mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-18 02:40:19 +00:00
bmips: add support for TP-Link TD-W8968 V3
TP-Link TD-W8968 v3 is an 300Mbps Wireless N USB ADSL2+ Modem Router based on Broadcom BCM6318 SoC. Hardware: CPU: Broadcom BCM6318, 333 MHz, 1 core Flash: 8MB RAM: 64 MB Ethernet: 4x 10/100 Mbps Wireless: 802.11b/g/n, BCM43217 LEDs/Buttons: 10x / 3x USB: 1x 2.0 Flash instructions: * Assign static IP 192.168.1.100 to PC * Unplug the power source * Press the RESET button at the router, don't release it yet! * Plug the power source. Wait for some seconds * Release the RESET button * Browse to http://192.168.1.1 * Upload the openwrt-bmips-bcm6318-tp-link_td-w8968-v3-squashfs-cfe.bin file * Wait some minutes until the firmware upgrade finish. Signed-off-by: Mathesh Velayudan <123v.mathesh@gmail.com>
This commit is contained in:
Mathesh Velayudan
Álvaro Fernández Rojas
parent
ae5489e578
commit
1d976f83e4
@ -6,7 +6,8 @@
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
comtrend,ar-5315u)
|
||||
comtrend,ar-5315u |\
|
||||
tp-link,td-w8968-v3)
|
||||
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
|
||||
;;
|
||||
esac
|
||||
|
||||
@ -5,7 +5,8 @@
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
comtrend,ar-5315u)
|
||||
comtrend,ar-5315u |\
|
||||
tp-link,td-w8968-v3)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
|
||||
;;
|
||||
|
||||
@ -3,7 +3,8 @@
|
||||
. /lib/functions.sh
|
||||
|
||||
case "$(board_name)" in
|
||||
comtrend,ar-5315u)
|
||||
comtrend,ar-5315u) |\
|
||||
tp-link,td-w8968-v3)
|
||||
mtd fixtrx firmware
|
||||
;;
|
||||
esac
|
||||
|
||||
253
target/linux/bmips/dts/bcm6318-tp-link-td-w8968-v3.dts
Normal file
253
target/linux/bmips/dts/bcm6318-tp-link-td-w8968-v3.dts
Normal file
@ -0,0 +1,253 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6318.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TP-Link TD-W8968 V3";
|
||||
compatible = "tp-link,td-w8968-v3", "brcm,bcm6318";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_green;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
wlan {
|
||||
label = "wlan";
|
||||
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WLAN>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
bcm43217-sprom {
|
||||
compatible = "brcm,bcma-sprom";
|
||||
|
||||
pci-bus = <1>;
|
||||
pci-dev = <0>;
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0 1>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
brcm,sprom = "brcm/bcm43217-sprom.bin";
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&hsspi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <62500000>;
|
||||
spi-tx-bus-width = <2>;
|
||||
spi-rx-bus-width = <2>;
|
||||
reg = <0>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x000000 0x010000>;
|
||||
label = "cfe";
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_cfe_6a0: macaddr@6a0 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x6a0 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@10000 {
|
||||
compatible = "brcm,bcm963xx-imagetag";
|
||||
reg = <0x010000 0x7e0000>;
|
||||
label = "firmware";
|
||||
};
|
||||
|
||||
partition@7f0000 {
|
||||
reg = <0x7f0000 0x010000>;
|
||||
label = "nvram";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&leds {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_leds
|
||||
&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
|
||||
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
active-low;
|
||||
function = LED_FUNCTION_WPS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led_power_green: led@3 {
|
||||
reg = <3>;
|
||||
active-high;
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@4 {
|
||||
/* EPHY0 Act */
|
||||
reg = <4>;
|
||||
brcm,hardware-controlled;
|
||||
brcm,link-signal-sources = <4>;
|
||||
};
|
||||
|
||||
led@5 {
|
||||
/* EPHY1 Act */
|
||||
reg = <5>;
|
||||
brcm,hardware-controlled;
|
||||
brcm,link-signal-sources = <5>;
|
||||
};
|
||||
|
||||
led@6 {
|
||||
/* EPHY2 Act */
|
||||
reg = <6>;
|
||||
brcm,hardware-controlled;
|
||||
brcm,link-signal-sources = <6>;
|
||||
};
|
||||
|
||||
led@7 {
|
||||
/* EPHY3 Act */
|
||||
reg = <7>;
|
||||
brcm,hardware-controlled;
|
||||
brcm,link-signal-sources = <7>;
|
||||
};
|
||||
|
||||
led@8 {
|
||||
reg = <8>;
|
||||
active-low;
|
||||
function = LED_FUNCTION_WAN_ONLINE;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@10 {
|
||||
reg = <10>;
|
||||
active-low;
|
||||
label = "green:dsl";
|
||||
};
|
||||
|
||||
led@13 {
|
||||
reg = <13>;
|
||||
active-low;
|
||||
function = LED_FUNCTION_USB;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@16 {
|
||||
reg = <16>;
|
||||
active-low;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl_leds: leds {
|
||||
function = "led";
|
||||
pins = "gpio2", "gpio3",
|
||||
"gpio8", "gpio10",
|
||||
"gpio13", "gpio16";
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan4";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan3";
|
||||
|
||||
phy-handle = <&phy2>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
|
||||
phy-handle = <&phy3>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
|
||||
phy-handle = <&phy4>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh {
|
||||
status = "okay";
|
||||
};
|
||||
@ -12,3 +12,23 @@ define Device/comtrend_ar-5315u
|
||||
kmod-leds-bcm6328
|
||||
endef
|
||||
TARGET_DEVICES += comtrend_ar-5315u
|
||||
|
||||
define Device/tp-link_td-w8968-v3
|
||||
$(Device/bcm63xx-cfe)
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := TD-W8968
|
||||
DEVICE_VARIANT := V3
|
||||
DEVICE_ALT0_VENDOR := TP-Link
|
||||
DEVICE_ALT0_MODEL := TD-W8968
|
||||
DEVICE_ALT0_VARIANT := V4
|
||||
DEVICE_ALT1_VENDOR := TP-Link
|
||||
DEVICE_ALT1_MODEL := TD-W8960N
|
||||
DEVICE_ALT1_VARIANT := V5
|
||||
CHIP_ID := 6318
|
||||
CFE_BOARD_ID := 96318REF
|
||||
FLASH_MB := 8
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
||||
$(B43_PACKAGES) broadcom-43217-sprom \
|
||||
kmod-leds-bcm6328
|
||||
endef
|
||||
TARGET_DEVICES += tp-link_td-w8968-v3
|
||||
|
||||
Loading…
Reference in New Issue
Block a user