openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 17:01:14 +00:00

Author	SHA1	Message	Date
Hauke Mehrtens	2fcaba306e	brcm47xx: change board detection for some Asus devices This closes #13316 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37680	2013-08-04 12:36:13 +00:00
Hauke Mehrtens	290dade033	brcm47xx: switch to kernel 3.10.4 This uses a new switch driver. The old ADMTEK Adm6996 switch is not supported any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37650	2013-08-01 21:01:59 +00:00
Hauke Mehrtens	7e14fd55fd	brcm47xx: use lib phy when tg3 is in use This is untested, but probably needed to make it work with the phy lib switch driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37649	2013-08-01 20:47:55 +00:00
Hauke Mehrtens	2b55968f5d	brcm47xx: improve detection of Linksys WRTSL54GS This closes #13319 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37647	2013-08-01 19:33:59 +00:00
Hauke Mehrtens	6d7f796b52	brcm47xx: remove support for kernel 3.9 This is not needed any more. SVN-Revision: 37646	2013-08-01 19:17:51 +00:00
Hauke Mehrtens	2363cb3893	brcm47xx: add function to get a gpio pin by name bcm47xx_nvram_gpio_pin() returns a gpio pin number for a given name based on configuration data in nvram. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37644	2013-08-01 19:04:12 +00:00
Hauke Mehrtens	e2b2e3886b	brcm47xx: run mtd fixtrx linux every time With this patch it is possible to boot a device with kernel 3.10 a second time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37625	2013-07-31 17:41:52 +00:00
Gabor Juhos	ef944dcb85	kernel: update 3.10 to 3.10.2 Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37502	2013-07-22 15:31:13 +00:00
Jonas Gorski	b1b4e7db13	kernel: move CONFIG_NET_IP_TUNNEL to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37465	2013-07-19 22:58:01 +00:00
Hauke Mehrtens	c7f8cb3f4f	kernel: update bcma and ssb to version from wireless-testing/master tag master-2013-07-18 This should fix some build problems in b43 with kernel 3.3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37432	2013-07-19 12:02:34 +00:00
Hauke Mehrtens	866e229299	brcm47xx: fix name of patch SVN-Revision: 37340	2013-07-15 11:42:54 +00:00
Hauke Mehrtens	f8d55e7541	brcm47xx: use b53 phy driver for the switch in kernel 3.10 This makes it possible to use swconfig to controll the switch. This was tested with devices using b43 and bgmac. This was not tested on devices using tg3. This does not support the adm switch used in some very old devices. SVN-Revision: 37304	2013-07-14 14:11:17 +00:00
Hauke Mehrtens	a5c0ad6354	brcm47xx: add initial support for kernel 3.10 SVN-Revision: 37287	2013-07-14 13:44:45 +00:00
Hauke Mehrtens	3bc90a4d23	brcm47xx: fix switch handling This fixes some problems with the switch handling * It now send the messages again to indicate a button for failsafe mode should be pressed * it does not leak packages between wan and lan any more * the switch works again in normal mode The Ethernet connection has to be up when the switch driver switch-robo is insmoded therefor we just do it again. Explicitly set enable_vlan to prevent leaking packages. This should close #13869, #13868 and #13716 SVN-Revision: 37286	2013-07-14 13:19:58 +00:00
Hauke Mehrtens	ef0b9be95e	brcm47xx: do not load the kernel modules needed for Ethernet manually add the boot flag to make the kernel modules needed for Ethernet and diag load on startup. SVN-Revision: 37284	2013-07-14 12:59:00 +00:00
Hauke Mehrtens	e800436de3	brcm47xx: do not change nvram without user interaction SVN-Revision: 37281	2013-07-14 12:56:42 +00:00
Hauke Mehrtens	e041d370a7	brcm47xx: proc gets mounted without this patch SVN-Revision: 37272	2013-07-13 21:42:19 +00:00
Hauke Mehrtens	8dabd7a26b	brcm47xx: remove obsolete hotplug stuff SVN-Revision: 37271	2013-07-13 20:38:33 +00:00
John Crispin	541bede918	brcm47xx: fix module insert order https://dev.openwrt.org/ticket/13811 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37161	2013-07-04 13:31:13 +00:00
Florian Fainelli	6a4f2922f6	targets: prepare for supporting normal and initramfs images In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049	2013-06-27 19:58:31 +00:00
John Crispin	39df8d1a45	brcm47xx: dont manually insmod switch drivers Signed-off-by: John Crispin <bloic@openwrt.org> SVN-Revision: 36993	2013-06-21 16:53:15 +00:00
Hauke Mehrtens	9492d445de	brcm47xx: run make kernel_oldconfig for 3.9 kernel config SVN-Revision: 36928	2013-06-12 14:51:50 +00:00
Hauke Mehrtens	87f994d16d	brcm47xx: remove support for kernel 3.6 SVN-Revision: 36927	2013-06-12 14:48:45 +00:00
Hauke Mehrtens	990423f3ef	brcm47xx: add initial support for kernel 3.9 SVN-Revision: 36926	2013-06-12 14:47:53 +00:00
Gabor Juhos	46225b99d9	kernel: update linux 3.8 to 3.8.13 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36724	2013-05-26 16:02:31 +00:00
Jonas Gorski	526aedb705	kernel: move CONFIG_MIPS_SEAD3 to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36617	2013-05-12 21:41:55 +00:00
Gabor Juhos	e57c7d6c12	kernel: update linux 3.8 to 3.8.12 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36576	2013-05-08 08:53:53 +00:00
Gabor Juhos	8a9fe26f20	kernel: update linux 3.8 to 3.8.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507	2013-05-01 22:15:18 +00:00
Hauke Mehrtens	ca7f9638d5	broadcom-diag: support for the WNDR3700v3 I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 36482	2013-04-28 21:11:17 +00:00
Hauke Mehrtens	7dee0dae35	brcm47xx: use kernel 3.8.10 as default kernel The biggest change with this kernel is a new partition parser. SVN-Revision: 36480	2013-04-28 18:25:16 +00:00
Hauke Mehrtens	00a7ace7cf	brcm47xx: add board detection for NETGEAR WNDR4500 V2 SVN-Revision: 36478	2013-04-28 18:19:31 +00:00
Hauke Mehrtens	1bac172c44	kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26. SVN-Revision: 36473	2013-04-28 16:52:11 +00:00
Gabor Juhos	36d4fd70bc	kernel: update linux 3.8 to 3.8.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453	2013-04-26 16:55:42 +00:00
Felix Fietkau	f58dcb59c6	kernel: backport SSB/BCMA changes in preparation for a compat-wireless update Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36367	2013-04-19 12:39:40 +00:00
Hauke Mehrtens	4a46687d25	brcm47xx: use old partition names again for kernel 3.8 This fixes sysupgrade. The partition names are used all over the Internet in various howtos. Thank you russell for spotting this problem. SVN-Revision: 36235	2013-04-06 22:22:26 +00:00
Hauke Mehrtens	204bde8d98	brcm47xx: fix error in board detection when nvram is not available. SVN-Revision: 36234	2013-04-06 19:02:25 +00:00
Gabor Juhos	f78c902cfd	kernel: update linux 3.8 to 3.8.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36215	2013-04-06 11:40:44 +00:00
Hauke Mehrtens	98ef9e5411	brcm47xx: generate images for Linksys E.... models Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 36139	2013-03-27 15:51:28 +00:00
Hauke Mehrtens	31c9452120	brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported. SVN-Revision: 36137	2013-03-27 15:35:52 +00:00
Hauke Mehrtens	a9e5a178ef	brcm47xx: generate images for more WRT...N models Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 36136	2013-03-27 15:34:55 +00:00
Hauke Mehrtens	d5cf67297a	brcm47xx: generate images for some more devices These devices should be supported by trunk now. SVN-Revision: 36099	2013-03-20 22:01:18 +00:00
Gabor Juhos	07532dca7f	kernel: update linux 3.8 to 3.8.3 Also refresh the related generic/platform patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36039	2013-03-15 14:39:51 +00:00
Hauke Mehrtens	e1f24d99e1	brcm47xx: refresh config SVN-Revision: 35948	2013-03-10 20:42:26 +00:00
Hauke Mehrtens	44ed7d664a	brcm47xx: add some more partition parser fixes by Rafał Miłecki SVN-Revision: 35912	2013-03-09 19:48:03 +00:00
Hauke Mehrtens	694050a4cf	brcm47xx: netconfig: add bacis support for swconfig Parse the cpu port from swconfig and explicitly mark the cpu port as tagged. SVN-Revision: 35911	2013-03-09 19:24:43 +00:00
Hauke Mehrtens	04af8bd108	brcm47xx: bgmac: omit the fcs This fixes #13058 and hopefully #12927 SVN-Revision: 35834	2013-02-28 13:27:21 +00:00
Hauke Mehrtens	9805096f48	brcm47xx: bgmac: update to version form netdev git repository SVN-Revision: 35833	2013-02-28 13:24:39 +00:00
Hauke Mehrtens	2c34e1aba5	brcm47xx: use bcm47xx_board_get() and detect some more boards in flash partition driver SVN-Revision: 35791	2013-02-25 20:56:37 +00:00
Hauke Mehrtens	5d3b728372	brcm47xx: board detection WNDR3400v2 WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#". CFE and NVRAM contain different vars - example: CFE line original: Device eth0: hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0 CFE after openwrt: Device eth0: hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0 Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2 (and on wikidevi for example) Signed off by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 35790	2013-02-25 20:55:46 +00:00
Hauke Mehrtens	0f2fc0adfd	brcm47xx: use same board detection code as kernel 3.8 SVN-Revision: 35770	2013-02-24 18:10:42 +00:00
Hauke Mehrtens	9afdb046d3	brcm47xx: do not use vlan0 any more. The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325. This makes OpenWrt always use vlan1 and vlan2 instead. SVN-Revision: 35704	2013-02-20 15:31:43 +00:00
Hauke Mehrtens	1a8218d6e4	brcm47xx: add initial support for kernel 3.8 This contains the following new bigger changes: * new partition parser which still could lake some features or have bugs * new nand flash driver * using physmap-flash flash driver for parallel flash * some changes to the serial flash driver With these changes OpenWrt starts using more of the mainline flash drivers. SVN-Revision: 35632	2013-02-16 20:28:24 +00:00
Hauke Mehrtens	ce6a7543fe	brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch modules Adjust the "AutoLoad" number for the BGMAC module to be prior to the switch modules. This probably isn't real important as the modules are loaded in the correct order by preinit anyway. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35625	2013-02-16 16:27:33 +00:00
Hauke Mehrtens	9de704a03b	brcm47xx: improve cpuport detection for filesafe Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X Ask the switch driver where the CPU port is. SVN-Revision: 35624	2013-02-16 16:24:15 +00:00
Hauke Mehrtens	92d16f38d7	brcm47xx: fix network config on simpleshare The included patch will generate a correct network configuration on the simpletech simpleshare. Thank you for the patch Will Holmes (RealOpty) This closes #12361. SVN-Revision: 35623	2013-02-16 15:24:48 +00:00
Hauke Mehrtens	a21ba013f5	brcm47xx: handle return values of cfe_env_get() correctly. This closes #12746. SVN-Revision: 35622	2013-02-16 15:19:24 +00:00
Hauke Mehrtens	283bff02a2	brcm47xx: bgmac: fix unaligned accesses to network headers. SVN-Revision: 35621	2013-02-16 14:38:17 +00:00
Hauke Mehrtens	5fed2916c3	brcm47xx: fix unaligned access to mac address The mac address should be aligned to u16 to prevent an unaligned access in drivers/ssb/pci.c where it is casted to __be16. This closes #9824. SVN-Revision: 35618	2013-02-16 13:46:00 +00:00
Hauke Mehrtens	d9580d224a	brcm47xx: try to automatically detect if the wan port is at port 4 and not at port 0. This should fix #13000. SVN-Revision: 35617	2013-02-16 12:37:24 +00:00
Hauke Mehrtens	c0f6c75cf7	brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 8" and vlan0ports: "0 8" SVN-Revision: 35597	2013-02-14 12:38:16 +00:00
Hauke Mehrtens	54ca3eed5d	brcm47xx: configure vlan correctly on some recent devices. SVN-Revision: 35587	2013-02-13 16:05:52 +00:00
Hauke Mehrtens	4663d424a3	brcm47xx: add some more fixes to bgmac Thank you Rafał Miłecki and Nathan Hintz SVN-Revision: 35574	2013-02-12 20:10:38 +00:00
Hauke Mehrtens	7c0208b336	brcm47xx: update tg3 to the version send upstream SVN-Revision: 35573	2013-02-12 20:09:15 +00:00
Hauke Mehrtens	07db9e8eab	brcm47xx: fix name of kmod-ocf-ubsec-ssb This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb. Thank you Manuel Munz <freifunk@somakoma.de> for the patch. SVN-Revision: 35509	2013-02-06 22:51:25 +00:00
Hauke Mehrtens	a52832164b	brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up This fixes #12927. SVN-Revision: 35507	2013-02-06 14:57:00 +00:00
Hauke Mehrtens	8ba8225686	brcm47xx: fix detection of Asus RT-N16 This fixes #12936. SVN-Revision: 35492	2013-02-04 22:49:05 +00:00
Hauke Mehrtens	a1e3c0ca46	Add Failsafe support for Linksys E3000V1 / WRT610NV2 Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to be expanded. Is there a way to determine the correct cpu_port to use in a generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could a similar method be used in "/etc/init.d/netconfig"? Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35491	2013-02-04 22:40:57 +00:00
Hauke Mehrtens	c2198aba32	brcm47xx: Fix switch config on 4716/53115 devices Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 35490	2013-02-04 22:38:37 +00:00
Hauke Mehrtens	68aeb7af8e	brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe. SVN-Revision: 35341	2013-01-27 21:48:28 +00:00
Hauke Mehrtens	e083c7926b	brcm47xx: create image for Netgear WNDR3400 V1 SVN-Revision: 35323	2013-01-26 20:34:38 +00:00
Hauke Mehrtens	05623aebef	brcm47xx: add initial board detection code SVN-Revision: 35322	2013-01-26 20:34:00 +00:00
Hauke Mehrtens	a83d7bb109	brcm47xx: add gpio to irq function again SVN-Revision: 35321	2013-01-26 20:33:23 +00:00
Hauke Mehrtens	76c12ff797	brcm47xx: change generic profiles The default profile now contains Ethernet drivers for all the types found on supported boards. There are other profiles for each Ethernet driver. SVN-Revision: 35314	2013-01-24 14:38:10 +00:00
Hauke Mehrtens	2bf03f971d	brcm47xx: BCMA - Update default IRQ assignment per upstream change Update the default IRQ assignment for unrecognized devices per the upstream change. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35121	2013-01-12 15:00:01 +00:00
Hauke Mehrtens	548cb59826	brcm47xx: update bgmac driver to the version in mainline kernel SVN-Revision: 35083	2013-01-10 14:22:19 +00:00
Hauke Mehrtens	885eea1842	kernel: update bcma and ssb to master-2013-01-09 from wireless-testing SVN-Revision: 35080	2013-01-10 14:05:18 +00:00
Hauke Mehrtens	7b0af8193b	brcm47xx: BGMAC Driver corrections 1) Fix what appears to be a logic error in bgmac_phy_advertise. 2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo interface w/ the driver to work correctly. I still have the issue with the interface always being HD when the speed/duplex is set manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35052	2013-01-07 22:51:39 +00:00
Hauke Mehrtens	a105eea1a1	brcm47xx: various fixes and code cleanups for irq code This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34997	2013-01-03 16:56:54 +00:00
Hauke Mehrtens	4443997fd8	brcm47xx: add bgmac driver This Ethernet driver is in early development stage and still has some problems. This was working on my bcm4716 based device. Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver. SVN-Revision: 34995	2013-01-03 02:05:22 +00:00
Hauke Mehrtens	8f6bdcffa1	brcm47xx: build b44 as a module SVN-Revision: 34994	2013-01-03 02:00:25 +00:00
Hauke Mehrtens	22d62d311a	brcm47xx: run ifup before starting the switch In addition check_module is not needed, nobody checks the return value. SVN-Revision: 34993	2013-01-03 01:59:43 +00:00
Hauke Mehrtens	97b2b601c7	brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and BCM4748 (per the Broadcom SDK). IRQ Flag values greater than 7 are ignored when setting the interrupt masks. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34990	2013-01-03 01:56:13 +00:00
Hauke Mehrtens	f74e847301	brcm47xx: improve IRQ handling for bcma based devices This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34989	2013-01-03 01:55:34 +00:00
Hauke Mehrtens	25afeba608	brcm47xx: add a new version of the nvram rewrite patch This is the version like it was send for mainline inclusion. SVN-Revision: 34988	2013-01-03 01:53:30 +00:00
Hauke Mehrtens	edc7ab525f	brcm47xx: move patches already in the mainline kernel to the front SVN-Revision: 34987	2013-01-03 01:51:31 +00:00
Hauke Mehrtens	76c767f122	brcm47xx: remove support for kernel version 3.3 SVN-Revision: 34986	2013-01-03 01:48:43 +00:00
Hauke Mehrtens	981b7410f8	brcm47xx: bcma: correct M25P32 serial flash ID Thank you Rafał Miłecki. SVN-Revision: 34900	2012-12-27 19:18:40 +00:00
Mirko Vogt	e34a4e0c7b	Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) SVN-Revision: 34793	2012-12-19 16:07:50 +00:00
Mirko Vogt	439a869090	Do not overload mount-call - trying to reduce confusion The behaviour of calling 'mount' differed depending on whether it called the busybox-mount, the mount of util-linux, the mount defined in /lib/functions.sh and /lib/functions/boot.sh /etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh, both re-defining 'mount'. SVN-Revision: 34792	2012-12-19 16:07:46 +00:00
Gabor Juhos	44b9898251	kernel: update linux 3.6 to 3.6.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34748	2012-12-18 14:41:16 +00:00
Hauke Mehrtens	4901ac8225	brcm47xx: improve suppressing printing if a module was found in preinit function. Thank you Bastian Bittorf SVN-Revision: 34680	2012-12-14 22:45:12 +00:00
Hauke Mehrtens	6c8efbfdc0	brcm47xx: Additional BCM4716 support Additional BCM4716 support. Still needs working ethernet driver. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34672	2012-12-13 18:57:38 +00:00
Hauke Mehrtens	6672d869da	brcm47xx: BCMA - Broadcom 2011 SDK Updates I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't noticed any obvious changes in behavior with them applied; but thought I should at least pass them on. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34670	2012-12-13 18:54:04 +00:00
Hauke Mehrtens	97d22306da	brcm47xx: return the real irq number in bcma_core_irq The irq signal numbers that are send by the cpu are increased by 2 from the number programmed into the mips core by bcma. Return the irq number on which the irqs are send in bcma_core_irq() now. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34669	2012-12-13 18:51:10 +00:00
Hauke Mehrtens	71712ec522	brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way. SVN-Revision: 34655	2012-12-13 00:12:42 +00:00
Hauke Mehrtens	5be97468f6	brcm47xx: use kernel 3.6.10 by default now SVN-Revision: 34654	2012-12-13 00:11:55 +00:00
Hauke Mehrtens	235c065e12	brcm47xx: suppress printing if a module was found in preinit function. SVN-Revision: 34653	2012-12-13 00:11:11 +00:00
Hauke Mehrtens	3a4a6cfd64	kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko SVN-Revision: 34652	2012-12-13 00:09:55 +00:00
Hauke Mehrtens	1bd8db0bd6	kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing SVN-Revision: 34651	2012-12-12 22:42:18 +00:00
Florian Fainelli	512baafc6b	kernel/3.3: move OHCI and EHCI platform drivers to generic These patches are not specific to bcm47xx and will be used on other platforms as well. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34501	2012-12-05 14:18:05 +00:00
Hauke Mehrtens	2ac9ac5163	brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available. SVN-Revision: 34454	2012-12-02 16:11:39 +00:00
Gabor Juhos	c2f018fca2	remove common symbols from 3.6 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34404	2012-11-29 15:21:41 +00:00
Gabor Juhos	1f516235ea	remove common symbols from 3.3 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34403	2012-11-29 15:21:35 +00:00
Gabor Juhos	3a4d0ebd5c	kernel: update linux 3.6 to 3.6.8 Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34402	2012-11-29 07:42:19 +00:00
Hauke Mehrtens	efd00e6240	brcm47xx: fix title of Bcm4705-wl profile SVN-Revision: 34378	2012-11-25 16:41:00 +00:00
Hauke Mehrtens	a3d976aff5	brcm47xx: add profile for bcm4705 with wl driver SVN-Revision: 34336	2012-11-25 16:15:27 +00:00
Hauke Mehrtens	aa8e887a46	brcm47xx: whitespace cleanups SVN-Revision: 34329	2012-11-25 14:03:51 +00:00
Hauke Mehrtens	be77f9951c	brcm47xx: fix cpu clock detection on ASUS WL-520gU The ASUS WL-520gU and some other similar Asus devices have a BCM5354 running at 200MHZ and not at 240 which is the default for this SoC. This fixes #4083. SVN-Revision: 34325	2012-11-24 20:28:06 +00:00
Hauke Mehrtens	264873b3c5	brcm47xx: watchdog: deactivate NOWAYOUT. In the old configuration the SoC issued a reboot if the watchdog was killed also if it was kill with TERM and not KILL. This will fix #11724. SVN-Revision: 34324	2012-11-24 20:24:27 +00:00
Hauke Mehrtens	c62d86ecb8	brcm47xx: update watchdog driver This watchdog driver should work with SoC having a PMU. This fixes #11720. SVN-Revision: 34323	2012-11-24 20:07:25 +00:00
Hauke Mehrtens	4fa5781a95	kernel: refresh patches SVN-Revision: 34253	2012-11-18 21:40:30 +00:00
Hauke Mehrtens	86cc79ac98	brcm47xx: add support for kernel 3.6 This is based on the patch by Peter Wagner. SVN-Revision: 34252	2012-11-18 21:27:00 +00:00
Hauke Mehrtens	485f9573f8	brcm47xx: revert r33935: check for .ELF header in partition parser For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE. russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420. With the patch the linux partition also contained the loader which is in the first 128KB. SVN-Revision: 34201	2012-11-15 16:39:45 +00:00
Hauke Mehrtens	31541f81c3	brcm47xx: remove double definition of kmod-tg3 added in r34150 SVN-Revision: 34176	2012-11-12 21:34:00 +00:00
Hauke Mehrtens	bac93bdd8e	brcm47xx: fix cfe config detection on WGT634U broken in r33920 Thanks Russell Senior for reporting this. SVN-Revision: 34175	2012-11-12 21:32:33 +00:00
Hauke Mehrtens	cadd36a303	brcm47xx: remove ssb-gige package CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more. The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package. SVN-Revision: 34150	2012-11-11 17:30:33 +00:00
Imre Kaloz	702fd5cdb5	generate images for the D-Link DWL-3150 as well SVN-Revision: 33961	2012-10-27 09:42:58 +00:00
Hauke Mehrtens	6a699a8ae8	brcm47xx: check for .ELF header in partition parser The image format for the wgt634u is different from the normal format. Without this patch the partition parser detects a 128kb bigger partition after every update. This closes #11420 Thank you b.sander for the patch. SVN-Revision: 33935	2012-10-25 19:49:20 +00:00
Hauke Mehrtens	dca633f1c8	kernel: update bcma and ssb to master-2012-10-18 from wireless-testing * update the flash driver for bcm47xx to use the stubs already in bcma * do some misc enhancements to the flash drivers for bcm47xx SVN-Revision: 33920	2012-10-25 14:33:47 +00:00
Jonas Gorski	0d2cf5f9e3	kernel: move the bcma fallback sprom fix to generic bcm63xx needs the bcma fallback sprom fix, too. SVN-Revision: 33896	2012-10-23 10:57:49 +00:00
John Crispin	6993e19532	drop GPIODEV platform code SVN-Revision: 33825	2012-10-17 21:53:37 +00:00
Hauke Mehrtens	07234dc8bd	bcma: do not initialize deactivated PCIe cores Before it was tried to initialize the deactivated PCIe core in client mode, but this causes the SoC to hang. Just do not initialize it at all and ignore the core it is not working and nothing is connected to it when the specific bit is set in the boardflags. SVN-Revision: 33620	2012-10-04 15:45:54 +00:00
Hauke Mehrtens	2819890839	use memcmp in mem size detection as suggested by blogic SVN-Revision: 33619	2012-10-04 15:42:12 +00:00
Hauke Mehrtens	642fe7f10a	bcma: use fallback sprom if sprom on card was not valid Sometimes the PCIe card indicates that it has a sprom somewhere and we are able to read the memory region, but it is empty and not valid. In these cases we should try to use the fallback sprom as a last chance. SVN-Revision: 33601	2012-09-30 11:45:31 +00:00
Hauke Mehrtens	42952fd94f	bcma: initialize sprom earlier The chip common and the PCIe code are accessing the sprom struct which is not filled when these cores are initialized. Fix this by adding an early initialize and fill the sprom struct before accessing it in other code. SVN-Revision: 33600	2012-09-30 11:44:44 +00:00
Hauke Mehrtens	2d40590a23	run make kernel_oldconfig SVN-Revision: 33599	2012-09-30 11:44:04 +00:00
Hauke Mehrtens	e5eefed084	ignore the last page on bcma based SoCs SVN-Revision: 33598	2012-09-30 11:43:40 +00:00
Hauke Mehrtens	c9feffc332	Fix reading sprom from nvram without a prefix The bcma based SoCs with a ieee80211 core on the SoC and an other connected via PCIe or USB store the sprom for the SoC with a sb/1/ prefix. The SoC with just one wifi core do not use prefixes. The BCM4706 do not use a prefix for the SoC part at all, because the prefix is the path to the ieee80211 core and there is non on the BCM4706. SVN-Revision: 33597	2012-09-30 11:43:13 +00:00
Hauke Mehrtens	4d5c75a54e	improve the check for the memory size This will hopefully fix bug #9360 and #9097 in trunk. SVN-Revision: 33596	2012-09-30 11:42:16 +00:00
Hauke Mehrtens	0818180715	activate failsafe on all ports of the switch and not just port 0. Sometimes the port 0 was the WAN port or there could be some device where the port 0 is not wired to an actual Ethernet port. Now telnet in failsafe will listen on all ports of the switch so user do not have to search for the correct port any more. This change will make the switch leak traffic between the WAN and the LAN port, but you should not use failsafe while connected to a untrusted network. SVN-Revision: 33544	2012-09-25 14:04:59 +00:00
Hauke Mehrtens	fd7b2b5141	deactivate mips wait instruction for MIPS 74K on Broadcom SoCs When not removing support for the wait instruction, when ruining on the BCM4706 SoC the system stops after msleep() without an exception. I haven't seen this problem on the other Broadcom SoCs with a 74K CPU, but in the Broadcom SDK it is deactivated for all CPUs of this type. SVN-Revision: 33496	2012-09-20 14:51:57 +00:00
Florian Fainelli	57bd95734d	brcm47xx/profiles/PS-1208MFG: remove reference to non-existing package The package block-hotplug doesn't exist, refer to block-mount instead. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33474	2012-09-19 15:13:33 +00:00
Hauke Mehrtens	db18fa388d	update fix-boot patch. Do not change the code any more but use the kconfig options SVN-Revision: 33463	2012-09-19 10:18:36 +00:00
Hauke Mehrtens	eeb3ad1860	update gpio patches SVN-Revision: 33462	2012-09-19 10:17:51 +00:00
Gabor Juhos	43147ffec5	generic: move GENERIC_PWM symbol into the generic config SVN-Revision: 33383	2012-09-13 06:38:31 +00:00
Hauke Mehrtens	95c141aaac	add gpio sysfs entries This fixes #10256 SVN-Revision: 33369	2012-09-11 15:04:20 +00:00
Hauke Mehrtens	847afa343f	update profiles * add profile for BCM4705 based SoC using tg3 instead of b44 * remove redundant 105-Atheros.mk * reorder SVN-Revision: 33235	2012-08-22 21:54:06 +00:00
Hauke Mehrtens	3133d4d8de	remove unused file SVN-Revision: 33210	2012-08-18 15:45:18 +00:00
Hauke Mehrtens	9eaee85cc2	make brcm47xx build only with bcma or only with ssb support. There are some ifdefs missing so when only ssb or only bcma was selected in the kernel config it did not build. SVN-Revision: 33209	2012-08-18 14:08:35 +00:00
Hauke Mehrtens	f4d6baf498	update gpio patches SVN-Revision: 33208	2012-08-18 11:51:35 +00:00
Hauke Mehrtens	a0fb060211	update tg3 driver SVN-Revision: 33004	2012-08-05 20:27:40 +00:00
Hauke Mehrtens	35661401da	generate image for Linksys e3200 SVN-Revision: 33003	2012-08-05 13:14:00 +00:00
Hauke Mehrtens	a71f347c30	brcm47xx: update gpio patch SVN-Revision: 33001	2012-08-05 12:40:05 +00:00
Hauke Mehrtens	1d40a652ee	brcm47xx: fix patch which moves the flash struct in wgt634u code SVN-Revision: 33000	2012-08-05 12:39:15 +00:00
Hauke Mehrtens	0758996824	brcm47xx: use libgpio instaed of implementing the gpio interface ourself. SVN-Revision: 32992	2012-08-04 19:46:25 +00:00
Hauke Mehrtens	0c75abf527	bcma: update to version from wireless-testing tag master-2012-07-16 I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it. This also contains 3 additional patches fixing some bugs in bcma. SVN-Revision: 32880	2012-07-26 15:42:18 +00:00
Florian Fainelli	c7a69869f7	move ubsec-ssb driver to target specific modules.mk SVN-Revision: 32863	2012-07-25 15:50:38 +00:00
Florian Fainelli	d1b2087a35	move ssb-gige to target specific modules.mk SVN-Revision: 32862	2012-07-25 15:50:36 +00:00
Florian Fainelli	c14d907b8b	move usb driver to target specific modules.mk SVN-Revision: 32861	2012-07-25 15:50:33 +00:00
Hauke Mehrtens	e0837a51f0	brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first. SVN-Revision: 32845	2012-07-25 14:52:00 +00:00
Hauke Mehrtens	45d55161a6	kernel: bcma: update to version from wireless-testing tag master-2012-07-11 SVN-Revision: 32670	2012-07-11 22:17:05 +00:00
Hauke Mehrtens	bd9fa13c73	kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02 SVN-Revision: 32580	2012-07-02 23:12:58 +00:00
Felix Fietkau	50958f5e03	kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk SVN-Revision: 32395	2012-06-16 21:06:33 +00:00
John Crispin	a4d96aae8d	bump to 3.3.8 SVN-Revision: 32055	2012-06-05 06:57:51 +00:00
Gabor Juhos	2ae5581447	kernel: update linux 3.3 to 3.3.7 SVN-Revision: 31848	2012-05-23 21:05:32 +00:00
Hauke Mehrtens	c63ef04874	brcm47xx: fix nvram read out on devices with serial flash detect nvram on Linksys E3200 SVN-Revision: 31790	2012-05-18 16:04:10 +00:00
Hauke Mehrtens	7ad663dda6	brcm47xx: bcma: fix null pointer SVN-Revision: 31789	2012-05-18 15:46:30 +00:00
Hauke Mehrtens	b4ecf522cd	brcm47xx: ssb: recognize ARM Cortex M3 SVN-Revision: 31788	2012-05-18 15:45:51 +00:00
Hauke Mehrtens	7be88d2ad8	brcm47xx: some fixes for the USB driver SVN-Revision: 31787	2012-05-18 15:44:25 +00:00
Hauke Mehrtens	273797f15a	kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2 SVN-Revision: 31772	2012-05-17 13:22:38 +00:00
Hauke Mehrtens	3491d8c017	brcm47xx: remove support for kernel 3.2 SVN-Revision: 31771	2012-05-17 13:20:10 +00:00
Gabor Juhos	39994008cb	linux: move certain disabled symbols to the generic configs * CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO SVN-Revision: 31737	2012-05-15 10:58:52 +00:00
Gabor Juhos	b472e5d12e	kernel: update linux 3.3 to 3.3.6 SVN-Revision: 31709	2012-05-14 09:18:32 +00:00
Hauke Mehrtens	482b99a660	brcm47xx: generate image for Linksys WRT610N V1 SVN-Revision: 31696	2012-05-13 00:16:57 +00:00
Hauke Mehrtens	5acb0b72be	brcm47xx: fix tg3 ssb patch Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again). SVN-Revision: 31694	2012-05-12 23:59:12 +00:00
Gabor Juhos	34018a630f	kernel: update linux 3.3 to 3.3.5 SVN-Revision: 31645	2012-05-07 20:11:43 +00:00
Hauke Mehrtens	d30f8da466	brcm47xx: add gpio_request_one() This fixes a compile error with kernel 3.3. SVN-Revision: 31635	2012-05-06 20:44:37 +00:00
Hauke Mehrtens	8c352ff853	brcm47xx: update target to kernel 3.3 SVN-Revision: 31599	2012-05-05 12:53:37 +00:00
Hauke Mehrtens	22b2e3fbb9	brcm47xx: add support for kernel 3.3 SVN-Revision: 31573	2012-05-03 20:18:41 +00:00
Hauke Mehrtens	d7b7b99d6e	brcm47xx: BCMA - Modified PCI CFG space access The existing code (prior to the patch) does an "ioremap_nocache" on a subset of a memory region that I think has already been mapped, and then un-maps that smaller region when it is finished. Thanks Nathan Hintz for the patch SVN-Revision: 31481	2012-04-25 20:32:17 +00:00
Hauke Mehrtens	e90d3f1663	brcm47xx: A couple of other (inconsequential) BCMA patches Noticed these while reviewing the code. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 31471	2012-04-24 21:56:42 +00:00
Hauke Mehrtens	b07998cf11	brcm47xx: b44 fix workaround detection on some brcm47xx boards Because of api change of nvram_getenv, the workaround failed to detect the hardware. Based on patch by b.sander Fixes #11268. SVN-Revision: 31470	2012-04-24 20:35:46 +00:00
Jonas Gorski	22b4e6b882	kernel: update linux 3.2 to 3.2.16 SVN-Revision: 31459	2012-04-24 09:25:35 +00:00
Jonas Gorski	a8f2bc682e	kernel: also update the targets to use 3.2.15 Thanks Gabor for spotting it. SVN-Revision: 31337	2012-04-17 13:12:14 +00:00
Jonas Gorski	ee4c47a134	kernel: update linux 3.2 to 3.2.15 SVN-Revision: 31335	2012-04-17 12:50:54 +00:00
Hauke Mehrtens	7475bb3dc6	brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs. bcma: use fallback sprom if no on chip sprom is available SVN-Revision: 31285	2012-04-14 12:12:22 +00:00
Hauke Mehrtens	6af575967c	kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing SVN-Revision: 31278	2012-04-13 19:35:40 +00:00
Hauke Mehrtens	c75e700d42	brcm47xx: remove support for kernel 3.0 SVN-Revision: 31276	2012-04-13 16:53:16 +00:00
Jonas Gorski	16b4cbcdd6	kernel: update linux 3.2 to 3.2.14 SVN-Revision: 31222	2012-04-09 14:48:51 +00:00
Jonas Gorski	d87efd8c3c	kernel: update linux 3.2 to 3.2.13 and refresh patches Also remove a duplicate patch from lantiq (already in generic). SVN-Revision: 31158	2012-04-01 07:56:55 +00:00
Hauke Mehrtens	de0527a354	brcm47xx: fix memory leak, backport from the mainline kernel SVN-Revision: 31143	2012-03-29 15:44:06 +00:00
Hauke Mehrtens	9992ce3a51	brcm47xx: add missing breaks into the nvram read code in the switch case statements SVN-Revision: 31142	2012-03-29 15:43:16 +00:00
Hauke Mehrtens	13b6ec1d05	brcm47xx: update flash drivers SVN-Revision: 31126	2012-03-28 17:03:18 +00:00
Hauke Mehrtens	2f6e19e203	brcm47xx: BCMA - Consolidate/reduce code in bcma_device_name Eliminate unneeded procedure by incorporating code into bcma_device_name Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 31120	2012-03-28 09:36:50 +00:00
Hauke Mehrtens	a31a9b8650	brcm47xx: BCMA - Always map 4 bytes This probably doesn't matter, but reads/writes are always 4 bytes, so always map 4 bytes. Changes since v1: Moved changes to new patch file (234-bcma-always-map-4-bytes.patch). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 31119	2012-03-28 09:35:01 +00:00
Hauke Mehrtens	a5abb08100	brcm47xx: update sprom patches like they are in the mainline kernel SVN-Revision: 31093	2012-03-27 17:07:28 +00:00
Hauke Mehrtens	6fd915ba37	brcm47xx: update usb driver to the version send for mainline kernel integartion SVN-Revision: 31089	2012-03-27 15:38:56 +00:00
Gabor Juhos	c1dc6df8bd	kernel: update linux 3.2 to 3.2.12 SVN-Revision: 31028	2012-03-19 18:23:31 +00:00
Felix Fietkau	db6e326c56	targets: replace madwifi in profiles with ath5k, madwifi is unmaintained SVN-Revision: 31015	2012-03-19 09:58:13 +00:00
Hauke Mehrtens	cee31ca238	brcm47xx: add support for NAND flash on devices using bcma This patch add support for the NAND flash on BCM5357 based devices like the WNR3500Lv2. Thank you Tathagata Das <tathagata@alumnux.com> for the patch SVN-Revision: 30943	2012-03-14 22:59:39 +00:00
Hauke Mehrtens	7fee567dc0	brcm47xx: move and rename the patches The patches are now grouped by the part what they are doing and are using three digest numbers. This does not remove or adds anything SVN-Revision: 30942	2012-03-14 21:48:23 +00:00
Hauke Mehrtens	067a065305	brcm47xx: make patch apply SVN-Revision: 30876	2012-03-11 13:36:46 +00:00
Hauke Mehrtens	7dcdf69388	brcm47xx: BCMA - Find names of non BCM cores Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 30875	2012-03-11 12:55:20 +00:00
Hauke Mehrtens	d6d40b2d60	BCMA - Account for variable PCI memory base/size Thank you Nathan Hintz for the patch SVN-Revision: 30874	2012-03-11 12:52:43 +00:00
Hauke Mehrtens	bbf739a59f	BCMA - Reorder SPROM fill The SPROM is initialized in bcm47xx_fill_sprom, so move the call to bcm47xx_fill_sprom_ethernet after it. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 30873	2012-03-11 11:50:59 +00:00
Gabor Juhos	9698a499b6	kernel: update linux 3.2 to 3.2.9 SVN-Revision: 30767	2012-03-01 19:49:02 +00:00
Hauke Mehrtens	12537aa190	brcm47xx: use kernel 3.2 by default SVN-Revision: 30751	2012-02-28 20:12:46 +00:00
Hauke Mehrtens	5dec9dd3b2	brcm47xx: add code to generate images for some netgear devices This is commented out until we get report of working devices. SVN-Revision: 30639	2012-02-18 23:21:47 +00:00
Hauke Mehrtens	1122b231f9	brcm47xx: sprom for nvram parsing This adds support for parsing sprom form nvram for sprom version form 1 to 9. It also adds sprom from nvram support for devices on the bcma bus. SVN-Revision: 30638	2012-02-18 23:08:26 +00:00
Hauke Mehrtens	30408f1cc4	brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed. SVN-Revision: 30488	2012-02-12 22:41:20 +00:00
Hauke Mehrtens	e7bd7f7e85	brcm47xx: activate config bug to show warnings SVN-Revision: 30487	2012-02-12 22:40:01 +00:00
Hauke Mehrtens	fa21aef5ab	brcm47xx: refresh patches SVN-Revision: 30481	2012-02-12 16:45:27 +00:00
Hauke Mehrtens	838c363886	brcm47xx: update usb driver for brcm47xx. SVN-Revision: 30480	2012-02-12 16:38:10 +00:00
Hauke Mehrtens	295a154f2f	brcm47xx: print the chip id and rev found by ssb and bcma SVN-Revision: 30428	2012-02-10 22:42:43 +00:00
Hauke Mehrtens	4e332227d0	brcm47xx: update bcm5354 support patch SVN-Revision: 30423	2012-02-10 17:22:26 +00:00
Jonas Gorski	e67f4477bb	kernel: update linux 3.0 to 3.0.18 SVN-Revision: 29965	2012-01-31 09:43:53 +00:00
Hauke Mehrtens	d1c07b3657	brcm47xx: add fix for cardbus host controller These devices have two devices on the bus, the host controller itself and the device. SVN-Revision: 29923	2012-01-27 20:10:51 +00:00
Hauke Mehrtens	26d4e1876c	brcm47xx: add support for pcie host controller on bcma based SoCs. This also adds minimal support for the BCMA43224 pcie wireless card. SVN-Revision: 29843	2012-01-21 22:39:20 +00:00
Hauke Mehrtens	034cf5643f	brcm47xx: add support for kernel 3.2 SVN-Revision: 29756	2012-01-15 21:18:34 +00:00
Hauke Mehrtens	c3d134af12	brcm47xx: run kernel_oldconfig SVN-Revision: 29755	2012-01-15 14:53:32 +00:00
Hauke Mehrtens	d5bc3a994b	brcm47xx: update usb driver Add workarround for BCM5357 and BCM4749. This patch contains the following fixes from George Kashperko: * separate subroutines for controller initialization workarounds - following CodingStyle recommendations; * __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG; * fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being kmalloc'ed is never freed anywhere while platform_device_add_resources will kmemdup resources right away; * fix compilation error in ssb_hcd_resume - it will fail as soon as CONFIG_PM is selected. SVN-Revision: 29734	2012-01-13 20:11:23 +00:00
Jonas Gorski	e49d3e1d5b	kernel: update linux 3.0 to 3.0.17 SVN-Revision: 29725	2012-01-13 14:10:44 +00:00
Hauke Mehrtens	11125d68ed	brcm47xx: fix usb on more recent bcma based devices. SVN-Revision: 29605	2011-12-23 17:21:52 +00:00
Hauke Mehrtens	0cd03df3b1	brcm47xx: remove patch starting adding brcm4716 to ssb brcm4716 is supported by bcma now we do not need this patch SVN-Revision: 29576	2011-12-19 23:55:20 +00:00
Hauke Mehrtens	5b8686c303	brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more. SVN-Revision: 29575	2011-12-19 23:39:13 +00:00
Hauke Mehrtens	1aa5a61754	kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing SVN-Revision: 29574	2011-12-19 23:33:03 +00:00
Hauke Mehrtens	91d0ef6f19	brcm47xx: remove support for kernel 2.6.39 There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches. SVN-Revision: 29573	2011-12-19 23:26:15 +00:00
Jonas Gorski	6e2ae90f4a	linux: update 3.0 to 3.0.12 SVN-Revision: 29469	2011-12-06 19:50:25 +00:00
Jonas Gorski	8bac0df4ae	linux: update 3.0 to 3.0.9 SVN-Revision: 29264	2011-11-19 18:39:12 +00:00
Jo-Philipp Wich	de7cae82e9	brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit SVN-Revision: 28585	2011-10-25 16:19:52 +00:00
Jo-Philipp Wich	a9e64493d8	target: globally disable BSD process accounting SVN-Revision: 28584	2011-10-25 16:18:36 +00:00
Florian Fainelli	3802769ea1	add vlan definitions for Siemens SE505v2 Hi, this patch adds the correct vlan definitions for the Siemens SE505v2. It applies to trunk as well as backfire (please apply here too). On backfire this also patches brcm-2,4, because brcm47xx base-files is just symlinked to brcm-2.4. It also fixes two whitespace issues. Tested with brcm47xx on both trunk and backfire branch and works as expected. Signed-off-by: Manuel Munz <freifunk@somakoma.de> SVN-Revision: 28336	2011-09-30 12:55:33 +00:00
Felix Fietkau	24dfe525c2	brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default SVN-Revision: 28125	2011-08-29 21:23:51 +00:00
Hauke Mehrtens	464539b074	kernel: update to version 3.0.3 SVN-Revision: 28043	2011-08-18 12:54:12 +00:00
Jo-Philipp Wich	ebb152295b	fix the default network configuration for the ASUS WL-330gE (#8751 ) SVN-Revision: 28024	2011-08-17 03:16:59 +00:00
Hauke Mehrtens	77218b0338	brcm47xx: fix flash detection on chipcommon less devices. This closes #9906 Thank you for the report Kim SVN-Revision: 27967	2011-08-12 16:37:22 +00:00
Hauke Mehrtens	51be984655	kernel: update to kernel version 3.0.1 SVN-Revision: 27918	2011-08-06 09:51:55 +00:00
Hauke Mehrtens	77966b81d8	brcm47xx: use kernel 3.0 As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported. SVN-Revision: 27906	2011-08-04 20:10:24 +00:00
Hauke Mehrtens	8428ebd8e8	brcm47xx: update patches * this adds sflash support for ssb devices * the flash is now a platform device * minor updates SVN-Revision: 27902	2011-08-04 20:04:54 +00:00
Hauke Mehrtens	4815eaa4c3	brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but this causes a data bus error (oops) on a SoC. SVN-Revision: 27758	2011-07-24 15:18:29 +00:00
Hauke Mehrtens	49f4d4217e	brcm47xx: build bcma into the kernel Now we can assume that every brcm47xx kernel has the bcma module build into the kernel. This is not needed for this version as this does not support bcma as system bus but kernel 3.0 will. SVN-Revision: 27733	2011-07-23 11:19:58 +00:00
Hauke Mehrtens	b07b5fc7b6	brcm47xx: remove old kernel versions SVN-Revision: 27724	2011-07-22 18:41:24 +00:00
Hauke Mehrtens	b988168906	brcm47xx: update bcma and ssb to master-2011-07-21 * add new patches for bcm4716 SoC * add support for serial flash on bcma bus SVN-Revision: 27723	2011-07-22 16:30:42 +00:00
Hauke Mehrtens	39f491e479	kernel: update to linux-3.0 and refresh patches. Thank you Peter Wagner for the patch SVN-Revision: 27722	2011-07-22 16:04:25 +00:00
Hauke Mehrtens	8976fa2622	brcm47xx: deactivate wndr3400 for now as this device will not boot SVN-Revision: 27316	2011-06-29 17:42:34 +00:00
Hauke Mehrtens	8c62c5d109	brcm47xx: generate image to flash on Netgear WNDR3400. The image will not boot because serial flash support is missing this is only for experts. SVN-Revision: 27302	2011-06-28 22:23:21 +00:00
Hauke Mehrtens	4c18da3df6	brcm47xx: add initial support for devices with bcma bus. Ethernet and wifi are not working and this is highly experimental. SVN-Revision: 27301	2011-06-28 22:21:57 +00:00
Hauke Mehrtens	3f0eed15a2	kernel: refresh patches for kernel 3.0-rc5 SVN-Revision: 27300	2011-06-28 20:25:39 +00:00
Hauke Mehrtens	2af4f6f634	kernel: update ssb and bcma to linux-next next-20110628 SVN-Revision: 27299	2011-06-28 19:33:50 +00:00
Hauke Mehrtens	c5821c1a3a	kernel: update kernel to 2.6.39.2 SVN-Revision: 27298	2011-06-28 19:30:58 +00:00
Hauke Mehrtens	4c392185a6	brcm47xx: update kernel to version 2.6.39 SVN-Revision: 27296	2011-06-27 21:29:20 +00:00
Hauke Mehrtens	ca979845cc	kernel: update ssb and bcma to linux-next next-20110627 SVN-Revision: 27295	2011-06-27 21:28:40 +00:00
Hauke Mehrtens	e439de144f	brcm47xx: fix Linux-3.0 and fix clock rate detection. SVN-Revision: 27294	2011-06-27 20:20:11 +00:00
Hauke Mehrtens	47e218c426	brcm47xx: refresh patches SVN-Revision: 27219	2011-06-18 15:53:14 +00:00
Hauke Mehrtens	79a7343560	kernel: update to kernel 2.6.38.8 SVN-Revision: 27218	2011-06-18 15:52:15 +00:00
Hauke Mehrtens	75f9e0c615	brcm47xx: add support for kernel 3.0 SVN-Revision: 27217	2011-06-18 15:24:44 +00:00
Hauke Mehrtens	bf64ac730a	bcm47xx: Remove kernel checks from image Makefile 2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the 2.6 check will break with 3.0, remove it alltogether. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27185	2011-06-15 21:11:49 +00:00
Hauke Mehrtens	8137e35a5d	brcm47xx: initial 2.6.39 support for brcm47xx Thank you Peter Wagner for the patch SVN-Revision: 27008	2011-05-25 19:27:08 +00:00
Hauke Mehrtens	f5f989e3fb	brcm47xx: remove old kernel SVN-Revision: 27006	2011-05-25 18:05:54 +00:00
Hauke Mehrtens	06166b01dd	brcm47xx: fix partition layout on SimpleShare devices. The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here. This fixes #9323 Thank you Will Holmes for the patch. SVN-Revision: 27005	2011-05-25 17:46:34 +00:00
Hauke Mehrtens	732abc44cc	brcm47xx: update patches SVN-Revision: 26846	2011-05-07 12:49:17 +00:00
Hauke Mehrtens	fcb1557a3e	brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. SVN-Revision: 26829	2011-05-05 14:05:21 +00:00
Hauke Mehrtens	54fb8868fa	brcm47xx: fix typo in patch SVN-Revision: 26828	2011-05-05 13:18:35 +00:00
Hauke Mehrtens	3dbb8c5088	brcm47xx: add fallback sprom for pci devices without an own sprom. If there is no sprom on an ssb based pci device on the brcm47xx architecture ssb now asks the architecture code to look into the nvram to get some sprom data for this device. Now we are able to read out pci/1/1/ foo or pci/1/3/ foo config options. This will fix some problems where the wireless devices does not got an mac address and the following message was show: ssb: WARNING: Invalid SPROM CRC (corrupt SPROM) SVN-Revision: 26801	2011-05-01 20:28:35 +00:00
Hauke Mehrtens	8b837430f3	brcm47xx: upgrade to kernel 2.6.27.6. This should be save now. SVN-Revision: 26533	2011-04-08 15:12:08 +00:00
Hauke Mehrtens	340c6914a3	brcm47xx: add initial support for kernel 2.6.38 SVN-Revision: 26524	2011-04-07 21:38:41 +00:00
Hauke Mehrtens	8d75dcb4b8	brcm47xx: remove kmod-usb-ohci from WGT634U packages. This package creates some error messages on startup Thank you russell-- for reporting SVN-Revision: 26240	2011-03-19 23:19:08 +00:00
Imre Kaloz	a8d84ae94d	remove 2.6.34 support SVN-Revision: 26229	2011-03-18 13:40:48 +00:00
Hauke Mehrtens	537c6017cc	brcm47xx: add workaround for fuse again. This closes #4754 SVN-Revision: 26141	2011-03-13 19:25:24 +00:00
Hauke Mehrtens	a08bd03fad	ssb: update ssb to version from linux-next-20110311 SVN-Revision: 26127	2011-03-13 17:24:28 +00:00
Hauke Mehrtens	4226f1d373	kernel: update to kernel version 2.6.37.3 SVN-Revision: 26126	2011-03-13 17:14:08 +00:00
Hauke Mehrtens	425bf41b23	kernel: update to kernel version 2.6.34.8 SVN-Revision: 26125	2011-03-13 17:13:11 +00:00
Florian Fainelli	45c9f5e75e	update to kernel 2.6.36.4 SVN-Revision: 25580	2011-02-19 12:44:07 +00:00
Imre Kaloz	2821101c92	platform specific patches don't belong here - take #2 SVN-Revision: 25085	2011-01-24 12:11:25 +00:00
Imre Kaloz	7c9d132d10	platform specific patches don't belong here SVN-Revision: 25083	2011-01-24 11:01:38 +00:00
Gabor Juhos	541bebf4ec	brcm47xx: add gpio_set_debounce function SVN-Revision: 24968	2011-01-11 20:05:01 +00:00
Hauke Mehrtens	d6af00c555	brcm47xx: fix compile problem when serial is deactivated. Thank you Andrey SVN-Revision: 24885	2011-01-02 20:53:09 +00:00
Hauke Mehrtens	acb5e80846	kernel: add config option added in kernel 2.6.37-rc7 to generic and run make kernel_oldconfig for brcm47xx. SVN-Revision: 24805	2010-12-22 19:44:54 +00:00
Hauke Mehrtens	4bee3672dd	brcm47xx: refresh patches with kernel 2.6.37-rc7 The deleted patches went upstream in 2.6.37-rc7 SVN-Revision: 24803	2010-12-22 19:42:37 +00:00
Hauke Mehrtens	93e09b14eb	brcm47xx: wgt634u mac address fix The Netgear wgt634u uses minus between the hex digest of the mac address and all other broadcom devices are using colons between the hex digest. Now the mac address is correctly parsed also when minus is used. SVN-Revision: 24749	2010-12-21 13:34:09 +00:00
Hauke Mehrtens	9daa5485ba	brcm47xx: add ssb debug option. This fixes a problem with wrt350n. It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS" Thank you sn9 for fixing this problem. SVN-Revision: 24626	2010-12-16 19:35:59 +00:00
Hauke Mehrtens	1da5dcbb7a	brcm47xx: add some missing pci ID for tg3 driver Broadcom removed these pci id, but at least the wrt350n has a Ethernet controller with a pci id of 14e4:1676 Thank you sn9 for fixing this problem. SVN-Revision: 24625	2010-12-16 19:31:05 +00:00
Hauke Mehrtens	c58d8a369c	brcm47xx: this patch went upstream SVN-Revision: 24624	2010-12-16 19:26:55 +00:00
Hauke Mehrtens	b8ab3d34eb	kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2 SVN-Revision: 24486	2010-12-11 16:07:21 +00:00
Hauke Mehrtens	2f7964de3e	brcm47xx: do not read from CFE SVN-Revision: 24267	2010-12-05 19:20:26 +00:00
Hauke Mehrtens	852f7b37ed	brcm47xx: backport patch from kernel 2.6.37 Backport patches from r24162 brcm47xx: reorder patches like they were commitet upstream SVN-Revision: 24266	2010-12-05 19:19:50 +00:00
Hauke Mehrtens	7b1ae48645	brcm47xx: use on common files dir SVN-Revision: 24264	2010-12-05 18:34:58 +00:00
Hauke Mehrtens	41b3383499	brcm47xx: Add edimax PS1208mfg support Thank you clemvangelis for the patches. (closes #7672) SVN-Revision: 24217	2010-12-02 21:27:54 +00:00
Hauke Mehrtens	af2349b4bc	brcm47xx: remove support for old kernel versions SVN-Revision: 24168	2010-11-28 14:08:04 +00:00
Hauke Mehrtens	6f58cc20fc	brcm47xx: use kernel 2.6.36.1 as new default kernel for this target. SVN-Revision: 24167	2010-11-28 14:05:31 +00:00
Hauke Mehrtens	fb27da9487	brcm47xx: reorder patches like they were commitet upstream SVN-Revision: 24162	2010-11-27 22:47:11 +00:00
Alexandros C. Couloumbis	8f94a9a224	linux/brcm47xx: sync yhe BCM4710 fix with the upcoming upstream patch. SVN-Revision: 24116	2010-11-23 16:41:34 +00:00
Alexandros C. Couloumbis	16dd69760f	linux/brcm47xx: add missing patch on r24112 SVN-Revision: 24113	2010-11-23 14:12:42 +00:00
Alexandros C. Couloumbis	40b5fad48d	linux/brcm47xx: Broadcom BCM4710 does not belong in the BMIPS4KC family. SVN-Revision: 24112	2010-11-23 14:08:41 +00:00
Alexandros C. Couloumbis	26df9231fa	linux/brcm47xx: properly fix r24096 SVN-Revision: 24102	2010-11-22 18:16:55 +00:00
Alexandros C. Couloumbis	aab31771f8	linux/brcm47xx: mainline 2.6.37 602977b0d672687909b0cb0542ede134ed6ef858 commit broke CPU revision: 00024000, MIPS (cc 0x805, rev 0x00, vendor 0x4243) functionality. Revert that patch until we get a proper fix. SVN-Revision: 24096	2010-11-22 17:17:15 +00:00
Alexandros C. Couloumbis	18dd104885	linux/brcm47xx: include a missing 2.6.37 file (thank you hauke) SVN-Revision: 23955	2010-11-11 08:49:52 +00:00
Hauke Mehrtens	ce547cf748	brcm47xx: missing in r23949 SVN-Revision: 23950	2010-11-10 19:12:49 +00:00
Hauke Mehrtens	1652eb7863	brcm47xx: CONFIG_HAMRADIO=n makes no sense SVN-Revision: 23949	2010-11-10 19:11:24 +00:00
Alexandros C. Couloumbis	f950840ec9	linux/brcm47xx: add preliminary 2.6.37 kernel support SVN-Revision: 23945	2010-11-10 19:01:07 +00:00
Hauke Mehrtens	4e797b6278	brcm47xx: Fix boot problem with wgt634u. Readd the workarround from the old version again which was removed in r22296 and refresh the patches. This should close #7874 Thank you Russell Senior for testing. SVN-Revision: 23911	2010-11-07 13:44:48 +00:00
Florian Fainelli	cb0e742bab	Revert "[brcm47xx] Add support for cores with slow WDT clock (bcm5354)" This reverts commit 7467fdab387f451082c15d17ce9ae4d91d74b6ca. SVN-Revision: 23533	2010-10-19 07:07:10 +00:00
Florian Fainelli	c8c0d4d8e6	Add support for cores with slow WDT clock (bcm5354) Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs> SVN-Revision: 23516	2010-10-18 19:49:48 +00:00
Alexandros C. Couloumbis	9cb3333c0d	linux/brcm47xx: fix an initialization issue on 2.6.36 kernel SVN-Revision: 23392	2010-10-11 12:37:16 +00:00
Hauke Mehrtens	badd8ffee3	brcm47xx: add patches for kernel 2.6.36 SVN-Revision: 23278	2010-10-06 20:11:03 +00:00
Imre Kaloz	5f9a6a5431	upgrade kernel versions to the latest stable ones SVN-Revision: 23219	2010-10-04 10:40:41 +00:00
Florian Fainelli	69120f3f47	update to 2.6.34.5 SVN-Revision: 22768	2010-08-22 17:08:37 +00:00
Hauke Mehrtens	09e05d833d	kernel: update kernel version to 2.6.34.5 SVN-Revision: 22759	2010-08-22 13:26:06 +00:00
Hauke Mehrtens	26f323dcf5	brcm47xx: do not read out cfe Reading the CFE properties causes system hangs on some devices. With this patch nvram read will be successful very time so cfe will no be read out. This code is not really correct but it will work around some problems for some people. Related ticket: #7693 SVN-Revision: 22663	2010-08-15 18:23:17 +00:00
Alexandros C. Couloumbis	0780aa2278	brcm47xx/patches-2.6.35: Allow SSB EHCI/OHCI drivers to co-exist (thank you Steve Brown) SVN-Revision: 22661	2010-08-15 16:30:00 +00:00
Hauke Mehrtens	09244c0811	brcm47xx: do not generate image for wgr614_v8 as long as we did not get any positive reports with that device. SVN-Revision: 22522	2010-08-06 22:50:58 +00:00
Hauke Mehrtens	7640f89045	brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2 Thank you realopty for the patch. tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/ This closes #7702. SVN-Revision: 22516	2010-08-06 20:21:32 +00:00
Hauke Mehrtens	86b209211e	brcm47xx: ignore some parts of flash on some netgear devices. This space is used to store config values. When overwriting it the device will not start any more. closes #7630 Thank you realopty for testing. SVN-Revision: 22475	2010-08-03 20:35:53 +00:00
Hauke Mehrtens	3aca383c72	brcm47xx: some checkpatch fixes SVN-Revision: 22425	2010-07-31 10:06:05 +00:00
Hauke Mehrtens	96911f6b58	brcm47xx: some fixes * fix return codes of nvram_getenv. Now it behaves like cfe_getenv. * also check cfe for kernel_args param. * some style fixes SVN-Revision: 22424	2010-07-31 10:05:29 +00:00
Hauke Mehrtens	da7493d8f9	mostly revert commit r22396 CFE does not boot images generated with these checksums because of wrong checksum. After flashing then with tftp to my Asus wl500-GPv1 the following messages are show: Null Rescue Flag. Boot program checksum is invalid Hello!! Enter Rescue Mode: (Check error) SVN-Revision: 22418	2010-07-30 21:19:49 +00:00
Markus Wigge	7a052dc799	fix CRC32 calculation for sysupgrade * reduce image size for CRC calculation by fs_mark size sysupgrade sometimes failed for me and I noticed that it was due to incorrect CRC values in trx-header after performing it. It seems that the fs_mark was completely included in the calculation and that it was nevertheless modified by sysupgrade while appending the jffs data. This only occurs for the first boot after sysupgrade as the flashmap driver recalculates the CRC to an even smaller area when it boots. SVN-Revision: 22396	2010-07-27 15:37:37 +00:00
Hauke Mehrtens	763e011e70	brcm47xx: now hopfully realy commit the right things from r22385 SVN-Revision: 22388	2010-07-25 16:10:51 +00:00
Hauke Mehrtens	d67c25f592	brcm47xx: add missing part from r22385 SVN-Revision: 22387	2010-07-25 16:07:40 +00:00
Hauke Mehrtens	163b24d092	brcm47xx: fill the whole sprom with data SVN-Revision: 22385	2010-07-24 23:25:06 +00:00
Hauke Mehrtens	ebeaea35fd	brcm47xx: fix for boardflags by xMff and checkpatch.pl fixes SVN-Revision: 22318	2010-07-20 19:41:17 +00:00
Hauke Mehrtens	c811398d00	brcm47xx: write boardflags correct into sprom SVN-Revision: 22298	2010-07-19 21:45:29 +00:00
Hauke Mehrtens	49edb3c342	brcm47xx: prepare brcm47xx patches for sending to mainline. SVN-Revision: 22296	2010-07-19 20:25:20 +00:00
Hauke Mehrtens	0799e77a8b	brcm47xx: remove kernel 2.6.33 SVN-Revision: 22295	2010-07-19 20:07:24 +00:00
Hauke Mehrtens	2d87b1c1ee	brcm47xx: activate swap again and run make oldconfig SVN-Revision: 22266	2010-07-17 20:01:46 +00:00
Daniel Dickinson	17ba48cd90	target (base-files): Fixed failsafe mode by adding back insmod diag SVN-Revision: 22186	2010-07-15 02:46:03 +00:00
Hauke Mehrtens	3310fdf6fa	brcm47xx: use kernel 2.6.34.1 as default kernel SVN-Revision: 22119	2010-07-10 22:40:45 +00:00
Felix Fietkau	9c8d55541a	brcm47xx: fix a small copy&paste error in the b44 fix for 2.6.34 and 2.6.35 SVN-Revision: 22116	2010-07-10 12:17:41 +00:00
Felix Fietkau	fbff44c98a	Get rid of the b44 'BUG! Timeout waiting for bit 80000000 of register 428 to clear.' spam. more and more users are getting confused by this, and consider it a regression in brcm47xx, because brcm-2.4 was not showing this message. It's not particularly interesting for debugging, most of the time it only happens because of an unconnected port. SVN-Revision: 22110	2010-07-10 00:48:37 +00:00
Markus Wigge	25602743d1	brcm47xx: added dual image support to flashmap driver some CFE versions (i.e. WRT54G3Gv2-VF) expect two separate firmware images which each consume half of the available flash space. these changes check for the TRX header version and set the partition size correctly. Tested on G3Gv2-VF and Asus WL-500GP SVN-Revision: 22019	2010-07-01 16:26:24 +00:00
Markus Wigge	114ce0bd4c	renamed wrt54g3gv2-vf images 'factory' and 'sysupgrade' did not make much sense. A discussion with jow convinced me that .trx results in a helpdesk disaster. So I decided to use '.bin' for normal bin-headers and '.noheader.bin' for the trx-v2 image. I fixed the wiki accordingly. SVN-Revision: 22013	2010-07-01 10:48:13 +00:00
Alexandros C. Couloumbis	0409c64e34	fix commit r21993 SVN-Revision: 21994	2010-06-30 19:35:12 +00:00
Felix Fietkau	812f026323	add back the base-files/image code from brcm-2.4 to brcm47xx SVN-Revision: 21945	2010-06-26 20:41:49 +00:00
Felix Fietkau	519b6a2f4c	remove brcm47xx symlinks to brcm-2.4 (unfortunately svn does not allow a proper type changing commit) SVN-Revision: 21944	2010-06-26 20:41:40 +00:00
Jo-Philipp Wich	5181a82334	change a typo in ath5k profile SVN-Revision: 21853	2010-06-20 13:46:24 +00:00
Jo-Philipp Wich	af1eb7ec46	deselect wpad-mini in wl profile instead of adding it to all other profiles, slightly change titles SVN-Revision: 21852	2010-06-20 13:44:19 +00:00
Jo-Philipp Wich	da6e39e592	add a profile using proprietary wl instead of b43 SVN-Revision: 21851	2010-06-20 13:32:40 +00:00
Felix Fietkau	efa4f94436	brcm47xx: add some exports to be used by the new wl driver SVN-Revision: 21793	2010-06-14 10:03:05 +00:00
Gabor Juhos	9bc1e548a1	generic: move more common options to generic configuration * CONFIG_ABX500_CORE * CONFIG_ATOMIC64_SELFTEST * CONFIG_BRIDGE_IGMP_SNOOPING * CONFIG_CAIF * CONFIG_CEPH_FS * CONFIG_CRYSTALHD * CONFIG_DEFAULT_SECURITY_SELINUX * CONFIG_DEFAULT_SECURITY_SMACK * CONFIG_DEFAULT_SECURITY_TOMOYO * CONFIG_DT3155 * CONFIG_IP_MROUTE_MULTIPLE_TABLES * CONFIG_L2TP * CONFIG_LOGFS * CONFIG_LPC_SCH * CONFIG_MFD_JANZ_CMODIO * CONFIG_MFD_RDC321X * CONFIG_N_GSM * CONFIG_RAMOOPS * CONFIG_SERIAL_ALTERA_JTAGUART * CONFIG_SERIAL_ALTERA_UART * CONFIG_SERIAL_TIMBERDALE * CONFIG_SM_FTL * CONFIG_SQUASHFS_XATTRS SVN-Revision: 21750	2010-06-10 10:45:51 +00:00
Gabor Juhos	4128c72275	generic: don't override CONFIG_DEBUG_FS SVN-Revision: 21749	2010-06-10 10:45:42 +00:00
Gabor Juhos	2f328ce488	generic: move some common symbols to generic configuration * CONFIG_MUTEX_SPIN_ON_OWNER * CONFIG_DEFAULT_HYDLA * CONFIG_DEFAULT_VENO SVN-Revision: 21748	2010-06-10 08:58:14 +00:00
Gabor Juhos	57c5fe2e7f	generic: remove trailing whitespaces from kernel configs SVN-Revision: 21747	2010-06-10 08:58:09 +00:00
Gabor Juhos	5cad9d5c73	generic: standardize CONFIG_INLINE_* symbols usage SVN-Revision: 21746	2010-06-10 08:09:41 +00:00
Alexandros C. Couloumbis	cfa9a1f6d6	brcm47xx: add kernel 2.6.35 preliminary support SVN-Revision: 21707	2010-06-08 16:58:06 +00:00
Nicolas Thill	e74e289fa8	update linux kernel to 2.6.32.14 SVN-Revision: 21583	2010-05-27 18:09:09 +00:00
Hauke Mehrtens	7800ac4e58	brcm47xx: refresh patches SVN-Revision: 21543	2010-05-23 13:17:56 +00:00
Hauke Mehrtens	b18a1d217b	kernel: update kernel to version 2.6.32.13 and 2.6.33.4 SVN-Revision: 21540	2010-05-23 13:16:51 +00:00
Lars-Peter Clausen	37a8f3522f	Move CONFIG_LZMA_{DE,}COMPRESS to generic config It is selected by CONFIG_JFFS2_LZMA which is set in the generic config. SVN-Revision: 21437	2010-05-12 23:04:18 +00:00
Hauke Mehrtens	c96049615c	brcm47xx: use tab instead of space SVN-Revision: 21430	2010-05-12 20:28:39 +00:00
Hauke Mehrtens	bb8d84ce4e	brcm47xx: ehci-ssb: some updates: * update pointers in struct hc_driver * make ssb_ehci_detach more look like the pci version * remove resume and suspend as they are never activated and not compiling * replace ssb_ehci_start with ehci_run as it only calls this method SVN-Revision: 21427	2010-05-12 18:28:41 +00:00
Felix Fietkau	0f7864456a	brcm47xx: adjust the brcm4710 cache workaround code so that it does not break bcm4716 (patch by Bernhard Loos) SVN-Revision: 21395	2010-05-07 11:48:15 +00:00
Felix Fietkau	3ea657a3e9	kernel: bring ssb in sync with upstream (as of current wireless-testing) SVN-Revision: 21269	2010-04-30 15:53:08 +00:00
Alexandros C. Couloumbis	09a1db3eea	brcm47xx: update config-2.6.33 options SVN-Revision: 21266	2010-04-30 11:10:04 +00:00
Alexandros C. Couloumbis	6a40947c31	brcm47xx: refresh 2.6.33 kernel patches SVN-Revision: 21265	2010-04-30 11:05:40 +00:00
Alexandros C. Couloumbis	fdac9ae836	sync to kernel 2.6.32.12 SVN-Revision: 21195	2010-04-27 14:30:08 +00:00
Alexandros C. Couloumbis	b7e21c6517	brcm47xx: add missing bits & bytes on r21119 SVN-Revision: 21145	2010-04-24 19:23:54 +00:00
Alexandros C. Couloumbis	d0883b82a4	brcm47xx: add sysfs attributes to ssb devices & new defines for registers and device ids (credits: Bernhard Loos) SVN-Revision: 21119	2010-04-24 06:54:17 +00:00
Alexandros C. Couloumbis	819114e3f2	brcm47xx: fix phy isolation bit on Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W and alike boards (closes #6789 ) SVN-Revision: 21108	2010-04-23 11:49:27 +00:00
Gabor Juhos	4be3c3e48c	kernel: refresh patches for 2.6.34-rc5 and update md5sum SVN-Revision: 21082	2010-04-22 07:13:21 +00:00
Alexandros C. Couloumbis	bf12a75a87	brcm47xx: fix r21042, nuke (boardnum == 42 section) SVN-Revision: 21047	2010-04-20 16:23:47 +00:00
Alexandros C. Couloumbis	bd97e88167	brcm47xx: fix ethernet link state (closes #7056 ) SVN-Revision: 21042	2010-04-20 15:03:22 +00:00
Hauke Mehrtens	fa432efa8e	brcm47xx: allow isdn on brcm47xx SVN-Revision: 21001	2010-04-18 19:32:18 +00:00
Hauke Mehrtens	79075b8d13	brcm47xx: refresh patches SVN-Revision: 20996	2010-04-18 18:22:50 +00:00
Hauke Mehrtens	03fd014069	brcm47xx: fix build of tg3 for kernel 2.6.34 SVN-Revision: 20994	2010-04-18 17:19:39 +00:00
Alexandros C. Couloumbis	e712ef386e	brcm47xx: fix ide drive assignment (closes #7061 ) SVN-Revision: 20924	2010-04-16 15:05:32 +00:00
Alexandros C. Couloumbis	598e0656c5	brcm47xx: add preliminary 2.6.34 support SVN-Revision: 20888	2010-04-15 20:50:50 +00:00
Hauke Mehrtens	0490c57e31	brcm47xx: remove support for older for kernel SVN-Revision: 20492	2010-03-26 19:53:30 +00:00
Gabor Juhos	e66a368bd1	kernel: update to 2.6.32.10 SVN-Revision: 20444	2010-03-26 10:45:25 +00:00
Markus Wigge	47f29ede08	added feature "pcmcia" SVN-Revision: 20268	2010-03-18 12:20:36 +00:00
Markus Wigge	a5ebd1656a	fix yenta_socket driver Disable some calls the WRT54G3G implementation does not like and enable interrupts to allow hotplugging. SVN-Revision: 20240	2010-03-16 10:41:26 +00:00
Markus Wigge	8bfc53f675	fix PCI resouce allocation for SSB PCI host bridge The defined offset is wrong and the fixup-code overrides it later on so that it never gets used for most PCI devices. Unfortunately the yenta-socket allocates its own resources and crashes because of the wrong mem_offset. It seems that the offset and fixup code came from 2.4 where resource allocation was handled differently. This patch removes the unneeded parts and thus enables the yenta_socket on the WRT54G3G platform. It was tested on Asus WL500G-Premium (v1 and v2), Linksys WRT54G3G, Netgear WGT634U Signed-off-by: Michael Buesch <mb@bu3sch.de> SVN-Revision: 20239	2010-03-16 10:39:37 +00:00
Nicolas Thill	e1863691d9	do not enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370]) SVN-Revision: 20136	2010-03-11 09:50:11 +00:00
Hauke Mehrtens	3f0dc5c30f	brcm47xx: fix commit r18413 "128MB ram problem" The patch commited in r18413 was wrong. This patch prevents prom_init_mem from scanning over 128MB ram. This is from #6765 and #3177 Refresh all patches SVN-Revision: 20072	2010-03-08 22:03:00 +00:00
Hauke Mehrtens	d29c671202	brcm47xx: add CONFIG_CMDLINE again Fix for r19955 this patch was suggested by tripolar SVN-Revision: 19967	2010-03-03 20:32:41 +00:00
Hauke Mehrtens	141d53ad07	brcm47xx: add support for kernel 2.6.33 Thanks to acoul and tripolar SVN-Revision: 19955	2010-03-02 21:16:18 +00:00
Florian Fainelli	23b5d2b743	explicitely enable shared interrupt 2 for any core that did not a dedicated IRQ Explicitely enable shared interrupt 2 for any core that didn't get a dedicated IRQ anymore (fallthrough case) and for EXTIF cores to make gpio interrupts work. Also remove a bogus comment. Signed-off-by: Jochen Friedrich <jochen@scram.de> SVN-Revision: 19895	2010-02-28 11:09:44 +00:00
Hauke Mehrtens	d503a25c83	remove unneeded patch SVN-Revision: 19891	2010-02-28 10:21:04 +00:00
Hauke Mehrtens	0c7b285613	kernel: update to kernel 2.6.32.9 SVN-Revision: 19890	2010-02-28 10:16:47 +00:00
Hauke Mehrtens	7524480b82	Fix build warnings SVN-Revision: 19782	2010-02-20 19:31:34 +00:00
Hauke Mehrtens	046c32e6bf	refresh patches SVN-Revision: 19781	2010-02-20 19:31:13 +00:00
Travis Kemen	9afc4a1109	fix mistake, thanks xMff SVN-Revision: 19620	2010-02-13 01:05:31 +00:00
Travis Kemen	2dc489505e	sync kernel config, closes #6675 SVN-Revision: 19619	2010-02-13 00:53:21 +00:00
Travis Kemen	f05d9d2e8e	update brcm47xx to .32, thanks tripolar SVN-Revision: 19592	2010-02-12 01:14:56 +00:00
Imre Kaloz	825b37cc56	clean up handling of some kernel symbols SVN-Revision: 19581	2010-02-11 09:33:16 +00:00
Imre Kaloz	0a52bc58f8	re-sort all target and subtarget config files SVN-Revision: 19580	2010-02-11 08:55:15 +00:00
Felix Fietkau	863e3c739a	replace the hostapd-mini preselection in profiles with wpad-mini SVN-Revision: 19503	2010-02-03 03:45:38 +00:00
Felix Fietkau	2aa0d20756	replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images SVN-Revision: 19293	2010-01-23 17:21:18 +00:00
Michael Büsch	c97341b761	bcm47xx: Add basic 2.6.32 support. SVN-Revision: 19062	2010-01-07 16:06:05 +00:00
Imre Kaloz	1fe38ff73b	switch ixp4xx and ubicom32 to 2.6.30, get rid of 2.6.28 files SVN-Revision: 18952	2009-12-27 21:28:02 +00:00
Florian Fainelli	a47b8566a1	update to 2.6.30, refresh patches SVN-Revision: 18635	2009-12-04 14:52:45 +00:00
Felix Fietkau	fa0396c530	kernel: move CONFIG_MIPS_FPU_EMU to generic kernel config SVN-Revision: 18603	2009-11-29 14:31:55 +00:00
Hauke Mehrtens	6384a68295	Remove patches already applied in generic and refresh patches. This fixes #6200 SVN-Revision: 18597	2009-11-29 12:09:42 +00:00
Jo-Philipp Wich	318140c209	add missing CONFIG_MIPS_FPU_EMU to kernel config SVN-Revision: 18477	2009-11-22 14:54:26 +00:00
Hauke Mehrtens	30f859403a	fix problem with 128MB ram. This patch is out of broadcoms official source code SVN-Revision: 18413	2009-11-13 20:32:47 +00:00
Imre Kaloz	6b280112f2	some more Kconfig symbol move.. SVN-Revision: 18371	2009-11-11 11:52:41 +00:00
Imre Kaloz	1d62d9a95c	another round of kernel config cleanups SVN-Revision: 18370	2009-11-11 11:42:24 +00:00
Imre Kaloz	ef42fb4c13	sort all target config files SVN-Revision: 18367	2009-11-11 09:27:13 +00:00
Travis Kemen	72c103416c	fix my typo SVN-Revision: 18219	2009-10-30 01:08:11 +00:00
Travis Kemen	a1021e8e64	add WRT350Nv1 target, thanks sn9 SVN-Revision: 18218	2009-10-30 01:05:37 +00:00
Florian Fainelli	d4b251bdb8	update to 2.6.30.9 SVN-Revision: 18126	2009-10-23 12:10:25 +00:00
Andy Boyett	c85a89348f	move IMAGE_CMDLINE_HACK default to generic from targets SVN-Revision: 17905	2009-10-05 17:05:34 +00:00
Gabor Juhos	054c54512f	kernel: upgrade to 2.6.30.8 and refresh patches SVN-Revision: 17804	2009-10-01 10:07:32 +00:00
Hauke Mehrtens	48d6cee53b	remove deprecated warning SVN-Revision: 17761	2009-09-27 13:52:14 +00:00
Hauke Mehrtens	99c3549ea3	Remove patches already included in mainline kernel. SVN-Revision: 17735	2009-09-26 11:51:26 +00:00
Hauke Mehrtens	8673372e20	add patches for kernel 2.6.31 This is completly untested. Only a compile tests with the default config was done! SVN-Revision: 17734	2009-09-26 11:48:48 +00:00
Hauke Mehrtens	6247141e78	refresh patches SVN-Revision: 17733	2009-09-26 11:42:43 +00:00
Felix Fietkau	7a74903bba	brcm47xx: switch to 2.6.30.7 SVN-Revision: 17732	2009-09-26 09:33:44 +00:00
Felix Fietkau	71595d7ce8	brcm47xx - add cache workarounds to 2.6.28 (merged from 2.6.30), fixes #4293 , should fix #2374 SVN-Revision: 17710	2009-09-24 21:20:44 +00:00
Gabor Juhos	47c0d7419f	kernel: get rid of the simple_prom_emulator, it is not really useful SVN-Revision: 17567	2009-09-10 18:30:20 +00:00
Gabor Juhos	d59f5b3a98	kernel: add generic image_cmdline hack to MIPS targets SVN-Revision: 17563	2009-09-10 18:30:01 +00:00
Michael Büsch	2b71a6167f	bcm47xx: Fix EHCI/OHCI dependencies SVN-Revision: 17536	2009-09-06 21:15:12 +00:00
Michael Büsch	daa3c84109	bcm47xx: Fix EHCI/OHCI dependencies SVN-Revision: 17535	2009-09-06 20:55:01 +00:00
Michael Büsch	caa8d2f9dc	Fix merge error SVN-Revision: 17534	2009-09-06 20:43:44 +00:00
Michael Büsch	1941a86b15	bcm47xx: Port usb fixes to .30 SVN-Revision: 17533	2009-09-06 20:25:11 +00:00
Michael Büsch	bf95da61ac	bcm47xx: Apply bcm5354 USB fix SVN-Revision: 17531	2009-09-06 19:49:07 +00:00
Michael Büsch	82f1314a35	bcm47xx: Clean up USB patches SVN-Revision: 17530	2009-09-06 19:31:14 +00:00
Hauke Mehrtens	e59c6a8af2	refresh patches SVN-Revision: 17268	2009-08-15 08:37:45 +00:00
Felix Fietkau	f9df014859	add the 2.6.30 port of the cache workaround patch from #4293 (thx, acoul) SVN-Revision: 16917	2009-07-19 11:44:54 +00:00
Imre Kaloz	e01651285f	rfkill config cleanup SVN-Revision: 16471	2009-06-15 07:13:00 +00:00
Hauke Mehrtens	af0d813825	refresh patches SVN-Revision: 16445	2009-06-14 09:45:59 +00:00
Hauke Mehrtens	74705fe7eb	Port to kernel 2.6.30. There is an error in the unlzma system in the kernel. A lzma compressed squashfs filesystem does not work for me. This should compile and works for me on my Asus WL-500GP, please test it on more systems. SVN-Revision: 16441	2009-06-13 21:20:53 +00:00
Florian Fainelli	b1a364acca	include ubsec_ssb in the WGT634U profile SVN-Revision: 16440	2009-06-13 20:38:24 +00:00
Florian Fainelli	9000ed3e5c	fix ssb irq setup, allows ubsec_ssb devices on Asus WL500GP and Netgear WGT634U to work, no side effects noticed on other devices SVN-Revision: 16416	2009-06-11 07:57:53 +00:00
Jo-Philipp Wich	73eee8e138	add patches to workaround dcache realted fuse problems (#5186 ) SVN-Revision: 16412	2009-06-11 02:10:41 +00:00
Florian Fainelli	03b7eda3c0	add watchdog driver (#5238 ) SVN-Revision: 16381	2009-06-08 14:15:25 +00:00
Nicolas Thill	b7ae5e7b7c	brcm47xx: make input support modular (closes: #5174 ) SVN-Revision: 16143	2009-05-28 15:54:18 +00:00
Felix Fietkau	5e8a99b2b8	brcm47xx: initialize mtd bankwidth to fix problems with DIR-320 and others (patch from #4729 ) SVN-Revision: 15959	2009-05-21 12:01:44 +00:00
Imre Kaloz	e965c02820	even more config file cleanup SVN-Revision: 15913	2009-05-18 13:21:25 +00:00
Imre Kaloz	91e866f383	config cleanups SVN-Revision: 15861	2009-05-15 10:40:04 +00:00
Imre Kaloz	a9c958c2de	make kernels use /etc/preinit by default SVN-Revision: 15840	2009-05-14 10:20:53 +00:00
Hauke Mehrtens	81ebf13b9e	Activate CONFIG_USB_EHCI_HCD_SSB and CONFIG_USB_OHCI_HCD_SSB only on brcm47xx. SVN-Revision: 15807	2009-05-12 22:02:19 +00:00
Imre Kaloz	e9b397805d	some more kernel config cleanup.. last for today :) SVN-Revision: 15606	2009-05-04 20:57:02 +00:00
Imre Kaloz	0f2b1d070a	more cleanup SVN-Revision: 15605	2009-05-04 20:31:47 +00:00
Imre Kaloz	a614251e6c	cleanup MTD option handling SVN-Revision: 15602	2009-05-04 19:13:43 +00:00
Imre Kaloz	38c5311047	move MFD stuff to the generic kernel configs SVN-Revision: 15587	2009-05-04 13:51:29 +00:00
Imre Kaloz	64fbade939	refresh patches SVN-Revision: 15581	2009-05-04 11:35:08 +00:00
Imre Kaloz	86a4a6edb9	upgrade to newest stable kernel versions SVN-Revision: 15575	2009-05-03 16:58:06 +00:00
Florian Fainelli	35fd7d6d20	use vmalloc instead of kmalloc when reserving space for the lzma initramfs (#3488 ) SVN-Revision: 15534	2009-05-01 09:23:31 +00:00
Felix Fietkau	4f88f8de81	brcm47xx: remove 2.6.25 support SVN-Revision: 15448	2009-04-27 15:47:46 +00:00
Jo-Philipp Wich	d607443fdb	add nvram to default packages SVN-Revision: 15438	2009-04-27 13:00:27 +00:00
Felix Fietkau	a0c097720d	brcm47xx: 2.6.28 was accidentally committed with the old (and conceptually broken) b44 phy fix. replace it with my cleaned up version from 2.6.25 (thx, netprince) SVN-Revision: 15351	2009-04-23 14:27:16 +00:00
Florian Fainelli	a9f97c3def	correctly set mapbase while registering the UART (#4622 ) SVN-Revision: 15255	2009-04-19 13:43:00 +00:00
Florian Fainelli	e88aa94e42	finally fix boot failures on buffalo devices, tested on WHR-HP-G54 and WRT54GS v1.1 with no side effects (#4061 ) SVN-Revision: 15232	2009-04-17 09:22:02 +00:00
Florian Fainelli	4bd65101ad	do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module (#4659 ) SVN-Revision: 15215	2009-04-12 12:54:38 +00:00
Felix Fietkau	908e5f64bf	b44: use netdev_alloc_skb SVN-Revision: 15159	2009-04-08 16:57:52 +00:00
Hauke Mehrtens	62595883fb	update to kernel version 2.6.28.9 SVN-Revision: 15017	2009-03-24 15:06:53 +00:00
Michael Büsch	7ddf197c26	bcm47xx: Fix compilation on non-PCI configs. SVN-Revision: 14919	2009-03-17 16:45:23 +00:00
Imre Kaloz	af65816d5d	update other 2.6.28.7 targets to 2.6.28.8, too SVN-Revision: 14917	2009-03-17 12:53:22 +00:00
Hauke Mehrtens	4c548fbaca	refresh patches and configuration SVN-Revision: 14722	2009-03-01 20:19:55 +00:00
Felix Fietkau	745ccfb97e	nuke some wgt634u specific crap that was introduced upstream SVN-Revision: 14619	2009-02-22 17:14:28 +00:00
Felix Fietkau	11014b5cea	disable all kernel config options that are set to =m SVN-Revision: 14611	2009-02-22 04:44:24 +00:00
Hauke Mehrtens	3f085cd501	update to 2.6.28.7 and 2.6.27.19 SVN-Revision: 14601	2009-02-21 18:53:05 +00:00
Markus Wigge	5585f5fe56	new upstream kernel 2.6.28.6 SVN-Revision: 14551	2009-02-18 17:37:54 +00:00
Michael Büsch	e996ce246c	Fix bcm47xx GPIO dirin/dirout API return codes. SVN-Revision: 14509	2009-02-14 20:22:31 +00:00
Markus Wigge	7b6340f016	changed default kernel to 2.6.28.5, it at least runs on Asus WL-500g Premium. The earlier version 2.6.28.4 is also running on WRT54G3G so I don't expect any trouble here. SVN-Revision: 14501	2009-02-13 17:37:57 +00:00
Michael Büsch	93e6c7a1db	bcm47xx: Implement the remaining parts of PMU init. SVN-Revision: 14394	2009-02-03 18:18:15 +00:00
Michael Büsch	629188123c	bcm47xx: Rename all SSB_PLLRES_ to SSB_PMURES_ SVN-Revision: 14374	2009-02-02 20:04:22 +00:00
Michael Büsch	5e48d8268e	bcm47xx: Implement 4312 and part of 4325 PLL init. SVN-Revision: 14373	2009-02-02 20:00:04 +00:00
Michael Büsch	9494e946a9	bcm47xx: Implement the remaining PMU resource inits. SVN-Revision: 14350	2009-02-01 20:20:49 +00:00
Michael Büsch	d070eb4c91	bcm47xx: Add support for the 5354 PMU. SVN-Revision: 14347	2009-02-01 18:55:36 +00:00

... 7 8 9 10 11 ...

941 Commits