mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
ipq40xx: add support for SKSpruce WIA3300-20
Specification
-------------
- SoC : Qualcomm IPQ4019
- RAM : 256 MiB DDR3 (NT5CC128M16JR-EK)
- Flash : 64 MiB SPI NOR (Winbond W25Q512JVFQ)
- WLAN : IPQ4019 built-in
- 2.4 GHz : 2x2 MIMO WiFi4
- 5 GHz : 2x2 MIMO WiFi5
- Ethernet : QCA8075 10/100/1000 Mbps 1x WAN (ETH1, PoE); 1x LAN (ETH2)
- USB : 1x 2.0 Type-A
- UART : 3.3V, 115200n8
- Buttons : 1x Reset
- LEDs : 1x RUN (lime & red)
1x WiFi 2.4 GHz (lime)
1x WiFi 5 GHz (lime)
2x ETH (lime), controlled by the QCA8075 phy
- Power : DC 12V & 802.3at PoE
- FCC ID : 2AHKT-WIA3300-20
- TFTP IP :
- client : 192.168.18.254
- router : 192.168.18.1
Installation
------------
1. Open uart console and start TFTP server. Copy initramfs image to
the TFTP root directory and rename it to 'ipqinitramfs.bin'.
2. Power on and press 'Enter' to exit to the u-boot console according
to the TTL log prompt.
3. Execute commands to load the initramfs image:
tftpboot && bootm
4. Enter into OpenWrt to backup the partitions if you want to restore
the stock firmware one day.
5. Override default 'bootcmd' environment variable in u-boot console:
env set bootcmd 'sf probe && sf read $loadaddr 0x980000 0x800000 && bootm $loadaddr'
env save
6. Repeat step 3 and flash 'sysupgrade' image in OpenWrt.
Recovery and return to stock
----------------------------
1. Restore the backup firmware partitions in the installation step 4.
2. Restore `bootcmd` environment variable via commands:
env set bootcmd bootipq && env save
MAC addresses
-------------
+---------+-------------------+
| | MAC example |
+---------+-------------------+
| LABEL | xx:xx:xx:xx:xx:25 |
| LAN | xx:xx:xx:xx:xx:26 |
| WAN | xx:xx:xx:xx:xx:25 |
| WLAN 2g | xx:xx:xx:xx:xx:28 |
| WLAN 5g | xx:xx:xx:xx:xx:29 |
+---------+-------------------+
Notice
-----------
1. Some CH340 USB-TTL module doesn't work on this device.
2. The 'firmware' partition consists of four parts in the vendor
layout:
* Name Start Size
* rootfs 0x980000 0x1680000
* 0:HLOS1 0x2000000 0x800000
* rootfs_1 0x2800000 0x1400000
* rootfs_data 0x3c00000 0x350000
3. User can control the USB power supply via commands:
echo enabled > /sys/devices/platform/output-usb-power/state
echo disabled > /sys/devices/platform/output-usb-power/state
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Shiji Yang
Robert Marko
parent
a48ba7efcc
commit
b37f3def86
@ -117,6 +117,9 @@ ipq40xx_setup_interfaces()
|
||||
qxwlan,e2600ac-c2)
|
||||
ucidef_set_interfaces_lan_wan "sw-eth1 sw-eth2" "sw-eth3"
|
||||
;;
|
||||
skspruce,wia3300-20)
|
||||
ucidef_set_interfaces_lan_wan "ETH2" "ETH1"
|
||||
;;
|
||||
zte,mf286d)
|
||||
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
|
||||
@ -0,0 +1,446 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq4019.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
compatible = "skspruce,wia3300-20", "qcom,ipq4019";
|
||||
model = "SKSpruce WIA3300-20";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac;
|
||||
led-boot = &led_status_red;
|
||||
led-failsafe = &led_status_lime;
|
||||
led-running = &led_status_lime;
|
||||
led-upgrade = &led_status_red;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&key_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_status_red: led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_lime: led-1 {
|
||||
color = <LED_COLOR_ID_LIME>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_LIME>;
|
||||
function = LED_FUNCTION_WLAN_2GHZ;
|
||||
gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_LIME>;
|
||||
function = LED_FUNCTION_WLAN_5GHZ;
|
||||
gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
};
|
||||
|
||||
output-usb-power {
|
||||
compatible = "regulator-output";
|
||||
vout-supply = <®_usb>;
|
||||
};
|
||||
|
||||
reg_usb: regulator-usb {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
pinctrl-0 = <®_usb_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
enable-active-high;
|
||||
gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "reg_usb";
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
soc {
|
||||
tcsr@1949000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1949000 0x100>;
|
||||
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
||||
};
|
||||
|
||||
tcsr@194b000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x194b000 0x100>;
|
||||
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
||||
};
|
||||
|
||||
ess_tcsr@1953000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1953000 0x1000>;
|
||||
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
||||
};
|
||||
|
||||
tcsr@1957000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1957000 0x100>;
|
||||
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_spi1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <24000000>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "0:SBL1";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "0:MIBIB";
|
||||
reg = <0x00040000 0x00020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
label = "0:QSEE";
|
||||
reg = <0x00060000 0x00060000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "0:CDT";
|
||||
reg = <0x000c0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@d0000 {
|
||||
label = "0:DDRPARAMS";
|
||||
reg = <0x000d0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@e0000 {
|
||||
compatible = "u-boot,env";
|
||||
label = "0:APPSBLENV";
|
||||
reg = <0x000e0000 0x00010000>;
|
||||
};
|
||||
|
||||
partition@f0000 {
|
||||
label = "0:APPSBL";
|
||||
reg = <0x000f0000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@170000 {
|
||||
label = "0:oldART";
|
||||
reg = <0x00170000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "0:HLOS";
|
||||
reg = <0x00180000 0x00800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@980000 {
|
||||
compatible = "denx,fit";
|
||||
label = "firmware";
|
||||
reg = <0x980000 0x35d0000>;
|
||||
};
|
||||
|
||||
partition@3f50000 {
|
||||
label = "0:APPSBL1";
|
||||
reg = <0x03f50000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3fd0000 {
|
||||
label = "BoardInfo";
|
||||
reg = <0x03fd0000 0x00010000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_boardinfo_108a: macaddr@108a {
|
||||
compatible = "mac-base";
|
||||
reg = <0x108a 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@3fe0000 {
|
||||
label = "RebootCause";
|
||||
reg = <0x03fe0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3ff0000 {
|
||||
label = "0:ART";
|
||||
reg = <0x03ff0000 0x00010000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
precal_art_1000: precal@1000 {
|
||||
reg = <0x1000 0x2f20>;
|
||||
};
|
||||
|
||||
precal_art_5000: precal@5000 {
|
||||
reg = <0x5000 0x2f20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&serial0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðphy3 {
|
||||
leds {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_LIME>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðphy4 {
|
||||
leds {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_LIME>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_boardinfo_108a 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset-delay-us = <2000>;
|
||||
reset-post-delay-us = <2000>;
|
||||
reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&prng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&swport4 {
|
||||
status = "okay";
|
||||
|
||||
label = "ETH2";
|
||||
nvmem-cells = <&macaddr_boardinfo_108a 1>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&swport5 {
|
||||
status = "okay";
|
||||
|
||||
label = "ETH1";
|
||||
nvmem-cells = <&macaddr_boardinfo_108a 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
key_pins: key_pinmux {
|
||||
gpio {
|
||||
pins = "gpio18";
|
||||
function = "gpio";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pinmux {
|
||||
gpio {
|
||||
pins = "gpio8", "gpio9", "gpio11", "gpio28";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
drive-open-drain;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
mdio_pins: mdio_pinmux {
|
||||
gpio {
|
||||
pins = "gpio43";
|
||||
function = "gpio";
|
||||
drive-strength = <4>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
|
||||
mdc {
|
||||
pins = "gpio7";
|
||||
function = "mdc";
|
||||
drive-strength = <4>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mdio {
|
||||
pins = "gpio6";
|
||||
function = "mdio";
|
||||
drive-strength = <4>;
|
||||
drive-open-drain;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
reg_usb_pins: reg_usb_pinmux {
|
||||
gpio {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
serial0_pins: serial0_pinmux {
|
||||
blsp_uart0 {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "blsp_uart0";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi0_pins: spi0_pinmux {
|
||||
blsp_spi0 {
|
||||
pins = "gpio13", "gpio14", "gpio15";
|
||||
function = "blsp_spi0";
|
||||
drive-strength = <4>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
gpio {
|
||||
pins = "gpio12";
|
||||
function = "gpio";
|
||||
drive-strength = <4>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_hs_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cell-names = "mac-address", "pre-calibration";
|
||||
nvmem-cells = <&macaddr_boardinfo_108a 3>, <&precal_art_1000>;
|
||||
qcom,ath10k-calibration-variant = "SKSpruce_WIA3300-20";
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cell-names = "mac-address", "pre-calibration";
|
||||
nvmem-cells = <&macaddr_boardinfo_108a 4>, <&precal_art_5000>;
|
||||
qcom,ath10k-calibration-variant = "SKSpruce_WIA3300-20";
|
||||
};
|
||||
@ -1092,6 +1092,19 @@ define Device/qxwlan_e2600ac-c2
|
||||
endef
|
||||
TARGET_DEVICES += qxwlan_e2600ac-c2
|
||||
|
||||
define Device/skspruce_wia3300-20
|
||||
$(call Device/FitImage)
|
||||
BLOCKSIZE := 64k
|
||||
IMAGE_SIZE := 55104k
|
||||
SOC := qcom-ipq4019
|
||||
DEVICE_VENDOR := SKSpruce
|
||||
DEVICE_MODEL := WIA3300-20
|
||||
DEVICE_PACKAGES := -ath10k-board-qca4019 ipq-wifi-skspruce_wia3300-20
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES +=skspruce_wia3300-20
|
||||
|
||||
define Device/sony_ncp-hg100-cellular
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := Sony
|
||||
|
||||
Loading…
Reference in New Issue
Block a user