ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
36,336 Commits 9 Branches 76 Tags 913 MiB
636a069c42
Commit Graph

834 Commits

Author SHA1 Message Date
Gabor Juhos
ef944dcb85 kernel: update 3.10 to 3.10.2 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37502
 2013-07-22 15:31:13 +00:00
Jonas Gorski
b1b4e7db13 kernel: move CONFIG_NET_IP_TUNNEL to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37465
 2013-07-19 22:58:01 +00:00
Hauke Mehrtens
c7f8cb3f4f kernel: update bcma and ssb to version from wireless-testing/master tag master-2013-07-18 
This should fix some build problems in b43 with kernel 3.3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37432
 2013-07-19 12:02:34 +00:00
Hauke Mehrtens
866e229299 brcm47xx: fix name of patch 
SVN-Revision: 37340
 2013-07-15 11:42:54 +00:00
Hauke Mehrtens
f8d55e7541 brcm47xx: use b53 phy driver for the switch in kernel 3.10 
This makes it possible to use swconfig to controll the switch.

This was tested with devices using b43 and bgmac.
This was not tested on devices using tg3.
This does not support the adm switch used in some very old devices.

SVN-Revision: 37304
 2013-07-14 14:11:17 +00:00
Hauke Mehrtens
a5c0ad6354 brcm47xx: add initial support for kernel 3.10 
SVN-Revision: 37287
 2013-07-14 13:44:45 +00:00
Hauke Mehrtens
3bc90a4d23 brcm47xx: fix switch handling 
This fixes some problems with the switch handling

 * It now send the messages again to indicate a button for failsafe mode should be pressed
 * it does not leak packages between wan and lan any more
 * the switch works again in normal mode

The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.

This should close #13869, #13868 and #13716

SVN-Revision: 37286
 2013-07-14 13:19:58 +00:00
Hauke Mehrtens
ef0b9be95e brcm47xx: do not load the kernel modules needed for Ethernet manually 
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.

SVN-Revision: 37284
 2013-07-14 12:59:00 +00:00
Hauke Mehrtens
e800436de3 brcm47xx: do not change nvram without user interaction 
SVN-Revision: 37281
 2013-07-14 12:56:42 +00:00
Hauke Mehrtens
e041d370a7 brcm47xx: proc gets mounted without this patch 
SVN-Revision: 37272
 2013-07-13 21:42:19 +00:00
Hauke Mehrtens
8dabd7a26b brcm47xx: remove obsolete hotplug stuff 
SVN-Revision: 37271
 2013-07-13 20:38:33 +00:00
John Crispin
541bede918 brcm47xx: fix module insert order 
https://dev.openwrt.org/ticket/13811

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37161
 2013-07-04 13:31:13 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images 
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
 2013-06-27 19:58:31 +00:00
John Crispin
39df8d1a45 brcm47xx: dont manually insmod switch drivers 
Signed-off-by: John Crispin <bloic@openwrt.org>

SVN-Revision: 36993
 2013-06-21 16:53:15 +00:00
Hauke Mehrtens
9492d445de brcm47xx: run make kernel_oldconfig for 3.9 kernel config 
SVN-Revision: 36928
 2013-06-12 14:51:50 +00:00
Hauke Mehrtens
87f994d16d brcm47xx: remove support for kernel 3.6 
SVN-Revision: 36927
 2013-06-12 14:48:45 +00:00
Hauke Mehrtens
990423f3ef brcm47xx: add initial support for kernel 3.9 
SVN-Revision: 36926
 2013-06-12 14:47:53 +00:00
Gabor Juhos
46225b99d9 kernel: update linux 3.8 to 3.8.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
 2013-05-26 16:02:31 +00:00
Jonas Gorski
526aedb705 kernel: move CONFIG_MIPS_SEAD3 to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36617
 2013-05-12 21:41:55 +00:00
Gabor Juhos
e57c7d6c12 kernel: update linux 3.8 to 3.8.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
 2013-05-08 08:53:53 +00:00
Gabor Juhos
8a9fe26f20 kernel: update linux 3.8 to 3.8.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
 2013-05-01 22:15:18 +00:00
Hauke Mehrtens
ca7f9638d5 broadcom-diag: support for the WNDR3700v3 
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.

The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 36482
 2013-04-28 21:11:17 +00:00
Hauke Mehrtens
7dee0dae35 brcm47xx: use kernel 3.8.10 as default kernel 
The biggest change with this kernel is a new partition parser.

SVN-Revision: 36480
 2013-04-28 18:25:16 +00:00
Hauke Mehrtens
00a7ace7cf brcm47xx: add board detection for NETGEAR WNDR4500 V2 
SVN-Revision: 36478
 2013-04-28 18:19:31 +00:00
Hauke Mehrtens
1bac172c44 kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26. 
SVN-Revision: 36473
 2013-04-28 16:52:11 +00:00
Gabor Juhos
36d4fd70bc kernel: update linux 3.8 to 3.8.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
 2013-04-26 16:55:42 +00:00
Felix Fietkau
f58dcb59c6 kernel: backport SSB/BCMA changes in preparation for a compat-wireless update 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36367
 2013-04-19 12:39:40 +00:00
Hauke Mehrtens
4a46687d25 brcm47xx: use old partition names again for kernel 3.8 
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

Thank you russell for spotting this problem.

SVN-Revision: 36235
 2013-04-06 22:22:26 +00:00
Hauke Mehrtens
204bde8d98 brcm47xx: fix error in board detection when nvram is not available. 
SVN-Revision: 36234
 2013-04-06 19:02:25 +00:00
Gabor Juhos
f78c902cfd kernel: update linux 3.8 to 3.8.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
 2013-04-06 11:40:44 +00:00
Hauke Mehrtens
98ef9e5411 brcm47xx: generate images for Linksys E.... models 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 36139
 2013-03-27 15:51:28 +00:00
Hauke Mehrtens
31c9452120 brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported. 
SVN-Revision: 36137
 2013-03-27 15:35:52 +00:00
Hauke Mehrtens
a9e5a178ef brcm47xx: generate images for more WRT...N models 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 36136
 2013-03-27 15:34:55 +00:00
Hauke Mehrtens
d5cf67297a brcm47xx: generate images for some more devices 
These devices should be supported by trunk now.

SVN-Revision: 36099
 2013-03-20 22:01:18 +00:00
Gabor Juhos
07532dca7f kernel: update linux 3.8 to 3.8.3 
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
 2013-03-15 14:39:51 +00:00
Hauke Mehrtens
e1f24d99e1 brcm47xx: refresh config 
SVN-Revision: 35948
 2013-03-10 20:42:26 +00:00
Hauke Mehrtens
44ed7d664a brcm47xx: add some more partition parser fixes by Rafał Miłecki 
SVN-Revision: 35912
 2013-03-09 19:48:03 +00:00
Hauke Mehrtens
694050a4cf brcm47xx: netconfig: add bacis support for swconfig 
Parse the cpu port from swconfig and explicitly mark the cpu port as tagged.

SVN-Revision: 35911
 2013-03-09 19:24:43 +00:00
Hauke Mehrtens
04af8bd108 brcm47xx: bgmac: omit the fcs 
This fixes #13058 and hopefully #12927

SVN-Revision: 35834
 2013-02-28 13:27:21 +00:00
Hauke Mehrtens
9805096f48 brcm47xx: bgmac: update to version form netdev git repository 
SVN-Revision: 35833
 2013-02-28 13:24:39 +00:00
Hauke Mehrtens
2c34e1aba5 brcm47xx: use bcm47xx_board_get() and detect some more boards in flash partition driver 
SVN-Revision: 35791
 2013-02-25 20:56:37 +00:00
Hauke Mehrtens
5d3b728372 brcm47xx: board detection WNDR3400v2 
WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#".

CFE and NVRAM contain different vars - example:
CFE line original: Device eth0:  hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0
CFE after openwrt: Device eth0:  hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0

Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html
Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2
(and on wikidevi for example)

Signed off by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 35790
 2013-02-25 20:55:46 +00:00
Hauke Mehrtens
0f2fc0adfd brcm47xx: use same board detection code as kernel 3.8 
SVN-Revision: 35770
 2013-02-24 18:10:42 +00:00
Hauke Mehrtens
9afdb046d3 brcm47xx: do not use vlan0 any more. 
The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325.

This makes OpenWrt always use vlan1 and vlan2 instead.

SVN-Revision: 35704
 2013-02-20 15:31:43 +00:00
Hauke Mehrtens
1a8218d6e4 brcm47xx: add initial support for kernel 3.8 
This contains the following new bigger changes:
 * new partition parser which still could lake some features or have bugs
 * new nand flash driver
 * using physmap-flash flash driver for parallel flash
 * some changes to the serial flash driver

With these changes OpenWrt starts using more of the mainline flash drivers.

SVN-Revision: 35632
 2013-02-16 20:28:24 +00:00
Hauke Mehrtens
ce6a7543fe brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch modules 
Adjust the "AutoLoad" number for the BGMAC module to be prior
to the switch modules.  This probably isn't real important as
the modules are loaded in the correct order by preinit anyway.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35625
 2013-02-16 16:27:33 +00:00
Hauke Mehrtens
9de704a03b brcm47xx: improve cpuport detection for filesafe 
Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X
Ask the switch driver where the CPU port is.

SVN-Revision: 35624
 2013-02-16 16:24:15 +00:00
Hauke Mehrtens
92d16f38d7 brcm47xx: fix network config on simpleshare 
The included patch will generate a correct network configuration on the simpletech simpleshare.

Thank you for the patch Will Holmes (RealOpty)

This closes #12361.

SVN-Revision: 35623
 2013-02-16 15:24:48 +00:00
Hauke Mehrtens
a21ba013f5 brcm47xx: handle return values of cfe_env_get() correctly. 
This closes #12746.

SVN-Revision: 35622
 2013-02-16 15:19:24 +00:00
Hauke Mehrtens
283bff02a2 brcm47xx: bgmac: fix unaligned accesses to network headers. 
SVN-Revision: 35621
 2013-02-16 14:38:17 +00:00
Hauke Mehrtens
5fed2916c3 brcm47xx: fix unaligned access to mac address 
The mac address should be aligned to u16 to prevent an unaligned access
in drivers/ssb/pci.c where it is casted to __be16.

This closes #9824.

SVN-Revision: 35618
 2013-02-16 13:46:00 +00:00
Hauke Mehrtens
d9580d224a brcm47xx: try to automatically detect if the wan port is at port 4 and not at port 0. 
This should fix #13000.

SVN-Revision: 35617
 2013-02-16 12:37:24 +00:00
Hauke Mehrtens
c0f6c75cf7 brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 8" and vlan0ports: "0 8" 
SVN-Revision: 35597
 2013-02-14 12:38:16 +00:00
Hauke Mehrtens
54ca3eed5d brcm47xx: configure vlan correctly on some recent devices. 
SVN-Revision: 35587
 2013-02-13 16:05:52 +00:00
Hauke Mehrtens
4663d424a3 brcm47xx: add some more fixes to bgmac 
Thank you Rafał Miłecki and Nathan Hintz

SVN-Revision: 35574
 2013-02-12 20:10:38 +00:00
Hauke Mehrtens
7c0208b336 brcm47xx: update tg3 to the version send upstream 
SVN-Revision: 35573
 2013-02-12 20:09:15 +00:00
Hauke Mehrtens
07db9e8eab brcm47xx: fix name of kmod-ocf-ubsec-ssb 
This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb.

Thank you Manuel Munz <freifunk@somakoma.de> for the patch.

SVN-Revision: 35509
 2013-02-06 22:51:25 +00:00
Hauke Mehrtens
a52832164b brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up 
This fixes #12927.

SVN-Revision: 35507
 2013-02-06 14:57:00 +00:00
Hauke Mehrtens
8ba8225686 brcm47xx: fix detection of Asus RT-N16 
This fixes #12936.

SVN-Revision: 35492
 2013-02-04 22:49:05 +00:00
Hauke Mehrtens
a1e3c0ca46 Add Failsafe support for Linksys E3000V1 / WRT610NV2 
Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2
in /lib/preinit/05_init_interfaces_brcm.  The list of devices will need to
be expanded.  Is there a way to determine the correct cpu_port to use in a
generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if
"/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists?  Could
a similar method be used in "/etc/init.d/netconfig"?

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35491
 2013-02-04 22:40:57 +00:00
Hauke Mehrtens
c2198aba32 brcm47xx: Fix switch config on 4716/53115 devices 
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 35490
 2013-02-04 22:38:37 +00:00
Hauke Mehrtens
68aeb7af8e brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe. 
SVN-Revision: 35341
 2013-01-27 21:48:28 +00:00
Hauke Mehrtens
e083c7926b brcm47xx: create image for Netgear WNDR3400 V1 
SVN-Revision: 35323
 2013-01-26 20:34:38 +00:00
Hauke Mehrtens
05623aebef brcm47xx: add initial board detection code 
SVN-Revision: 35322
 2013-01-26 20:34:00 +00:00
Hauke Mehrtens
a83d7bb109 brcm47xx: add gpio to irq function again 
SVN-Revision: 35321
 2013-01-26 20:33:23 +00:00
Hauke Mehrtens
76c12ff797 brcm47xx: change generic profiles 
The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.

SVN-Revision: 35314
 2013-01-24 14:38:10 +00:00
Hauke Mehrtens
2bf03f971d brcm47xx: BCMA - Update default IRQ assignment per upstream change 
Update the default IRQ assignment for unrecognized devices per
the upstream change.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35121
 2013-01-12 15:00:01 +00:00
Hauke Mehrtens
548cb59826 brcm47xx: update bgmac driver to the version in mainline kernel 
SVN-Revision: 35083
 2013-01-10 14:22:19 +00:00
Hauke Mehrtens
885eea1842 kernel: update bcma and ssb to master-2013-01-09 from wireless-testing 
SVN-Revision: 35080
 2013-01-10 14:05:18 +00:00
Hauke Mehrtens
7b0af8193b brcm47xx: BGMAC Driver corrections 
1) Fix what appears to be a logic error in bgmac_phy_advertise.

2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo
interface w/ the driver to work correctly.  I still have the issue
with the interface always being HD when the speed/duplex is set
manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35052
 2013-01-07 22:51:39 +00:00
Hauke Mehrtens
a105eea1a1 brcm47xx: various fixes and code cleanups for irq code 
This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34997
 2013-01-03 16:56:54 +00:00
Hauke Mehrtens
4443997fd8 brcm47xx: add bgmac driver 
This Ethernet driver is in early development stage and still has some problems.
This was working on my bcm4716 based device.

Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver.

SVN-Revision: 34995
 2013-01-03 02:05:22 +00:00
Hauke Mehrtens
8f6bdcffa1 brcm47xx: build b44 as a module 
SVN-Revision: 34994
 2013-01-03 02:00:25 +00:00
Hauke Mehrtens
22d62d311a brcm47xx: run ifup before starting the switch 
In addition check_module is not needed, nobody checks the return value.

SVN-Revision: 34993
 2013-01-03 01:59:43 +00:00
Hauke Mehrtens
97b2b601c7 brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core 
Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and
BCM4748 (per the Broadcom SDK).  IRQ Flag values greater than 7 are
ignored when setting the interrupt masks.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34990
 2013-01-03 01:56:13 +00:00
Hauke Mehrtens
f74e847301 brcm47xx: improve IRQ handling for bcma based devices 
This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34989
 2013-01-03 01:55:34 +00:00
Hauke Mehrtens
25afeba608 brcm47xx: add a new version of the nvram rewrite patch 
This is the version like it was send for mainline inclusion.

SVN-Revision: 34988
 2013-01-03 01:53:30 +00:00
Hauke Mehrtens
edc7ab525f brcm47xx: move patches already in the mainline kernel to the front 
SVN-Revision: 34987
 2013-01-03 01:51:31 +00:00
Hauke Mehrtens
76c767f122 brcm47xx: remove support for kernel version 3.3 
SVN-Revision: 34986
 2013-01-03 01:48:43 +00:00
Hauke Mehrtens
981b7410f8 brcm47xx: bcma: correct M25P32 serial flash ID 
Thank you Rafał Miłecki.

SVN-Revision: 34900
 2012-12-27 19:18:40 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) 
SVN-Revision: 34793
 2012-12-19 16:07:50 +00:00
Mirko Vogt
439a869090 Do not overload mount-call - trying to reduce confusion 
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

SVN-Revision: 34792
 2012-12-19 16:07:46 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
 2012-12-18 14:41:16 +00:00
Hauke Mehrtens
4901ac8225 brcm47xx: improve suppressing printing if a module was found in preinit function. 
Thank you Bastian Bittorf

SVN-Revision: 34680
 2012-12-14 22:45:12 +00:00
Hauke Mehrtens
6c8efbfdc0 brcm47xx: Additional BCM4716 support 
Additional BCM4716 support.  Still needs working ethernet driver.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34672
 2012-12-13 18:57:38 +00:00
Hauke Mehrtens
6672d869da brcm47xx: BCMA - Broadcom 2011 SDK Updates 
I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't
noticed any obvious changes in behavior with them applied; but thought I
should at least pass them on.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34670
 2012-12-13 18:54:04 +00:00
Hauke Mehrtens
97d22306da brcm47xx: return the real irq number in bcma_core_irq 
The irq signal numbers that are send by the cpu are increased by 2 from
the number programmed into the mips core by bcma.
Return the irq number on which the irqs are send in bcma_core_irq() now.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34669
 2012-12-13 18:51:10 +00:00
Hauke Mehrtens
71712ec522 brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way. 
SVN-Revision: 34655
 2012-12-13 00:12:42 +00:00
Hauke Mehrtens
5be97468f6 brcm47xx: use kernel 3.6.10 by default now 
SVN-Revision: 34654
 2012-12-13 00:11:55 +00:00
Hauke Mehrtens
235c065e12 brcm47xx: suppress printing if a module was found in preinit function. 
SVN-Revision: 34653
 2012-12-13 00:11:11 +00:00
Hauke Mehrtens
3a4a6cfd64 kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko 
SVN-Revision: 34652
 2012-12-13 00:09:55 +00:00
Hauke Mehrtens
1bd8db0bd6 kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing 
SVN-Revision: 34651
 2012-12-12 22:42:18 +00:00
Florian Fainelli
512baafc6b kernel/3.3: move OHCI and EHCI platform drivers to generic 
These patches are not specific to bcm47xx and will be used on other
platforms as well.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34501
 2012-12-05 14:18:05 +00:00
Hauke Mehrtens
2ac9ac5163 brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available. 
SVN-Revision: 34454
 2012-12-02 16:11:39 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
 2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8 
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
 2012-11-29 07:42:19 +00:00
Hauke Mehrtens
efd00e6240 brcm47xx: fix title of Bcm4705-wl profile 
SVN-Revision: 34378
 2012-11-25 16:41:00 +00:00
Hauke Mehrtens
a3d976aff5 brcm47xx: add profile for bcm4705 with wl driver 
SVN-Revision: 34336
 2012-11-25 16:15:27 +00:00
Hauke Mehrtens
aa8e887a46 brcm47xx: whitespace cleanups 
SVN-Revision: 34329
 2012-11-25 14:03:51 +00:00
Hauke Mehrtens
be77f9951c brcm47xx: fix cpu clock detection on ASUS WL-520gU 
The ASUS WL-520gU and some other similar Asus devices have a BCM5354
running at 200MHZ and not at 240 which is the default for this SoC.

This fixes #4083.

SVN-Revision: 34325
 2012-11-24 20:28:06 +00:00
Hauke Mehrtens
264873b3c5 brcm47xx: watchdog: deactivate NOWAYOUT. 
In the old configuration the SoC issued a reboot if the watchdog was
killed also if it was kill with TERM and not KILL.

This will fix #11724.

SVN-Revision: 34324
 2012-11-24 20:24:27 +00:00
Hauke Mehrtens
c62d86ecb8 brcm47xx: update watchdog driver 
This watchdog driver should work with SoC having a PMU.

This fixes #11720.

SVN-Revision: 34323
 2012-11-24 20:07:25 +00:00
Hauke Mehrtens
4fa5781a95 kernel: refresh patches 
SVN-Revision: 34253
 2012-11-18 21:40:30 +00:00
Hauke Mehrtens
86cc79ac98 brcm47xx: add support for kernel 3.6 
This is based on the patch by Peter Wagner.

SVN-Revision: 34252
 2012-11-18 21:27:00 +00:00
Hauke Mehrtens
485f9573f8 brcm47xx: revert r33935: check for .ELF header in partition parser 
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420.
With the patch the linux partition also contained the loader which is in the first 128KB.

SVN-Revision: 34201
 2012-11-15 16:39:45 +00:00
Hauke Mehrtens
31541f81c3 brcm47xx: remove double definition of kmod-tg3 added in r34150 
SVN-Revision: 34176
 2012-11-12 21:34:00 +00:00
Hauke Mehrtens
bac93bdd8e brcm47xx: fix cfe config detection on WGT634U broken in r33920 
Thanks Russell Senior for reporting this.

SVN-Revision: 34175
 2012-11-12 21:32:33 +00:00
Hauke Mehrtens
cadd36a303 brcm47xx: remove ssb-gige package 
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.

SVN-Revision: 34150
 2012-11-11 17:30:33 +00:00
Imre Kaloz
702fd5cdb5 generate images for the D-Link DWL-3150 as well 
SVN-Revision: 33961
 2012-10-27 09:42:58 +00:00
Hauke Mehrtens
6a699a8ae8 brcm47xx: check for .ELF header in partition parser 
The image format for the wgt634u is different from the normal format.
Without this patch the partition parser detects a 128kb bigger
partition after every update.

This closes #11420

Thank you b.sander for the patch.

SVN-Revision: 33935
 2012-10-25 19:49:20 +00:00
Hauke Mehrtens
dca633f1c8 kernel: update bcma and ssb to master-2012-10-18 from wireless-testing 
* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx

SVN-Revision: 33920
 2012-10-25 14:33:47 +00:00
Jonas Gorski
0d2cf5f9e3 kernel: move the bcma fallback sprom fix to generic 
bcm63xx needs the bcma fallback sprom fix, too.

SVN-Revision: 33896
 2012-10-23 10:57:49 +00:00
John Crispin
6993e19532 drop GPIODEV platform code 
SVN-Revision: 33825
 2012-10-17 21:53:37 +00:00
Hauke Mehrtens
07234dc8bd bcma: do not initialize deactivated PCIe cores 
Before it was tried to initialize the deactivated PCIe core in client
mode, but this causes the SoC to hang. Just do not initialize it at all
and ignore the core it is not working and nothing is connected to it
when the specific bit is set in the boardflags.

SVN-Revision: 33620
 2012-10-04 15:45:54 +00:00
Hauke Mehrtens
2819890839 use memcmp in mem size detection as suggested by blogic 
SVN-Revision: 33619
 2012-10-04 15:42:12 +00:00
Hauke Mehrtens
642fe7f10a bcma: use fallback sprom if sprom on card was not valid 
Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.

SVN-Revision: 33601
 2012-09-30 11:45:31 +00:00
Hauke Mehrtens
42952fd94f bcma: initialize sprom earlier 
The chip common and the PCIe code are accessing the sprom struct which
is not filled when these cores are initialized. Fix this by adding an
early initialize and fill the sprom struct before accessing it in other
code.

SVN-Revision: 33600
 2012-09-30 11:44:44 +00:00
Hauke Mehrtens
2d40590a23 run make kernel_oldconfig 
SVN-Revision: 33599
 2012-09-30 11:44:04 +00:00
Hauke Mehrtens
e5eefed084 ignore the last page on bcma based SoCs 
SVN-Revision: 33598
 2012-09-30 11:43:40 +00:00
Hauke Mehrtens
c9feffc332 Fix reading sprom from nvram without a prefix 
The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.

SVN-Revision: 33597
 2012-09-30 11:43:13 +00:00
Hauke Mehrtens
4d5c75a54e improve the check for the memory size 
This will hopefully fix bug #9360 and #9097 in trunk.

SVN-Revision: 33596
 2012-09-30 11:42:16 +00:00
Hauke Mehrtens
0818180715 activate failsafe on all ports of the switch and not just port 0. 
Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.

SVN-Revision: 33544
 2012-09-25 14:04:59 +00:00
Hauke Mehrtens
fd7b2b5141 deactivate mips wait instruction for MIPS 74K on Broadcom SoCs 
When not removing support for the wait instruction, when ruining on the
BCM4706 SoC the system stops after msleep() without an exception. I
haven't seen this problem on the other Broadcom SoCs with a 74K CPU,
but in the Broadcom SDK it is deactivated for all CPUs of this type.

SVN-Revision: 33496
 2012-09-20 14:51:57 +00:00
Florian Fainelli
57bd95734d brcm47xx/profiles/PS-1208MFG: remove reference to non-existing package 
The package block-hotplug doesn't exist, refer to block-mount instead.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33474
 2012-09-19 15:13:33 +00:00
Hauke Mehrtens
db18fa388d update fix-boot patch. 
Do not change the code any more but use the kconfig options

SVN-Revision: 33463
 2012-09-19 10:18:36 +00:00
Hauke Mehrtens
eeb3ad1860 update gpio patches 
SVN-Revision: 33462
 2012-09-19 10:17:51 +00:00
Gabor Juhos
43147ffec5 generic: move GENERIC_PWM symbol into the generic config 
SVN-Revision: 33383
 2012-09-13 06:38:31 +00:00
Hauke Mehrtens
95c141aaac add gpio sysfs entries 
This fixes #10256

SVN-Revision: 33369
 2012-09-11 15:04:20 +00:00
Hauke Mehrtens
847afa343f update profiles 
* add profile for BCM4705 based SoC using tg3 instead of b44
* remove redundant 105-Atheros.mk
* reorder

SVN-Revision: 33235
 2012-08-22 21:54:06 +00:00
Hauke Mehrtens
3133d4d8de remove unused file 
SVN-Revision: 33210
 2012-08-18 15:45:18 +00:00
Hauke Mehrtens
9eaee85cc2 make brcm47xx build only with bcma or only with ssb support. 
There are some ifdefs missing so when only ssb or only bcma was
selected in the kernel config it did not build.

SVN-Revision: 33209
 2012-08-18 14:08:35 +00:00
Hauke Mehrtens
f4d6baf498 update gpio patches 
SVN-Revision: 33208
 2012-08-18 11:51:35 +00:00
Hauke Mehrtens
a0fb060211 update tg3 driver 
SVN-Revision: 33004
 2012-08-05 20:27:40 +00:00
Hauke Mehrtens
35661401da generate image for Linksys e3200 
SVN-Revision: 33003
 2012-08-05 13:14:00 +00:00
Hauke Mehrtens
a71f347c30 brcm47xx: update gpio patch 
SVN-Revision: 33001
 2012-08-05 12:40:05 +00:00
Hauke Mehrtens
1d40a652ee brcm47xx: fix patch which moves the flash struct in wgt634u code 
SVN-Revision: 33000
 2012-08-05 12:39:15 +00:00
Hauke Mehrtens
0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself. 
SVN-Revision: 32992
 2012-08-04 19:46:25 +00:00
Hauke Mehrtens
0c75abf527 bcma: update to version from wireless-testing tag master-2012-07-16 
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880
 2012-07-26 15:42:18 +00:00
Florian Fainelli
c7a69869f7 move ubsec-ssb driver to target specific modules.mk 
SVN-Revision: 32863
 2012-07-25 15:50:38 +00:00
Florian Fainelli
d1b2087a35 move ssb-gige to target specific modules.mk 
SVN-Revision: 32862
 2012-07-25 15:50:36 +00:00
Florian Fainelli
c14d907b8b move usb driver to target specific modules.mk 
SVN-Revision: 32861
 2012-07-25 15:50:33 +00:00
Hauke Mehrtens
e0837a51f0 brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first. 
SVN-Revision: 32845
 2012-07-25 14:52:00 +00:00
Hauke Mehrtens
45d55161a6 kernel: bcma: update to version from wireless-testing tag master-2012-07-11 
SVN-Revision: 32670
 2012-07-11 22:17:05 +00:00
Hauke Mehrtens
bd9fa13c73 kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02 
SVN-Revision: 32580
 2012-07-02 23:12:58 +00:00
Felix Fietkau
50958f5e03 kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets 
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk

SVN-Revision: 32395
 2012-06-16 21:06:33 +00:00
John Crispin
a4d96aae8d bump to 3.3.8 
SVN-Revision: 32055
 2012-06-05 06:57:51 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Hauke Mehrtens
c63ef04874 brcm47xx: fix nvram read out on devices with serial flash 
detect nvram on Linksys E3200

SVN-Revision: 31790
 2012-05-18 16:04:10 +00:00
Hauke Mehrtens
7ad663dda6 brcm47xx: bcma: fix null pointer 
SVN-Revision: 31789
 2012-05-18 15:46:30 +00:00
Hauke Mehrtens
b4ecf522cd brcm47xx: ssb: recognize ARM Cortex M3 
SVN-Revision: 31788
 2012-05-18 15:45:51 +00:00
Hauke Mehrtens
7be88d2ad8 brcm47xx: some fixes for the USB driver 
SVN-Revision: 31787
 2012-05-18 15:44:25 +00:00
Hauke Mehrtens
273797f15a kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2 
SVN-Revision: 31772
 2012-05-17 13:22:38 +00:00
Hauke Mehrtens
3491d8c017 brcm47xx: remove support for kernel 3.2 
SVN-Revision: 31771
 2012-05-17 13:20:10 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6 
SVN-Revision: 31709
 2012-05-14 09:18:32 +00:00
Hauke Mehrtens
482b99a660 brcm47xx: generate image for Linksys WRT610N V1 
SVN-Revision: 31696
 2012-05-13 00:16:57 +00:00
Hauke Mehrtens
5acb0b72be brcm47xx: fix tg3 ssb patch 
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).

SVN-Revision: 31694
 2012-05-12 23:59:12 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5 
SVN-Revision: 31645
 2012-05-07 20:11:43 +00:00
Hauke Mehrtens
d30f8da466 brcm47xx: add gpio_request_one() 
This fixes a compile error with kernel 3.3.

SVN-Revision: 31635
 2012-05-06 20:44:37 +00:00
Hauke Mehrtens
8c352ff853 brcm47xx: update target to kernel 3.3 
SVN-Revision: 31599
 2012-05-05 12:53:37 +00:00
Hauke Mehrtens
22b2e3fbb9 brcm47xx: add support for kernel 3.3 
SVN-Revision: 31573
 2012-05-03 20:18:41 +00:00
Hauke Mehrtens
d7b7b99d6e brcm47xx: BCMA - Modified PCI CFG space access 
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.

Thanks Nathan Hintz for the patch

SVN-Revision: 31481
 2012-04-25 20:32:17 +00:00
Hauke Mehrtens
e90d3f1663 brcm47xx: A couple of other (inconsequential) BCMA patches 
Noticed these while reviewing the code.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31471
 2012-04-24 21:56:42 +00:00
Hauke Mehrtens
b07998cf11 brcm47xx: b44 fix workaround detection on some brcm47xx boards 
Because of api change of nvram_getenv, the workaround failed to detect the hardware.

Based on patch by b.sander

Fixes #11268.

SVN-Revision: 31470
 2012-04-24 20:35:46 +00:00
Jonas Gorski
22b4e6b882 kernel: update linux 3.2 to 3.2.16 
SVN-Revision: 31459
 2012-04-24 09:25:35 +00:00
Jonas Gorski
a8f2bc682e kernel: also update the targets to use 3.2.15 
Thanks Gabor for spotting it.

SVN-Revision: 31337
 2012-04-17 13:12:14 +00:00
Jonas Gorski
ee4c47a134 kernel: update linux 3.2 to 3.2.15 
SVN-Revision: 31335
 2012-04-17 12:50:54 +00:00
Hauke Mehrtens
7475bb3dc6 brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs. 
bcma: use fallback sprom if no on chip sprom is available

SVN-Revision: 31285
 2012-04-14 12:12:22 +00:00
Hauke Mehrtens
6af575967c kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing 
SVN-Revision: 31278
 2012-04-13 19:35:40 +00:00
Hauke Mehrtens
c75e700d42 brcm47xx: remove support for kernel 3.0 
SVN-Revision: 31276
 2012-04-13 16:53:16 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14 
SVN-Revision: 31222
 2012-04-09 14:48:51 +00:00
Jonas Gorski
d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches 
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
 2012-04-01 07:56:55 +00:00
Hauke Mehrtens
de0527a354 brcm47xx: fix memory leak, backport from the mainline kernel 
SVN-Revision: 31143
 2012-03-29 15:44:06 +00:00
Hauke Mehrtens
9992ce3a51 brcm47xx: add missing breaks into the nvram read code in the switch case statements 
SVN-Revision: 31142
 2012-03-29 15:43:16 +00:00
Hauke Mehrtens
13b6ec1d05 brcm47xx: update flash drivers 
SVN-Revision: 31126
 2012-03-28 17:03:18 +00:00
Hauke Mehrtens
2f6e19e203 brcm47xx: BCMA - Consolidate/reduce code in bcma_device_name 
Eliminate unneeded procedure by incorporating code into bcma_device_name

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31120
 2012-03-28 09:36:50 +00:00
Hauke Mehrtens
a31a9b8650 brcm47xx: BCMA - Always map 4 bytes 
This probably doesn't matter, but reads/writes are always 4 bytes, so always map 4 bytes.

Changes since v1: Moved changes to new patch file (234-bcma-always-map-4-bytes.patch).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31119
 2012-03-28 09:35:01 +00:00
Hauke Mehrtens
a5abb08100 brcm47xx: update sprom patches like they are in the mainline kernel 
SVN-Revision: 31093
 2012-03-27 17:07:28 +00:00
Hauke Mehrtens
6fd915ba37 brcm47xx: update usb driver to the version send for mainline kernel integartion 
SVN-Revision: 31089
 2012-03-27 15:38:56 +00:00
Gabor Juhos
c1dc6df8bd kernel: update linux 3.2 to 3.2.12 
SVN-Revision: 31028
 2012-03-19 18:23:31 +00:00
Felix Fietkau
db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained 
SVN-Revision: 31015
 2012-03-19 09:58:13 +00:00
Hauke Mehrtens
cee31ca238 brcm47xx: add support for NAND flash on devices using bcma 
This patch add support for the NAND flash on BCM5357 based devices like the WNR3500Lv2.

Thank you Tathagata Das <tathagata@alumnux.com> for the patch

SVN-Revision: 30943
 2012-03-14 22:59:39 +00:00
Hauke Mehrtens
7fee567dc0 brcm47xx: move and rename the patches 
The patches are now grouped by the part what they are doing and are using three digest numbers.

This does not remove or adds anything

SVN-Revision: 30942
 2012-03-14 21:48:23 +00:00
Hauke Mehrtens
067a065305 brcm47xx: make patch apply 
SVN-Revision: 30876
 2012-03-11 13:36:46 +00:00
Hauke Mehrtens
7dcdf69388 brcm47xx: BCMA - Find names of non BCM cores 
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 30875
 2012-03-11 12:55:20 +00:00
Hauke Mehrtens
d6d40b2d60 BCMA - Account for variable PCI memory base/size 
Thank you Nathan Hintz for the patch

SVN-Revision: 30874
 2012-03-11 12:52:43 +00:00
Hauke Mehrtens
bbf739a59f BCMA - Reorder SPROM fill 
The SPROM is initialized in bcm47xx_fill_sprom, so move the call to bcm47xx_fill_sprom_ethernet after it.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 30873
 2012-03-11 11:50:59 +00:00
Gabor Juhos
9698a499b6 kernel: update linux 3.2 to 3.2.9 
SVN-Revision: 30767
 2012-03-01 19:49:02 +00:00
Hauke Mehrtens
12537aa190 brcm47xx: use kernel 3.2 by default 
SVN-Revision: 30751
 2012-02-28 20:12:46 +00:00
Hauke Mehrtens
5dec9dd3b2 brcm47xx: add code to generate images for some netgear devices 
This is commented out until we get report of working devices.

SVN-Revision: 30639
 2012-02-18 23:21:47 +00:00
Hauke Mehrtens
1122b231f9 brcm47xx: sprom for nvram parsing 
This adds support for parsing sprom form nvram for sprom version form 1 to 9.
It also adds sprom from nvram support for devices on the bcma bus.

SVN-Revision: 30638
 2012-02-18 23:08:26 +00:00
Hauke Mehrtens
30408f1cc4 brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed. 
SVN-Revision: 30488
 2012-02-12 22:41:20 +00:00
Hauke Mehrtens
e7bd7f7e85 brcm47xx: activate config bug to show warnings 
SVN-Revision: 30487
 2012-02-12 22:40:01 +00:00
Hauke Mehrtens
fa21aef5ab brcm47xx: refresh patches 
SVN-Revision: 30481
 2012-02-12 16:45:27 +00:00
Hauke Mehrtens
838c363886 brcm47xx: update usb driver for brcm47xx. 
SVN-Revision: 30480
 2012-02-12 16:38:10 +00:00
Hauke Mehrtens
295a154f2f brcm47xx: print the chip id and rev found by ssb and bcma 
SVN-Revision: 30428
 2012-02-10 22:42:43 +00:00
Hauke Mehrtens
4e332227d0 brcm47xx: update bcm5354 support patch 
SVN-Revision: 30423
 2012-02-10 17:22:26 +00:00
Jonas Gorski
e67f4477bb kernel: update linux 3.0 to 3.0.18 
SVN-Revision: 29965
 2012-01-31 09:43:53 +00:00
Hauke Mehrtens
d1c07b3657 brcm47xx: add fix for cardbus host controller 
These devices have two devices on the bus, the host controller itself and the device.

SVN-Revision: 29923
 2012-01-27 20:10:51 +00:00
Hauke Mehrtens
26d4e1876c brcm47xx: add support for pcie host controller on bcma based SoCs. 
This also adds minimal support for the BCMA43224 pcie wireless card.

SVN-Revision: 29843
 2012-01-21 22:39:20 +00:00
Hauke Mehrtens
034cf5643f brcm47xx: add support for kernel 3.2 
SVN-Revision: 29756
 2012-01-15 21:18:34 +00:00
Hauke Mehrtens
c3d134af12 brcm47xx: run kernel_oldconfig 
SVN-Revision: 29755
 2012-01-15 14:53:32 +00:00
Hauke Mehrtens
d5bc3a994b brcm47xx: update usb driver 
Add workarround for BCM5357 and BCM4749.

This patch contains the following fixes from George Kashperko:
* separate subroutines for controller initialization workarounds -
   following CodingStyle recommendations;
* __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG;
* fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being
   kmalloc'ed is never freed anywhere while platform_device_add_resources
   will kmemdup resources right away;
* fix compilation error in ssb_hcd_resume - it will fail as soon as
   CONFIG_PM is selected.

SVN-Revision: 29734
 2012-01-13 20:11:23 +00:00
Jonas Gorski
e49d3e1d5b kernel: update linux 3.0 to 3.0.17 
SVN-Revision: 29725
 2012-01-13 14:10:44 +00:00
Hauke Mehrtens
11125d68ed brcm47xx: fix usb on more recent bcma based devices. 
SVN-Revision: 29605
 2011-12-23 17:21:52 +00:00
Hauke Mehrtens
0cd03df3b1 brcm47xx: remove patch starting adding brcm4716 to ssb 
brcm4716 is supported by bcma now we do not need this patch

SVN-Revision: 29576
 2011-12-19 23:55:20 +00:00
Hauke Mehrtens
5b8686c303 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. 
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

SVN-Revision: 29575
 2011-12-19 23:39:13 +00:00
Hauke Mehrtens
1aa5a61754 kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing 
SVN-Revision: 29574
 2011-12-19 23:33:03 +00:00
Hauke Mehrtens
91d0ef6f19 brcm47xx: remove support for kernel 2.6.39 
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.

SVN-Revision: 29573
 2011-12-19 23:26:15 +00:00
Jonas Gorski
6e2ae90f4a linux: update 3.0 to 3.0.12 
SVN-Revision: 29469
 2011-12-06 19:50:25 +00:00
Jonas Gorski
8bac0df4ae linux: update 3.0 to 3.0.9 
SVN-Revision: 29264
 2011-11-19 18:39:12 +00:00
Jo-Philipp Wich
de7cae82e9 brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit 
SVN-Revision: 28585
 2011-10-25 16:19:52 +00:00
Jo-Philipp Wich
a9e64493d8 target: globally disable BSD process accounting 
SVN-Revision: 28584
 2011-10-25 16:18:36 +00:00
Florian Fainelli
3802769ea1 add vlan definitions for Siemens SE505v2 
Hi,

this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.

It also fixes two whitespace issues.

Tested with brcm47xx on both trunk and backfire branch and works as
expected.

Signed-off-by: Manuel Munz <freifunk@somakoma.de>

SVN-Revision: 28336
 2011-09-30 12:55:33 +00:00
Felix Fietkau
24dfe525c2 brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default 
SVN-Revision: 28125
 2011-08-29 21:23:51 +00:00
Hauke Mehrtens
464539b074 kernel: update to version 3.0.3 
SVN-Revision: 28043
 2011-08-18 12:54:12 +00:00
Jo-Philipp Wich
ebb152295b fix the default network configuration for the ASUS WL-330gE (#8751) 
SVN-Revision: 28024
 2011-08-17 03:16:59 +00:00
Hauke Mehrtens
77218b0338 brcm47xx: fix flash detection on chipcommon less devices. 
This closes #9906
Thank you for the report Kim

SVN-Revision: 27967
 2011-08-12 16:37:22 +00:00
Hauke Mehrtens
51be984655 kernel: update to kernel version 3.0.1 
SVN-Revision: 27918
 2011-08-06 09:51:55 +00:00
Hauke Mehrtens
77966b81d8 brcm47xx: use kernel 3.0 
As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported.

SVN-Revision: 27906
 2011-08-04 20:10:24 +00:00
Hauke Mehrtens
8428ebd8e8 brcm47xx: update patches 
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates

SVN-Revision: 27902
 2011-08-04 20:04:54 +00:00
Hauke Mehrtens
4815eaa4c3 brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci 
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.

SVN-Revision: 27758
 2011-07-24 15:18:29 +00:00
Hauke Mehrtens
49f4d4217e brcm47xx: build bcma into the kernel 
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.

SVN-Revision: 27733
 2011-07-23 11:19:58 +00:00
Hauke Mehrtens
b07b5fc7b6 brcm47xx: remove old kernel versions 
SVN-Revision: 27724
 2011-07-22 18:41:24 +00:00
Hauke Mehrtens
b988168906 brcm47xx: update bcma and ssb to master-2011-07-21 
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus

SVN-Revision: 27723
 2011-07-22 16:30:42 +00:00
Hauke Mehrtens
39f491e479 kernel: update to linux-3.0 and refresh patches. 
Thank you Peter Wagner for the patch

SVN-Revision: 27722
 2011-07-22 16:04:25 +00:00
Hauke Mehrtens
8976fa2622 brcm47xx: deactivate wndr3400 for now as this device will not boot 
SVN-Revision: 27316
 2011-06-29 17:42:34 +00:00
Hauke Mehrtens
8c62c5d109 brcm47xx: generate image to flash on Netgear WNDR3400. 
The image will not boot because serial flash support is missing this is only for experts.

SVN-Revision: 27302
 2011-06-28 22:23:21 +00:00
Hauke Mehrtens
4c18da3df6 brcm47xx: add initial support for devices with bcma bus. 
Ethernet and wifi are not working and this is highly experimental.

SVN-Revision: 27301
 2011-06-28 22:21:57 +00:00
Hauke Mehrtens
3f0eed15a2 kernel: refresh patches for kernel 3.0-rc5 
SVN-Revision: 27300
 2011-06-28 20:25:39 +00:00
Hauke Mehrtens
2af4f6f634 kernel: update ssb and bcma to linux-next next-20110628 
SVN-Revision: 27299
 2011-06-28 19:33:50 +00:00
Hauke Mehrtens
c5821c1a3a kernel: update kernel to 2.6.39.2 
SVN-Revision: 27298
 2011-06-28 19:30:58 +00:00
Hauke Mehrtens
4c392185a6 brcm47xx: update kernel to version 2.6.39 
SVN-Revision: 27296
 2011-06-27 21:29:20 +00:00
Hauke Mehrtens
ca979845cc kernel: update ssb and bcma to linux-next next-20110627 
SVN-Revision: 27295
 2011-06-27 21:28:40 +00:00
Hauke Mehrtens
e439de144f brcm47xx: fix Linux-3.0 and fix clock rate detection. 
SVN-Revision: 27294
 2011-06-27 20:20:11 +00:00
Hauke Mehrtens
47e218c426 brcm47xx: refresh patches 
SVN-Revision: 27219
 2011-06-18 15:53:14 +00:00
Hauke Mehrtens
79a7343560 kernel: update to kernel 2.6.38.8 
SVN-Revision: 27218
 2011-06-18 15:52:15 +00:00
Hauke Mehrtens
75f9e0c615 brcm47xx: add support for kernel 3.0 
SVN-Revision: 27217
 2011-06-18 15:24:44 +00:00
Hauke Mehrtens
bf64ac730a bcm47xx: Remove kernel checks from image Makefile 
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27185
 2011-06-15 21:11:49 +00:00
Hauke Mehrtens
8137e35a5d brcm47xx: initial 2.6.39 support for brcm47xx 
Thank you Peter Wagner for the patch

SVN-Revision: 27008
 2011-05-25 19:27:08 +00:00
Hauke Mehrtens
f5f989e3fb brcm47xx: remove old kernel 
SVN-Revision: 27006
 2011-05-25 18:05:54 +00:00
Hauke Mehrtens
06166b01dd brcm47xx: fix partition layout on SimpleShare devices. 
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.

This fixes #9323

Thank you Will Holmes for the patch.

SVN-Revision: 27005
 2011-05-25 17:46:34 +00:00
Hauke Mehrtens
732abc44cc brcm47xx: update patches 
SVN-Revision: 26846
 2011-05-07 12:49:17 +00:00
Hauke Mehrtens
fcb1557a3e brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. 
SVN-Revision: 26829
 2011-05-05 14:05:21 +00:00
Hauke Mehrtens
54fb8868fa brcm47xx: fix typo in patch 
SVN-Revision: 26828
 2011-05-05 13:18:35 +00:00
Hauke Mehrtens
3dbb8c5088 brcm47xx: add fallback sprom for pci devices without an own sprom. 
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)

SVN-Revision: 26801
 2011-05-01 20:28:35 +00:00
Hauke Mehrtens
8b837430f3 brcm47xx: upgrade to kernel 2.6.27.6. 
This should be save now.

SVN-Revision: 26533
 2011-04-08 15:12:08 +00:00
Hauke Mehrtens
340c6914a3 brcm47xx: add initial support for kernel 2.6.38 
SVN-Revision: 26524
 2011-04-07 21:38:41 +00:00
Hauke Mehrtens
8d75dcb4b8 brcm47xx: remove kmod-usb-ohci from WGT634U packages. 
This package creates some error messages on startup

Thank you russell-- for reporting

SVN-Revision: 26240
 2011-03-19 23:19:08 +00:00
Imre Kaloz
a8d84ae94d remove 2.6.34 support 
SVN-Revision: 26229
 2011-03-18 13:40:48 +00:00
Hauke Mehrtens
537c6017cc brcm47xx: add workaround for fuse again. 
This closes #4754

SVN-Revision: 26141
 2011-03-13 19:25:24 +00:00
Hauke Mehrtens
a08bd03fad ssb: update ssb to version from linux-next-20110311 
SVN-Revision: 26127
 2011-03-13 17:24:28 +00:00
Hauke Mehrtens
4226f1d373 kernel: update to kernel version 2.6.37.3 
SVN-Revision: 26126
 2011-03-13 17:14:08 +00:00
Hauke Mehrtens
425bf41b23 kernel: update to kernel version 2.6.34.8 
SVN-Revision: 26125
 2011-03-13 17:13:11 +00:00
Florian Fainelli
45c9f5e75e update to kernel 2.6.36.4 
SVN-Revision: 25580
 2011-02-19 12:44:07 +00:00
Imre Kaloz
2821101c92 platform specific patches don't belong here - take #2 
SVN-Revision: 25085
 2011-01-24 12:11:25 +00:00
Imre Kaloz
7c9d132d10 platform specific patches don't belong here 
SVN-Revision: 25083
 2011-01-24 11:01:38 +00:00
Gabor Juhos
541bebf4ec brcm47xx: add gpio_set_debounce function 
SVN-Revision: 24968
 2011-01-11 20:05:01 +00:00
Hauke Mehrtens
d6af00c555 brcm47xx: fix compile problem when serial is deactivated. 
Thank you Andrey

SVN-Revision: 24885
 2011-01-02 20:53:09 +00:00
Hauke Mehrtens
acb5e80846 kernel: add config option added in kernel 2.6.37-rc7 to generic and run make kernel_oldconfig for brcm47xx. 
SVN-Revision: 24805
 2010-12-22 19:44:54 +00:00
Hauke Mehrtens
4bee3672dd brcm47xx: refresh patches with kernel 2.6.37-rc7 
The deleted patches went upstream in 2.6.37-rc7

SVN-Revision: 24803
 2010-12-22 19:42:37 +00:00
Hauke Mehrtens
93e09b14eb brcm47xx: wgt634u mac address fix 
The Netgear wgt634u uses minus between the hex digest of the mac
address and all other broadcom devices are using colons between the hex
digest. Now the mac address is correctly parsed also when minus is used.

SVN-Revision: 24749
 2010-12-21 13:34:09 +00:00
Hauke Mehrtens
9daa5485ba brcm47xx: add ssb debug option. 
This fixes a problem with wrt350n.
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"

Thank you sn9 for fixing this problem.

SVN-Revision: 24626
 2010-12-16 19:35:59 +00:00
Hauke Mehrtens
1da5dcbb7a brcm47xx: add some missing pci ID for tg3 driver 
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676

Thank you sn9 for fixing this problem.

SVN-Revision: 24625
 2010-12-16 19:31:05 +00:00
Hauke Mehrtens
c58d8a369c brcm47xx: this patch went upstream 
SVN-Revision: 24624
 2010-12-16 19:26:55 +00:00
Hauke Mehrtens
b8ab3d34eb kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2 
SVN-Revision: 24486
 2010-12-11 16:07:21 +00:00
Hauke Mehrtens
2f7964de3e brcm47xx: do not read from CFE 
SVN-Revision: 24267
 2010-12-05 19:20:26 +00:00
Hauke Mehrtens
852f7b37ed brcm47xx: backport patch from kernel 2.6.37 
Backport patches from r24162
  brcm47xx: reorder patches like they were commitet upstream

SVN-Revision: 24266
 2010-12-05 19:19:50 +00:00
Hauke Mehrtens
7b1ae48645 brcm47xx: use on common files dir 
SVN-Revision: 24264
 2010-12-05 18:34:58 +00:00
Hauke Mehrtens
41b3383499 brcm47xx: Add edimax PS1208mfg support 
Thank you clemvangelis for the patches. (closes #7672)

SVN-Revision: 24217
 2010-12-02 21:27:54 +00:00
Hauke Mehrtens
af2349b4bc brcm47xx: remove support for old kernel versions 
SVN-Revision: 24168
 2010-11-28 14:08:04 +00:00
Hauke Mehrtens
6f58cc20fc brcm47xx: use kernel 2.6.36.1 as new default kernel for this target. 
SVN-Revision: 24167
 2010-11-28 14:05:31 +00:00
Hauke Mehrtens
fb27da9487 brcm47xx: reorder patches like they were commitet upstream 
SVN-Revision: 24162
 2010-11-27 22:47:11 +00:00
Alexandros C. Couloumbis
8f94a9a224 linux/brcm47xx: sync yhe BCM4710 fix with the upcoming upstream patch. 
SVN-Revision: 24116
 2010-11-23 16:41:34 +00:00
Alexandros C. Couloumbis
16dd69760f linux/brcm47xx: add missing patch on r24112 
SVN-Revision: 24113
 2010-11-23 14:12:42 +00:00
Alexandros C. Couloumbis
40b5fad48d linux/brcm47xx: Broadcom BCM4710 does not belong in the BMIPS4KC family. 
SVN-Revision: 24112
 2010-11-23 14:08:41 +00:00
Alexandros C. Couloumbis
26df9231fa linux/brcm47xx: properly fix r24096 
SVN-Revision: 24102
 2010-11-22 18:16:55 +00:00
Alexandros C. Couloumbis
aab31771f8 linux/brcm47xx: mainline 2.6.37 602977b0d672687909b0cb0542ede134ed6ef858 commit broke CPU revision: 00024000, MIPS (cc 0x805, rev 0x00, vendor 0x4243) functionality. Revert that patch until we get a proper fix. 
SVN-Revision: 24096
 2010-11-22 17:17:15 +00:00
Alexandros C. Couloumbis
18dd104885 linux/brcm47xx: include a missing 2.6.37 file (thank you hauke) 
SVN-Revision: 23955
 2010-11-11 08:49:52 +00:00
Hauke Mehrtens
ce547cf748 brcm47xx: missing in r23949 
SVN-Revision: 23950
 2010-11-10 19:12:49 +00:00
Hauke Mehrtens
1652eb7863 brcm47xx: CONFIG_HAMRADIO=n makes no sense 
SVN-Revision: 23949
 2010-11-10 19:11:24 +00:00
Alexandros C. Couloumbis
f950840ec9 linux/brcm47xx: add preliminary 2.6.37 kernel support 
SVN-Revision: 23945
 2010-11-10 19:01:07 +00:00
Hauke Mehrtens
4e797b6278 brcm47xx: Fix boot problem with wgt634u. 
Readd the workarround from the old version again which was removed in r22296 and refresh the patches.

This should close #7874

Thank you Russell Senior for testing.

SVN-Revision: 23911
 2010-11-07 13:44:48 +00:00
Florian Fainelli
cb0e742bab Revert "[brcm47xx] Add support for cores with slow WDT clock (bcm5354)" 
This reverts commit 7467fdab387f451082c15d17ce9ae4d91d74b6ca.

SVN-Revision: 23533
 2010-10-19 07:07:10 +00:00
Florian Fainelli
c8c0d4d8e6 Add support for cores with slow WDT clock (bcm5354) 
Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs>

SVN-Revision: 23516
 2010-10-18 19:49:48 +00:00
Alexandros C. Couloumbis
9cb3333c0d linux/brcm47xx: fix an initialization issue on 2.6.36 kernel 
SVN-Revision: 23392
 2010-10-11 12:37:16 +00:00
Hauke Mehrtens
badd8ffee3 brcm47xx: add patches for kernel 2.6.36 
SVN-Revision: 23278
 2010-10-06 20:11:03 +00:00
Imre Kaloz
5f9a6a5431 upgrade kernel versions to the latest stable ones 
SVN-Revision: 23219
 2010-10-04 10:40:41 +00:00
Florian Fainelli
69120f3f47 update to 2.6.34.5 
SVN-Revision: 22768
 2010-08-22 17:08:37 +00:00
Hauke Mehrtens
09e05d833d kernel: update kernel version to 2.6.34.5 
SVN-Revision: 22759
 2010-08-22 13:26:06 +00:00
Hauke Mehrtens
26f323dcf5 brcm47xx: do not read out cfe 
Reading the CFE properties causes system hangs on some devices. With
this patch nvram read will be successful very time so cfe will no be
read out. This code is not really correct but it will work around some
problems for some people.

Related ticket: #7693

SVN-Revision: 22663
 2010-08-15 18:23:17 +00:00
Alexandros C. Couloumbis
0780aa2278 brcm47xx/patches-2.6.35: Allow SSB EHCI/OHCI drivers to co-exist (thank you Steve Brown) 
SVN-Revision: 22661
 2010-08-15 16:30:00 +00:00
Hauke Mehrtens
09244c0811 brcm47xx: do not generate image for wgr614_v8 as long as we did not get any positive reports with that device. 
SVN-Revision: 22522
 2010-08-06 22:50:58 +00:00
Hauke Mehrtens
7640f89045 brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2 
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/

This closes #7702.

SVN-Revision: 22516
 2010-08-06 20:21:32 +00:00
Hauke Mehrtens
86b209211e brcm47xx: ignore some parts of flash on some netgear devices. This space is used to store config values. When overwriting it the device will not start any more. 
closes #7630

Thank you realopty for testing.

SVN-Revision: 22475
 2010-08-03 20:35:53 +00:00
Hauke Mehrtens
3aca383c72 brcm47xx: some checkpatch fixes 
SVN-Revision: 22425
 2010-07-31 10:06:05 +00:00
Hauke Mehrtens
96911f6b58 brcm47xx: some fixes 
* fix return codes of nvram_getenv. Now it behaves like cfe_getenv.
* also check cfe for kernel_args param.
* some style fixes

SVN-Revision: 22424
 2010-07-31 10:05:29 +00:00
Hauke Mehrtens
da7493d8f9 mostly revert commit r22396 
CFE does not boot images generated with these checksums because of
wrong checksum.

After flashing then with tftp to my Asus wl500-GPv1 the following messages
are show:
Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)

SVN-Revision: 22418
 2010-07-30 21:19:49 +00:00
Markus Wigge
7a052dc799 fix CRC32 calculation for sysupgrade 
* reduce image size for CRC calculation by fs_mark size

sysupgrade sometimes failed for me and I noticed that it was due
to incorrect CRC values in trx-header after performing it.
It seems that the fs_mark was completely included in the calculation
and that it was nevertheless modified by sysupgrade while appending
the jffs data.
This only occurs for the first boot after sysupgrade as the flashmap
driver recalculates the CRC to an even smaller area when it boots.

SVN-Revision: 22396
 2010-07-27 15:37:37 +00:00
Hauke Mehrtens
763e011e70 brcm47xx: now hopfully realy commit the right things from r22385 
SVN-Revision: 22388
 2010-07-25 16:10:51 +00:00
Hauke Mehrtens
d67c25f592 brcm47xx: add missing part from r22385 
SVN-Revision: 22387
 2010-07-25 16:07:40 +00:00
Hauke Mehrtens
163b24d092 brcm47xx: fill the whole sprom with data 
SVN-Revision: 22385
 2010-07-24 23:25:06 +00:00
Hauke Mehrtens
ebeaea35fd brcm47xx: fix for boardflags by xMff and checkpatch.pl fixes 
SVN-Revision: 22318
 2010-07-20 19:41:17 +00:00
Hauke Mehrtens
c811398d00 brcm47xx: write boardflags correct into sprom 
SVN-Revision: 22298
 2010-07-19 21:45:29 +00:00
Hauke Mehrtens
49edb3c342 brcm47xx: prepare brcm47xx patches for sending to mainline. 
SVN-Revision: 22296
 2010-07-19 20:25:20 +00:00
Hauke Mehrtens
0799e77a8b brcm47xx: remove kernel 2.6.33 
SVN-Revision: 22295
 2010-07-19 20:07:24 +00:00
Hauke Mehrtens
2d87b1c1ee brcm47xx: activate swap again and run make oldconfig 
SVN-Revision: 22266
 2010-07-17 20:01:46 +00:00
Daniel Dickinson
17ba48cd90 target (base-files): Fixed failsafe mode by adding back insmod diag 
SVN-Revision: 22186
 2010-07-15 02:46:03 +00:00
Hauke Mehrtens
3310fdf6fa brcm47xx: use kernel 2.6.34.1 as default kernel 
SVN-Revision: 22119
 2010-07-10 22:40:45 +00:00
Felix Fietkau
9c8d55541a brcm47xx: fix a small copy&paste error in the b44 fix for 2.6.34 and 2.6.35 
SVN-Revision: 22116
 2010-07-10 12:17:41 +00:00
Felix Fietkau
fbff44c98a Get rid of the b44 'BUG! Timeout waiting for bit 80000000 of register 428 to clear.' spam. 
more and more users are getting confused by this, and consider it a regression in brcm47xx,
because brcm-2.4 was not showing this message. It's not particularly interesting for debugging,
most of the time it only happens because of an unconnected port.

SVN-Revision: 22110
 2010-07-10 00:48:37 +00:00
Markus Wigge
25602743d1 brcm47xx: added dual image support to flashmap driver 
some CFE versions (i.e. WRT54G3Gv2-VF) expect two separate firmware
images which each consume half of the available flash space.
these changes check for the TRX header version and set the partition
size correctly.
Tested on G3Gv2-VF and Asus WL-500GP

SVN-Revision: 22019
 2010-07-01 16:26:24 +00:00
Markus Wigge
114ce0bd4c renamed wrt54g3gv2-vf images 
'factory' and 'sysupgrade' did not make much sense. A discussion
with jow convinced me that .trx results in a helpdesk disaster.
So I decided to use '.bin' for normal bin-headers and '.noheader.bin'
for the trx-v2 image.
I fixed the wiki accordingly.

SVN-Revision: 22013
 2010-07-01 10:48:13 +00:00
Alexandros C. Couloumbis
0409c64e34 fix commit r21993 
SVN-Revision: 21994
 2010-06-30 19:35:12 +00:00
Felix Fietkau
812f026323 add back the base-files/image code from brcm-2.4 to brcm47xx 
SVN-Revision: 21945
 2010-06-26 20:41:49 +00:00
Felix Fietkau
519b6a2f4c remove brcm47xx symlinks to brcm-2.4 (unfortunately svn does not allow a proper type changing commit) 
SVN-Revision: 21944
 2010-06-26 20:41:40 +00:00
Jo-Philipp Wich
5181a82334 change a typo in ath5k profile 
SVN-Revision: 21853
 2010-06-20 13:46:24 +00:00
Jo-Philipp Wich
af1eb7ec46 deselect wpad-mini in wl profile instead of adding it to all other profiles, slightly change titles 
SVN-Revision: 21852
 2010-06-20 13:44:19 +00:00
Jo-Philipp Wich
da6e39e592 add a profile using proprietary wl instead of b43 
SVN-Revision: 21851
 2010-06-20 13:32:40 +00:00
Felix Fietkau
efa4f94436 brcm47xx: add some exports to be used by the new wl driver 
SVN-Revision: 21793
 2010-06-14 10:03:05 +00:00
Gabor Juhos
9bc1e548a1 generic: move more common options to generic configuration 
* CONFIG_ABX500_CORE
 * CONFIG_ATOMIC64_SELFTEST
 * CONFIG_BRIDGE_IGMP_SNOOPING
 * CONFIG_CAIF
 * CONFIG_CEPH_FS
 * CONFIG_CRYSTALHD
 * CONFIG_DEFAULT_SECURITY_SELINUX
 * CONFIG_DEFAULT_SECURITY_SMACK
 * CONFIG_DEFAULT_SECURITY_TOMOYO
 * CONFIG_DT3155
 * CONFIG_IP_MROUTE_MULTIPLE_TABLES
 * CONFIG_L2TP
 * CONFIG_LOGFS
 * CONFIG_LPC_SCH
 * CONFIG_MFD_JANZ_CMODIO
 * CONFIG_MFD_RDC321X
 * CONFIG_N_GSM
 * CONFIG_RAMOOPS
 * CONFIG_SERIAL_ALTERA_JTAGUART
 * CONFIG_SERIAL_ALTERA_UART
 * CONFIG_SERIAL_TIMBERDALE
 * CONFIG_SM_FTL
 * CONFIG_SQUASHFS_XATTRS

SVN-Revision: 21750
 2010-06-10 10:45:51 +00:00
Gabor Juhos
4128c72275 generic: don't override CONFIG_DEBUG_FS 
SVN-Revision: 21749
 2010-06-10 10:45:42 +00:00
Gabor Juhos
2f328ce488 generic: move some common symbols to generic configuration 
* CONFIG_MUTEX_SPIN_ON_OWNER
 * CONFIG_DEFAULT_HYDLA
 * CONFIG_DEFAULT_VENO

SVN-Revision: 21748
 2010-06-10 08:58:14 +00:00
Gabor Juhos
57c5fe2e7f generic: remove trailing whitespaces from kernel configs 
SVN-Revision: 21747
 2010-06-10 08:58:09 +00:00
Gabor Juhos
5cad9d5c73 generic: standardize CONFIG_INLINE_* symbols usage 
SVN-Revision: 21746
 2010-06-10 08:09:41 +00:00
Alexandros C. Couloumbis
cfa9a1f6d6 brcm47xx: add kernel 2.6.35 preliminary support 
SVN-Revision: 21707
 2010-06-08 16:58:06 +00:00
Nicolas Thill
e74e289fa8 update linux kernel to 2.6.32.14 
SVN-Revision: 21583
 2010-05-27 18:09:09 +00:00
Hauke Mehrtens
7800ac4e58 brcm47xx: refresh patches 
SVN-Revision: 21543
 2010-05-23 13:17:56 +00:00
Hauke Mehrtens
b18a1d217b kernel: update kernel to version 2.6.32.13 and 2.6.33.4 
SVN-Revision: 21540
 2010-05-23 13:16:51 +00:00
Lars-Peter Clausen
37a8f3522f Move CONFIG_LZMA_{DE,}COMPRESS to generic config 
It is selected by CONFIG_JFFS2_LZMA which is set in the generic config.

SVN-Revision: 21437
 2010-05-12 23:04:18 +00:00
Hauke Mehrtens
c96049615c brcm47xx: use tab instead of space 
SVN-Revision: 21430
 2010-05-12 20:28:39 +00:00
Hauke Mehrtens
bb8d84ce4e brcm47xx: ehci-ssb: some updates: * update pointers in struct hc_driver * make ssb_ehci_detach more look like the pci version * remove resume and suspend as they are never activated and not compiling * replace ssb_ehci_start with ehci_run as it only calls this method 
SVN-Revision: 21427
 2010-05-12 18:28:41 +00:00
Felix Fietkau
0f7864456a brcm47xx: adjust the brcm4710 cache workaround code so that it does not break bcm4716 (patch by Bernhard Loos) 
SVN-Revision: 21395
 2010-05-07 11:48:15 +00:00
Felix Fietkau
3ea657a3e9 kernel: bring ssb in sync with upstream (as of current wireless-testing) 
SVN-Revision: 21269
 2010-04-30 15:53:08 +00:00
Alexandros C. Couloumbis
09a1db3eea brcm47xx: update config-2.6.33 options 
SVN-Revision: 21266
 2010-04-30 11:10:04 +00:00
Alexandros C. Couloumbis
6a40947c31 brcm47xx: refresh 2.6.33 kernel patches 
SVN-Revision: 21265
 2010-04-30 11:05:40 +00:00
Alexandros C. Couloumbis
fdac9ae836 sync to kernel 2.6.32.12 
SVN-Revision: 21195
 2010-04-27 14:30:08 +00:00
Alexandros C. Couloumbis
b7e21c6517 brcm47xx: add missing bits & bytes on r21119 
SVN-Revision: 21145
 2010-04-24 19:23:54 +00:00
Alexandros C. Couloumbis
d0883b82a4 brcm47xx: add sysfs attributes to ssb devices & new defines for registers and device ids (credits: Bernhard Loos) 
SVN-Revision: 21119
 2010-04-24 06:54:17 +00:00
Alexandros C. Couloumbis
819114e3f2 brcm47xx: fix phy isolation bit on Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W and alike boards (closes #6789) 
SVN-Revision: 21108
 2010-04-23 11:49:27 +00:00
Gabor Juhos
4be3c3e48c kernel: refresh patches for 2.6.34-rc5 and update md5sum 
SVN-Revision: 21082
 2010-04-22 07:13:21 +00:00
Alexandros C. Couloumbis
bf12a75a87 brcm47xx: fix r21042, nuke (boardnum == 42 section) 
SVN-Revision: 21047
 2010-04-20 16:23:47 +00:00
Alexandros C. Couloumbis
bd97e88167 brcm47xx: fix ethernet link state (closes #7056) 
SVN-Revision: 21042
 2010-04-20 15:03:22 +00:00
Hauke Mehrtens
fa432efa8e brcm47xx: allow isdn on brcm47xx 
SVN-Revision: 21001
 2010-04-18 19:32:18 +00:00
Hauke Mehrtens
79075b8d13 brcm47xx: refresh patches 
SVN-Revision: 20996
 2010-04-18 18:22:50 +00:00
Hauke Mehrtens
03fd014069 brcm47xx: fix build of tg3 for kernel 2.6.34 
SVN-Revision: 20994
 2010-04-18 17:19:39 +00:00
Alexandros C. Couloumbis
e712ef386e brcm47xx: fix ide drive assignment (closes #7061) 
SVN-Revision: 20924
 2010-04-16 15:05:32 +00:00
Alexandros C. Couloumbis
598e0656c5 brcm47xx: add preliminary 2.6.34 support 
SVN-Revision: 20888
 2010-04-15 20:50:50 +00:00
Hauke Mehrtens
0490c57e31 brcm47xx: remove support for older for kernel 
SVN-Revision: 20492
 2010-03-26 19:53:30 +00:00