mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 00:41:17 +00:00
04d3308b62
This patch adds support for GL.iNet GL-B1300 Specification: - SOC: IPQ4028 / QCA Dakota - RAM: 256 MiB - FLASH: 32 MiB - ETH: Qualcomm Atheros QCA8075 Gigabit Switch (2 x LAN, 1 x WAN) - USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) - WLAN1: Qualcomm Atheros QCA4028 2.4GHz 802.11bgn 2:2x2 - WLAN2: Qualcomm Atheros QCA4028 5GHz 802.11a/n/ac 2:2x2 - INPUT: one reset and one WPS button - LEDS: 3 leds: Power, WIFI(only for 2.4G currently), and one reserved - UART: 1 x UART on PCB (3.3V, TX, RX, GND) - 115200 8N1 Installation: Method 1: - use serial port to stop uboot - uboot command: run lf Method 2: - push down reset button and power on - wait until three leds constantly on then release - upgrade by uboot web at http://192.168.1.1 Note: - the sysupgrade image need to be renamed to lede-gl-b1300.bin in both method. - the sysupgrade image can be automatically downloaded if tftp server at 192.168.1.2 have that file. - the wifi led will be flashing when writing image. Signed-off-by: Dongming Han <handongming@gl-inet.com>
308 lines
9.1 KiB
Makefile
308 lines
9.1 KiB
Makefile
# Copyright (c) 2014 The Linux Foundation. All rights reserved.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
|
|
KERNEL_PREFIX := $$(IMAGE_PREFIX)
|
|
KERNEL_LOADADDR = 0x42208000
|
|
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
|
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
|
IMAGE/sysupgrade.bin/squashfs :=
|
|
endef
|
|
|
|
define Device/LegacyImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
endef
|
|
|
|
define Device/FitImage
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/FitImageLzma
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/UbiFit
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES := nand-factory.ubi nand-sysupgrade.bin
|
|
IMAGE/nand-factory.ubi := append-ubi
|
|
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/DniImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
NETGEAR_BOARD_ID :=
|
|
NETGEAR_HW_ID :=
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := factory.img sysupgrade.bin
|
|
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | sysupgrade-tar kernel=$$$$@ | append-metadata
|
|
endef
|
|
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
|
|
|
define Device/TpSafeImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
TPLINK_BOARD_ID :=
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
|
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
|
|
endef
|
|
DEVICE_VARS += TPLINK_BOARD_ID
|
|
|
|
define Device/ZyXELImage
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none | pad-to $${KERNEL_SIZE}
|
|
KERNEL_NAME := zImage
|
|
IMAGES := sysupgrade.bin mmcblk0p5-rootfs.bin mmcblk0p4-kernel.bin
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
IMAGE/mmcblk0p5-rootfs.bin := append-rootfs | pad-rootfs | pad-to $$$${BLOCKSIZE}
|
|
IMAGE/mmcblk0p4-kernel.bin := append-kernel
|
|
endef
|
|
|
|
define Device/avm_fritzbox-4040
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_DTS := qcom-ipq4019-fritz4040
|
|
KERNEL_LOADADDR := 0x80208000
|
|
BLOCKSIZE := 4k
|
|
PAGESIZE := 256
|
|
BOARD_NAME := fritz4040
|
|
DEVICE_TITLE := AVM Fritz!Box 4040
|
|
IMAGE_SIZE := 29753344
|
|
IMAGES = sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := ipq-wifi-avm_fritzbox-4040 fritz-tffs fritz-caldata u-boot-fritz4040
|
|
endef
|
|
TARGET_DEVICES += avm_fritzbox-4040
|
|
|
|
define Device/linksys_ea8500
|
|
$(call Device/LegacyImage)
|
|
DEVICE_DTS := qcom-ipq8064-ea8500
|
|
PAGESIZE := 2048
|
|
BLOCKSIZE := 128k
|
|
KERNEL_SIZE := 3072k
|
|
KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakeroot-hdr
|
|
BOARD_NAME := ea8500
|
|
SUPPORTED_DEVICES += ea8500
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi
|
|
DEVICE_TITLE := Linksys EA8500
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += linksys_ea8500
|
|
|
|
define Device/netgear_d7800
|
|
$(call Device/DniImage)
|
|
DEVICE_DTS := qcom-ipq8064-d7800
|
|
KERNEL_SIZE := 2097152
|
|
NETGEAR_BOARD_ID := D7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := d7800
|
|
SUPPORTED_DEVICES += d7800
|
|
DEVICE_TITLE := Netgear Nighthawk X4 D7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += netgear_d7800
|
|
|
|
define Device/netgear_r7500
|
|
$(call Device/DniImage)
|
|
DEVICE_DTS := qcom-ipq8064-r7500
|
|
KERNEL_SIZE := 2097152
|
|
NETGEAR_BOARD_ID := R7500
|
|
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500
|
|
SUPPORTED_DEVICES += r7500
|
|
DEVICE_TITLE := Netgear Nighthawk X4 R7500
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500
|
|
|
|
define Device/netgear_r7500v2
|
|
$(call Device/DniImage)
|
|
DEVICE_DTS := qcom-ipq8064-r7500v2
|
|
KERNEL_SIZE := 2097152
|
|
NETGEAR_BOARD_ID := R7500v2
|
|
NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7500v2
|
|
SUPPORTED_DEVICES += r7500v2
|
|
DEVICE_TITLE := Netgear Nighthawk X4 R7500v2
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0 ath10k-firmware-qca988x
|
|
endef
|
|
TARGET_DEVICES += netgear_r7500v2
|
|
|
|
define Device/netgear_r7800
|
|
$(call Device/DniImage)
|
|
DEVICE_DTS := qcom-ipq8065-r7800
|
|
KERNEL_SIZE := 2097152
|
|
NETGEAR_BOARD_ID := R7800
|
|
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := r7800
|
|
SUPPORTED_DEVICES += r7800
|
|
DEVICE_TITLE := Netgear Nighthawk X4S R7800
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984
|
|
endef
|
|
TARGET_DEVICES += netgear_r7800
|
|
|
|
define Device/glinet_gl-b1300
|
|
DEVICE_TITLE := GL.iNet GL-B1300
|
|
BOARD_NAME := gl-b1300
|
|
DEVICE_DTS := qcom-ipq4019-gl-b1300
|
|
KERNEL_LOADADDR := 0x80208000
|
|
KERNEL_INSTALL := 1
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 26624k
|
|
$(call Device/FitImage)
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := ipq-wifi-glinet_gl-b1300
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-b1300
|
|
|
|
define Device/openmesh_a42
|
|
$(call Device/FitImageLzma)
|
|
DEVICE_DTS := qcom-ipq4019-a42
|
|
KERNEL_LOADADDR := 0x80208000
|
|
BLOCKSIZE := 64k
|
|
SUPPORTED_DEVICES := openmesh,a42
|
|
DEVICE_TITLE := OpenMesh A42
|
|
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
|
|
IMAGE_SIZE := 15616k
|
|
IMAGES = factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca4019 uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += openmesh_a42
|
|
|
|
define Device/qcom_ap-dk01.1-c1
|
|
DEVICE_TITLE := QCA AP-DK01.1-C1
|
|
BOARD_NAME := ap-dk01.1-c1
|
|
DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
|
|
KERNEL_LOADADDR := 0x80208000
|
|
KERNEL_INSTALL := 1
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 26624k
|
|
$(call Device/FitImage)
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := ath10k-firmware-qca4019
|
|
endef
|
|
TARGET_DEVICES += qcom_ap-dk01.1-c1
|
|
|
|
define Device/qcom_ap-dk04.1-c1
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
|
|
KERNEL_LOADADDR := 0x80208000
|
|
KERNEL_INSTALL := 1
|
|
KERNEL_SIZE := 4048k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap-dk04.1-c1
|
|
DEVICE_TITLE := QCA AP-DK04.1-C1
|
|
endef
|
|
TARGET_DEVICES += qcom_ap-dk04.1-c1
|
|
|
|
define Device/qcom_ipq8064-ap148
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
KERNEL_INSTALL := 1
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES += ap148
|
|
DEVICE_TITLE := Qualcomm AP148
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148
|
|
|
|
define Device/qcom_ipq8064-ap148-legacy
|
|
$(call Device/LegacyImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_DTS := qcom-ipq8064-ap148
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := ap148
|
|
SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
|
|
DEVICE_TITLE := Qualcomm AP148 (legacy)
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-ap148-legacy
|
|
|
|
define Device/qcom_ipq8064-db149
|
|
$(call Device/FitImage)
|
|
DEVICE_DTS := qcom-ipq8064-db149
|
|
KERNEL_INSTALL := 1
|
|
BOARD_NAME := db149
|
|
DEVICE_TITLE := Qualcomm DB149
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += qcom_ipq8064-db149
|
|
|
|
define Device/tplink_c2600
|
|
$(call Device/TpSafeImage)
|
|
DEVICE_DTS := qcom-ipq8064-c2600
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := c2600
|
|
SUPPORTED_DEVICES += c2600
|
|
TPLINK_BOARD_ID := C2600
|
|
DEVICE_TITLE := TP-Link Archer C2600
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
endef
|
|
TARGET_DEVICES += tplink_c2600
|
|
|
|
define Device/tplink_vr2600v
|
|
KERNEL_SUFFIX := -uImage
|
|
KERNEL = kernel-bin | append-dtb | uImage none
|
|
KERNEL_NAME := zImage
|
|
KERNEL_SIZE := 2097152
|
|
DEVICE_DTS := qcom-ipq8064-vr2600v
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
BOARD_NAME := vr2600v
|
|
SUPPORTED_DEVICES += vr2600v
|
|
DEVICE_TITLE := TP-Link Archer VR2600v
|
|
DEVICE_PACKAGES := ath10k-firmware-qca99x0
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += tplink_vr2600v
|
|
|
|
define Device/zyxel_nbg6817
|
|
DEVICE_DTS := qcom-ipq8065-nbg6817
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 64k
|
|
BOARD_NAME := nbg6817
|
|
SUPPORTED_DEVICES += nbg6817
|
|
DEVICE_TITLE := ZyXEL NBG6817
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
|
|
$(call Device/ZyXELImage)
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6817
|
|
|
|
$(eval $(call BuildImage))
|