mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-18 21:28:02 +00:00
ramips: mt7621: Add DNA Valokuitu Plus EX400
Specifications:
- Device: DNA Valokuitu Plus EX400
- SoC: MT7621A
- Flash: 256MB NAND
- RAM: 256MB
- Ethernet: Built-in, 2 x 1GbE
- Wifi: MT7603 2.4 GHz, MT7615 5 GHz (4x internal antennas)
- USB: 1x 3.0
- LED: 1x green/red, 1x green
- Buttons: Reset
MAC addresses:
- LAN: u-boot 'ethaddr' (label)
- WAN: label + 1
- 2.4 GHz: label + 6
- 5 GHz: label + 7
Serial:
There is a black block connector next to the red ethernet connector. It
is accessible also through holes in the casing.
Pinout (TTL 3.3V)
+---+---+
|Tx |Rx |
+---+---+
|Vcc|Gnd|
+---+---+
Firmware:
The vendor firmware is a fork of OpenWrt (Reboot) with a kernel version
4.4.93. The flash is arranged as below and there is a dual boot
mechanism alternating between rootfs_0 and rootfs_1.
+-------+------+------+-----------+-----------+
| | env1 | env2 | rootfs_0 | rootfs_1 |
| +------+------+-----------+-----------+
| | UBI volumes |
+-------+-------------------------------------+
|U-Boot | UBI |
+-------+-------------------------------------+
|mtd0 | mtd1 |
+-------+-------------------------------------+
| NAND |
+---------------------------------------------+
In OpenWrt rootfs_0 will be used as a boot partition that will contain the
kernel and the dtb. The squashfs rootfs and overlay are standard OpenWrt
behaviour.
+-------+------+------+-----------+--------+------------+
| | env1 | env2 | rootfs_0 | rootfs | rootfs_data|
| +------+------+-----------+--------+------------+
| | UBI volumes |
+-------+-----------------------------------------------+
|U-Boot | UBI |
+-------+-----------------------------------------------+
|mtd0 | mtd1 |
+-------+-----------------------------------------------+
| NAND |
+-------------------------------------------------------+
U-boot:
With proper serial access booting can be halted to U-boot by pressing any
key. TFTP and flash writes are available, but only the first one has been
tested.
NOTE: Recovery mode can be accessed by holding down the reset button while
powering on the device. The led 'Update' will show a solid green light
once ready. A web server will be running at 192.168.1.1:80 and it will
allow flashing a firmware package. You can cycle between rootfs_0 and
rootfs_1 by pressing the reset button once.
Root password:
With the vendor web UI create a backup of your settings and download the
archive to your computer. Within the archive in the file
/etc/shadow replace the password hash for root with that of a password you
know. Restore the configuration with the vendor web UI and you will have
changed the root password.
SSH access:
You might need to enable the SSH service for LAN interface as by default
it's enabled for WAN only.
Installing OpenWrt:
With the vendor web UI install the OpenWrt factory image. Alternatively,
ssh to the device and use sysupgrade -n from cli.
Finalize by installing the OpenWrt sysupgrade image to get a fully
functioning system.
Reverting to the vendor firmware:
Boot with OpenWrt initramfs image
- Remove volumes rootfs_0, rootfs and rootfs_data and create vendor
volumes.
ubirmvol /dev/ubi0 -n 2
ubirmvol /dev/ubi0 -n 3
ubirmvol /dev/ubi0 -n 4
ubimkvol /dev/ubi0 -N rootfs_0 -S 990
ubimkvol /dev/ubi0 -N rootfs_1 -S 990
Power off and enter to the U-boot recovery to install the vendor
firmware.
Known issues:
- MACs for wifi are stored in currently unknown place but it seems
to persist over power-off. They might be stored on the chip.
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
[rmilecki: try NVMEM for MACs]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This commit is contained in:
Mauri Sandberg
Rafał Miłecki
parent
232cc239b8
commit
fea2264d9f
@ -146,6 +146,10 @@ xiaomi,mi-router-cr6608|\
|
||||
xiaomi,mi-router-cr6609)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
|
||||
;;
|
||||
dna,valokuitu-plus-ex400)
|
||||
ubootenv_add_uci_config "/dev/ubi0_0" "0x0" "0x1f000" "0x1f000" "1"
|
||||
ubootenv_add_uci_config "/dev/ubi0_1" "0x0" "0x1f000" "0x1f000" "1"
|
||||
;;
|
||||
netgear,wax214v2)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
||||
ubootenv_add_uci_sys_config "/dev/mtd1" "0x20000" "0x8000" "0x20000"
|
||||
|
||||
130
target/linux/ramips/dts/mt7621_dna_valokuitu-plus-ex400.dts
Normal file
130
target/linux/ramips/dts/mt7621_dna_valokuitu-plus-ex400.dts
Normal file
@ -0,0 +1,130 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "dna,valokuitu-plus-ex400", "mediatek,mt7621-soc";
|
||||
model = "DNA Valokuitu Plus EX400";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
label-mac-device = &gmac0;
|
||||
led-boot = &led_status_red;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_update_green;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-override = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_green: led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_red: led-1 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_update_green: led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_PROGRAMMING;
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x00 0x100000>;
|
||||
label = "uboot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
reg = <0x100000 0xff00000>;
|
||||
label = "ubi";
|
||||
|
||||
volumes {
|
||||
ubi-volume-env1 {
|
||||
volname = "env1";
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "u-boot,env";
|
||||
|
||||
ethaddr: ethaddr {
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
label = "wan";
|
||||
phy-handle = <ðphy0>;
|
||||
nvmem-cells = <ðaddr 1>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðphy0 {
|
||||
/delete-property/ interrupts;
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "uart2", "uart3";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@1 {
|
||||
label = "lan";
|
||||
nvmem-cells = <ðaddr 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -36,6 +36,68 @@ define Build/arcadyan-trx
|
||||
rm $@.hsqs $@.tail
|
||||
endef
|
||||
|
||||
define Build/dna-header
|
||||
BC='$(STAGING_DIR_HOST)/bin/bc' ;\
|
||||
ubifsofs="1024" ;\
|
||||
ubifs="$$(stat -c%s $@)" ;\
|
||||
pkginfoofs="$$(echo $${ubifsofs} + $${ubifs} | $${BC})" ;\
|
||||
pkginfo="0" ;\
|
||||
scrofs="$$(echo $${pkginfoofs} + $${pkginfo} | $${BC})" ;\
|
||||
scr="0" ;\
|
||||
sigofs="$$(echo $${scrofs} + $${scr} | $${BC})" ;\
|
||||
sig="0" ;\
|
||||
md5ofs="$$(echo $${sigofs} + $${sig} | $${BC})" ;\
|
||||
md5="32" ;\
|
||||
size="$$(echo $${md5ofs} + $${md5} | $${BC})" ;\
|
||||
echo "IntenoIopY" > $@.tmp ;\
|
||||
echo "version 5" >> $@.tmp ;\
|
||||
echo "integrity MD5SUM" >> $@.tmp ;\
|
||||
echo "board EX400" >> $@.tmp ;\
|
||||
echo "chip 7621" >> $@.tmp ;\
|
||||
echo "arch all mipsel_1004kc" >> $@.tmp ;\
|
||||
echo "model EX400" >> $@.tmp ;\
|
||||
echo "release EX400-X-DNA-4.3.6.100-R-210518_0935" >> $@.tmp ;\
|
||||
echo "customer DNA" >> $@.tmp ;\
|
||||
echo "ubifsofs $${ubifsofs}" >> $@.tmp ;\
|
||||
echo "ubifs $${ubifs}" >> $@.tmp ;\
|
||||
echo "pkginfoofs $${pkginfoofs}" >> $@.tmp ;\
|
||||
echo "pkginfo $${pkginfo}" >> $@.tmp ;\
|
||||
echo "scrofs $${scrofs}" >> $@.tmp ;\
|
||||
echo "scr $${scr}" >> $@.tmp ;\
|
||||
echo "sigofs $${sigofs}" >> $@.tmp ;\
|
||||
echo "sig $${sig}" >> $@.tmp ;\
|
||||
echo "md5ofs $${md5ofs}" >> $@.tmp ;\
|
||||
echo "md5 $${md5}" >> $@.tmp ;\
|
||||
echo "size $${size}" >> $@.tmp
|
||||
|
||||
dd if=$@.tmp of=$@.tmp2 bs=1024 count=1 conv=sync
|
||||
cat $@.tmp2 $@ > $@.tmp
|
||||
rm $@.tmp2
|
||||
mv $@.tmp $@
|
||||
endef
|
||||
|
||||
define Build/dna-bootfs
|
||||
mkdir -p $@.ubifs-dir/boot
|
||||
|
||||
# populate the boot fs with the dtb and with either initramfs kernel or
|
||||
# the normal kernel
|
||||
$(CP) $(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@.ubifs-dir/boot/dtb
|
||||
|
||||
$(if $(findstring with-initrd,$(word 1,$(1))),\
|
||||
( \
|
||||
$(CP) $@ $@.ubifs-dir/boot/uImage \
|
||||
) , \
|
||||
( \
|
||||
$(CP) $(IMAGE_KERNEL) $@.ubifs-dir/boot/uImage \
|
||||
) \
|
||||
)
|
||||
|
||||
# create ubifs
|
||||
$(STAGING_DIR_HOST)/bin/mkfs.ubifs ${MKUBIFS_OPTS} -r $@.ubifs-dir/ -o $@.new
|
||||
rm -rf $@.ubifs-dir
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/gemtek-trailer
|
||||
printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@
|
||||
endef
|
||||
@ -103,6 +165,10 @@ define Build/iodata-mstc-header2
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/kernel-initramfs-bin
|
||||
$(CP) $(KDIR)/vmlinux-initramfs $@
|
||||
endef
|
||||
|
||||
define Build/znet-header
|
||||
$(eval version=$(word 1,$(1)))
|
||||
$(eval magic=$(if $(word 2,$(1)),$(word 2,$(1)),ZNET))
|
||||
@ -988,6 +1054,27 @@ define Device/d-team_pbr-m1
|
||||
endef
|
||||
TARGET_DEVICES += d-team_pbr-m1
|
||||
|
||||
define Device/dna_valokuitu-plus-ex400
|
||||
$(Device/dsa-migration)
|
||||
IMAGE_SIZE := 117m
|
||||
PAGESIZE := 2048
|
||||
MKUBIFS_OPTS := --min-io-size=$$(PAGESIZE) --leb-size=124KiB --max-leb-cnt=96 \
|
||||
--log-lebs=2 --space-fixup --squash-uids
|
||||
DEVICE_VENDOR := DNA
|
||||
DEVICE_MODEL := Valokuitu Plus EX400
|
||||
KERNEL := kernel-bin | lzma | uImage lzma
|
||||
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
||||
IMAGES := factory.bin sysupgrade.tar
|
||||
IMAGE/factory.bin := kernel-initramfs-bin | lzma | uImage lzma | \
|
||||
dna-bootfs with-initrd | dna-header | \
|
||||
append-md5sum-ascii-salted
|
||||
IMAGE/sysupgrade.tar := dna-bootfs | sysupgrade-tar kernel=$$$$@ | check-size | \
|
||||
append-metadata
|
||||
DEVICE_IMG_NAME = $$(DEVICE_IMG_PREFIX)-$$(2)
|
||||
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
|
||||
endef
|
||||
TARGET_DEVICES += dna_valokuitu-plus-ex400
|
||||
|
||||
define Device/edimax_ra21s
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
|
||||
@ -67,6 +67,7 @@ ramips_setup_interfaces()
|
||||
ucidef_set_interface_lan "lan"
|
||||
;;
|
||||
asiarf,ap7621-001|\
|
||||
dna,valokuitu-plus-ex400|\
|
||||
humax,e10|\
|
||||
keenetic,kn-3510|\
|
||||
openfi,5pro|\
|
||||
|
||||
@ -32,6 +32,10 @@ boot() {
|
||||
samknows,whitebox-v8)
|
||||
fw_setenv bootcount 0
|
||||
;;
|
||||
dna,valokuitu-plus-ex400)
|
||||
fw_setenv boot_cnt_primary 0
|
||||
fw_setenv boot_cnt_alt 0
|
||||
;;
|
||||
zyxel,lte3301-plus)
|
||||
[ $(printf %d $(fw_printenv -n DebugFlag)) -gt 0 ] || fw_setenv DebugFlag 1
|
||||
[ $(printf %d $(fw_printenv -n Image1Stable)) -gt 0 ] || fw_setenv Image1Stable 1
|
||||
|
||||
44
target/linux/ramips/mt7621/base-files/lib/upgrade/dna.sh
Normal file
44
target/linux/ramips/mt7621/base-files/lib/upgrade/dna.sh
Normal file
@ -0,0 +1,44 @@
|
||||
#
|
||||
# Copyright (C) 2023 Mauri Sandberg
|
||||
#
|
||||
|
||||
# The vendor UBI is split in volumes 0-3. Volumes 0 and 1 contain U-Boot
|
||||
# environments env1 and env2, respectively. The vendor root file systems
|
||||
# are in volumes 2 (rootfs_0) and 3 (rootfs_1). Drop the two roots and
|
||||
# explicitly use rootfs_0 as a boot partition that contains the dtb and the
|
||||
# OpenWrt kernel. This is because the vendor U-Boot expects to find them there.
|
||||
# Then continue upgrade with the default method - a SquashFS rootfs will be
|
||||
# installed and the rest of UBI will be used as an overlay.
|
||||
|
||||
# The 'kernel' inside the sysupgrage.tar is an UBIFS image that contains
|
||||
# /boot/dtb and /boot/kernel. The 'root' is an OpenWrt SquashFS root
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/upgrade/nand.sh
|
||||
|
||||
dna_do_upgrade () {
|
||||
tar -xaf $1
|
||||
|
||||
# get the size of the new bootfs
|
||||
local _bootfs_size=$(wc -c < ./sysupgrade-dna_valokuitu-plus-ex400/kernel)
|
||||
[ -n "$_bootfs_size" -a "$_bootfs_size" -gt "0" ] || nand_do_upgrade_failed
|
||||
|
||||
# remove existing rootfses and recreate rootfs_0
|
||||
ubirmvol /dev/ubi0 --name=rootfs_0 > /dev/null 2>&1
|
||||
ubirmvol /dev/ubi0 --name=rootfs_1 > /dev/null 2>&1
|
||||
ubirmvol /dev/ubi0 --name=rootfs > /dev/null 2>&1
|
||||
ubirmvol /dev/ubi0 --name=rootfs_data > /dev/null 2>&1
|
||||
ubimkvol /dev/ubi0 --type=static --size=${_bootfs_size} --name=rootfs_0
|
||||
|
||||
# update the rootfs_0 contents
|
||||
local _kern_ubivol=$( nand_find_volume "ubi0" "rootfs_0" )
|
||||
ubiupdatevol /dev/${_kern_ubivol} sysupgrade-dna_valokuitu-plus-ex400/kernel
|
||||
|
||||
fw_setenv root_vol rootfs_0
|
||||
fw_setenv boot_cnt_primary 0
|
||||
fw_setenv boot_cnt_alt 0
|
||||
|
||||
# proceed to upgrade the default way
|
||||
CI_KERNPART=none
|
||||
nand_do_upgrade "$1"
|
||||
}
|
||||
@ -150,6 +150,9 @@ platform_do_upgrade() {
|
||||
buffalo,wsr-2533dhpls)
|
||||
buffalo_do_upgrade "$1"
|
||||
;;
|
||||
dna,valokuitu-plus-ex400)
|
||||
dna_do_upgrade "$1"
|
||||
;;
|
||||
elecom,wrc-x1800gs)
|
||||
[ "$(fw_printenv -n bootmenu_delay)" != "0" ] || \
|
||||
fw_setenv bootmenu_delay 3
|
||||
|
||||
Loading…
Reference in New Issue
Block a user