ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 17:18:59 +00:00
Code Issues Actions 9 Packages Projects Releases Wiki Activity
28,761 Commits 10 Branches 76 Tags 924 MiB
5fa47c3c04
Commit Graph

1009 Commits

Author SHA1 Message Date
Gabor Juhos
aedf05caa0 ramips: remove trailing whitespaces from dts files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36246
 2013-04-07 13:32:37 +00:00
Gabor Juhos
017aabe292 ramips: handle PCI interrupts in plat_irq_dispatch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36245
 2013-04-07 13:25:38 +00:00
John Crispin
811f7f9f2d fix typos inside dts files 
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

SVN-Revision: 36244
 2013-04-07 11:47:03 +00:00
John Crispin
709b19ed9f fix default commandline in dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36243
 2013-04-07 11:46:54 +00:00
Gabor Juhos
85675528da ramips: add cfi_cmdset_0002 patches 
The parallel flash access on the RT-N56U is broken
without those patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36242
 2013-04-07 11:37:15 +00:00
Gabor Juhos
10d8e4b66c ramips: remove top-level {address,size}-cells properties from .dts files 
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36237
 2013-04-07 08:19:10 +00:00
Gabor Juhos
756b810178 ramips: fix ethernet switch node in DIR-645.dts 
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36231
 2013-04-06 17:19:35 +00:00
Gabor Juhos
1ef39b43dd ramips: remove spi node from RTN56.dts 
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
 2013-04-06 12:37:40 +00:00
Gabor Juhos
d57e662cda ramips: fix ethernet switch node in RTN56U.dts 
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
 2013-04-06 12:37:38 +00:00
Gabor Juhos
4becd8590c ramips: rt3883: enable the RTL8367 driver 
That is needed by the Asus RT-N56U board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36221
 2013-04-06 12:37:37 +00:00
Gabor Juhos
348640f4b3 ramips: rt3883: sync 3.8 config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36217
 2013-04-06 12:37:31 +00:00
John Crispin
d16de0b69f fix typo pinmmux -> pinmux 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
 2013-04-06 11:46:34 +00:00
Gabor Juhos
f78c902cfd kernel: update linux 3.8 to 3.8.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
 2013-04-06 11:40:44 +00:00
John Crispin
df7af06f1f fix dir-615 h1 network config 
http://patchwork.openwrt.org/patch/3527/

Signed-off-by: Daniel Petre <dani@ip6.ro>

SVN-Revision: 36213
 2013-04-05 23:37:45 +00:00
John Crispin
e1a74d8ff7 fix typo that made gpiomuxing fail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
 2013-04-05 23:10:42 +00:00
John Crispin
93899a1329 add profile for tenda w150m board 
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

SVN-Revision: 36176
 2013-04-03 10:00:21 +00:00
John Crispin
7e54357bd5 fix ALL5002 default package selection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36175
 2013-04-03 10:00:16 +00:00
John Crispin
37401dca92 Build WW factory image for DAP-1350 
http://patchwork.openwrt.org/patch/3466/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36174
 2013-04-03 10:00:12 +00:00
John Crispin
910b705155 add Huawei D105 
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173
 2013-04-03 10:00:08 +00:00
John Crispin
c1710901c5 add profile for the Edimax 3g-6200NL board 
http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172
 2013-04-03 10:00:03 +00:00
John Crispin
f3643374c4 there is no ttyS1 console 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36171
 2013-04-03 09:59:59 +00:00
John Crispin
99e0ff1123 make v3.8 the default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36170
 2013-04-03 09:59:55 +00:00
John Crispin
c8d5f5e0ef add new image/Makefile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36169
 2013-04-03 09:59:51 +00:00
John Crispin
770b28f146 add the dts files that describe the boards in future 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36168
 2013-04-03 09:59:46 +00:00
John Crispin
2328e8389e fix upvel profile names 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36167
 2013-04-03 09:59:41 +00:00
John Crispin
94972a5268 fix rt3883 config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36166
 2013-04-03 09:59:37 +00:00
John Crispin
0716ae8abe fix rt305x config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36165
 2013-04-03 09:59:33 +00:00
John Crispin
dce4945972 mark rt288x broken until the test hardware arrives in the mail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36164
 2013-04-03 09:59:16 +00:00
John Crispin
46f141637c add patches for v3.8 
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36163
 2013-04-03 09:59:10 +00:00
John Crispin
4f86ea43ca remove old ralink 3.8 patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36162
 2013-04-03 09:58:48 +00:00
John Crispin
d4db00205d move files to files-3.7 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36161
 2013-04-03 09:58:44 +00:00
John Crispin
86a691144b add feature gpio 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36160
 2013-04-03 09:58:37 +00:00
Gabor Juhos
07532dca7f kernel: update linux 3.8 to 3.8.3 
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
 2013-03-15 14:39:51 +00:00
John Crispin
b22cbac68f make sure errors get sent to /dev/null 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35988
 2013-03-12 13:52:40 +00:00
Gabor Juhos
fe3df4b593 ramips: add profile and build image for the Upvel UR-326N4G board 
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35972
 2013-03-11 21:02:45 +00:00
Gabor Juhos
d543f4b771 ramips: add user-space support for the Upvel UR-326N4G board 
[juhosg: fix mac address setup]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35971
 2013-03-11 21:02:43 +00:00
Gabor Juhos
3c2ef04a0e ramips: add kernel support for the Upvel UR-326N4G board 
[juhosg: add missing symbols to config-3.{7,8}]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35970
 2013-03-11 21:02:40 +00:00
Gabor Juhos
23b3b3a194 kernel: update linux 3.7 to 3.7.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
 2013-03-03 13:57:40 +00:00
Gabor Juhos
8798c73860 ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension 
All known rt305x and rt3883 implementations support at
least the 24kec instruction set which includes the DSP
extension. For rt288x, the previous value mips32r2 is
kept.

The cpu target is now set per sub-archtecture, according
to cpu-feature-overrides.h of each SoC family.

[juhosg: define ARCH_PACKAGES variable for rt305x/rt3883
in order to differentiate the packages compiled with
the 24Kec option.]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35853
 2013-03-03 12:47:31 +00:00
Gabor Juhos
59ad675ef1 ramips: add user-space detection for ALL5002/ALL5003 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35852
 2013-03-03 12:47:28 +00:00
Gabor Juhos
50e51e5ecc ramips: indicate support for ALL5003 
add ALL5003 to board description in mach-all5002.c
adapt detection in user-space accordingly
(no functional changes)

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35851
 2013-03-03 12:47:25 +00:00
Gabor Juhos
367ab0a40f ramips: enhance user-space board detection 
Similar to ar71xx, detect only once and cache the strings in
/tmp/sysinfo/model and /tmp/sysinfo/boardname.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35850
 2013-03-03 12:47:02 +00:00
Gabor Juhos
1ba2272ca5 ramips: fix whitespace in /lib/ramips.sh 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35849
 2013-03-03 12:46:08 +00:00
Gabor Juhos
5412b6f32e ramips: add support for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35801
 2013-02-25 21:28:42 +00:00
Gabor Juhos
a08646642e ramips: image: don't break make process if mkimage command fails 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35800
 2013-02-25 21:28:40 +00:00
Gabor Juhos
275db5b4c4 ramips: remove port_power_off field from ehci_platform_data 
It is removed in 3.8. Also add a revert patch for 3.7.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35799
 2013-02-25 21:28:38 +00:00
Gabor Juhos
5e1d6ce077 ramips: remove __dev_{init,exit} annotations 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35798
 2013-02-25 21:28:34 +00:00
Jonas Gorski
1cd62d06ca ramips: print image build warnings/errors to stderr 
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35721
 2013-02-21 11:45:33 +00:00
Gabor Juhos
90011a99f3 ramips: migrate to common led helper functions 
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35652
 2013-02-18 09:56:29 +00:00
Gabor Juhos
3f749d1e8e kernel: update linux 3.7 to 3.7.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
 2013-02-17 21:32:42 +00:00
Gabor Juhos
4375dae6d3 ramips: fix kmod-usb2 package name 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35628
 2013-02-16 17:26:52 +00:00
Gabor Juhos
7fd8525853 ramips: use the new macaddr_* helpers instead of maccalc 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35615
 2013-02-16 11:50:25 +00:00
Gabor Juhos
753d713e92 ramips: use the mtd_get_mac_* helpers 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35613
 2013-02-16 11:50:21 +00:00
Gabor Juhos
162b8e23a5 kernel: update linux 3.7 to 3.7.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
 2013-02-15 07:36:15 +00:00
Gabor Juhos
bae4bfe3f8 kernel: update linux 3.7 to 3.7.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
 2013-02-12 09:51:11 +00:00
Gabor Juhos
08ff976720 kernel: update linux 3.7 to 3.7.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
 2013-02-04 10:02:56 +00:00
Gabor Juhos
9ed81a91f3 ramips: build image for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35468
 2013-02-02 17:21:06 +00:00
Gabor Juhos
813aec6796 ramips: add user-space support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35467
 2013-02-02 17:21:05 +00:00
Gabor Juhos
d578f3ac38 ramips: rt3883: add kernel support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35466
 2013-02-02 17:21:01 +00:00
Gabor Juhos
b99b2ff553 ramips: add userspace support for the Edimax BR-6425 
[juhosg: remove sysupgrade changes]

Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35463
 2013-02-02 17:01:50 +00:00
Gabor Juhos
0a42e38bad ramips: add kernel support for the Edimax BR-6425 board 
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35462
 2013-02-02 17:01:47 +00:00
Gabor Juhos
fb2e2a56d7 refresh kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35434
 2013-02-01 17:28:40 +00:00
Gabor Juhos
562ba537fc kernel: update linux 3.7 to 3.7.5 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
 2013-01-29 18:29:45 +00:00
John Crispin
756a7c5451 fix for non-blinking LAN LEDs 
https://dev.openwrt.org/ticket/12830

SVN-Revision: 35359
 2013-01-28 18:06:31 +00:00
John Crispin
d93706154b ramips: reset switch on single-port devices 
Signed-off-by: Daniel Gole <dgolle@allnet.de>

SVN-Revision: 35356
 2013-01-28 17:44:41 +00:00
Gabor Juhos
15be1c9ee7 kernel: update linux 3.7 to 3.7.4 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
 2013-01-24 17:08:37 +00:00
Gabor Juhos
ed6d399f8d ramips: add profile and build image for the Tenda 3G300M 
Factory image should be used to flash from
original firmware.

[juhosg: use the GENERIC_4M template]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35246
 2013-01-19 17:05:07 +00:00
Gabor Juhos
9891603eb5 ramips: add user-space support for the Tenda 3G300M 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35245
 2013-01-19 17:05:06 +00:00
Gabor Juhos
7eff5d2df0 ramips: add kernel support for the Tenda 3G300M 
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35244
 2013-01-19 17:05:03 +00:00
Gabor Juhos
f7a943694f ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0 
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.

Compile-tested, the generated files inspected with "file" utility.

[juhosg:
 - keep the factory.bin images to avoid users confusion,
 - use GENERIC_4M template for the W306R V2.0
 - update commit log]

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35243
 2013-01-19 15:36:13 +00:00
Gabor Juhos
6aebe6a65d ramips: allow to override image name/suffix in GENERIC_{4,8}M macros 
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35242
 2013-01-19 15:36:11 +00:00
Gabor Juhos
60dde219d4 ramips: do not stop the build if some targets fail 
This becomes crucial when you are using a generic profile to build an image
larger than 4M, e.g. for w502u.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35238
 2013-01-19 08:51:45 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution 
SVN-Revision: 35217
 2013-01-18 12:42:53 +00:00
Gabor Juhos
0de21d9747 kernel: update linux 3.7 to 3.7.3 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
 2013-01-18 11:44:42 +00:00
Felix Fietkau
576aa2af0c ramips: enable BR6425N in kernel config 
Though originally contained in the patch applied in r35020, the move to 3.7 in
r34845 lost the kernel .config option. Reintroduce it to config-3.7.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35191
 2013-01-17 09:39:44 +00:00
Gabor Juhos
ff2ce330a5 ramips: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35110
 2013-01-12 12:25:30 +00:00
Gabor Juhos
d53f8c3ded ramips: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35109
 2013-01-12 12:25:28 +00:00
John Crispin
f2f9332350 adds support for Edimax BR-6524N 
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35020
 2013-01-06 11:11:42 +00:00
John Crispin
569bbe4970 rt5350 switch support fix 
RT5350 frame engine need reset frame engine and embedded switch together.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 34969
 2013-01-02 11:28:21 +00:00
Gabor Juhos
fb07876f25 ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34934
 2012-12-30 08:23:48 +00:00
Gabor Juhos
6708d68c24 ramips: build firmware image for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34927
 2012-12-29 17:50:40 +00:00
Gabor Juhos
8b1ac2ae37 ramips: add user-space support for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926
 2012-12-29 17:50:38 +00:00
Gabor Juhos
d6d06aceb0 ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router 
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34925
 2012-12-29 17:50:35 +00:00
Gabor Juhos
76537041eb ramips: build image for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34924
 2012-12-29 17:50:34 +00:00
Gabor Juhos
3aad9b4c9b ramips: add user-space support for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34923
 2012-12-29 17:50:32 +00:00
Gabor Juhos
3fcb8bb0dd ramips: rt305x: add kernel support for AirLive AIR3GII 
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34922
 2012-12-29 17:50:28 +00:00
Felix Fietkau
41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration 
SVN-Revision: 34909
 2012-12-28 19:17:19 +00:00
Gabor Juhos
69da894432 ramips: fix ASUS WL-330N3G MAC address 
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34877
 2012-12-24 06:52:41 +00:00
Gabor Juhos
c5a36f13f0 ramips: fix wifi EEPROM extraction on DIR-615-Dx models 
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34876
 2012-12-24 06:52:38 +00:00
Gabor Juhos
8105c6badd ramips: unify eeprom file name for the built-in wireless MAC 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34860
 2012-12-22 16:09:03 +00:00
Gabor Juhos
c81b4475c9 ramips: rt3883: fix build error 
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34859
 2012-12-22 13:50:47 +00:00
Gabor Juhos
b44cdcde8e ramips: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34845
 2012-12-22 12:11:13 +00:00
Gabor Juhos
b81667cb23 ramips: convert to use {e,o}hci-platform driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34843
 2012-12-22 12:11:08 +00:00
Gabor Juhos
e1b5eeeaa4 ramips: Add USB support for DAP-1350 platform. 
It seems to work as intended, but only lightly tested.

Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>

SVN-Revision: 34811
 2012-12-20 19:17:17 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) 
SVN-Revision: 34793
 2012-12-19 16:07:50 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
 2012-12-18 14:41:16 +00:00
Gabor Juhos
fe8efb72ca ramips: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34744
 2012-12-17 22:28:11 +00:00
Gabor Juhos
2b378d11c8 kernel: update linux 3.6 to 3.6.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
 2012-12-11 20:14:39 +00:00
John Crispin
c2ae0ec02a add support for Hauppauge Broadway 
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform.  It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>

SVN-Revision: 34595
 2012-12-10 14:13:01 +00:00
Gabor Juhos
2581173660 kernel: update linux 3.6 to 3.6.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
 2012-12-08 15:01:33 +00:00
Gabor Juhos
e0e43655ce ramips: fix serial console for Belkin F5D8235 v1/v2 
Based on a patch from #12533.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34445
 2012-12-02 14:16:12 +00:00
Gabor Juhos
44131bd785 ramips: rt305x: add profile and build image for the Asus RT-N13U 
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34407
 2012-11-29 17:37:14 +00:00
Gabor Juhos
d3994b7408 ramips: rt305x: add user-space support for the Asus RT-N13U 
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34406
 2012-11-29 17:37:13 +00:00
Gabor Juhos
0ec59e6235 ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router 
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.

* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c

[juhosg: move user-space support and image generation into separate
patches]

Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34405
 2012-11-29 17:37:11 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
 2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8 
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
 2012-11-29 07:42:19 +00:00
Gabor Juhos
57b7879a4e ramips: ramips_eth: use Kconfig definition to enable debug 
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34332
 2012-11-25 14:25:54 +00:00
Gabor Juhos
21d5df8700 ramips: add DIR-615 D userspace support 
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.

An IRC user reported these changes allowed him to use wifi on his hardware.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34331
 2012-11-25 14:25:27 +00:00
Gabor Juhos
dd092fd10c ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34270
 2012-11-20 07:19:10 +00:00
Gabor Juhos
ff1e854511 kernel: update linux 3.6 to 3.6.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
 2012-11-18 08:41:31 +00:00
John Crispin
dd8c625424 previous commit pushed 1 file too many ;) 
SVN-Revision: 34179
 2012-11-12 21:36:23 +00:00
John Crispin
ced0cf3a94 move ethernet hw init to init/uninit functions 
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.

SVN-Revision: 34177
 2012-11-12 21:35:01 +00:00
John Crispin
6090ddc896 adds fon20n profile 
SVN-Revision: 34112
 2012-11-07 20:26:31 +00:00
John Crispin
3991526989 ramips: use kernel 3.6.6 
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

SVN-Revision: 34111
 2012-11-07 20:26:21 +00:00
John Crispin
480892226d ramips: add HAVE_CLK to Kconfig on all ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34110
 2012-11-07 20:26:04 +00:00
John Crispin
feb31be6af ramips: add linux-3.6 configuration for ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

SVN-Revision: 34109
 2012-11-07 20:25:55 +00:00
John Crispin
ca1fcaed5b ramips: port patches to linux-3.6 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

SVN-Revision: 34108
 2012-11-07 20:25:34 +00:00
Gabor Juhos
a0dd47bbed ramips: enable USB power on the DIR-645 
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
 2012-11-05 11:04:45 +00:00
Gabor Juhos
829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
 2012-11-05 06:58:53 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
 2012-10-29 10:11:05 +00:00
Gabor Juhos
db5eea6acd ramips: use correct key code for the RFKILL switch on the TEW-691GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33943
 2012-10-26 18:53:44 +00:00
Gabor Juhos
b530d9d2b3 ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33864
 2012-10-19 17:42:22 +00:00
Gabor Juhos
6ca2970e4b ramips: add profile and build image for the TEW-691GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33852
 2012-10-18 07:23:13 +00:00
Gabor Juhos
21180e29f7 ramips: add user-space support for TEW-691GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33851
 2012-10-18 07:23:12 +00:00
Gabor Juhos
25d53c4c28 ramips: rt3883: add initial support for the TRENDnet TEW-691GR board 
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33850
 2012-10-18 07:23:11 +00:00
Gabor Juhos
462a53c367 ramips: add profile and build image for the TEW-692GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33849
 2012-10-18 07:23:10 +00:00
Gabor Juhos
d3c368c324 ramips: add user-space support for the TEW-692GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33847
 2012-10-18 07:23:07 +00:00
Gabor Juhos
7f8b7207c9 ramips: rt3883: add initial support for TRENDnet TEW-692GR board 
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33846
 2012-10-18 07:23:06 +00:00
Gabor Juhos
bf9ae9432b ramips: add profile and build image for the DIR-645 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33845
 2012-10-18 07:23:04 +00:00
Gabor Juhos
06edafd079 ramips: add user space support for the DIR-645 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33844
 2012-10-18 07:23:03 +00:00
Gabor Juhos
d1a253a2fd ramips: rt3883: add inital support for the DIR-645 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33843
 2012-10-18 07:23:02 +00:00
Gabor Juhos
e962c16a88 ramips: use get_magic_long in sysupgrade image check 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33842
 2012-10-18 07:23:00 +00:00
Gabor Juhos
d832cd11f8 ramips: add image for ALL0256N-8M 
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.

[juhosg: change suffix from '8m' to '8M']

Patch by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33614
 2012-10-04 06:34:09 +00:00
Gabor Juhos
e3bcbeb427 ramips: add memory detection code for RT5350 
SVN-Revision: 33571
 2012-09-27 10:18:15 +00:00
Gabor Juhos
80d2da9f0f ramips: allow to use custom code for memory size detection 
SVN-Revision: 33570
 2012-09-27 10:18:14 +00:00
John Crispin
d8c04821c3 make uci-defaults switch detection work on rt5350 
SVN-Revision: 33549
 2012-09-25 14:47:18 +00:00
John Crispin
34d57ebd8b add ethernet support for rt5350 
SVN-Revision: 33548
 2012-09-25 14:47:08 +00:00
John Crispin
af0cd76937 make ramips ethernet use a register mapping table 
SVN-Revision: 33547
 2012-09-25 14:46:58 +00:00
John Crispin
394a560a9a unbreak port mapping detection 
SVN-Revision: 33536
 2012-09-25 09:51:48 +00:00
John Crispin
223db72385 D-Link DAP-1350; Avoid bricking esw config 
This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.

D-Link DAP-1350 goes bricked with AA 12.09-beta.

This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.

There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.

Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33411
 2012-09-15 09:28:28 +00:00
John Crispin
bf355f8ee9 ramips/rt3883: fix a typo in the ASUS profile 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33410
 2012-09-15 09:20:50 +00:00
Gabor Juhos
0a42b02126 ramips/rt305x: add initial support for Rt5350 SoC 
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33381
 2012-09-12 19:03:12 +00:00
Gabor Juhos
d8b2fef763 ramips: Add missing andmask to ramips_esw register read for recv_good value. 
Add missing andmask to ramips_esw register read for recv_good value.

Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33322
 2012-09-05 20:08:43 +00:00
Gabor Juhos
04c6143ca9 ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. 
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.

Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.

Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.

Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.

I did some tests regarding maximum packet size and did not see any

difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33321
 2012-09-05 20:08:42 +00:00
Gabor Juhos
6c7b776ae0 ramips: add rssileds to package set in profile for devices which got them. 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33316
 2012-09-05 19:22:48 +00:00
Gabor Juhos
b0da5b73b8 ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002 
SVN-Revision: 33307
 2012-08-29 10:37:51 +00:00
Gabor Juhos
54d8a55eed ramips: make built-in switch transparent for ALL0256N and ALL5002 
This allows them to transparently communicate with an external VLAN switch.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33305
 2012-08-29 10:37:47 +00:00
Gabor Juhos
bc4763a399 ramips: Power down phy on disabled switch ports 
Power down phy on disabled switch ports.

Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.

[juhosg: fix checkpatch warning]

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33304
 2012-08-29 10:37:45 +00:00
Gabor Juhos
1617f226a9 ramips: Add support for 8devices Carambola dev board. 
Add support for 8devices Carambola dev board.

The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33303
 2012-08-29 10:37:43 +00:00
Gabor Juhos
bb0785880a ramips: Rename POC registers 
Rename POC registers.

The current code uses POC1-POC3.

The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2

So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33302
 2012-08-29 10:37:41 +00:00
Gabor Juhos
f1b9d77912 ramips: Minor ramips_esw.c cleanup 
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33301
 2012-08-29 10:37:40 +00:00
Gabor Juhos
1f3400d3b4 ramips: Add switch setup to uci network defaults 
Add switch setup to uci network defaults.

The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33300
 2012-08-29 10:37:38 +00:00
Gabor Juhos
3b17f1deb8 ramips: Add swconfig support to ramips_esw.c 
Add swconfig support to ramips_esw.c

This patch adds swconfig support for ramips_esw:

Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.

The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33299
 2012-08-29 10:37:36 +00:00
Gabor Juhos
358c7e47f2 ramips: ramips_esw.c indentation cleanup 
Minor indentation cleanup.

Prepare for the main swconfig patch by cleaning up indentation a bit.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33298
 2012-08-29 10:37:35 +00:00
Gabor Juhos
cebaa557be ramips: fix board parameter for the NBG-419N (#12061) 
SVN-Revision: 33229
 2012-08-22 17:55:12 +00:00
Gabor Juhos
eb54a05e89 ramips: add profile for Allnet devices 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33225
 2012-08-22 12:36:35 +00:00
Gabor Juhos
d77418d67e ramips: add RSSI leds for uci-defaults for ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33220
 2012-08-22 09:46:30 +00:00
Gabor Juhos
67e6461ad7 ramips: add board alias for the ALL0239-3G 
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.

The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.

I'm working on implementing fixtrx for uImage in the mtd package to solve this.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33206
 2012-08-17 17:56:07 +00:00
Gabor Juhos
89606b61b1 ramips: add support for D-Link DIR-615 H1 
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.

[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]

Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33205
 2012-08-17 17:56:05 +00:00
Gabor Juhos
82759a1716 ramips: rename rt3352 usb platform devices 
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33145
 2012-08-12 12:48:31 +00:00
Gabor Juhos
1525620b0e ramips: watchdog: use maximum possible timeout by default 
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.

As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33144
 2012-08-12 12:48:28 +00:00
Gabor Juhos
615a619bc7 ramips: provide means to specify custom "image name" for uImages, use for DIR-620 
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33143
 2012-08-12 12:48:26 +00:00
Gabor Juhos
9365113040 ramips: add D-Link DIR-620 A1 support 
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.

Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33142
 2012-08-12 12:48:24 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk 
SVN-Revision: 32864
 2012-07-25 15:50:42 +00:00
John Crispin
5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode 
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
 2012-07-24 20:38:55 +00:00
John Crispin
799d6deab0 D-Link DAP-1350 initial support 
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
 2012-07-24 20:38:43 +00:00
John Crispin
03be8d08ac initial LED configuration for Fonera 2.0n 
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
 2012-07-24 20:38:31 +00:00
John Crispin
2d2479a033 add ALL5002 userspace support 
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
 2012-07-24 20:38:14 +00:00
John Crispin
e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F. 
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
 2012-07-24 20:38:08 +00:00
John Crispin
a65eee9ac3 add image build for ALL5002 
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
 2012-07-24 20:38:03 +00:00
John Crispin
0a08a776fb add support for Allnet ALL5002 to kernel 
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
 2012-07-24 20:37:56 +00:00
John Crispin
6641024f50 uart_clk on Rt3352F is always 40MHz 
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32812
 2012-07-24 20:37:50 +00:00
Gabor Juhos
372945185d ramips: rt305x: add support for Edimax 3G-6200N 
Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>

SVN-Revision: 32682
 2012-07-12 13:29:46 +00:00
Vasilis Tsiligiannis
eee358338c ramips: mac address detection for Fonera 2.0n 
Detect and apply MAC address of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>

SVN-Revision: 32490
 2012-06-23 13:58:29 +00:00
Gabor Juhos
833b4af816 ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router 
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

SVN-Revision: 32450
 2012-06-19 09:52:15 +00:00
John Crispin
a4d96aae8d bump to 3.3.8 
SVN-Revision: 32055
 2012-06-05 06:57:51 +00:00
Gabor Juhos
ffbb4f88a9 ramips: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31993
 2012-05-29 16:39:18 +00:00
Gabor Juhos
c71838faa1 ramips: WAN LED for D-Link DIR-300-B1 
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

SVN-Revision: 31989
 2012-05-29 16:39:03 +00:00
Gabor Juhos
1c552ba8e5 ramips: rt3883: add device registration code for the SPI controller 
SVN-Revision: 31922
 2012-05-27 17:10:00 +00:00
Gabor Juhos
9c241983fc ramips: allow to use the SPI driver on RT3662/RT3883 
SVN-Revision: 31921
 2012-05-27 17:09:58 +00:00
Gabor Juhos
78a750dcce ramips: rt3883: fix GPIO reservation for the SPI pins 
SVN-Revision: 31920
 2012-05-27 17:09:56 +00:00
Gabor Juhos
0622fdd82c ramips: rt305x: remove superfluous controller_data assignment 
SVN-Revision: 31919
 2012-05-27 17:09:52 +00:00
Gabor Juhos
7f5bec0642 ramips: make rt2x00 firmware extraction quiet 
SVN-Revision: 31918
 2012-05-27 17:09:50 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Gabor Juhos
e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c 
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
 2012-05-23 21:05:23 +00:00
Gabor Juhos
1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351 
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
 2012-05-23 21:05:22 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6 
SVN-Revision: 31709
 2012-05-14 09:18:32 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5 
SVN-Revision: 31645
 2012-05-07 20:11:43 +00:00
Gabor Juhos
b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes 
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
 2012-05-02 19:17:59 +00:00
Gabor Juhos
90e99b9fe8 ramips: Make serial console for DIR-300-B1 work again 
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31556
 2012-05-02 19:17:58 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4 
SVN-Revision: 31541
 2012-04-30 08:38:11 +00:00
Gabor Juhos
8e06682fb7 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31507
 2012-04-29 07:36:33 +00:00
Jonas Gorski
8fd383ae2e kernel: update linux 3.3 to 3.3.3 
SVN-Revision: 31460
 2012-04-24 09:25:38 +00:00
Gabor Juhos
1ab80c7817 ramips: rt305x: add support for the UR-336UN board 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451
 2012-04-23 16:56:06 +00:00
Gabor Juhos
3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board 
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31450
 2012-04-23 16:56:05 +00:00
Gabor Juhos
5024ffb976 ramips: nuke 3.2 suport 
SVN-Revision: 31405
 2012-04-21 12:30:53 +00:00
Gabor Juhos
6c8ca78067 ramips: switch to 3.3.2 
SVN-Revision: 31404
 2012-04-21 12:30:51 +00:00
Gabor Juhos
5c325b0057 ramips: add support for 3.3 
SVN-Revision: 31403
 2012-04-21 12:30:50 +00:00
Gabor Juhos
7f902c962b ramips: rt305x: add OHCI/EHCI registration code for RT3352 
SVN-Revision: 31402
 2012-04-21 12:30:48 +00:00
Gabor Juhos
1645928135 ramips: rt305x: fix CPU clock detection on RT3352 
SVN-Revision: 31401
 2012-04-21 12:30:47 +00:00
Gabor Juhos
fb69e28eaf ramips: rt305x: use different memory size setup for RT3352 
SVN-Revision: 31400
 2012-04-21 12:30:45 +00:00
Gabor Juhos
818aeba960 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U 
SVN-Revision: 31399
 2012-04-21 12:30:44 +00:00
Gabor Juhos
6b677e1d22 ramips: add swconfig to the default package list 
SVN-Revision: 31398
 2012-04-21 12:30:43 +00:00
Gabor Juhos
ced031a0b2 ramips: build initramfs image for the Fonera 2.0N 
SVN-Revision: 31397
 2012-04-21 12:30:42 +00:00
Gabor Juhos
fc88a363c0 ramips: rt305x: add initial support for Tenda W306R V2.0 
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396
 2012-04-21 12:30:40 +00:00
Gabor Juhos
88b5827c52 ramips: remove hardcoded console parameter from kernel configs 
SVN-Revision: 31395
 2012-04-21 12:30:30 +00:00
Jonas Gorski
a8f2bc682e kernel: also update the targets to use 3.2.15 
Thanks Gabor for spotting it.

SVN-Revision: 31337
 2012-04-17 13:12:14 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14 
SVN-Revision: 31222
 2012-04-09 14:48:51 +00:00
Jonas Gorski
d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches 
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
 2012-04-01 07:56:55 +00:00
Jo-Philipp Wich
e9c4d3d1f2 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation 
SVN-Revision: 31144
 2012-03-29 16:03:04 +00:00
Gabor Juhos
d495277d9f ramips: rt305x: build image for the DIR-615 rev D boards 
Patch from #10105.

SVN-Revision: 31101
 2012-03-27 19:29:59 +00:00
Gabor Juhos
e4e24c5512 ramips: rt305x: add add support for the Asus WL-330N board 
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31100
 2012-03-27 19:29:57 +00:00
Gabor Juhos
c1dc6df8bd kernel: update linux 3.2 to 3.2.12 
SVN-Revision: 31028
 2012-03-19 18:23:31 +00:00
Gabor Juhos
18f7081e17 ramips: rt305x: add profile for the AZtech HW-5503G board 
Patch from #11085.

SVN-Revision: 30907
 2012-03-12 17:29:06 +00:00
Gabor Juhos
0f77d0b2ba ramips: add RT3350 detection 
SVN-Revision: 30900
 2012-03-12 16:12:13 +00:00
Gabor Juhos
05d3f559f5 ramips: rt305x: rewrite SoC detection 
SVN-Revision: 30890
 2012-03-11 19:05:59 +00:00
Gabor Juhos
8cf8ee8f9d ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_* 
SVN-Revision: 30889
 2012-03-11 19:05:57 +00:00
Gabor Juhos
acb4ad86e5 ramips: replace RALINK_SOC_* macros with global variables 
SVN-Revision: 30888
 2012-03-11 19:05:56 +00:00
Gabor Juhos
8cff770eb3 ramips: introduce ramips_soc_prom_init and move SoC detection into that 
SVN-Revision: 30887
 2012-03-11 19:05:53 +00:00
Gabor Juhos
6c51c47962 ramips: build initramfs image for DIR-{3,6}00 boards 
SVN-Revision: 30882
 2012-03-11 16:39:31 +00:00
Gabor Juhos
4e15457e0e ramips: allow to use DSP ASE on RT3xxx 
SVN-Revision: 30879
 2012-03-11 16:39:26 +00:00
Gabor Juhos
0e486d2fd2 ramips: add support for unbranded XDX-RN502J board 
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:

http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197

http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html

some reports also state the Aceex 22Y uses the same board.

more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878

[juhosg: fix checkpatch warnings, use the GENERIC_4M template]

Signed-off-by: bruno schwander <bruno@tinkerbox.org>

SVN-Revision: 30809
 2012-03-04 16:09:13 +00:00
Gabor Juhos
44c8b396f9 ramips: board support for Asus RT-N10+ 
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]

Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>

SVN-Revision: 30808
 2012-03-04 16:09:11 +00:00
Gabor Juhos
9698a499b6 kernel: update linux 3.2 to 3.2.9 
SVN-Revision: 30767
 2012-03-01 19:49:02 +00:00
Gabor Juhos
72599f0c61 ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop 
SVN-Revision: 30733
 2012-02-26 10:54:13 +00:00
Gabor Juhos
100f76a010 ramips: raeth: add rx_info structure 
This helps to reduce code size on RX path:

add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12)
function                                     old     new   delta
ramips_eth_open                             1104    1144     +40
ramips_ring_free                             212     232     +20
ramips_eth_stop                              400     408      +8
ramips_eth_rx_hw                             648     592     -56

SVN-Revision: 30732
 2012-02-26 10:54:12 +00:00
Gabor Juhos
32e7b1c7d9 ramips: raeth: add tx_info structure 
This helps to reduce code size on TX path:

add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36)
function                                     old     new   delta
ramips_eth_open                             1048    1104     +56
ramips_eth_tx_housekeeping                   156     148      -8
ramips_ring_free                             224     212     -12
ramips_eth_stop                              420     400     -20
ramips_eth_hard_start_xmit                   480     428     -52

SVN-Revision: 30731
 2012-02-26 10:54:10 +00:00
Gabor Juhos
30143b715c ramips: raeth: don't process disabled interrupts 
Also rename the 'fe_int' variable.

SVN-Revision: 30713
 2012-02-25 11:59:19 +00:00
Gabor Juhos
6990f66861 ramips: fix FONERA20N image generation 
SVN-Revision: 30710
 2012-02-24 16:18:46 +00:00
Gabor Juhos
9afeeae65e ramips: image: increase minimum kernel partition size to 896k 
SVN-Revision: 30706
 2012-02-23 19:58:16 +00:00
Gabor Juhos
7089b5213e ramips: image: cleanup and sort templates/profiles 
SVN-Revision: 30705
 2012-02-23 19:58:15 +00:00
Gabor Juhos
c8718a220b ramips: image: use GENERIC_4M template for the ALL0256N board 
SVN-Revision: 30704
 2012-02-23 19:58:14 +00:00
Gabor Juhos
507c7d30f5 ramips: image: introduce mkmtd/{,phys,spi} helpers 
SVN-Revision: 30703
 2012-02-23 19:58:12 +00:00
Gabor Juhos
5f63ea18aa ramips: image: pass mtdlayout variables by value 
SVN-Revision: 30702
 2012-02-23 19:58:11 +00:00
Gabor Juhos
49e53c06b9 ramips: image: merge F5D8235V{1,2} templates 
SVN-Revision: 30701
 2012-02-23 19:58:10 +00:00
Gabor Juhos
00e7277a4c ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards 
SVN-Revision: 30700
 2012-02-23 19:58:07 +00:00
Gabor Juhos
554010d55b ramips: image: introduce mkcmdline helper 
SVN-Revision: 30699
 2012-02-23 19:58:06 +00:00
Gabor Juhos
32c6d63acf ramips: image: use the GENERIC_4M template for the V11ST-FE board 
SVN-Revision: 30698
 2012-02-23 19:58:04 +00:00
Gabor Juhos
ab65053cf0 ramips: image: simplify Makefile a bit 
SVN-Revision: 30697
 2012-02-23 19:58:03 +00:00
Gabor Juhos
9017fce3a2 ramips: image: add MkImageLzma wrapper 
SVN-Revision: 30696
 2012-02-23 19:58:02 +00:00
Gabor Juhos
c9d8f471fc ramips: image: allow to build board specific initramfs images 
SVN-Revision: 30695
 2012-02-23 19:58:01 +00:00
Gabor Juhos
c0974b46a5 ramips: merge identical switch configuration entries 
SVN-Revision: 30688
 2012-02-22 19:46:19 +00:00
Gabor Juhos
a9101a144c ramips: use unified switch identifiers in uci-defaults/network 
SVN-Revision: 30687
 2012-02-22 19:46:17 +00:00
Gabor Juhos
b6522f372f ramips: fix VLAN config of the RT-N15 
SVN-Revision: 30686
 2012-02-22 19:46:15 +00:00
Gabor Juhos
a18a821733 ramips: raeth: show interrupt statistics in debugfs 
SVN-Revision: 30681
 2012-02-22 13:06:44 +00:00
Gabor Juhos
214216c04d ramips: raeth: add debugfs support 
SVN-Revision: 30680
 2012-02-22 13:06:42 +00:00
Gabor Juhos
c1e4d709fa ramips: raeth: rename main source file 
SVN-Revision: 30679
 2012-02-22 13:06:41 +00:00
Gabor Juhos
5e6bc97d0c ramips: raeth: add missing Kconfig and Makefile 
SVN-Revision: 30671
 2012-02-21 09:44:30 +00:00
Gabor Juhos
3ba0f4e1ca ramips: move the ethernet driver into a separate directory 
Also clean up the Kconfig symbols.

SVN-Revision: 30670
 2012-02-21 09:26:43 +00:00
Gabor Juhos
a6d904b1d6 ramips: rename the spi driver 
SVN-Revision: 30669
 2012-02-21 09:26:41 +00:00
Gabor Juhos
dd001a4b0f ramips: rt3883: make rt3883_nand_data visible 
SVN-Revision: 30655
 2012-02-19 19:40:37 +00:00
Gabor Juhos
62f213eab9 ramips: merge 3.2 fixes 
SVN-Revision: 30652
 2012-02-19 17:52:23 +00:00
Gabor Juhos
18fdaee00b ramips: nuke 2.6.39 support 
SVN-Revision: 30651
 2012-02-19 17:52:20 +00:00
Gabor Juhos
e2ea72515f ramips: rt305x: nuke built-in MTD partition maps 
SVN-Revision: 30650
 2012-02-19 17:52:15 +00:00
Gabor Juhos
de6405c898 ramips: rt288x: nuke built-in MTD partition maps 
SVN-Revision: 30649
 2012-02-19 17:52:11 +00:00
Gabor Juhos
e7f59b9326 ramips: build sysupgrade image for the V11ST-FE board 
SVN-Revision: 30648
 2012-02-19 17:52:08 +00:00
Gabor Juhos
3489515a7e ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router 
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]

Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>

SVN-Revision: 30645
 2012-02-19 16:44:49 +00:00
Gabor Juhos
990ed96a2a ralink: rt3883: disable the 2GHz band on the RT-N56U 
SVN-Revision: 30632
 2012-02-18 17:36:21 +00:00
Gabor Juhos
5710530c41 ramips: rt3883: make rt3883_wlan_data visible 
SVN-Revision: 30631
 2012-02-18 17:36:16 +00:00
Gabor Juhos
e17a3ffbbd ramips: extract eeprom for the built-in wlan module on the RT-N56U 
SVN-Revision: 30604
 2012-02-16 20:06:22 +00:00
Gabor Juhos
dabca24361 ramips: rt3883: change eeprom file name 
SVN-Revision: 30603
 2012-02-16 20:06:21 +00:00
Gabor Juhos
00d963999d ramips: select HW_HAS_PCI on per-board basis 
SVN-Revision: 30576
 2012-02-16 08:17:54 +00:00
Gabor Juhos
fc967295ec ramips: rt3883: remove a stray character from rt3883.h 
SVN-Revision: 30575
 2012-02-16 08:17:53 +00:00
Gabor Juhos
b4af07d5c0 ramips: rt288x: don't register the PCI controller on each board 
SVN-Revision: 30574
 2012-02-16 08:17:52 +00:00
Gabor Juhos
f8a56dc8df ramips: raeth: separate ring allocation and setup 
SVN-Revision: 30573
 2012-02-16 08:17:50 +00:00
Gabor Juhos
49fc54be3d ramips: rt288x: fix PCI resource conflict 
SVN-Revision: 30563
 2012-02-15 21:19:02 +00:00
Florian Fainelli
37f8c19028 correct PCI IO/Mem resource swapping 
SVN-Revision: 30562
 2012-02-15 21:13:21 +00:00
Florian Fainelli
3ceebbba14 add Ralink V11ST-FE board support 
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

SVN-Revision: 30561
 2012-02-15 21:13:11 +00:00
Gabor Juhos
8b8d9a8336 ramips: raeth: add a helper function for skb allocation 
SVN-Revision: 30555
 2012-02-15 18:33:42 +00:00
Gabor Juhos
e57546de83 ramips: raeth: use netdev_alloc_skb 
SVN-Revision: 30554
 2012-02-15 18:33:41 +00:00
Gabor Juhos
064855314b ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures 
This helps GCC to generare more efficient code.

SVN-Revision: 30553
 2012-02-15 18:33:40 +00:00
Gabor Juhos
8c95385d78 ramips: raeth: use 're' instead of 'priv' everywhere 
SVN-Revision: 30552
 2012-02-15 18:33:38 +00:00
Gabor Juhos
b3b79365f3 ramips: raeth: force link down in ramips_phy_stop 
SVN-Revision: 30550
 2012-02-15 13:47:52 +00:00
Gabor Juhos
3e7b461431 ramips: raeth: serialize ramips_link_adjust calls 
SVN-Revision: 30549
 2012-02-15 13:47:50 +00:00
Gabor Juhos
dcb13d4098 ramips: raeth: add PHYLIB support 
SVN-Revision: 30547
 2012-02-15 06:47:12 +00:00
Gabor Juhos
02a01a16c7 ramips: extract eeprom for the PCIe wlan module on the RT-N56U 
SVN-Revision: 30529
 2012-02-14 17:32:45 +00:00
Gabor Juhos
43d1a2c3ab ramips: rt3883: enable PCI on the RT-N56U board 
SVN-Revision: 30528
 2012-02-14 17:32:44 +00:00
Gabor Juhos
784be92e39 ramips: rt3883: add PCI support 
SVN-Revision: 30527
 2012-02-14 17:32:42 +00:00
Gabor Juhos
10f00dc48b ramips: rt3883: sync 2.6.39 config 
SVN-Revision: 30526
 2012-02-14 17:32:41 +00:00
Gabor Juhos
ed79921fe5 ramips: use SoC specific irq.h 
SVN-Revision: 30525
 2012-02-14 17:32:40 +00:00
Gabor Juhos
8d5dfa75e6 ramips: rt3883: update package list in the default profile 
SVN-Revision: 30499
 2012-02-13 15:18:05 +00:00
Gabor Juhos
99c019fb0d ramips: add preliminary support for the Asus RT-N56U board 
SVN-Revision: 30498
 2012-02-13 15:18:04 +00:00
Gabor Juhos
97e641a0e6 ramips: raeth: enable MDIO code for RT3883 
SVN-Revision: 30497
 2012-02-13 15:18:03 +00:00
Gabor Juhos
e532fa5fd4 ramips: add preliminary support for the RT3662/RT3883 SoCs 
SVN-Revision: 30495
 2012-02-13 15:17:59 +00:00
Gabor Juhos
22ec8b4839 ramips: use GENERIC_{4,8}M image template for WR5123GN 
SVN-Revision: 30483
 2012-02-12 18:04:47 +00:00
Gabor Juhos
b7f129e19b ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline 
SVN-Revision: 30482
 2012-02-12 18:04:46 +00:00
Gabor Juhos
a287c60a61 ramips: add initial support for 3.2 
SVN-Revision: 30476
 2012-02-12 12:52:14 +00:00
Gabor Juhos
388013b0ce ramips: include 'linux/module.h' in the ramips_spi driver 
SVN-Revision: 30475
 2012-02-12 12:52:13 +00:00
Gabor Juhos
faae4235c4 ramips: rt288x: remove per-board physmap_flash_data instances 
SVN-Revision: 30474
 2012-02-12 12:52:12 +00:00
Gabor Juhos
3502e2b93f ramips: rt305x: remove per-board physmap_flash_data instances 
SVN-Revision: 30473
 2012-02-12 12:52:10 +00:00
Gabor Juhos
3a11dcdaa8 ramips: load gpio-polled keys module 
SVN-Revision: 30463
 2012-02-11 20:37:34 +00:00
Gabor Juhos
323ece9474 ramips: remove yet another CONFIG_MTD_PARTITION ifdef 
SVN-Revision: 30462
 2012-02-11 19:37:11 +00:00
Gabor Juhos
32b9e8c750 ramips: use gpio-keys-polled instead of gpio-buttons 
SVN-Revision: 30461
 2012-02-11 19:37:06 +00:00
Gabor Juhos
80b40497de ramips: add MIPS platform file 
SVN-Revision: 30459
 2012-02-11 18:16:11 +00:00
Gabor Juhos
4e1b870f3e ramips: add MDIO bus support for RT288X 
SVN-Revision: 30455
 2012-02-11 16:49:56 +00:00
Gabor Juhos
34a9ccf544 ramips: fix Belkin F5D8235-v2 VLAN setup 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30452
 2012-02-11 15:31:18 +00:00
Gabor Juhos
8916c02b47 ramips: raeth: make debugging messages configurable 
SVN-Revision: 30450
 2012-02-11 15:12:10 +00:00
Gabor Juhos
aac3ad4c0e ramips: raeth: use device pointer in DMA API calls 
SVN-Revision: 30449
 2012-02-11 15:12:08 +00:00
Gabor Juhos
1fd8724e94 ramips: raeth: add netdev pointer to private structure 
SVN-Revision: 30448
 2012-02-11 15:12:06 +00:00
Gabor Juhos
c6fa11d00f ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit 
SVN-Revision: 30447
 2012-02-11 15:12:05 +00:00
Gabor Juhos
2d055f130e ramips: raeth: unmap rx DMA address in ramips_cleanup_dma 
SVN-Revision: 30446
 2012-02-11 15:12:04 +00:00
Gabor Juhos
7bd7ddcf4e ramips: raeth: add rx_dma array to store the DMA address of the rx packets 
SVN-Revision: 30445
 2012-02-11 15:12:02 +00:00
Gabor Juhos
647af823d9 ramips: raeth: use dma_addr_t for the descriptors 
SVN-Revision: 30444
 2012-02-11 15:12:01 +00:00
Gabor Juhos
df5892d1f1 ramips: raeth: unmap DMA memory when a packet is received 
SVN-Revision: 30443
 2012-02-11 15:11:56 +00:00
Gabor Juhos
617954ca5d ramips: raeth: add a temporary pktlen variable 
SVN-Revision: 30442
 2012-02-11 15:11:55 +00:00
Gabor Juhos
d1d492eaf9 ramips: raeth: protect macro parameters 
SVN-Revision: 30441
 2012-02-11 15:11:50 +00:00
Gabor Juhos
8250692359 ramips: raeth: indicate dropped packets in stats 
SVN-Revision: 30440
 2012-02-11 15:11:49 +00:00
Gabor Juhos
c67adbbddb ramips: raeth: use the NUM_TX_DESC for the tx_skb array 
SVN-Revision: 30439
 2012-02-11 15:11:47 +00:00
Gabor Juhos
a2c8789578 ramips: use uncached address in detect_mem_size 
SVN-Revision: 30438
 2012-02-11 15:11:45 +00:00
Gabor Juhos
ba4c9b3a8f ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files 
SVN-Revision: 30437
 2012-02-11 15:11:43 +00:00
Gabor Juhos
f2dd67dc09 ramips: rt288x: remove CONFIG_MTD_PARTITION ifdefery from machine files 
SVN-Revision: 30436
 2012-02-11 15:11:41 +00:00
Gabor Juhos
d6b9f88743 ramips: refresh patches 
SVN-Revision: 30435
 2012-02-11 15:11:40 +00:00
Gabor Juhos
9cde29f1a7 ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN 
This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19.

This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210

It's also worth noting that this board has a GPIO line to control the
power to the USB port.

[juhosg:
 - fix checkpatch warnings,
 - reorder Kconfig entry,
 - merge the sysupgrade patch,
 - add GPL header]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 30434
 2012-02-11 15:11:36 +00:00
Gabor Juhos
59b474732c ramips: rt305x: merge duplicated mac address setup 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30433
 2012-02-11 15:11:34 +00:00
Gabor Juhos
7298ef2456 ramips: rt305x: add profile for the Belkin f5d8235v2 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30432
 2012-02-11 15:11:32 +00:00
Gabor Juhos
0430194cc3 ramips: fix compiler warning in prom.c 
SVN-Revision: 30424
 2012-02-10 17:38:46 +00:00
Gabor Juhos
44ed690cb3 ramips: change vlan_config for the ALFA W502U board 
This change moves the WAN port into a separate VLAN.

SVN-Revision: 29969
 2012-01-31 18:34:10 +00:00
Gabor Juhos
b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards 
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
 2012-01-26 10:44:23 +00:00
Gabor Juhos
02e77c6ae1 ramips: generate sysupgrade image for the ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29884
 2012-01-24 11:48:48 +00:00
Gabor Juhos
944c8aacdb ramips: add user-space support for ALL0256N 
This adds uci-defaults and sysupgrade support for the ALL0256N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29883
 2012-01-24 11:48:47 +00:00
Gabor Juhos
1932a7205c ramips: add kernel support for ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29882
 2012-01-24 11:48:45 +00:00
Gabor Juhos
9cf1d4e06e ramips: scripts updates 
In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29871
 2012-01-23 10:23:32 +00:00
Gabor Juhos
809fe38e41 ramips fix f5d8235-v1 diag LED support 
SVN-Revision: 29857
 2012-01-22 18:11:39 +00:00
Gabor Juhos
e9d8deaaed ramips: add sysled and sysupgrade to wr512-3gn 
Patch from #10035.

SVN-Revision: 29847
 2012-01-22 13:43:23 +00:00
Gabor Juhos
557cf076b4 ramips: sysupgrade for ESR-9753 
This patch add sysupgrade for Engenius ESR-9753

Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29824
 2012-01-20 10:49:26 +00:00
John Crispin
a2708d11e8 ramips: Rework ramips_eth to not require irqsave locking anymore 
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.

This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 29762
 2012-01-17 11:23:11 +00:00
Gabor Juhos
244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board 
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
 2011-12-28 08:43:43 +00:00
Gabor Juhos
f50b02b559 ramips: rt288x: change base address and window size of flash bank 0 
SVN-Revision: 29616
 2011-12-28 08:43:36 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board 
SVN-Revision: 29615
 2011-12-28 08:43:32 +00:00
Gabor Juhos
723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board 
SVN-Revision: 29612
 2011-12-27 16:56:30 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002 
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
 2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
 2011-12-23 14:27:10 +00:00
Gabor Juhos
03bce34384 ramips: define firmware partition for Omnima MiniEMBWiFi 
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

SVN-Revision: 29602
 2011-12-23 14:27:05 +00:00
Gabor Juhos
0c38d36488 ramips: add support for Omnima MiniEMBWiFi board 
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
 2011-12-14 20:51:26 +00:00
Gabor Juhos
43bd4c6ad1 ramips: fix mac addresses on the DIR-300/600 boards 
SVN-Revision: 29471
 2011-12-06 20:06:08 +00:00
Gabor Juhos
5ef6ec4a31 ramips: set mac addresses for the NBG-419N 
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>

SVN-Revision: 29454
 2011-12-05 17:27:07 +00:00
Gabor Juhos
750d560767 ramips: set preinit interface mac on the hw550-3g board 
Based on a patch by Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29453
 2011-12-05 17:27:06 +00:00
Gabor Juhos
b5d7b359b2 ramips: use ramips_get_mac_* functions in the preinit script 
SVN-Revision: 29452
 2011-12-05 17:27:04 +00:00
Gabor Juhos
4d5b940e66 ramips: move ramips_get_mac_* functions to lib/ramips.sh 
SVN-Revision: 29451
 2011-12-05 17:27:03 +00:00
Gabor Juhos
cc853acb3a ramips: add ramips_ prefix to get_mac_{binary,nvram} functions 
SVN-Revision: 29450
 2011-12-05 17:27:02 +00:00
Gabor Juhos
b1137d48a4 ramips: fix network configuration setup 
SVN-Revision: 29448
 2011-12-05 16:54:48 +00:00
Gabor Juhos
56c9b50006 ramips: fix argus board rootfs size 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29422
 2011-12-04 15:24:57 +00:00
Gabor Juhos
3fccc3b376 ramips: enable sysupgrade on the RT-N15 board 
SVN-Revision: 29393
 2011-12-01 22:48:58 +00:00
Gabor Juhos
4b2d1c3ad3 ramips: wrap long line in platform upgrade script 
SVN-Revision: 29392
 2011-12-01 22:48:57 +00:00
Gabor Juhos
d622263588 ramips: add profile for the Asus RT-N15 
This uses previously submitted rtl8366 kernel packages.

[juhosg: The kmod-gpio-dev package has been removed from the package list.]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29391
 2011-12-01 22:48:55 +00:00
Gabor Juhos
3a9e02fa41 ramips: setup default network configuration for RT-N15 
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29390
 2011-12-01 22:48:54 +00:00
Gabor Juhos
fc61c107f0 ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile 
It is needed by the RT-N15 board.

SVN-Revision: 29389
 2011-12-01 22:48:53 +00:00
Gabor Juhos
80221fcd2a ramips: remove default network configuration, and generate that from uci-defaults 
SVN-Revision: 29387
 2011-12-01 22:48:51 +00:00
Gabor Juhos
4f6c58adac ramips: use /lib/functions/uci-defaults.sh 
SVN-Revision: 29386
 2011-12-01 22:48:48 +00:00
Gabor Juhos
569d8de6d6 ramips: simplify uci-defaults/network script 
SVN-Revision: 29383
 2011-12-01 22:48:45 +00:00
Gabor Juhos
66c9a351dd ramips: setup mac and network interfaces from separate functions 
SVN-Revision: 29382
 2011-12-01 22:48:43 +00:00
Gabor Juhos
62d18e9f9a ramips: fix Asus RT-N15 board support 
Fix Asus RT-N15 flash partitions and make an image.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29381
 2011-12-01 22:48:42 +00:00
Gabor Juhos
2dd79d55c7 ramips: Sparklan wcr-150gn board fixes 
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29380
 2011-12-01 22:48:41 +00:00
Gabor Juhos
7c678e7511 ramips: fix package name of kmod-input-gpio-buttons 
Based on a patch from Omnima Limited.

SVN-Revision: 29379
 2011-12-01 22:48:39 +00:00
Gabor Juhos
2ed38b24a8 ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29378
 2011-12-01 22:48:38 +00:00
Gabor Juhos
295e04084c ramips: setup bc2 mac addresses from the generic network script 
SVN-Revision: 29377
 2011-12-01 22:48:37 +00:00
Gabor Juhos
02f95d4fb3 ramips: combine network setup for all boards in one file 
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 29376
 2011-12-01 22:48:35 +00:00
Vasilis Tsiligiannis
17ccd4aec4 rt305x: Create factory image for Fonera 2.0n 
SVN-Revision: 28689
 2011-10-31 09:23:44 +00:00
Gabor Juhos
ee8077f0fe ramips: Support for NexAira BC2 
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
 2011-10-24 21:49:36 +00:00
Gabor Juhos
18452a753b ramips: fix switch-port assignment for HW550-3G 
WAN is on swtich port 0 for Aztech HW550-3G.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28570
 2011-10-24 21:49:32 +00:00
Gabor Juhos
68a01c0180 ramips: combine led setup for all boards in one file 
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 28569
 2011-10-24 21:49:31 +00:00
Gabor Juhos
72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board 
SVN-Revision: 28078
 2011-08-22 20:41:49 +00:00
Gabor Juhos
4b96d3af2a ramips: rt305x: remove unused defines from mach-nw718.c 
SVN-Revision: 28077
 2011-08-22 20:41:48 +00:00
Gabor Juhos
462ca22e9c ramips: sort Makefile entries 
SVN-Revision: 28076
 2011-08-22 20:41:47 +00:00
Gabor Juhos
d50494f3bb ramips: sort RAMIPS_MACH_* defines 
SVN-Revision: 28075
 2011-08-22 20:41:45 +00:00
Gabor Juhos
90686691ce ramips: fix wireless firmware extraction for wr512-3gn 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28073
 2011-08-22 18:08:45 +00:00
Gabor Juhos
f0049824b9 ramips: remove 'default [yn]' keywords from machine Kconfig entries 
SVN-Revision: 28054
 2011-08-19 15:55:12 +00:00
Gabor Juhos
6720025497 ramips: rt305x: fix wr512n image generation 
SVN-Revision: 28053
 2011-08-19 15:55:11 +00:00
Gabor Juhos
9085b05d9e ramips: rt305x: support for wr512-3gn-like routers 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28052
 2011-08-19 15:55:10 +00:00
Gabor Juhos
46b101ad0a ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28051
 2011-08-19 15:55:08 +00:00
Gabor Juhos
05209860da ramips: fix wireless on Belkin F5D8235 v2 
Fix wireless firmware extract from flash for Belkin F5D8235 v2.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28050
 2011-08-19 15:55:07 +00:00
Gabor Juhos
f8ab604eb6 ramips: fix typo in default packages 
Fix fivebytepypo - there is no such kernel module wpad-mini :)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28049
 2011-08-19 15:55:05 +00:00
Hauke Mehrtens
09b1073f9b kernel: update kernel to version 2.6.39.4 
SVN-Revision: 28022
 2011-08-16 22:04:10 +00:00
Gabor Juhos
ace8ce0845 ramips: use maccalc instead of hexdump + sed 
SVN-Revision: 28007
 2011-08-15 19:00:23 +00:00
Gabor Juhos
bfc47ffead ramips: rt305x: fix mac addresses on the Netcore NW718 board 
SVN-Revision: 28006
 2011-08-15 18:55:53 +00:00
Gabor Juhos
17c041cd0b ramips: add maccalc to the default package list 
SVN-Revision: 28005
 2011-08-15 18:55:52 +00:00
Gabor Juhos
67e480971c ramips: add input drivers to the default package list 
SVN-Revision: 28003
 2011-08-15 18:55:50 +00:00
Gabor Juhos
35ecf12059 ramips: rt305x: make config and factory partitions read-only on the ATP-52B 
SVN-Revision: 28002
 2011-08-15 18:55:48 +00:00
Gabor Juhos
75e2360ab3 ramips: add uci-defaults scripts to preconfigure USB LEDs 
SVN-Revision: 28000
 2011-08-15 14:12:00 +00:00
Gabor Juhos
e1b176de82 ramips: rt305x: add some USB modules to the default profile 
SVN-Revision: 27999
 2011-08-15 14:11:58 +00:00
Gabor Juhos
169d68c98c ramips: rt305x: add dwc_otg driver 
Based on a patch by Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27997
 2011-08-15 14:11:55 +00:00
Gabor Juhos
0ca16a4600 ramips: rt305x: register the dwc_otg device on the relevant boards 
SVN-Revision: 27996
 2011-08-15 14:11:52 +00:00
Gabor Juhos
addc86fdbd ramips: rt305x: add dwc_otg platform device 
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 27995
 2011-08-15 14:11:51 +00:00
Gabor Juhos
6ef87ff5e6 ramips: sync kernel config 
SVN-Revision: 27993
 2011-08-15 14:11:48 +00:00
Gabor Juhos
4ee4fc9725 ramips: load the input drivers during preinit 
SVN-Revision: 27992
 2011-08-15 14:11:47 +00:00
Gabor Juhos
a3c7e71ae1 ramips: add support for Argus ATP-52B 
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
 2011-08-15 14:11:45 +00:00
Gabor Juhos
1ebcf03789 ramips: allow to specify port layout for the switch of the RT305x/RT3350 
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27990
 2011-08-15 14:11:43 +00:00
Gabor Juhos
ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board 
SVN-Revision: 27813
 2011-07-28 10:56:32 +00:00
Gabor Juhos
437e184484 ramips: rt305x: add support for the Asus RT-G32 B1 board 
Based on a patch by: Sergiy <piratfm@gmail.com>

SVN-Revision: 27812
 2011-07-28 10:56:30 +00:00
Gabor Juhos
7193f29d96 ramips: rt305x: enable M25P80 driver 
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27811
 2011-07-28 10:56:28 +00:00
Gabor Juhos
c6db514de8 ramips: rt305x: introduce rt305x_register_spi helper 
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27810
 2011-07-28 10:56:27 +00:00
Gabor Juhos
57122e7ccc ramips: add SPI controller driver 
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27809
 2011-07-28 10:56:25 +00:00
Gabor Juhos
3f986df05f ramips: rt305x: add support for the DIR-600 B1,B2 boards 
SVN-Revision: 27808
 2011-07-28 10:56:24 +00:00
Gabor Juhos
857c1028ac ramips: rt305x: change machine id for DIR-300 
SVN-Revision: 27807
 2011-07-28 10:56:22 +00:00
Gabor Juhos
42d3a55347 ramips: rt305x: rename LEDs on the DIR-300-B1 
SVN-Revision: 27806
 2011-07-28 10:56:21 +00:00
Gabor Juhos
39689b648f ramips: rt305x: sort Kconfig/Makefile entries 
SVN-Revision: 27805
 2011-07-28 10:56:19 +00:00
Gabor Juhos
32c0534516 ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards 
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B

Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>

SVN-Revision: 27804
 2011-07-28 10:56:18 +00:00
Gabor Juhos
57663ce25b ramips: fix PWH2004 image generation 
SVN-Revision: 27803
 2011-07-28 10:56:15 +00:00