Gabor Juhos 3b17f1deb8 ramips: Add swconfig support to ramips_esw.c ... Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33299		2012-08-29 10:37:36 +00:00
..
base-files	ramips: add RSSI leds for uci-defaults for ALL0256N	2012-08-22 09:46:30 +00:00
files	ramips: Add swconfig support to ramips_esw.c	2012-08-29 10:37:36 +00:00
image	ramips: fix board parameter for the NBG-419N (#12061)	2012-08-22 17:55:12 +00:00
patches-3.3	enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.	2012-07-24 20:38:08 +00:00
rt288x	linux: move certain disabled symbols to the generic configs	2012-05-15 10:58:52 +00:00
rt305x	ramips: add profile for Allnet devices	2012-08-22 12:36:35 +00:00
rt3883	linux: move certain disabled symbols to the generic configs	2012-05-15 10:58:52 +00:00
base-files.mk	ramips: remove default network configuration, and generate that from uci-defaults	2011-12-01 22:48:51 +00:00
Makefile	bump to 3.3.8	2012-06-05 06:57:51 +00:00
modules.mk	move rt305x-dwc driver to target specific modules.mk	2012-07-25 15:50:42 +00:00