ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-03-11 06:54:21 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
openwrt/target/linux/ar71xx/files/arch/mips/ath79
History
John Crispin bdf76faa3e ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR900 
The MR900 must unset some bits in ETH_CFG which were set by u-boot to work
correctly under OpenWrt. But the global function
ath79_setup_qca955x_eth_cfg will not unset all of them to increase the
backward compatiblity with older mach-* files. A private (simplified)
version for MR900 can be used instead.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49069
2016-03-23 12:52:09 +00:00
..
dev-ap9x-pci.c
mac80211: ath9k: enable GPIO buttons
2016-03-05 09:45:03 +00:00
dev-ap9x-pci.h
mac80211: ath9k: enable GPIO buttons
2016-03-05 09:45:03 +00:00
dev-dsa.c
ar71xx: add v3.18 support
2015-02-15 19:45:29 +00:00
dev-dsa.h
…
dev-eth.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
dev-eth.h
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
dev-m25p80.c
ar71xx: Add ath79_register_m25p80_large to support >16MB SPI chips
2015-12-19 11:32:20 +00:00
dev-m25p80.h
ar71xx: Add ath79_register_m25p80_large to support >16MB SPI chips
2015-12-19 11:32:20 +00:00
dev-nfc.c
ar71xx: ar934x_nfc: fix memory initialization bug
2014-03-12 12:52:36 +00:00
dev-nfc.h
ar71xx: add ath79_nfc_set_ecc_mode helper
2013-09-19 18:43:42 +00:00
Kconfig.openwrt
ar71xx: Add support for the OMYlink OMY-X1
2016-03-16 09:26:58 +00:00
mach-alfa-ap96.c
ar71xx: add linux 3.14 support
2014-08-07 12:40:53 +00:00
mach-alfa-nx.c
ar71xx: remove the built-in MTD maps of several boards
2012-03-27 19:38:01 +00:00
mach-all0258n.c
ar71xx: remove the built-in MTD map of the ALL0258N
2012-07-03 15:24:01 +00:00
mach-all0315n.c
ar71xx: all0315n: fix ethernet according to vendor info
2012-08-29 10:37:54 +00:00
mach-antminer-s1.c
ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power
2015-10-26 09:01:28 +00:00
mach-antminer-s3.c
ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power
2015-10-26 09:01:28 +00:00
mach-antrouter-r1.c
V2 ar71xx : Add Support for the Bitmain Antrouter R1
2016-01-01 21:21:13 +00:00
mach-ap83.c
…
mach-ap96.c
ar71xx: remove the built-in MTD map of the AP96 board
2012-03-27 19:38:07 +00:00
mach-ap113.c
ar71xx: remove the built-in MTD maps of several boards
2012-03-27 19:38:01 +00:00
mach-ap132.c
ar71xx: add kernel support for Atheros AP132 Reference Board
2013-01-29 19:12:30 +00:00
mach-ap143.c
ar71xx: add support for ap143
2015-07-07 08:06:05 +00:00
mach-ap147.c
ar71xx: Add support for AP147-010 reference board
2015-07-24 09:09:42 +00:00
mach-ap152.c
ar71xx: fix ap152 support
2016-01-10 17:19:34 +00:00
mach-archer-c7.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-arduino-yun.c
ar71xx: Arduino Yun board 'WLAN RST' button support
2016-03-10 19:11:13 +00:00
mach-aw-nr580.c
…
mach-bhu-bxu2000n2-a.c
ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board
2013-10-30 06:50:57 +00:00
mach-bsb.c
ar71xx: Add support for Black Swift
2015-08-17 06:16:54 +00:00
mach-c55.c
ar71xx: Add support for AirTight Networks C-55
2015-12-23 14:43:35 +00:00
mach-cap324.c
ar71xx: Kernel board definition for PowerCloud CAP324
2015-12-19 11:27:19 +00:00
mach-cap4200ag.c
ar71xx: add support for the Senao CAP4200AG board
2012-10-27 08:55:38 +00:00
mach-carambola2.c
ar71xx: update Carambola2 platform data
2014-08-04 14:46:52 +00:00
mach-cf-e316n-v2.c
target: ar71xx: add support for COMFAST CF-E316N v2 board
2015-09-11 16:31:35 +00:00
mach-cpe510.c
ar71xx: add support for TP-LINK CPE210/220/510/520
2014-11-26 08:59:32 +00:00
mach-cr3000.c
ar71xx: Kernel board definition for PowerCloud CR3000
2015-12-19 11:27:25 +00:00
mach-cr5000.c
ar71xx: Kernel board definition for PowerCloud CR5000
2015-12-19 11:27:32 +00:00
mach-dgl-5500-a1.c
add D-link DGL-5500 A1 support
2014-11-27 14:27:34 +00:00
mach-dhp-1565-a1.c
ar71xx: Added support for D-link DHP-1565 rev. A1
2014-11-19 09:20:47 +00:00
mach-dir-505-a1.c
ar71xx: dir-505: fix reset button gpio active_low value
2015-02-09 12:17:00 +00:00
mach-dir-600-a1.c
ar71xx: add support for dlink dir-615-e1
2014-06-02 14:43:35 +00:00
mach-dir-615-c1.c
ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address
2015-01-28 19:19:47 +00:00
mach-dir-615-i1.c
ar71xx: add support for D-Link DIR-615 rev. Ix board
2015-07-07 13:48:39 +00:00
mach-dir-825-b1.c
ar71xx: dir-825-b1: use ath79_parse_ascii_mac helper
2013-09-20 16:41:32 +00:00
mach-dir-825-c1.c
ar71xx: fix WLAN 5 GHz LED init on dir-825-c1
2013-10-20 15:59:04 +00:00
mach-dlan-hotspot.c
ar71xx: add support for the devolo dLAN Hotspot
2015-11-21 21:24:18 +00:00
mach-dlan-pro-500-wp.c
ar71xx: add support for the devolo dLAN pro 500 Wireless+
2015-07-14 07:32:33 +00:00
mach-dlan-pro-1200-ac.c
ar71xx: fix AR8337 switch initialization on dLAN pro 1200+ WiFi ac
2016-01-19 10:16:11 +00:00
mach-dr344.c
ar71xx: Add support for Wallys DR344
2015-12-11 15:04:47 +00:00
mach-dragino2.c
ar71xx: Fix LED definitions for the DRAGINO2 board
2014-10-14 10:33:07 +00:00
mach-eap300v2.c
ar71xx: add kernel support for the EnGenius EAP300 v2 board
2014-07-14 21:30:26 +00:00
mach-eap7660d.c
ar71xx: add ALL0305 board alias
2012-08-22 12:33:22 +00:00
mach-el-m150.c
ar71xx: Fix the sys LEDs on the EasyLink M150 and mini
2014-11-14 16:58:29 +00:00
mach-el-mini.c
ar71xx: Fix the sys LEDs on the EasyLink M150 and mini
2014-11-14 16:58:29 +00:00
mach-epg5000.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-esr900.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-esr1750.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-ew-dorin.c
ar71xx: add status led found on ew-dorin boards
2015-05-10 07:47:04 +00:00
mach-f9k1115v2.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-gl-ar150.c
ar71xx: add GL-AR150 support V3
2015-11-24 18:29:59 +00:00
mach-gl-ar300.c
ar71xx: add GL-AR300 support V3
2015-11-24 18:30:19 +00:00
mach-gl-domino.c
ar71xx: add GL-Domino Pi support V3
2015-11-24 18:30:50 +00:00
mach-gl-inet.c
ar71xx: Fix GL.iNet WLAN LED
2014-07-21 19:26:46 +00:00
mach-gs-minibox-v1.c
ar71xx: Add Gainstrong MiniBox v1.0 support to trunk
2015-10-19 17:55:25 +00:00
mach-gs-oolite.c
ar71xx: oolite: the buttons are not active_low
2014-08-01 11:19:34 +00:00
mach-hiwifi-hc6361.c
ar71xx: add kernel support for HiWiFi HC6361.
2014-06-02 14:56:24 +00:00
mach-hornet-ub.c
Fix (invert/revert) Hornet-UB WPS LED state
2015-03-15 19:25:48 +00:00
mach-ja76pf.c
ar71xx: add support for the jjPlus JA76PF2 board
2012-03-16 18:00:34 +00:00
mach-jwap003.c
…
mach-mc-mac1200r.c
ar71xx: Add support for MERCURY MAC1200R
2015-02-09 12:16:51 +00:00
mach-mr12.c
ar71xx: Add support for the Meraki MR12 & MR16
2015-05-23 15:27:22 +00:00
mach-mr16.c
ar71xx: Add support for the Meraki MR12 & MR16
2015-05-23 15:27:22 +00:00
mach-mr18.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-mr600.c
ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board
2014-08-18 13:09:14 +00:00
mach-mr900.c
ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR900
2016-03-23 12:52:09 +00:00
mach-mr1750.c
ar71xx: Use PHY fixups for Open Mesh MR1750
2016-03-16 09:27:14 +00:00
mach-mynet-n600.c
ar71xx: my net n600: simplify LNA GPIO setup
2014-01-10 09:37:58 +00:00
mach-mynet-n750.c
ar71xx: mynet-n750: define LEDs connected to the AR8327 switch
2014-01-21 17:17:42 +00:00
mach-mynet-rext.c
ar71xx: fix 100/10mbps ethernet link issues on mynet range extender
2015-06-14 17:41:01 +00:00
mach-mzk-w04nu.c
…
mach-mzk-w300nh.c
…
mach-nbg460n.c
ar71xx: remove __dev{init,exit} annotations from kernel files
2013-02-19 20:52:06 +00:00
mach-nbg6716.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-om2p.c
ar71xx: fix reset button gpio for OM2P/OM2P-HS
2014-10-06 04:51:51 +00:00
mach-om5p.c
ar71xx: Increase RXD/RDV to 2 on OM5P-AN
2015-04-20 15:01:00 +00:00
mach-omy-x1.c
ar71xx: Add support for the OMYlink OMY-X1
2016-03-16 09:26:58 +00:00
mach-onion-omega.c
ar71xx: add support for Onion Omega
2015-07-24 09:09:49 +00:00
mach-pb42.c
…
mach-pb92.c
ar71xx: remove the built-in MTD map of the PB92 board
2012-03-27 19:38:05 +00:00
mach-qihoo-c301.c
ar71xx: qihoo: define flash variable as static
2015-02-07 19:59:02 +00:00
mach-r6100.c
Netgear R6100 support
2014-11-26 08:28:22 +00:00
mach-rb4xx.c
ar71xx: register the micro sd card reader on RB493G
2013-02-10 12:31:38 +00:00
mach-rb91x.c
ar71xx: rb91x: fix ethernet packet loss issues
2014-04-13 20:41:52 +00:00
mach-rb95x.c
ar71xx: rb95x: use correct SPI flash address
2014-03-12 12:52:39 +00:00
mach-rb750.c
ar71xx: Routerboard 751 Mac Address Offset Fix
2013-02-08 09:34:53 +00:00
mach-rb922.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-rb2011.c
ar71xx: rb2011: apply patch to file
2015-02-07 21:10:51 +00:00
mach-rbsxtlite.c
ar71xx: Add support for MikroTik RouterBOARD SXT Lite
2014-07-01 13:38:30 +00:00
mach-rw2458n.c
ar71xx: rw2458n - Use eeprom (art) from wifi card
2013-03-15 14:35:50 +00:00
mach-smart-300.c
add support for the NC-LINK SMART-300
2014-08-11 11:44:51 +00:00
mach-tellstick-znet-lite.c
ar71xx: add support for the Telldus TellStick ZNet Lite
2016-03-10 19:07:26 +00:00
mach-tew-632brp.c
ar71xx: TEW632BRP has buttons 'active low', fix board config
2013-07-28 10:23:22 +00:00
mach-tew-673gru.c
ar71xx: tew-673gru: use ath79_parse_ascii_mac helper
2013-09-20 16:41:34 +00:00
mach-tew-712br.c
ar71xx: tew-712br: use ath79_parse_ascii_mac helper
2013-09-20 16:41:36 +00:00
mach-tew-732br.c
ar71xx: add kernel support for the TEW-732BR board
2013-09-23 09:49:01 +00:00
mach-tew-823dru.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-tl-mr3x20.c
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
2012-11-05 13:23:27 +00:00
mach-tl-mr11u.c
ar71xx: improve kernel support for the TL-MR3040 v2
2013-09-25 18:42:10 +00:00
mach-tl-mr13u.c
ar71xx: Fix LED polarity for the TP-LINK TL-MR13U.
2015-03-10 13:26:50 +00:00
mach-tl-mr3020.c
ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards
2013-01-07 14:30:37 +00:00
mach-tl-wa701nd-v2.c
ar71xx: add support for TL-WA701ND v2
2015-01-20 15:48:07 +00:00
mach-tl-wa801nd-v3.c
ar71xx: Added support for TL-WA801NDv3
2016-02-12 08:30:28 +00:00
mach-tl-wa830re-v2.c
ar71xx: added support for TL-WA830RE V2
2014-07-13 07:12:22 +00:00
mach-tl-wa901nd-v2.c
…
mach-tl-wa901nd.c
ar71xx: fix tl-wa901nd buttons code
2013-08-05 09:09:39 +00:00
mach-tl-wa7210n-v2.c
ar71xx: TL-WA7210n v2 support
2015-02-24 12:00:50 +00:00
mach-tl-wax50re.c
ar71xx: add support for TP-LINK TL-WA860RE v1
2014-07-13 10:03:41 +00:00
mach-tl-wdr3320-v2.c
ar71xx: add TP-LINK TL-WDR3320 v2 support
2015-09-14 20:12:16 +00:00
mach-tl-wdr3500.c
ar71xx: fix ethernet LEDs on the TL-WDR3500
2013-03-25 06:40:03 +00:00
mach-tl-wdr4300.c
ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions
2015-03-15 19:39:47 +00:00
mach-tl-wdr6500-v2.c
ar71xx: register only the built-in switch MDIO bus, hook up eth0 to it, should hopefully fix regression reported in #21520
2016-02-07 21:00:11 +00:00
mach-tl-wr703n.c
ar71xx: fix typo in tl-wr710n mac setup (fixes #16469)
2014-05-24 08:01:33 +00:00
mach-tl-wr720n-v3.c
ar71xx: add support for TL-WR720N-v4.
2015-06-18 18:21:23 +00:00
mach-tl-wr741nd-v4.c
ar71xx: add support for WIFI button on tp-link tl-mr3220v2
2013-06-04 13:25:54 +00:00
mach-tl-wr741nd.c
…
mach-tl-wr841n-v8.c
ar71xx: add support for the TP-LINK TL-WR941ND v5
2015-02-04 06:10:20 +00:00
mach-tl-wr841n-v9.c
ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531)
2015-07-07 08:05:50 +00:00
mach-tl-wr841n.c
…
mach-tl-wr941nd-v6.c
ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)
2015-11-08 20:39:18 +00:00
mach-tl-wr941nd.c
…
mach-tl-wr1041n-v2.c
generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
2012-12-22 12:12:35 +00:00
mach-tl-wr1043nd-v2.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-tl-wr1043nd.c
ar71xx: init switch hw_reset on the TL-WR1043ND board
2012-08-02 09:54:28 +00:00
mach-tl-wr2543n.c
ar71xx: fix comment style in mach-tl-wr2543n.c
2012-08-22 12:42:59 +00:00
mach-tube2h.c
ar71xx: Ext LNA patch for TUBE2H and HORNET-UB targets
2015-03-12 10:06:53 +00:00
mach-ubnt-unifiac.c
ar71xx: Support for Ubiquiti UniFi AP AC LITE
2016-02-12 08:31:32 +00:00
mach-ubnt.c
…
mach-weio.c
ar71xx: Add WeIO Board Support
2015-09-24 09:08:47 +00:00
mach-whr-hp-g300n.c
ar71xx: remove the built-in MTD maps of several boards
2012-03-27 19:38:01 +00:00
mach-wlae-ag300n.c
ar71xx: Buffalo WLAE-AG300N initial support
2012-08-01 12:24:52 +00:00
mach-wlr8100.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-wndap360.c
ar71xx: WNDAP360 adding wifi LED support
2014-06-02 15:02:54 +00:00
mach-wndr3700.c
ar71xx: use netgear prefix for WNDR3700 LED names
2013-09-21 15:55:50 +00:00
mach-wndr4300.c
ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machines
2014-07-21 18:41:52 +00:00
mach-wnr2000-v3.c
ar71xx: WNR1000v2: fix for random WLAN MAC
2016-03-20 14:41:58 +00:00
mach-wnr2000-v4.c
ar71xx: do general formatting on wnr2000-v4
2015-05-08 12:24:30 +00:00
mach-wnr2000.c
ar71xx: use netgear prefix for WNR2000 LED names
2013-09-21 15:55:51 +00:00
mach-wnr2200.c
ar71xx: on wnr2200, revert the mac0/mac1, the ethernet interfaces are swapped. use MAC1 for wlan
2015-12-11 21:12:04 +00:00
mach-wp543.c
ar71xx: wp543: set active_low flag for the buttons
2014-01-26 14:55:32 +00:00
mach-wpe72.c
ar71xx: compex wpe72 add space to include statement
2015-07-09 07:04:14 +00:00
mach-wpj344.c
ar71xx: fix leds and gpio on wpj344
2015-04-29 20:04:46 +00:00
mach-wpj531.c
ar71xx: compex wpj531 register usb support
2015-07-09 07:03:54 +00:00
mach-wpj558.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-wrt160nl.c
ar71xx: rename wrt160nl's trx partition parser
2015-03-11 15:56:15 +00:00
mach-wrt400n.c
…
mach-wzr-450hp2.c
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
2016-03-16 09:27:08 +00:00
mach-wzr-hp-ag300h.c
ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
2013-07-14 14:05:27 +00:00
mach-wzr-hp-g300nh2.c
ar71xx: use uimage split for WZR-HP-G300NH2
2013-07-14 14:05:31 +00:00
mach-wzr-hp-g300nh.c
ar71xx: use uimage split for WZR-HP-G300NH
2013-07-14 14:05:23 +00:00
mach-wzr-hp-g450h.c
ath9k: merge initval and tx gain table updates, calibration fixes
2013-12-08 14:48:30 +00:00
mach-zcn-1523h.c
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
2012-11-04 22:08:54 +00:00
machtypes.h
ar71xx: Add support for the OMYlink OMY-X1
2016-03-16 09:26:58 +00:00
Makefile
ar71xx: Add support for the OMYlink OMY-X1
2016-03-16 09:26:58 +00:00
nvram.c
ar71xx: allow ath79_nvram_parse_mac_addr parsing mac with quotes
2014-07-13 19:43:54 +00:00
nvram.h
…
pci-ath9k-fixup.c
ar71xx: allow pci calibration fixup to work with ar9344
2015-07-07 13:46:44 +00:00
pci-ath9k-fixup.h
…
routerboot.c
ar71xx: routerboot: export extended wlan data via sysfs
2015-04-07 20:03:43 +00:00
routerboot.h
ar71xx: routerboot: add support for extended radio data
2015-04-07 20:03:35 +00:00