Commit Graph

1132 Commits

Author SHA1 Message Date
Daniel Golle
d0a2b3f824 mediatek: add Adtran SmartRG SDG-8733A
Specification is similar to other devices of the MT Stuart series:
 * Mediatek MT7988D (3x Cortex-A73, up to 1.8 GHz clock speed)
 * 8 GiB eMMC
 * 2 GiB DDR4 RAM
 * 2500M/1000M/100M LAN port
 * 10000M/5000M/2500M/1000M/100M/10M WAN port
 * MT7992 Tri-band (2.4G, 5G, 6G) 2T2R+3T3R+3T3R 802.11be Wi-Fi
 * Renesas DA14531MOD Bluetooth
 * 2 buttons (Reset, Mesh/WPS)
 * uC-controlled RGB LED via I2C
 * 2x LED for the 2.5G port, 3x LED for the 10G port
 * 3.3V-level 115200 baud UART console via 4-pin Dupont connector
   exposed at the bottom of the device
 * USB-C PD power input

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-09-20 22:47:05 +01:00
Daniel Golle
27be0f8565 mediatek: filogic: openwrt_one: let U-Boot set LAN MAC address
Instead of reading it from flash directly, let U-Boot assign the LAN
MAC address. Set label-mac-device while at it and sort aliases in DT
alphabetically.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-09-19 20:33:53 +01:00
Daniel Golle
72d88af43f mediatek: filogic: fix WiFi MAC address retrieval for Adtran SDG-8734
Fix a typo in the MAC address assignment script affecting SDG-8734.

Fixes: c71b68acdd ("mediatek: filogic: add Adtran SmartRG Mount Stuart series")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-09-19 14:37:56 +01:00
Daniel Golle
c4a9265160 mediatek: apply pending PHY driver fixes
Apply changes suggested by SkyLake Huang for pending series improving
MediaTek Ethernet PHY drivers.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-09-12 15:43:05 +02:00
John Crispin
ee798653f3 mediatek: fix OpenWrt One NAND size
The final version of the PCB has 256MB NAND instead of 128MB.

Signed-off-by: John Crispin <john@phrozen.org>
2024-09-10 17:23:04 +02:00
John Crispin
f5c42670d2 mediatek: fix OpenWrt One MACs
* Ignore the MACs passed by the bootloader.
* fix nvmem-cell-cells warning
* fix the node names
* add dbdc wifi MACs

Signed-off-by: John Crispin <john@phrozen.org>
2024-09-10 17:23:04 +02:00
John Audia
77886246e0 kernel: bump 6.6 to 6.6.49
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.49

All patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16328
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-09-06 22:36:43 +02:00
Yan Cangang
3de653a0af filogic: add missing 2.5G PHY LEDs configuration for Zyxel EX5700
configure 2.5G PHY LEDs to:

2500/1000: green with blink on TX/RX
100/10: green+yellow with blink on TX/RX

which is similar to other 1G PHY LEDs, which are:

1000: green with blink on TX/RX
100/10: green+yellow with blink on TX/RX

Fixes: 6cc14bf66a ("filogic: support Telenor branded ZyXEL EX5700")

Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16082
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-09-06 22:17:45 +02:00
Daniel Golle
5fa86a4e2b mediatek: mt7988a-rfb: align order of SFPs with SDK build
MediaTek SDK uses eth2 as additional LAN port and eth1 as WAN.
Do the same also in OpenWrt to keep settings aligned with the SDK.

Suggested-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-09-02 10:14:20 +02:00
John Audia
93cca95434 kernel: bump 6.6 to 6.6.48
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.48

Removed upstreamed:
	generic/backport-6.6/752-04-v6.6-net-ethernet-mtk_wed-check-update_wo_rx_stats-in-mtk.patch[1]
	generic/pending-6.6/601-udp-fix-receiving-fraglist-GSO_packets.patch[2]
	mediatek/patches-6.6/951-net-ethernet-mtk_wed-fix-use-after-free-panic-in-mtk.patch[3]
	rockchip/patches-6.6/302-mmc-allow-probe-to-defer-if-clock-is-not-ready.patch[4]

Manually rebased:
	bcm27xx/patches-6.6/950-0058-Revert-Bluetooth-Always-request-for-user-confirmatio.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.48&id=7ede6ef04c9ffc466844a297d3d68bea8a06093d
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.48&id=cfa692e7e71b22d35174a796d10b9111bafa0686
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.48&id=326a89321f9d5fe399fe6f9ff7c0fc766582a6a0
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.48&id=7bbf8f8b8861dd2a6215f1aded425c66e6c376a0

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16282
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-31 20:08:13 +02:00
Daniel Golle
dd1bfbe971 mediatek: phase out uImage.FIT partition parser
All boards using the deprecated uImage.FIT partition parser have
been migrated to the new fitblk driver. Drop the now no longer
needed partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:52 +01:00
Daniel Golle
688239d91e mediatek: filogic: convert Zyxel EX5601-T0 to fitblk
Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:51 +01:00
Daniel Golle
ca4f5b0def mediatek: filogic: convert Netcore N60 to fitblk
Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:51 +01:00
Daniel Golle
d657ca6760 mediatek: filogic: convert Xiaomi WR30U to fitblk
Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:51 +01:00
Daniel Golle
c29ab486a8 mediatek: filogic: convert Xiaomi AX3000T to fitblk
Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:51 +01:00
Daniel Golle
ee7aacb3e7 mediatek: filogic: convert Qihoo 360T7 to fitblk
Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:51 +01:00
Daniel Golle
609f29da62 mediatek: filogic: convert JCG Q30 PRO to fitblk
Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:51 +01:00
Daniel Golle
52ef01672c mediatek: filogic: convert H3C Magic NX30 Pro to fitblk
Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:51 +01:00
Daniel Golle
ffd5cca73e mediatek: filogic: convert MT7981 RFB to fitblk
Use fitblk driver instead of deprecated uImage.FIT partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-28 15:11:51 +01:00
Pawel Dembicki
19d770d7b9 mediatek: filogic: add support for Cudy AP3000 Outdoor
Hardware highlights:
  - MediaTek MT7981 WiSoC
  - 256MB DDR3 RAM
  - 64MB SPI-NAND
  - MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
  - 1x LED in two colors
  - 2x Button
  - 1x 1GbE
  - Two detachable antenas, two internal pcb antenas
  - PoE powered (standalone)

MAC:
LAN MAC: label mac
2.4G MAC: label mac -1
5G MAC: label mac

How to install:
1. Apply Cudy Intermediate OpenWrt image for AP3000 Outdoor V1
2. Install OpenWrt sysupgrade image

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16156
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-25 15:35:53 +02:00
Goetz Goerisch
3774f3272e treewide: rename ZyXEL to Zyxel
The company Zyxel rebranded some years ago.
Currently the casing is according to the old branding even
for newer devices which already use the new branding.

This commit aligns the casing of Zyxel everywhere.

Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15652
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-25 15:08:25 +02:00
Rany Hany
fca306c563 mediatek/mt7622: fix config symbol for 2.5GE MTK driver
The commit backporting new MTK patches did not update the
Kernel config for mediatek/mt7622 causing the build to
fail.

Simply use the new config symbol name for the driver to
fix the issue.

Fixes: 1069514978 ("mediatek: backport pending Ethernet PHY driver patches")
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/16225
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-08-22 11:42:34 +02:00
Daniel Golle
1069514978 mediatek: backport pending Ethernet PHY driver patches
Use pending patchset for 2.5GE PHY driver, unifying LED handling
accross all MediaTek Ethernet PHYs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-22 00:20:02 +01:00
John Audia
3eb08538c4 kernel: bump 6.6 to 6.6.46
This commit makes three changes all needed for the update of the 6.6 kernel.

1. Upstream kernel bump to 6.6.46

	Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.46
	Manually rebased:
        	bcm27xx/patches-6.6/950-0320-spi-spidev-Restore-loading-from-Device-Tree.patch
	All other patches automatically rebased.

2. Adjusted the following for new ksym[1] enabling it:

        armsr/config-6.6
        bcm27xx/bcm2712/config-6.6

3. Added a fix to receiving fraglist GSO packets:

	generic/pending-6.6/601-udp-fix-receiving-fraglist-GSO_packets.patch[2]

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/arm64/Kconfig?id=v6.6.46&id2=v6.6.45
2. https://marc.info/?l=linux-netdev&m=172407994500599&w=2

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16173
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-20 23:41:08 +02:00
Roland Reinl
2fbffb3643 mediatek: Add support for Linksys EA7500 v3
Specification:
- MT7629 CPU
- MT7531 switch
- MT7761N and MT7762N wifi
- 256 MB RAM
- 128 MB NAND flash with dual-boot partitions
- 2 buttons: WPS and reset
- 1 WAN port (1G)
- 4 LAN ports (1G)
- 1 USB port

Limitations (same as other MT7629/MT7761N/MT7762N devices):
- Wifi is not working
- Second core is not working (kernel error message "CPU1: failed to come online")

Disassembly:
- There are two screws under the front rubber feet and two under the label on the bottom (in the corners towards the back, you should be able to feel them).

Serial Interface:
- UART pin header is already soldered on the board. Pinning from front to back:
1 - VCC
2 - TX
3 - RX
4 - n/a
5 - GND

GPIO:
- 1 white LED, connected to GPIO 52
- 1 reset button, connected to GPIO 60
- 1 WPS button, connected to GPIO 58

MAC Adresses:
- The MAC address printed on the device label is used for LAN and WAN
- The MAC address is stored in the devinfo partition in ASCII format (hw_mac_addr=aa:bb:cc:dd:ee)
- 2.4 GHz wifi uses MAC of the device label + 1
- 5 GHz wifi uses MAC of the device label + 2

Flashing:
- OpenWrt is only runnig in the first partition of dual boot
- To ensure to be able to go back to the factory image, flash the last OEM firmware via OEM web interface. This will ensure that the OEM firmware is present on both partitions
- Because of dual boot partitions, flashing via OEM interface is not supported
- Start a TFTP server and provide the initramfs image. Default settings:
  - Router IP: 192.168.1.1
  - TFTP server IP: 192.168.1.100
  - TFTP file name: 7531.bin
- Open the device, connect UART and select " 1. System Load Linux to SDRAM via TFTP." during startup
- Adapt the settings to your environment, if required
- After initramfs is booted, flash the sysupgrade image

Return to OEM firmware:
- Run the following commands in OpenWrt to switch to the second partition
  fw_setenv boot_part 2
  fw_setenv bootimage 2
- Reboot the device. OEM firmware will start up again

Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16067
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-15 00:13:20 +02:00
Daniel Golle
0308b254d1 mediatek: mt7623: get rid of fitblk_get_bootdev
Also migrate mt7623 to new fitblk support scripts which simplify
sysupgrade when using uImage.FIT. This had been forgotten previously.

Fixes: 4448d6325f ("mediatek: make use of common uImage.FIT upgrade functions")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-12 19:20:49 +01:00
Zheng Zhang
9f8599aebe mediatek: fix a use-after-free kernel panic in wed code
Fix a use-after-free bug in mtk_wed_setup_tc_block_cb()
which leads to kernel panic when setup multiple ap
interfaces on one band of mt798x.

Signed-off-by: Zheng Zhang <everything411@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16118
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-08-12 19:39:55 +02:00
Daniel Golle
8cf9a932fa mediatek: add script to trigger scrubbing of FIP-in-UBI
Read the 'fip' static volume in order to trigger scrubbing in case of
detecting flipped bits while reading.
We have to do this in Linux because we never read or touch the 'fip'
volume and the UBISPL implementation in ARM TrustedFirmware-A does NOT
handle scrubbing itself.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-12 11:31:37 +01:00
Daniel Golle
1554af4c43 generic: import patch lowering bitflip_threshold on SPI-NAND
Reporting an unclean read from SPI-NAND only when the maximum number
of correctable bitflip errors has been hit seems a bit late.
UBI LEB scrubbing, which depends on the lower MTD device reporting
correctable bitflips, then only kicks in when it's almost too late.

Set bitflip_threshold to 75% of the ECC strength, which is also the
default for raw NAND.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-12 11:31:37 +01:00
Robert Marko
2b443497c2
mediatek: EAP111: add label-mac-device
Add the label-mac-device alias so that label MAC is set and can later
be used in userspace.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2024-08-10 18:00:14 +02:00
Tianling Shen
d1954aa535 mediatek: increase phy assert time for jdcloud re-cp-03
According to RTL8221B's datasheet, the PHY requires at least 10ms
for assert and 68ms (recommended) for de-assert. So increase the
assert/de-assert time to 15ms and 68ms respectively.

Fixes: c0c3234e17 ("mediatek: add support for JDCloud RE-CP-03")
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/16106
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-08 20:00:12 +02:00
Robert Marko
a8ecd8a909 mediatek: refresh patches
CI says patches need to be refreshed, so do so.

Fixes: 6bb334c5cf ("mediatek: fix u-boot env layout NVMEM definitions")
Link: https://github.com/openwrt/openwrt/pull/16051
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-08-02 12:12:46 +02:00
Daniel Golle
9778174086 generic: 6.6: update block nvmem patchset
While discussions are still ongoing, update the block NVMEM provider
patchset to the level submitted upstream to allow testing and validation.

Link: https://patchwork.kernel.org/project/linux-block/list/?series=875202
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-08-01 20:48:24 +01:00
Enrico Mioso
6bb334c5cf mediatek: fix u-boot env layout NVMEM definitions
s/u-boot,env-layout/u-boot,env/g

Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
2024-08-01 17:31:23 +02:00
John Audia
d2626bd2a7 kernel: bump 6.6 to 6.6.42
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.42

Removed upstreamed:
	bcm27xx/patches-6.6/950-0490-input-ads7846-Add-missing-spi_device_id-strings.patch[1]

All patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.42&id=528466f921aa7637bca684ce2d7d62cdb2c34013

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16010
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-28 19:46:16 +02:00
Chukun Pan
73832e1a48 mediatek: add support for TP-Link TL-XTR8488
Hardware specification:
  SoC: MediaTek MT7986A 4x A53
  Flash: ESMT F50L1G41LB 128MB
  RAM: MT40A512M16TB-062ER 1GB
  Ethernet: 2x 2.5G, 4x 1G Lan
  WiFi1: MT7976GN 2.4GHz 4T4R
  WiFi2: MT7976AN 5.2GHz 4T4R
  WiFi3: MT7915AN 5.8GHz 4T4R
  Button: Reset, WPS, Turbo
  USB: 1 x USB 3.0
  Power: DC 12V 5A

Flash instructions:
  1. Execute the following operation to open nc shell:
     https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting
  2. Replace the stock bootloader to OpenWrt's:
     dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin
     dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip
  3. Connect to your PC via the Gigabit port of the router,
     set a static ip on the ethernet interface of your PC.
  4. Download the initramfs image, and restart the router,
     waiting for tftp recovery to complete.
  5. After openwrt boots up, perform sysupgrade.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/15930
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-25 22:54:16 +02:00
Rafał Miłecki
74879140a1 treewide: fixup models names for UniFi U6 series
Ubiquiti has a set of UniFi 802.11ax (Wi-Fi 6) AP devices. All models
include "U6" in their names and also have code names with no special
characters (including spaces).

Examples:
1. U6 Lite (codename U6-Lite)
2. U6 Long-Range (codename U6-LR)
3. U6+ (codename U6-PLUS)
4. U6 Pro (codename U6-Pro)
5. U6 Mesh (codename U6-Mesh)
6. U6 Mesh Pro (codename U6-Mesh-Pro)
7. U6 Enterprise (codename U6-Enterprise)

Use proper full names for those devices. Names in OpenWrt/DTS code may
need updating too but it can be handled later.

Cc: Elbert Mai <code@elbertmai.com>
Cc: Daniel Golle <daniel@makrotopia.org>
Cc: Henrik Riomar <henrik.riomar@gmail.com>
Cc: David Bauer <mail@david-bauer.net>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-07-25 11:18:25 +02:00
Luca Piccirillo
7390642237 treewide: match the COMFAST brand name across supported devices
COMFAST CF-E393AX
COMFAST CF-E390AX & CF-EW72 V2
COMFAST CF-WR617AC

Signed-off-by: Luca Piccirillo <luca.piccirillo@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14690
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-21 18:08:49 +02:00
Tianling Shen
f2f428c699 mediatek: add ABT ASR3000 support
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: 128 MB SPI-NAND
  RAM: 256MB
  Ethernet: 4x 10/100/1000 Mbps
  Switch: MediaTek MT7531AE
  WiFi: MediaTek MT7976C
  Button: Reset, Mesh
  Power: DC 12V 1A

Gain telnet access:
1. Login into web interface, and download the configuration.
2. Decode and uncompress the configuration:
     * Enter fakeroot if you are not login as root.
   base64 -d e-xxxxxxxxxxxx-cfg.tar.gz | tar -zx
3. Edit 'etc/passwd', remove root password: 'root::1:0:99999:7:::'.
4. Edit 'etc/rc.local', insert telnetd command before 'exit 0':
   ( sleep 3s; /usr/sbin/telnetd; ) &
5. Repack the configuration:
   tar -zc etc/ | base64 > e-xxxxxxxxxxxx-cfg.tar.gz
6. Upload new configuration via web interface, now you can connect to
   ASR3000 via telnet.

Flash instructions:
1. Connect to ASR3000, backup everything, especially 'Factory' part.
2. Write new BL2:
   mtd write openwrt-mediatek-filogic-abt_asr3000-preloader.bin BL2
3. Write new FIP:
   mtd write openwrt-mediatek-filogic-abt_asr3000-bl31-uboot.fip FIP
4. Set static IP on your PC:
   IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/15887
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-21 16:13:06 +02:00
Tianling Shen
39c824f846 mediatek: switch to fitblk for cmcc rax3000m
Use the new fitblk driver.

Tested-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-07-18 13:20:58 +01:00
Tianling Shen
eb510d2158 mediatek: convert eeprom/macaddr to nvmem format for cmcc rax3000m
Switch to new nvmem binding.

Also fixes a issue that the MAC address assigned to lan/wan was
reversed on eMMC boards.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-07-18 13:20:58 +01:00
Daniel Golle
b39375ae4c mediatek: fix platform_copy_config()
Also use env variables exported by export_fitblk_rootdev() in
platform_copy_config().

Fixes: 4448d6325f ("mediatek: make use of common uImage.FIT upgrade functions")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-07-18 13:05:46 +01:00
Daniel Golle
4448d6325f mediatek: make use of common uImage.FIT upgrade functions
Use newly introduced fit_do_upgrade() function in /lib/upgrade/platform.sh.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-07-18 11:48:53 +01:00
Chad Monroe
2225844392 mediatek: filogic: disable eMMC HS400 mode for Mount Stuart series
The eMMC chip used in a small batch of these devices has issues operating
in HS400 mode. Reducing to HS200 mode works around the problem and does
not cause any noticeable performance penalties as smaller chips are not fast
enough to saturate the bus. Root cause analysis is pending.

Signed-off-by: Chad Monroe <chad@monroe.io>
2024-07-15 10:47:57 -07:00
John Audia
a9818e3ef8 kernel: bump 6.6 to 6.6.39
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.39

Manually rebased:
	generic/backport-6.6/0080-v6.9-smp-Avoid-setup_max_cpus_namespace_collision_shadowing.patch

Removed upstreamed:
	generic/backport-6.6/801-v6.11-gpio-mmio-do-not-calculate-bgpio_bits-via-ngpios.patch[1]
	generic/backport-6.6/0081-v6.10-cpu-Fix-broken-cmdline-nosmp-and-maxcpus-0.patch[2]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.39&id=dee87316b5f5f167a201491a774bbd6e10c8dd94
2. 69787793e7

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15928
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-15 01:26:47 +02:00
Daniel Golle
6234500298 mediatek: add BPi-R3 mini to platform_check_image()
Add entry for the BananaPi R3 mini to the platform_check_image()
function where it has been missing.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-07-14 19:45:21 +01:00
Qingfang Deng
2ded54972e mediatek: fit: fix use of uninitialized variable
When building the kernel with -Wmaybe-uninitialized, GCC reports this
warning:

block/partitions/fit.c: In function 'parse_fit_partitions':
block/partitions/fit.c:164:3: warning: 'images' may be used uninitialized in this function [-Wmaybe-uninitialized]
  164 |   printk(KERN_ERR "FIT: Cannot find %s node: %d\n", FIT_CONFS_PATH, images);
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

It appears to be a copy paste error. It's the "config" variable that is
supposed to be printed.

Fixes: e6aac8d98f ("image: add support for building FIT image with filesystem")
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
2024-07-07 20:59:48 +08:00
Daniel Golle
680944ce88 mediatek: filogic: openwrt,one: remove unneeded caldata extraction
WiFi calibration data is already obtained via in-kernel NVMEM framework.
There is no need to also do so in userspace.

Fixes: dd58ad968a ("mediatek/filogic: add OpenWrt One support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-07-05 03:52:48 +01:00
Daniel Golle
05eb6d0ad2 mediatek: filogic: add missing ';;' in /etc/board.d/01_leds
Add missing ';;' to terminate switch-case script generating
board-specific LED configuration defaults.

Fixes: c71b68acdd ("mediatek: filogic: add Adtran SmartRG Mount Stuart series")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-07-05 03:49:44 +01:00
Dirk Buchwalder
9e49593ff7 mediatek: filogic: add support for TP-LINK RE6000XD
This commit adds support for TP-LINK RE6000XD.
The device is quite similar to the Mercusys MR90X V1,
except only 3 LAN ports and more LEDs.
So thanks to csharper2005 for doing all the groundwork.

Device specification
--------------------
SoC Type:   MediaTek MT7986BLA, Cortex-A53, 64-bit
RAM:        MediaTek MT7986BLA (512MB)
Flash:      SPI NAND GigaDevice (128 MB)
Ethernet:   MediaTek MT7531AE + 2.5GbE MaxLinear GPY211C0VC (SLNW8)
Ethernet:   1x2.5Gbe (LAN3 2.5Gbps), 2xGbE (LAN 1Gbps, LAN1,
            LAN2)
WLAN 2g:    MediaTek MT7975N, b/g/n/ax, MIMO 4x4
WLAN 5g:    MediaTek MT7975P(N), a/n/ac/ax, MIMO 4x4
LEDs:       8 LEDs, 1 status blue, 2x WIFI blue, 2x signal
	    blue/red, 3 LAN blue gpio-controlled
Button:     2 (Reset, WPS)
USB ports:  No
Power:      12 VDC, 2 A
Connector:  Barrel
Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, ubi0
            partition contain "seconduboot" (also U-Boot 2022.01-rc4)

Serial console (UART), unpopulated
---------------------
                            V
+-------+-------+-------+-------+
| +3.3V |  GND  |  TX   |  RX   |
+---+---+-------+-------+-------+
    |
    +--- Don't connect

Disassemble: rm the 2 screws at the bottom and the one at the backside.
            un-clip the case starting at the edge above the LEDs.

Installation (UART)
-------------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
   pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
      tftpboot openwrt-mediatek-filogic-tplink_re6000xd-initramfs-kernel.bin bootm
4. Run 'sysupgrade -n' with the sysupgrade OpenWrt image

Notice: while I was successfull at activating ssh (as described
        here:
        https://www.lisenet.com/2023/gaining-ssh-access-to-tp-link-re200-wi-fi-range-extender/)

        Unfortunately I haven't found the correct root password.
        Looks like they are using a static password
        (md5crypt, salt + 21 characters) that is not the web
        interface admin password.

        The TP-LINK RE900XD looks like the very same device,
        according to the pictures and the firmware.
        But I haven't checked if the OpenWrt firmware works as well
        on that device.

        The second ubi partition (ubi1) is empty and there is no known
        dual-partition mechanism, neither in u-boot nor in the stock firmware.

Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
2024-07-04 22:14:32 +02:00