ar8216: factor out AR8327/AR8337-specific driver code into ar8327.c

Move all AR8327/AR8337-specific driver code into a separate source file
ar8327.c and adjust patches so that ar8327.c is compiled if
CONFIG_AR8216_PHY is set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43845
This commit is contained in:
Felix Fietkau 2015-01-05 13:03:07 +00:00
parent cc02d4c72d
commit 1cbf0fbcb4
23 changed files with 1154 additions and 1050 deletions

File diff suppressed because it is too large Load Diff

View File

@ -419,6 +419,76 @@ struct ar8xxx_priv {
int monitor_port;
};
u32
ar8xxx_read(struct ar8xxx_priv *priv, int reg);
void
ar8xxx_write(struct ar8xxx_priv *priv, int reg, u32 val);
u32
ar8xxx_rmw(struct ar8xxx_priv *priv, int reg, u32 mask, u32 val);
void
ar8xxx_phy_dbg_write(struct ar8xxx_priv *priv, int phy_addr,
u16 dbg_addr, u16 dbg_data);
void
ar8xxx_phy_mmd_write(struct ar8xxx_priv *priv, int phy_addr, u16 addr, u16 data);
void
ar8xxx_phy_init(struct ar8xxx_priv *priv);
int
ar8xxx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_set_reset_mibs(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_set_mirror_rx_enable(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_get_mirror_rx_enable(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_set_mirror_tx_enable(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_get_mirror_tx_enable(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_set_mirror_monitor_port(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_get_mirror_monitor_port(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_set_mirror_source_port(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_get_mirror_source_port(struct switch_dev *dev,
const struct switch_attr *attr,
struct switch_val *val);
int
ar8xxx_sw_set_pvid(struct switch_dev *dev, int port, int vlan);
int
ar8xxx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan);
int
ar8xxx_sw_hw_apply(struct switch_dev *dev);
int
ar8xxx_sw_reset_switch(struct switch_dev *dev);
int
ar8xxx_sw_get_port_link(struct switch_dev *dev, int port,
struct switch_port_link *link);
int
ar8216_wait_bit(struct ar8xxx_priv *priv, int reg, u32 mask, u32 val);
static inline struct ar8xxx_priv *
swdev_to_ar8xxx(struct switch_dev *swdev)
{
@ -460,4 +530,10 @@ static inline bool chip_is_ar8337(struct ar8xxx_priv *priv)
return priv->chip_ver == AR8XXX_VER_AR8337;
}
static inline void
ar8xxx_reg_set(struct ar8xxx_priv *priv, int reg, u32 val)
{
ar8xxx_rmw(priv, reg, 0, val);
}
#endif

File diff suppressed because it is too large Load Diff

View File

@ -18,7 +18,7 @@
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

View File

@ -16,7 +16,7 @@
@@ -22,6 +22,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o

View File

@ -35,7 +35,7 @@
+++ b/drivers/net/phy/Makefile
@@ -23,6 +23,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o

View File

@ -18,7 +18,7 @@
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

View File

@ -16,7 +16,7 @@
@@ -22,6 +22,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o

View File

@ -35,7 +35,7 @@
+++ b/drivers/net/phy/Makefile
@@ -23,6 +23,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o

View File

@ -18,7 +18,7 @@
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

View File

@ -16,7 +16,7 @@
@@ -22,6 +22,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o

View File

@ -35,7 +35,7 @@
+++ b/drivers/net/phy/Makefile
@@ -23,6 +23,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o

View File

@ -20,4 +20,4 @@
+obj-$(CONFIG_MVSW6171_PHY) += mvsw6171.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o

View File

@ -18,7 +18,7 @@
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

View File

@ -16,7 +16,7 @@
@@ -23,6 +23,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o

View File

@ -35,7 +35,7 @@
+++ b/drivers/net/phy/Makefile
@@ -24,6 +24,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o

View File

@ -20,4 +20,4 @@
+obj-$(CONFIG_MVSW6171_PHY) += mvsw6171.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o

View File

@ -18,7 +18,7 @@
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

View File

@ -16,7 +16,7 @@
@@ -21,6 +21,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o

View File

@ -35,7 +35,7 @@
+++ b/drivers/net/phy/Makefile
@@ -22,6 +22,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o

View File

@ -18,7 +18,7 @@
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o

View File

@ -16,7 +16,7 @@
@@ -22,6 +22,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o

View File

@ -35,7 +35,7 @@
+++ b/drivers/net/phy/Makefile
@@ -23,6 +23,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o