Mikhail Zhilkin 1ec1aa9cc7 ramips: add support for netis N6 ... This commit adds support for netis N6 WiFi 6 router. Specification ------------- - SoC : MediaTek MT7621AT, MIPS, 880 MHz - RAM : 256 MiB - Flash : NAND 128 MiB (ESMT PSU1GA30DT) - WLAN : MT7905DAN + MT7975DN - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2 - 5 GHz : a/n/ac/ax, 1201 Mbps, MIMO 2x2 - Ethernet : 10/100/1000 Mbps x5 (1x WAN, 4x LAN) - USB : 1x 3.0 - UART : 3.3V, 115200n8 - Buttons : 1x Reset 1x WPS - LEDs : 1x Power (green) 1x System (green) 1x WAN (green) 1x WiFi 2.4 GHz (green), controlled by phy 1x WiFi 5 GHz (green), controlled by phy 1x WPS (green) 1x USB (green) 5x ethernet leds (green), controlled by switch - Power : 12 VDC, 1.5 A Installation ------------ 1. Update the router using stock firmware web interface and OpenWrt factory.bin image. Recovery and return to stock ---------------------------- 1. Assign your PC a static IP 192.168.1.2 and connect to the router using the ethernet cable; 2. Power off the router; 3. Press Reset button, power on the router and wait until ethernet led start blinking; 4. Release the button; 5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser; 6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed with upgrade. MAC addresses ------------- +---------+-------------------+ | | MAC example | +---------+-------------------+ | LAN | dc:xx:xx:49:xx:04 | | WAN | dc:xx:xx:49:xx:05 | | WLAN 2g | dc:xx:xx:19:xx:06 | | WLAN 5g | dc:xx:xx:79:xx:06 | +---------+-------------------+ The WLAN MAC prototype was found in 'Factory', 0x4 The LAN MAC was found in 'Factory', 0x7ef20 The WAN MAC was found in 'Factory', 0x7ef26 Known issue ----------- 2.4 GHz WLAN doesn't start with mt76 driver. Probable reason: Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2). Other routers with the same WLAN hardware (e.g., Routerich AX1800) have MT_EE_WIFI_CONF = 0x92. Workaround (already included in this commit): Extract EEPROM to a file at the first time boot and change MT_EE_WIFI_CONF (offset 0x190) value from 0xd2 to 0x92. See /etc/hotplug.d/firmware/11-mt76-caldata for details. Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16322 (cherry picked from commit f368e2d5ec) [ Fix merging onflicts in mt7621.mk, 10_fix_wifi_mac, platform.sh ] [ Change &ethphy4 -> &mdio in dts file ] Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16436 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2024-10-08 22:16:44 +02:00
..
files	ramips: add support for netis N6	2024-10-08 22:16:44 +02:00
patches	uboot-envtools: update to 2022.07	2022-09-02 23:13:53 +02:00
Makefile	uboot-envtools: update to 2023.04	2023-04-11 17:24:29 +02:00