openwrt/package/boot/uboot-envtools/files
Mikhail Zhilkin 1ec1aa9cc7 ramips: add support for netis N6
This commit adds support for netis N6 WiFi 6 router.

Specification
-------------
- SoC       : MediaTek MT7621AT, MIPS, 880 MHz
- RAM       : 256 MiB
- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)
- WLAN      : MT7905DAN + MT7975DN
  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2
  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2
- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)
- USB       : 1x 3.0
- UART      : 3.3V, 115200n8
- Buttons   : 1x Reset
              1x WPS
- LEDs      : 1x Power (green)
              1x System (green)
              1x WAN (green)
              1x WiFi 2.4 GHz (green), controlled by phy
              1x WiFi 5 GHz (green), controlled by phy
              1x WPS (green)
              1x USB (green)
              5x ethernet leds (green), controlled by switch
- Power     : 12 VDC, 1.5 A

Installation
------------
1. Update the router using stock firmware web interface and OpenWrt
   factory.bin image.

Recovery and return to stock
----------------------------
1. Assign your PC a static IP 192.168.1.2 and connect to the router using
   the ethernet cable;
2. Power off the router;
3. Press Reset button, power on the router and wait until ethernet led
   start blinking;
4. Release the button;
5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;
6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed
   with upgrade.

MAC addresses
-------------
+---------+-------------------+
|         | MAC example       |
+---------+-------------------+
| LAN     | dc:xx:xx:49:xx:04 |
| WAN     | dc:xx:xx:49:xx:05 |
| WLAN 2g | dc:xx:xx:19:xx:06 |
| WLAN 5g | dc:xx:xx:79:xx:06 |
+---------+-------------------+
The WLAN MAC prototype was found in 'Factory', 0x4
The LAN MAC was found in 'Factory', 0x7ef20
The WAN MAC was found in 'Factory', 0x7ef26

Known issue
-----------
2.4 GHz WLAN doesn't start with mt76 driver.

Probable reason:
   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).
   Other routers with the same WLAN hardware (e.g., Routerich AX1800)
   have MT_EE_WIFI_CONF = 0x92.

Workaround (already included in this commit):
   Extract EEPROM to a file at the first time boot and change
   MT_EE_WIFI_CONF (offset 0x190) value from 0xd2 to 0x92. See
   /etc/hotplug.d/firmware/11-mt76-caldata for details.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16322
(cherry picked from commit f368e2d5ec)
[ Fix merging onflicts in mt7621.mk, 10_fix_wifi_mac, platform.sh ]
[ Change &ethphy4 -> &mdio in dts file ]
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16436
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-08 22:16:44 +02:00
..
apm821xx apm821xx: MBL: make mtd chip work 2022-06-19 12:31:02 +02:00
ath79 ath79: add support for Huawei AP5030DN 2024-04-03 02:56:56 +02:00
cns3xxx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
fw_printsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
fw_setsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
imx_cortexa7 uboot-envtools: imx: cortexa7: add TechNexion PICO-PI-IMX7D 2022-07-11 14:28:03 +02:00
imx_cortexa9 uboot-envtools: move imx to imx_cortexa9 2021-11-03 12:45:40 +01:00
ipq40xx uboot-envtools: ipq40xx: fix WHW03V2 mtd partition 2023-01-18 00:07:30 +01:00
ipq806x ipq806x: add support for Nokia Airscale AC400i 2023-03-19 18:02:34 +01:00
ipq807x ipq807x: add initial support for prpl Foundation Haze board 2023-06-12 22:10:29 +02:00
kirkwood kirkwood: add ix4-200d support to uboot-envtools 2024-03-23 14:58:33 +01:00
lantiq uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
layerscape layerscape: remove Traverse LS1043 boards 2023-07-26 13:36:58 +02:00
mediatek_filogic filogic: Add support for D-Link AQUILA PRO AI M30 2024-07-08 23:06:38 +02:00
mediatek_mt7622 mediatek: Add support for D-Link EAGLE PRO AI R32 2024-07-06 18:32:57 +02:00
mediatek_mt7623 uboot-envtools: add configuration for UniElec U7623 board 2022-01-23 20:20:42 +00:00
mediatek_mt7629 mediatek: add support for Netgear EX6250v2 series 2023-07-13 12:05:28 +01:00
mpc85xx mpc85xx: add support for Enterasys WS-AP3715i 2023-04-08 14:41:01 +02:00
mvebu mvebu: add support for Buffalo LinkStation LS220DE 2023-02-26 22:22:48 +01:00
mxs uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
oxnas uboot-envtools: oxnas: fix wrong eraseblock size for shuttle,kd20 2022-03-21 20:16:16 +00:00
pistachio uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
qoriq qoriq: add support for WatchGuard Firebox M300 2021-12-21 21:37:46 +02:00
ramips ramips: add support for netis N6 2024-10-08 22:16:44 +02:00
realtek uboot-envtools: add support for APRESIA ApresiaLightGS120GT-SS 2023-02-13 12:22:17 +01:00
uboot-envtools.sh uboot-envtools: add support for multiple config partitions 2021-04-08 09:20:59 +02:00