mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
add support for the NC-LINK SMART-300
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 42130
This commit is contained in:
parent
43029544e2
commit
ecba34a3ee
@ -160,6 +160,9 @@ get_status_led() {
|
||||
rw2458n)
|
||||
status_led="rw2458n:green:d3"
|
||||
;;
|
||||
smart-300)
|
||||
status_led="nc-link:green:system"
|
||||
;;
|
||||
oolite)
|
||||
status_led="oolite:red:system"
|
||||
;;
|
||||
|
@ -190,6 +190,15 @@ om5p)
|
||||
ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
|
||||
;;
|
||||
|
||||
smart-300)
|
||||
ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "nc-link:green:lan2" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "nc-link:green:lan3" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "nc-link:green:lan4" "switch0" "0x02"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "nc-link:green:wlan" "phy0tpt"
|
||||
;;
|
||||
|
||||
tew-712br)
|
||||
ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "trendnet:green:lan1" "switch0" "0x02"
|
||||
|
@ -199,6 +199,7 @@ tl-wr941nd)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
|
||||
smart-300 | \
|
||||
tl-mr3420-v2 |\
|
||||
tl-wr841n-v8 |\
|
||||
tl-wr842n-v2 |\
|
||||
|
@ -211,6 +211,9 @@ tplink_board_detect() {
|
||||
"453000"*)
|
||||
model="MERCURY MW4530R"
|
||||
;;
|
||||
"934100"*)
|
||||
model="NC-LINK SMART-300"
|
||||
;;
|
||||
*)
|
||||
hwver=""
|
||||
;;
|
||||
@ -514,6 +517,9 @@ ar71xx_board_detect() {
|
||||
*RW2458N)
|
||||
name="rw2458n"
|
||||
;;
|
||||
*"SMART-300")
|
||||
name="smart-300"
|
||||
;;
|
||||
*TEW-632BRP)
|
||||
name="tew-632brp"
|
||||
;;
|
||||
|
@ -27,6 +27,7 @@ set_preinit_iface() {
|
||||
rb-450g |\
|
||||
routerstation |\
|
||||
routerstation-pro |\
|
||||
smart-300 |\
|
||||
tl-mr3420-v2 |\
|
||||
tl-wdr4900-v2 |\
|
||||
tl-wr1043nd-v2 |\
|
||||
|
@ -257,6 +257,7 @@ platform_check_image() {
|
||||
el-mini | \
|
||||
gl-inet | \
|
||||
oolite | \
|
||||
smart-300 | \
|
||||
tl-mr10u | \
|
||||
tl-mr11u | \
|
||||
tl-mr13u | \
|
||||
|
@ -79,6 +79,7 @@ CONFIG_ATH79_MACH_PB92=y
|
||||
# CONFIG_ATH79_MACH_RB95X is not set
|
||||
# CONFIG_ATH79_MACH_RBSXTLITE is not set
|
||||
CONFIG_ATH79_MACH_RW2458N=y
|
||||
CONFIG_ATH79_MACH_SMART_300=y
|
||||
CONFIG_ATH79_MACH_TEW_632BRP=y
|
||||
CONFIG_ATH79_MACH_TEW_673GRU=y
|
||||
CONFIG_ATH79_MACH_TEW_712BR=y
|
||||
|
@ -80,6 +80,7 @@ CONFIG_ATH79_MACH_PB92=y
|
||||
# CONFIG_ATH79_MACH_RB95X is not set
|
||||
# CONFIG_ATH79_MACH_RBSXTLITE is not set
|
||||
CONFIG_ATH79_MACH_RW2458N=y
|
||||
CONFIG_ATH79_MACH_SMART_300=y
|
||||
CONFIG_ATH79_MACH_TEW_632BRP=y
|
||||
CONFIG_ATH79_MACH_TEW_673GRU=y
|
||||
CONFIG_ATH79_MACH_TEW_712BR=y
|
||||
|
135
target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
Normal file
135
target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
Normal file
@ -0,0 +1,135 @@
|
||||
/*
|
||||
* NC-LINK SMART-300 board support
|
||||
*
|
||||
* Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
#include <asm/mach-ath79/ag71xx_platform.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define SMART_300_GPIO_LED_WLAN 13
|
||||
#define SMART_300_GPIO_LED_WAN 18
|
||||
#define SMART_300_GPIO_LED_LAN4 19
|
||||
#define SMART_300_GPIO_LED_LAN3 12
|
||||
#define SMART_300_GPIO_LED_LAN2 21
|
||||
#define SMART_300_GPIO_LED_LAN1 20
|
||||
#define SMART_300_GPIO_LED_SYSTEM 15
|
||||
#define SMART_300_GPIO_LED_POWER 14
|
||||
|
||||
#define SMART_300_GPIO_BTN_RESET 17
|
||||
#define SMART_300_GPIO_SW_RFKILL 16
|
||||
|
||||
#define SMART_300_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define SMART_300_KEYS_DEBOUNCE_INTERVAL (3 * SMART_300_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define SMART_300_GPIO_MASK 0x007fffff
|
||||
|
||||
static const char *smart_300_part_probes[] = {
|
||||
"tp-link",
|
||||
NULL,
|
||||
};
|
||||
|
||||
static struct flash_platform_data smart_300_flash_data = {
|
||||
.part_probes = smart_300_part_probes,
|
||||
};
|
||||
|
||||
static struct gpio_led smart_300_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "nc-link:green:lan1",
|
||||
.gpio = SMART_300_GPIO_LED_LAN1,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "nc-link:green:lan2",
|
||||
.gpio = SMART_300_GPIO_LED_LAN2,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "nc-link:green:lan3",
|
||||
.gpio = SMART_300_GPIO_LED_LAN3,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "nc-link:green:lan4",
|
||||
.gpio = SMART_300_GPIO_LED_LAN4,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "nc-link:green:system",
|
||||
.gpio = SMART_300_GPIO_LED_SYSTEM,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "nc-link:green:wan",
|
||||
.gpio = SMART_300_GPIO_LED_WAN,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "nc-link:green:wlan",
|
||||
.gpio = SMART_300_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button smart_300_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = SMART_300_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = SMART_300_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init smart_300_setup(void)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
|
||||
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(smart_300_leds_gpio),
|
||||
smart_300_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(1, SMART_300_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(smart_300_gpio_keys),
|
||||
smart_300_gpio_keys);
|
||||
|
||||
ath79_register_m25p80(&smart_300_flash_data);
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
|
||||
|
||||
ath79_register_mdio(1, 0x0);
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
|
||||
|
||||
/* GMAC0 is connected to the PHY0 of the internal switch */
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_switch_data.phy_poll_mask = BIT(4);
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* GMAC1 is connected to the internal switch */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
ath79_register_eth(1);
|
||||
|
||||
ath79_register_wmac(ee, mac);
|
||||
|
||||
gpio_request(SMART_300_GPIO_LED_POWER, "power");
|
||||
gpio_direction_output(SMART_300_GPIO_LED_POWER, GPIOF_OUT_INIT_LOW);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_SMART_300, "SMART-300", "NC-LINK SMART-300",
|
||||
smart_300_setup);
|
15
target/linux/ar71xx/generic/profiles/nclink.mk
Normal file
15
target/linux/ar71xx/generic/profiles/nclink.mk
Normal file
@ -0,0 +1,15 @@
|
||||
#
|
||||
# Copyright (C) 2014 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/SMART-300
|
||||
NAME:=NC-LINK SMART-300
|
||||
endef
|
||||
|
||||
define Profile/SMART-300/Description
|
||||
Package set optimized for the NC-LINK SMART-300.
|
||||
endef
|
||||
$(eval $(call Profile,SMART-300))
|
@ -1203,6 +1203,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4
|
||||
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
|
||||
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
|
||||
|
||||
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
|
||||
|
||||
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
|
||||
|
||||
$(eval $(call SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
|
||||
|
@ -0,0 +1,38 @@
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -103,6 +103,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
|
||||
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
|
||||
ATH79_MACH_RW2458N, /* Redwave RW2458N */
|
||||
+ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
|
||||
ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
|
||||
ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
|
||||
ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -518,6 +518,15 @@ config ATH79_MACH_RBSXTLITE
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_ROUTERBOOT
|
||||
|
||||
+config ATH79_MACH_SMART_300
|
||||
+ bool "NC-LINK SMART-300 board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+
|
||||
config ATH79_MACH_WNDAP360
|
||||
bool "NETGEAR WNDAP360 board support"
|
||||
select SOC_AR71XX
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-
|
||||
obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
|
||||
obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
|
||||
obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
|
||||
+obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
|
||||
obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
|
||||
obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
|
||||
obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
|
@ -0,0 +1,38 @@
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -103,6 +103,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
|
||||
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
|
||||
ATH79_MACH_RW2458N, /* Redwave RW2458N */
|
||||
+ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
|
||||
ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
|
||||
ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
|
||||
ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -518,6 +518,15 @@ config ATH79_MACH_RBSXTLITE
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_ROUTERBOOT
|
||||
|
||||
+config ATH79_MACH_SMART_300
|
||||
+ bool "NC-LINK SMART-300 board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+
|
||||
config ATH79_MACH_WNDAP360
|
||||
bool "NETGEAR WNDAP360 board support"
|
||||
select SOC_AR71XX
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-
|
||||
obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
|
||||
obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
|
||||
obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
|
||||
+obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
|
||||
obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
|
||||
obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
|
||||
obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
|
Loading…
Reference in New Issue
Block a user