mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
b38d446ecd
Hardware
--------
SoC: Qualcomm IPQ8064
RAM: 235MB
Flash: 128MB NAND (Micron MT29F1G08ABBDAH4)
32MB SPI-NOR (Spansion FL256SAIFRO)
WLAN2: Qualcomm Atheros QCA9980
WLAN5: Qualcomm Atheros QCA9980
ETH: LAN1 - Atheros AR8035
LAN2 - Atheros AR8033
USB: USB-A, 2.0
LED: Power (yellow/amber)
LAN1 (yellow/amber)
LAN2 (yellow/amber)
WLAN2G (yellow)
WLAN5G (yellow)
BTN: Reset
Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage
MAC Address: LAN1 (label) at APPSBL partition
LAN2: label + 1
WLAN2: label + 8
WLAN5: label + 16
Installation
------------
Connect to the RJ45 console (TTL)
Connect LAN1 to host, set host ip as 192.168.1.10
Start a tftp server to serve the initramfs image
Open console connection (9600n8)
Connect power through the DC jack
`Hit any key to stop autoboot: 5`: press any key
`Enter G,Q,or H:`: press `K` to access the hidden option
`Enter password:`: `fap22b1!$` to access a limited u-boot console
`(FAP) #`: `tftpboot your_initramfs_image_name.itb`
`(FAP) #`: `bootm`
Once OpenWrt has booted, install the firmware through sysupgrade
Signed-off-by: JinGen Lim <openwrt@sn.sg>
|
||
|---|---|---|
| .. | ||
| base-files | ||
| chromium | ||
| files/arch/arm/boot/dts | ||
| generic | ||
| image | ||
| patches-6.1 | ||
| config-6.1 | ||
| Makefile | ||
| modules.mk | ||