Commit Graph

2503 Commits

Author SHA1 Message Date
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Gabor Juhos
57b7879a4e ramips: ramips_eth: use Kconfig definition to enable debug
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34332
2012-11-25 14:25:54 +00:00
Gabor Juhos
21d5df8700 ramips: add DIR-615 D userspace support
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.

An IRC user reported these changes allowed him to use wifi on his hardware.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34331
2012-11-25 14:25:27 +00:00
Gabor Juhos
dd092fd10c ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34270
2012-11-20 07:19:10 +00:00
Gabor Juhos
ff1e854511 kernel: update linux 3.6 to 3.6.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
John Crispin
dd8c625424 previous commit pushed 1 file too many ;)
SVN-Revision: 34179
2012-11-12 21:36:23 +00:00
John Crispin
ced0cf3a94 move ethernet hw init to init/uninit functions
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.

SVN-Revision: 34177
2012-11-12 21:35:01 +00:00
John Crispin
6090ddc896 adds fon20n profile
SVN-Revision: 34112
2012-11-07 20:26:31 +00:00
John Crispin
3991526989 ramips: use kernel 3.6.6
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

SVN-Revision: 34111
2012-11-07 20:26:21 +00:00
John Crispin
480892226d ramips: add HAVE_CLK to Kconfig on all ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34110
2012-11-07 20:26:04 +00:00
John Crispin
feb31be6af ramips: add linux-3.6 configuration for ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

SVN-Revision: 34109
2012-11-07 20:25:55 +00:00
John Crispin
ca1fcaed5b ramips: port patches to linux-3.6
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

SVN-Revision: 34108
2012-11-07 20:25:34 +00:00
Gabor Juhos
a0dd47bbed ramips: enable USB power on the DIR-645
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
2012-11-05 11:04:45 +00:00
Gabor Juhos
829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
2012-11-05 06:58:53 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
Gabor Juhos
db5eea6acd ramips: use correct key code for the RFKILL switch on the TEW-691GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33943
2012-10-26 18:53:44 +00:00
Gabor Juhos
b530d9d2b3 ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33864
2012-10-19 17:42:22 +00:00
Gabor Juhos
6ca2970e4b ramips: add profile and build image for the TEW-691GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33852
2012-10-18 07:23:13 +00:00
Gabor Juhos
21180e29f7 ramips: add user-space support for TEW-691GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33851
2012-10-18 07:23:12 +00:00
Gabor Juhos
25d53c4c28 ramips: rt3883: add initial support for the TRENDnet TEW-691GR board
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33850
2012-10-18 07:23:11 +00:00
Gabor Juhos
462a53c367 ramips: add profile and build image for the TEW-692GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33849
2012-10-18 07:23:10 +00:00
Gabor Juhos
d3c368c324 ramips: add user-space support for the TEW-692GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33847
2012-10-18 07:23:07 +00:00
Gabor Juhos
7f8b7207c9 ramips: rt3883: add initial support for TRENDnet TEW-692GR board
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33846
2012-10-18 07:23:06 +00:00
Gabor Juhos
bf9ae9432b ramips: add profile and build image for the DIR-645 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33845
2012-10-18 07:23:04 +00:00
Gabor Juhos
06edafd079 ramips: add user space support for the DIR-645
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33844
2012-10-18 07:23:03 +00:00
Gabor Juhos
d1a253a2fd ramips: rt3883: add inital support for the DIR-645 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33843
2012-10-18 07:23:02 +00:00
Gabor Juhos
e962c16a88 ramips: use get_magic_long in sysupgrade image check
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33842
2012-10-18 07:23:00 +00:00
Gabor Juhos
d832cd11f8 ramips: add image for ALL0256N-8M
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.

[juhosg: change suffix from '8m' to '8M']

Patch by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33614
2012-10-04 06:34:09 +00:00
Gabor Juhos
e3bcbeb427 ramips: add memory detection code for RT5350
SVN-Revision: 33571
2012-09-27 10:18:15 +00:00
Gabor Juhos
80d2da9f0f ramips: allow to use custom code for memory size detection
SVN-Revision: 33570
2012-09-27 10:18:14 +00:00
John Crispin
d8c04821c3 make uci-defaults switch detection work on rt5350
SVN-Revision: 33549
2012-09-25 14:47:18 +00:00
John Crispin
34d57ebd8b add ethernet support for rt5350
SVN-Revision: 33548
2012-09-25 14:47:08 +00:00
John Crispin
af0cd76937 make ramips ethernet use a register mapping table
SVN-Revision: 33547
2012-09-25 14:46:58 +00:00
John Crispin
394a560a9a unbreak port mapping detection
SVN-Revision: 33536
2012-09-25 09:51:48 +00:00
John Crispin
223db72385 D-Link DAP-1350; Avoid bricking esw config
This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.

D-Link DAP-1350 goes bricked with AA 12.09-beta.

This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.

There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.

Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33411
2012-09-15 09:28:28 +00:00
John Crispin
bf355f8ee9 ramips/rt3883: fix a typo in the ASUS profile
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33410
2012-09-15 09:20:50 +00:00
Gabor Juhos
0a42b02126 ramips/rt305x: add initial support for Rt5350 SoC
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33381
2012-09-12 19:03:12 +00:00
Gabor Juhos
d8b2fef763 ramips: Add missing andmask to ramips_esw register read for recv_good value.
Add missing andmask to ramips_esw register read for recv_good value.

Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33322
2012-09-05 20:08:43 +00:00
Gabor Juhos
04c6143ca9 ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable.
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.

Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.

Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.

Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.

I did some tests regarding maximum packet size and did not see any

difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33321
2012-09-05 20:08:42 +00:00
Gabor Juhos
6c7b776ae0 ramips: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33316
2012-09-05 19:22:48 +00:00
Gabor Juhos
b0da5b73b8 ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002
SVN-Revision: 33307
2012-08-29 10:37:51 +00:00
Gabor Juhos
54d8a55eed ramips: make built-in switch transparent for ALL0256N and ALL5002
This allows them to transparently communicate with an external VLAN switch.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33305
2012-08-29 10:37:47 +00:00
Gabor Juhos
bc4763a399 ramips: Power down phy on disabled switch ports
Power down phy on disabled switch ports.

Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.

[juhosg: fix checkpatch warning]

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33304
2012-08-29 10:37:45 +00:00
Gabor Juhos
1617f226a9 ramips: Add support for 8devices Carambola dev board.
Add support for 8devices Carambola dev board.

The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33303
2012-08-29 10:37:43 +00:00
Gabor Juhos
bb0785880a ramips: Rename POC registers
Rename POC registers.

The current code uses POC1-POC3.

The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2

So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33302
2012-08-29 10:37:41 +00:00
Gabor Juhos
f1b9d77912 ramips: Minor ramips_esw.c cleanup
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33301
2012-08-29 10:37:40 +00:00
Gabor Juhos
1f3400d3b4 ramips: Add switch setup to uci network defaults
Add switch setup to uci network defaults.

The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33300
2012-08-29 10:37:38 +00:00
Gabor Juhos
3b17f1deb8 ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c

This patch adds swconfig support for ramips_esw:

Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.

The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33299
2012-08-29 10:37:36 +00:00
Gabor Juhos
358c7e47f2 ramips: ramips_esw.c indentation cleanup
Minor indentation cleanup.

Prepare for the main swconfig patch by cleaning up indentation a bit.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33298
2012-08-29 10:37:35 +00:00
Gabor Juhos
cebaa557be ramips: fix board parameter for the NBG-419N (#12061)
SVN-Revision: 33229
2012-08-22 17:55:12 +00:00
Gabor Juhos
eb54a05e89 ramips: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33225
2012-08-22 12:36:35 +00:00
Gabor Juhos
d77418d67e ramips: add RSSI leds for uci-defaults for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33220
2012-08-22 09:46:30 +00:00
Gabor Juhos
67e6461ad7 ramips: add board alias for the ALL0239-3G
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.

The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.

I'm working on implementing fixtrx for uImage in the mtd package to solve this.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33206
2012-08-17 17:56:07 +00:00
Gabor Juhos
89606b61b1 ramips: add support for D-Link DIR-615 H1
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.

[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]

Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33205
2012-08-17 17:56:05 +00:00
Gabor Juhos
82759a1716 ramips: rename rt3352 usb platform devices
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33145
2012-08-12 12:48:31 +00:00
Gabor Juhos
1525620b0e ramips: watchdog: use maximum possible timeout by default
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.

As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33144
2012-08-12 12:48:28 +00:00
Gabor Juhos
615a619bc7 ramips: provide means to specify custom "image name" for uImages, use for DIR-620
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33143
2012-08-12 12:48:26 +00:00
Gabor Juhos
9365113040 ramips: add D-Link DIR-620 A1 support
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.

Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33142
2012-08-12 12:48:24 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk
SVN-Revision: 32864
2012-07-25 15:50:42 +00:00
John Crispin
5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
2012-07-24 20:38:55 +00:00
John Crispin
799d6deab0 D-Link DAP-1350 initial support
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
2012-07-24 20:38:43 +00:00
John Crispin
03be8d08ac initial LED configuration for Fonera 2.0n
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
2012-07-24 20:38:31 +00:00
John Crispin
2d2479a033 add ALL5002 userspace support
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
2012-07-24 20:38:14 +00:00
John Crispin
e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
2012-07-24 20:38:08 +00:00
John Crispin
a65eee9ac3 add image build for ALL5002
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
2012-07-24 20:38:03 +00:00
John Crispin
0a08a776fb add support for Allnet ALL5002 to kernel
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
2012-07-24 20:37:56 +00:00
John Crispin
6641024f50 uart_clk on Rt3352F is always 40MHz
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32812
2012-07-24 20:37:50 +00:00
Gabor Juhos
372945185d ramips: rt305x: add support for Edimax 3G-6200N
Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>

SVN-Revision: 32682
2012-07-12 13:29:46 +00:00
Vasilis Tsiligiannis
eee358338c ramips: mac address detection for Fonera 2.0n
Detect and apply MAC address of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>

SVN-Revision: 32490
2012-06-23 13:58:29 +00:00
Gabor Juhos
833b4af816 ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

SVN-Revision: 32450
2012-06-19 09:52:15 +00:00
John Crispin
a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Gabor Juhos
ffbb4f88a9 ramips: use the generic uci-default functions for initial LED setup
SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
Gabor Juhos
c71838faa1 ramips: WAN LED for D-Link DIR-300-B1
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
Gabor Juhos
1c552ba8e5 ramips: rt3883: add device registration code for the SPI controller
SVN-Revision: 31922
2012-05-27 17:10:00 +00:00
Gabor Juhos
9c241983fc ramips: allow to use the SPI driver on RT3662/RT3883
SVN-Revision: 31921
2012-05-27 17:09:58 +00:00
Gabor Juhos
78a750dcce ramips: rt3883: fix GPIO reservation for the SPI pins
SVN-Revision: 31920
2012-05-27 17:09:56 +00:00
Gabor Juhos
0622fdd82c ramips: rt305x: remove superfluous controller_data assignment
SVN-Revision: 31919
2012-05-27 17:09:52 +00:00
Gabor Juhos
7f5bec0642 ramips: make rt2x00 firmware extraction quiet
SVN-Revision: 31918
2012-05-27 17:09:50 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos
e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
Gabor Juhos
1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Gabor Juhos
b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
Gabor Juhos
90e99b9fe8 ramips: Make serial console for DIR-300-B1 work again
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Gabor Juhos
8e06682fb7 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
Jonas Gorski
8fd383ae2e kernel: update linux 3.3 to 3.3.3
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
Gabor Juhos
1ab80c7817 ramips: rt305x: add support for the UR-336UN board
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451
2012-04-23 16:56:06 +00:00
Gabor Juhos
3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
Gabor Juhos
5024ffb976 ramips: nuke 3.2 suport
SVN-Revision: 31405
2012-04-21 12:30:53 +00:00
Gabor Juhos
6c8ca78067 ramips: switch to 3.3.2
SVN-Revision: 31404
2012-04-21 12:30:51 +00:00
Gabor Juhos
5c325b0057 ramips: add support for 3.3
SVN-Revision: 31403
2012-04-21 12:30:50 +00:00
Gabor Juhos
7f902c962b ramips: rt305x: add OHCI/EHCI registration code for RT3352
SVN-Revision: 31402
2012-04-21 12:30:48 +00:00
Gabor Juhos
1645928135 ramips: rt305x: fix CPU clock detection on RT3352
SVN-Revision: 31401
2012-04-21 12:30:47 +00:00
Gabor Juhos
fb69e28eaf ramips: rt305x: use different memory size setup for RT3352
SVN-Revision: 31400
2012-04-21 12:30:45 +00:00
Gabor Juhos
818aeba960 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
SVN-Revision: 31399
2012-04-21 12:30:44 +00:00
Gabor Juhos
6b677e1d22 ramips: add swconfig to the default package list
SVN-Revision: 31398
2012-04-21 12:30:43 +00:00
Gabor Juhos
ced031a0b2 ramips: build initramfs image for the Fonera 2.0N
SVN-Revision: 31397
2012-04-21 12:30:42 +00:00
Gabor Juhos
fc88a363c0 ramips: rt305x: add initial support for Tenda W306R V2.0
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
Gabor Juhos
88b5827c52 ramips: remove hardcoded console parameter from kernel configs
SVN-Revision: 31395
2012-04-21 12:30:30 +00:00
Jonas Gorski
a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
Jonas Gorski
d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
Jo-Philipp Wich
e9c4d3d1f2 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
SVN-Revision: 31144
2012-03-29 16:03:04 +00:00
Gabor Juhos
d495277d9f ramips: rt305x: build image for the DIR-615 rev D boards
Patch from #10105.

SVN-Revision: 31101
2012-03-27 19:29:59 +00:00
Gabor Juhos
e4e24c5512 ramips: rt305x: add add support for the Asus WL-330N board
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31100
2012-03-27 19:29:57 +00:00
Gabor Juhos
c1dc6df8bd kernel: update linux 3.2 to 3.2.12
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
Gabor Juhos
18f7081e17 ramips: rt305x: add profile for the AZtech HW-5503G board
Patch from #11085.

SVN-Revision: 30907
2012-03-12 17:29:06 +00:00
Gabor Juhos
0f77d0b2ba ramips: add RT3350 detection
SVN-Revision: 30900
2012-03-12 16:12:13 +00:00
Gabor Juhos
05d3f559f5 ramips: rt305x: rewrite SoC detection
SVN-Revision: 30890
2012-03-11 19:05:59 +00:00
Gabor Juhos
8cf8ee8f9d ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*
SVN-Revision: 30889
2012-03-11 19:05:57 +00:00
Gabor Juhos
acb4ad86e5 ramips: replace RALINK_SOC_* macros with global variables
SVN-Revision: 30888
2012-03-11 19:05:56 +00:00
Gabor Juhos
8cff770eb3 ramips: introduce ramips_soc_prom_init and move SoC detection into that
SVN-Revision: 30887
2012-03-11 19:05:53 +00:00
Gabor Juhos
6c51c47962 ramips: build initramfs image for DIR-{3,6}00 boards
SVN-Revision: 30882
2012-03-11 16:39:31 +00:00
Gabor Juhos
4e15457e0e ramips: allow to use DSP ASE on RT3xxx
SVN-Revision: 30879
2012-03-11 16:39:26 +00:00
Gabor Juhos
0e486d2fd2 ramips: add support for unbranded XDX-RN502J board
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:

http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197

http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html

some reports also state the Aceex 22Y uses the same board.

more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878

[juhosg: fix checkpatch warnings, use the GENERIC_4M template]

Signed-off-by: bruno schwander <bruno@tinkerbox.org>

SVN-Revision: 30809
2012-03-04 16:09:13 +00:00
Gabor Juhos
44c8b396f9 ramips: board support for Asus RT-N10+
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]

Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>

SVN-Revision: 30808
2012-03-04 16:09:11 +00:00
Gabor Juhos
9698a499b6 kernel: update linux 3.2 to 3.2.9
SVN-Revision: 30767
2012-03-01 19:49:02 +00:00
Gabor Juhos
72599f0c61 ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop
SVN-Revision: 30733
2012-02-26 10:54:13 +00:00
Gabor Juhos
100f76a010 ramips: raeth: add rx_info structure
This helps to reduce code size on RX path:

add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12)
function                                     old     new   delta
ramips_eth_open                             1104    1144     +40
ramips_ring_free                             212     232     +20
ramips_eth_stop                              400     408      +8
ramips_eth_rx_hw                             648     592     -56

SVN-Revision: 30732
2012-02-26 10:54:12 +00:00
Gabor Juhos
32e7b1c7d9 ramips: raeth: add tx_info structure
This helps to reduce code size on TX path:

add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36)
function                                     old     new   delta
ramips_eth_open                             1048    1104     +56
ramips_eth_tx_housekeeping                   156     148      -8
ramips_ring_free                             224     212     -12
ramips_eth_stop                              420     400     -20
ramips_eth_hard_start_xmit                   480     428     -52

SVN-Revision: 30731
2012-02-26 10:54:10 +00:00
Gabor Juhos
30143b715c ramips: raeth: don't process disabled interrupts
Also rename the 'fe_int' variable.

SVN-Revision: 30713
2012-02-25 11:59:19 +00:00
Gabor Juhos
6990f66861 ramips: fix FONERA20N image generation
SVN-Revision: 30710
2012-02-24 16:18:46 +00:00
Gabor Juhos
9afeeae65e ramips: image: increase minimum kernel partition size to 896k
SVN-Revision: 30706
2012-02-23 19:58:16 +00:00
Gabor Juhos
7089b5213e ramips: image: cleanup and sort templates/profiles
SVN-Revision: 30705
2012-02-23 19:58:15 +00:00
Gabor Juhos
c8718a220b ramips: image: use GENERIC_4M template for the ALL0256N board
SVN-Revision: 30704
2012-02-23 19:58:14 +00:00
Gabor Juhos
507c7d30f5 ramips: image: introduce mkmtd/{,phys,spi} helpers
SVN-Revision: 30703
2012-02-23 19:58:12 +00:00
Gabor Juhos
5f63ea18aa ramips: image: pass mtdlayout variables by value
SVN-Revision: 30702
2012-02-23 19:58:11 +00:00
Gabor Juhos
49e53c06b9 ramips: image: merge F5D8235V{1,2} templates
SVN-Revision: 30701
2012-02-23 19:58:10 +00:00
Gabor Juhos
00e7277a4c ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards
SVN-Revision: 30700
2012-02-23 19:58:07 +00:00
Gabor Juhos
554010d55b ramips: image: introduce mkcmdline helper
SVN-Revision: 30699
2012-02-23 19:58:06 +00:00
Gabor Juhos
32c6d63acf ramips: image: use the GENERIC_4M template for the V11ST-FE board
SVN-Revision: 30698
2012-02-23 19:58:04 +00:00
Gabor Juhos
ab65053cf0 ramips: image: simplify Makefile a bit
SVN-Revision: 30697
2012-02-23 19:58:03 +00:00
Gabor Juhos
9017fce3a2 ramips: image: add MkImageLzma wrapper
SVN-Revision: 30696
2012-02-23 19:58:02 +00:00
Gabor Juhos
c9d8f471fc ramips: image: allow to build board specific initramfs images
SVN-Revision: 30695
2012-02-23 19:58:01 +00:00
Gabor Juhos
c0974b46a5 ramips: merge identical switch configuration entries
SVN-Revision: 30688
2012-02-22 19:46:19 +00:00
Gabor Juhos
a9101a144c ramips: use unified switch identifiers in uci-defaults/network
SVN-Revision: 30687
2012-02-22 19:46:17 +00:00
Gabor Juhos
b6522f372f ramips: fix VLAN config of the RT-N15
SVN-Revision: 30686
2012-02-22 19:46:15 +00:00
Gabor Juhos
a18a821733 ramips: raeth: show interrupt statistics in debugfs
SVN-Revision: 30681
2012-02-22 13:06:44 +00:00
Gabor Juhos
214216c04d ramips: raeth: add debugfs support
SVN-Revision: 30680
2012-02-22 13:06:42 +00:00
Gabor Juhos
c1e4d709fa ramips: raeth: rename main source file
SVN-Revision: 30679
2012-02-22 13:06:41 +00:00
Gabor Juhos
5e6bc97d0c ramips: raeth: add missing Kconfig and Makefile
SVN-Revision: 30671
2012-02-21 09:44:30 +00:00
Gabor Juhos
3ba0f4e1ca ramips: move the ethernet driver into a separate directory
Also clean up the Kconfig symbols.

SVN-Revision: 30670
2012-02-21 09:26:43 +00:00
Gabor Juhos
a6d904b1d6 ramips: rename the spi driver
SVN-Revision: 30669
2012-02-21 09:26:41 +00:00
Gabor Juhos
dd001a4b0f ramips: rt3883: make rt3883_nand_data visible
SVN-Revision: 30655
2012-02-19 19:40:37 +00:00
Gabor Juhos
62f213eab9 ramips: merge 3.2 fixes
SVN-Revision: 30652
2012-02-19 17:52:23 +00:00
Gabor Juhos
18fdaee00b ramips: nuke 2.6.39 support
SVN-Revision: 30651
2012-02-19 17:52:20 +00:00
Gabor Juhos
e2ea72515f ramips: rt305x: nuke built-in MTD partition maps
SVN-Revision: 30650
2012-02-19 17:52:15 +00:00
Gabor Juhos
de6405c898 ramips: rt288x: nuke built-in MTD partition maps
SVN-Revision: 30649
2012-02-19 17:52:11 +00:00
Gabor Juhos
e7f59b9326 ramips: build sysupgrade image for the V11ST-FE board
SVN-Revision: 30648
2012-02-19 17:52:08 +00:00
Gabor Juhos
3489515a7e ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]

Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>

SVN-Revision: 30645
2012-02-19 16:44:49 +00:00
Gabor Juhos
990ed96a2a ralink: rt3883: disable the 2GHz band on the RT-N56U
SVN-Revision: 30632
2012-02-18 17:36:21 +00:00
Gabor Juhos
5710530c41 ramips: rt3883: make rt3883_wlan_data visible
SVN-Revision: 30631
2012-02-18 17:36:16 +00:00
Gabor Juhos
e17a3ffbbd ramips: extract eeprom for the built-in wlan module on the RT-N56U
SVN-Revision: 30604
2012-02-16 20:06:22 +00:00
Gabor Juhos
dabca24361 ramips: rt3883: change eeprom file name
SVN-Revision: 30603
2012-02-16 20:06:21 +00:00
Gabor Juhos
00d963999d ramips: select HW_HAS_PCI on per-board basis
SVN-Revision: 30576
2012-02-16 08:17:54 +00:00
Gabor Juhos
fc967295ec ramips: rt3883: remove a stray character from rt3883.h
SVN-Revision: 30575
2012-02-16 08:17:53 +00:00
Gabor Juhos
b4af07d5c0 ramips: rt288x: don't register the PCI controller on each board
SVN-Revision: 30574
2012-02-16 08:17:52 +00:00
Gabor Juhos
f8a56dc8df ramips: raeth: separate ring allocation and setup
SVN-Revision: 30573
2012-02-16 08:17:50 +00:00
Gabor Juhos
49fc54be3d ramips: rt288x: fix PCI resource conflict
SVN-Revision: 30563
2012-02-15 21:19:02 +00:00
Florian Fainelli
37f8c19028 correct PCI IO/Mem resource swapping
SVN-Revision: 30562
2012-02-15 21:13:21 +00:00
Florian Fainelli
3ceebbba14 add Ralink V11ST-FE board support
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

SVN-Revision: 30561
2012-02-15 21:13:11 +00:00
Gabor Juhos
8b8d9a8336 ramips: raeth: add a helper function for skb allocation
SVN-Revision: 30555
2012-02-15 18:33:42 +00:00
Gabor Juhos
e57546de83 ramips: raeth: use netdev_alloc_skb
SVN-Revision: 30554
2012-02-15 18:33:41 +00:00
Gabor Juhos
064855314b ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures
This helps GCC to generare more efficient code.

SVN-Revision: 30553
2012-02-15 18:33:40 +00:00
Gabor Juhos
8c95385d78 ramips: raeth: use 're' instead of 'priv' everywhere
SVN-Revision: 30552
2012-02-15 18:33:38 +00:00
Gabor Juhos
b3b79365f3 ramips: raeth: force link down in ramips_phy_stop
SVN-Revision: 30550
2012-02-15 13:47:52 +00:00
Gabor Juhos
3e7b461431 ramips: raeth: serialize ramips_link_adjust calls
SVN-Revision: 30549
2012-02-15 13:47:50 +00:00
Gabor Juhos
dcb13d4098 ramips: raeth: add PHYLIB support
SVN-Revision: 30547
2012-02-15 06:47:12 +00:00
Gabor Juhos
02a01a16c7 ramips: extract eeprom for the PCIe wlan module on the RT-N56U
SVN-Revision: 30529
2012-02-14 17:32:45 +00:00
Gabor Juhos
43d1a2c3ab ramips: rt3883: enable PCI on the RT-N56U board
SVN-Revision: 30528
2012-02-14 17:32:44 +00:00
Gabor Juhos
784be92e39 ramips: rt3883: add PCI support
SVN-Revision: 30527
2012-02-14 17:32:42 +00:00
Gabor Juhos
10f00dc48b ramips: rt3883: sync 2.6.39 config
SVN-Revision: 30526
2012-02-14 17:32:41 +00:00
Gabor Juhos
ed79921fe5 ramips: use SoC specific irq.h
SVN-Revision: 30525
2012-02-14 17:32:40 +00:00
Gabor Juhos
8d5dfa75e6 ramips: rt3883: update package list in the default profile
SVN-Revision: 30499
2012-02-13 15:18:05 +00:00
Gabor Juhos
99c019fb0d ramips: add preliminary support for the Asus RT-N56U board
SVN-Revision: 30498
2012-02-13 15:18:04 +00:00
Gabor Juhos
97e641a0e6 ramips: raeth: enable MDIO code for RT3883
SVN-Revision: 30497
2012-02-13 15:18:03 +00:00
Gabor Juhos
e532fa5fd4 ramips: add preliminary support for the RT3662/RT3883 SoCs
SVN-Revision: 30495
2012-02-13 15:17:59 +00:00
Gabor Juhos
22ec8b4839 ramips: use GENERIC_{4,8}M image template for WR5123GN
SVN-Revision: 30483
2012-02-12 18:04:47 +00:00
Gabor Juhos
b7f129e19b ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
SVN-Revision: 30482
2012-02-12 18:04:46 +00:00
Gabor Juhos
a287c60a61 ramips: add initial support for 3.2
SVN-Revision: 30476
2012-02-12 12:52:14 +00:00
Gabor Juhos
388013b0ce ramips: include 'linux/module.h' in the ramips_spi driver
SVN-Revision: 30475
2012-02-12 12:52:13 +00:00
Gabor Juhos
faae4235c4 ramips: rt288x: remove per-board physmap_flash_data instances
SVN-Revision: 30474
2012-02-12 12:52:12 +00:00
Gabor Juhos
3502e2b93f ramips: rt305x: remove per-board physmap_flash_data instances
SVN-Revision: 30473
2012-02-12 12:52:10 +00:00
Gabor Juhos
3a11dcdaa8 ramips: load gpio-polled keys module
SVN-Revision: 30463
2012-02-11 20:37:34 +00:00
Gabor Juhos
323ece9474 ramips: remove yet another CONFIG_MTD_PARTITION ifdef
SVN-Revision: 30462
2012-02-11 19:37:11 +00:00
Gabor Juhos
32b9e8c750 ramips: use gpio-keys-polled instead of gpio-buttons
SVN-Revision: 30461
2012-02-11 19:37:06 +00:00
Gabor Juhos
80b40497de ramips: add MIPS platform file
SVN-Revision: 30459
2012-02-11 18:16:11 +00:00
Gabor Juhos
4e1b870f3e ramips: add MDIO bus support for RT288X
SVN-Revision: 30455
2012-02-11 16:49:56 +00:00
Gabor Juhos
34a9ccf544 ramips: fix Belkin F5D8235-v2 VLAN setup
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30452
2012-02-11 15:31:18 +00:00
Gabor Juhos
8916c02b47 ramips: raeth: make debugging messages configurable
SVN-Revision: 30450
2012-02-11 15:12:10 +00:00
Gabor Juhos
aac3ad4c0e ramips: raeth: use device pointer in DMA API calls
SVN-Revision: 30449
2012-02-11 15:12:08 +00:00
Gabor Juhos
1fd8724e94 ramips: raeth: add netdev pointer to private structure
SVN-Revision: 30448
2012-02-11 15:12:06 +00:00
Gabor Juhos
c6fa11d00f ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit
SVN-Revision: 30447
2012-02-11 15:12:05 +00:00
Gabor Juhos
2d055f130e ramips: raeth: unmap rx DMA address in ramips_cleanup_dma
SVN-Revision: 30446
2012-02-11 15:12:04 +00:00
Gabor Juhos
7bd7ddcf4e ramips: raeth: add rx_dma array to store the DMA address of the rx packets
SVN-Revision: 30445
2012-02-11 15:12:02 +00:00
Gabor Juhos
647af823d9 ramips: raeth: use dma_addr_t for the descriptors
SVN-Revision: 30444
2012-02-11 15:12:01 +00:00
Gabor Juhos
df5892d1f1 ramips: raeth: unmap DMA memory when a packet is received
SVN-Revision: 30443
2012-02-11 15:11:56 +00:00
Gabor Juhos
617954ca5d ramips: raeth: add a temporary pktlen variable
SVN-Revision: 30442
2012-02-11 15:11:55 +00:00
Gabor Juhos
d1d492eaf9 ramips: raeth: protect macro parameters
SVN-Revision: 30441
2012-02-11 15:11:50 +00:00
Gabor Juhos
8250692359 ramips: raeth: indicate dropped packets in stats
SVN-Revision: 30440
2012-02-11 15:11:49 +00:00
Gabor Juhos
c67adbbddb ramips: raeth: use the NUM_TX_DESC for the tx_skb array
SVN-Revision: 30439
2012-02-11 15:11:47 +00:00
Gabor Juhos
a2c8789578 ramips: use uncached address in detect_mem_size
SVN-Revision: 30438
2012-02-11 15:11:45 +00:00
Gabor Juhos
ba4c9b3a8f ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files
SVN-Revision: 30437
2012-02-11 15:11:43 +00:00
Gabor Juhos
f2dd67dc09 ramips: rt288x: remove CONFIG_MTD_PARTITION ifdefery from machine files
SVN-Revision: 30436
2012-02-11 15:11:41 +00:00
Gabor Juhos
d6b9f88743 ramips: refresh patches
SVN-Revision: 30435
2012-02-11 15:11:40 +00:00
Gabor Juhos
9cde29f1a7 ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN
This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19.

This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210

It's also worth noting that this board has a GPIO line to control the
power to the USB port.

[juhosg:
 - fix checkpatch warnings,
 - reorder Kconfig entry,
 - merge the sysupgrade patch,
 - add GPL header]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 30434
2012-02-11 15:11:36 +00:00
Gabor Juhos
59b474732c ramips: rt305x: merge duplicated mac address setup
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30433
2012-02-11 15:11:34 +00:00
Gabor Juhos
7298ef2456 ramips: rt305x: add profile for the Belkin f5d8235v2
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30432
2012-02-11 15:11:32 +00:00
Gabor Juhos
0430194cc3 ramips: fix compiler warning in prom.c
SVN-Revision: 30424
2012-02-10 17:38:46 +00:00
Gabor Juhos
44ed690cb3 ramips: change vlan_config for the ALFA W502U board
This change moves the WAN port into a separate VLAN.

SVN-Revision: 29969
2012-01-31 18:34:10 +00:00
Gabor Juhos
b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
2012-01-26 10:44:23 +00:00
Gabor Juhos
02e77c6ae1 ramips: generate sysupgrade image for the ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29884
2012-01-24 11:48:48 +00:00
Gabor Juhos
944c8aacdb ramips: add user-space support for ALL0256N
This adds uci-defaults and sysupgrade support for the ALL0256N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29883
2012-01-24 11:48:47 +00:00
Gabor Juhos
1932a7205c ramips: add kernel support for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29882
2012-01-24 11:48:45 +00:00
Gabor Juhos
9cf1d4e06e ramips: scripts updates
In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29871
2012-01-23 10:23:32 +00:00
Gabor Juhos
809fe38e41 ramips fix f5d8235-v1 diag LED support
SVN-Revision: 29857
2012-01-22 18:11:39 +00:00
Gabor Juhos
e9d8deaaed ramips: add sysled and sysupgrade to wr512-3gn
Patch from #10035.

SVN-Revision: 29847
2012-01-22 13:43:23 +00:00
Gabor Juhos
557cf076b4 ramips: sysupgrade for ESR-9753
This patch add sysupgrade for Engenius ESR-9753

Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29824
2012-01-20 10:49:26 +00:00
John Crispin
a2708d11e8 ramips: Rework ramips_eth to not require irqsave locking anymore
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.

This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 29762
2012-01-17 11:23:11 +00:00
Gabor Juhos
244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
2011-12-28 08:43:43 +00:00
Gabor Juhos
f50b02b559 ramips: rt288x: change base address and window size of flash bank 0
SVN-Revision: 29616
2011-12-28 08:43:36 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
Gabor Juhos
723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
SVN-Revision: 29612
2011-12-27 16:56:30 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
Gabor Juhos
03bce34384 ramips: define firmware partition for Omnima MiniEMBWiFi
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

SVN-Revision: 29602
2011-12-23 14:27:05 +00:00
Gabor Juhos
0c38d36488 ramips: add support for Omnima MiniEMBWiFi board
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
2011-12-14 20:51:26 +00:00
Gabor Juhos
43bd4c6ad1 ramips: fix mac addresses on the DIR-300/600 boards
SVN-Revision: 29471
2011-12-06 20:06:08 +00:00
Gabor Juhos
5ef6ec4a31 ramips: set mac addresses for the NBG-419N
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>

SVN-Revision: 29454
2011-12-05 17:27:07 +00:00
Gabor Juhos
750d560767 ramips: set preinit interface mac on the hw550-3g board
Based on a patch by Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29453
2011-12-05 17:27:06 +00:00
Gabor Juhos
b5d7b359b2 ramips: use ramips_get_mac_* functions in the preinit script
SVN-Revision: 29452
2011-12-05 17:27:04 +00:00
Gabor Juhos
4d5b940e66 ramips: move ramips_get_mac_* functions to lib/ramips.sh
SVN-Revision: 29451
2011-12-05 17:27:03 +00:00
Gabor Juhos
cc853acb3a ramips: add ramips_ prefix to get_mac_{binary,nvram} functions
SVN-Revision: 29450
2011-12-05 17:27:02 +00:00
Gabor Juhos
b1137d48a4 ramips: fix network configuration setup
SVN-Revision: 29448
2011-12-05 16:54:48 +00:00
Gabor Juhos
56c9b50006 ramips: fix argus board rootfs size
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29422
2011-12-04 15:24:57 +00:00
Gabor Juhos
3fccc3b376 ramips: enable sysupgrade on the RT-N15 board
SVN-Revision: 29393
2011-12-01 22:48:58 +00:00
Gabor Juhos
4b2d1c3ad3 ramips: wrap long line in platform upgrade script
SVN-Revision: 29392
2011-12-01 22:48:57 +00:00
Gabor Juhos
d622263588 ramips: add profile for the Asus RT-N15
This uses previously submitted rtl8366 kernel packages.

[juhosg: The kmod-gpio-dev package has been removed from the package list.]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29391
2011-12-01 22:48:55 +00:00
Gabor Juhos
3a9e02fa41 ramips: setup default network configuration for RT-N15
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29390
2011-12-01 22:48:54 +00:00
Gabor Juhos
fc61c107f0 ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile
It is needed by the RT-N15 board.

SVN-Revision: 29389
2011-12-01 22:48:53 +00:00
Gabor Juhos
80221fcd2a ramips: remove default network configuration, and generate that from uci-defaults
SVN-Revision: 29387
2011-12-01 22:48:51 +00:00
Gabor Juhos
4f6c58adac ramips: use /lib/functions/uci-defaults.sh
SVN-Revision: 29386
2011-12-01 22:48:48 +00:00
Gabor Juhos
569d8de6d6 ramips: simplify uci-defaults/network script
SVN-Revision: 29383
2011-12-01 22:48:45 +00:00
Gabor Juhos
66c9a351dd ramips: setup mac and network interfaces from separate functions
SVN-Revision: 29382
2011-12-01 22:48:43 +00:00
Gabor Juhos
62d18e9f9a ramips: fix Asus RT-N15 board support
Fix Asus RT-N15 flash partitions and make an image.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29381
2011-12-01 22:48:42 +00:00
Gabor Juhos
2dd79d55c7 ramips: Sparklan wcr-150gn board fixes
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29380
2011-12-01 22:48:41 +00:00
Gabor Juhos
7c678e7511 ramips: fix package name of kmod-input-gpio-buttons
Based on a patch from Omnima Limited.

SVN-Revision: 29379
2011-12-01 22:48:39 +00:00
Gabor Juhos
2ed38b24a8 ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29378
2011-12-01 22:48:38 +00:00
Gabor Juhos
295e04084c ramips: setup bc2 mac addresses from the generic network script
SVN-Revision: 29377
2011-12-01 22:48:37 +00:00
Gabor Juhos
02f95d4fb3 ramips: combine network setup for all boards in one file
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 29376
2011-12-01 22:48:35 +00:00
Vasilis Tsiligiannis
17ccd4aec4 rt305x: Create factory image for Fonera 2.0n
SVN-Revision: 28689
2011-10-31 09:23:44 +00:00
Gabor Juhos
ee8077f0fe ramips: Support for NexAira BC2
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
Gabor Juhos
18452a753b ramips: fix switch-port assignment for HW550-3G
WAN is on swtich port 0 for Aztech HW550-3G.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28570
2011-10-24 21:49:32 +00:00
Gabor Juhos
68a01c0180 ramips: combine led setup for all boards in one file
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
Gabor Juhos
72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
Gabor Juhos
4b96d3af2a ramips: rt305x: remove unused defines from mach-nw718.c
SVN-Revision: 28077
2011-08-22 20:41:48 +00:00
Gabor Juhos
462ca22e9c ramips: sort Makefile entries
SVN-Revision: 28076
2011-08-22 20:41:47 +00:00
Gabor Juhos
d50494f3bb ramips: sort RAMIPS_MACH_* defines
SVN-Revision: 28075
2011-08-22 20:41:45 +00:00
Gabor Juhos
90686691ce ramips: fix wireless firmware extraction for wr512-3gn
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28073
2011-08-22 18:08:45 +00:00
Gabor Juhos
f0049824b9 ramips: remove 'default [yn]' keywords from machine Kconfig entries
SVN-Revision: 28054
2011-08-19 15:55:12 +00:00
Gabor Juhos
6720025497 ramips: rt305x: fix wr512n image generation
SVN-Revision: 28053
2011-08-19 15:55:11 +00:00
Gabor Juhos
9085b05d9e ramips: rt305x: support for wr512-3gn-like routers
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28052
2011-08-19 15:55:10 +00:00
Gabor Juhos
46b101ad0a ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28051
2011-08-19 15:55:08 +00:00
Gabor Juhos
05209860da ramips: fix wireless on Belkin F5D8235 v2
Fix wireless firmware extract from flash for Belkin F5D8235 v2.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28050
2011-08-19 15:55:07 +00:00
Gabor Juhos
f8ab604eb6 ramips: fix typo in default packages
Fix fivebytepypo - there is no such kernel module wpad-mini :)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28049
2011-08-19 15:55:05 +00:00
Hauke Mehrtens
09b1073f9b kernel: update kernel to version 2.6.39.4
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
Gabor Juhos
ace8ce0845 ramips: use maccalc instead of hexdump + sed
SVN-Revision: 28007
2011-08-15 19:00:23 +00:00
Gabor Juhos
bfc47ffead ramips: rt305x: fix mac addresses on the Netcore NW718 board
SVN-Revision: 28006
2011-08-15 18:55:53 +00:00
Gabor Juhos
17c041cd0b ramips: add maccalc to the default package list
SVN-Revision: 28005
2011-08-15 18:55:52 +00:00
Gabor Juhos
67e480971c ramips: add input drivers to the default package list
SVN-Revision: 28003
2011-08-15 18:55:50 +00:00
Gabor Juhos
35ecf12059 ramips: rt305x: make config and factory partitions read-only on the ATP-52B
SVN-Revision: 28002
2011-08-15 18:55:48 +00:00
Gabor Juhos
75e2360ab3 ramips: add uci-defaults scripts to preconfigure USB LEDs
SVN-Revision: 28000
2011-08-15 14:12:00 +00:00
Gabor Juhos
e1b176de82 ramips: rt305x: add some USB modules to the default profile
SVN-Revision: 27999
2011-08-15 14:11:58 +00:00
Gabor Juhos
169d68c98c ramips: rt305x: add dwc_otg driver
Based on a patch by Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27997
2011-08-15 14:11:55 +00:00
Gabor Juhos
0ca16a4600 ramips: rt305x: register the dwc_otg device on the relevant boards
SVN-Revision: 27996
2011-08-15 14:11:52 +00:00
Gabor Juhos
addc86fdbd ramips: rt305x: add dwc_otg platform device
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 27995
2011-08-15 14:11:51 +00:00
Gabor Juhos
6ef87ff5e6 ramips: sync kernel config
SVN-Revision: 27993
2011-08-15 14:11:48 +00:00
Gabor Juhos
4ee4fc9725 ramips: load the input drivers during preinit
SVN-Revision: 27992
2011-08-15 14:11:47 +00:00
Gabor Juhos
a3c7e71ae1 ramips: add support for Argus ATP-52B
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
2011-08-15 14:11:45 +00:00
Gabor Juhos
1ebcf03789 ramips: allow to specify port layout for the switch of the RT305x/RT3350
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27990
2011-08-15 14:11:43 +00:00
Gabor Juhos
ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
Gabor Juhos
437e184484 ramips: rt305x: add support for the Asus RT-G32 B1 board
Based on a patch by: Sergiy <piratfm@gmail.com>

SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
Gabor Juhos
7193f29d96 ramips: rt305x: enable M25P80 driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27811
2011-07-28 10:56:28 +00:00
Gabor Juhos
c6db514de8 ramips: rt305x: introduce rt305x_register_spi helper
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27810
2011-07-28 10:56:27 +00:00
Gabor Juhos
57122e7ccc ramips: add SPI controller driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
Gabor Juhos
3f986df05f ramips: rt305x: add support for the DIR-600 B1,B2 boards
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
Gabor Juhos
857c1028ac ramips: rt305x: change machine id for DIR-300
SVN-Revision: 27807
2011-07-28 10:56:22 +00:00
Gabor Juhos
42d3a55347 ramips: rt305x: rename LEDs on the DIR-300-B1
SVN-Revision: 27806
2011-07-28 10:56:21 +00:00
Gabor Juhos
39689b648f ramips: rt305x: sort Kconfig/Makefile entries
SVN-Revision: 27805
2011-07-28 10:56:19 +00:00
Gabor Juhos
32c0534516 ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B

Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>

SVN-Revision: 27804
2011-07-28 10:56:18 +00:00
Gabor Juhos
57663ce25b ramips: fix PWH2004 image generation
SVN-Revision: 27803
2011-07-28 10:56:15 +00:00
Felix Fietkau
1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
Gabor Juhos
abb1ca01a7 ramips: fix buffalo image generation
SVN-Revision: 27495
2011-07-06 16:46:33 +00:00
Gabor Juhos
1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004
Also sort the board names alphabetically.

SVN-Revision: 27478
2011-07-06 08:05:00 +00:00
Gabor Juhos
d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board
SVN-Revision: 27477
2011-07-06 08:04:55 +00:00
Gabor Juhos
2cc346b8e0 ramips: create tftp image for the WHR-G300N board
SVN-Revision: 27476
2011-07-06 08:04:54 +00:00
Gabor Juhos
0dc18d8586 ramips: create factory image for the WHR-G300N board
SVN-Revision: 27474
2011-07-06 08:04:52 +00:00
Gabor Juhos
e9c8218375 ramips: create factory image for DIR-300-B1
SVN-Revision: 27439
2011-07-04 06:48:45 +00:00
Gabor Juhos
6e7b802297 ramips: merge 2.6.39 patches
SVN-Revision: 27399
2011-07-03 15:02:10 +00:00
Gabor Juhos
646f64d389 ramips: remove 2.6.37 stuff
SVN-Revision: 27398
2011-07-03 15:02:09 +00:00
Gabor Juhos
2fc6be00f4 ramips: switch to 2.6.39.2
SVN-Revision: 27397
2011-07-03 15:02:07 +00:00
Gabor Juhos
0fde070cf9 ramips: add 2.6.39 support
Based on the patches from #9625

SVN-Revision: 27396
2011-07-03 15:02:06 +00:00
Gabor Juhos
c8010517d5 ramips: add hotplug script to extract eeprom for the rt2x00 driver
SVN-Revision: 27393
2011-07-03 15:02:01 +00:00
Gabor Juhos
3334d0604e ramips: specify eeprom file name on RT305X
SVN-Revision: 27392
2011-07-03 15:02:00 +00:00
Gabor Juhos
f53cc4c439 ramips: specify eeprom file name on RT288X
SVN-Revision: 27391
2011-07-03 15:01:59 +00:00
Gabor Juhos
521e495f4b ramips: add all supported boards to lib/ramips.sh
SVN-Revision: 27389
2011-07-03 15:01:56 +00:00
Gabor Juhos
6f54df889a ramips: check the size of the uImage in image generation
SVN-Revision: 27388
2011-07-03 15:01:55 +00:00
Gabor Juhos
575a5286c8 ramips: use lowercase partiion names on the WCR150GN board
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
Gabor Juhos
31facf0b75 ramips: use different partition names in the DIR-300-B1 image
SVN-Revision: 27386
2011-07-03 15:01:52 +00:00
Gabor Juhos
dbe55f08f0 ramips: force word write on flashes with AMD cmdset (#9252)
SVN-Revision: 27385
2011-07-03 15:01:51 +00:00
Gabor Juhos
f1cf43d468 ramips: update partition map for DIR-300-B1
Patch by Layne Edwards from #9252.

SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
Gabor Juhos
641c87b127 ramips: consistently use 'firmware' name for sysupgrade partitions
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
Gabor Juhos
381d7f05af ramips: fix a section mismatch warning
SVN-Revision: 27382
2011-07-03 15:01:46 +00:00
Gabor Juhos
16ad91d69f ramips: remove unused include from the common GPIO code
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
Gabor Juhos
c9f3e7082f ramips: disable watchdog on sysupgrade
SVN-Revision: 27380
2011-07-03 15:01:43 +00:00
Gabor Juhos
e70e6f6848 ramips: swap target check in image generation
SVN-Revision: 27379
2011-07-03 15:01:42 +00:00
Gabor Juhos
affb57ee27 ramips: update HW550-3G mtd partitions
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
Gabor Juhos
3099ffe414 ramips: set cp0_perfcount_irq for RT305X
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
Gabor Juhos
d5a7e2f5c1 ramips: initial board support for MOFI3500-3GN
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG).  This
router is basically the NA version of the HW550-3G.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26466
2011-04-04 08:43:07 +00:00
Hauke Mehrtens
50c743e79e kernel: Update to version 2.6.37.6
Thank you Peter Wagner for the patch

SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
Gabor Juhos
87f5872f35 ramips: remove 2.6.36 stuff
SVN-Revision: 26329
2011-03-27 19:20:06 +00:00
Gabor Juhos
90d37adb8d ramips: switch to 2.6.37
SVN-Revision: 26328
2011-03-27 19:20:04 +00:00
Gabor Juhos
1844ea6c7b ramips: UPF_FIXED_TYPE must be set for the serial ports
SVN-Revision: 26327
2011-03-27 19:20:03 +00:00
Gabor Juhos
9ef4785364 ramips: define GPIO chips separately for each SoCs
SVN-Revision: 26326
2011-03-27 19:19:59 +00:00
Gabor Juhos
37d6d88869 ramips: move GPIO definitions into a separate header file
SVN-Revision: 26325
2011-03-27 19:19:57 +00:00
Gabor Juhos
251a367fb4 ramips: setup GPIO chip functions on the fly
SVN-Revision: 26324
2011-03-27 19:19:51 +00:00
Gabor Juhos
b03f2dfcee ramips: use separate register base for GPIO chips
SVN-Revision: 26323
2011-03-27 19:19:48 +00:00
Gabor Juhos
8770359f17 ramips: fix dir-300 mtd layout
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 26322
2011-03-27 19:19:45 +00:00
Gabor Juhos
f599459abb ramips: enable MDIO on the HW550-3G board
SVN-Revision: 26321
2011-03-27 19:19:41 +00:00
Gabor Juhos
d701a72760 ramips: add sysupgrade and status LED support for HW550-3G
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26320
2011-03-27 19:19:40 +00:00
Felix Fietkau
335877a2b3 global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance
SVN-Revision: 26300
2011-03-26 01:07:12 +00:00
Gabor Juhos
23518bb2e4 ramips: initial board support for Aztech HW550-3G
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram).  Ethernet is not working yet.
Wireless appears to work fine.  USB does not work yet (as with other
Ralink boards).

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26123
2011-03-13 16:34:52 +00:00
Florian Fainelli
45c9f5e75e update to kernel 2.6.36.4
SVN-Revision: 25580
2011-02-19 12:44:07 +00:00
Gabor Juhos
1c92e047c8 ramips: register watchdog device on the rt288x boards
SVN-Revision: 25130
2011-01-26 20:48:52 +00:00
Gabor Juhos
2b50cecea6 ramips: add watchdog device for RT288x
SVN-Revision: 25129
2011-01-26 20:48:50 +00:00
Gabor Juhos
764aa3fe9c ramips: register watchdog device on the rt305x boards
SVN-Revision: 25128
2011-01-26 20:48:47 +00:00
Gabor Juhos
42e36cf732 ramips: add watchdog device for RT305x
SVN-Revision: 25127
2011-01-26 20:48:46 +00:00
Gabor Juhos
16366feafb ramips: add watchdog driver
SVN-Revision: 25126
2011-01-26 20:48:41 +00:00
Gabor Juhos
f38367fcb4 ramips: implement clock API for RT288x
SVN-Revision: 25125
2011-01-26 20:48:39 +00:00
Gabor Juhos
b0ffa70248 ramips: implement clock API for RT305X
SVN-Revision: 25124
2011-01-26 20:48:35 +00:00
Gabor Juhos
f9e74383a9 ramips: remove extern and __init from function prototypes
SVN-Revision: 25123
2011-01-26 20:48:33 +00:00
Gabor Juhos
b99a637795 ramips: ramips_esw: fix typos
Patch from #8577.

SVN-Revision: 24898
2011-01-04 13:44:05 +00:00
Gabor Juhos
d2fdd1dbe1 ramips: remove 2.6.3[24] support
SVN-Revision: 24562
2010-12-14 08:00:31 +00:00
Gabor Juhos
1403850be1 ramips: switch to 2.6.36
SVN-Revision: 24561
2010-12-14 08:00:29 +00:00
Gabor Juhos
f9898e30fb ramips: handle OTG interrupt on the RT305x SoC
SVN-Revision: 24560
2010-12-14 08:00:25 +00:00
Felix Fietkau
5a351509aa base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
SVN-Revision: 24540
2010-12-13 08:01:21 +00:00
Gabor Juhos
502d21dc2a ramips: ramips_esw: add more definitions
SVN-Revision: 24340
2010-12-08 10:15:33 +00:00
Gabor Juhos
bf58ef7c6d ramips: ramips_esw: add helper function to set pvid
SVN-Revision: 24339
2010-12-08 10:15:28 +00:00
Gabor Juhos
692d379b50 ramips: ramips_esw: add helper function to set vlan members
SVN-Revision: 24338
2010-12-08 10:15:25 +00:00
Gabor Juhos
f7c3f91074 ramips: ramips_esw: add helper function to set VLAN id
SVN-Revision: 24337
2010-12-08 10:15:22 +00:00
Gabor Juhos
0d2ad7a816 ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function
SVN-Revision: 24336
2010-12-08 10:15:16 +00:00
Gabor Juhos
7b878dde4b ramips: ramips_esw: use rt305x_esw prefix in function names
SVN-Revision: 24335
2010-12-08 10:15:14 +00:00
Gabor Juhos
0fcedc7bda ramips: ramips_esw: coding style cleanup
SVN-Revision: 24334
2010-12-08 10:15:12 +00:00
Gabor Juhos
48e6a31812 ramips: ramips_esw: add defines for switch register offsets
SVN-Revision: 24333
2010-12-08 10:15:07 +00:00
Gabor Juhos
74c13f06df ramips: ramips_esw: don't touch GPIO_PURPOSE register
It must have been set by the board initialization code.

SVN-Revision: 24332
2010-12-08 10:15:04 +00:00
Gabor Juhos
3b9a6adc7d ramips: ramips_esw: convert it to be a platform driver
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
Gabor Juhos
889729df01 ramips: ramips_esw: move hardware initialization into a separate function
SVN-Revision: 24330
2010-12-08 10:14:58 +00:00
Gabor Juhos
8957f39064 ramips: ramips_esw: use a private structure for the functions
SVN-Revision: 24329
2010-12-08 10:14:54 +00:00
Gabor Juhos
0449d92dd7 ramips: add support for 2.6.36
SVN-Revision: 24270
2010-12-05 20:14:38 +00:00
Gabor Juhos
01a5cb48c8 ramips: default profile fix
Fix package names in default profiles.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24269
2010-12-05 20:14:35 +00:00
Gabor Juhos
47dd3b9fea ramips: use tabs instead of spaces in mach-f5d8235-v2.c
SVN-Revision: 24268
2010-12-05 20:14:30 +00:00
Gabor Juhos
21c8d63505 ramips: add support for Belkin F5D8235 v2 board
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
Gabor Juhos
64b16b9f34 ramips: Use NET_IP_ALIGN instead of hardcoding 2
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24124
2010-11-24 10:01:18 +00:00
Gabor Juhos
624cfc5c91 ramips: DMA map the correct RX skb size
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24123
2010-11-24 10:01:16 +00:00
Gabor Juhos
f833e399f2 ramips: Don't trigger BUG_ON due to skb allocation failure
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24122
2010-11-24 10:01:12 +00:00
Gabor Juhos
c6e4124855 ramips: Remove unnecessary skb_put
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24121
2010-11-24 10:01:08 +00:00
Gabor Juhos
69355ee10e ramips: Allow ethernet interface to be taken down and up again
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 23243
2010-10-05 14:10:34 +00:00
Imre Kaloz
5f9a6a5431 upgrade kernel versions to the latest stable ones
SVN-Revision: 23219
2010-10-04 10:40:41 +00:00
Gabor Juhos
e5b081335e ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
Gabor Juhos
39c57eeb31 ramips: allow USB
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.

This patch is just a small step in that direction.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>

SVN-Revision: 23128
2010-09-27 14:42:07 +00:00
Hauke Mehrtens
09e05d833d kernel: update kernel version to 2.6.34.5
SVN-Revision: 22759
2010-08-22 13:26:06 +00:00
Gabor Juhos
462dabc7f5 ramips: add support for Sparklan WCR-150GN board
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 22658
2010-08-15 09:43:07 +00:00
Florian Fainelli
781c091ea5 fix jffs2 64k and 128k images overwrite each other
When trying to build images with jffs2 filesystem for ramips platform
there is only one jffs2 image produced instead of two (64k and 128k).

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 22435
2010-07-31 11:42:17 +00:00
Gabor Juhos
1ca67cba7f ramips: enable ethernet driver for rt288x
SVN-Revision: 22214
2010-07-15 19:45:49 +00:00
Gabor Juhos
2e45ce264d ramips: register ethernet device on the RT-N15
SVN-Revision: 22213
2010-07-15 19:45:46 +00:00
Gabor Juhos
c2ebadc504 ramips: add generic ethernet device for the RT288x
SVN-Revision: 22212
2010-07-15 19:45:43 +00:00
Gabor Juhos
0d8c036e56 ramips: add mdio_cfg configuration for the ethernet driver
SVN-Revision: 22211
2010-07-15 19:45:40 +00:00
Gabor Juhos
d14e9e706e ramips: Fix bridging in ramips ethernet driver
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.

The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.

Fix this by using skb_put to correctly set skb->len and skb->tail.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 22172
2010-07-13 16:52:07 +00:00
Gabor Juhos
27375c5139 ramips: protect GPIO register access with a spinlock
SVN-Revision: 22171
2010-07-13 16:52:04 +00:00
Gabor Juhos
9ee8b1f8c6 ramips: sync kernel config
SVN-Revision: 22170
2010-07-13 16:52:02 +00:00
Hauke Mehrtens
e2ce2feedb kernel: update to kernel 2.6.34.1
SVN-Revision: 22118
2010-07-10 22:39:52 +00:00
Alexandros C. Couloumbis
cd2069a57c fix commit r21994 (thanks juhosg)
SVN-Revision: 21995
2010-06-30 19:46:45 +00:00
Alexandros C. Couloumbis
0409c64e34 fix commit r21993
SVN-Revision: 21994
2010-06-30 19:35:12 +00:00
Gabor Juhos
2dfcdb9465 generic: merge mips multi machine update to generic patches for 2.6.34
SVN-Revision: 21675
2010-06-04 19:09:52 +00:00
Gabor Juhos
383bd396fa generic: merge mips multi machine update to generic patches for 2.6.32
SVN-Revision: 21673
2010-06-04 19:09:46 +00:00
John Crispin
971b7ff50e Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
Signed-off-by: Helmut Schaa

SVN-Revision: 21643
2010-05-31 11:57:32 +00:00
Daniel Dickinson
ba2b75f710 ramips: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ramips.sh was sourced
SVN-Revision: 21635
2010-05-30 03:21:00 +00:00
Gabor Juhos
c24397b385 ramips: merge slab patch
SVN-Revision: 21607
2010-05-28 19:45:28 +00:00
Gabor Juhos
7ac21ada55 ramips: use COMMAND_LINE_SIZE directly
SVN-Revision: 21606
2010-05-28 19:45:24 +00:00
Gabor Juhos
178e4e9927 ramips: add missing 2.6.34 config files
SVN-Revision: 21605
2010-05-28 19:45:21 +00:00
Gabor Juhos
b86455a7ec ramips: refresh 2.6.34 patches
SVN-Revision: 21604
2010-05-28 19:45:16 +00:00
Gabor Juhos
fdf1561386 ramips: sync 2.6.32 config
SVN-Revision: 21603
2010-05-28 19:45:10 +00:00
John Crispin
0ab7d18462 update to 2.6.34, signed of by russiane39, thx
SVN-Revision: 21573
2010-05-26 15:53:05 +00:00
Hauke Mehrtens
b18a1d217b kernel: update kernel to version 2.6.32.13 and 2.6.33.4
SVN-Revision: 21540
2010-05-23 13:16:51 +00:00
Alexandros C. Couloumbis
fdac9ae836 sync to kernel 2.6.32.12
SVN-Revision: 21195
2010-04-27 14:30:08 +00:00
Nicolas Thill
37b02afe6a package/kernel: use common gpio- & wdt- prefixes for GPIO and watchdog module names
SVN-Revision: 21137
2010-04-24 14:08:49 +00:00
Gabor Juhos
60cbdbb686 ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
SVN-Revision: 21083
2010-04-22 09:25:37 +00:00
Nicolas Thill
3162bc1ecf target/ramips: fix another typo from [20834] (closes: #7182)
SVN-Revision: 21012
2010-04-19 01:14:29 +00:00
Nicolas Thill
e2b57ecf5f define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
Gabor Juhos
de18353622 ramips: nuke clocksource init patch
SVN-Revision: 20802
2010-04-11 17:47:30 +00:00
Gabor Juhos
b4bb5ebfaa ramips: generate sysupgrade images for the rt305x devices
SVN-Revision: 20801
2010-04-11 17:47:28 +00:00
Gabor Juhos
7581054e93 ramips: add sysupgrade support
SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
Gabor Juhos
09aec474af ramips: add diag support
SVN-Revision: 20799
2010-04-11 17:47:23 +00:00
Gabor Juhos
2872bade69 ramips: enable image commandline hack and cmdline partition parsing
SVN-Revision: 20798
2010-04-11 17:47:20 +00:00
Gabor Juhos
af05b16c98 ramips: add default profiles
SVN-Revision: 20797
2010-04-11 17:47:17 +00:00
Gabor Juhos
0abc7e6d53 ramips: add wpad-mini to the default packages
SVN-Revision: 20632
2010-03-31 09:58:33 +00:00
Gabor Juhos
a423c3abee ramips: annotate device register function prototypes with __init
SVN-Revision: 20627
2010-03-31 08:40:28 +00:00
Gabor Juhos
a9f313edea ramips: register wifi device for the RT2880 based boards
SVN-Revision: 20625
2010-03-31 08:40:23 +00:00
Gabor Juhos
9f3d673dbc ramips: add wifi device for the RT2880 as well
SVN-Revision: 20624
2010-03-31 08:40:20 +00:00
Gabor Juhos
1c25cfcde0 ramips: register wifi device on the rt305x based boards
SVN-Revision: 20616
2010-03-30 21:24:10 +00:00
Gabor Juhos
ce2ac05602 ramips: sync kernel config
SVN-Revision: 20614
2010-03-30 21:24:05 +00:00
John Crispin
6f4052abe0 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 20599
2010-03-30 12:04:05 +00:00
John Crispin
3ad14f304e Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 20596
2010-03-30 10:06:05 +00:00
Gabor Juhos
e66a368bd1 kernel: update to 2.6.32.10
SVN-Revision: 20444
2010-03-26 10:45:25 +00:00
Felix Fietkau
2d305bdc23 the mips -ffreestanding patch has been unnecessary for a long time now, remove it
SVN-Revision: 20149
2010-03-11 18:48:50 +00:00
Nicolas Thill
e1863691d9 do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370])
SVN-Revision: 20136
2010-03-11 09:50:11 +00:00
Hauke Mehrtens
0c7b285613 kernel: update to kernel 2.6.32.9
SVN-Revision: 19890
2010-02-28 10:16:47 +00:00
Travis Kemen
5c75e1dd02 update kernel from 2.6.32.7 to 2.6.32.8, thanks tripolar
SVN-Revision: 19591
2010-02-12 01:12:11 +00:00
Imre Kaloz
825b37cc56 clean up handling of some kernel symbols
SVN-Revision: 19581
2010-02-11 09:33:16 +00:00
Imre Kaloz
0a52bc58f8 re-sort all target and subtarget config files
SVN-Revision: 19580
2010-02-11 08:55:15 +00:00
Gabor Juhos
1e4e3b21fb ramips: nuke 2.6.30 support
SVN-Revision: 19466
2010-01-31 17:56:41 +00:00
Gabor Juhos
bdc1565554 ramips: enable RTL8366SR driver for the RT288x devices
SVN-Revision: 19465
2010-01-31 17:56:38 +00:00
Gabor Juhos
4267623e2e ramips_eth: cleanup mac_address changing
SVN-Revision: 19464
2010-01-31 17:56:36 +00:00
Gabor Juhos
b16aaf5fac ramips_eth: update register offsets
SVN-Revision: 19463
2010-01-31 17:56:33 +00:00
Gabor Juhos
72b08b729a ramips_eth: pass sys_clk via platform_data
SVN-Revision: 19462
2010-01-31 17:56:30 +00:00
Gabor Juhos
9ab88ce62d ramips_eth: add helper functions to {ed,dis}able interrupts
SVN-Revision: 19446
2010-01-31 12:48:53 +00:00
Gabor Juhos
224edd2575 ramips_eth: remove unnecessary typecasts
SVN-Revision: 19445
2010-01-31 12:48:51 +00:00
Gabor Juhos
8aceaf96be ramips_eth: simplify tx_next computation
SVN-Revision: 19444
2010-01-31 12:48:48 +00:00
Gabor Juhos
21b06bd2c0 ramips_eth: simplify tx descriptor initialization
SVN-Revision: 19443
2010-01-31 12:48:46 +00:00
Gabor Juhos
d0fb66e3a4 ramips_eth: pass 'raeth_priv' struct directly to dma specific functions
SVN-Revision: 19442
2010-01-31 12:48:43 +00:00
Gabor Juhos
c9d8869d1b ramips: switch to 2.6.32
SVN-Revision: 19441
2010-01-31 12:48:41 +00:00
Gabor Juhos
f0be6ab20c ramips_eth: convert to use netdev_ops
SVN-Revision: 19440
2010-01-31 12:48:38 +00:00
Gabor Juhos
d37975f6b2 ramips_eth: fix invalid register writes
SVN-Revision: 19417
2010-01-30 15:26:02 +00:00
Gabor Juhos
43e1dd85c2 ramips_eth: move memset call out from the loop
SVN-Revision: 19416
2010-01-30 15:25:59 +00:00
Gabor Juhos
ea4ce3b6fd ramips_eth: header file cleanup
SVN-Revision: 19415
2010-01-30 15:25:57 +00:00
Gabor Juhos
67cd819da6 ramips_eth: coding style cleanup
SVN-Revision: 19414
2010-01-30 15:25:55 +00:00
Gabor Juhos
a4e85bbceb ramips: register gpio buttons on the Fonera 2.0N board
SVN-Revision: 19413
2010-01-30 15:25:52 +00:00
Gabor Juhos
8823482a02 ramips: register gpio buttons on the WHR-G300N board
SVN-Revision: 19412
2010-01-30 15:25:49 +00:00
Gabor Juhos
35f47a3654 ramips: register gpio buttons on the V22RW-2x2 board
SVN-Revision: 19411
2010-01-30 15:25:47 +00:00
Gabor Juhos
30a397fd5e ramips: register gpio buttons on the DIR-300 revB board
SVN-Revision: 19410
2010-01-30 15:25:44 +00:00
Gabor Juhos
f9b053e87f ramips: fix wrong base addresses for the RT288x
SVN-Revision: 19409
2010-01-30 15:25:41 +00:00
Gabor Juhos
8448caa6ad ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'
SVN-Revision: 19408
2010-01-30 15:25:36 +00:00
Gabor Juhos
94c9590e91 ramips: rename dev_gpio_leds.h to dev-gpio-leds.h
SVN-Revision: 19407
2010-01-30 15:25:33 +00:00
Gabor Juhos
55185915de ramips: cleanup WZR-AGL300NH board support file
SVN-Revision: 19406
2010-01-30 15:25:29 +00:00
Gabor Juhos
0530dd9849 ramips: register gpio-buttons on the RT-N15 board
SVN-Revision: 19405
2010-01-30 15:25:25 +00:00
Gabor Juhos
9327f02b7b ramips: add common gpio-buttons device
SVN-Revision: 19404
2010-01-30 15:25:20 +00:00
Gabor Juhos
4af1f533bb ramips: register rtl8366s device on the RT-N15 board
SVN-Revision: 19403
2010-01-30 15:25:16 +00:00
Gabor Juhos
e2dde81ead ramips: sanitize return value of ramips_gpio_get
SVN-Revision: 19401
2010-01-30 15:25:08 +00:00
Gabor Juhos
af9f40e60d ramips: update mips multi-machine stuff
SVN-Revision: 19400
2010-01-30 15:25:03 +00:00
Gabor Juhos
b34feab713 ramips: add preliminary support for 2.6.32
SVN-Revision: 19343
2010-01-26 09:57:38 +00:00
Gabor Juhos
c5ac3f64ab ramips: refresh patches
SVN-Revision: 19342
2010-01-26 09:57:34 +00:00
Gabor Juhos
03aa95b791 ramips: sync kernel config
SVN-Revision: 19341
2010-01-26 09:57:32 +00:00
Jo-Philipp Wich
6351d88e29 add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com>
SVN-Revision: 19321
2010-01-24 23:31:49 +00:00
Florian Fainelli
a47b8566a1 update to 2.6.30, refresh patches
SVN-Revision: 18635
2009-12-04 14:52:45 +00:00
Imre Kaloz
6b280112f2 some more Kconfig symbol move..
SVN-Revision: 18371
2009-11-11 11:52:41 +00:00
Imre Kaloz
1d62d9a95c another round of kernel config cleanups
SVN-Revision: 18370
2009-11-11 11:42:24 +00:00
Imre Kaloz
ef42fb4c13 sort all target config files
SVN-Revision: 18367
2009-11-11 09:27:13 +00:00
Gabor Juhos
b624dec41b ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards
SVN-Revision: 18229
2009-10-30 15:15:41 +00:00
John Crispin
9364f83dbc missing header file changes, and fix mtu value
SVN-Revision: 18220
2009-10-30 09:18:40 +00:00
John Crispin
ff5deeef08 fixes rx path for eth, spinlock it, increases buffer size, board now survives ping -f
SVN-Revision: 18212
2009-10-29 21:08:11 +00:00
John Crispin
135111a05b hopefully fixes dma issues seen on ethernet driver when under high load
SVN-Revision: 18203
2009-10-29 12:51:45 +00:00
Gabor Juhos
bc59e3da51 ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips_eth.h'
SVN-Revision: 18176
2009-10-26 17:17:51 +00:00
Gabor Juhos
5dd653a6bd ramips: use definitions from rt305x_regs, and nuke the duplicated ones
SVN-Revision: 18175
2009-10-26 17:17:48 +00:00
Gabor Juhos
c170980c4f ramips: move ramips_eth_platform_data into a separate file
SVN-Revision: 18174
2009-10-26 17:17:45 +00:00
Gabor Juhos
b98fa096a6 ramips: request_irq prior to dma allocation, and handle the case if it fails
SVN-Revision: 18173
2009-10-26 17:17:42 +00:00
Gabor Juhos
08f77d2e7e ramips: add error handling to ramips_alloc_dma
SVN-Revision: 18172
2009-10-26 17:17:39 +00:00
Gabor Juhos
941c1dae2c ramips: free allocated skbs in ramips_cleanup_dma
SVN-Revision: 18171
2009-10-26 17:17:37 +00:00
Gabor Juhos
82cc25d5f0 ramips: add ramips_setup_dma helper to the ethernet driver
SVN-Revision: 18170
2009-10-26 17:17:34 +00:00
Gabor Juhos
f69b042df9 ramips: add ramips_cleanup_dma helper
SVN-Revision: 18169
2009-10-26 17:17:29 +00:00
Gabor Juhos
defb7c0059 ramips: remove unnecessary includes in the ethernet driver
SVN-Revision: 18168
2009-10-26 17:17:26 +00:00
Gabor Juhos
36cb733d4f ramips: fix dma api usage in the ethernet driver
SVN-Revision: 18167
2009-10-26 17:17:22 +00:00
Gabor Juhos
69a3298ab5 ramips: use resource to pass irq and base address to the ethernet driver
SVN-Revision: 18166
2009-10-26 17:17:18 +00:00
Gabor Juhos
7c7f004875 ramips: add error-path handling to the ramips_eth_plat_probe
SVN-Revision: 18165
2009-10-26 17:17:13 +00:00
John Crispin
1729f7bdc1 use gpio_led package rather than staticly linking it into the kernel
SVN-Revision: 18154
2009-10-25 18:08:16 +00:00
John Crispin
f1ad6d3768 fixes licenses
SVN-Revision: 18152
2009-10-25 17:41:01 +00:00
John Crispin
6a56b1186e select CONFIG_LEDS_GPIO per default
SVN-Revision: 18151
2009-10-25 17:06:01 +00:00
John Crispin
6f63d7baf2 clean up dma api of ethernet driver
SVN-Revision: 18150
2009-10-25 16:58:00 +00:00
John Crispin
9126be5b6e fixes dma bug in eth driver, that was caused under high net load. the dma ring was not initialized on time
SVN-Revision: 18149
2009-10-25 14:34:55 +00:00
Gabor Juhos
984fe7992a ramips: nuke net_device stats from the private data of the ethernet driver
SVN-Revision: 18147
2009-10-25 09:37:30 +00:00
Gabor Juhos
ec836476b0 ramips: remove unnecessary type-castings in the ethernet driver
SVN-Revision: 18146
2009-10-25 09:37:27 +00:00
Gabor Juhos
ac92dc42d4 ramips: change debug message levels, and add missing LFs
SVN-Revision: 18145
2009-10-25 09:37:24 +00:00
Gabor Juhos
0fe967f6e6 ramips: make ethernet fuctions static
SVN-Revision: 18144
2009-10-25 09:37:21 +00:00
Gabor Juhos
7af7711f9f ramips: register ethernet device on the DIR-300 board
SVN-Revision: 18143
2009-10-25 09:37:17 +00:00
Gabor Juhos
2ad69183a8 ramips: change prom code to accept 'board=FOOBAR' from the command line
SVN-Revision: 18142
2009-10-25 07:10:16 +00:00
Gabor Juhos
d681005ce3 ramips: modify {read,write}_config helpers
SVN-Revision: 18141
2009-10-25 07:10:14 +00:00
Gabor Juhos
ebde2e4c90 ramips: nuke config_access helper
SVN-Revision: 18140
2009-10-25 07:10:11 +00:00
John Crispin
c23f92244c fixes dma hangups in eth
SVN-Revision: 18139
2009-10-25 00:11:08 +00:00
John Crispin
c7db1ecc33 select fon20n mach
SVN-Revision: 18137
2009-10-24 23:08:06 +00:00
John Crispin
eff75d868b make ethernet a platform device
SVN-Revision: 18135
2009-10-24 20:58:41 +00:00
John Crispin
5c399c6f20 missing define to make mach for fonera20n work
SVN-Revision: 18134
2009-10-24 20:57:59 +00:00
John Crispin
81e5a2d14b make default llll/w vlan setup in esw
SVN-Revision: 18133
2009-10-24 20:56:31 +00:00
John Crispin
e4e4aa90d3 adds mach type for fonera20n
SVN-Revision: 18132
2009-10-24 20:55:36 +00:00
John Crispin
5b2c123b60 fixes commit 18128, wrong patch :)
SVN-Revision: 18129
2009-10-23 16:52:48 +00:00
John Crispin
d95163658c adds ethernet driver, esw needs to be moved to swconfig, driver is missing rt288x support, not a platform device yet
SVN-Revision: 18128
2009-10-23 16:51:51 +00:00
Florian Fainelli
d4b251bdb8 update to 2.6.30.9
SVN-Revision: 18126
2009-10-23 12:10:25 +00:00
Gabor Juhos
279c5dad25 ramips: add preliminary support for the DIR-300 revB board
SVN-Revision: 18058
2009-10-18 08:48:07 +00:00
Gabor Juhos
9a65c14678 ramips: sync rt288x kernel config
SVN-Revision: 17976
2009-10-07 11:37:15 +00:00
Gabor Juhos
3b9cb8b673 ramips: fix return value in 'pcibios_map_irq' in the rt288x pci code
SVN-Revision: 17975
2009-10-07 11:37:12 +00:00
Gabor Juhos
13be9155c5 ramips: remove obsolete 'pcibios_fixups' from the rt288x pci code
SVN-Revision: 17974
2009-10-07 11:37:10 +00:00
Gabor Juhos
f2470f7590 ramips: add rt2880_pci_get_cfgaddr helper
SVN-Revision: 17973
2009-10-07 11:37:07 +00:00
Gabor Juhos
fe360a232b ramips: use switch statement instead of multiple if-else-if in the rt288x pci code
SVN-Revision: 17972
2009-10-07 11:37:03 +00:00
Gabor Juhos
37f5a64938 ramips: protect rt288x pci config accesses with a spinlock
SVN-Revision: 17971
2009-10-07 11:37:00 +00:00
Gabor Juhos
84e2f22465 ramips: make rt2880_pci_base static
SVN-Revision: 17970
2009-10-07 11:36:57 +00:00
Gabor Juhos
ca82f13970 ramips: define some magic values in the rt288x pci code
SVN-Revision: 17969
2009-10-07 11:36:53 +00:00
Gabor Juhos
6a54d033fc ramips: add copyright header to the rt288x pci code
SVN-Revision: 17968
2009-10-07 11:36:49 +00:00
Gabor Juhos
7f3d685eec ramips: make {read,write}_config static
SVN-Revision: 17920
2009-10-05 18:44:24 +00:00
Gabor Juhos
2739177201 ramips: convert 'config_access' function to void
SVN-Revision: 17919
2009-10-05 18:44:22 +00:00
Gabor Juhos
5b07caf121 ramips: add register access functions into the rt288x pci code
SVN-Revision: 17918
2009-10-05 18:44:19 +00:00
Gabor Juhos
0f51ed2723 ramips: fix RT2880_PCI_BASE definition
SVN-Revision: 17917
2009-10-05 18:44:16 +00:00
Gabor Juhos
5a37945317 ramips: rt288x pci code cleanup
SVN-Revision: 17916
2009-10-05 18:44:13 +00:00
Gabor Juhos
0e0e945e33 ramips: cleanup coding-style of the rt288x pci code
SVN-Revision: 17915
2009-10-05 18:44:10 +00:00
Gabor Juhos
6ceea98b0a ramips: merge ops-rt288x.c and rt288x_pci.h into pci-rt288x.c
SVN-Revision: 17914
2009-10-05 18:44:06 +00:00
Andy Boyett
c85a89348f move IMAGE_CMDLINE_HACK default to generic from targets
SVN-Revision: 17905
2009-10-05 17:05:34 +00:00
Gabor Juhos
c8489ba3f8 ramips: remove unneccesary ifdefs from the rt288x pci code
SVN-Revision: 17862
2009-10-05 09:06:16 +00:00
Gabor Juhos
e555522b95 ramips: remove unneccesary includes from the rt288x pci code
SVN-Revision: 17861
2009-10-05 09:06:13 +00:00
Gabor Juhos
f992f34277 ramips: add Kbuild patch for the rt288x pci code, and fix invalid header file paths
SVN-Revision: 17860
2009-10-05 09:06:10 +00:00
Gabor Juhos
e4741622cc ramips: add missing config option
SVN-Revision: 17859
2009-10-05 09:04:43 +00:00
John Crispin
a70ef0c337 adds pci support for rt288x
SVN-Revision: 17855
2009-10-04 19:53:17 +00:00
Gabor Juhos
054c54512f kernel: upgrade to 2.6.30.8 and refresh patches
SVN-Revision: 17804
2009-10-01 10:07:32 +00:00
Felix Fietkau
dc12314e83 ramips: since both subtargets are marked as broken, move FEATURES to the main target and mark the whole target as broken. avoids unnecessary user confusion about inexplicable build failures
SVN-Revision: 17728
2009-09-25 21:01:42 +00:00
Imre Kaloz
85fcc97a13 update to latest 2.6.27 and 2.6.30 kernels
SVN-Revision: 17602
2009-09-17 11:22:33 +00:00
Gabor Juhos
47c0d7419f kernel: get rid of the simple_prom_emulator, it is not really useful
SVN-Revision: 17567
2009-09-10 18:30:20 +00:00
Gabor Juhos
d59f5b3a98 kernel: add generic image_cmdline hack to MIPS targets
SVN-Revision: 17563
2009-09-10 18:30:01 +00:00
Florian Fainelli
3ce53b8d92 update to 2.6.30.6, compile tested on some targets only
SVN-Revision: 17549
2009-09-09 07:35:06 +00:00
Gabor Juhos
28250aaa31 add missing GPIO register offsets
SVN-Revision: 17513
2009-09-04 15:08:29 +00:00
Gabor Juhos
8d8a4e7274 add GPIO configuration feature
SVN-Revision: 17512
2009-09-04 15:08:26 +00:00
Gabor Juhos
b5e6d76dea fix a typo
SVN-Revision: 17474
2009-09-02 15:31:03 +00:00
Gabor Juhos
09677bf748 initial support for the AP-R3052-V22RW-2X2 board
SVN-Revision: 17473
2009-09-02 15:31:00 +00:00
Gabor Juhos
c4385d3282 use common code for early_serial setup
SVN-Revision: 17467
2009-09-02 12:44:17 +00:00
Gabor Juhos
73b20f8194 share prom code
SVN-Revision: 17466
2009-09-02 10:04:12 +00:00
Gabor Juhos
552e298755 initial support for Asus RT-N15
SVN-Revision: 17463
2009-09-01 19:34:27 +00:00
Gabor Juhos
01657335b9 cache_line_size is 16 on rt288x
SVN-Revision: 17462
2009-09-01 19:34:24 +00:00
Gabor Juhos
2dbe6d0e6f remove unused *_MACH_GENERIC config options
SVN-Revision: 17461
2009-09-01 19:34:21 +00:00
Gabor Juhos
d685777386 fix a typo
SVN-Revision: 17460
2009-09-01 19:34:18 +00:00
Gabor Juhos
298202afb8 share machine registration code
SVN-Revision: 17456
2009-08-31 18:53:34 +00:00
Gabor Juhos
aec7426483 use common get_system_type function
SVN-Revision: 17455
2009-08-31 18:53:31 +00:00
Gabor Juhos
f4afb9a4f9 share memory size detection code
SVN-Revision: 17454
2009-08-31 18:53:26 +00:00
Gabor Juhos
3cc0bc9038 add common setup code
SVN-Revision: 17453
2009-08-31 18:53:22 +00:00
Gabor Juhos
4dd57199a2 rt288x: readd RT2880_INTC_BASE definition
SVN-Revision: 17452
2009-08-31 15:35:54 +00:00
Gabor Juhos
f62337417c rt288x: fix serial console
SVN-Revision: 17450
2009-08-31 09:34:07 +00:00
Gabor Juhos
ff92681121 register GPIO LEDs on the WHR-G300N board
SVN-Revision: 17449
2009-08-31 09:14:18 +00:00
Gabor Juhos
19a462c9e3 add common GPIO LED support
SVN-Revision: 17448
2009-08-31 09:14:14 +00:00
Gabor Juhos
cf10d5fa39 rt305x: remove HW_HAS_PCI config option
SVN-Revision: 17447
2009-08-31 08:29:23 +00:00
Gabor Juhos
73ef265227 fix GPIOLIB support
SVN-Revision: 17446
2009-08-31 08:29:19 +00:00
Gabor Juhos
15b832c0b7 rt288x: fix build error
SVN-Revision: 17444
2009-08-30 20:13:13 +00:00
Gabor Juhos
9eaea39ae5 platform.h is rt288x specific, move it
SVN-Revision: 17443
2009-08-30 20:13:10 +00:00
Gabor Juhos
8049111b19 rt288x: generic machine code cleanup
SVN-Revision: 17442
2009-08-30 19:55:55 +00:00
Gabor Juhos
d034b4246e header cleanup
SVN-Revision: 17441
2009-08-30 19:55:53 +00:00
Gabor Juhos
6b482c872b share common INTC code
SVN-Revision: 17440
2009-08-30 19:15:58 +00:00
Gabor Juhos
051c44e0c5 initial support for RT288x/RT305x
SVN-Revision: 17439
2009-08-30 19:15:51 +00:00