Daniel González Cabanelas 71a6f45fdf bmips: add support for Netgear EVG2000 ... The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with two internal antennas integrated in the main PCB. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 16 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 2x 2.0 - Buttons: 2x, 1 reset - LEDs: 10x - FXS: 2x - UART: yes Installation via CFE web UI: 1. Power off the router and make a temporal TX-RX shortcircuit on the serial pins. 2. Power on the router and wait 3 or more seconds 3. Remove the TX-RX shortcircuit 4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>		2023-06-11 09:54:52 +02:00
..
base-files	bmips: add support for Netgear EVG2000	2023-06-11 09:54:52 +02:00
config-5.15	bmips: switch to generic bcma/ssb fallback SPROM	2023-04-23 12:18:35 +02:00
config-6.1	bmips: 6.1: refresh config and add missing symbols	2023-05-30 21:00:24 +02:00
target.mk