Commit Graph

58582 Commits

Author SHA1 Message Date
Felix Fietkau
ddd012d5ff hostapd: fix AP+STA configuration with autochannel enabled
Properly disable the interface when requested
Disable ACS when bringing it back up on the new channel

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-13 12:36:55 +02:00
Felix Fietkau
1688c47e3e mac80211: disable automatically created sta interfaces
They are not useful for anything on the system and are annoying when a PHY
is disabled in the config

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-13 11:57:06 +02:00
Felix Fietkau
4871acef79 hostapd: update interface/bss list after set_config calls
set_config causes the ucode bss resource to be re-created and because of that
the bss list needs to be updated as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-13 10:47:35 +02:00
Felix Fietkau
2148579116 mac80211: add missing kernel modules for brcmfmac
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-13 09:45:56 +02:00
Michał Kwiatek
03306969f5 ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01890
Changelog from quic:

Bug fixes, stability improvements from previous releases
are present. There are no backward comatibility issues
with this release.

Known issues:
IPV6 connectivity problem, see: https://github.com/openwrt/openwrt/pull/13203#issuecomment-1666947749

Tested-by: Michał Kwiatek <michal@kwiatek.it> # Xiaomi AX3600
Signed-off-by: Michał Kwiatek <michal@kwiatek.it>
2023-09-12 23:39:04 +02:00
Brian Norris
7b78a19e6a ipq806x: Correct OnHub sysupgrade config logic
There's a typo in here: board_name is a function, not a variable. This
issue was pointed out on the OpenWrt forum.

Closes: 

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2023-09-12 23:36:30 +02:00
Felix Fietkau
20bd3502d3 mac80211: fix mesh id corruption on 32 bit systems
increase size of ifmsh->mbss_changed

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-12 15:35:24 +02:00
Aviana Cruz
46d673033b
ramips: add support for mtk eip93 crypto engine
Mediatek EIP93 Crypto engine is a crypto accelerator which
is available in the Mediatek MT7621 SoC.

Signed-off-by: Aviana Cruz <gwencroft@proton.me>
Co-authored-by: Richard van Schagen <vschagen@icloud.com>
Co-authored-by: Chukun Pan <amadeus@jmu.edu.cn>
2023-09-12 14:57:54 +02:00
Hannu Nyman
47d56ae546
base-files: sysupgrade: Add 2 sec sleep into process KILL loop
Add 2 seconds sleep after each forcibly killed/tried-to-kill process
in the final process termination loop in sysupgrade stage2.

This is needed especially for qualcommax/ipq807x, where ath11k
wireless driver may have a long 10-20 seconds delay after termination
before actually getting killed. This often breaks sysupgrade.

The current KILL loop in kill_remaining does all 10 kill attempts
consecutively without any delay, as evidenced here in a failing sysupgrade.
It does not allow any time for the process to finalize its internal
termination.

Sat Sep  2 19:05:56 EEST 2023 upgrade: Sending TERM to remaining processes ...
Sat Sep  2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2122)
Sat Sep  2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending KILL to remaining processes ...
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2122)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Failed to kill all processes.
sysupgrade aborted with return code: 256

The change in this commit adds a 2 seconds delay after each kill attempt
in order to allow some processes to more gracefully handle their
internal termination.

The result is like this:

Sun Sep  3 11:15:10 EEST 2023 upgrade: Sending TERM to remaining processes ...
Sun Sep  3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2309)
Sun Sep  3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2324)
Sun Sep  3 11:15:14 EEST 2023 upgrade: Sending KILL to remaining processes ...
Sun Sep  3 11:15:14 EEST 2023 upgrade: Sending signal KILL to hostapd (2309)
[  699.827521] br-lan: port 7(hn5wpa2r) entered disabled state
[  699.908673] device hn5wpa2r left promiscuous mode
[  699.908721] br-lan: port 7(hn5wpa2r) entered disabled state
[  701.038029] br-lan: port 6(hn5wpa3) entered disabled state
Sun Sep  3 11:15:16 EEST 2023 upgrade: Sending signal KILL to hostapd (2324)
[  702.058256] br-lan: port 5(hn2wlan) entered disabled state
[  709.250063] stage2 (8237): drop_caches: 3
Sun Sep  3 11:15:25 EEST 2023 upgrade: Switching to ramdisk...

The delay introduced here only kicks in if there is some process that
does not get terminated by the first TERM call. Then there is at least
one 2 sec wait after the first KILL loop round.

This commit is related to discussion in PRs  and 

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Reviewed-by: Robert Marko <robimarko@gmail.com>
2023-09-12 14:52:50 +02:00
Felix Fietkau
499ca4cbe0 hostapd: fix bringing up AP in AP+mesh configurations
Pass the correct frequency + secondary channel offset to hostapd

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-12 14:09:59 +02:00
Felix Fietkau
ea1787b7bc hostapd: clear ucode interface/bss resource pointers
Avoids potential use-after-free bugs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-12 14:09:58 +02:00
Felix Fietkau
36a9f8449c hostapd: fix applying gratuitous ARP settings with bridge-vlan
The arp_accept setting needs to be applied to the snoop_iface

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-12 12:58:26 +02:00
Felix Fietkau
42fda2f64e mac80211: add missing dependency for iwlwifi
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-12 11:18:45 +02:00
Jonas Gorski
09d13cd8d8 x86: geode: fix hwrng register accesses
When the membase and pci_dev pointer were moved to a new struct in priv,
the actual membase users were left untouched, and they started reading
out arbitrary memory behind the struct instead of registers. This
unfortunately turned the RNG into a constant number generator, depending
on the content of what was at that offset.

To fix this, update geode_rng_data_{read,present}() to also get the
membase via amd_geode_priv, and properly read from the right addresses
again.

Closes .

Reported-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Tested-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2023-09-11 21:34:16 +02:00
Felix Fietkau
e648e3ccf9 mac80211: fix build regressions on linux 6.1
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-11 18:54:13 +02:00
Daniel Golle
3b86c1f929 kernel: backport two fixes for MediaTek Ethernet driver
Fix PSE port assignment for 3rd GMAC on MT7988 and make sure dma_addr
is always initialized to prevent potentially accessing uninitialized
stack memory in the error path.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-09-11 14:09:48 +01:00
Felix Fietkau
f861292abc mac80211: update to version 6.5
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-11 14:29:36 +02:00
Piotr Dymacz
69f12c2f23 uboot-envtools: ramips: add support for ALFA Network AX1800RM
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2023-09-11 11:46:52 +02:00
Piotr Dymacz
f1aaa267f0 ramips: add support for ALFA Network AX1800RM
ALFA Network AX1800RM (FCC ID: 2AB877621) is a dual-band Wi-Fi 6
(AX1800) router, based on MediaTek MT7621A + MT79x5D platform.

Specifications:

- SOC:      MT7621A (880 MHz)
- DRAM:     DDR3 256 MiB (Nanya NT5CC128M16JR-EK)
- Flash:    16 MiB SPI NOR (EN25QH128A-104HIP)
- Ethernet: 4x 10/100/1000 Mbps (SOC's built-in switch)
- Wi-Fi:    2x2:2 2.4/5 GHz (MT7905DAN + MT7975DN)
            (MT7905DAN doesn't support background DFS scan/BT)
- LED:      6x green, 1x green/red
- Buttons:  2x (reset, WPS)
- Antenna:  4x external, non-detachable omnidirectional
- UART:     1x 4-pin (2.54 mm pitch, J4, not populated)
- Power:    12 V DC/1 A (DC jack)

MAC addresses:

LAN:     00:c0:ca:xx:xx:4e (factory 0x4, +2)
WAN:     00:c0:ca:xx:xx:4f (factory 0x4, +3)
2.4 GHz: 00:c0:ca:xx:xx:4c (factory 0x4, device's label)
5 GHz:   00:c0:ca:xx:xx:4c (factory 0xa)

Flash instructions for web-based U-Boot recovery:

1. Power the device with WPS button pressed and wait around 10 seconds.
2. Setup static IP 192.168.1.2/24 on your PC.
3. Go to 192.168.1.1 in browser and upload 'recovery' image.

The device runs LEDE 17.01 (kernel 4.4.x) based firmware with 'failsafe'
mode available which allows alternative upgrade method:

1. Run device in 'failsafe' mode and change password for default user.
2. SSH to the device, transfer 'sysupgrade' image and perform upgrade
   in forced mode, without preserving settings: 'sysupgrade -n -F ...'.

Other notes:

If you own early version of this device, the vendor firmware might
refuse OpenWrt image because of missing custom header. In that case,
ask vendor's customer support for stock firmware without custom header
support/requirement.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2023-09-11 11:41:57 +02:00
Daniel Golle
948ad2ec7a arm-trusted-firmware-mediatek: fix hang on reboot on MT7622
With recent updates of TF-A the previously already fixed bug slipped
back into the source tree. Again, reorder bl2 init for MT7622 and
initialize WDT only after DRAM init has completed to avoid the
notorious hang.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-09-10 23:47:38 +01:00
Daniel Golle
9725524235 uboot-mediatek: sync mtk-snand driver with SDK
Sync SPI-NAND/ECC controller driver for MT7622, MT7981, MT7986 and MT7988:
 * Platform data for MT7981 was actually missing and is now added.
 * Add support for Winbond W25N01KV 1Gbit chip.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-09-10 23:46:06 +01:00
David Bauer
7f54d9ba1a Revert "ath79: use kernel 6.1 as default"
This reverts commit c94383de01.

THis commit was not meant to be pushed to main yet.

Signed-off-by: David Bauer <mail@david-bauer.net>
2023-09-09 08:42:50 +02:00
John Audia
5294b358aa kernel: bump 6.1 to 6.1.52
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.52

All patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-09-09 02:15:15 +02:00
Tomasz Maciej Nowak
eac1928430 mvebu: cortexa72: enable USB PHY
Since kernel 5.13 this is needed to enable USB ports on all devices in
subtarget. Previously TF-A and COMPHY driver might have set up this PHY,
but not anymore.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Robert Marko <robimarko@gmail.com>
2023-09-08 23:49:00 +02:00
Tomasz Maciej Nowak
8e0d43d569 mvebu: refresh 6.1 configs
This should be a part of kernel major bump. Fortunately it didn't stall
compilation, so no fixes tag.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-09-08 23:49:00 +02:00
Patricia Lee
907e9e0bd3 mediatek: add support for Cetron CT3003
**Hardware specification:**

- SoC: MediaTek MT7981B 2x A53
- Flash: ESMT F50L1G41LB 128MB
- RAM: Nanya NT5CC128M16JR-EK 256MB
- Ethernet: 4 x 10/100/1000 Mbps
- Switch: MediaTek MT7531AE
- WiFi: MediaTek MT7976C
- Button: Reset, Mesh
- Power: DC 12V 1A
- UART: 3.3v, 115200n8
  | Layout:   |
  | :-------- |
  | <Antenna> |
  | VCC       |
  | GND       |
  | Tx        |
  | Rx        |

**Flash instructions:**

1. Rename `openwrt-mediatek-filogic-cetron_ct3003-squashfs-factory.bin` to `factory.bin`.
2. Upload the `factory.bin` using the device's Web interface.
3. Click the upgrade button and wait for the process to finish.
4. Access the OpenWrt interface using the same password.
5. Use the 'Restore' function to reset the firmware to its initial state.

**Notes:**

If you plan to recovery the stock firmware in the future, it's advisable
to connect the device via the serial port and enter failsafe mode to
back up all the MTD partitions before proceeding the steps above.

Signed-off-by: Patricia Lee <patricialee320@gmail.com>
2023-09-08 23:17:26 +02:00
John Audia
58bb5e147a kernel: bump 5.15 to 5.15.131
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.131

All patches automatically rebased.

Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-09-08 21:24:48 +02:00
David Bauer
c94383de01 ath79: use kernel 6.1 as default
Signed-off-by: David Bauer <mail@david-bauer.net>
2023-09-08 21:00:26 +02:00
Shiji Yang
aee2af0f74 ath79: enable variable sector size erasure for generic subtarget
Make use of minor sector size (4k) erasure on supported flash chips
to improve spi read/write performance.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-09-08 18:06:30 +02:00
Shiji Yang
7ba69a94f9 ath79: backport gpio immutable irq_chip support
This patch converts the driver to immutable irq-chip, which can
silence some gpio warnings.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-09-08 18:06:30 +02:00
Shiji Yang
54758cf24b ath79: ignore the abused interrupt-map on PCIe node
ath79 PCIe interrupt controller has stopped working correctly. This
is because the DT exposing a non-sensical interrupt-map property,
and their drivers relying on the kernel ignoring this property[1].

This patch fixes the PCIe init error:
ath9k 0000:00:00.0: of_irq_parse_pci: failed with rc=-14

Notice:
This is just a workaround, not a fix. PCIe driver and related dts
node need to be rewritten.

[1] https://lore.kernel.org/all/20211201114102.13446-1-maz@kernel.org/

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-09-08 18:06:30 +02:00
Shiji Yang
7189b45784 ath79: fix ethernet driver build errors on kernel 6.1
Some net APIs have changed on the new kernel. Update them to fix
compile errors.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-09-08 18:06:30 +02:00
Shiji Yang
5f59d28bc3 ath79: refresh patches and configs to introduce kernel 6.1 support
All kernel configs are refreshed by
'make kernel_oldconfig CONFIG_TARGET=target' and
'make kernel_oldconfig CONFIG_TARGET=subtarget'.

upstreamed patches:
010-v5.17-spi-ar934x-fix-transfer-and-word-delays.patch
011-v5.17-spi-ar934x-fix-transfer-size.patch
020-v5.18-spi-ath79-Implement-the-spi_mem-interface.patch
030-v5.18-ath79-add-support-for-booting-QCN550x.patch

build and run tested on:
ath79/generic/ar7241
ath79/generic/qca9563
ath79/nand/ar9344

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-09-08 18:06:30 +02:00
Shiji Yang
d9a9caf352 ath79: copy patches and kernel config from 5.15 to 6.1
This is preparation for kernel 6.1 support.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-09-08 18:06:30 +02:00
Shiji Yang
c60dd7bef9 ath79: rename and sort patches by OpenWrt naming rules
The patches in the ath79 target have not been sorted for a long time
and they are very chaotic now. This patch sorts them again according
to the OpenWrt naming rules[1], so that we can better manage them.

[1] https://openwrt.org/docs/guide-developer/toolchain/use-patches-with-buildsystem#naming_patches

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-09-08 18:06:30 +02:00
Shiji Yang
496280ef4e ath79: add missing symbols by refreshing kernel configs
Some symbols are outdated or missing due to daily kernel bumps. It's
better to re-add them. All configs are automatically refreshed by
'make kernel_oldconfig CONFIG_TARGET=taget' and
'make kernel_oldconfig CONFIG_TARGET=subtarget'

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-09-08 18:06:30 +02:00
Rafał Miłecki
703d667a0c kernel: switch back to fw_devlink=permissive
This reverts commit 5356462ce5.

Kernel switching to fw_devlink=on as default broke probing some devices.
Revert it until we get a proper fix.

It seemed that mtd OF_POPULATED hack resolved probing issues but
apparently not all of them. We got reports about reading MAC using NVMEM
not working and USB controllers not working.

Ref: 
Fixes: 
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2023-09-05 16:05:32 +02:00
Chen Minqiang
36746893ac mediatek: fix the name of buswidth to bus-width
Fix the issue of dts buswidth cannot be applied properly with spi driver.
Fix the name of buswidth to bus-width in dts in order to fit the format
in linux spi kernel[1] so that spi-tx-bus-width & spi-rx-bus-width can be
parsed properly.

[1] Documentation/devicetree/bindings/spi/spi-controller.yaml

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2023-09-05 15:40:43 +08:00
Jayantajit Gogoi
1b15cb21db rockchip: add support for Radxa ROCK Pi E
This adds support for Radxa ROCK Pi E, rockchip rk3328 board.

Specification:

- CPU: Rockchip RK3328 64-bit Quad-core
- RAM: DDR3 256MB ~ 2GB
- Network:
    1 x 10/100/1000M Ethernet
    1 x 10/100M Ethernet
- Storage:
    1 x MicroSD Slot
    1 x eMMC Module Slot
- USB Host/OTG:
    1 x USB3.0 Type A HOST
    1 x USB2.0 HOST (40-pin pin-header)
- Wireless
    RTL8723DU/RTL8821CU
- Debug Serial:
    1500000 baud at UART2 ( 40-pin pin-header)
- Power Supply:
    Type-C 5V
    Optionally PoE

Installation:
- Write image to SD Card or EMMC with dd
- Boot ROCK Pi E from the SD Card

Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
2023-09-05 00:20:51 +05:30
Jayantajit Gogoi
18b6bae851 uboot-rockchip: add suport for Radxa ROCK Pi E
Add uboot support for Radxa ROCK Pi E, rockchip rk3328 board.
Add pre-built files to fix swig dependencies.

Specification:

- CPU: Rockchip RK3328 64-bit Quad-core
- RAM: DDR3 256MB ~ 2GB
- Network:
    1 x 10/100/1000M Ethernet
    1 x 10/100M Ethernet
- USB Host:
    1 x USB3.0 Type A HOST
    1 x USB2.0 OTG (40-pin pin-header)
- Wireless:
    RTL8723DU/RTL8821CU
- Power Supply: Type-C 5V

Installation:
- Write image to SD Card or EMMC with dd
- Boot ROCK Pi E from the SD Card

Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
2023-09-05 00:20:51 +05:30
Felix Fietkau
77c45ddd86 kernel: backport support for renaming netdevs while up
Will be used in upcoming hostapd changes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-04 15:29:35 +02:00
Thomas Bong
8554a4a7e3 ipq40xx: compress kernel for Magic 2 WiFi next
The bootcmd limits the kernel to 4 MiB which is
exceeded when using Device/FitImage. Device/FitzImage
reduces the size to around 3 MiB.

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Bong <thomas.bong@devolo.de>
2023-09-03 23:11:51 +02:00
Thomas Bong
838bb0c03f ipq40xx: convert devolo Magic 2 WiFi next to DSA
Renamed the interfaces to match the other devices.
Name the interface connected to the builtin G.hn chip 'ghn'.
This might toggle at runtime while the G.hn chip is in the
bootloader.

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Bong <thomas.bong@devolo.de>
2023-09-03 23:11:40 +02:00
Hannu Nyman
6267961a4a tools/cmake: update to 3.27.4
Update cmake to 3.27.4
No patch refresh needed.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2023-09-03 23:07:16 +02:00
Yuu Toriyama
0e13363de6 wireless-regdb: update to 2023.09.01
Changes:
    9dc0800 wireless-regdb: Update regulatory rules for Philippines (PH)
    111ba89 wireless-regdb: Update regulatory rules for Egypt (EG) from March 2022 guidelines
    ae1421f wireless-regdb: Update regulatory info for Türkiye (TR)
    20e5b73 wireless-regdb: Update regulatory rules for Australia (AU) for June 2023
    991b1ef wireless-regdb: update regulatory database based on preceding changes

Signed-off-by: Yuu Toriyama <PascalCoffeeLake@gmail.com>
2023-09-03 23:06:09 +02:00
INAGAKI Hiroshi
5c65224d8f mvebu: add reset delays of PHYs for Fortinet FortiGate 50E
Add reset-(de)assert-us to ethernet PHYs on Fortinet FortiGate 50E to
solve instability after HW resetting of PHYs. (ex.: restarting "network"
service, etc...)

Fixes: 
Fixes: 102dc5a625 ("mvebu: add support for Fortinet FortiGate 50E")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2023-09-03 22:59:39 +02:00
John Audia
b4db76a5e5 kernel: bump 6.1 to 6.1.51
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.51

No patches needed a rebased.  Update to checksum only.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-09-03 13:40:14 +02:00
John Audia
e793b4bde5 kernel: bump 5.15 to 5.15.130
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.130

No patches needed a rebased. Update to checksum only.

Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-09-03 13:38:48 +02:00
Felix Fietkau
4a0b1af905 hostapd: allow adding initial AP without breaking STA interface connection
When switching from a STA-only configuration to AP+STA on the same phy, the
STA was previously restarted in order to notify hostapd of the new frequency,
which might not match the AP configuration.
Fix the STA restart by querying the operating frequency from within hostapd
when bringing up the AP.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-03 09:51:28 +02:00
Felix Fietkau
d65354488d hostapd: fix config change detection on boolean values
Check for null instead of truish value

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-03 09:51:08 +02:00