ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 22:23:27 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
fb4d7a9680
openwrt/target/linux/ramips/dts
History
David Bauer fb4d7a9680 ramips: add support for Ubiquiti UniFi 6 Lite 
Hardware
--------
MediaTek MT7621AT
256M DDR3
32M SPI-NOR
MediaTek MT7603 2T2R 802.11n 2.4GHz
MediaTek MT7915 2T2R 802.11ax 5GHz

Not Working
-----------
 - Bluetooth (connected to UART3)

UART
----

UART is located in the lower left corner of the board. Pinout is

0 - 3V3 (don't connect)
1 - RX
2 - TX
3 - GND

Console is 115200 8N1.

Boot
----

1. Connect to the serial console and connect power.

2. Double-press ESC when prompted

3. Set the fdt address

   $ fdt addr $(fdtcontroladdr)

4. Remove the signature node from the control FDT

   $ fdt rm /signature

5. Transfer and boot the OpenWrt initramfs image to the device.
   Make sure to name the file C0A80114.img and have it reachable at
   192.168.1.1/24

   $ tftpboot; bootm

Installation
------------

1. Connect to the booted device at 192.168.1.20 using username/password
   "ubnt".

2. Update the bootloader environment.

   $ fw_setenv devmode TRUE
   $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr);
     fdt rm /signature; bootubnt"
   $ fw_setenv bootcmd "run boot_openwrt"

3. Transfer the OpenWrt sysupgrade image to the device using SCP.

4. Check the mtd partition number for bs / kernel0 / kernel1

   $ cat /proc/mtd

5. Set the bootselect flag to boot from kernel0

   $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4

6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1

   $ dd if=openwrt.bin of=/dev/mtdblock6
   $ dd if=openwrt.bin of=/dev/mtdblock7

7. Reboot the device. It should boot into OpenWrt.

Below are the original installation instructions prior to the discovery
of "devmode=TRUE". They are not required for installation and are
documentation only.

The bootloader employs signature verification on the FIT image
configurations. This way, booting unauthorized image without patching
the bootloader is not possible. Manually configuring the bootcmd in the
U-Boot envronment won't work, as this is restored to the default value
if modified.

The bootloader is made up of three different parts.

1. The SPL performing early board initialization and providing a XModem
   recovery in case the PBL is missing

2. The PBL being the primary U-Boot application and containing the
   control FDT. It is LZMA packed with a uImage header.

3. A Ubiquiti standalone U-Boot application providing the main boot
   routine as well as their recovery mechanism.

In a perfect world, we would only replace the PBL, as the SPL does not
perform checks on the PBLs integrity. However, as the PBL is in the same
eraseblock as the SPL, we need to at least rewrite both.

The bootloader will only verify integrity in case it has a "signature"
node in it's control device-tree. Renaming the signature node to
something else will prevent this from happening.

Warning: These instructions are based on the firmware intially
shipped with the device and potentially brick your device in a way it
can only be recovered using a SPI flasher.

Only (!) proceed if you understand this!

1. Extract the bootloader from the U-Boot partition using the OpenWrt
   initramfs image.

2. Split the bootloader into it's 3 components:

   $ dd if=bootloader.bin of=spl.bin bs=1 skip=0 count=45056
   $ dd if=bootloader.bin of=pbl.uimage bs=1 skip=45056 count=143360
   $ dd if=bootloader.bin of=ubnt.uimage bs=1 skip=188416

3. Strip the uImage header from the PBL

   $ dd if=pbl.uimage of=pbl.lzma bs=64 skip=1

4. Decompress the PBL

   $ lzma -d pbl.lzma --single-stream

   The decompressed PBL sha256sum should be
   d8b406c65240d260cf15be5f97f40c1d6d1b6e61ec3abed37bb841c90fcc1235

5. Open the decompressed PBL using your favorite hexeditor. Locate the
   control FDT at offset 0x4CED0 (0xD00DFEED). At offset 0x4D5BC, the
   label for the signature node is located. Rename the "signature"
   string at this offset to "signaturr".

   The patched PBL sha256sum should be
   d028e374cdb40ba44b6e3cef2e4e8a8c16a3b85eb15d9544d24fdd10eed64c97

6. Compress the patched PBL

   $ lzma -z pbl --lzma1=dict=67108864

   The resulting pbl.lzma file should have the sha256sum
   7ae6118928fa0d0b3fe4ff81abd80ecfd9ba2944cb0f0a462b6ae65913088b42

7. Create the PBL uimage

   $ SOURCE_DATE_EPOCH=1607909492 mkimage -A mips -O u-boot -C lzma
     -n "U-Boot 2018.03 [UniFi,v1.1.40.71]" -a 84000000 -e 84000000
     -T firmware -d pbl.lzma patched_pbl.uimage

   The resulting patched_pbl.uimage should have the sha256sum
   b90d7fa2dcc6814180d3943530d8d6b0d6a03636113c94e99af34f196d3cf2ce

8. Reassemble the complete bootloader

   $ dd if=patched_pbl.uimage of=aligned_pbl.uimage bs=143360 count=1
     conv=sync
   $ cat spl.bin > patched_uboot.bin
   $ cat aligned_pbl.uimage >> patched_uboot.bin
   $ cat ubnt.uimage >> patched_uboot.bin

   The resulting patched_uboot.bin should have the sha256sum
   3e1186f33b88a525687285c2a8b22e8786787b31d4648b8eee66c672222aa76b

9. Transfer your patched bootloader to the device. Also install the
   kmod-mtd-rw package using opkg and load it.

   $ insmod mtd-rw.ko i_want_a_brick=1

   Write the patched bootloader to mtd0

   $ mtd write patched_uboot.bin u-boot

10. Erase the kernel1 partition, as the bootloader might otherwise
    decide to boot from there.

    $ mtd erase kernel1

11. Transfer the OpenWrt sysupgrade image to the device and install
    using sysupgrade.

FIT configurations
------------------

In the future, the MT7621 UniFi6 family can be supported by a single
OpenWrt image.

config@1: U6 Lite
config@2: U6 IW
config@3: U6 Mesh
config@4: U6 Extender
config@5: U6 LR-EA (Early Access - GA is MT7622)

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-01-05 16:25:13 +01:00
..
mt7620a_aigale_ai-br100.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_alfa-network_ac1200rm.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_alfa-network_r36m-e4g.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_alfa-network_tube-e4g.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_asus_rp-n53.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_asus_rt-ac5x.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_asus_rt-ac51u.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_asus_rt-ac54u.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_bdcom_wap2100-sk.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_buffalo_whr-300hp2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_buffalo_whr-600d.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_buffalo_whr-1166d.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_cameo_810.dtsi treewide: add space before SPDX identifier 2020-11-25 19:34:13 +01:00
mt7620a_dlink_dch-m225.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_dlink_dir-510l.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_dlink_dir-810l.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_dlink_dwr-118-a1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_dlink_dwr-118-a2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_dlink_dwr-960.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_dovado_tiny-ac.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_edimax_br-6478ac-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_edimax_ew-747x.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_edimax_ew-7476rpc.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_edimax_ew-7478ac.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_edimax_ew-7478apc.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_engenius_esr600.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_fon_fon2601.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_glinet_gl-mt300a.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_glinet_gl-mt300n.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_glinet_gl-mt750.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_head-weblink_hdrm200.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_hiwifi_hc5x61.dtsi ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_hiwifi_hc5661.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_hiwifi_hc5761.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_hiwifi_hc5861.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_hnet_c108.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_iodata_wn-ac733gr3.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_iodata_wn-ac1167gr.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_iptime_a104ns.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_iptime_a1004ns.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_iptime.dtsi ramips: increase spi-max-frequency for ipTIME mt7620 devices 2020-04-18 12:35:54 +08:00
mt7620a_kimax_u25awf-h1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_lava_lr-25g001.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_lb-link_bl-w1200.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_lenovo_newifi-y1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_lenovo_newifi-y1.dtsi ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_lenovo_newifi-y1s.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_linksys_e1700.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_microduino_microwrt.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_netgear_ex3x00_ex61xx.dtsi ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_netgear_ex2700_wn3000rp-v3.dtsi ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620a_netgear_ex2700.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_netgear_ex3700.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_netgear_ex6120.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_netgear_ex6130.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_netgear_wn3000rp-v3.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_netis_wf2770.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_ohyeah_oy-0001.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_phicomm_k2g.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_phicomm_psg1208.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_phicomm_psg1218.dtsi ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_phicomm_psg1218a.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_phicomm_psg1218b.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_planex_cs-qr10.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_planex_db-wrt01.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_planex_mzk-750dhp.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_planex_mzk-ex300np.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_planex_mzk-ex750np.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_ralink_mt7620a-evb.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620a_ralink_mt7620a-mt7530-evb.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620a_ralink_mt7620a-mt7610e-evb.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_ralink_mt7620a-v22sg-evb.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620a_sanlinking_d240.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_sercomm_na930.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_tplink_archer-c2-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_tplink_archer-c20-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_tplink_archer-c20i.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_tplink_archer-c50-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_tplink_archer-mr200.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_tplink_archer.dtsi ramips: increase SPI frequency for MT7620 Archer 2020-07-22 17:20:24 +02:00
mt7620a_tplink_re2x0-v1.dtsi ramips: add support for TP-Link RE210 v1 2020-03-09 21:47:56 +01:00
mt7620a_tplink_re200-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_tplink_re210-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_trendnet_tew-810dr.dts treewide: add space before SPDX identifier 2020-11-25 19:34:13 +01:00
mt7620a_wavlink_wl-wn530hg4.dts ramips: add support for Wavlink WL-WN530HG4 2020-10-27 21:20:16 +01:00
mt7620a_xiaomi_miwifi-mini.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_youku_yk1.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_yukai_bocco.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_zbtlink_zbt-ape522ii.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620a_zbtlink_zbt-we826-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620a_zbtlink_zbt-we826-32m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620a_zbtlink_zbt-we826-e.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_zbtlink_zbt-we826.dtsi ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_zbtlink_zbt-we1026-5g-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620a_zbtlink_zbt-we1026-5g.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_zbtlink_zbt-we1026-h-32m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620a_zbtlink_zbt-we1026-h.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a_zbtlink_zbt-we1026.dtsi ramips: replace pinctrl property names 2020-04-12 22:29:17 +08:00
mt7620a_zte_q7.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620a_zyxel_keenetic-viva.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620a.dtsi ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620n_asus_rt-n12p.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_asus_rt-n14u.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_buffalo_wmr-300.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_comfast_cf-wr800n.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620n_dlink_dwr-116-a1.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620n_dlink_dwr-921-c1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_dlink_dwr-922-e2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_elecom_wrh-300cr.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620n_hootoo_ht-tm05.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_kimax_u35wf.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_kingston_mlw221.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620n_kingston_mlwg2.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620n_netgear_jwnr2010-v5.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_netgear_n300.dtsi ramips: add support for Netgear JWNR2010 v5 2020-08-06 16:56:07 +02:00
mt7620n_nexx_wt3020-4m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620n_nexx_wt3020-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7620n_nexx_wt3020.dtsi ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620n_ravpower_rp-wd03.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_sunvalley_filehub.dtsi treewide: use more descriptive names for concatenated partitions 2020-12-27 20:33:45 +01:00
mt7620n_vonets_var11n-300.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7620n_wrtnode_wrtnode.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620n_zbtlink_zbt-cpe102.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620n_zbtlink_zbt-wa05.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
mt7620n_zbtlink_zbt-we2026.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_zbtlink_zbt-wr8305rt.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_zyxel_keenetic-omni-ii.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n_zyxel_keenetic-omni.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7620n.dtsi ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_adslr_g7.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_afoundry_ew1200.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_alfa-network_quad-e4g.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_asiarf_ap7621-001.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_asiarf_ap7621-nv1.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_asiarf_ap7621.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_asus_rt-ac57u.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_asus_rt-ac65p.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_asus_rt-ac85p.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_asus_rt-acx5p.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_asus_rt-n56u-b1.dts ramips: add support for ASUS RT-N56U B1 2020-11-28 20:51:50 +01:00
mt7621_buffalo_wsr-600dhp.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_buffalo_wsr-1166dhp.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_buffalo_wsr-2533dhpl.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_d-team_newifi-d2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_d-team_pbr-m1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_dlink_dir-8xx-a1.dtsi ramips: add support for D-Link DIR-882 R1 2020-12-22 19:11:50 +01:00
mt7621_dlink_dir-8xx-r1.dtsi ramips: add support for D-Link DIR-882 R1 2020-12-22 19:11:50 +01:00
mt7621_dlink_dir-8xx-x1.dtsi ramips: add support for D-Link DIR-882 R1 2020-12-22 19:11:50 +01:00
mt7621_dlink_dir-860l-b1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_dlink_dir-867-a1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_dlink_dir-878-a1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_dlink_dir-882-a1.dts ramips: add support for D-Link DIR-882 R1 2020-12-22 19:11:50 +01:00
mt7621_dlink_dir-882-r1.dts ramips: add support for D-Link DIR-882 R1 2020-12-22 19:11:50 +01:00
mt7621_dlink_dir-882-x1.dtsi ramips: add support for D-Link DIR-882 R1 2020-12-22 19:11:50 +01:00
mt7621_dlink_dir-1960-a1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_dlink_dir-2640-a1.dts ramips: add support for D-Link DIR-2640 A1 2020-11-11 17:35:10 +01:00
mt7621_dlink_dir-2660-a1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_dlink_dir-xx60-a1.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_edimax_ra21s.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_edimax_re23s.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_edimax_rg21s.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_edimax_rx21s.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_elecom_wrc-1167ghbk2-s.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_elecom_wrc-1167gs2-b.dts ramips: add support for ELECOM WRC-1167GS2-B 2020-12-22 21:44:57 +01:00
mt7621_elecom_wrc-1167gst2.dts ramips: add support for ELECOM WRC-1167GST2 2020-12-22 21:44:57 +01:00
mt7621_elecom_wrc-1750gs.dts ramips: mt7621: create DTSI for ELECOM WRC GS devices with 2 PCI 2020-12-22 21:44:57 +01:00
mt7621_elecom_wrc-1750gsv.dts ramips: mt7621: create DTSI for ELECOM WRC GS devices with 2 PCI 2020-12-22 21:44:57 +01:00
mt7621_elecom_wrc-1900gst.dts ramips: mt7621: create DTSI for ELECOM WRC GS devices with 2 PCI 2020-12-22 21:44:57 +01:00
mt7621_elecom_wrc-2533gst2.dts ramips: mt7621: create DTSI for ELECOM WRC GS devices with 2 PCI 2020-12-22 21:44:57 +01:00
mt7621_elecom_wrc-2533gst.dts ramips: mt7621: create DTSI for ELECOM WRC GS devices with 2 PCI 2020-12-22 21:44:57 +01:00
mt7621_elecom_wrc-gs-1pci.dtsi ramips: add support for ELECOM WRC-1167GS2-B 2020-12-22 21:44:57 +01:00
mt7621_elecom_wrc-gs-2pci.dtsi ramips: mt7621: create DTSI for ELECOM WRC GS devices with 2 PCI 2020-12-22 21:44:57 +01:00
mt7621_elecom_wrc-gs.dtsi ramips: add support for ELECOM WRC-1167GS2-B 2020-12-22 21:44:57 +01:00
mt7621_firefly_firewrt.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_gehua_ghl-r-001.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_glinet_gl-mt1300.dts ramips: add support for GL.iNet GL-MT1300 2020-12-17 12:05:26 +01:00
mt7621_gnubee_gb-pc1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_gnubee_gb-pc2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_hiwifi_hc5962.dts treewide: use more descriptive names for concatenated partitions 2020-12-27 20:33:45 +01:00
mt7621_iodata_wn-ax1167gr2.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_iodata_wn-ax1167gr.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_iodata_wn-ax2033gr.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_iodata_wn-dx1167r.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_iodata_wn-gx300gr.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_iodata_wn-xx-xr.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_iodata_wnpr2600g.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_iptime_a6ns-m.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_iptime_a8004t.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_jcg_jhr-ac876m.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_lenovo_newifi-d1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_linksys_ea7xxx.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_linksys_ea7300-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_linksys_ea7300-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_linksys_ea7500-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_linksys_re6500.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_mediatek_ap-mt7621a-v60.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_mediatek_mt7621-eval-board.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_mikrotik_routerboard-7xx.dtsi ramips: add support for MikroTik RouterBOARD 760iGS (hEX S) 2020-08-13 12:47:45 +02:00
mt7621_mikrotik_routerboard-750gr3.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_mikrotik_routerboard-760igs.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_mikrotik_routerboard-m11g.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_mikrotik_routerboard-m33g.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_mikrotik.dtsi ramips/mt7621: create common DTSI for Mikrotik devices 2020-08-13 12:47:45 +02:00
mt7621_mqmaker_witi.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_mtc_wr1201.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_ex6150.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_r6220.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_r6260.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_r6350.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_r6700-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_r6800.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_r6850.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_sercomm_ayx.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_sercomm_bzv.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_sercomm_chj.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_wac104.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_wac124.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netgear_wndr3700-v5.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_netis_wf2881.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_phicomm_k2p.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_planex_vr500.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_samknows_whitebox-v8.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_storylink_sap-g3200u3.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_telco-electronics_x1.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7621_thunder_timecloud.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_totolink_a7000r.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_totolink_x5000r.dts ramips: add support for TOTOLINK X5000R 2020-10-25 22:27:44 +08:00
mt7621_tplink_re350-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_tplink_re500-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_tplink_re650-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_tplink_rexx0-v1.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_ubnt_edgerouter-x-sfp.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_ubnt_edgerouter-x.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_ubnt_edgerouter-x.dtsi ramips: move redundant console setup to mt7621 SoC DTSI 2020-07-17 12:14:32 +02:00
mt7621_ubnt_unifi-6-lite.dts ramips: add support for Ubiquiti UniFi 6 Lite 2021-01-05 16:25:13 +01:00
mt7621_ubnt_unifi-nanohd.dts ramips: add support for Ubiquiti UniFi 6 Lite 2021-01-05 16:25:13 +01:00
mt7621_ubnt_unifi.dtsi ramips: add support for Ubiquiti UniFi 6 Lite 2021-01-05 16:25:13 +01:00
mt7621_unielec_u7621-06-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_unielec_u7621-06-64m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_unielec_u7621-06.dtsi ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
mt7621_wavlink_wl-wn531a6.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_wevo_11acnas.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_wevo_w2914ns-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_wevo_w2914ns-v2.dtsi ramips: move redundant console setup to mt7621 SoC DTSI 2020-07-17 12:14:32 +02:00
mt7621_winstars_ws-wn583a6.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_xiaomi_mi-router-3-pro.dts ramips: use full names for Xiaomi Mi Router devices 2020-12-08 17:18:57 +01:00
mt7621_xiaomi_mi-router-3g-v2.dts ramips: use full names for Xiaomi Mi Router devices 2020-12-08 17:18:57 +01:00
mt7621_xiaomi_mi-router-3g.dts ramips: use full names for Xiaomi Mi Router devices 2020-12-08 17:18:57 +01:00
mt7621_xiaomi_mi-router-4a-3g-v2.dtsi ramips: use m25p,fast-read on Xiaomi Mi Router 4A Gb/3G v2 2020-11-18 21:13:46 +01:00
mt7621_xiaomi_mi-router-4a-gigabit.dts ramips: add Xiaomi Mi Router 4A Gigabit explicitly 2020-11-12 17:18:26 +01:00
mt7621_xiaomi_mi-router-ac2100.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_xiaomi_redmi-router-ac2100.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_xiaomi_router-ac2100.dtsi ramips: move redundant console setup to mt7621 SoC DTSI 2020-07-17 12:14:32 +02:00
mt7621_xiaoyu_xy-c5.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_xzwifi_creativebox-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_youhua_wr1200js.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_youku_yk-l2.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
mt7621_zbtlink_zbt-we1326.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_zbtlink_zbt-we3526.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_zbtlink_zbt-wg2626.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_zbtlink_zbt-wg3526-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_zbtlink_zbt-wg3526-32m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7621_zbtlink_zbt-wg3526.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_zio_freezio.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621_zyxel_wap6805.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7621.dtsi ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
mt7628an_alfa-network_awusfree1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_asus_rt-n1x.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_asus_rt-n10p-v3.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_asus_rt-n11p-b1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_asus_rt-n12-vp-b1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_buffalo_wcr-1166ds.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_cudy_wr1000.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_d-team_pbr-d1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_duzun_dm06.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7628an_glinet_gl-mt300n-v2.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
mt7628an_glinet_microuter-n300.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_glinet_vixmini_microuter.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_glinet_vixmini.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_hak5_wifi-pineapple-mk7.dts ramips: add support for the Hak5 WiFi Pineapple Mark 7 2020-11-18 23:49:34 +01:00
mt7628an_hilink_hlk-7628n.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_hiwifi_hc5x61a.dtsi ramips: mt7628: update dts for upstream gpio-mt7621 driver 2020-04-12 22:27:18 +08:00
mt7628an_hiwifi_hc5661a.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_hiwifi_hc5761a.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_hiwifi_hc5861b.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_iptime_a3.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_iptime_a604m.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_iptime.dtsi ramips: replace pinctrl property names 2020-04-12 22:29:17 +08:00
mt7628an_jotale_js76x8-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7628an_jotale_js76x8-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7628an_jotale_js76x8-32m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7628an_jotale_js76x8.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_mediatek_linkit-smart-7688.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_mediatek_mt7628an-eval-board.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7628an_mercury_mac1200r-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_netgear_r6xxx.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_netgear_r6020.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_netgear_r6080.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_netgear_r6120.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_onion_omega2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_onion_omega2.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_onion_omega2p.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_rakwireless_rak633.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_ravpower_rp-wd009.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
mt7628an_skylab_skw92a.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
mt7628an_tama_w06.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
mt7628an_totolink_a3.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_totolink_lr1200.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_tplink_8m-split-uboot.dtsi ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_8m.dtsi ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_archer-c20-v4.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_archer-c20-v5.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_archer-c50-v3.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_archer-c50-v4.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_re200-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_tplink_re200-v3.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_tplink_re200-v4.dts ramips: add support for TP-Link RE200 v4 2020-10-20 03:01:13 +02:00
mt7628an_tplink_re200.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_tplink_re220-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_tplink_re305-v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_tplink_tl-mr3020-v3.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-mr3420-v5.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-mr6400-v4.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-mr6400-v5.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-wa801nd-v5.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-wr802n-v4.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-wr840n-v4.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-wr840n-v5.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_tplink_tl-wr841n-v13.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-wr841n-v14.dts ramips: remove option to set WiFi LED via aliases 2020-10-02 14:51:57 +02:00
mt7628an_tplink_tl-wr842n-v5.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-wr850n-v2.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_tplink_tl-wr902ac-v3.dts ramips: simplify status for ehci/ohci on mt7628 TP-Link devices 2020-12-07 14:22:00 +01:00
mt7628an_unielec_u7628-01-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7628an_unielec_u7628-01.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_vocore_vocore2-lite.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_vocore_vocore2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_vocore_vocore2.dtsi ramips: replace pinctrl property names 2020-04-12 22:29:17 +08:00
mt7628an_wavlink_wl-wn570ha1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_wavlink_wl-wn575a3.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_wavlink_wl-wn577a2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_widora_neo-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7628an_widora_neo-32m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
mt7628an_widora_neo.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_wiznet_wizfi630s.dts treewide: add space before SPDX identifier 2020-11-25 19:34:13 +01:00
mt7628an_wrtnode_wrtnode2.dtsi ramips: dts: use generic node name for flash 2020-05-09 14:48:50 +02:00
mt7628an_wrtnode_wrtnode2p.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_wrtnode_wrtnode2r.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_xiaomi_mi-router-4.dtsi ramips: mt7628: create shared DTSI for Xiaomi Mi Router 4A/4C 2020-12-08 15:39:00 +01:00
mt7628an_xiaomi_mi-router-4a-100m.dts ramips: use full names for Xiaomi Mi Router devices 2020-12-08 17:18:57 +01:00
mt7628an_xiaomi_mi-router-4c.dts ramips: mt7628: create shared DTSI for Xiaomi Mi Router 4A/4C 2020-12-08 15:39:00 +01:00
mt7628an_xiaomi_miwifi-nano.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_zbtlink_zbt-we1226.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
mt7628an_zyxel_keenetic-extra-ii.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
mt7628an.dtsi ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt2880_airlink101_ar670w.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt2880_airlink101_ar725w.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt2880_asus_rt-n15.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt2880_belkin_f5d8235-v1.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt2880_buffalo_wli-tx4-ag300n.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt2880_buffalo_wzr-agl300nh.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt2880_dlink_dap-1522-a1.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt2880_ralink_v11st-fe.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt2880.dtsi ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3050_8devices_carambola.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3050_allnet_all0256n-4m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3050_allnet_all0256n-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3050_allnet_all0256n.dtsi ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt3050_alphanetworks_asl26555-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3050_alphanetworks_asl26555-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3050_alphanetworks_asl26555.dtsi ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt3050_arcwireless_freestation5.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_asus_rt-g32-b1.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3050_asus_rt-n10-plus.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_asus_wl-330n3g.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_asus_wl-330n.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_dlink_dcs-930.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_dlink_dir-300-b1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_dlink_dir-600-b1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_dlink_dir-615-d.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_dlink_dir-620-a1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_edimax_3g-6200n.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_edimax_3g-6200nl.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_huawei_d105.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_jcg_jhr-n805r.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_netcore_nw718.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_sparklan_wcr-150gn.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_teltonika_rut5xx.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_tenda_w150m.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050_trendnet_tew-638apb-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3050.dtsi ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3052_accton_wr6202.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_alfa-network_w502u.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_argus_atp-52b.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_asiarf_awapn2403.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_asus_rt-n13u.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_aximcom_mr-102n.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_aztech_hw550-3g.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_belkin_f5d8235-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_buffalo_whr-g300n.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_dlink_dap-1350.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_engenius_esr-9753.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_fon_fonera-20n.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_hauppauge_broadway.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_huawei_hg255d.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_jcg_jhr-n825r.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_jcg_jhr-n926r.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_mofinetwork_mofi3500-3gn.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_netgear_wnce2001.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_nexaira_bc2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_omnima_miniembwifi.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_petatel_psr-680w.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_planex_mzk-w300nh2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_planex_mzk-wdpr.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3052_poray_ip2202.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_prolink_pwh2004.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_ralink_v22rw-2x2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_sitecom_wl-351.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_skyline_sl-r7205.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_tenda_3g300m.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_tenda_w306r-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_unbranded_wr512-3gn-4m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3052_unbranded_wr512-3gn-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3052_unbranded_wr512-3gn.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_unbranded_xdx-rn502j.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_upvel_ur-326n4g.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_upvel_ur-336un.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_zyxel_keenetic.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3052_zyxel_nbg-419n.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3352_allnet_all5002.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt3352_dlink_dir-615-h1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3352_dlink_dir-620-d1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3352_zyxel_nbg-419n-v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3352.dtsi ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3662_asus_rt-n56u.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3662_dlink_dir-645.dts ramips: fix logic level for DIR-645 buttons 2020-10-03 22:52:58 +02:00
rt3662_edimax_br-6475nd.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
rt3662_engenius_esr600h.dts ramips: add support for Senao Engenius ESR600H 2020-12-22 19:11:50 +01:00
rt3662_loewe_wmdr-143n.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt3662_omnima_hpm.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3662_samsung_cy-swr1100.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3883_belkin_f9k110x.dtsi ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
rt3883_belkin_f9k1109v1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3883_sitecom_wlr-6000.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3883_trendnet_tew-691gr.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3883_trendnet_tew-692gr.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt3883.dtsi ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_7links_px-4885-4m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_7links_px-4885-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_7links_px-4885.dtsi ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt5350_airlive_air3gii.dts ramips: drop redundant status for gpio/gpio0 2020-12-04 15:52:23 +01:00
rt5350_allnet_all5003.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_asiarf_awm002-evb-4m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_asiarf_awm002-evb-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_asiarf_awm002-evb.dtsi ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_belkin_f7c027.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt5350_dlink_dcs-930l-b1.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_dlink_dir-300-b7.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt5350_dlink_dir-320-b1.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_dlink_dir-610-a1.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt5350_dlink_dwr-512-b.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt5350_easyacc_wizard-8800.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
rt5350_hame_mpr-a1.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
rt5350_hame_mpr-a2.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_hilink_hlk-rm04.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_hootoo_ht-tm02.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_intenso_memory2move.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_nexx_wt1520-4m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_nexx_wt1520-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_nexx_wt1520.dtsi ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_nixcore_x1-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_nixcore_x1-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_nixcore_x1.dtsi ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_olimex_rt5350f-olinuxino-evb.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_olimex_rt5350f-olinuxino.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_olimex_rt5350f-olinuxino.dtsi ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
rt5350_omnima_miniembplug.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_planex_mzk-dp150n.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
rt5350_poray_m3.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_poray_m4-4m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_poray_m4-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_poray_m4.dtsi ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_poray_x5.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_poray_x8.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_tenda_3g150b.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
rt5350_trendnet_tew-714tru.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_unbranded_a5-v11.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
rt5350_vocore_vocore-8m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_vocore_vocore-16m.dts ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00
rt5350_vocore_vocore.dtsi ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_wansview_ncs601w.dts ramips: remove redundant status for USB controllers 2020-12-07 14:22:00 +01:00
rt5350_wiznet_wizfi630a.dts ramips: do not enable unused GPIO controllers 2020-12-17 12:10:10 +01:00
rt5350_zorlik_zl5900v2.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt5350_zyxel_keenetic-lite-b.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt5350_zyxel_keenetic-start.dts ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
rt5350.dtsi ramips: move dts-v1 statement to top-level DTSI files 2020-09-25 23:26:40 +02:00