mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
71a6f45fdf
The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with
two internal antennas integrated in the main PCB.
Hardware:
- SoC: Broadcom BCM6369
- CPU: dual core BMIPS4350 V3.1 @400Mhz
- RAM: 64 MB DDR
- Flash: 16 MB parallel NOR
- LAN switch: Broadcom BCM53115, 5x 1Gbit
- Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
- USB: 2x 2.0
- Buttons: 2x, 1 reset
- LEDs: 10x
- FXS: 2x
- UART: yes
Installation via CFE web UI:
1. Power off the router and make a temporal TX-RX shortcircuit on the
serial pins.
2. Power on the router and wait 3 or more seconds
3. Remove the TX-RX shortcircuit
4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the
firmware
5. Wait a few minutes for it to finish
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
|
||
|---|---|---|
| .. | ||
| bcm6318-comtrend-ar-5315u.dts | ||
| bcm6318.dtsi | ||
| bcm6328-comtrend-ar-5387un.dts | ||
| bcm6328.dtsi | ||
| bcm6358-huawei-hg556a-b.dts | ||
| bcm6358.dtsi | ||
| bcm6362-huawei-hg253s-v2.dts | ||
| bcm6362-netgear-dgnd3700-v2.dts | ||
| bcm6362.dtsi | ||
| bcm6368-comtrend-vr-3025u.dts | ||
| bcm6368-netgear-dgnd3700-v1.dts | ||
| bcm6368-netgear-dgnd3700.dtsi | ||
| bcm6368-netgear-dgnd3800b.dts | ||
| bcm6368-observa-vh4032n.dts | ||
| bcm6368.dtsi | ||
| bcm6369-netgear-evg2000.dts | ||
| bcm63167-sercomm-h500-s-lowi.dts | ||
| bcm63167-sercomm-h500-s-vfes.dts | ||
| bcm63167-sercomm-h500-s.dtsi | ||
| bcm63168-comtrend-vr-3032u.dts | ||
| bcm63168-sercomm-shg2500.dts | ||
| bcm63268.dtsi | ||