Add support for GL.iNET (AX3000) B3000.
Speficiations:
* SoC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
* Memory: Winbond W634GU6NQB-11 (512 MiB DDR3-933)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
* Wi-Fi: QCN6102 (2x2:2 5 Ghz 802.11an/ac/ax)
* Ethernet: IPQ5018 integrated virtual switch connected to an external
QCA8337 switch (3 Ports 10/100/1000 GBASE-T)
* Flash: Winbond W25N01GWZEIG (128 MiB)
* LEDs: 1x single-color blue LED (GPIO 24 Active High)
1x single-color white LED (GPIO 23 Active High)
* Buttons: 1x Reset (GPIO 27 Active Low)
Flash Instructions:
*** The .img files are now universal ! ***
Openwrt --> openwrt-qualcommax-ipq50xx-glinet_gl-b3000-squashfs-factory.img
GL.iNet OEM --> openwrt-b3000-4.5.18-0731-1722397535.img
Either file can be flashed, in any of the available upgrade options, in both Firmwares.
Pick a file .. pick a method .. and SEND IT !!
Signed-off-by: Scott Mercer <TheRootEd24@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17903
Signed-off-by: Robert Marko <robimarko@gmail.com>
This adds the Thermal framework support for STM32MP157.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
In modules.mk, sort packages in alphabetical order.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move kmod-phy-stm32-usbphyc in the "USB Support" menu and kmod-stm32-timers
in "Other modules" menu.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add STM32MP157C-DK2 support. This profile also supports the STM32MP157F-DK2
board. The only difference between these two boards is the CPU frequency
(650MHz for 157C and 800MHz for 157F).
A SCMI variant is available. With this variant the reset and clock
resources are provided by OP-TEE and the associated SCMI services.
It is the configuration recommended by STMicroelectronics, with secured
system resources.
The specifications bellow only list supported features.
Specifications
--------------
SOC: STM32MP157C
RAM: 512 MiB
Storage: SD Card
Ethernet: 1x 1 Gbps
Wireless: 2.4GHz Cypress CYW43455 (802.11b/g/n)
LEDs: Heartbeat (Blue)
USB: 4x 2.0 Type-A
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The nvram file is generic for all stm32 boards, add a symlink for
STM32MP157C-DK2 and the SCMI variant.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add entry for STM32MP157C-DK2 and the SCMI variant.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add entry for STM32MP157C-DK2 and the SCMI variant.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add entry for STM32MP157C-DK2 and the SCMI variant.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/18119
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Patch 87cb0446b7da also applies to higher kernel versions.
To apply to them it has been moved to a separate file in pending.
Fixes: 87cb0446b7da ("generic: fix broken TCP fraglist GRO patch")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18511
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Fix an error while building target/linux x64 on macOS 15.4 host,
due to the PATH_MAX macro being redefined:
mkdir -p /Volumes/test/openwrt/build_dir/target-x86_64_musl/linux-x86_64/linux-6.6.86/tools/objtool && make O=/Volumes/test/openwrt/build_dir/target-x86_64_musl/linux-x86_64/linux-6.6.86 subdir=tools/objtool --no-print-directory -C objtool
exec-cmd.c:15:9: error: 'PATH_MAX' macro redefined [-Werror,-Wmacro-redefined]
15 | #define PATH_MAX 4096
| ^
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/sys/syslimits.h:103:9: note: previous definition is here
103 | #define PATH_MAX 1024 /* max bytes in pathname */
| ^
exec-cmd.c is compiled as part of objtool to run on the host, and
therefore host headers are used, where PATH_MAX is already defined.
Using an old OpenWRT snapshot from 2025-02-16, where linux-6.6.77
used to build correctly, does not help. Reverting from Xcode 16.3 to
16.2 does not help either.
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18530
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add backport patch that fixes ath12k regdomain parsing failure in
6GHz band triggered by the latest regdb/board-2.bin update.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18512
Signed-off-by: Robert Marko <robimarko@gmail.com>
Previous commits missed some refreshing
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18512
Signed-off-by: Robert Marko <robimarko@gmail.com>
The WL-WN573HX3 is an AX3000 outdoor Access Point by WAVLINK,
also sold in Europe as 7Links WLR-1300 (ZX-5612).
Specifications:
- MT7981B + MT7976 AX3000 2x2 DBDC (160 MHz)
- 16 MiB SPI NOR, 256 MiB RAM
- Gigabit ethernet port, 802.3af PoE
- IP67 outdoor case for wall or pole mounting with
four single band RP-SMA fiberglass antennas (8 dBi)
Installation:
- OEM Web UI is at 192.168.30.1 which will forward to
http://netlogin.link (using a captive portal)
- login with default password `admin`
- skip setup wizard by navigating directly to
http://netlogin.link/html/meshUpgrade.html
- upload WN573HX3-sysupgrade.bin
- reset to factory defaults to discard OEM UCI settings
MAC address assignment:
LAN 80:xx:xx:76:xx:25 hw 0x44e
WLAN 2.4G 80:xx:xx:76:xx:27 factory 0x04 (label MAC)
WLAN 5G 82:xx:xx:46:xx:27
pair key 8a:xx:xx:76:xx:27 also on label, not used by OpenWrt
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Include the image and kernel size limitations defined for each device to
the device metadata JSON.
These informations are only added if defined.
Signed-off-by: David Bauer <mail@david-bauer.net>
Specifications:
SoC: Mediatek MT7621AT (880 MHz MIPS dual-core, quad-thread, CPU)
512 Megabyte DDR3 SDRAM
32 Megabyte NOR Flash
4 Gigabit RJ45 PoE ports
2 MT7615N wifi chips (2.4GHz and 5GHz)
2 USB ports (1xUSB2 and 1xUSB3 - GL3510 chip)
RJ45 RS232 port on front panel (Max3232 chip)
2x mPCIe 2.0 slots for 4G/5G cards
2x SIM slot
1x SDCard Slot
Power via DC12V
4x Cell Antennae
4x Wifi Antennae
MAC Address Locations:
Purpose Ex. Partition Offset
2.4 Ghz *:01 factory 0x4
5 GHz *:02 factory 0x8004
LAN *:03 factory 0xe000
WAN *:04 factory 0xe006
MAC address prefix E4:3A:65 is registered to MofiNetwork Inc
and used as the prefix for all MAC addresses.
Manual: https://mofinetwork.com/files/MoFi_Network_MOFI5500_5GXeLTE_EM7690_SPECS.pdf
WiFi chip specs: https://www.mediatek.com/products/broadband-wifi/mt7615
CPU chip specs: https://www.mediatek.com/products/home-networking/mt7621
Teardown Pictures: https://fccid.io/2AE6X-MOFI5500/Internal-Photos/Internal-Photos-5591739
Installation:
Update Mofi 5500 to at least stock firmware version 4.8.6. (Available on the Mofi website.)
Previous versions are untested in the upgrade process. Log into the LuCI web interface,
usually at 192.168.10.1 and visit the 'System->Backup/Flash Firmware' page.
Upload and flash the firmware as usual.
Note to Maintainers: Do not remove SUPPORTED_DEVICES from the Makefile!
The customized Mofi version of OpenWRT (stock firmware) expects to see mofi5500 as the device
name. The stock firmware does not allow for forcing an installation.
Without this line, users cannot upload the new firmware through the stock Mofi firmware.
This device uses cell modems that could use QMI or MBIM.
Add LuCI Modem Manager to allow people to use these. Also, if they have
two cell network cards, ethernet, USB, or other kinds of networks, they may wish
to use MWAN3 to allow failover amongst their networks.
Please compile it with mwan3 for multiple WAN connections.
Co-authored-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Rick Mac Gillis <noreply@rickmacgillis.com>
During envtools conversion to the generic uboot-tools package, a syncconfig
call was added to the configure step which was previously not there.
We received multiple spourious reports that now envtools were failing to
build [1], but it was not reproducible.
However, it seems that this could easily be reproduced on MacOS 15 and
somehow that syncconfig call is breaking build by Makefile.autoconf not
being executed and thus no "include/config.h" is generated.
So, since this call was not previously there and U-Boot will actually do
syncconfig on its own when needed lets drop it.
[1] 293d5f1366 (commitcomment-154347516)
Link: https://github.com/openwrt/openwrt/pull/18515
Signed-off-by: Robert Marko <robimarko@gmail.com>
Look for OPENWRT_VERBOSE and pass it down to the U-Boot so we actually
get verbose build info when needed for debugging.
Link: https://github.com/openwrt/openwrt/pull/18515
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix an issue where NCM interface initialization fails because of wrong
modem manufacturer detection.
gcom call returns an output with Windows-style line breaks (containing \r)
what makes awk call return empty or malformed manufacturer name. Changing
awk RS variable to handle both \n and \r\n as line break fixes this issue.
Fixes#17448 and #17998 GitHub issues.
Signed-off-by: Jakub Łabuz <jakub@labuz.dev>
Link: https://github.com/openwrt/openwrt/pull/18460
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update uboot-ath79 package to v2025.04 for ath79 devices.
Additionally, new "CONFIG_NO_NET" option was introduced and replaced
disabled CONFIG_NET option ("# CONFIG_NET is not set"). So replace
that old options in the NEC Aterm devices as well.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18475
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fedora 42 updated to GCC15 which now defaults to GNU23 as the default
instead of GNU17[1], and this breaks m4 compilation.
This looks like a gnulib issue, so until that is updated/fixed
lets simply set C language version back to GNU17.
[1] https://gcc.gnu.org/gcc-15/porting_to.html#c23
Link: https://github.com/openwrt/openwrt/pull/18506
Signed-off-by: Robert Marko <robimarko@gmail.com>
Xcode 16.3 defines TARGET_OS_MAC, it was not defined in prior versions.
zutil.h conditionally defines fdopen as NULL when this macro is defined,
resulting in the following build error:
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/_stdio.h:318:7: e>
318 | FILE *fdopen(int, const char *) __DARWIN_ALIAS_STARTING(__MAC_10_6, __IPHONE_2_0, __DARWIN_ALIAS(fdopen));
| ^
./zutil.h:147:33: note: expanded from macro 'fdopen'
147 | # define fdopen(fd,mode) NULL /* No fdopen() */
In Xcode 16.2 and earlier, TARGET_OS_MAC was not defined so this entire
block was ignored, gcc and gdb used to compile and work fine.
This may have been used for compatibility with older versions of macOS,
but is no longer needed. By pure luck, the build worked fine for a long
time, because it did not properly detect macOS.
Fixed by removing the check for TARGET_OS_MAC.
Note that since Xcode 16.3, an entire set of TARGET_OS macros
are now defined, most of which are set to 0:
TARGET_OS_LINUX 0
TARGET_OS_MAC 1
TARGET_OS_OSX 1
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18467
Signed-off-by: Robert Marko <robimarko@gmail.com>
Xcode 16.3 defines TARGET_OS_MAC, it was not defined in prior versions.
zutil.h conditionally defines fdopen as NULL when this macro is defined,
resulting in the following build error:
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/_stdio.h:318:7: error: expected identifier or '('
318 | FILE *fdopen(int, const char *) __DARWIN_ALIAS_STARTING(__MAC_10_6, __IPHONE_2_0, __DARWIN_ALIAS(fdopen));
| ^
./zutil.h:147:33: note: expanded from macro 'fdopen'
147 | # define fdopen(fd,mode) NULL /* No fdopen() */
In Xcode 16.2 and earlier, TARGET_OS_MAC was not defined so this entire
block was ignored, gcc and gdb used to compile and work fine.
This may have been used for compatibility with older versions of macOS,
but is no longer needed. By pure luck, the build worked fine for a long
time, because it did not properly detect macOS.
Fixed by removing the check for TARGET_OS_MAC.
Note that since Xcode 16.3, an entire set of TARGET_OS macros
are now defined, most of which are set to 0:
TARGET_OS_LINUX 0
TARGET_OS_MAC 1
TARGET_OS_OSX 1
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18467
Signed-off-by: Robert Marko <robimarko@gmail.com>
Upstream version of ARM gc sections skip eeping some section. It was
reported some kernel load hang hence restore what we original did and
introduce a new patch that add the additional entry on top of the
upstream version.
Fixes: #18500
Fixes: 7843f21c5120 ("generic: replace ARM gc sections patch with upstream version")
Tested-by: Stefan Kalscheuer <stefan@stklcode.de> (Turris Omnia)
Link: https://github.com/openwrt/openwrt/pull/18503
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Some regression were reported with the backported upstream version. Old
kernel require an additional flush in some case and this was handled in
the old downstream patch.
Reintroduce the flush to fix the regression and refresh affected patch.
Fixes: f63d64ede06b ("generic: move patch from pending to backport")
Link: https://github.com/openwrt/openwrt/pull/18501
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The ATS SFP GT-T quirk patch was backported to stable kernel 6.6 but
was not notice while bumping the kernel version as they listed the quirk
at the bottom of the SFP quirk table while our hack patch put it at the
top.
With migrating to the upstream version, the duplication was made more
apparent.
Drop the double entry for the SFP module as it's already there and not
needed and refresh patches.
Link: https://github.com/openwrt/openwrt/pull/18484
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The submenu of two diag modules is missing, fix it.
Fixes: 65de1e0 ("kernel: add missing symbols for lxc")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/18480
Signed-off-by: Robert Marko <robimarko@gmail.com>
Drop GC sections ARMv7 patch as the new upstream version already handle
it by disabling the config in the specific EFI boot stub driver.
Link: https://github.com/openwrt/openwrt/pull/18464
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Replace ARM gc sections patch with upstream version. It seems this
feature is finally supported upstream with some minor difference.
In theory the upstream version should cut even more stuff, this really
needs to be evaluated if it's OK also to handle regression with the
kernel 6.12 update.
Link: https://github.com/openwrt/openwrt/pull/18464
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Replace SFP ignore TX FAULT with upstream version by backporting the 2
related upstream patch. Refresh SFP affected patch.
Link: https://github.com/openwrt/openwrt/pull/18464
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move all patch that got merged upstream from pending to backport and add
related tag. This is to make it easier to update to kernel 6.12.
Patch 680 required some special care as the upstream version had to be
split in a series of 6 patch.
Referesh all affected patch.
Link: https://github.com/openwrt/openwrt/pull/18464
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
updated 200-ubus_dns.patch
all remaining patches not required
Changelog for version 2.91 - https://thekelleys.org.uk/dnsmasq/CHANGELOG
version 2.91
Fix spurious "resource limit exceeded messages". Thanks to
Dominik Derigs for the bug report.
Fix out-of-bounds heap read in order_qsort().
We only need to order two server records on the ->serial field.
Literal address records are smaller and don't have
this field and don't need to be ordered on it.
To actually provoke this bug seems to need the same server-literal
to be repeated twice, e.g., --address=/a/1.1.1.1 --address-/a/1.1.1.1
which is clearly rare in the wild, but if it did exist it could
provoke a SIGSEGV. Thanks to Daniel Rhea for fuzzing this one.
Fix buffer overflow when configured lease-change script name
is too long.
Thanks to Daniel Rhea for finding this one.
Improve behaviour in the face of non-responsive upstream TCP DNS
servers. Without shorter timeouts, clients are blocked for too long
and fail with their own timeouts.
Set --fast-dns-retries by default when doing DNSSEC. A single
downstream query can trigger many upstream queries. On an
unreliable network, there may not be enough downstream retries
to ensure that all these queries complete.
Improve behaviour in the face of truncated answers to queries
for DNSSEC records. Getting these answers by TCP doesn't now
involve a faked truncated answer to the downstream client to
force it to move to TCP. This improves performance and robustness
in the face of broken clients which can't fall back to TCP.
No longer remove data from truncated upstream answers. If an
upstream replies with a truncated answer, but the answer has some
RRs included, return those RRs, rather than returning and
empty answer.
Fix handling of EDNS0 UDP packet sizes.
When talking upstream we always add a pseudo header, and set the
UDP packet size to --edns-packet-max. Answering queries from
downstream, we get the answer (either from upstream or local
data) If local data won't fit the advertised size (or 512 if
there's not an EDNS0 header) return truncated. If upstream
returns truncated, do likewise. If upstream is OK, but the
answer is too big for downstream, truncate the answer.
Modify the behaviour of --synth-domain for IPv6.
When deriving a domain name from an IPv6 address, an address
such as 1234:: would become 1234--.example.com, which is
not legal in IDNA2008. Stop using the :: compression method,
so 1234:: becomes
1234-0000-0000-0000-0000-0000-0000-0000.example.com
Fix broken dhcp-relay on *BSD. Thanks to Harold for finding
this problem.
Add --dhcp-option-pxe config. This acts almost exactly like
--dhcp-option except that the defined option is only sent when
replying to PXE clients. More importantly, these options are sent
in reply PXE clients when dnsmasq in acting in PXE proxy mode. In
PXE proxy mode, the set of options sent is defined by the PXE standard
and the normal set of options is not sent. This config allows arbitrary
options in PXE-proxy replies. A typical use-case is to send option
175 to iPXE. Thanks to Jason Berry for finding the requirement for
this.
Support PXE proxy-DHCP and DHCP-relay at the same time.
When using PXE proxy-DHCP, dnsmasq supplies PXE information to
the client, which also talks to another "normal" DHCP server
for address allocation and similar. The normal DHCP server may
be on the local network, but it may also be remote, and accessed via
a DHCP relay. This change allows dnsmasq to act as both a
PXE proxy-DHCP server AND a DHCP relay for the same network.
Fix erroneous "DNSSEC validated" state with non-DNSSEC
upstream servers. Thanks to Dominik Derigs for the bug report.
Handle queries with EDNS client subnet fields better. If dnsmasq
is configured to add an EDNS client subnet to a query, it is careful
to suppress use of the cache, since a cached answer may not be valid
for a query with a different client subnet. Extend this behaviour
to queries which arrive a dnsmasq already carrying an EDNS client
subnet.
Handle DS queries to auth zones. When dnsmasq is configured to
act as an authoritative server and has an authoritative zone
configured, and receives a query for that zone _as_forwarder_
it answers the query directly rather than forwarding it. This
doesn't affect the answer, but it saves dnsmasq forwarding the
query to the recursor upstream, which then bounces it back to dnsmasq
in auth mode. The exception should be when the query is for the root
of zone, for a DS RR. The answer to that has to come from the parent,
via the recursor, and will typically be a proof-of-non-existence
since dnsmasq doesn't support signed zones. This patch suppresses
local answers and forces forwarding to the upstream recursor for such
queries. It stops breakage when a DNSSEC validating client makes
queries to dnsmasq acting as forwarder for a zone for which it is
authoritative.
Implement "DNS-0x20 encoding", for extra protection against
reply-spoof attacks. Since DNS queries are case-insensitive,
it's possible to randomly flip the case of letters in a query
and still get the correct answer back.
This adds an extra dimension for a cache-poisoning attacker
to guess when sending replies in-the-blind since it's expected
that the legitimate answer will have the same pattern of upper
and lower case as the query, so any replies which don't can be
ignored as malicious. The amount of extra entropy clearly depends
on the number of a-z and A-Z characters in the query, and this
implementation puts a hard limit of 32 bits to make resource
allocation easy. This about doubles entropy over the standard
random ID and random port combination. This technique can interact
badly with rare broken DNS servers which don't preserve the case
of the query in their reply. The first time a reply is returned
which matches the query in all respects except case, a warning
will be logged. In this release, 0x020-encoding is default-off
and must be explicitly enabled with --do-0x20-encoding. In future
releases it may default on. You can avoid a future release
changing the behaviour of an installation with --no-x20-encode.
Fix a long-standing problem when two queries which are identical
in every repect _except_ case, get combined by dnsmasq. If
dnsmasq gets eg, two queries for example.com and Example.com
in quick succession it will get the answer for example.com from
upstream and send that answer to both requestors. This means that
the query for Example.com will get an answer for example.com, and
in the modern DNS, that answer may not be accepted.
Signed-off-by: Rudy Andram <rmandrad@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18357
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update ca-certificates to version 20241223
* Update Mozilla certificate authority bundle to version 2.70.
The following certificate authorities were added (+):
+ Telekom Security TLS ECC Root 2020
+ Telekom Security TLS RSA Root 2023
+ FIRMAPROFESIONAL CA ROOT-A WEB
+ TWCA CYBER Root CA
+ SecureSign Root CA12
+ SecureSign Root CA14
+ SecureSign Root CA15
The following certificate authorities were removed (-):
- Security Communication Root CA (closes: #1063093)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/18468
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix execution of initramfs image on NEC Aterm devices by increasing
available memory for lzma extraction of lzma-loader.
The size of initramfs image of v24.10.0 exceeds available memory
(LZMA_TEXT_START - LOADADDR) and loader data running at LZMA_TEXT_START
will be overwritten by extracted data. As a result, LZMA extraction will
be broken and stuck (or unexpectedly reset).
Fix that issue by setting higher LZMA_TEXT_START address to increase
available memory for LZMA extraction by lzma-loader.
log (v24.10.0):
boot> tftpd
tftpd start 192.168.0.1
boot> start tftp load openwrt-24.10.0-ath79-generic-ne
end tftp load length = 6569768
start memory load ...
memory load complete
begin : 0x80040000
length : 6567044
startup: 0x80040000
boot> boot
begin : 0x80040000
length : 6567044
startup: 0x80040000
option: 0x0
NEC Aterm series (QCA9558)
Calibrating SGMII
SGMII cal value = 0xe
Configuring SGMII force mode
SGMII_CONFIG : 0x000000a2
MR_AN_CONTROL: 0x00008140
MR_AN_CONTROL: 0x00000140
OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
Decompressing kernel... [:<syntax:value>]');retu <--- (stuck)
IPL:SOFT-RESET <--- (reset by WDT)
memory test ... ok
flinstall OK
boot version: 1.0.0
...
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18476
Signed-off-by: Robert Marko <robimarko@gmail.com>
The current CFLAGS (rv64imafdc) for the riscv64 targets do not contain
the full generic compute extension (g), as that also includes the
zicsr and zifencei extensions/instructions. Rename the default ISA to
'generic' to add distinction to the current binaries (although it's very
minimal), and use rv64gc for CFLAGS.
This is also a prep step for the upcoming gcv (vector-extension supporting)
targets like the Spacemit K1, and the thead-cores like the TH1520.
Compile-tested: all riscv64 targets
Runtime-tested:
- SiFive Unleashed (FU540)
- SiFive Unmatched (FU740)
- Nezha D1 (D1)
- VisionFive2 (JH7110)
Link: https://github.com/openwrt/openwrt/pull/18094
Tested-by: Chuanhong Guo <gch981213@gmail.com> # siflower target
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Now that all packages that relied on the skip mechanism are selected
via BUILD_DEVICES or by defaulting for the subtarget drop them from
individual DEVICE_PACKAGES so that Image Builder works again for armv7.
Fixes: #18411
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, ls-rcw package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b97 ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-rcw' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-rcw package in DEVICE_PACKAGES lets select it when
layerscape/armv7 target is selected.
Fixes: #18411
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Now that all packages that relied on the skip mechanism are selected
via BUILD_DEVICES or by defaulting for the subtarget drop them from
individual DEVICE_PACKAGES so that Image Builder works again for armv8_64b.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, ls-ddr-phy package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b97 ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-ddr-phy' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-ddr-phy package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, ls-dpl package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b97 ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-dpl' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-dpl package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
