On Fujitsu S936, evaluating the _BIF method on each battery-info update
successively increased the RAM usage, while _BST (dynamic battery
status) and _STA (generic status) did not show this behavior. Therefore
this commit retrieves only dynamic information periodically (resp. on
SCI IRQ). Now, acpica hast static RAM usage in idle state for 24+ hours.
The root cause for the increased RAM usage is still shady. While it
could just be normal that it grows until a certain yet unknown limit,
there may also be memory leak in contrib code or some strange AML on the
designated notebook.
Issue #3454
This mode is used on Linux (if acpi=strict is not set on boot cmdline)
and Windows. The mode ignores certain errors and/or bad AML constructs.
1) Allow "implicit return" of last value in a control method
2) Allow access beyond the end of an operation region
3) Allow access to uninitialized locals/args (auto-init to integer 0)
4) Allow ANY object type to be a source operand for the Store() operator
5) Allow unresolved references (invalid target name) in package objects
6) Enable warning messages for behavior that is not ACPI spec compliant
Whether an SoC has the multiprocessing extensions can be read out
from the identification registers, and does not need to be specified
in each board header.
Ref #3445
The rtc_drv on x86 can now by used to also set the RTC. If the config
attribute 'allow_setting_rtc' is set to 'yes' the driver will update
the RTC from the content of the 'set-rtc' ROM module. A valid ROM must
contain a top node with the following attributes: 'year', 'month',
'day', 'hour', 'minute' and 'second'.
* Only rudimentary checking of the provided values is done.
* '12H' mode is not supported.
Fixes#3438.
This commit implements the ssh exec channel request. It also handles
some shortcommings on the interactive channel like exit and concurrent
session establishments.
Pipes into the channel do not work yet. E.g.:
echo foobar | ssh noux@localhost -p 5555 "cat > /rw/test.txt"
The issue described with FIXME in Ssh::Server::incoming_connection()
could not be reproduced and might have been fixed with the improved
file descriptor handling.
Fixes#3401
To enable the clipboard for a VM, add the following node to the
<Hardware> sub node of your machine.vbox configuration:
<Clipboard mode="Bidirectional"/>
Issue #3437
The triggering of a new depot query can happen more than once per
activation of the sculpt manager if multiple conditions call for updated
information about the depot. When this happens, the depot-query
component produces intermediate results, which are not consumed by the
sculpt manager. By deferring depot queries for a few milliseconds, we
avoid such intermediate queries, relieving the workload of the
depot-query component at system boot time.
Issue #3436
The diagnostic messages presented in the runtime dialog lacked the name
if the subsystem was created from a launcher, e.g., the 'vm'. Instead of
determining the subsystem name from the start-XML-node (a launcher has
no 'name' attribute but the name corresponds to the launcher's file
name), the name is now passed as a dedicated argument.
This patch enhances the noux_vim.run scenario to make it usable as a
testing ground of the terminal's and window manager's resize and
clipboard handling.
Issue #2079
The labels of clipboard ROM and clipboard report sessions of WM clients
must be consistent with the client's nitpicker label. Hence, we must
route those sessions through the window manager, analogously to the
approach taken for shape reports in #3165.
Issue #3437
When setting the config attribute 'match_labels="yes"', the clipboard
performs plausibility checks for copy and paste operations against the
nitpicker focus.
Issue #3437
The warning falsely detected cases where shared objects where loaded before
exec_static_constructors() was called as unneeded even in cases were the
binary itself contained static globals.
The commit also removes one redundant call to exec_static_constructors()
from the block tester.
This patch introduces two caches to the depot-query tool.
- A stat cache remembers the results of 'Directory::file_exists'
calls.
- The 'Cached_rom_query' caches the result of scanning the depot
for a given ROM module and pkg path. To elminates the need to
parse 'archive' files of pkgs referenced from other pkgs or
for the repeated instantation of the same pkg.
Both caches are bypassed whenever referring to the 'local' depot user.
Fixes#3427
When resizing windows of clients that respond very slowly to resize
requests, the window's size sometimes snapped back to its original size
immediately after finishing the drag operation.
The problem was caused by the interplay of the layout rules (obtained
via the 'rules' ROM, generated by the 'rules' report) and the
temporary interactive state that occurs during drag operations.
The rules are updated only at the time of releasing the button to keep
the overhead while dragging the window low. However, when releasing the
mouse, the (now outdated) rules kicked back into effect, triggering
resize requests for the window to its old size.
The patch solves this problem by decoupling the dragged state of a
window from the physical release of the button. The button release
triggers a transition from a DRAGGING to a SETTLING state and programs
a timer. In the SETTLING state, the windows behave as in DRAGGING state,
giving the interactive geometry precedence over the rules-dictated
geometry. During this state, further responses of window-resize requests
may come in and are handled like dragging was still in progress. After a
timeout, however, the current window layout is conserved as a new rules
report and the state goes back to IDLE.
For clients that takes a very long time (in particular, VirtualBox when
resizing the desktop, which takes sometimes multiple seconds), the
snap-back artifact can still occur, but the effect is reduced.
This problem surfaced with the new tool chain that changes the stack
layout. A pointer to the the config XML data was kept in the main object
but pointed to a stack variable. This patch fixes it by removing the
pointer.
Fixes#3416
This is a follow-up commit to the libc update. The FreeBSD
implementation of sigset or sigaction calls the __libc_sigaction now.
The patch fixes the SIGWINCH handling for Vim when interactively
resizing the terminal window.
Fixes#3424
- make port able to be prepared repeatedly
Rpcgen refuses to overwrite an already existing header, so try to
always remove it beforehand
- get rid of 'cp' warning 'cp: warning: source file
'src/lib/libc/sys/sys/time.h' specified more than once'
- silence patch message 'patch unexpectedly ends in middle of line'
Fixes#3420.
This patch adds the missing propagation of the maximized state from the
layout rules to the internal representation of a window. Without this
patch this state could be toggled by clicking on the maximizer button
only.
The decorator's detection of the hovered window element was inaccurate,
which resulted in "jumping" windows in some situations, ultimately
caused by a combination of three different mechanisms.
First, when moving the pointer into the area of a window, the decorator
would detect the hovering of the left border whenever the distance of
the pointer from the border was less than the half of the theme texture
(e.g., 64x64 pixels for the default theme). However, if the left border
margin is set to a small value (e.g., 1), there is an overlap of the
sensitive resize border area and the content. Hence, chances were quite
high that - when moving the pointer from the left into the window - the
hover report would contain the hovering of the left border.
Second, the window manager tries to hide pointer movements from the
decorator if possible. It informs the decorator of the pointer position
if any decoration is hovered or if a new window is hovered. But it does
not expose pointer movements within a window to the decorator. For this
reason, the decorator would not update the hover report as long as the
pointer stays within a once hovered window. In the situation described
above, the hover report would still contain the stale information about
the hovering of the left resize border.
Third, when the user clicks on the window, the decorator examines the
most recent hover report and - in the situation described above - finds
the left border hovered. Consequently, it initiates a window-drag
operation. While resizing the window with the left border, the window
layouter pins the right border of the window to its current position.
All window-size changes of the client will be applied towards the left
(dragged) border. In the case of the top view, which continuously
resizes the window by itself, the window would "jump". In reality, it
actually tries to respond an interactive resize operation. The window
layouter cannot guess that the client is not responding to window
layouter's resize request but is acting independently.
This patch fixes the jumping window problem for the case where the
pointer hovers the overlapping area of the resize border and the
content. However, when trying the to interactively resize the top window
via the bottom-left corner, the "jumping" can still be observed.
Fixes#3303
By decoupling the leitzentrale from the (contended) boot CPU, the fading
on F12 interferes much less with animations like nano3d deployed in the
runtime.
Fixes#3268
In the past, the core-only privileged syscall `update_pd` was used only
to invalidate the TLB after removal of page-table entries.
By now, the whole TLB at least for one protection domain got invalidated,
but in preparation for optimization and upcomingARM v8 support,
it is necessary to deliver the virtual memory region that needs to get
invalidated. Moreover, the name of the call shall represent explicitely
that it is used to invalidate the TLB.
Ref #3405
There are still nightly tests like test-tcp_bulk_lxip on sel4 x86_64 qemu
that manage to hit the test timeout of the run script although the test was
successful. So, raise the extra time added by the run script to 30 seconds.
Ref #3411
Some platforms (sel4 imx6/imx7) cannot manage to execute all tests in a single
boot. Thus, we re-boot them periodically after a given maximum number of tests
to avoid that arbitrary tests always fail due to the long uptime and not due to
the tests themselves.
If the maximum number of tests is set to 0, no limit is applied.
Fixes#3411
If a path element cannot be watched because it does not exist yet, the next
available parent directory is watched to detect the creation of the missing
path element. If a missing path element got created just between the failed
watch request for the element and the successful watch request for its parent
directory, the creation of the path element could remain unnoticed.
With this commit, 'fs_rom' tries to watch a path element again if the watch
request for its parent directory was successful.
Fixes#3398
The lazy-timer test depends on the faster-timer handler to be executed
before the fast timeout occurs, which was pretty hard to achieve on Qemu
and a busy host machine. Therefore, I increased the fast-to-faster
timeout ratio from 50/25 ms to 200/25 ms and set the test runtime to
4000 ms.
Move the _vfs_sync implementation from vfs_plugin.h to vfs_plugin.cc and
wrap all VFS access in the VFS_THREAD_SAFE macro.
Syncing must be made thread safe because it often happens when closing
files and may require suspending the current thread for I/O signal
dispatching.
Ref #3409
- use priorities solely with nova
- handle exceptions during vCPU creation
- avoid assertion in vga_vbda
- silence compiler warnings about outdated register keyword
Issue #3111
The terminal now got a configurable palette for 16 colors (8 normal, 8
bright/bold).
<config>
<palette>
<color index="0" value="#000000"/> <!-- black is real black -->
<color index="8" value="#101010"/> <!-- bright black stands out a bit -->
</palette>
</config>
Note, the old (undocumented) <color index="..." bg="..."> configuration
scheme is no longer supported.
Also, this commit adds a pleasing default palette that ensures
readability of ViM's standard hightlighting.
Fixes#3406
Instead of hosting our outdated own fork, this commit now uses kernkonzept's
nowadays available github source repositories. This hopefully simplifies
updates, or cherry-picking single fixes.
* isatty
For the moment it is not possible to determine if the fd belongs to a
tty. For whatever reasons, the check is done multiple times, e.g.
'tclsh', which will spam the LOG.
* sysctl(HW_FLOATINGPT)
FPU is enabled on all our platforms, so return true.
Fixes#3389.
Start and stop the DHCP state machine as the Nic link-state changes.
Invoke the link state handler during configuration rather than assume
that in the case of a downed link lwIP will defer DHCP until the link
comes up.
Additionally, support static DNS configuration via the "nameserver"
configuration attribute.
Fix#3388
It might happen, in CPU intensive tests (like TCP bulk lxip), or when
printing debugging output after a failed test (as done currently on
staging), that the run script on the host gives up and reboots the
platform too early. Thus, we raise the buffer time. A reboot should
be necessary only in rare cases anyway.
Fixes#3387
On muen, we don't have configured access to wifi so far. Thus, the wifi
driver doesn't come up and we should skip tests using this driver for
the platform.
Fix#3384
On x86 the CPU count is determined through ACPI's MADT by counting the
local APICs reported there. Some platforms report more APICs
than there are actual CPUs. These might be physically disabled CPUs.
Therefore, a check if the LAPIC is actually physically enabled in
hardware fixes this issue.
Thanks to Alex Boettcher
fixes#3376
Fix initial stack pointer alignment for x86_64 in crt0.s startup code of
bootstrap. SysV ABI states that upon function entry (rsp + 8) % 16 = 0.
There, we have to align the stack to 16 bytes before all 'call'
instruction not 8. Otherwise FPU (GP) exception might be raised later on
because of unaligned FPU accesses.
issue #3365
Since gcc 8.3.0 generates SSE instructions into kernel code, the
kernel itself may raise FPU exceptions and/or corrupt user level FPU
contexts thereby. Both things are not feasible, and therefore, lazy FPU
switching becomes a no go for base-hw because we cannot avoid FPU
instructions because of the entanglement of base-hw, base, and the tool
chain (libgcc_eh.a).
issue #3365
This removes implementations of and also references to anonymous new and
delete operators from the libc implementation. As allocators for
new/delete Libc::Allocator instances are used, which (paradoxically) map
to libc malloc/free.
Also disable TS (task switch) flag in cr0 during kernel initialization,
so FPU faults are not raised. This became necessary since GCC lately
aggressively generates FPU instructions at arbitrary places and also at
early kernel-bootstrapping stages.
fixes#3365
GCC version 7 and above generate calls to __divmoddi for 64bit integer
division on 32-bit. Unfortunately, libgcc liberaries of older compilers
lack this symbol and are still in use by Debian/Ubuntu LTS at least.
* added global offset table relative loading for global symbols
* removed 'initial_sp' and 'initial_x0' because they are currently not
used on this platform. If required they are easy to resurrect.
issue #3260
The libc features support for SOCK_CLOEXEC now which gets set via
the type argument in 'libnl'. Since we are only interested in the
actual type, i.e. if it is SOCK_RAW, just ignore the flags.
Issue #3289.
* Adjust expected pow(-1/1, inf/-inf/nan) output to current libm
behavior (as in FreeBSD, glibc, and OpenLibm) and return 1 on
x86_64/x86_32/arm
* Add 'double float' outputs for ARM which are defined to float
issue #3289
This prevents
error copying "bin/libm.lib.so": no such file or directory
error copying "bin/posix.lib.so": no such file or directory
when running "make run/noux" from an empty build directory.
On some platforms (foc+pbxa9, hw+imx53_qsb_tz, hw+rpi) the default buffer size
is to much for the RAM available on the board. Thus, decrease the buffer size
and therefore the number of polls for these platforms only.
Fixes#3354
