openwrt/target/linux/bmips
Daniel González Cabanelas 71a6f45fdf bmips: add support for Netgear EVG2000
The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with
two internal antennas integrated in the main PCB.

Hardware:
 - SoC: Broadcom BCM6369
 - CPU: dual core BMIPS4350 V3.1 @400Mhz
 - RAM: 64 MB DDR
 - Flash: 16 MB parallel NOR
 - LAN switch: Broadcom BCM53115, 5x 1Gbit
 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
 - USB: 2x 2.0
 - Buttons: 2x, 1 reset
 - LEDs: 10x
 - FXS: 2x
 - UART: yes

Installation via CFE web UI:
  1. Power off the router and make a temporal TX-RX shortcircuit on the
     serial pins.
  2. Power on the router and wait 3 or more seconds
  3. Remove the TX-RX shortcircuit
  4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the
     firmware
  5. Wait a few minutes for it to finish

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-11 09:54:52 +02:00
..
base-files/lib/upgrade bmips: add subtargets for each SoC 2023-04-10 10:04:08 +02:00
bcm6318 bmips: 6.1: refresh config and add missing symbols 2023-05-30 21:00:24 +02:00
bcm6328 bmips: 6.1: refresh config and add missing symbols 2023-05-30 21:00:24 +02:00
bcm6358 bmips: 6.1: refresh config and add missing symbols 2023-05-30 21:00:24 +02:00
bcm6362 bmips: 6.1: refresh config and add missing symbols 2023-05-30 21:00:24 +02:00
bcm6368 bmips: add support for Netgear EVG2000 2023-06-11 09:54:52 +02:00
bcm63268 bmips: 6.1: refresh config and add missing symbols 2023-05-30 21:00:24 +02:00
dts bmips: add support for Netgear EVG2000 2023-06-11 09:54:52 +02:00
files bmips: enet: add compatibility with kernel 6.1 2023-05-30 20:54:54 +02:00
image bmips: add support for Netgear EVG2000 2023-06-11 09:54:52 +02:00
patches-5.15 bmips: improve kernel patches 2023-05-17 18:25:40 +02:00
patches-6.1 kernel: bump 6.1 to 6.1.31 2023-06-02 21:23:12 +02:00
profiles bmips: add new target 2021-02-22 18:29:44 +01:00
Makefile bmips: enable testing kernel version with 6.1 version 2023-05-30 21:00:34 +02:00
modules.mk bmips: add LED kernel modules 2023-04-09 10:34:05 +02:00