forked from ExternalVendorCode/Signal-Server
v2.4.1
This commit is contained in:
48
CHANGELOG
48
CHANGELOG
@@ -1,16 +1,31 @@
|
||||
Signal Server changelog
|
||||
SIGNAL SERVER CHANGE LOG
|
||||
|
||||
v2.3 - 29 September 2014
|
||||
v2.41 - 27 February 2015
|
||||
Simpler PPA output for scripting
|
||||
Enabled new models for PPA (previously just ITM)
|
||||
#Define to enable HD mem options/build at build time (-DHD)
|
||||
Optimised build command (-Ofast) to improve speed by 14%
|
||||
Improved test script
|
||||
|
||||
2.4 - January 2015
|
||||
Added SUI, ECC33, Ericsson models in new 'models' module
|
||||
Added model validation
|
||||
Retired individual model files as some models only 1 or 2 lines of code
|
||||
|
||||
2.31 - October 2014
|
||||
ERP up to 5MW for Mexican TV(!)
|
||||
|
||||
2.3 - 29 September 2014
|
||||
Replaced itm.cpp with itwom3.0.cpp and added ITWOM model as result
|
||||
|
||||
v2.23 - 14 August 2014
|
||||
2.23 - 14 August 2014
|
||||
Improved diffraction model to work only for dips deeper than 20m and not to exaggerate result by an arbitrary figure (3)
|
||||
Fixed false 'frequency too low' error message for FSPL model which was intended for Hata models only.
|
||||
|
||||
v2.22 -
|
||||
2.22 -
|
||||
Fixed LOS not outputting bounds
|
||||
|
||||
v2.2 -
|
||||
2.2 -
|
||||
Made .dot output opt in to save some disk space
|
||||
Changed version number to line 1 of main.cpp instead of buried in code in two places.
|
||||
|
||||
@@ -18,55 +33,54 @@ v2.1 -
|
||||
Added experimental dual core support with -haf
|
||||
Requires double the RAM
|
||||
|
||||
v1.3.8 - 16 Jan 2014
|
||||
1.3.8 - 16 Jan 2014
|
||||
Added Free Space Path Loss model (with optional diffraction)
|
||||
|
||||
v1.3.7 - 30 Dec 2013
|
||||
1.3.7 - 30 Dec 2013
|
||||
Added propagation model option (-pm)
|
||||
Added HATA urban/suburban/open models (150-1500MHz)
|
||||
Added COST231-Hata (urban) model (1500-2000MHz)
|
||||
Added custom Knife Edge Diffraction option (-ked) to enhance new models
|
||||
Removed unused variables
|
||||
|
||||
v1.3.6 - 12 Aug 2013
|
||||
1.3.6 - 12 Aug 2013
|
||||
Added LOS model for up to 100GHz
|
||||
Added 1 arc second (3600 pixels/degree) support (-res 3600)
|
||||
|
||||
v1.3.5 - 07 Jul 2013
|
||||
1.3.5 - 07 Jul 2013
|
||||
Reduced maxpages to 9
|
||||
Added memset() to clear DEM before use
|
||||
|
||||
v1.3.4 - 16 May 2013
|
||||
1.3.4 - 16 May 2013
|
||||
High resolution SRTM1 1-arc second DEM support added.
|
||||
Use -res 3600 and ensure .sdf files are produced with srtm2sdf-hd
|
||||
|
||||
v1.3.3 - 04 Nov 2012
|
||||
1.3.3 - 04 Nov 2012
|
||||
Air planning:
|
||||
Increased maximum Tx height to 60,000 (m/f)
|
||||
Increased maximum Rx height to 60,000 (m/f)
|
||||
|
||||
v1.3.2 - 04 Oct 2012
|
||||
1.3.2 - 04 Oct 2012
|
||||
Re-instated grey scale option to allow for terrain background.
|
||||
Off by default. Enable with switch -t
|
||||
|
||||
v1.3 - 03 Jan 2012
|
||||
1.3 - 03 Jan 2012
|
||||
Added user defined clutter layers from SPLAT! (-udt switch)
|
||||
|
||||
v1.2 - 31 Dec 2011
|
||||
1.2 - 31 Dec 2011
|
||||
Max colours increased from 32 to 128
|
||||
Radius value fixed at metric
|
||||
Metric / Imperial conversion bug fixed
|
||||
|
||||
v1.1 - 08 Dec 2011
|
||||
1.1 - 08 Dec 2011
|
||||
Max Tx altitude increased to 20,000(m) for high altitude aircraft. "Can you 'ere me now?"
|
||||
Added 2 new options -tercon, -terdic for *custom* dielectric values and ground conductivity. -te terrain option remains. Use with care!
|
||||
New Earth Dielectric range (Permittivity): 80 to 0.1
|
||||
New Conductivity range (Siemens/m): 0.01 to 0.000001
|
||||
|
||||
v1.0 - 19 November 2011
|
||||
1.0 - 19 November 2011
|
||||
SS released.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
Reference in New Issue
Block a user