These options are not recognized by the valgrind configure script,
remove them.
Link: https://github.com/openwrt/openwrt/pull/16633
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The valgrind configure script checks if host_cpu is set to armv7 or arm.
By default --host is set to arm-openwrt-linux and the host_cpu variable
is set to arm. Then the valgrind build tries to compile valgrind for
armv6 and fails. Set it explicitly to armv7 to compile valgrind with
armv7 support.
Fixes: 1a55d90320 ("valgrind: Update to version 3.23")
Link: https://github.com/openwrt/openwrt/pull/16633
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
mutex_destroy is not called in any error paths or in _remove. Just use
devm to do so.
Removed a pointless platform_set_devdata call. Not needed with all of
the devm conversions.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16630
Signed-off-by: Robert Marko <robimarko@gmail.com>
Also use devm for gpiochip_add_data.
Allows completely removing the _remove function.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16622
Signed-off-by: Robert Marko <robimarko@gmail.com>
Specification
-------------
- SoC : Qualcomm IPQ4019
- RAM : 256 MiB DDR3 (NT5CC128M16JR-EK)
- Flash : 64 MiB SPI NOR (Winbond W25Q512JVFQ)
- WLAN : IPQ4019 built-in
- 2.4 GHz : 2x2 MIMO WiFi4
- 5 GHz : 2x2 MIMO WiFi5
- Ethernet : QCA8075 10/100/1000 Mbps 1x WAN (ETH1, PoE); 1x LAN (ETH2)
- USB : 1x 2.0 Type-A
- UART : 3.3V, 115200n8
- Buttons : 1x Reset
- LEDs : 1x RUN (lime & red)
1x WiFi 2.4 GHz (lime)
1x WiFi 5 GHz (lime)
2x ETH (lime), controlled by the QCA8075 phy
- Power : DC 12V & 802.3at PoE
- FCC ID : 2AHKT-WIA3300-20
- TFTP IP :
- client : 192.168.18.254
- router : 192.168.18.1
Installation
------------
1. Open uart console and start TFTP server. Copy initramfs image to
the TFTP root directory and rename it to 'ipqinitramfs.bin'.
2. Power on and press 'Enter' to exit to the u-boot console according
to the TTL log prompt.
3. Execute commands to load the initramfs image:
tftpboot && bootm
4. Enter into OpenWrt to backup the partitions if you want to restore
the stock firmware one day.
5. Override default 'bootcmd' environment variable in u-boot console:
env set bootcmd 'sf probe && sf read $loadaddr 0x980000 0x800000 && bootm $loadaddr'
env save
6. Repeat step 3 and flash 'sysupgrade' image in OpenWrt.
Recovery and return to stock
----------------------------
1. Restore the backup firmware partitions in the installation step 4.
2. Restore `bootcmd` environment variable via commands:
env set bootcmd bootipq && env save
MAC addresses
-------------
+---------+-------------------+
| | MAC example |
+---------+-------------------+
| LABEL | xx:xx:xx:xx:xx:25 |
| LAN | xx:xx:xx:xx:xx:26 |
| WAN | xx:xx:xx:xx:xx:25 |
| WLAN 2g | xx:xx:xx:xx:xx:28 |
| WLAN 5g | xx:xx:xx:xx:xx:29 |
+---------+-------------------+
Notice
-----------
1. Some CH340 USB-TTL module doesn't work on this device.
2. The 'firmware' partition consists of four parts in the vendor
layout:
* Name Start Size
* rootfs 0x980000 0x1680000
* 0:HLOS1 0x2000000 0x800000
* rootfs_1 0x2800000 0x1400000
* rootfs_data 0x3c00000 0x350000
3. User can control the USB power supply via commands:
echo enabled > /sys/devices/platform/output-usb-power/state
echo disabled > /sys/devices/platform/output-usb-power/state
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>
It can be used to control the power on/off status for the fixed
voltage regulator via sysfs.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>
dcbab62 ipq40xx: add BDFs for SKSpruce WIA3300-20
A new board file package "ipq-wifi-skspruce_wia3300-20" will be
added for the incoming device SKSpruce WIA3300-20.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>
Allows remove the _remove function as devm calls mutex_destroy
automatically.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16615
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use most recent version of the Intel AX101 and AX210 firmware provided
by linux-firmware and supported the driver used in OpenWrt.
Link: https://github.com/openwrt/openwrt/pull/16621
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Even though optional is used, there's are still pointless NULL
assignments.
Use dev_err_probe to avoid manually handling EPROBE_DEFER.
Use devm_platform_iomap_resource. No struct resource needed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Shiji Yang <yangshiji66@qq.com> on NETGEAR R6100.
Link: https://github.com/openwrt/openwrt/pull/16519
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
...conversion.
Commit 20736013e9 ("kernel: backport nvmem v6.6 fixes and v6.7 changes")
has causedt he device to no longer correctly read MAC address from its
onboard 24c64 EEPROM, because "at24" driver doesn't support legacy
nvmem-cell bindings [1] - and there was an explicit config option added
to mandate that behaviour in the following patch:
820-v6.7-0002-nvmem-add-explicit-config-option-to-read-old-syntax-.patch
But some of the devices, MR33 and MR74 included, weren't converted with
that as well.
Convert the definition to use proper fixed-layout binding to fix it.
The offending change was introduced between v23.05.0 and v23.05.1, and
found by bisection:
git bisect start
# status: waiting for both good and bad commits
# good: [bd4f415efa] OpenWrt v23.05.0: adjust config defaults
git bisect good bd4f415efa
# status: waiting for bad commit, 1 good commit known
# bad: [a58a86693f] OpenWrt v23.05.1: adjust config defaults
git bisect bad a58a86693f
# good: [3d0a78add2] qualcommax: only build initramfs if CONFIG_TARGET_ROOTFS_INITRAMFS is set
git bisect good 3d0a78add2
# bad: [21e5db97c4] build: add CycloneDX SBOM JSON support
git bisect bad 21e5db97c4
# good: [89184b15cf] mediatek: add build for MT7981 RFB
git bisect good 89184b15cf
# bad: [41f27bbb6d] bcm53xx: add the latest fix version of brcm_nvram
git bisect bad 41f27bbb6d
# good: [b649b0bf71] kernel: nvmem: fix "fixed-layout" & support "mac-base"
git bisect good b649b0bf71
# bad: [20736013e9] kernel: backport nvmem v6.6 fixes and v6.7 changes
git bisect bad 20736013e9
# good: [066971615f] kernel: backport v6.6 nvmem changes
git bisect good 066971615f
# first bad commit: [20736013e9] kernel: backport nvmem v6.6 fixes and v6.7 changes
Link: [1] https://github.com/openwrt/openwrt/issues/15393#issuecomment-2212300849
Fixes: 20736013e9 ("kernel: backport nvmem v6.6 fixes and v6.7 changes")
Fixes: https://github.com/openwrt/openwrt/issues/15393
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16623
Signed-off-by: Robert Marko <robimarko@gmail.com>
Avoids needing to call mutex_destroy in error paths, which is missing
anyway.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16620
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update channels when country set.
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16613
Signed-off-by: Robert Marko <robimarko@gmail.com>
Only replace LED state of a single LED instead of removing the entire
/var/run/led.state file.
Fixes: 511e8f84d0 ("base-files: configure LED when added")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Bump to the latest 1.22 version which allows dropping our only patch.
Changelog:
Version 1.22
* The CMake-based build system now implements a workaround for gcc being paired
with a too-old binutils version. This can prevent build errors.
Version 1.21
* Fixed build error on x86 with gcc 8.1 and gcc 8.2.
* Fixed build error on x86 when gcc 11 is paired with a binutils version that
doesn't support AVX-VNNI, e.g. as it is on RHEL 9.
* Fixed build error on arm64 with gcc 6.
* Fixed build error on arm64 with gcc 13.1 and later with some -mcpu options.
* Enabled detection of dotprod support in Windows ARM64 builds.
Link: https://github.com/openwrt/openwrt/pull/16617
Signed-off-by: Robert Marko <robimarko@gmail.com>
Trying to compile ath10k-ct without mac80211 debugfs support will result in:
openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/linux-ipq806x_generic/ath10k-ct-regular/ath10k-ct-2024.07.30~ac71b14d/ath10k-6.10/wmi.h:8083:2: error: #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware. [-Werror=cpp]
8083 | #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware.
| ^~~~~~~
cc1: all warnings being treated as errors
So, since the driver itself is saying that debugfs is required, then
lets make ath10k-ct select mac80211 debugfs support which is selected
by default anyway.
Fixes: #16302
Link: https://github.com/openwrt/openwrt/pull/16619
Signed-off-by: Robert Marko <robimarko@gmail.com>
Disable for host to avoid having to use rpath hacks.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16586
Signed-off-by: Robert Marko <robimarko@gmail.com>
The u-boot,env driver does not have layout in compatible.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16616
Signed-off-by: Robert Marko <robimarko@gmail.com>
Kick to version 92 - that already support station
MLO correctly.
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16558
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This can happen if the bridge or a stacked vlan device gets recreated.
Ensure that hostapd sees the change and handles it gracefully.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mac80211 driver backport has been updated to version 6.11. Let's
also push ath10k-ct driver forward. The unsupported feature
'NL80211_EXT_FEATURE_ETHTOOL_VDEV_STATS' has been dropped since it
looks like something for debugging and not supported by the mainline.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16514
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
In the case of multi-core compilation, the warning prompts to add a "+" sign.
````
warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
`````
Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16598
Signed-off-by: Robert Marko <robimarko@gmail.com>
Allows removal of _remove function.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16587
Signed-off-by: Robert Marko <robimarko@gmail.com>
This fixes the build of the gemini and the apm821xx target.
The e2fsck application returns an error code now and that makes the
build fail. The tune2fs command adds an extra option and the e2fsck
should later fix the file system. It is intentionally broken in this
place.
e2fsprogs was patched before to ignore this error.
Fixes: 95e4664b5e ("tools: e2fsprogs: drop e2fsck patch")
Link: https://github.com/openwrt/openwrt/pull/16607
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Use the absolute path to access the e2fsprogs applications. It is also
working with relative paths, but this makes sure that we use our
versions.
Link: https://github.com/openwrt/openwrt/pull/16607
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Changes:
fa05d58e (tag: libnl3_10_0) libnl-3.10.0 release
490ffa07 python: fix flake8 warnings
6fc66dd8 doc: workaround LINK_DOC with empty libnl.dict
914812a9 lib: avoid overflow in computation of s_seq_next
5248e1a4 all: fix and enable "-Wsign-compare" warning
9451842e build: use AC_USE_SYSTEM_EXTENSIONS instead of defining _GNU_SOURCE
20664e1e build: move "-DPGKLIBDIR" and rename
81cab7da build: cleanup defining SYSCONFDIR on command line
cf47571c build: drop unnecessary "-Wno-missing-field-initializers" from default CFLAGS
131008f7 build: add "-Wvla" and "-Wdeclaration-after-statement" to default CFLAGS
7e05b622 lib: add internal _nla_len() helper
32688201 route: treat routes with via nexthops as universe scoped as well
c36c7faa format: reformat "include/base/nl-base-utils.h"
49f78229 tests: add a very basic test for route cache
2ebbc034 tests: add NLTstSelectRoute test helper
d784f2cb tests: set NLTST_IN_CI for not skipping tests accidentally
dcb9e2ef route: add missing priority to route_keygen() debug print
d44505ed tests: add helper to detect availablility of iproute2
774863b4 tests: add helper functions for tests
45a10f96 route: move "struct rtnl_nexthop" to "nl-priv-dynamic-route"
153f213b build: fix "check-progs" target in "Makefile.am"
a1e0b8b2 github: print test-suite.log in case of test failure
3e080631 route: expose nexthop id attribute
401c2488 tests: fix _nltst_object_to_string() to print one line only
529c2ab8 route: drop unused fields from "struct rtnl_route"
71e59e14 build: separate build tests from unit tests
8539b7d3 format: reformat "tests/nl-test-util.h" file
6db85366 route: merge branch 'bisdn:jogo_route_nh_cmp'
861fb809 route: use the new helper function for comparing nexthops
8cf29d7b nexthop: add a identical helper function
7cc72d19 utils: reserve the nl_has_capabiliy numbers for releases 3.10 - 3.12
30da5107 github,clang-format: update fedora version for clang-format
2301992b route: fix IPv6 ecmp route deleted nexthop matching
72e4d73f cache: merge branch 'ievenbach:aurora/cache-mgr-cb'
3381acef cache: use cleanup attribute in nl_cache_mngr_alloc_ex()
32cb9f39 cache: cleanup nl_cache_mngr_alloc_ex()
1dbdc30a cache: allow to allocate cache manager with custom refill socket
18b74e08 tests: test compiling all public headers with C++ compiler
691202bf tests: don't use $COMPILE for building header tests
15d90cbf include: add _NL_NO_WARN_DEPRECATED_HEADER for suppressing warning about deprecated headers
8a5f671a tests: avoid "-Wunused-parameter" warning in build headers test
db1a9d7d route: avoid compiler warning about calloc() arguments in rtnl_netem_set_delay_distribution()
3a43faa1 cache: fix new object in callback v2 on updated objects
46cae1bf socket: fix ubsan complaint about incorrect left-shift in generate_local_port()
96ddcd99 all: merge branch 'th/nl-debug'
13ab0122 github: test with --enable-debug=no configure option
264b244e utils: always define nl_debug_dp
dbe21b8d core: always define statements for NL_DBG()
e592dd89 build: always define NL_DEBUG
58734974 all: use defines for attributes
0c16c9cb route/bison: include "nl-default.h" in lex/yacc files
19d48b0f route: add support for layer 3 filtering on bridges
3646398d route: merge branch 'Cordell-O:main'
e21278ed tests: add test for bridge vlan attributes.
4f324f73 route: add support for vlan filtering on bridge ports.
bf071f2b route: Add support to set ageing time for dynamic bridge table entries
b76c3a5d tests: add unit test for `nl_addr_parse("default", AF_INET6, &addr6)`
8693347f lib/xfrm: add missing #include <time.h>
Small size increase:
955 bin/packages/mips_24kc-old/base/libnl200_3.9.0-r1_mips_24kc.ipk
11157 bin/packages/mips_24kc-old/base/libnl-cli200_3.9.0-r1_mips_24kc.ipk
34896 bin/packages/mips_24kc-old/base/libnl-core200_3.9.0-r1_mips_24kc.ipk
7698 bin/packages/mips_24kc-old/base/libnl-genl200_3.9.0-r1_mips_24kc.ipk
25400 bin/packages/mips_24kc-old/base/libnl-nf200_3.9.0-r1_mips_24kc.ipk
148366 bin/packages/mips_24kc-old/base/libnl-route200_3.9.0-r1_mips_24kc.ipk
956 bin/packages/mips_24kc-new/base/libnl200_3.10.0-r1_mips_24kc.ipk
11154 bin/packages/mips_24kc-new/base/libnl-cli200_3.10.0-r1_mips_24kc.ipk
34965 bin/packages/mips_24kc-new/base/libnl-core200_3.10.0-r1_mips_24kc.ipk
7699 bin/packages/mips_24kc-new/base/libnl-genl200_3.10.0-r1_mips_24kc.ipk
25385 bin/packages/mips_24kc-new/base/libnl-nf200_3.10.0-r1_mips_24kc.ipk
149852 bin/packages/mips_24kc-new/base/libnl-route200_3.10.0-r1_mips_24kc.ipk
Link: https://github.com/openwrt/openwrt/pull/16592
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Set compatible string and specify redundant type U-boot environment.
Fixes: fea2264d9f ("ramips: mt7621: Add DNA Valokuitu Plus EX400")
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/openwrt/openwrt/pull/16573
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Enable above drivers for mt7621 targets. They are needed for retrieving a MAC
address stored in a U-boot environment residing on an UBI volume.
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/openwrt/openwrt/pull/16573
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently LED configuration is only carried out once during boot.
Apply LED configuration also with a hotplug call when a new LED gets
added later.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
