openwrt/target/linux/bmips/image
Mathesh Velayudan 1d976f83e4 bmips: add support for TP-Link TD-W8968 V3
TP-Link TD-W8968 v3 is an 300Mbps Wireless N USB ADSL2+ Modem Router based on
Broadcom BCM6318 SoC.

Hardware:
   CPU:          Broadcom BCM6318, 333 MHz, 1 core
   Flash:        8MB
   RAM:          64 MB
   Ethernet:     4x 10/100 Mbps
   Wireless:     802.11b/g/n, BCM43217
   LEDs/Buttons: 10x / 3x
   USB:          1x 2.0

Flash instructions:
* Assign static IP 192.168.1.100 to PC
* Unplug the power source
* Press the RESET button at the router, don't release it yet!
* Plug the power source. Wait for some seconds
* Release the RESET button
* Browse to http://192.168.1.1
* Upload the openwrt-bmips-bcm6318-tp-link_td-w8968-v3-squashfs-cfe.bin file
* Wait some minutes until the firmware upgrade finish.

Signed-off-by: Mathesh Velayudan <123v.mathesh@gmail.com>
2024-08-24 20:35:30 +02:00
..
lzma-loader bmips: add new target 2021-02-22 18:29:44 +01:00
bcm6318.mk bmips: add support for TP-Link TD-W8968 V3 2024-08-24 20:35:30 +02:00
bcm6328.mk bmips: bcm6328: add support for D-Link DSL-2750B rev B1 2024-08-20 16:19:11 +02:00
bcm6358.mk bmips: add subtargets for each SoC 2023-04-10 10:04:08 +02:00
bcm6362.mk bmips: dgnd3700v2: add b43 wireless driver 2023-04-23 12:19:02 +02:00
bcm6368.mk bmips: add support for Actiontec R1000H 2023-06-15 17:58:58 +02:00
bcm63268.mk bmips: add support for Sagem F@ST3864OP 2024-06-26 19:28:13 +02:00
Makefile bmips: Build U-Boot into the XG6846 target 2024-05-01 21:32:23 +02:00