a Genode process.
Discovered during Turmvilla scenario #1552 and issue #1733.
Additionally print warnings about unavailable CPUs if they are tried to be
used during pager object setup.
Discovered during Turmvilla scenario #1552 and issue #1733.
threads with prio 0 will not be started and would fail silently.
Happened on Turmvilla for the USBProxy thread in virtualbox.
Discovered during Turmvilla scenario #1552 and issue #1733.
Reduces kernel log message noise when running on kernel-debug branch.
Additionally add a more verbose core message.
Discovered during Turmvilla scenario #1552 and issue #1733.
Under some circumstances, the diagnostic message in the exception signal
handler was not printed. This could happen due to a dead lock in the
console library if the console code itself produces the exception while
possessing the mutex, e.g., by exhausting a undersized stack. Now, we
directly write to the log session via the stdout_write() hook or use
raw_write_str() in core.
This patch improves the decorator in two ways. First, it enables the
assignment of window colors depending on the window labels. This
configuration can be changed dynamically. Second, it adds the handling
of window controls for closing, maximizing, minimizing windows.
Issue #1689Fixes#1688
This patch supplements the existing focus reports with the new attribute
'active', which indicates recent user activity when set to "yes". This
information is consumed by the clipboard to dynamically adjust its
information-flow policy depending on the user activity.
Issue #1712
This patch moves the formerly internal classes of the report-ROM service
to the public location os/include/report_rom/ so that they can be reused
by other components such as the upcoming clipboard.
This overload of the value member eases the retrieval of Genode::String
objects from XML attributes. So we won't need to deal with C-style
character buffers anymore.
The utilities in os/session_policy.h used to be tailored for the
matching of session arguments against a server-side policy
configuration. However, the policy-matching part is useful in other
situations, too. This patch removes the tight coupling with the
session-argument parsing (via Arg_string) and the hard-wired use of
'Genode::config()'.
To make the utilities more versatile, the 'Session_label' has become a
'Genode::String' (at the time when we originally introduced the
'Session_label', there was no 'Genode::String'). The parsing of the
session arguments happens in the constructor of this special 'String'.
The constructor of 'Session_policy' now takes a 'Genode::String' as
argument. So it can be used with the 'Session_label' but also with other
'String' types. Furthermore, the implicit use of 'Genode::config()' can
be overridden by explicitly specifying the config node as an argument.
Defer destruction of threads which tries to self-destruct. Check an perform
cleanup of such threads during pthread_cancel and pthread_create.
Issue #1687
Until now, the CLI monitor and the laucher allowed the user to explitly
kill subsystems but both used to ignore gracefully exiting subsystems.
It was the user's job to remove the remains of those subsystems. The
patch takes the burden of manually killing exited subsystems from the
user.
Fixes#1685
Instead of white-listing floppy controllers, certain SCSI controllers
as well as ISAPnP etc. pp. remove the diagnostics and print each access
if verbose is set.
Fixes#1726.
Instead of using the alarm_timer thread we use our own timer thread
that uses a kernel semaphore on Nova. On all other platforms a timer
connection and trigger_once is used.
Fixes#1727.
Addressing must be PC-relative, so adapt the approach from the other
nova_x86_32 syscall bindings (description by @ssumpf):
Use call to push the current IP on the stack and add the distance of
label 0 and label 1 in order to determine the return address, which
NOVA requires in edx.
The bug only showed up with "-O0" in libc.lib.so in form of a unwanted
text relocation.
Fixes#1721
platform_execute() is used to initially switch the stack of a
routine/task. While Thread_base::alloc_secondary_stack() properly aligns
the returned stack pointer the x86_64 assembler implementation did not
comply to stack frame management specified in the ABI.
The used (and most simple) stack-alignment check may pass a float to a
varargs function on x86, which requires the compiler to properly save
some XMM registers on stack.
Dataspace components inherit from RPC objects which are non-copyable from now
on. Therefore, the Rom_session_component's constructor had to be modified
to not construct a dataspace component on the stack and assign it in the
following.
Ref #1704
Holding the object pool's lock while trying to obtain an object's lock
can leave to dead-lock situations, when more than one thread tries to
access multiple objects at once (e.g.: when transfer_quota gets called
simultanously by the init and entrypoint thread in core). To circumvent
holding the object pool lock too long, but access object pointers safely
on the other hand, this commit updates the object pool implementation
to use weak pointers during the object retrieval.
Fix#1704
Destroying an object within the scope of a lambda/functor executed
in the object pool's apply function leads potentially to memory corruption.
Within the scope the corresponding object is locked and unlocked when
leaving the scope. Therefore, it is illegal to free the object's memory meanwhile.
This commit eliminates several places in core that destroyed wrongly in
the object pool's scope.
Fix#1713
If a client provides a read buffer of insufficient size for all
available data, we have two options
1) Leave it to the client to do partial reads until not further data is
available, or
2) Signal the client that there still some bytes on a partial read.
As the second option seems more robust it's implemented in this commit.
Fixes#1705
* Move the Synced_interface from os -> base
* Align the naming of "synchronized" helpers to "Synced_*"
* Move Synced_range_allocator to core's private headers
* Remove the raw() and lock() members from Synced_allocator and
Synced_range_allocator, and re-use the Synced_interface for them
* Make core's Mapped_mem_allocator a friend class of Synced_range_allocator
to enable the needed "unsafe" access of its physical and virtual allocators
Fix#1697
The commit consumes the argument of a unsupported printf command.
Without the commit - a subsequent command uses the argument of the preceding
command, which may cause memory corruption or page faults for sequences using
string commands, e.g.
Genode::printf("%#x %s\n", 0x20, "Test");
'#' is not supported by Genode::printf. In this scenario a pagefault at
address 0x20 is caused.
Fixes#1701
The 'O_NONBLOCK' flag has different numerical values in lwip and in the
libc, which prevented the correct setting of nonblocking socket mode.
Fixes#1699
The intention of Packet_ref was to allow clients to place opaque
references into the packet descriptor itself, which could be observed on
packet completion. Currently no component in our sources uses this
feature and beyond that it is questionable if it should be used at all:
If the server tampers with the ref the client may easily be confused
into observing an incorrect or invalid context. It seems better to
remove the opaque context from the descriptor and leave the actual
implementation to the client and its needs.
Unfortunately, the 'gcc -dumpmachine' magic does not suffice on all
Linux distros, so we just add the well-known paths for i386-linux-gnu
and x86_64-linux-gnu.
Fixes#1694
This patch extends the configuration concept of init with an additional
sub node for the <start> node:
<start name="noux">
<exit propagate="yes"/>
...
</start>
If the 'propagate' attribute is set to "yes", the exit of the respective
child will appear to init's parent as the exit of the entire init
subsystem.
Fixes#1686
Instead of holding SPEC-variable dependent files and directories inline
within the repository structure, move them into 'spec' subdirectories
at the corresponding levels, e.g.:
repos/base/include/spec
repos/base/mk/spec
repos/base/lib/mk/spec
repos/base/src/core/spec
...
Moreover, this commit removes the 'platform' directories. That term was
used in an overloaded sense. All SPEC-relative 'platform' directories are
now named 'spec'. Other files, like for instance those related to the
kernel/architecture specific startup library, where moved from 'platform'
directories to explicit, more meaningful places like e.g.: 'src/lib/startup'.
Fix#1673
To correctly delete all IPC gates created via a CAP session, all
capabilities created have to be stored. Otherwise we leak kernel
objects within Fiasco.OC permanently.
Fix#702
This scripts starts two Audio_out session clients. These clients
access the soundcard via the mixer. The first client simply streams
a sample file in a loop while the second client generates a click
sound when any key is pressed.
Issue #1666.
Sometimes, the play position in stream is behind the out stream, mostly
because of timing issue. In this case, the mixer will produce invalid
packets which in return will lead to looping on an invalid packet in
the audio_drv.
Issue #1666.
Instead of looping the whole queue, the driver now loops on the first
invalid packet. In any case it will send a progress signal to its
client.
Fixes#1666.
For some platforms (at least hw_zynq on Qemu), the measured time of the
periodic timeout test exceeded the maximum that was previously
calculated without any tolerance. Most likely, this is not a malfunction
of the test subject as the error is pretty small and, of course,
measuring the time produces overhead itself. Introducing a tolerance of
only 0.1% fixes the problem.
Fixes#1599
Instead of returning pointers to locked objects via a lookup function,
the new object pool implementation restricts object access to
functors resp. lambda expressions that are applied to the objects
within the pool itself.
Fix#884Fix#1658
Propagating the user context-pointer from C++ code to the mode
transition assembly doesn't touch any CPU global data. Thus, we can
reduce the in-sync window.
Fixes#1223
Other platforms implement Kernel::Cpu_context stuff in
kernel/cpu_context.cc. On x86_64, it was implemented in
kernel/thread.cc. The commit fixes this inconsistency to the other
platforms.
Ref #1652
The distinction between Kernel::Thread and Kernel::Thread_base is
unnecessary as currently all Hw platforms would have the same content in
the latter class. Thus I've merged Kernel::Thread_base into
Kernel::Thread. Thereby, Kernel::Thread_event can be moved to
kernel/thread.h.
Ref #1652
The Muen-specific PIC implementation provides the irq_occurred()
function which is used to register an IRQ with the PIC upon thread
exception.
The occurred IRQs are stored in a boolean array internally and handed
out to a CPU via take_request().
The driver uses the timer page containing a vector and timer value to
implement the start_one_shot() and value() functions. The timer value
designates the absolute tick count of the next event.
The address of the time page is acquired using the get_memregion_info
Sinfo API function.
The Muen Sinfo API is used to retrieve information about the execution
environment of a subject running on the Muen Separation Kernel.
While the C++ API is defined in sinfo.h, musinfo.h specifies the
internal format of the information stored in the Sinfo pages provided by
the Muen SK. It is a copy of the file contained in the libmusinfo
library of the Muen project. That is the reason why the coding style in
this file differs from the official style.
Move Platform::setup_irq_mode function from x86 platform_support.cc to
x86_64 specific file. This will enable the upcoming x86_64_muen platform
to provide a separate implementation.
The hw_x86_64_muen platform is a x86/64 base-hw kernel which runs as
isolated subject (guest) on the Muen Separation Kernel (SK) [1].
The platform is implemented as an extension to hw_x86_64 replacing the
PIC and timer drivers with paravirtualized variants. The skeleton
contains a dummy PIC and timer implementation for now.
[1] - http://muen.sk
If the guest is not in an interruptible state when the recall handler is
called, an assertion fails. Since the assertion is only relevant if the
recall handler was called during IRQ injection, it should be moved into
the corresponding conditional block which already has the assertion for
the 'IF' flag.
Fixes#1661
By default, the EMT thread of the last vCPU handles expired timers. When
running VirtualBox with 2 vCPUs, it sporadically happens that the EMT
thread of the second CPU clears an 'interrupt pending' flag for the first
vCPU after changing the state of a timer device model, which is not
expected by our Genode-specific code (failed assertion '!_irq_win' in the
recall handler).
The problem did not occur yet when letting the EMT thread of the first
vCPU handle the expired timers, which is done by this commit as an interim
fix until the problem has been further investigated.
Issue #1660
Add spin loop hint by means of the PAUSE instruction since
wait_for_interrupt is called in a busy loop. This should improve processor
performance and reduce power consumption.
Note: HLT cannot be used since it is a privileged instruction and the idle
thread is executed in userspace.
Move the _core_only_mmio_regions function to the
x86_64/platform_support.cc file. This is required to make it overridable
for other platforms deriving from x86.
If a requested report already exists the request is denied with
Invalid_args.
Further, I dusted the report_rom test and added it to the
autopilot list.
There are currently some issue with the mixing/filtering code of vbox.
So instead of using the audio subsystem to do filtering and mixing we
bypass it to get better audio qualitiy. That means that the device
model of the VM has to use the same sample rate as the Audio_out/in
sessions, however.
Issue #1647.
With this commit preliminary audio support in VirtualBox is enabled.
The backend supports playback as well as recording sounds from within
a guest VM. Depending on how the guest configures the device model
the audio output may sound disorted. If the guest uses buffers that
are too small, i.e., 10 ms or less, frequent buffer underruns will
occure.
To get this low-latency one has also to increase vbox' update hz
to 200 (i.e., 5ms).
Fixes#1647.
When a stream was stopped it may still contain valid packets that
will be played automatically when the stream is started again. The
invalidate_all() method may be called after stopping the stream to
prevent this.
Issue #1647.
Run script depending on VFS plugins (i.e., shared objects) like
vfs_jitterentropy.lib.so have to state this dependency rather the actual
binaries linked against libc. The latter introduces a library dependency
that is just not there. For example, the dependency on vfs_jitterentropy
is a result from the config node for libc which automatically loads the
plugin.
The alarm library failed to handle the case properly where an already
scheduled alarm gets rescheduled before it triggered. Even though the
attempt to reschedule the alarm (twice insertion into alarm queue) was
detected, this condition resulted in the mere modification of the
alarm's parameters while keeping the alarm's queue position unchanged.
This, in turn, may violate the invariant that all enqueued alarm objects
are strictly ordered by their deadlines. The patch handles the case by
dequeuing the alarm object before reinserting it into the queue at the
right position.
Fixes#1646
With the introducation of the Audio_in session interface it makes
sense to rename the current available audio drivers. At the moment
only the dde_bsd audio_drv supports Audio_out as well as Audio_in.
The Linux audio_drv only supports Audio_out (there is no demand for
Audio_in support currently) but is renamed nonetheless to make it
easiert to write generic run scripts.
Issue #1644.
The driver is now able to record audio samples. In contrast
to playback it has to be enabled explicitly by setting the
configuration attribute 'recording' to 'yes'. Playback is by
default enabled but may be disabled by setting 'playback' to
'no'. Furthermore it is now possible to configure the mixer
from the configuration. For now, the interface used by vanilla
OpenBSD is just exported.
The following snippet shows how to enable and configure recording
on an Thinkpad X220 where the headset rather than the internal
mic is used as recording source:
! <start name="audio_out_drv">
! <resource name="RAM" quantum="8M"/>
! <provides>
! <service name="Audio_out"/>
! <service name="Audio_in"/>
! </provides>
! <config recording="yes">
! <mixer field="outputs.master" value="255"/>
! <mixer field="record.adc-0:1_source" value="sel2"/>
! <mixer field="record.adc-0:1" value="255"/>
! </config>
! </start>
In addition to selecting the recording source the playback as
well as the recording volume are set to 255 (maximum).
Information about the available mixers and settings in general
may be obtained by setting the 'verbose' to 'yes' in the config
node.
Issue #1644.
Unfortunatly, there is no support for any HDMI/DP based HDA codecs in
this driver. Therefore we try to filter out known devices (normally the
PCI device on 00:03.00). This could also be done in the platform_drv's
configuration by explicitly naming the BDF but for better or worse that
will not work when using a wildcard class like HDAUDIO which is done in
generic run scripts.
Issue #1644.
In line with the Audio_out session a Audio_in session is used to
record audio frames. Like in the Audio_out session shared memory
in form of the Audio_in::Stream is used to transport the frames
from the server to the client. These frames consist of single
channel (mono) samples. An Audio_in::Packet always contains a full
period of frames.
A Audio_in server captures frames and puts them into the
Audio_in::Stream. To do so the server allocates a Audio_in::Packet
from the packet queue embedded in the Audio_in::Stream. If the queue
is already full, the server will override packets and notify the
client by submitting the 'overrun' signal. The client has to cope
with this situation, e.g., by saving packets more frequently.
A client will also receive a 'progress' signal from the server when
a new Audio_in::Packet was submitted to the packet queue.
Fixes#1644.
To archive lower latency the length of a period was reduced from
2048 (~46ms) to 512 (~11.6ms) samples.
It should be noted that this change probably breaks audio in Qemu on
most systems.
Issue #1644.
For most platforms except of NOVA a distinction between pager entrypoint
and pager activation is not needed, and only exists due to historical
reasons. Moreover, the pager thread's execution path is almost identical
between most platforms excluding NOVA, HW, and Fisco.OC. Therefore,
this commit unifies the pager loop for the other platforms, and removes
the pager activation class.
This exit handler is called by the NOVA kernel now when the VM uses PAE
with nested paging and the PDPTE registers need to get updated. With this
commit, an error message is printed if this situation occurs.
Fixes#1640
The reference count get increase to use 2 bytes, so we need the double amount
of selectors as before.
Additionally print a message if we run out of capabilities in a server. Since
our rpc framework is now clever enough to detect that for a printf we don't
need to setup a receive window, we may use a printf instead of a die call.
Eases debugging.
Issue #1601
Showcasing the out of memory kernel issue.
One test triggers oom during memory delegation when talking to core pager
thread. Two other test trigger oom during capability delegation in a
server/client scenario for send and reply phase separately.
Issue #1601
Move FS Node implementations from server/ram_fs to include/ram_fs.
Support embedded ram_fs instances in VFS configurations using <ram/>.
Add 'no space' handling to VFS symlink ops.
Fixes#1635
Allow symlinks to be passed to the read and write file system utilities.
Disallow writes to symlinks with offsets in file system servers, this is
to ensure that writing the target of a symlink is an atomic operation.
Fixes#1604
Increase internal chunk size of heap only if an allocation succeeded
beforehand. Otherwise the chunk size increases with every unsuccessful
invocation and a upgrade of the used ram session will be insufficient and of
no use at all.
Fixes#1632
If some sessions run out of memory in init, resource requests will be issued
to core, which it never will satisfy. Setting some default signal handler
avoids that the default implementation will block init for ever.
Issue #1632
Moves the Bios Data Area header from base-hw to base. Modifies the
base-nova core console that it uses the header as replacement for
the previous BDA bit logic.
Ref #1625
Introduces a class Unmanaged_singleton_constructor that can be declared as
friend to be able to call unmanaged_singleton on classes with a private
constructor. Enables the appliance of the singleton pattern.
Ref #1625
Three things were done:
* Timouts are measured in an asynchronous way to be able to start counters
after the potentially expensive RPC that starts the timeout.
* Timeouts were increased from 45 and 15 seconds to 60 and 20 seconds
because at least on Arndale, results were not stable enough.
* Counting is done on 'unsigned long long' instead of 'unsigned' because
with the higher timeouts, overflows occured.
Fixes#1628
The timer driver previously used floating point operations to translate us to
tics and vice versa. This isn't necessary as the rounding error isn't critical
for the given values but expensive which should be avoided in a code path that
must be executed pretty frequent with high priority.
Ref #1628
This commit eliminates the mutual interlaced taking of destruction lock,
list lock and weak pointer locks that could lead to a dead-lock situation
when a lock pointer was tried to construct while a weak object is in
destruction progress.
Now, all weak pointers are invalidated and dequeued at the very
beginning of the weak object's destruction. Moreover, before a weak pointer
gets invalidated during destruction of a weak object, it gets dequeued, and
the list lock is freed again to avoid the former dead-lock.
Fix#1607
Up to now it was not possible to trace threads that use a different
Cpu_session rather than env()->cpu_session() (as done by VirtualBox).
This problem is now solved by setting the Cpu_session explicitly when
creating the event logger and attaching the trace control area when
creating the thread.
Fixes#1618.
The timer driver on X86 needs CPU quota with highest priority as it
frequently has to interrupt the counters to update the PIT.
On ARM this makes no difference in the test results as ARM timer
drivers, once configured, can sleep until the end of the timeouts.
On X86 we raise the error tolerance to 2% (default 1%) to compensate
the error caused by the timer.
Fixes#1621
Printing all errors and the goal values instead of exiting at the first
error allows for faster analysis of problems with the CPU-quota
mechanism.
Ref #1616
The test always succeeded because I forgot to set the error tolerance from
my debugging value 1 back to the correct value 0.01 before commiting the
test.
Ref #1616
Since the HW-kern-caps commit, there was a bug in the Platform_thread
constructor. When called for a user thread, the constructor stated 0
as CPU quota at the Kernel_object instead of its quota input-paramater.
Fixes#1620
- free up kernel memory of empty slabs (if already one empty slab is in
place)
- free up more page table entries
- handle CPUs with invariant TSCs gracefully
Genode/Nova running on CPUs without the invariant TSC feature may seem
to 'hang'. The referenced commit of the nova branch fixes the issue
for some older Intel CPUs.
Fixes#1615
Adjust bomb to specify the various hard-coded parameters and set up bomb.run
this way that it manages at our test machine to succeed in the given time.
Issue #1615
Bomb and any server may generate references to capabilities exceeding 256 -
use a 16bit counter until the cap handling in Genode gets unified.
Additionally try to print a warning, instead of dying, if we get cap reference
count under or overflow.
Issue #1615
Do not use slabs for allocations above 64KB, this seems to lead to memory
corruptions and the error described in issue #1613 under certain circumstances.
fixes#1613
Add a test where a locked pointer shall be taken during object destruction.
Moreover, extend the run-script so it runs on different platforms with
"real" timers.
SDL uses the Audio_out session in streaming fashion. For this reason
the audio might be played with delay of at most the queue size. To
mitigate the effect we synchronize the tail pointer to the current play
pointer when the PlayAudio() function is called by SDL for the first
time.
Fixes#1612.
Init used to specify the unique child name as session label when
requesting the binary image of a dynamically linked child. The actual
module name was propagated as "filename" session argument. Since we want
to move towards the sole use of the session label, which can be taken
into account for the session routing, the module name should always be
the last part of a ROM session label.
This patch changes the window manager, the decorator, and the
floating window layouter to propagate the usage of an alpha channel from
the client application to the decorator. This way, the decorator can
paint the decoration elements behind the affected windows, which would
otherwise be skipped.
This patch adds two new painters located at gems/include/polygon_gfx.
Both painters draw convex polygons with an arbirary number of points.
The shaded-polygon painter interpolates the color and alpha values
whereas the textured-polygon painter applies a texture to the polygon.
The painters are accompanied by simplistic 3D routines located at
gems/include/nano3d/ and a corresponding example (gems/run/nano3d.run).
This patch changes the way how CLI monitor obtains its subsystem
configurations. Originally, this information was provided via the
Genode::config mechanism. But for managing complex scenarios, the config
node becomes very complex. Hence, it is preferrable to have a distinct
file for each subsystem configuration.
The CLI monitor scans the directory '/subsystems' for files ending with
".subsystem". Each file has the same syntax as the formerly used
subsystem nodes.
Instead of using the Genode user-level signal API to signal page-faults to
a page-fault handler, use the kernel API directly. Thereby the accounting
of signal contexts needed for each paging subject can be done easily.
Fix#956
Moreover, be strict when calculating the page-table requirements of
core, which is architecture specific, and declare the virtual memory
requirements of core architecture-wise.
Ref #1588
We set 'ld -z max-page-size' to 4KiB to prevent the linker from aligning
the text segment to any built-in default (e.g., 4MiB on x86_64 or 64KiB
on ARM). Otherwise, the padding bytes are wasted at the beginning of the
final binary.
Removed the Nic::Driver implementation. All nic servers now inherit from
Nic::Session_component. Packet stream signals are dispatched to
the 'handle_packet_stream' function within a session component. Thus, nic
servers now have direct access to the packet stream channels, making handling
more flexible.
Adjusted nic_loobpack, dde_ipxe, wifi, usb, lan9118, Linux nic, and OpenVPN to
the new interface.
Fixes#1602
The ~Irq_session_component relied on the IRQ number obtained by the
corresponding kernel IRQ object to mark the IRQ as free at the IRQ
allocator. However, since the kernel IRQ object is initialized not
before the 'sigh' function is called, the IRQ of sessions that
never called 'sigh' could not be freed correctly. This patch fixes
the problem by not relying on the kernel IRQ object for obtaining
the number in the destructor but using the '_irq_number' member
variable instead.
Use printf format specifier with correct size to log error code which is
if type uint32_t. Also print the error code in hex since this simplifies
lookup as the error values are also defined as hexadecimal values, see
[1].
Fixes#1600
[1] - repos/ports/src/virtualbox/include/xpcom/nsError.h
Instead of organizing page tables within slab blocks and allocating such
blocks dynamically on demand, replace the page table allocator with a
simple, static alternative. The new page table allocator is dimensioned
at compile-time. When a PD runs out of page-tables, we simply flush its
current mappings, and re-use the freed tables. The only exception is
core/kernel that should not produce any page faults. Thereby it has to
be ensured that core has enough page tables to populate it's virtual
memory.
A positive side-effect of this static approach is that the accounting
of memory used for page-tables is now possible again. In the dynamic case
there was no protocol existent that solved the problem of donating memory
to core during a page fault.
Fix#1588
Unregister callbacks, so rx packets will not be propated to the deleteted
'Driver' object. Initialize ipxe once in the 'Main' object, thus allowing new
session connections.
Fixes#1595
With the server framework this becomes unnecessary. Also when the 'platform_drv'
has a lower priority, signaling will cause a constant load that starves the
'platform_drv'.
Fixes#1594
The recent change of the TRACE session interface triggered the
following warning:
/home/no/src/genode/repos/base/include/base/ipc.h:79:4: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
*reinterpret_cast<T *>(&_sndbuf[_write_offset]) = value;
^
In file included from /home/no/src/genode/repos/base/src/core/include/trace/session_component.h:19:0,
from /home/no/src/genode/repos/base/src/core/trace_session_component.cc:15:
/home/no/src/genode/repos/base/include/base/rpc_server.h:132:42: note: ‘ret’ was declared here
typename This_rpc_function::Ret_type ret;
The warning occurs for basic return types (like size_t), which are
indeed not initialized. The variable gets its value assigned by the
corresponding 'call_member' overload, to which the variable is passed as
reference. But the compiler apparently is not able to detect this assignment.
Declaring 'ret' with a C++11-style default initializer fixes the warning.
While importing trace sources as trace subjects into a TRACE session,
the session quota might become depleted. The TRACE session already keeps
track of the session quota via an allocator guard but the 'subjects' RPC
function missed to handle the out-of-memory condition. This patch
reflects the error condition as an 'Out_of_metadata' exception to the
TRACE client. It also contains an extension of the trace test to
exercise the corner case.
This patch enable clients of core's TRACE service to obtain the
execution times of trace subjects (i.e., threads). The execution time is
delivered as part of the 'Subject_info' structure.
Right now, the feature is available solely on NOVA. On all other base
platforms, the returned execution times are 0.
Issue #813
This patch bases the size of the destination buffer in
'Init::Child_policy_redirect_rom_file' on the maximum label size
instead of the filename size. Otherwise, the use of a long configfile
name (i.e., "trace_subject_reporter.config") in combination with a long
child name ("trace_subject_reporter") would result in a truncated label
string.
When replacing a report with a smaller one, the corresponding ROM
dataspace should not contain any traces of the old report. Otherwise,
the consumer of the ROM dataspace may mistake the stale content as
meaningful information. This is particularly annoying when manually
inspecting reports. This patch overwrites the stale content with zeros.
By appending a newline to the generated XML data, we prevent the output
from messing with the command prompt when using 'cat' on a shell.
Futhermore, when using line-buffered output, the trailing newline
ensures that the output gets gets properly flushed.
