Commit Graph

13188 Commits

Author SHA1 Message Date
Rafał Miłecki
55e766d78d bcm53xx: refresh configs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43963
2015-01-14 07:03:17 +00:00
Felix Fietkau
bc78885e70 ramips: add missing -Os cflag for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43954
2015-01-13 00:34:49 +00:00
Felix Fietkau
acfc6c153b ramips: use a larger number of rx descriptors on mt7621 to work around rx overrun related packet loss
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43953
2015-01-13 00:34:45 +00:00
Felix Fietkau
05d4b8c79b ramips: remove interrupt coalescing, it is unnecessary with napi polling and could reduce throughput
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43952
2015-01-13 00:34:38 +00:00
Imre Kaloz
b0a2d7ad0d now that the driver knows it, use the 88e6172's switch type in the mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43945
2015-01-12 09:32:33 +00:00
Nicolas Thill
edacde5042 target/uml: add missing config symbols
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43940
2015-01-11 22:03:06 +00:00
Luka Perkov
9db3df9d6b mvsw61xx: track and set per-VLAN port state in STU
Since the driver doesn't know anything about (M)STP
we just hard-set the ports to be enabled if they are
part of the VLAN.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43938
2015-01-11 17:20:16 +00:00
Luka Perkov
0b2cbeca7a mvsw61xx: clean up and expand register definitions
- eliminate MV_CPUPORT; not necessary since we define
  the CPU port(s) via Device Tree

- add STU and expand VTU operations

- update register names to match those of 88E61xx rather than
  mvswitch's 88E6060

- use more consistent formatting

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43937
2015-01-11 17:20:06 +00:00
Luka Perkov
1e39f3aef8 mvsw61xx: rework chip recognition
Recognizes 88E6171/6172/6176 at the moment.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43936
2015-01-11 17:20:03 +00:00
Luka Perkov
a1872182bb mvsw6171: rename to 'mvsw61xx'
In preparation for properly supporting switches
beyond the 88E6171.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43935
2015-01-11 17:19:58 +00:00
Luka Perkov
b78cddafcc kernel: update 3.14 to 3.14.28
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43929
2015-01-11 01:28:32 +00:00
Florian Fainelli
884a01d8a4 mcs814x: switch to 3.14 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43927
2015-01-10 20:12:15 +00:00
Florian Fainelli
dd4ee63fa4 mcs814x: add 3.14 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43926
2015-01-10 20:12:02 +00:00
Florian Fainelli
3b523f6780 mcs814x: account for dtb output directory differences
3.3 produced *.dtb files in arch/arm/boot/ while 3.14 will produce those
in arch/arm/boot/dts/, adjust the image makefile accordingly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43925
2015-01-10 20:11:18 +00:00
Florian Fainelli
d43997b223 mcs814x: set low_mem feature flag
Most of the devices we support have between 16MiB and 32MiB of RAM
available.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43924
2015-01-10 20:11:07 +00:00
Florian Fainelli
cfdb22f0e4 mcs814x: rename config-default to config-3.3
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43923
2015-01-10 20:10:57 +00:00
Zoltan Herpai
741e0fd7a1 sunxi: change bananapro DTS to use the already published patch, clean up 3.18 config of generic symbols
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43922
2015-01-10 19:56:30 +00:00
Felix Fietkau
547ab2de5a ar71xx: fix console string in images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43917
2015-01-10 18:48:14 +00:00
Florian Fainelli
3b21b2ae00 adm5120: add experimental 3.14 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43915
2015-01-10 18:10:04 +00:00
Florian Fainelli
c119814b2b adm5120: move files to files-3.8
In preparation for adding new kernel support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43914
2015-01-10 18:08:53 +00:00
Zoltan Herpai
3db73fc350 kernel: add missing config symbols for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43912
2015-01-10 17:23:55 +00:00
Felix Fietkau
9229b34d92 ar71xx: port wndr3700/3800 to the new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43910
2015-01-10 15:27:07 +00:00
Felix Fietkau
492bcad8ec ar71xx: port carambola2 to the new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43909
2015-01-10 15:27:00 +00:00
Felix Fietkau
5b0d18093d ramips: convert mt7621 images to new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43908
2015-01-10 15:26:53 +00:00
Felix Fietkau
e66f1292aa ramips: simplify mkimage kernel loadaddr/entry handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43906
2015-01-10 15:26:38 +00:00
Zoltan Herpai
1e0c22507a sunxi: bump kernel to 3.18 - refresh patches - add bananapro, cubietruck, mele_m9 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43900
2015-01-09 19:35:14 +00:00
Felix Fietkau
48d8bc4f97 ramips: add preliminary Archer C20i support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43898
2015-01-09 15:40:51 +00:00
Imre Kaloz
7f21a92ffa switch to 3.18
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43893
2015-01-09 12:36:07 +00:00
Imre Kaloz
182bbf60b7 upgrade to 3.18.2
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43892
2015-01-09 12:35:19 +00:00
John Crispin
baad87ae3d kernel: add SECCOMP to menuconfig
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43888
2015-01-08 21:23:18 +00:00
John Crispin
5789169b1d gemini: add ata driver
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43885
2015-01-08 20:26:34 +00:00
John Crispin
5a5d558d0f gemini: add rtc-gemini driver
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43884
2015-01-08 20:26:27 +00:00
John Crispin
2120e48e75 ramips: Fix HooToo HT-TM02 support.
- Fix LED definitions.
- Add mode-switch slider definition (at GPIO 14).
- Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.)
- Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1.
- Fix board name, as the company name is HooToo and not HOOTOO.
- Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.)

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 43883
2015-01-08 20:26:20 +00:00
John Crispin
5ea31bbc58 ramips: Fix for gpio falling interrupt mask
This patch fixes a wrong mask operation for the rt2880-compatible ralink devices.
The mask operation reads the actual flags and then logical combines it with the pin flag it want to set.
Unfortunally, for rising as for falling interrupt flags the actual flag status of the rising interrupts was used.
That caused a problem if you want to use more than one falling GPIO interrupt.
Now the correct (seperated) actual status is used for both, falling and rising.

Signed-off-by: Jonas Arndt <info@greenwire-elektronik.de>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43882
2015-01-08 20:26:13 +00:00
John Crispin
2ea64717e2 ramips: update BR-6475ND dts
Update firmware location for 2.4GHz radio on the Edimax BR-6475nD.

Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 43881
2015-01-08 20:26:02 +00:00
John Crispin
f9dcd95919 ramips: base-files: Whitespace fixes.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 43880
2015-01-08 20:25:55 +00:00
John Crispin
c9a390f9e1 lantiq: BT Home Hub 3A - userspace
BT Home Hub 3A - userspace

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43879
2015-01-08 20:25:48 +00:00
John Crispin
9d7d29439b lantiq: BT Home Hub 3A - profile
BT Home Hub 3A - profile

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43878
2015-01-08 20:25:41 +00:00
John Crispin
550784f1ea lantiq: BT Home Hub3A - device tree
BT Home Hub3A - device tree

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43877
2015-01-08 20:25:35 +00:00
John Crispin
1ba71cbc14 lantiq: Fix adsl led on Home Hub 2B
This fixes the adsl led on the Home Hub 2B.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43876
2015-01-08 20:25:28 +00:00
Felix Fietkau
5bbe758e4e lantiq: add missing NAND_WRITE_DATA in NAND driver.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43856
2015-01-05 21:37:21 +00:00
Imre Kaloz
26b57a6dc2 refresh kernel config, add cpuidle and cpufreq support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43855
2015-01-05 15:08:20 +00:00
Imre Kaloz
bfa1f18bfb enable swconfig and the mvsw6171 driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43854
2015-01-05 15:02:18 +00:00
Felix Fietkau
1cbf0fbcb4 ar8216: factor out AR8327/AR8337-specific driver code into ar8327.c
Move all AR8327/AR8337-specific driver code into a separate source file
ar8327.c and adjust patches so that ar8327.c is compiled if
CONFIG_AR8216_PHY is set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43845
2015-01-05 13:03:07 +00:00
Felix Fietkau
cc02d4c72d ar8216: move definitions from ar8216.c to ar8216.h and introduce ar8327.h
Move several structure definitions and #defines from ar8216.c
to ar8216.h and move AR8327/AR8337 header stuff into a new
header file ar8327.h.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43844
2015-01-05 13:02:57 +00:00
Felix Fietkau
7cc5b6f9e9 all targets: remove all =m kernel config symbols
modules build during the kernel compile phase are ignored anyway,
all modules should be built using KernelPackage in
package/kernel/linux/modules/*
selecting the appropriate config symbols there rather than in
target/linux/*/config-*

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43842
2015-01-05 13:02:44 +00:00
Felix Fietkau
2b9379052e kernel: bridge: multicast: backport a few more fixes for 3.10
The following patches unfortunately didn't hit the kernel stable
branches yet, therefore cherrypicking them for OpenWRT here:

* bridge: fix netfilter/NF_BR_LOCAL_OUT for own, locally generated queries
* bridge: multicast: enable snooping on general queries only
* bridge: multicast: add sanity check for general query destination

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

SVN-Revision: 43841
2015-01-05 13:02:31 +00:00
Felix Fietkau
36fa8e4ce2 octeon: enable VLAN support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43840
2015-01-05 13:02:26 +00:00
Felix Fietkau
1d21ebab99 octeon: remove config-default
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43839
2015-01-05 13:02:21 +00:00
Imre Kaloz
5ed3a7aeb3 add tmp421 to the device tree instead of relying on autodetect
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43825
2015-01-04 17:26:07 +00:00
Luka Perkov
deb35ad4ac kernel: update 3.18 to 3.18.1
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43821
2015-01-03 22:59:47 +00:00
Luka Perkov
9c8422a09b kernel: update 3.14 to 3.14.27
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43820
2015-01-03 22:59:43 +00:00
Felix Fietkau
fd7be4073a ramips: fix WSR-600DHP flash layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43819
2015-01-03 18:31:27 +00:00
Felix Fietkau
373c84c30b ramips: fix WSR-1166DHP flash layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43818
2015-01-03 18:31:17 +00:00
Felix Fietkau
ada0452b14 ramips: fix WSR-{600,1166} names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43817
2015-01-03 18:31:11 +00:00
Felix Fietkau
ca32b89cc0 ramips: fix wsr-1166 sysupgrade support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43816
2015-01-03 18:31:06 +00:00
Felix Fietkau
88e8f99f7f ramips: on mt7621 only enable xhci for the eval board (still needs patch cleanup to take effect)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43815
2015-01-03 18:30:57 +00:00
Felix Fietkau
bdc35c8ef4 ramips: fix WSR-600 image format
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43814
2015-01-02 21:53:45 +00:00
Felix Fietkau
8eb074756d ramips: use CONFIG_MTD_SPLIT_UIMAGE_FW instead of CONFIG_MTD_UIMAGE_SPLIT
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43813
2015-01-02 21:53:38 +00:00
Felix Fietkau
ed20caeb65 ramips: fix image format for WSR-1166
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43812
2015-01-02 21:53:31 +00:00
Felix Fietkau
10c2bdbc4f ramips: disable ethernet checksum offloads for mt7621, they are broken
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43811
2015-01-02 21:53:24 +00:00
Felix Fietkau
51b1f0ca5c ramips: use netif_receive_skb instead of napi_gro_receive when rx csum offload is unavailable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43810
2015-01-02 21:53:18 +00:00
Felix Fietkau
baa3a38ac6 kernel: add mtd split support for trx images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43809
2015-01-02 21:53:11 +00:00
Felix Fietkau
81e3014e6d ramips: rework and fix m25p80 chunked-io support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43808
2015-01-02 21:53:02 +00:00
Felix Fietkau
aefd3c569c ramips: split mt7621 spi into a separate driver, increase maximum transfer size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43807
2015-01-02 21:52:53 +00:00
Felix Fietkau
cc5f89c66a kernel: add a mtdsplit implementation for tp-link firmware headers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43806
2015-01-02 21:52:44 +00:00
Felix Fietkau
4153c0adff kernel: move mtdsplit files to drivers/mtd/mtdsplit/ to simplify maintenance, unify patches across kernel versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43805
2015-01-02 21:52:35 +00:00
Imre Kaloz
6bfd210ade honor the bootloader's bootargs
Only overwrite the bootloader's bootargs if "chosen" exists in the dtb

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43802
2015-01-02 16:48:20 +00:00
Imre Kaloz
f12a0f4308 enable wpad-mini by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43801
2014-12-31 21:59:07 +00:00
Rafał Miłecki
d1a28cfbb2 bcm53xx: support flashing CHK and CyberTAN images
SVN-Revision: 43800
2014-12-30 17:45:53 +00:00
Rafał Miłecki
81b8d95f2c brcm47xx: support for flashing CHK and CyberTAN images
This will allow simple sysupgrade-s including simpler reverting to the
original firmware.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43799
2014-12-30 17:19:36 +00:00
Rafał Miłecki
cca3990b16 brcm47xx: verify if CHK/CyberTAN contains valid TRX
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43798
2014-12-30 17:19:02 +00:00
Hauke Mehrtens
bb5a18ff92 mpc83xx: add support for kernel 3.14
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43797
2014-12-29 17:11:13 +00:00
Hauke Mehrtens
cb96191088 mpc52xx: add support for kernel 3.14
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43796
2014-12-29 16:12:52 +00:00
Hauke Mehrtens
2ea959650e ep93xx: add support for kernel 3.14
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43795
2014-12-29 13:55:59 +00:00
Hauke Mehrtens
469e8adbac kernel: add some missing config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43794
2014-12-29 11:59:32 +00:00
Hauke Mehrtens
f22aeccdd2 ipq806x: refresh patches
This makes the patchs apply again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43792
2014-12-28 19:31:40 +00:00
Felix Fietkau
0f0460afda oxnas: re-enable ubifs
After the changes make ubinize.cfg optional in image.mk, ubifs
generation can now safely be enabled again.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43789
2014-12-27 13:03:26 +00:00
Felix Fietkau
2ef587a8fc oxnas: clk-oxnas: rework pllb enable function
kernel lock debugging unveiled that we should not call
of_reset_control_get inside a clock's enable operation (see below)

move of_reset_control_* previously used in pllb_clk_enable to new
pllb_clk_prepare and pllb_clk_unprepare functions.
use a container to carry runtime information.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2742 lockdep_trace_alloc+0xb8/0xfc()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.26 #6
[<c001a6ac>] (unwind_backtrace) from [<c0016dec>] (show_stack+0x10/0x14)
[<c0016dec>] (show_stack) from [<c0194f68>] (dump_stack+0x7c/0x94)
[<c0194f68>] (dump_stack) from [<c0021b50>] (warn_slowpath_common+0x68/0x8c)
[<c0021b50>] (warn_slowpath_common) from [<c0021ba4>] (warn_slowpath_fmt+0x30/0x40)
[<c0021ba4>] (warn_slowpath_fmt) from [<c0061b30>] (lockdep_trace_alloc+0xb8/0xfc)
[<c0061b30>] (lockdep_trace_alloc) from [<c00cb740>] (kmem_cache_alloc+0x1c/0xf8)
[<c00cb740>] (kmem_cache_alloc) from [<c01d33c8>] (of_reset_control_get+0xe8/0x12c)
[<c01d33c8>] (of_reset_control_get) from [<c0269228>] (pllb_clk_enable+0x14/0xbc)
[<c0269228>] (pllb_clk_enable) from [<c0265738>] (__clk_enable+0x54/0xa0)
[<c0265738>] (__clk_enable) from [<c0265acc>] (clk_enable+0x18/0x2c)
[<c0265acc>] (clk_enable) from [<c04325f8>] (oxnas_pcie_probe+0x3b8/0x6a0)
[<c04325f8>] (oxnas_pcie_probe) from [<c01f2510>] (platform_drv_probe+0x18/0x48)
[<c01f2510>] (platform_drv_probe) from [<c01f1070>] (driver_probe_device+0xd8/0x24c)
[<c01f1070>] (driver_probe_device) from [<c01f1298>] (__driver_attach+0x70/0x94)
[<c01f1298>] (__driver_attach) from [<c01ef728>] (bus_for_each_dev+0x4c/0x98)
[<c01ef728>] (bus_for_each_dev) from [<c01f0818>] (bus_add_driver+0xcc/0x1e8)
[<c01f0818>] (bus_add_driver) from [<c01f169c>] (driver_register+0xa0/0xe8)
[<c01f169c>] (driver_register) from [<c01f2568>] (platform_driver_probe+0x20/0xa4)
[<c01f2568>] (platform_driver_probe) from [<c0013a3c>] (do_one_initcall+0x90/0x140)
[<c0013a3c>] (do_one_initcall) from [<c0421d38>] (kernel_init_freeable+0x1e4/0x2c0)
[<c0421d38>] (kernel_init_freeable) from [<c000c214>] (kernel_init+0x8/0x104)
[<c000c214>] (kernel_init) from [<c0008768>] (ret_from_fork+0x14/0x2c)
---[ end trace 5f17ed2f61e0683f ]---

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43787
2014-12-27 13:03:12 +00:00
Felix Fietkau
604fc8faf5 kernel/generic: fix warnings if libata-ledtrig is disabled
accidentally #if was used instead of #ifdef, thus gcc warned
about CONFIG_ATA_LEDS being undefined...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43786
2014-12-27 13:02:58 +00:00
Imre Kaloz
edbb903461 fix mvneta vlan tagging
This is a 3.14.x backport of:
"mvneta: Fix TSO and checksum for non-acceleration vlan traffic"

Upstream commits:

817dbfa5d1bc276a72c1a577310382008e8aca0a
2d39d120781a5770573dc6ed672a5a562f541aea

Fixes vlan tagging on SoC interfaces for the WRT1900AC.  Useful
when using mvsw6171 driver.

Signed-off-by: Mark Milburn <mark.a.milburn@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43781
2014-12-26 14:48:33 +00:00
Imre Kaloz
e23b988bf5 only call UbinizeImage and BuildSysUpgrade for boards we support them on
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43779
2014-12-26 13:45:18 +00:00
Imre Kaloz
f3755f5758 The ubinized filesystems should be used for generating the final images, so store them in KDIR instead.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43778
2014-12-26 13:33:22 +00:00
Felix Fietkau
fa3cb9fa5c ar71xx: add flush reset register writes, should fix restart issues (#17839)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43777
2014-12-26 12:36:38 +00:00
Felix Fietkau
a96afecf5c kernel: backport a few PHY layer fixes from upstream
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43776
2014-12-26 12:36:30 +00:00
Felix Fietkau
d7320d2d89 ar71xx: rename/refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43775
2014-12-26 12:36:22 +00:00
Imre Kaloz
5744500ab6 we've changed places with Luka, reflect that :)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43774
2014-12-25 22:34:15 +00:00
Imre Kaloz
2bff4ca7b1 use mwlwifi by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43773
2014-12-25 22:29:29 +00:00
Felix Fietkau
93192e65e8 oxnas: sata_oxnas: make irq handler more readable
safed one level of indention by using 'continue' instead of a
lengthy if-clause.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v2: use logic-AND instead of '?' operator when checking for hw bug 6320

SVN-Revision: 43768
2014-12-22 20:47:10 +00:00
Felix Fietkau
74a9e1c1b0 oxnas: sata_oxnas: refactoring phase 2
- replaced // comments by /* comments */
 - added line-breaks where needed
 - fixed white-space according to kernel style
 - fixed some obvious spelling mistakes in comments and printks
 - removed some unneeded left-overs imported from vendor code-base
 - replaced printk(...) by libata macros where possible

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43767
2014-12-22 20:47:01 +00:00
Felix Fietkau
feda47451f oxnas: sata_oxnas: refactoring phase 1
locking for 2nd port and hwraid was added from vendor's GPL code which
doesn't comply with current kernel coding style.

 - moved all global variables into host_priv
 - renamed locks
 - sanetized acquire() and release() parameter list

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43766
2014-12-22 20:46:49 +00:00
Felix Fietkau
3113bf4cb8 oxnas: refresh kernel config-3.1[48]
and no longer compile-in ext4 filesystem now that sata_oxnas is
also built as a module.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43765
2014-12-22 20:46:41 +00:00
Felix Fietkau
5506420980 kernel: remove openwrt micrel.c (replaced by upstream driver)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43762
2014-12-22 14:37:07 +00:00
Felix Fietkau
570fe5c662 kernel: disable soft-reset for generic PHY devices to avoid accidentally clearing preinitialized state
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43757
2014-12-20 15:26:38 +00:00
Rafał Miłecki
e7d7f59171 bcm53xx: support WAN connected to switch port 0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43754
2014-12-20 15:09:01 +00:00
Luka Perkov
0847247129 mvsw6171: note support for 88E6172 switches
The '6171 and '6172 are similar enough to work
without any changes to the code.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43753
2014-12-19 22:02:59 +00:00
Luka Perkov
873202fc0b kirkwood: add *plugs to uci-defaults
Set defaults health led to a timer heartbeet (200/800)
and populate network for:

- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43752
2014-12-19 11:05:13 +00:00
Luka Perkov
39743e45f8 kikwood: populate kirkwood.sh with new boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43751
2014-12-18 18:38:43 +00:00
Luka Perkov
ec9a0f898a kirkwood: set default EA4500 switch config
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43750
2014-12-18 18:38:38 +00:00
Hauke Mehrtens
abca0462d3 kernel: bgmac: fix some problems
There are some problems in the napi usage that are fixed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43749
2014-12-18 16:25:22 +00:00
Hauke Mehrtens
192e945479 bcm53xx: PCIe: add link check again
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43748
2014-12-18 16:23:42 +00:00
Felix Fietkau
4ccf215a3e ar7: remove leftover 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43746
2014-12-18 11:57:42 +00:00
Felix Fietkau
4571fc780d ar71xx: add support for qca956x soc
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.

tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43744
2014-12-18 11:28:53 +00:00
Felix Fietkau
2f9b042d69 ar8216: Inline function ar8xxx_create_mii
Inline function ar8xxx_create_mii.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43743
2014-12-18 11:28:47 +00:00
Felix Fietkau
2289c7a010 ar8216: Remove read/write/rmw member functions from ar8xxx_priv
Remove read/write/rmw member functions from ar8xxx_priv

There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43742
2014-12-18 11:28:39 +00:00
Felix Fietkau
45a494b808 ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43741
2014-12-18 11:28:34 +00:00
Felix Fietkau
0e7f844c66 ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43740
2014-12-18 11:28:28 +00:00
Felix Fietkau
054767cebc ar8216: remove unused function parameter in ar8327_led_register
Remove unused function parameter in ar8327_led_register.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43739
2014-12-18 11:28:20 +00:00
Rafał Miłecki
e21e9c5548 bcm53xx: backport spi-nor changes and update bcm53xxspiflash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43738
2014-12-17 14:53:25 +00:00
Felix Fietkau
d27c682def kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43736
2014-12-17 12:27:14 +00:00
Luka Perkov
309e74b86d kirkwood: add sheevaplug and derivatives
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2

Signed-off-by: Gérald Kerma <drEagle@doukki.net>

SVN-Revision: 43735
2014-12-17 08:33:55 +00:00
Imre Kaloz
211cac98d5 Belkin AC 1750 DB (F9K1115v2) support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43734
2014-12-17 08:27:38 +00:00
John Crispin
0ffb7323d0 ralink: remove partitoon map from mt7621.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43720
2014-12-15 15:55:37 +00:00
Rafał Miłecki
dd9ca05249 bcm53xx: sysupgrade support for devices with serial flash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43719
2014-12-15 15:43:46 +00:00
Rafał Miłecki
c3e9796cd5 brcm47xx: extract magics from specific upgrade images (and still reject them)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43718
2014-12-15 11:09:14 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Rafał Miłecki
a5b6b7e419 brcm47xx: detect (and still reject for now) CyberTAN fw format
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43714
2014-12-15 09:59:44 +00:00
Rafał Miłecki
fbea00b031 ramips: update mtd patches to apply after changes from r43700
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43709
2014-12-15 09:10:43 +00:00
Rafał Miłecki
b5b4bdc066 brcm47xx: use separated function in upgrade to detect file type
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43708
2014-12-15 08:51:14 +00:00
John Crispin
2db6da5532 kirkwood: enable EA4500 switch on 3.18
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43704
2014-12-14 08:57:58 +00:00
John Crispin
374ab9decc gemini: update usb driver and merge registers into one patch
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43703
2014-12-14 08:57:52 +00:00
John Crispin
fef7b4241f gemini: merge register ethernet patches into one
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43702
2014-12-14 08:57:43 +00:00
John Crispin
6f2b7567b8 ralink: drop old pinmux nodes from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43701
2014-12-14 08:57:16 +00:00
Rafał Miłecki
b1bfed548c kernel: warn users to use the new (dedicated) firmware splitter
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43700
2014-12-14 00:35:03 +00:00
Rafał Miłecki
2b4fbeb6d4 kernel: move old firmware uimage splitter into separated patch
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43696
2014-12-13 20:06:47 +00:00
Felix Fietkau
e984869e22 realview: drop old kernel configs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43692
2014-12-13 11:55:59 +00:00
Felix Fietkau
cfe3280494 au1000: remove leftover 3.3 kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43691
2014-12-13 11:55:49 +00:00
Felix Fietkau
511fadd857 au1000: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43690
2014-12-13 11:55:41 +00:00
Felix Fietkau
0f25db1a7d rb532: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43689
2014-12-13 11:55:32 +00:00
Felix Fietkau
d34e2a337c at91: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43688
2014-12-13 11:55:24 +00:00
Felix Fietkau
45380ebd1a brcm2708: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43687
2014-12-13 11:55:11 +00:00
Felix Fietkau
170ce29617 ixp4xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43686
2014-12-13 11:55:04 +00:00
Felix Fietkau
c7e8b5ebbd lantiq: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43685
2014-12-13 11:54:57 +00:00
Felix Fietkau
daeec86fba mpc85xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43684
2014-12-13 11:54:49 +00:00
Florian Fainelli
8692819c2c netlogic: fix XLR network driver build
Backport an upstream submission to fix xlr_net

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43682
2014-12-13 08:08:30 +00:00
John Crispin
263070a2e7 ramips:Add support for Aigale Ai-BR100
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 43681
2014-12-13 08:07:03 +00:00
John Crispin
aa697f1313 mxs: indention and whitespace fixes
Align this file with the style of most other modules.mk.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43680
2014-12-13 08:06:22 +00:00
John Crispin
a28d07abbe ar71xx: add an extra check on board_name for ath10k firmware patchs
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.

SVN-Revision: 43679
2014-12-13 08:06:01 +00:00
John Crispin
10dbdb28d7 oxnas: fix gpio-fan on kd20
define speed-map and include kmod-hwmon-gpiofan in kd20 profile

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43678
2014-12-13 08:04:54 +00:00
John Crispin
9013a144fd oxnas: also make use of the GPIO poweroff driver
Works great to power-off the kd20 ;)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43677
2014-12-13 08:02:52 +00:00
John Crispin
4a7c88f139 kernel/generic: remove some left-over garbage from ledtrig patch
cosmetics. clean a style issue introduced by r43674.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43676
2014-12-13 08:00:22 +00:00
John Crispin
118534ea39 oxnas: use libata ledtrig support for kd20 hdd leds
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43675
2014-12-12 20:24:33 +00:00
John Crispin
ee6b5c6007 kernel/generic: add ledtrig support to libata
SVN-Revision: 43674
2014-12-12 20:24:21 +00:00
John Crispin
1701a9a4b9 oxnas: clean up default package selection
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43673
2014-12-12 20:24:13 +00:00
John Crispin
d7b4bf8966 kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43670
2014-12-12 17:14:14 +00:00
Felix Fietkau
5b16fd1bf8 ar8216: enable cpu port to receive arp and broadcast frames for ar8236
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43668
2014-12-12 16:23:29 +00:00
John Crispin
6c4e7b22eb ralink: fix lenovo y1 wan port mapping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43667
2014-12-12 16:17:31 +00:00
John Crispin
7068b7ed1c oxnas: build S-ATA driver as a module
From: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43665
2014-12-12 16:17:13 +00:00
John Crispin
b1f7a027da ralink: make uartf functional on AWM002
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43664
2014-12-12 16:17:03 +00:00
John Crispin
58a4113c5e oxnas: use u-boot.bin in KDIR
This fixes building *u-boot-initramfs.bin images using ImageBuilder

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43663
2014-12-12 16:16:57 +00:00
Zoltan Herpai
8feb491156 sunxi: fix led on bananapi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43661
2014-12-12 16:11:17 +00:00
Zoltan Herpai
92cf73cf11 mxs: allow bootloader to pass kernel cmdline
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43657
2014-12-12 13:37:21 +00:00
Zoltan Herpai
a1467fb73b mxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43656
2014-12-12 13:18:29 +00:00
Zoltan Herpai
f34dfaf249 mxs: add i2c and spi packages to profiles
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43651
2014-12-12 12:14:40 +00:00
Zoltan Herpai
50f9d27da8 mxs: fix automatic status led detection
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43650
2014-12-12 12:01:39 +00:00
Zoltan Herpai
1014bb0fb4 mxs: update dts file for Duckbill
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43649
2014-12-12 11:43:56 +00:00
Zoltan Herpai
2265c4db31 mxs: i2c changes - add package for i2c module - remove i2c debug
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43648
2014-12-12 11:39:22 +00:00
Zoltan Herpai
fc2dff246d mxs: add kernel module for spi interface
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43647
2014-12-12 11:10:04 +00:00
Zoltan Herpai
276a732a77 mxs: make boardname consistent with other targets
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43646
2014-12-12 11:03:55 +00:00
Luka Perkov
a3eed6bc35 kernel: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43643
2014-12-11 23:29:07 +00:00
Luka Perkov
a2a6077fd0 kirkwood: sort 110-nas profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43642
2014-12-11 23:29:04 +00:00
John Crispin
21349229f7 au1000: revert 43626 due to syntax errors
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43641
2014-12-11 22:27:56 +00:00
John Crispin
ad35bcc41e oxnas: use ARM BCJ filter for XZ decompression
Restoring the config for kernel 3.14 didn't contain that change already
made to config-3.18.
It is needed to make squashfs in the kernel match the compression settings
for ARCH=arm in the framework.
If set to ARMTHUMB, boot fails due to squashfs being unreadable if the
filesystem was generated for wth ARM BCJ filter.

in include/image.mk:    BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
Thus the ARM filter is used for all ARM targets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43640
2014-12-11 20:41:51 +00:00
Rafał Miłecki
3aaee1ba02 bcm53xx: failsafe support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43639
2014-12-11 20:31:07 +00:00
Felix Fietkau
bb4ffcf928 xburst: fix subtarget config file names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43637
2014-12-11 20:07:52 +00:00
Felix Fietkau
4b80e52575 x86: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43636
2014-12-11 20:07:45 +00:00
Felix Fietkau
3cc3c0a518 octeon: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43635
2014-12-11 20:07:39 +00:00
Felix Fietkau
c095c7c202 adm8668: remove linux 3.3 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43634
2014-12-11 20:07:31 +00:00
Jonas Gorski
b7b52ce7de ar7: remove config-3.10
Remove a leftover file from the 3.10 support removal.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43632
2014-12-11 19:35:43 +00:00
John Crispin
6f4656c19b netlogic: sync kernel config
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43630
2014-12-11 18:58:12 +00:00
John Crispin
1ef2106725 ralink: mt7621 was missing a symbol that made the CC builder fail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43629
2014-12-11 18:54:30 +00:00
John Crispin
ce06a742c9 mcp85xx/p1020: fixup config-default
this was missed during the 3.14 bump

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43628
2014-12-11 18:39:22 +00:00
John Crispin
6d52fd203d kernel/modules: fix chipidea
it should needs to depend on imx and mxs

also remove duplicate kmod definition from mxs target

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43627
2014-12-11 18:35:41 +00:00
John Crispin
ed61e202a1 au1000: distinguish different models and set correct MAC-address
The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43626
2014-12-11 18:28:44 +00:00
Felix Fietkau
1558a6bcbf mpc85xx: fix another typo in the image makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43625
2014-12-11 18:18:16 +00:00
Felix Fietkau
5c89c4a5de mpc85xx: add missing devicetree ranges property for ethernet devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43624
2014-12-11 18:18:10 +00:00
Felix Fietkau
4db5bc59b1 mpc85xx: fix typo in image name
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43622
2014-12-11 17:52:12 +00:00
Felix Fietkau
2d9d3e7163 mpc85xx: fix initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43620
2014-12-11 15:29:39 +00:00
Rafał Miłecki
b55199cf41 bcm53xx: support LEDs on Buffalo devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43616
2014-12-11 11:23:26 +00:00
Luka Perkov
9a74026206 kirkwood: add 3.18 support
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43613
2014-12-11 01:20:41 +00:00
Rafał Miłecki
40d94a3ef0 bcm53xx: backport NVRAM driver sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43612
2014-12-10 21:50:57 +00:00
Rafał Miłecki
ba81966001 bcm53xx: use bcma callback in SPROM driver to fill the SPROM
This is required because it has to be called at very precise moment. See
comment in driver for details.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43611
2014-12-10 21:24:11 +00:00
Rafał Miłecki
b0b43e1ef9 bcm53xx: use static NVRAM pointer for now
This will allow us to sync with code sent for upstream.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43608
2014-12-10 19:56:56 +00:00
Luka Perkov
a1da38f7b1 kernel: drop CONFIG_PROC_DEVICETREE in 3.18
This option was removed in upstream commit 8357041.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43607
2014-12-10 18:55:53 +00:00
Rafał Miłecki
960130e99c bcm53xx: clean up nvram header
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43606
2014-12-10 18:29:26 +00:00
Luka Perkov
fa5f896cb7 kernel: add missing config symbols for 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43605
2014-12-10 18:13:34 +00:00
Rafał Miłecki
7093580424 bcm53xx: move SPROM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43604
2014-12-10 18:07:01 +00:00
Rafał Miłecki
27a91a99d9 bcm53xx: move NVRAM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43603
2014-12-10 18:01:24 +00:00
Rafał Miłecki
3fab0d818c bcm53xx: move NVRAM header to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43602
2014-12-10 17:37:24 +00:00
John Crispin
9432cbd577 oxnas: add support for 2nd S-ATA port to sata_oxnas driver
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.

this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43598
2014-12-10 15:51:07 +00:00
John Crispin
1fa7c8587d oxnas: add copyright header to sata_oxnas
sata_oxnas.c is obviously a refactored version of sata_ox820.c
which does contain this header.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43597
2014-12-10 15:51:00 +00:00
Luka Perkov
fd492354bb kernel: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43591
2014-12-09 23:29:52 +00:00
Luka Perkov
3b17625394 kirkwood: Iomega ix2-200: use all remaining MTD space for rootfs
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43590
2014-12-09 23:29:49 +00:00
Felix Fietkau
8c6f1412b1 ar71xx: improve ethernet driver cache footprint by removing an unnecessary pointer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43588
2014-12-09 12:28:46 +00:00
Felix Fietkau
27f36718d3 kernel: add a patch to make netfilter conntrack cache routing information
Significantly improves routing / NAT performance

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43587
2014-12-09 11:01:49 +00:00
Felix Fietkau
db04bbd2ec ar71xx: remove another leftover broken chunk of code in the unaligned access hacks patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43586
2014-12-09 09:38:33 +00:00
Rafał Miłecki
613bc3ef3f bcm53xx: bcm_nand: fix compilation
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43584
2014-12-08 18:28:54 +00:00
Rafał Miłecki
aed6b26431 bcm53xx: bcm_nand: switch from cmdlinepart to ofpart
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43580
2014-12-08 17:39:07 +00:00
Rafał Miłecki
73237c0c9b brcm47xx: add WNDR3400 V3 buttons
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43579
2014-12-08 17:02:28 +00:00
Jonas Gorski
bdb1ee51f8 brcm63xx: fix a few issues in irq chip drivers
Fix locking and lock usage, making it compile for SMP.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43578
2014-12-08 16:11:52 +00:00