openwrt/target/linux/ar71xx/files/arch/mips/ath79
John Crispin 99c238ff15 ar71xx: Fix LED definitions for the DRAGINO2 board
This patch fixes LED definitions for the DRAGINO2 board.

1. It renames the Router/USB led to System, as it is now marked "SYS" on the board.
2. It gives control of the LAN and WAN leds and some other GPIOs to Linux.
3. It fixes the active_low property for the LAN and WAN leds.
4. It sets up WLAN, LAN and WAN leds in the UCI defaults.
5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 42897
2014-10-14 10:33:07 +00:00
..
dev-ap9x-pci.c ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-ap9x-pci.h ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-dsa.c
dev-dsa.h
dev-eth.c ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331 2014-09-07 09:45:32 +00:00
dev-eth.h ar71xx: add a helper function for setting up ETH_CFG register on QCA955x 2014-07-13 19:43:56 +00:00
dev-m25p80.c ar71xx: enable fast flash read on dual-flash devices 2013-01-29 19:12:25 +00:00
dev-m25p80.h
dev-nfc.c ar71xx: ar934x_nfc: fix memory initialization bug 2014-03-12 12:52:36 +00:00
dev-nfc.h ar71xx: add ath79_nfc_set_ecc_mode helper 2013-09-19 18:43:42 +00:00
mach-alfa-ap96.c ar71xx: add linux 3.14 support 2014-08-07 12:40:53 +00:00
mach-alfa-nx.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-all0258n.c ar71xx: remove the built-in MTD map of the ALL0258N 2012-07-03 15:24:01 +00:00
mach-all0315n.c ar71xx: all0315n: fix ethernet according to vendor info 2012-08-29 10:37:54 +00:00
mach-ap83.c
mach-ap96.c ar71xx: remove the built-in MTD map of the AP96 board 2012-03-27 19:38:07 +00:00
mach-ap113.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-ap132.c ar71xx: add kernel support for Atheros AP132 Reference Board 2013-01-29 19:12:30 +00:00
mach-archer-c7.c add support for the archer c5 2014-07-23 12:47:25 +00:00
mach-aw-nr580.c
mach-bhu-bxu2000n2-a.c ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board 2013-10-30 06:50:57 +00:00
mach-cap4200ag.c ar71xx: add support for the Senao CAP4200AG board 2012-10-27 08:55:38 +00:00
mach-carambola2.c ar71xx: update Carambola2 platform data 2014-08-04 14:46:52 +00:00
mach-dir-505-a1.c ar71xx: dir-505-a1: use ath79_parse_ascii_mac helper 2013-09-20 16:41:31 +00:00
mach-dir-600-a1.c ar71xx: add support for dlink dir-615-e1 2014-06-02 14:43:35 +00:00
mach-dir-615-c1.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-dir-825-b1.c ar71xx: dir-825-b1: use ath79_parse_ascii_mac helper 2013-09-20 16:41:32 +00:00
mach-dir-825-c1.c ar71xx: fix WLAN 5 GHz LED init on dir-825-c1 2013-10-20 15:59:04 +00:00
mach-dragino2.c ar71xx: Fix LED definitions for the DRAGINO2 board 2014-10-14 10:33:07 +00:00
mach-eap300v2.c ar71xx: add kernel support for the EnGenius EAP300 v2 board 2014-07-14 21:30:26 +00:00
mach-eap7660d.c ar71xx: add ALL0305 board alias 2012-08-22 12:33:22 +00:00
mach-el-m150.c ar71xx: r41348 is missing these files 2014-06-26 13:47:35 +00:00
mach-el-mini.c ar71xx: r41348 is missing these files 2014-06-26 13:47:35 +00:00
mach-esr900.c ar71xx: use ETH_ALEN for consistency 2014-08-25 06:35:58 +00:00
mach-esr1750.c ar71xx: add kernel support for EnGenius ESR1750 2014-07-13 19:43:57 +00:00
mach-ew-dorin.c ar71xx: ew-dorin: added router firmware generation 2012-08-01 12:24:57 +00:00
mach-gl-inet.c ar71xx: Fix GL.iNet WLAN LED 2014-07-21 19:26:46 +00:00
mach-gs-oolite.c ar71xx: oolite: the buttons are not active_low 2014-08-01 11:19:34 +00:00
mach-hiwifi-hc6361.c ar71xx: add kernel support for HiWiFi HC6361. 2014-06-02 14:56:24 +00:00
mach-hornet-ub.c ar71xx: fix ALFA NETWORK's name 2014-07-14 11:10:00 +00:00
mach-ja76pf.c ar71xx: add support for the jjPlus JA76PF2 board 2012-03-16 18:00:34 +00:00
mach-jwap003.c
mach-mr600.c ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board 2014-08-18 13:09:14 +00:00
mach-mynet-n600.c ar71xx: my net n600: simplify LNA GPIO setup 2014-01-10 09:37:58 +00:00
mach-mynet-n750.c ar71xx: mynet-n750: define LEDs connected to the AR8327 switch 2014-01-21 17:17:42 +00:00
mach-mynet-rext.c ar71xx: improve support for the My Net Wi-Fi Range Extender device 2013-11-29 20:18:44 +00:00
mach-mzk-w04nu.c
mach-mzk-w300nh.c
mach-nbg460n.c ar71xx: remove __dev{init,exit} annotations from kernel files 2013-02-19 20:52:06 +00:00
mach-nbg6716.c ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boards 2014-07-13 19:44:00 +00:00
mach-om2p.c ar71xx: fix reset button gpio for OM2P/OM2P-HS 2014-10-06 04:51:51 +00:00
mach-om5p.c ar71xx: add kernel support for the OpenMesh OM5P board 2014-07-20 17:30:32 +00:00
mach-pb42.c
mach-pb92.c ar71xx: remove the built-in MTD map of the PB92 board 2012-03-27 19:38:05 +00:00
mach-qihoo-c301.c ar71xx: add qihoo 360 c301 router support 2014-09-15 10:19:38 +00:00
mach-rb4xx.c ar71xx: register the micro sd card reader on RB493G 2013-02-10 12:31:38 +00:00
mach-rb91x.c ar71xx: rb91x: fix ethernet packet loss issues 2014-04-13 20:41:52 +00:00
mach-rb95x.c ar71xx: rb95x: use correct SPI flash address 2014-03-12 12:52:39 +00:00
mach-rb750.c ar71xx: Routerboard 751 Mac Address Offset Fix 2013-02-08 09:34:53 +00:00
mach-rb2011.c ar71xx: rb2011: define LEDs connected to the AR8327 switch 2014-01-20 10:23:01 +00:00
mach-rbsxtlite.c ar71xx: Add support for MikroTik RouterBOARD SXT Lite 2014-07-01 13:38:30 +00:00
mach-rw2458n.c ar71xx: rw2458n - Use eeprom (art) from wifi card 2013-03-15 14:35:50 +00:00
mach-smart-300.c add support for the NC-LINK SMART-300 2014-08-11 11:44:51 +00:00
mach-tew-632brp.c ar71xx: TEW632BRP has buttons 'active low', fix board config 2013-07-28 10:23:22 +00:00
mach-tew-673gru.c ar71xx: tew-673gru: use ath79_parse_ascii_mac helper 2013-09-20 16:41:34 +00:00
mach-tew-712br.c ar71xx: tew-712br: use ath79_parse_ascii_mac helper 2013-09-20 16:41:36 +00:00
mach-tew-732br.c ar71xx: add kernel support for the TEW-732BR board 2013-09-23 09:49:01 +00:00
mach-tl-mr3x20.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-tl-mr11u.c ar71xx: improve kernel support for the TL-MR3040 v2 2013-09-25 18:42:10 +00:00
mach-tl-mr13u.c ar71xx: add kernel support for TP-Link TL-MR13U 2013-09-19 17:52:41 +00:00
mach-tl-mr3020.c ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 2013-01-07 14:30:37 +00:00
mach-tl-wa830re-v2.c ar71xx: added support for TL-WA830RE V2 2014-07-13 07:12:22 +00:00
mach-tl-wa901nd-v2.c
mach-tl-wa901nd.c ar71xx: fix tl-wa901nd buttons code 2013-08-05 09:09:39 +00:00
mach-tl-wax50re.c ar71xx: add support for TP-LINK TL-WA860RE v1 2014-07-13 10:03:41 +00:00
mach-tl-wdr3500.c ar71xx: fix ethernet LEDs on the TL-WDR3500 2013-03-25 06:40:03 +00:00
mach-tl-wdr4300.c ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards 2014-01-24 17:40:17 +00:00
mach-tl-wr703n.c ar71xx: fix typo in tl-wr710n mac setup (fixes #16469) 2014-05-24 08:01:33 +00:00
mach-tl-wr720n-v3.c ar71xx: add kernel support for TPLINK WR720N v3 2013-04-26 17:00:48 +00:00
mach-tl-wr741nd-v4.c ar71xx: add support for WIFI button on tp-link tl-mr3220v2 2013-06-04 13:25:54 +00:00
mach-tl-wr741nd.c
mach-tl-wr841n-v8.c ar71xx: move TL-WA801ND v2 setup code 2013-12-15 21:34:17 +00:00
mach-tl-wr841n-v9.c ar71xx: add support for the TP-LINK TL-WR841N/ND v9 2014-04-07 08:00:02 +00:00
mach-tl-wr841n.c
mach-tl-wr941nd.c
mach-tl-wr1041n-v2.c generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 2012-12-22 12:12:35 +00:00
mach-tl-wr1043nd-v2.c ar71xx: TL-WR1043N/ND v2: Fix MAC address of WMAC 2014-08-18 13:10:00 +00:00
mach-tl-wr1043nd.c ar71xx: init switch hw_reset on the TL-WR1043ND board 2012-08-02 09:54:28 +00:00
mach-tl-wr2543n.c ar71xx: fix comment style in mach-tl-wr2543n.c 2012-08-22 12:42:59 +00:00
mach-tube2h.c ar71xx: add kernel support for the Tube2H board 2014-07-14 16:03:34 +00:00
mach-ubnt.c
mach-whr-hp-g300n.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-wlae-ag300n.c ar71xx: Buffalo WLAE-AG300N initial support 2012-08-01 12:24:52 +00:00
mach-wlr8100.c ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boards 2014-07-13 19:44:00 +00:00
mach-wndap360.c ar71xx: WNDAP360 adding wifi LED support 2014-06-02 15:02:54 +00:00
mach-wndr3700.c ar71xx: use netgear prefix for WNDR3700 LED names 2013-09-21 15:55:50 +00:00
mach-wndr4300.c ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machines 2014-07-21 18:41:52 +00:00
mach-wnr2000-v3.c ar71xx: use netgear prefix for WNR612 v2 LED names 2013-09-21 15:55:54 +00:00
mach-wnr2000.c ar71xx: use netgear prefix for WNR2000 LED names 2013-09-21 15:55:51 +00:00
mach-wnr2200.c ar71xx: use netgear prefix for WNR2200 LED names 2013-09-21 15:55:52 +00:00
mach-wp543.c ar71xx: wp543: set active_low flag for the buttons 2014-01-26 14:55:32 +00:00
mach-wpe72.c ar71xx: wpe72: set active_low flag for the reset button 2014-01-26 14:55:34 +00:00
mach-wrt160nl.c
mach-wrt400n.c
mach-wzr-hp-ag300h.c ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp 2013-07-14 14:05:27 +00:00
mach-wzr-hp-g300nh2.c ar71xx: use uimage split for WZR-HP-G300NH2 2013-07-14 14:05:31 +00:00
mach-wzr-hp-g300nh.c ar71xx: use uimage split for WZR-HP-G300NH 2013-07-14 14:05:23 +00:00
mach-wzr-hp-g450h.c ath9k: merge initval and tx gain table updates, calibration fixes 2013-12-08 14:48:30 +00:00
mach-zcn-1523h.c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 2012-11-04 22:08:54 +00:00
nvram.c ar71xx: allow ath79_nvram_parse_mac_addr parsing mac with quotes 2014-07-13 19:43:54 +00:00
nvram.h
pci-ath9k-fixup.c ar71xx: remove superfluous include of asm/mach-ath79/pci.h 2012-06-19 10:13:43 +00:00
pci-ath9k-fixup.h
routerboot.c ar71xx: add some RouterBOOT specific helper functions 2013-12-16 10:11:01 +00:00
routerboot.h ar71xx: add some RouterBOOT specific helper functions 2013-12-16 10:11:01 +00:00