ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 05:38:00 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

mediatek: backport pending Ethernet PHY driver patches

Browse Source 
Use pending patchset for 2.5GE PHY driver, unifying LED handling
accross all MediaTek Ethernet PHYs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Daniel Golle 2024-08-20 17:20:29 +01:00
parent 963be1423f
commit 1069514978
17 changed files with 6423 additions and 361 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
View File

@ -1490,6 +1490,23 @@
compatible = "ethernet-phy-ieee802.3-c45";
reg = <15>;
phy-mode = "internal";
leds {
#address-cells = <1>;
#size-cells = <0>;
i2p5gbe_led0: i2p5gbe-led0@0 {
reg = <0>;
function = LED_FUNCTION_LAN;
status = "disabled";
};
i2p5gbe_led1: i2p5gbe-led1@1 {
reg = <1>;
function = LED_FUNCTION_LAN;
status = "disabled";
};
};
};
};
};

321
target/linux/mediatek/files-6.6/drivers/net/phy/mediatek-2p5ge.c
View File

@ -1,321 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
#include <linux/bitfield.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/consumer.h>
#include <linux/phy.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#define MT7988_2P5GE_PMB "mediatek/mt7988/i2p5ge-phy-pmb.bin"
#define MD32_EN BIT(0)
#define PMEM_PRIORITY BIT(8)
#define DMEM_PRIORITY BIT(16)
#define BASE100T_STATUS_EXTEND 0x10
#define BASE1000T_STATUS_EXTEND 0x11
#define EXTEND_CTRL_AND_STATUS 0x16
#define PHY_AUX_CTRL_STATUS 0x1d
#define PHY_AUX_DPX_MASK GENMASK(5, 5)
#define PHY_AUX_SPEED_MASK GENMASK(4, 2)
/* Registers on MDIO_MMD_VEND1 */
#define MTK_PHY_LINK_STATUS_MISC 0xa2
#define MTK_PHY_FDX_ENABLE BIT(5)
#define MTK_PHY_LPI_PCS_DSP_CTRL 0x121
#define MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK GENMASK(12, 8)
/* Registers on MDIO_MMD_VEND2 */
#define MTK_PHY_LED0_ON_CTRL 0x24
#define MTK_PHY_LED0_ON_LINK1000 BIT(0)
#define MTK_PHY_LED0_ON_LINK100 BIT(1)
#define MTK_PHY_LED0_ON_LINK10 BIT(2)
#define MTK_PHY_LED0_ON_LINK2500 BIT(7)
#define MTK_PHY_LED0_POLARITY BIT(14)
#define MTK_PHY_LED1_ON_CTRL 0x26
#define MTK_PHY_LED1_ON_FDX BIT(4)
#define MTK_PHY_LED1_ON_HDX BIT(5)
#define MTK_PHY_LED1_POLARITY BIT(14)
#define MTK_EXT_PAGE_ACCESS 0x1f
#define MTK_PHY_PAGE_STANDARD 0x0000
#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
struct mtk_i2p5ge_phy_priv {
bool fw_loaded;
};
enum {
PHY_AUX_SPD_10 = 0,
PHY_AUX_SPD_100,
PHY_AUX_SPD_1000,
PHY_AUX_SPD_2500,
};
static int mtk_2p5ge_phy_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
}
static int mtk_2p5ge_phy_write_page(struct phy_device *phydev, int page)
{
return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
}
static int mt7988_2p5ge_phy_probe(struct phy_device *phydev)
{
struct mtk_i2p5ge_phy_priv *phy_priv;
phy_priv = devm_kzalloc(&phydev->mdio.dev,
sizeof(struct mtk_i2p5ge_phy_priv), GFP_KERNEL);
if (!phy_priv)
return -ENOMEM;
phydev->priv = phy_priv;
return 0;
}
static int mt7988_2p5ge_phy_config_init(struct phy_device *phydev)
{
int ret, i;
const struct firmware *fw;
struct device *dev = &phydev->mdio.dev;
struct device_node *np;
void __iomem *pmb_addr;
void __iomem *md32_en_cfg_base;
struct mtk_i2p5ge_phy_priv *phy_priv = phydev->priv;
u16 reg;
struct pinctrl *pinctrl;
if (!phy_priv->fw_loaded) {
np = of_find_compatible_node(NULL, NULL, "mediatek,2p5gphy-fw");
if (!np)
return -ENOENT;
pmb_addr = of_iomap(np, 0);
if (!pmb_addr)
return -ENOMEM;
md32_en_cfg_base = of_iomap(np, 1);
if (!md32_en_cfg_base)
return -ENOMEM;
ret = request_firmware(&fw, MT7988_2P5GE_PMB, dev);
if (ret) {
dev_err(dev, "failed to load firmware: %s, ret: %d\n",
MT7988_2P5GE_PMB, ret);
return ret;
}
reg = readw(md32_en_cfg_base);
if (reg & MD32_EN) {
phy_set_bits(phydev, 0, BIT(15));
usleep_range(10000, 11000);
}
phy_set_bits(phydev, 0, BIT(11));
/* Write magic number to safely stall MCU */
phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800e, 0x1100);
phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800f, 0x00df);
for (i = 0; i < fw->size - 1; i += 4)
writel(*((uint32_t *)(fw->data + i)), pmb_addr + i);
release_firmware(fw);
writew(reg & ~MD32_EN, md32_en_cfg_base);
writew(reg | MD32_EN, md32_en_cfg_base);
phy_set_bits(phydev, 0, BIT(15));
dev_info(dev, "Firmware loading/trigger ok.\n");
phy_priv->fw_loaded = true;
}
/* Setup LED */
/* Set polarity of led0 to active-high for BPI-R4 */
phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
MTK_PHY_LED0_POLARITY);
phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
MTK_PHY_LED0_ON_LINK10 |
MTK_PHY_LED0_ON_LINK100 |
MTK_PHY_LED0_ON_LINK1000 |
MTK_PHY_LED0_ON_LINK2500);
phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
MTK_PHY_LED1_ON_FDX | MTK_PHY_LED1_ON_HDX);
pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "i2p5gbe-led");
if (IS_ERR(pinctrl)) {
dev_err(&phydev->mdio.dev, "Fail to set LED pins!\n");
return PTR_ERR(pinctrl);
}
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LPI_PCS_DSP_CTRL,
MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK, 0);
/* Enable 16-bit next page exchange bit if 1000-BT isn't advertizing */
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
__phy_write(phydev, 0x11, 0xfbfa);
__phy_write(phydev, 0x12, 0xc3);
__phy_write(phydev, 0x10, 0x87f8);
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
return 0;
}
static int mt7988_2p5ge_phy_config_aneg(struct phy_device *phydev)
{
bool changed = false;
u32 adv;
int ret;
if (phydev->autoneg == AUTONEG_DISABLE) {
/* Configure half duplex with genphy_setup_forced,
* because genphy_c45_pma_setup_forced does not support.
*/
return phydev->duplex != DUPLEX_FULL
? genphy_setup_forced(phydev)
: genphy_c45_pma_setup_forced(phydev);
}
ret = genphy_c45_an_config_aneg(phydev);
if (ret < 0)
return ret;
if (ret > 0)
changed = true;
adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
ret = phy_modify_changed(phydev, MII_CTRL1000,
ADVERTISE_1000FULL | ADVERTISE_1000HALF,
adv);
if (ret < 0)
return ret;
if (ret > 0)
changed = true;
return genphy_c45_check_and_restart_aneg(phydev, changed);
}
static int mt7988_2p5ge_phy_get_features(struct phy_device *phydev)
{
int ret;
ret = genphy_read_abilities(phydev);
if (ret)
return ret;
/* We don't support HDX at MAC layer on mt7988.
* So mask phy's HDX capabilities, too.
*/
linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
return 0;
}
static int mt7988_2p5ge_phy_read_status(struct phy_device *phydev)
{
int ret;
ret = genphy_update_link(phydev);
if (ret)
return ret;
phydev->speed = SPEED_UNKNOWN;
phydev->duplex = DUPLEX_UNKNOWN;
phydev->pause = 0;
phydev->asym_pause = 0;
if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
ret = genphy_c45_read_lpa(phydev);
if (ret < 0)
return ret;
/* Read the link partner's 1G advertisement */
ret = phy_read(phydev, MII_STAT1000);
if (ret < 0)
return ret;
mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
} else if (phydev->autoneg == AUTONEG_DISABLE) {
linkmode_zero(phydev->lp_advertising);
}
ret = phy_read(phydev, PHY_AUX_CTRL_STATUS);
if (ret < 0)
return ret;
switch (FIELD_GET(PHY_AUX_SPEED_MASK, ret)) {
case PHY_AUX_SPD_10:
phydev->speed = SPEED_10;
break;
case PHY_AUX_SPD_100:
phydev->speed = SPEED_100;
break;
case PHY_AUX_SPD_1000:
phydev->speed = SPEED_1000;
break;
case PHY_AUX_SPD_2500:
phydev->speed = SPEED_2500;
break;
}
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC);
if (ret < 0)
return ret;
phydev->duplex = (ret & MTK_PHY_FDX_ENABLE) ? DUPLEX_FULL : DUPLEX_HALF;
/* FIXME: The current firmware always enables rate adaptation mode. */
phydev->rate_matching = RATE_MATCH_PAUSE;
return 0;
}
static int mt7988_2p5ge_phy_get_rate_matching(struct phy_device *phydev,
phy_interface_t iface)
{
return RATE_MATCH_PAUSE;
}
static struct phy_driver mtk_gephy_driver[] = {
{
PHY_ID_MATCH_MODEL(0x00339c11),
.name = "MediaTek MT798x 2.5GbE PHY",
.probe = mt7988_2p5ge_phy_probe,
.config_init = mt7988_2p5ge_phy_config_init,
.config_aneg = mt7988_2p5ge_phy_config_aneg,
.get_features = mt7988_2p5ge_phy_get_features,
.read_status = mt7988_2p5ge_phy_read_status,
.get_rate_matching = mt7988_2p5ge_phy_get_rate_matching,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = mtk_2p5ge_phy_read_page,
.write_page = mtk_2p5ge_phy_write_page,
},
};
module_phy_driver(mtk_gephy_driver);
static struct mdio_device_id __maybe_unused mtk_2p5ge_phy_tbl[] = {
{ PHY_ID_MATCH_VENDOR(0x00339c00) },
{ }
};
MODULE_DESCRIPTION("MediaTek 2.5Gb Ethernet PHY driver");
MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(mdio, mtk_2p5ge_phy_tbl);
MODULE_FIRMWARE(MT7988_2P5GE_PMB);

2
target/linux/mediatek/filogic/config-6.6
View File

@ -240,7 +240,7 @@ CONFIG_MAXLINEAR_GPHY=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
CONFIG_MEDIATEK_2P5G_PHY=y
CONFIG_MEDIATEK_2P5GE_PHY=y
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MEDIATEK_GE_SOC_PHY=y
CONFIG_MEDIATEK_WATCHDOG=y

3513
target/linux/mediatek/patches-6.6/733-01-net-phy-mediatek-Re-organize-MediaTek-ethernet-phy-d.patch Normal file
View File

File diff suppressed because it is too large Load Diff

62
target/linux/mediatek/patches-6.6/733-02-net-phy-mediatek-Fix-spelling-errors-and-rearrange-v.patch Normal file
View File

@ -0,0 +1,62 @@
From 12054d38fc55adbfa2b40299ad8af3449d882ee2 Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:06 +0800
Subject: [PATCH 02/13] net: phy: mediatek: Fix spelling errors and rearrange
variables
This patch fixes spelling errors which comes from mediatek-ge-soc.c and
rearrange variables with reverse Xmas tree order.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge-soc.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -408,16 +408,17 @@ static int tx_offset_cal_efuse(struct ph
static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
{
- int i;
- int bias[16] = {};
- const int vals_9461[16] = { 7, 1, 4, 7,
- 7, 1, 4, 7,
- 7, 1, 4, 7,
- 7, 1, 4, 7 };
const int vals_9481[16] = { 10, 6, 6, 10,
10, 6, 6, 10,
10, 6, 6, 10,
10, 6, 6, 10 };
+ const int vals_9461[16] = { 7, 1, 4, 7,
+ 7, 1, 4, 7,
+ 7, 1, 4, 7,
+ 7, 1, 4, 7 };
+ int bias[16] = {};
+ int i;
+
switch (phydev->drv->phy_id) {
case MTK_GPHY_ID_MT7981:
/* We add some calibration to efuse values
@@ -1069,10 +1070,10 @@ static int start_cal(struct phy_device *
static int mt798x_phy_calibration(struct phy_device *phydev)
{
+ struct nvmem_cell *cell;
int ret = 0;
- u32 *buf;
size_t len;
- struct nvmem_cell *cell;
+ u32 *buf;
cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data");
if (IS_ERR(cell)) {
@@ -1415,7 +1416,7 @@ static int mt7988_phy_probe_shared(struc
* LED_C and LED_D respectively. At the same time those pins are used to
* bootstrap configuration of the reference clock source (LED_A),
* DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
- * In practise this is done using a LED and a resistor pulling the pin
+ * In practice this is done using a LED and a resistor pulling the pin
* either to GND or to VIO.
* The detected value at boot time is accessible at run-time using the
* TPBANK0 register located in the gpio base of the pinctrl, in order

742
target/linux/mediatek/patches-6.6/733-03-net-phy-mediatek-Move-LED-helper-functions-into-mtk-.patch Normal file
View File

@ -0,0 +1,742 @@
From 434e41555c45ec10b19320024163bb009da168bc Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:07 +0800
Subject: [PATCH 03/13] net: phy: mediatek: Move LED helper functions into mtk
phy lib
This patch creates mtk-phy-lib.c & mtk-phy.h and integrates mtk-ge-soc.c's
LED helper functions so that we can use those helper functions in other
MTK's ethernet phy driver.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/Kconfig | 5 +
drivers/net/phy/mediatek/Makefile | 1 +
drivers/net/phy/mediatek/mtk-ge-soc.c | 262 +++----------------------
drivers/net/phy/mediatek/mtk-phy-lib.c | 251 +++++++++++++++++++++++
drivers/net/phy/mediatek/mtk.h | 82 ++++++++
6 files changed, 368 insertions(+), 235 deletions(-)
create mode 100644 drivers/net/phy/mediatek/mtk-phy-lib.c
create mode 100644 drivers/net/phy/mediatek/mtk.h
--- a/drivers/net/phy/mediatek/Kconfig
+++ b/drivers/net/phy/mediatek/Kconfig
@@ -1,6 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
+config MTK_NET_PHYLIB
+ tristate
+
config MEDIATEK_GE_PHY
tristate "MediaTek Gigabit Ethernet PHYs"
+ select MTK_NET_PHYLIB
help
Supports the MediaTek non-built-in Gigabit Ethernet PHYs.
@@ -13,6 +17,7 @@ config MEDIATEK_GE_SOC_PHY
tristate "MediaTek SoC Ethernet PHYs"
depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
select NVMEM_MTK_EFUSE
+ select MTK_NET_PHYLIB
help
Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
--- a/drivers/net/phy/mediatek/Makefile
+++ b/drivers/net/phy/mediatek/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_MTK_NET_PHYLIB) += mtk-phy-lib.o
obj-$(CONFIG_MEDIATEK_GE_PHY) += mtk-ge.o
obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mtk-ge-soc.o
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -8,6 +8,8 @@
#include <linux/phy.h>
#include <linux/regmap.h>
+#include "mtk.h"
+
#define MTK_GPHY_ID_MT7981 0x03a29461
#define MTK_GPHY_ID_MT7988 0x03a29481
@@ -210,41 +212,6 @@
#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
/* Registers on MDIO_MMD_VEND2 */
-#define MTK_PHY_LED0_ON_CTRL 0x24
-#define MTK_PHY_LED1_ON_CTRL 0x26
-#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
-#define MTK_PHY_LED_ON_LINK1000 BIT(0)
-#define MTK_PHY_LED_ON_LINK100 BIT(1)
-#define MTK_PHY_LED_ON_LINK10 BIT(2)
-#define MTK_PHY_LED_ON_LINK (MTK_PHY_LED_ON_LINK10 |\
- MTK_PHY_LED_ON_LINK100 |\
- MTK_PHY_LED_ON_LINK1000)
-#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
-#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
-#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
-#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
-#define MTK_PHY_LED_ON_POLARITY BIT(14)
-#define MTK_PHY_LED_ON_ENABLE BIT(15)
-
-#define MTK_PHY_LED0_BLINK_CTRL 0x25
-#define MTK_PHY_LED1_BLINK_CTRL 0x27
-#define MTK_PHY_LED_BLINK_1000TX BIT(0)
-#define MTK_PHY_LED_BLINK_1000RX BIT(1)
-#define MTK_PHY_LED_BLINK_100TX BIT(2)
-#define MTK_PHY_LED_BLINK_100RX BIT(3)
-#define MTK_PHY_LED_BLINK_10TX BIT(4)
-#define MTK_PHY_LED_BLINK_10RX BIT(5)
-#define MTK_PHY_LED_BLINK_RX (MTK_PHY_LED_BLINK_10RX |\
- MTK_PHY_LED_BLINK_100RX |\
- MTK_PHY_LED_BLINK_1000RX)
-#define MTK_PHY_LED_BLINK_TX (MTK_PHY_LED_BLINK_10TX |\
- MTK_PHY_LED_BLINK_100TX |\
- MTK_PHY_LED_BLINK_1000TX)
-#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
-#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
-#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
-#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
-
#define MTK_PHY_LED1_DEFAULT_POLARITIES BIT(1)
#define MTK_PHY_RG_BG_RASEL 0x115
@@ -299,10 +266,6 @@ enum CAL_MODE {
SW_M
};
-#define MTK_PHY_LED_STATE_FORCE_ON 0
-#define MTK_PHY_LED_STATE_FORCE_BLINK 1
-#define MTK_PHY_LED_STATE_NETDEV 2
-
struct mtk_socphy_priv {
unsigned long led_state;
};
@@ -1131,84 +1094,39 @@ static int mt798x_phy_config_init(struct
return mt798x_phy_calibration(phydev);
}
-static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
- bool on)
-{
- unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
- struct mtk_socphy_priv *priv = phydev->priv;
- bool changed;
-
- if (on)
- changed = !test_and_set_bit(bit_on, &priv->led_state);
- else
- changed = !!test_and_clear_bit(bit_on, &priv->led_state);
-
- changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
- (index ? 16 : 0), &priv->led_state);
- if (changed)
- return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
- MTK_PHY_LED_ON_MASK,
- on ? MTK_PHY_LED_ON_FORCE_ON : 0);
- else
- return 0;
-}
-
-static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
- bool blinking)
-{
- unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
- struct mtk_socphy_priv *priv = phydev->priv;
- bool changed;
-
- if (blinking)
- changed = !test_and_set_bit(bit_blink, &priv->led_state);
- else
- changed = !!test_and_clear_bit(bit_blink, &priv->led_state);
-
- changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
- (index ? 16 : 0), &priv->led_state);
- if (changed)
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL,
- blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
- else
- return 0;
-}
-
static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
unsigned long *delay_on,
unsigned long *delay_off)
{
+ struct mtk_socphy_priv *priv = phydev->priv;
bool blinking = false;
int err = 0;
- if (index > 1)
- return -EINVAL;
-
- if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
- blinking = true;
- *delay_on = 50;
- *delay_off = 50;
- }
+ err = mtk_phy_led_num_dly_cfg(index, delay_on, delay_off, &blinking);
+ if (err < 0)
+ return err;
- err = mt798x_phy_hw_led_blink_set(phydev, index, blinking);
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state,
+ blinking);
if (err)
return err;
- return mt798x_phy_hw_led_on_set(phydev, index, false);
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state,
+ MTK_GPHY_LED_ON_MASK, false);
}
static int mt798x_phy_led_brightness_set(struct phy_device *phydev,
u8 index, enum led_brightness value)
{
+ struct mtk_socphy_priv *priv = phydev->priv;
int err;
- err = mt798x_phy_hw_led_blink_set(phydev, index, false);
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state, false);
if (err)
return err;
- return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF));
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state,
+ MTK_GPHY_LED_ON_MASK, (value != LED_OFF));
}
static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
@@ -1223,148 +1141,30 @@ static const unsigned long supported_tri
static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
unsigned long rules)
{
- if (index > 1)
- return -EINVAL;
-
- /* All combinations of the supported triggers are allowed */
- if (rules & ~supported_triggers)
- return -EOPNOTSUPP;
-
- return 0;
-};
+ return mtk_phy_led_hw_is_supported(phydev, index, rules,
+ supported_triggers);
+}
static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
unsigned long *rules)
{
- unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
- unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
- unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
struct mtk_socphy_priv *priv = phydev->priv;
- int on, blink;
-
- if (index > 1)
- return -EINVAL;
-
- on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
- index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
-
- if (on < 0)
- return -EIO;
-
- blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
- index ? MTK_PHY_LED1_BLINK_CTRL :
- MTK_PHY_LED0_BLINK_CTRL);
- if (blink < 0)
- return -EIO;
-
- if ((on & (MTK_PHY_LED_ON_LINK | MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX |
- MTK_PHY_LED_ON_LINKDOWN)) ||
- (blink & (MTK_PHY_LED_BLINK_RX | MTK_PHY_LED_BLINK_TX)))
- set_bit(bit_netdev, &priv->led_state);
- else
- clear_bit(bit_netdev, &priv->led_state);
-
- if (on & MTK_PHY_LED_ON_FORCE_ON)
- set_bit(bit_on, &priv->led_state);
- else
- clear_bit(bit_on, &priv->led_state);
-
- if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
- set_bit(bit_blink, &priv->led_state);
- else
- clear_bit(bit_blink, &priv->led_state);
-
- if (!rules)
- return 0;
-
- if (on & MTK_PHY_LED_ON_LINK)
- *rules |= BIT(TRIGGER_NETDEV_LINK);
- if (on & MTK_PHY_LED_ON_LINK10)
- *rules |= BIT(TRIGGER_NETDEV_LINK_10);
-
- if (on & MTK_PHY_LED_ON_LINK100)
- *rules |= BIT(TRIGGER_NETDEV_LINK_100);
-
- if (on & MTK_PHY_LED_ON_LINK1000)
- *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
-
- if (on & MTK_PHY_LED_ON_FDX)
- *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
-
- if (on & MTK_PHY_LED_ON_HDX)
- *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
-
- if (blink & MTK_PHY_LED_BLINK_RX)
- *rules |= BIT(TRIGGER_NETDEV_RX);
-
- if (blink & MTK_PHY_LED_BLINK_TX)
- *rules |= BIT(TRIGGER_NETDEV_TX);
-
- return 0;
+ return mtk_phy_led_hw_ctrl_get(phydev, index, rules, &priv->led_state,
+ MTK_GPHY_LED_ON_SET,
+ MTK_GPHY_LED_RX_BLINK_SET,
+ MTK_GPHY_LED_TX_BLINK_SET);
};
static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
unsigned long rules)
{
- unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
struct mtk_socphy_priv *priv = phydev->priv;
- u16 on = 0, blink = 0;
- int ret;
- if (index > 1)
- return -EINVAL;
-
- if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
- on |= MTK_PHY_LED_ON_FDX;
-
- if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
- on |= MTK_PHY_LED_ON_HDX;
-
- if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
- on |= MTK_PHY_LED_ON_LINK10;
-
- if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
- on |= MTK_PHY_LED_ON_LINK100;
-
- if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
- on |= MTK_PHY_LED_ON_LINK1000;
-
- if (rules & BIT(TRIGGER_NETDEV_RX)) {
- blink |= (on & MTK_PHY_LED_ON_LINK) ?
- (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000RX : 0)) :
- MTK_PHY_LED_BLINK_RX;
- }
-
- if (rules & BIT(TRIGGER_NETDEV_TX)) {
- blink |= (on & MTK_PHY_LED_ON_LINK) ?
- (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000TX : 0)) :
- MTK_PHY_LED_BLINK_TX;
- }
-
- if (blink || on)
- set_bit(bit_netdev, &priv->led_state);
- else
- clear_bit(bit_netdev, &priv->led_state);
-
- ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_ON_CTRL :
- MTK_PHY_LED0_ON_CTRL,
- MTK_PHY_LED_ON_FDX |
- MTK_PHY_LED_ON_HDX |
- MTK_PHY_LED_ON_LINK,
- on);
-
- if (ret)
- return ret;
-
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_BLINK_CTRL :
- MTK_PHY_LED0_BLINK_CTRL, blink);
+ return mtk_phy_led_hw_ctrl_set(phydev, index, rules, &priv->led_state,
+ MTK_GPHY_LED_ON_SET,
+ MTK_GPHY_LED_RX_BLINK_SET,
+ MTK_GPHY_LED_TX_BLINK_SET);
};
static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num)
@@ -1438,14 +1238,6 @@ static int mt7988_phy_probe_shared(struc
return 0;
}
-static void mt798x_phy_leds_state_init(struct phy_device *phydev)
-{
- int i;
-
- for (i = 0; i < 2; ++i)
- mt798x_phy_led_hw_control_get(phydev, i, NULL);
-}
-
static int mt7988_phy_probe(struct phy_device *phydev)
{
struct mtk_socphy_shared *shared;
@@ -1471,7 +1263,7 @@ static int mt7988_phy_probe(struct phy_d
phydev->priv = priv;
- mt798x_phy_leds_state_init(phydev);
+ mtk_phy_leds_state_init(phydev);
err = mt7988_phy_fix_leds_polarities(phydev);
if (err)
@@ -1498,7 +1290,7 @@ static int mt7981_phy_probe(struct phy_d
phydev->priv = priv;
- mt798x_phy_leds_state_init(phydev);
+ mtk_phy_leds_state_init(phydev);
return mt798x_phy_calibration(phydev);
}
--- /dev/null
+++ b/drivers/net/phy/mediatek/mtk-phy-lib.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/phy.h>
+#include <linux/module.h>
+
+#include <linux/netdevice.h>
+
+#include "mtk.h"
+
+int mtk_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules,
+ unsigned long supported_triggers)
+{
+ if (index > 1)
+ return -EINVAL;
+
+ /* All combinations of the supported triggers are allowed */
+ if (rules & ~supported_triggers)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_phy_led_hw_is_supported);
+
+int mtk_phy_led_hw_ctrl_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules, unsigned long *led_state,
+ u16 on_set, u16 rx_blink_set, u16 tx_blink_set)
+{
+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK +
+ (index ? 16 : 0);
+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
+ int on, blink;
+
+ if (index > 1)
+ return -EINVAL;
+
+ on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
+
+ if (on < 0)
+ return -EIO;
+
+ blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ index ? MTK_PHY_LED1_BLINK_CTRL :
+ MTK_PHY_LED0_BLINK_CTRL);
+ if (blink < 0)
+ return -EIO;
+
+ if ((on & (on_set | MTK_PHY_LED_ON_FDX |
+ MTK_PHY_LED_ON_HDX | MTK_PHY_LED_ON_LINKDOWN)) ||
+ (blink & (rx_blink_set | tx_blink_set)))
+ set_bit(bit_netdev, led_state);
+ else
+ clear_bit(bit_netdev, led_state);
+
+ if (on & MTK_PHY_LED_ON_FORCE_ON)
+ set_bit(bit_on, led_state);
+ else
+ clear_bit(bit_on, led_state);
+
+ if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
+ set_bit(bit_blink, led_state);
+ else
+ clear_bit(bit_blink, led_state);
+
+ if (!rules)
+ return 0;
+
+ if (on & on_set)
+ *rules |= BIT(TRIGGER_NETDEV_LINK);
+
+ if (on & MTK_PHY_LED_ON_LINK10)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_10);
+
+ if (on & MTK_PHY_LED_ON_LINK100)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_100);
+
+ if (on & MTK_PHY_LED_ON_LINK1000)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
+
+ if (on & MTK_PHY_LED_ON_LINK2500)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_2500);
+
+ if (on & MTK_PHY_LED_ON_FDX)
+ *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
+
+ if (on & MTK_PHY_LED_ON_HDX)
+ *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
+
+ if (blink & rx_blink_set)
+ *rules |= BIT(TRIGGER_NETDEV_RX);
+
+ if (blink & tx_blink_set)
+ *rules |= BIT(TRIGGER_NETDEV_TX);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_phy_led_hw_ctrl_get);
+
+int mtk_phy_led_hw_ctrl_set(struct phy_device *phydev, u8 index,
+ unsigned long rules, unsigned long *led_state,
+ u16 on_set, u16 rx_blink_set, u16 tx_blink_set)
+{
+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
+ u16 on = 0, blink = 0;
+ int ret;
+
+ if (index > 1)
+ return -EINVAL;
+
+ if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
+ on |= MTK_PHY_LED_ON_FDX;
+
+ if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
+ on |= MTK_PHY_LED_ON_HDX;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK10;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK100;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK1000;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_2500) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK2500;
+
+ if (rules & BIT(TRIGGER_NETDEV_RX)) {
+ blink |= (on & on_set) ?
+ (((on & MTK_PHY_LED_ON_LINK10) ?
+ MTK_PHY_LED_BLINK_10RX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK100) ?
+ MTK_PHY_LED_BLINK_100RX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK1000) ?
+ MTK_PHY_LED_BLINK_1000RX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK2500) ?
+ MTK_PHY_LED_BLINK_2500RX : 0)) :
+ rx_blink_set;
+ }
+
+ if (rules & BIT(TRIGGER_NETDEV_TX)) {
+ blink |= (on & on_set) ?
+ (((on & MTK_PHY_LED_ON_LINK10) ?
+ MTK_PHY_LED_BLINK_10TX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK100) ?
+ MTK_PHY_LED_BLINK_100TX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK1000) ?
+ MTK_PHY_LED_BLINK_1000TX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK2500) ?
+ MTK_PHY_LED_BLINK_2500TX : 0)) :
+ tx_blink_set;
+ }
+
+ if (blink || on)
+ set_bit(bit_netdev, led_state);
+ else
+ clear_bit(bit_netdev, led_state);
+
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX | on_set,
+ on);
+
+ if (ret)
+ return ret;
+
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_BLINK_CTRL :
+ MTK_PHY_LED0_BLINK_CTRL, blink);
+}
+EXPORT_SYMBOL_GPL(mtk_phy_led_hw_ctrl_set);
+
+int mtk_phy_led_num_dly_cfg(u8 index, unsigned long *delay_on,
+ unsigned long *delay_off, bool *blinking)
+{
+ if (index > 1)
+ return -EINVAL;
+
+ if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
+ *blinking = true;
+ *delay_on = 50;
+ *delay_off = 50;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_phy_led_num_dly_cfg);
+
+int mtk_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
+ unsigned long *led_state, u16 led_on_mask, bool on)
+{
+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
+ bool changed;
+
+ if (on)
+ changed = !test_and_set_bit(bit_on, led_state);
+ else
+ changed = !!test_and_clear_bit(bit_on, led_state);
+
+ changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
+ (index ? 16 : 0), led_state);
+ if (changed)
+ return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_ON_CTRL :
+ MTK_PHY_LED0_ON_CTRL,
+ led_on_mask,
+ on ? MTK_PHY_LED_ON_FORCE_ON : 0);
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_phy_hw_led_on_set);
+
+int mtk_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
+ unsigned long *led_state, bool blinking)
+{
+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK +
+ (index ? 16 : 0);
+ bool changed;
+
+ if (blinking)
+ changed = !test_and_set_bit(bit_blink, led_state);
+ else
+ changed = !!test_and_clear_bit(bit_blink, led_state);
+
+ changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
+ (index ? 16 : 0), led_state);
+ if (changed)
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_BLINK_CTRL :
+ MTK_PHY_LED0_BLINK_CTRL,
+ blinking ?
+ MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_phy_hw_led_blink_set);
+
+void mtk_phy_leds_state_init(struct phy_device *phydev)
+{
+ int i;
+
+ for (i = 0; i < 2; ++i)
+ phydev->drv->led_hw_control_get(phydev, i, NULL);
+}
+EXPORT_SYMBOL_GPL(mtk_phy_leds_state_init);
+
+MODULE_DESCRIPTION("MediaTek Ethernet PHY driver common");
+MODULE_AUTHOR("Sky Huang <SkyLake.Huang@mediatek.com>");
+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/net/phy/mediatek/mtk.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Common definition for Mediatek Ethernet PHYs
+ * Author: SkyLake Huang <SkyLake.Huang@mediatek.com>
+ * Copyright (c) 2024 MediaTek Inc.
+ */
+
+#ifndef _MTK_EPHY_H_
+#define _MTK_EPHY_H_
+
+#define MTK_EXT_PAGE_ACCESS 0x1f
+
+/* Registers on MDIO_MMD_VEND2 */
+#define MTK_PHY_LED0_ON_CTRL 0x24
+#define MTK_PHY_LED1_ON_CTRL 0x26
+#define MTK_GPHY_LED_ON_MASK GENMASK(6, 0)
+#define MTK_2P5GPHY_LED_ON_MASK GENMASK(7, 0)
+#define MTK_PHY_LED_ON_LINK1000 BIT(0)
+#define MTK_PHY_LED_ON_LINK100 BIT(1)
+#define MTK_PHY_LED_ON_LINK10 BIT(2)
+#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
+#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
+#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
+#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
+#define MTK_PHY_LED_ON_LINK2500 BIT(7)
+#define MTK_PHY_LED_ON_POLARITY BIT(14)
+#define MTK_PHY_LED_ON_ENABLE BIT(15)
+
+#define MTK_PHY_LED0_BLINK_CTRL 0x25
+#define MTK_PHY_LED1_BLINK_CTRL 0x27
+#define MTK_PHY_LED_BLINK_1000TX BIT(0)
+#define MTK_PHY_LED_BLINK_1000RX BIT(1)
+#define MTK_PHY_LED_BLINK_100TX BIT(2)
+#define MTK_PHY_LED_BLINK_100RX BIT(3)
+#define MTK_PHY_LED_BLINK_10TX BIT(4)
+#define MTK_PHY_LED_BLINK_10RX BIT(5)
+#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
+#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
+#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
+#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
+#define MTK_PHY_LED_BLINK_2500TX BIT(10)
+#define MTK_PHY_LED_BLINK_2500RX BIT(11)
+
+#define MTK_GPHY_LED_ON_SET (MTK_PHY_LED_ON_LINK1000 | \
+ MTK_PHY_LED_ON_LINK100 | \
+ MTK_PHY_LED_ON_LINK10)
+#define MTK_GPHY_LED_RX_BLINK_SET (MTK_PHY_LED_BLINK_1000RX | \
+ MTK_PHY_LED_BLINK_100RX | \
+ MTK_PHY_LED_BLINK_10RX)
+#define MTK_GPHY_LED_TX_BLINK_SET (MTK_PHY_LED_BLINK_1000RX | \
+ MTK_PHY_LED_BLINK_100RX | \
+ MTK_PHY_LED_BLINK_10RX)
+
+#define MTK_2P5GPHY_LED_ON_SET (MTK_PHY_LED_ON_LINK2500 | \
+ MTK_GPHY_LED_ON_SET)
+#define MTK_2P5GPHY_LED_RX_BLINK_SET (MTK_PHY_LED_BLINK_2500RX | \
+ MTK_GPHY_LED_RX_BLINK_SET)
+#define MTK_2P5GPHY_LED_TX_BLINK_SET (MTK_PHY_LED_BLINK_2500RX | \
+ MTK_GPHY_LED_TX_BLINK_SET)
+
+#define MTK_PHY_LED_STATE_FORCE_ON 0
+#define MTK_PHY_LED_STATE_FORCE_BLINK 1
+#define MTK_PHY_LED_STATE_NETDEV 2
+
+int mtk_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules,
+ unsigned long supported_triggers);
+int mtk_phy_led_hw_ctrl_set(struct phy_device *phydev, u8 index,
+ unsigned long rules, unsigned long *led_state,
+ u16 on_set, u16 rx_blink_set, u16 tx_blink_set);
+int mtk_phy_led_hw_ctrl_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules, unsigned long *led_state,
+ u16 on_set, u16 rx_blink_set, u16 tx_blink_set);
+int mtk_phy_led_num_dly_cfg(u8 index, unsigned long *delay_on,
+ unsigned long *delay_off, bool *blinking);
+int mtk_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
+ unsigned long *led_state, u16 led_on_mask, bool on);
+int mtk_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
+ unsigned long *led_state, bool blinking);
+void mtk_phy_leds_state_init(struct phy_device *phydev);
+
+#endif /* _MTK_EPHY_H_ */

70
target/linux/mediatek/patches-6.6/733-04-net-phy-mediatek-Improve-readability-of-mtk-phy-lib..patch Normal file
View File

@ -0,0 +1,70 @@
From 2783929879854d5750ba82e2e203663313362abb Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:08 +0800
Subject: [PATCH 04/13] net: phy: mediatek: Improve readability of
mtk-phy-lib.c's mtk_phy_led_hw_ctrl_set()
This patch removes parens around TRIGGER_NETDEV_RX/TRIGGER_NETDEV_TX in
mtk_phy_led_hw_ctrl_set(), which improves readability.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-phy-lib.c | 44 ++++++++++++++------------
1 file changed, 24 insertions(+), 20 deletions(-)
--- a/drivers/net/phy/mediatek/mtk-phy-lib.c
+++ b/drivers/net/phy/mediatek/mtk-phy-lib.c
@@ -127,29 +127,33 @@ int mtk_phy_led_hw_ctrl_set(struct phy_d
on |= MTK_PHY_LED_ON_LINK2500;
if (rules & BIT(TRIGGER_NETDEV_RX)) {
- blink |= (on & on_set) ?
- (((on & MTK_PHY_LED_ON_LINK10) ?
- MTK_PHY_LED_BLINK_10RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ?
- MTK_PHY_LED_BLINK_100RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ?
- MTK_PHY_LED_BLINK_1000RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK2500) ?
- MTK_PHY_LED_BLINK_2500RX : 0)) :
- rx_blink_set;
+ if (on & on_set) {
+ if (on & MTK_PHY_LED_ON_LINK10)
+ blink |= MTK_PHY_LED_BLINK_10RX;
+ if (on & MTK_PHY_LED_ON_LINK100)
+ blink |= MTK_PHY_LED_BLINK_100RX;
+ if (on & MTK_PHY_LED_ON_LINK1000)
+ blink |= MTK_PHY_LED_BLINK_1000RX;
+ if (on & MTK_PHY_LED_ON_LINK2500)
+ blink |= MTK_PHY_LED_BLINK_2500RX;
+ } else {
+ blink |= rx_blink_set;
+ }
}
if (rules & BIT(TRIGGER_NETDEV_TX)) {
- blink |= (on & on_set) ?
- (((on & MTK_PHY_LED_ON_LINK10) ?
- MTK_PHY_LED_BLINK_10TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ?
- MTK_PHY_LED_BLINK_100TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ?
- MTK_PHY_LED_BLINK_1000TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK2500) ?
- MTK_PHY_LED_BLINK_2500TX : 0)) :
- tx_blink_set;
+ if (on & on_set) {
+ if (on & MTK_PHY_LED_ON_LINK10)
+ blink |= MTK_PHY_LED_BLINK_10TX;
+ if (on & MTK_PHY_LED_ON_LINK100)
+ blink |= MTK_PHY_LED_BLINK_100TX;
+ if (on & MTK_PHY_LED_ON_LINK1000)
+ blink |= MTK_PHY_LED_BLINK_1000TX;
+ if (on & MTK_PHY_LED_ON_LINK2500)
+ blink |= MTK_PHY_LED_BLINK_2500TX;
+ } else {
+ blink |= tx_blink_set;
+ }
}
if (blink || on)

141
target/linux/mediatek/patches-6.6/733-05-net-phy-mediatek-Integrate-read-write-page-helper-fu.patch Normal file
View File

@ -0,0 +1,141 @@
From 58c1270423ab48464cdc31ef71ffe7f5b2441961 Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:09 +0800
Subject: [PATCH 05/13] net: phy: mediatek: Integrate read/write page helper
functions
This patch integrates read/write page helper functions as MTK phy lib.
They are basically the same in mtk-ge.c & mtk-ge-soc.c.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge-soc.c | 18 ++++--------------
drivers/net/phy/mediatek/mtk-ge.c | 20 ++++++--------------
drivers/net/phy/mediatek/mtk-phy-lib.c | 12 ++++++++++++
drivers/net/phy/mediatek/mtk.h | 3 +++
4 files changed, 25 insertions(+), 28 deletions(-)
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -275,16 +275,6 @@ struct mtk_socphy_shared {
struct mtk_socphy_priv priv[4];
};
-static int mtk_socphy_read_page(struct phy_device *phydev)
-{
- return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-}
-
-static int mtk_socphy_write_page(struct phy_device *phydev, int page)
-{
- return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
-}
-
/* One calibration cycle consists of:
* 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
* until AD_CAL_COMP is ready to output calibration result.
@@ -1305,8 +1295,8 @@ static struct phy_driver mtk_socphy_driv
.probe = mt7981_phy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
- .read_page = mtk_socphy_read_page,
- .write_page = mtk_socphy_write_page,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
.led_blink_set = mt798x_phy_led_blink_set,
.led_brightness_set = mt798x_phy_led_brightness_set,
.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
@@ -1322,8 +1312,8 @@ static struct phy_driver mtk_socphy_driv
.probe = mt7988_phy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
- .read_page = mtk_socphy_read_page,
- .write_page = mtk_socphy_write_page,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
.led_blink_set = mt798x_phy_led_blink_set,
.led_brightness_set = mt798x_phy_led_brightness_set,
.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -4,6 +4,8 @@
#include <linux/module.h>
#include <linux/phy.h>
+#include "mtk.h"
+
#define MTK_EXT_PAGE_ACCESS 0x1f
#define MTK_PHY_PAGE_STANDARD 0x0000
#define MTK_PHY_PAGE_EXTENDED 0x0001
@@ -12,16 +14,6 @@
#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
-static int mtk_gephy_read_page(struct phy_device *phydev)
-{
- return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-}
-
-static int mtk_gephy_write_page(struct phy_device *phydev, int page)
-{
- return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
-}
-
static void mtk_gephy_config_init(struct phy_device *phydev)
{
/* Disable EEE */
@@ -114,8 +106,8 @@ static struct phy_driver mtk_gephy_drive
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
- .read_page = mtk_gephy_read_page,
- .write_page = mtk_gephy_write_page,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
},
{
PHY_ID_MATCH_EXACT(0x03a29441),
@@ -128,8 +120,8 @@ static struct phy_driver mtk_gephy_drive
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
- .read_page = mtk_gephy_read_page,
- .write_page = mtk_gephy_write_page,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
},
};
--- a/drivers/net/phy/mediatek/mtk-phy-lib.c
+++ b/drivers/net/phy/mediatek/mtk-phy-lib.c
@@ -6,6 +6,18 @@
#include "mtk.h"
+int mtk_phy_read_page(struct phy_device *phydev)
+{
+ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
+}
+EXPORT_SYMBOL_GPL(mtk_phy_read_page);
+
+int mtk_phy_write_page(struct phy_device *phydev, int page)
+{
+ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
+}
+EXPORT_SYMBOL_GPL(mtk_phy_write_page);
+
int mtk_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
unsigned long rules,
unsigned long supported_triggers)
--- a/drivers/net/phy/mediatek/mtk.h
+++ b/drivers/net/phy/mediatek/mtk.h
@@ -62,6 +62,9 @@
#define MTK_PHY_LED_STATE_FORCE_BLINK 1
#define MTK_PHY_LED_STATE_NETDEV 2
+int mtk_phy_read_page(struct phy_device *phydev);
+int mtk_phy_write_page(struct phy_device *phydev, int page);
+
int mtk_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
unsigned long rules,
unsigned long supported_triggers);

146
target/linux/mediatek/patches-6.6/733-06-net-phy-mediatek-Hook-LED-helper-functions-in-mtk-ge.patch Normal file
View File

@ -0,0 +1,146 @@
From 9403f1d54598ae56386a8bf47a5b6b34c884e4f5 Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:10 +0800
Subject: [PATCH 06/13] net: phy: mediatek: Hook LED helper functions in
mtk-ge.c
We have mtk-phy-lib.c now so that we can use LED helper functions in
mtk-ge.c(mt7531 part). It also means that mt7531/mt7981/mt7988's
Giga ethernet phys share almost the same HW LED controller design.
Also, add probe function for mt7531 so that it can initialize LED state.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge.c | 100 ++++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -14,6 +14,10 @@
#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
+struct mtk_gephy_priv {
+ unsigned long led_state;
+};
+
static void mtk_gephy_config_init(struct phy_device *phydev)
{
/* Disable EEE */
@@ -94,6 +98,96 @@ static int mt7531_phy_config_init(struct
return 0;
}
+static int mt7531_phy_probe(struct phy_device *phydev)
+{
+ struct mtk_gephy_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_gephy_priv),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ mtk_phy_leds_state_init(phydev);
+
+ return 0;
+}
+
+static int mt753x_phy_led_blink_set(struct phy_device *phydev, u8 index,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct mtk_gephy_priv *priv = phydev->priv;
+ bool blinking = false;
+ int err = 0;
+
+ err = mtk_phy_led_num_dly_cfg(index, delay_on, delay_off, &blinking);
+ if (err < 0)
+ return err;
+
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state,
+ blinking);
+ if (err)
+ return err;
+
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state,
+ MTK_GPHY_LED_ON_MASK, false);
+}
+
+static int mt753x_phy_led_brightness_set(struct phy_device *phydev,
+ u8 index, enum led_brightness value)
+{
+ struct mtk_gephy_priv *priv = phydev->priv;
+ int err;
+
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state, false);
+ if (err)
+ return err;
+
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state,
+ MTK_GPHY_LED_ON_MASK, (value != LED_OFF));
+}
+
+static const unsigned long supported_triggers =
+ (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
+ BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_10) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX));
+
+static int mt753x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ return mtk_phy_led_hw_is_supported(phydev, index, rules,
+ supported_triggers);
+}
+
+static int mt753x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules)
+{
+ struct mtk_gephy_priv *priv = phydev->priv;
+
+ return mtk_phy_led_hw_ctrl_get(phydev, index, rules, &priv->led_state,
+ MTK_GPHY_LED_ON_SET,
+ MTK_GPHY_LED_RX_BLINK_SET,
+ MTK_GPHY_LED_TX_BLINK_SET);
+};
+
+static int mt753x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ struct mtk_gephy_priv *priv = phydev->priv;
+
+ return mtk_phy_led_hw_ctrl_set(phydev, index, rules, &priv->led_state,
+ MTK_GPHY_LED_ON_SET,
+ MTK_GPHY_LED_RX_BLINK_SET,
+ MTK_GPHY_LED_TX_BLINK_SET);
+};
+
static struct phy_driver mtk_gephy_driver[] = {
{
PHY_ID_MATCH_EXACT(0x03a29412),
@@ -112,6 +206,7 @@ static struct phy_driver mtk_gephy_drive
{
PHY_ID_MATCH_EXACT(0x03a29441),
.name = "MediaTek MT7531 PHY",
+ .probe = mt7531_phy_probe,
.config_init = mt7531_phy_config_init,
/* Interrupts are handled by the switch, not the PHY
* itself.
@@ -122,6 +217,11 @@ static struct phy_driver mtk_gephy_drive
.resume = genphy_resume,
.read_page = mtk_phy_read_page,
.write_page = mtk_phy_write_page,
+ .led_blink_set = mt753x_phy_led_blink_set,
+ .led_brightness_set = mt753x_phy_led_brightness_set,
+ .led_hw_is_supported = mt753x_phy_led_hw_is_supported,
+ .led_hw_control_set = mt753x_phy_led_hw_control_set,
+ .led_hw_control_get = mt753x_phy_led_hw_control_get,
},
};

54
target/linux/mediatek/patches-6.6/733-07-net-phy-mediatek-add-MT7530-MT7531-s-PHY-ID-macros.patch Normal file
View File

@ -0,0 +1,54 @@
From 51ee83602dbb84716180d9b6e43f6bebb0c2d7bd Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:11 +0800
Subject: [PATCH 07/13] net: phy: mediatek: add MT7530 & MT7531's PHY ID macros
This patch adds MT7530 & MT7531's PHY ID macros in mtk-ge.c so that
it follows the same rule of mtk-ge-soc.c.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -6,6 +6,9 @@
#include "mtk.h"
+#define MTK_GPHY_ID_MT7530 0x03a29412
+#define MTK_GPHY_ID_MT7531 0x03a29441
+
#define MTK_EXT_PAGE_ACCESS 0x1f
#define MTK_PHY_PAGE_STANDARD 0x0000
#define MTK_PHY_PAGE_EXTENDED 0x0001
@@ -190,7 +193,7 @@ static int mt753x_phy_led_hw_control_set
static struct phy_driver mtk_gephy_driver[] = {
{
- PHY_ID_MATCH_EXACT(0x03a29412),
+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7530),
.name = "MediaTek MT7530 PHY",
.config_init = mt7530_phy_config_init,
/* Interrupts are handled by the switch, not the PHY
@@ -204,7 +207,7 @@ static struct phy_driver mtk_gephy_drive
.write_page = mtk_phy_write_page,
},
{
- PHY_ID_MATCH_EXACT(0x03a29441),
+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7531),
.name = "MediaTek MT7531 PHY",
.probe = mt7531_phy_probe,
.config_init = mt7531_phy_config_init,
@@ -228,8 +231,8 @@ static struct phy_driver mtk_gephy_drive
module_phy_driver(mtk_gephy_driver);
static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
- { PHY_ID_MATCH_EXACT(0x03a29441) },
- { PHY_ID_MATCH_EXACT(0x03a29412) },
+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7530) },
+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7531) },
{ }
};

182
target/linux/mediatek/patches-6.6/733-08-net-phy-mediatek-Change-mtk-ge-soc.c-line-wrapping.patch Normal file
View File

@ -0,0 +1,182 @@
From e73df692396b0d6bdcb2317299fa1e8e547f3446 Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:12 +0800
Subject: [PATCH 08/13] net: phy: mediatek: Change mtk-ge-soc.c line wrapping
This patch shrinks mtk-ge-soc.c line wrapping to 80 characters.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge-soc.c | 67 +++++++++++++++++----------
1 file changed, 42 insertions(+), 25 deletions(-)
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -295,7 +295,8 @@ static int cal_cycle(struct phy_device *
ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
MTK_PHY_RG_AD_CAL_CLK, reg_val,
reg_val & MTK_PHY_DA_CAL_CLK, 500,
- ANALOG_INTERNAL_OPERATION_MAX_US, false);
+ ANALOG_INTERNAL_OPERATION_MAX_US,
+ false);
if (ret) {
phydev_err(phydev, "Calibration cycle timeout\n");
return ret;
@@ -304,7 +305,7 @@ static int cal_cycle(struct phy_device *
phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
MTK_PHY_DA_CALIN_FLAG);
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
- MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
+ MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
return ret;
@@ -394,38 +395,46 @@ static int tx_amp_fill_result(struct phy
}
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
- MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
+ MTK_PHY_DA_TX_I2MPB_A_GBE_MASK,
+ (buf[0] + bias[0]) << 10);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
- MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
+ MTK_PHY_DA_TX_I2MPB_A_HBT_MASK,
+ (buf[0] + bias[2]) << 10);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
- MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
+ MTK_PHY_DA_TX_I2MPB_B_GBE_MASK,
+ (buf[1] + bias[4]) << 8);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
- MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
+ MTK_PHY_DA_TX_I2MPB_B_HBT_MASK,
+ (buf[1] + bias[6]) << 8);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
- MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
+ MTK_PHY_DA_TX_I2MPB_C_GBE_MASK,
+ (buf[2] + bias[8]) << 8);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
- MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
+ MTK_PHY_DA_TX_I2MPB_C_HBT_MASK,
+ (buf[2] + bias[10]) << 8);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
- MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
+ MTK_PHY_DA_TX_I2MPB_D_GBE_MASK,
+ (buf[3] + bias[12]) << 8);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
- MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
+ MTK_PHY_DA_TX_I2MPB_D_HBT_MASK,
+ (buf[3] + bias[14]) << 8);
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
@@ -616,7 +625,8 @@ static int tx_vcm_cal_sw(struct phy_devi
goto restore;
/* We calibrate TX-VCM in different logic. Check upper index and then
- * lower index. If this calibration is valid, apply lower index's result.
+ * lower index. If this calibration is valid, apply lower index's
+ * result.
*/
ret = upper_ret - lower_ret;
if (ret == 1) {
@@ -645,7 +655,8 @@ static int tx_vcm_cal_sw(struct phy_devi
} else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
lower_ret == 0) {
ret = 0;
- phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
+ phydev_warn(phydev,
+ "TX-VCM SW cal result at high margin 0x%x\n",
upper_idx);
} else {
ret = -EINVAL;
@@ -749,7 +760,8 @@ static void mt7981_phy_finetune(struct p
/* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
- MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
+ MTK_PHY_TR_OPEN_LOOP_EN_MASK |
+ MTK_PHY_LPF_X_AVERAGE_MASK,
BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
/* rg_tr_lpf_cnt_val = 512 */
@@ -818,7 +830,8 @@ static void mt7988_phy_finetune(struct p
/* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
- MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
+ MTK_PHY_TR_OPEN_LOOP_EN_MASK |
+ MTK_PHY_LPF_X_AVERAGE_MASK,
BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0xa));
/* rg_tr_lpf_cnt_val = 1023 */
@@ -930,7 +943,8 @@ static void mt798x_phy_eee(struct phy_de
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
- __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
+ __phy_modify(phydev, MTK_PHY_LPI_REG_14,
+ MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
__phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
@@ -940,7 +954,8 @@ static void mt798x_phy_eee(struct phy_de
phy_modify_mmd(phydev, MDIO_MMD_VEND1,
MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
- FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
+ 0xff));
}
static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
@@ -1119,14 +1134,15 @@ static int mt798x_phy_led_brightness_set
MTK_GPHY_LED_ON_MASK, (value != LED_OFF));
}
-static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
- BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
- BIT(TRIGGER_NETDEV_LINK) |
- BIT(TRIGGER_NETDEV_LINK_10) |
- BIT(TRIGGER_NETDEV_LINK_100) |
- BIT(TRIGGER_NETDEV_LINK_1000) |
- BIT(TRIGGER_NETDEV_RX) |
- BIT(TRIGGER_NETDEV_TX));
+static const unsigned long supported_triggers =
+ (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
+ BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_10) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX));
static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
unsigned long rules)
@@ -1189,7 +1205,8 @@ static int mt7988_phy_fix_leds_polaritie
/* Only now setup pinctrl to avoid bogus blinking */
pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
if (IS_ERR(pinctrl))
- dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n");
+ dev_err(&phydev->mdio.bus->dev,
+ "Failed to setup PHY LED pinctrl\n");
return 0;
}

614
target/linux/mediatek/patches-6.6/733-09-net-phy-mediatek-Add-token-ring-access-helper-functi.patch Normal file
View File

@ -0,0 +1,614 @@
From 60228de48d8bfde62b4db5945314e6a62079f091 Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:13 +0800
Subject: [PATCH 09/13] net: phy: mediatek: Add token ring access helper
functions in mtk-phy-lib
This patch adds TR(token ring) manipulations and adds correct
macro names for those magic numbers. TR is a way to access
proprietary registers on page 52b5. Use these helper functions
so we can see which fields we're going to modify/set/clear.
This patch doesn't really change registers' settings but just
enhances readability and maintainability.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge-soc.c | 297 ++++++++++++++++---------
drivers/net/phy/mediatek/mtk-ge.c | 82 +++++--
drivers/net/phy/mediatek/mtk-phy-lib.c | 91 ++++++++
drivers/net/phy/mediatek/mtk.h | 13 ++
4 files changed, 358 insertions(+), 125 deletions(-)
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -24,7 +24,108 @@
#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8)
#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
-#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
+
+/* Registers on Token Ring debug nodes */
+/* ch_addr = 0x0, node_addr = 0x7, data_addr = 0x15 */
+/* NormMseLoThresh */
+#define NORMAL_MSE_LO_THRESH_MASK GENMASK(15, 8)
+
+/* ch_addr = 0x0, node_addr = 0xf, data_addr = 0x3c */
+/* RemAckCntLimitCtrl */
+#define REMOTE_ACK_COUNT_LIMIT_CTRL_MASK GENMASK(2, 1)
+
+/* ch_addr = 0x1, node_addr = 0xd, data_addr = 0x20 */
+/* VcoSlicerThreshBitsHigh */
+#define VCO_SLICER_THRESH_HIGH_MASK GENMASK(23, 0)
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x0 */
+/* DfeTailEnableVgaThresh1000 */
+#define DFE_TAIL_EANBLE_VGA_TRHESH_1000 GENMASK(5, 1)
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x1 */
+/* MrvlTrFix100Kp */
+#define MRVL_TR_FIX_100KP_MASK GENMASK(22, 20)
+/* MrvlTrFix100Kf */
+#define MRVL_TR_FIX_100KF_MASK GENMASK(19, 17)
+/* MrvlTrFix1000Kp */
+#define MRVL_TR_FIX_1000KP_MASK GENMASK(16, 14)
+/* MrvlTrFix1000Kf */
+#define MRVL_TR_FIX_1000KF_MASK GENMASK(13, 11)
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x12 */
+/* VgaDecRate */
+#define VGA_DECIMATION_RATE_MASK GENMASK(8, 5)
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x17 */
+/* SlvDSPreadyTime */
+#define SLAVE_DSP_READY_TIME_MASK GENMASK(22, 15)
+/* MasDSPreadyTime */
+#define MASTER_DSP_READY_TIME_MASK GENMASK(14, 7)
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x18 */
+/* EnabRandUpdTrig */
+#define ENABLE_RANDOM_UPDOWN_COUNTER_TRIGGER BIT(8)
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x20 */
+/* ResetSyncOffset */
+#define RESET_SYNC_OFFSET_MASK GENMASK(11, 8)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x0 */
+/* FfeUpdGainForceVal */
+#define FFE_UPDATE_GAIN_FORCE_VAL_MASK GENMASK(9, 7)
+/* FfeUpdGainForce */
+#define FFE_UPDATE_GAIN_FORCE BIT(6)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x3 */
+/* TrFreeze */
+#define TR_FREEZE_MASK GENMASK(11, 0)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x6 */
+/* SS: Steady-state, KP: Proportional Gain */
+/* SSTrKp100 */
+#define SS_TR_KP100_MASK GENMASK(21, 19)
+/* SSTrKf100 */
+#define SS_TR_KF100_MASK GENMASK(18, 16)
+/* SSTrKp1000Mas */
+#define SS_TR_KP1000_MASTER_MASK GENMASK(15, 13)
+/* SSTrKf1000Mas */
+#define SS_TR_KF1000_MASTER_MASK GENMASK(12, 10)
+/* SSTrKp1000Slv */
+#define SS_TR_KP1000_SLAVE_MASK GENMASK(9, 7)
+/* SSTrKf1000Slv */
+#define SS_TR_KF1000_SLAVE_MASK GENMASK(6, 4)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x8 */
+/* clear this bit if wanna select from AFE */
+/* Regsigdet_sel_1000 */
+#define EEE1000_SELECT_SIGNAL_DETECTION_FROM_DFE BIT(4)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0xd */
+/* RegEEE_st2TrKf1000 */
+#define EEE1000_STAGE2_TR_KF_MASK GENMASK(13, 11)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0xf */
+/* RegEEE_slv_waketr_timer_tar */
+#define SLAVE_WAKETR_TIMER_MASK GENMASK(20, 11)
+/* RegEEE_slv_remtx_timer_tar */
+#define SLAVE_REMTX_TIMER_MASK GENMASK(10, 1)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x10 */
+/* RegEEE_slv_wake_int_timer_tar */
+#define SLAVE_WAKEINT_TIMER_MASK GENMASK(10, 1)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x14 */
+/* RegEEE_trfreeze_timer2 */
+#define TR_FREEZE_TIMER2_MASK GENMASK(9, 0)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x1c */
+/* RegEEE100Stg1_tar */
+#define EEE100_LPSYNC_STAGE1_UPDATE_TIMER_MASK GENMASK(8, 0)
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x25 */
+/* REGEEE_wake_slv_tr_wait_dfesigdet_en */
+#define WAKE_SLAVE_TR_WAIT_DFE_DETECTION_EN BIT(11)
+
#define ANALOG_INTERNAL_OPERATION_MAX_US 20
#define TXRESERVE_MIN 0
@@ -679,40 +780,36 @@ restore:
static void mt798x_phy_common_finetune(struct phy_device *phydev)
{
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
- __phy_write(phydev, 0x11, 0xc71);
- __phy_write(phydev, 0x12, 0xc);
- __phy_write(phydev, 0x10, 0x8fae);
-
- /* EnabRandUpdTrig = 1 */
- __phy_write(phydev, 0x11, 0x2f00);
- __phy_write(phydev, 0x12, 0xe);
- __phy_write(phydev, 0x10, 0x8fb0);
-
- /* NormMseLoThresh = 85 */
- __phy_write(phydev, 0x11, 0x55a0);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x83aa);
-
- /* FfeUpdGainForce = 1(Enable), FfeUpdGainForceVal = 4 */
- __phy_write(phydev, 0x11, 0x240);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9680);
-
- /* TrFreeze = 0 (mt7988 default) */
- __phy_write(phydev, 0x11, 0x0);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9686);
-
- /* SSTrKp100 = 5 */
- /* SSTrKf100 = 6 */
- /* SSTrKp1000Mas = 5 */
- /* SSTrKf1000Mas = 6 */
- /* SSTrKp1000Slv = 5 */
- /* SSTrKf1000Slv = 6 */
- __phy_write(phydev, 0x11, 0xbaef);
- __phy_write(phydev, 0x12, 0x2e);
- __phy_write(phydev, 0x10, 0x968c);
+ __mtk_tr_modify(phydev, 0x1, 0xf, 0x17,
+ SLAVE_DSP_READY_TIME_MASK | MASTER_DSP_READY_TIME_MASK,
+ FIELD_PREP(SLAVE_DSP_READY_TIME_MASK, 0x18) |
+ FIELD_PREP(MASTER_DSP_READY_TIME_MASK, 0x18));
+
+ __mtk_tr_set_bits(phydev, 0x1, 0xf, 0x18,
+ ENABLE_RANDOM_UPDOWN_COUNTER_TRIGGER);
+
+ __mtk_tr_modify(phydev, 0x0, 0x7, 0x15,
+ NORMAL_MSE_LO_THRESH_MASK,
+ FIELD_PREP(NORMAL_MSE_LO_THRESH_MASK, 0x55));
+
+ __mtk_tr_modify(phydev, 0x2, 0xd, 0x0,
+ FFE_UPDATE_GAIN_FORCE_VAL_MASK,
+ FIELD_PREP(FFE_UPDATE_GAIN_FORCE_VAL_MASK, 0x4) |
+ FFE_UPDATE_GAIN_FORCE);
+
+ __mtk_tr_clr_bits(phydev, 0x2, 0xd, 0x3, TR_FREEZE_MASK);
+
+ __mtk_tr_modify(phydev, 0x2, 0xd, 0x6,
+ SS_TR_KP100_MASK | SS_TR_KF100_MASK |
+ SS_TR_KP1000_MASTER_MASK | SS_TR_KF1000_MASTER_MASK |
+ SS_TR_KP1000_SLAVE_MASK | SS_TR_KF1000_SLAVE_MASK,
+ FIELD_PREP(SS_TR_KP100_MASK, 0x5) |
+ FIELD_PREP(SS_TR_KF100_MASK, 0x6) |
+ FIELD_PREP(SS_TR_KP1000_MASTER_MASK, 0x5) |
+ FIELD_PREP(SS_TR_KF1000_MASTER_MASK, 0x6) |
+ FIELD_PREP(SS_TR_KP1000_SLAVE_MASK, 0x5) |
+ FIELD_PREP(SS_TR_KF1000_SLAVE_MASK, 0x6));
+
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
}
@@ -735,27 +832,29 @@ static void mt7981_phy_finetune(struct p
}
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* ResetSyncOffset = 6 */
- __phy_write(phydev, 0x11, 0x600);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8fc0);
-
- /* VgaDecRate = 1 */
- __phy_write(phydev, 0x11, 0x4c2a);
- __phy_write(phydev, 0x12, 0x3e);
- __phy_write(phydev, 0x10, 0x8fa4);
+ __mtk_tr_modify(phydev, 0x1, 0xf, 0x20,
+ RESET_SYNC_OFFSET_MASK,
+ FIELD_PREP(RESET_SYNC_OFFSET_MASK, 0x6));
+
+ __mtk_tr_modify(phydev, 0x1, 0xf, 0x12,
+ VGA_DECIMATION_RATE_MASK,
+ FIELD_PREP(VGA_DECIMATION_RATE_MASK, 0x1));
/* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
* MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
*/
- __phy_write(phydev, 0x11, 0xd10a);
- __phy_write(phydev, 0x12, 0x34);
- __phy_write(phydev, 0x10, 0x8f82);
+ __mtk_tr_modify(phydev, 0x1, 0xf, 0x1,
+ MRVL_TR_FIX_100KP_MASK | MRVL_TR_FIX_100KF_MASK |
+ MRVL_TR_FIX_1000KP_MASK | MRVL_TR_FIX_1000KF_MASK,
+ FIELD_PREP(MRVL_TR_FIX_100KP_MASK, 0x3) |
+ FIELD_PREP(MRVL_TR_FIX_100KF_MASK, 0x2) |
+ FIELD_PREP(MRVL_TR_FIX_1000KP_MASK, 0x3) |
+ FIELD_PREP(MRVL_TR_FIX_1000KF_MASK, 0x2));
/* VcoSlicerThreshBitsHigh */
- __phy_write(phydev, 0x11, 0x5555);
- __phy_write(phydev, 0x12, 0x55);
- __phy_write(phydev, 0x10, 0x8ec0);
+ __mtk_tr_modify(phydev, 0x1, 0xd, 0x20,
+ VCO_SLICER_THRESH_HIGH_MASK,
+ FIELD_PREP(VCO_SLICER_THRESH_HIGH_MASK, 0x555555));
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
/* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */
@@ -807,25 +906,23 @@ static void mt7988_phy_finetune(struct p
phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* ResetSyncOffset = 5 */
- __phy_write(phydev, 0x11, 0x500);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8fc0);
+ __mtk_tr_modify(phydev, 0x1, 0xf, 0x20,
+ RESET_SYNC_OFFSET_MASK,
+ FIELD_PREP(RESET_SYNC_OFFSET_MASK, 0x5));
/* VgaDecRate is 1 at default on mt7988 */
- /* MrvlTrFix100Kp = 6, MrvlTrFix100Kf = 7,
- * MrvlTrFix1000Kp = 6, MrvlTrFix1000Kf = 7
- */
- __phy_write(phydev, 0x11, 0xb90a);
- __phy_write(phydev, 0x12, 0x6f);
- __phy_write(phydev, 0x10, 0x8f82);
-
- /* RemAckCntLimitCtrl = 1 */
- __phy_write(phydev, 0x11, 0xfbba);
- __phy_write(phydev, 0x12, 0xc3);
- __phy_write(phydev, 0x10, 0x87f8);
-
+ __mtk_tr_modify(phydev, 0x1, 0xf, 0x1,
+ MRVL_TR_FIX_100KP_MASK | MRVL_TR_FIX_100KF_MASK |
+ MRVL_TR_FIX_1000KP_MASK | MRVL_TR_FIX_1000KF_MASK,
+ FIELD_PREP(MRVL_TR_FIX_100KP_MASK, 0x6) |
+ FIELD_PREP(MRVL_TR_FIX_100KF_MASK, 0x7) |
+ FIELD_PREP(MRVL_TR_FIX_1000KP_MASK, 0x6) |
+ FIELD_PREP(MRVL_TR_FIX_1000KF_MASK, 0x7));
+
+ __mtk_tr_modify(phydev, 0x0, 0xf, 0x3c,
+ REMOTE_ACK_COUNT_LIMIT_CTRL_MASK,
+ FIELD_PREP(REMOTE_ACK_COUNT_LIMIT_CTRL_MASK, 0x1));
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
/* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */
@@ -901,45 +998,37 @@ static void mt798x_phy_eee(struct phy_de
MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* Regsigdet_sel_1000 = 0 */
- __phy_write(phydev, 0x11, 0xb);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9690);
-
- /* REG_EEE_st2TrKf1000 = 2 */
- __phy_write(phydev, 0x11, 0x114f);
- __phy_write(phydev, 0x12, 0x2);
- __phy_write(phydev, 0x10, 0x969a);
-
- /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
- __phy_write(phydev, 0x11, 0x3028);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x969e);
-
- /* RegEEE_slv_wake_int_timer_tar = 8 */
- __phy_write(phydev, 0x11, 0x5010);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96a0);
-
- /* RegEEE_trfreeze_timer2 = 586 */
- __phy_write(phydev, 0x11, 0x24a);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96a8);
-
- /* RegEEE100Stg1_tar = 16 */
- __phy_write(phydev, 0x11, 0x3210);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96b8);
-
- /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 0 */
- __phy_write(phydev, 0x11, 0x1463);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96ca);
-
- /* DfeTailEnableVgaThresh1000 = 27 */
- __phy_write(phydev, 0x11, 0x36);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8f80);
+ __mtk_tr_clr_bits(phydev, 0x2, 0xd, 0x8,
+ EEE1000_SELECT_SIGNAL_DETECTION_FROM_DFE);
+
+ __mtk_tr_modify(phydev, 0x2, 0xd, 0xd,
+ EEE1000_STAGE2_TR_KF_MASK,
+ FIELD_PREP(EEE1000_STAGE2_TR_KF_MASK, 0x2));
+
+ __mtk_tr_modify(phydev, 0x2, 0xd, 0xf,
+ SLAVE_WAKETR_TIMER_MASK | SLAVE_REMTX_TIMER_MASK,
+ FIELD_PREP(SLAVE_WAKETR_TIMER_MASK, 0x6) |
+ FIELD_PREP(SLAVE_REMTX_TIMER_MASK, 0x14));
+
+ __mtk_tr_modify(phydev, 0x2, 0xd, 0x10,
+ SLAVE_WAKEINT_TIMER_MASK,
+ FIELD_PREP(SLAVE_WAKEINT_TIMER_MASK, 0x8));
+
+ __mtk_tr_modify(phydev, 0x2, 0xd, 0x14,
+ TR_FREEZE_TIMER2_MASK,
+ FIELD_PREP(TR_FREEZE_TIMER2_MASK, 0x24a));
+
+ __mtk_tr_modify(phydev, 0x2, 0xd, 0x1c,
+ EEE100_LPSYNC_STAGE1_UPDATE_TIMER_MASK,
+ FIELD_PREP(EEE100_LPSYNC_STAGE1_UPDATE_TIMER_MASK,
+ 0x10));
+
+ __mtk_tr_clr_bits(phydev, 0x2, 0xd, 0x25,
+ WAKE_SLAVE_TR_WAIT_DFE_DETECTION_EN);
+
+ __mtk_tr_modify(phydev, 0x1, 0xf, 0x0,
+ DFE_TAIL_EANBLE_VGA_TRHESH_1000,
+ FIELD_PREP(DFE_TAIL_EANBLE_VGA_TRHESH_1000, 0x1b));
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -9,13 +9,35 @@
#define MTK_GPHY_ID_MT7530 0x03a29412
#define MTK_GPHY_ID_MT7531 0x03a29441
-#define MTK_EXT_PAGE_ACCESS 0x1f
-#define MTK_PHY_PAGE_STANDARD 0x0000
-#define MTK_PHY_PAGE_EXTENDED 0x0001
-#define MTK_PHY_PAGE_EXTENDED_2 0x0002
-#define MTK_PHY_PAGE_EXTENDED_3 0x0003
-#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
-#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
+#define MTK_PHY_PAGE_EXTENDED_1 0x0001
+#define MTK_PHY_AUX_CTRL_AND_STATUS 0x14
+#define MTK_PHY_ENABLE_DOWNSHIFT BIT(4)
+
+#define MTK_PHY_PAGE_EXTENDED_2 0x0002
+#define MTK_PHY_PAGE_EXTENDED_3 0x0003
+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG11 0x11
+
+#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
+
+/* Registers on Token Ring debug nodes */
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x17 */
+#define SLAVE_DSP_READY_TIME_MASK GENMASK(22, 15)
+
+/* Registers on MDIO_MMD_VEND1 */
+#define MTK_PHY_GBE_MODE_TX_DELAY_SEL 0x13
+#define MTK_PHY_TEST_MODE_TX_DELAY_SEL 0x14
+#define MTK_TX_DELAY_PAIR_B_MASK GENMASK(10, 8)
+#define MTK_TX_DELAY_PAIR_D_MASK GENMASK(2, 0)
+
+#define MTK_PHY_MCC_CTRL_AND_TX_POWER_CTRL 0xa6
+#define MTK_MCC_NEARECHO_OFFSET_MASK GENMASK(15, 8)
+
+#define MTK_PHY_RXADC_CTRL_RG7 0xc6
+#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8)
+
+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG123 0x123
+#define MTK_PHY_LPI_NORM_MSE_LO_THRESH100_MASK GENMASK(15, 8)
+#define MTK_PHY_LPI_NORM_MSE_HI_THRESH100_MASK GENMASK(7, 0)
struct mtk_gephy_priv {
unsigned long led_state;
@@ -27,20 +49,29 @@ static void mtk_gephy_config_init(struct
phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
/* Enable HW auto downshift */
- phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
+ phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED_1,
+ MTK_PHY_AUX_CTRL_AND_STATUS,
+ 0, MTK_PHY_ENABLE_DOWNSHIFT);
/* Increase SlvDPSready time */
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- __phy_write(phydev, 0x10, 0xafae);
- __phy_write(phydev, 0x12, 0x2f);
- __phy_write(phydev, 0x10, 0x8fae);
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+ mtk_tr_modify(phydev, 0x1, 0xf, 0x17, SLAVE_DSP_READY_TIME_MASK,
+ FIELD_PREP(SLAVE_DSP_READY_TIME_MASK, 0x5e));
/* Adjust 100_mse_threshold */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
-
- /* Disable mcc */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG123,
+ MTK_PHY_LPI_NORM_MSE_LO_THRESH100_MASK |
+ MTK_PHY_LPI_NORM_MSE_HI_THRESH100_MASK,
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_LO_THRESH100_MASK,
+ 0xff) |
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH100_MASK,
+ 0xff));
+
+ /* If echo time is narrower than 0x3, it will be regarded as noise */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_MCC_CTRL_AND_TX_POWER_CTRL,
+ MTK_MCC_NEARECHO_OFFSET_MASK,
+ FIELD_PREP(MTK_MCC_NEARECHO_OFFSET_MASK, 0x3));
}
static int mt7530_phy_config_init(struct phy_device *phydev)
@@ -48,7 +79,8 @@ static int mt7530_phy_config_init(struct
mtk_gephy_config_init(phydev);
/* Increase post_update_timer */
- phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b);
+ phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3,
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG11, 0x4b);
return 0;
}
@@ -89,11 +121,19 @@ static int mt7531_phy_config_init(struct
/* PHY link down power saving enable */
phy_set_bits(phydev, 0x17, BIT(4));
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
+ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK,
+ FIELD_PREP(MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3));
/* Set TX Pair delay selection */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_GBE_MODE_TX_DELAY_SEL,
+ MTK_TX_DELAY_PAIR_B_MASK | MTK_TX_DELAY_PAIR_D_MASK,
+ FIELD_PREP(MTK_TX_DELAY_PAIR_B_MASK, 0x4) |
+ FIELD_PREP(MTK_TX_DELAY_PAIR_D_MASK, 0x4));
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TEST_MODE_TX_DELAY_SEL,
+ MTK_TX_DELAY_PAIR_B_MASK | MTK_TX_DELAY_PAIR_D_MASK,
+ FIELD_PREP(MTK_TX_DELAY_PAIR_B_MASK, 0x4) |
+ FIELD_PREP(MTK_TX_DELAY_PAIR_D_MASK, 0x4));
/* LED Config*/
mt7530_led_config_of(phydev);
--- a/drivers/net/phy/mediatek/mtk-phy-lib.c
+++ b/drivers/net/phy/mediatek/mtk-phy-lib.c
@@ -6,6 +6,97 @@
#include "mtk.h"
+/* Difference between functions with mtk_tr* and __mtk_tr* prefixes is
+ * mtk_tr* functions: wrapped by page switching operations
+ * __mtk_tr* functions: no page switching operations
+ */
+
+static void __mtk_tr_access(struct phy_device *phydev, bool read, u8 ch_addr,
+ u8 node_addr, u8 data_addr)
+{
+ u16 tr_cmd = BIT(15); /* bit 14 & 0 are reserved */
+
+ if (read)
+ tr_cmd |= BIT(13);
+
+ tr_cmd |= (((ch_addr & 0x3) << 11) |
+ ((node_addr & 0xf) << 7) |
+ ((data_addr & 0x3f) << 1));
+ dev_dbg(&phydev->mdio.dev, "tr_cmd: 0x%x\n", tr_cmd);
+ __phy_write(phydev, 0x10, tr_cmd);
+}
+
+static void __mtk_tr_read(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u16 *tr_high, u16 *tr_low)
+{
+ __mtk_tr_access(phydev, true, ch_addr, node_addr, data_addr);
+ *tr_low = __phy_read(phydev, 0x11);
+ *tr_high = __phy_read(phydev, 0x12);
+ dev_dbg(&phydev->mdio.dev, "tr_high read: 0x%x, tr_low read: 0x%x\n",
+ *tr_high, *tr_low);
+}
+
+u32 mtk_tr_read(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr)
+{
+ u16 tr_high;
+ u16 tr_low;
+
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ __mtk_tr_read(phydev, ch_addr, node_addr, data_addr, &tr_high, &tr_low);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+ return (tr_high << 16) | tr_low;
+}
+EXPORT_SYMBOL_GPL(mtk_tr_read);
+
+static void __mtk_tr_write(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u32 tr_data)
+{
+ __phy_write(phydev, 0x11, tr_data & 0xffff);
+ __phy_write(phydev, 0x12, tr_data >> 16);
+ dev_dbg(&phydev->mdio.dev, "tr_high write: 0x%x, tr_low write: 0x%x\n",
+ tr_data >> 16, tr_data & 0xffff);
+ __mtk_tr_access(phydev, false, ch_addr, node_addr, data_addr);
+}
+
+void __mtk_tr_modify(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u32 mask, u32 set)
+{
+ u32 tr_data;
+ u16 tr_high;
+ u16 tr_low;
+
+ __mtk_tr_read(phydev, ch_addr, node_addr, data_addr, &tr_high, &tr_low);
+ tr_data = (tr_high << 16) | tr_low;
+ tr_data = (tr_data & ~mask) | set;
+ __mtk_tr_write(phydev, ch_addr, node_addr, data_addr, tr_data);
+}
+EXPORT_SYMBOL_GPL(__mtk_tr_modify);
+
+void mtk_tr_modify(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u32 mask, u32 set)
+{
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ __mtk_tr_modify(phydev, ch_addr, node_addr, data_addr, mask, set);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+}
+EXPORT_SYMBOL_GPL(mtk_tr_modify);
+
+void __mtk_tr_set_bits(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u32 set)
+{
+ __mtk_tr_modify(phydev, ch_addr, node_addr, data_addr, 0, set);
+}
+EXPORT_SYMBOL_GPL(__mtk_tr_set_bits);
+
+void __mtk_tr_clr_bits(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u32 clr)
+{
+ __mtk_tr_modify(phydev, ch_addr, node_addr, data_addr, clr, 0);
+}
+EXPORT_SYMBOL_GPL(__mtk_tr_clr_bits);
+
int mtk_phy_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
--- a/drivers/net/phy/mediatek/mtk.h
+++ b/drivers/net/phy/mediatek/mtk.h
@@ -9,6 +9,8 @@
#define _MTK_EPHY_H_
#define MTK_EXT_PAGE_ACCESS 0x1f
+#define MTK_PHY_PAGE_STANDARD 0x0000
+#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
/* Registers on MDIO_MMD_VEND2 */
#define MTK_PHY_LED0_ON_CTRL 0x24
@@ -62,6 +64,17 @@
#define MTK_PHY_LED_STATE_FORCE_BLINK 1
#define MTK_PHY_LED_STATE_NETDEV 2
+u32 mtk_tr_read(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr);
+void __mtk_tr_modify(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u32 mask, u32 set);
+void mtk_tr_modify(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u32 mask, u32 set);
+void __mtk_tr_set_bits(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u32 set);
+void __mtk_tr_clr_bits(struct phy_device *phydev, u8 ch_addr, u8 node_addr,
+ u8 data_addr, u32 clr);
+
int mtk_phy_read_page(struct phy_device *phydev);
int mtk_phy_write_page(struct phy_device *phydev, int page);

209
target/linux/mediatek/patches-6.6/733-10-net-phy-mediatek-Extend-1G-TX-RX-link-pulse-time.patch Normal file
View File

@ -0,0 +1,209 @@
From 3c05195fc2c232cd853fc8cebf55310c4605111d Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:14 +0800
Subject: [PATCH 10/13] net: phy: mediatek: Extend 1G TX/RX link pulse time
We observe that some 10G devices' (mostly Marvell's chips inside) 1G
training time violates specification, which may last 2230ms and affect
later TX/RX link pulse time. This will invalidate MediaTek series
gigabit Ethernet PHYs' hardware auto downshift mechanism.
Without this patch, if someone is trying to use "4-wire" cable to
connect above devices, MediaTek' gigabit Ethernet PHYs may fail
to downshift to 100Mbps. (If partner 10G devices' downshift mechanism
stops at 1G)
This patch extends our 1G TX/RX link pulse time so that we can still
link up with those 10G devices.
Tested device:
- Netgear GS110EMX's 10G port (Marvell 88X3340P)
- QNAP QSW-M408-4C
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge-soc.c | 2 +
drivers/net/phy/mediatek/mtk-ge.c | 5 +-
drivers/net/phy/mediatek/mtk-phy-lib.c | 92 ++++++++++++++++++++++++++
drivers/net/phy/mediatek/mtk.h | 21 ++++++
4 files changed, 116 insertions(+), 4 deletions(-)
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -1396,6 +1396,7 @@ static struct phy_driver mtk_socphy_driv
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
.name = "MediaTek MT7981 PHY",
.config_init = mt798x_phy_config_init,
+ .read_status = mtk_gphy_cl22_read_status,
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
.probe = mt7981_phy_probe,
@@ -1413,6 +1414,7 @@ static struct phy_driver mtk_socphy_driv
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
.name = "MediaTek MT7988 PHY",
.config_init = mt798x_phy_config_init,
+ .read_status = mtk_gphy_cl22_read_status,
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
.probe = mt7988_phy_probe,
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -9,10 +9,6 @@
#define MTK_GPHY_ID_MT7530 0x03a29412
#define MTK_GPHY_ID_MT7531 0x03a29441
-#define MTK_PHY_PAGE_EXTENDED_1 0x0001
-#define MTK_PHY_AUX_CTRL_AND_STATUS 0x14
-#define MTK_PHY_ENABLE_DOWNSHIFT BIT(4)
-
#define MTK_PHY_PAGE_EXTENDED_2 0x0002
#define MTK_PHY_PAGE_EXTENDED_3 0x0003
#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG11 0x11
@@ -251,6 +247,7 @@ static struct phy_driver mtk_gephy_drive
.name = "MediaTek MT7531 PHY",
.probe = mt7531_phy_probe,
.config_init = mt7531_phy_config_init,
+ .read_status = mtk_gphy_cl22_read_status,
/* Interrupts are handled by the switch, not the PHY
* itself.
*/
--- a/drivers/net/phy/mediatek/mtk-phy-lib.c
+++ b/drivers/net/phy/mediatek/mtk-phy-lib.c
@@ -109,6 +109,98 @@ int mtk_phy_write_page(struct phy_device
}
EXPORT_SYMBOL_GPL(mtk_phy_write_page);
+/* This function deals with the case that 1G AN starts but isn't completed. We
+ * set AN_NEW_LP_CNT_LIMIT with different values time after time to let our
+ * 1G->100Mbps hardware automatic downshift to fit more partner devices.
+ */
+static int extend_an_new_lp_cnt_limit(struct phy_device *phydev)
+{
+ int mmd_read_ret;
+ u32 reg_val;
+ int timeout;
+
+ /* According to table 28-9 & Figure 28-18 in IEEE 802.3,
+ * link_fail_inhibit_timer of 10/100/1000 Mbps devices ranges from 750
+ * to "1000ms". Once MTK_PHY_FINAL_SPEED_1000 is set, it means that we
+ * enter "FLP LINK GOOD CHECK" state, link_fail_inhibit_timer starts and
+ * this PHY's 1G training starts. If 1G training never starts, we do
+ * nothing but leave.
+ */
+ timeout = read_poll_timeout(mmd_read_ret = phy_read_mmd, reg_val,
+ (mmd_read_ret < 0) ||
+ reg_val & MTK_PHY_FINAL_SPEED_1000,
+ 10000, 1000000, false, phydev,
+ MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC);
+ if (mmd_read_ret < 0)
+ return mmd_read_ret;
+
+ if (!timeout) {
+ /* Once we found MTK_PHY_FINAL_SPEED_1000 is set, no matter 1G
+ * AN is completed or not, we'll set AN_NEW_LP_CNT_LIMIT again
+ * and again.
+ */
+ mtk_tr_modify(phydev, 0x0, 0xf, 0x3c, AN_NEW_LP_CNT_LIMIT_MASK,
+ FIELD_PREP(AN_NEW_LP_CNT_LIMIT_MASK, 0xf));
+ mdelay(1500);
+
+ timeout = read_poll_timeout(mtk_tr_read, reg_val,
+ (reg_val & AN_STATE_MASK) !=
+ (AN_STATE_TX_DISABLE <<
+ AN_STATE_SHIFT),
+ 10000, 1000000, false, phydev,
+ 0x0, 0xf, 0x2);
+ if (!timeout) {
+ mdelay(625);
+ mtk_tr_modify(phydev, 0x0, 0xf, 0x3c,
+ AN_NEW_LP_CNT_LIMIT_MASK,
+ FIELD_PREP(AN_NEW_LP_CNT_LIMIT_MASK,
+ 0x8));
+ mdelay(500);
+ mtk_tr_modify(phydev, 0x0, 0xf, 0x3c,
+ AN_NEW_LP_CNT_LIMIT_MASK,
+ FIELD_PREP(AN_NEW_LP_CNT_LIMIT_MASK,
+ 0xf));
+ } else {
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+int mtk_gphy_cl22_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_read_status(phydev);
+ if (ret)
+ return ret;
+
+ if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete) {
+ ret = phy_read_paged(phydev, MTK_PHY_PAGE_EXTENDED_1,
+ MTK_PHY_AUX_CTRL_AND_STATUS);
+ if (ret < 0)
+ return ret;
+
+ /* Once LP_DETECTED is set, it means that"ability_match" in
+ * IEEE 802.3 Figure 28-18 is set. This happens after we plug in
+ * cable. Also, LP_DETECTED will be cleared after AN complete.
+ */
+ if (!FIELD_GET(MTK_PHY_LP_DETECTED_MASK, ret))
+ return 0;
+
+ ret = phy_read(phydev, MII_CTRL1000);
+ if (ret & (ADVERTISE_1000FULL | ADVERTISE_1000HALF)) {
+ ret = extend_an_new_lp_cnt_limit(phydev);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_gphy_cl22_read_status);
+
int mtk_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
unsigned long rules,
unsigned long supported_triggers)
--- a/drivers/net/phy/mediatek/mtk.h
+++ b/drivers/net/phy/mediatek/mtk.h
@@ -10,8 +10,28 @@
#define MTK_EXT_PAGE_ACCESS 0x1f
#define MTK_PHY_PAGE_STANDARD 0x0000
+#define MTK_PHY_PAGE_EXTENDED_1 0x0001
+#define MTK_PHY_AUX_CTRL_AND_STATUS 0x14
+/* suprv_media_select_RefClk */
+#define MTK_PHY_LP_DETECTED_MASK GENMASK(7, 6)
+#define MTK_PHY_ENABLE_DOWNSHIFT BIT(4)
+
#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
+/* Registers on Token Ring debug nodes */
+/* ch_addr = 0x0, node_addr = 0xf, data_addr = 0x2 */
+#define AN_STATE_MASK GENMASK(22, 19)
+#define AN_STATE_SHIFT 19
+#define AN_STATE_TX_DISABLE 1
+
+/* ch_addr = 0x0, node_addr = 0xf, data_addr = 0x3c */
+#define AN_NEW_LP_CNT_LIMIT_MASK GENMASK(23, 20)
+#define AUTO_NP_10XEN BIT(6)
+
+/* Registers on MDIO_MMD_VEND1 */
+#define MTK_PHY_LINK_STATUS_MISC (0xa2)
+#define MTK_PHY_FINAL_SPEED_1000 BIT(3)
+
/* Registers on MDIO_MMD_VEND2 */
#define MTK_PHY_LED0_ON_CTRL 0x24
#define MTK_PHY_LED1_ON_CTRL 0x26
@@ -78,6 +98,7 @@ void __mtk_tr_clr_bits(struct phy_device
int mtk_phy_read_page(struct phy_device *phydev);
int mtk_phy_write_page(struct phy_device *phydev, int page);
+int mtk_gphy_cl22_read_status(struct phy_device *phydev);
int mtk_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
unsigned long rules,
unsigned long supported_triggers);

477
target/linux/mediatek/patches-6.6/733-11-net-phy-add-driver-for-built-in-2.5G-ethernet-PHY-on.patch Normal file
View File

@ -0,0 +1,477 @@
From 69ca89165e39e6b6f4c79e6b4c03559e0fac7051 Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:15 +0800
Subject: [PATCH 11/13] net: phy: add driver for built-in 2.5G ethernet PHY on
MT7988
Add support for internal 2.5Gphy on MT7988. This driver will load
necessary firmware, add appropriate time delay and figure out LED.
Also, certain control registers will be set to fix link-up issues.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/Kconfig | 11 +
drivers/net/phy/mediatek/Makefile | 1 +
drivers/net/phy/mediatek/mtk-2p5ge.c | 432 +++++++++++++++++++++++++++
4 files changed, 445 insertions(+)
create mode 100644 drivers/net/phy/mediatek/mtk-2p5ge.c
--- a/drivers/net/phy/mediatek/Kconfig
+++ b/drivers/net/phy/mediatek/Kconfig
@@ -25,3 +25,14 @@ config MEDIATEK_GE_SOC_PHY
the MT7981 and MT7988 SoCs. These PHYs need calibration data
present in the SoCs efuse and will dynamically calibrate VCM
(common-mode voltage) during startup.
+
+config MEDIATEK_2P5GE_PHY
+ tristate "MediaTek 2.5Gb Ethernet PHYs"
+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
+ select MTK_NET_PHYLIB
+ help
+ Supports MediaTek SoC built-in 2.5Gb Ethernet PHYs.
+
+ This will load necessary firmware and add appropriate time delay.
+ Accelerate this procedure through internal pbus instead of MDIO
+ bus. Certain link-up issues will also be fixed here.
--- a/drivers/net/phy/mediatek/Makefile
+++ b/drivers/net/phy/mediatek/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_MTK_NET_PHYLIB) += mtk-phy-lib.o
obj-$(CONFIG_MEDIATEK_GE_PHY) += mtk-ge.o
obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mtk-ge-soc.o
+obj-$(CONFIG_MEDIATEK_2P5GE_PHY) += mtk-2p5ge.o
--- /dev/null
+++ b/drivers/net/phy/mediatek/mtk-2p5ge.c
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/bitfield.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/phy.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+#include "mtk.h"
+
+#define MTK_2P5GPHY_ID_MT7988 (0x00339c11)
+
+#define MT7988_2P5GE_PMB_FW "mediatek/mt7988/i2p5ge-phy-pmb.bin"
+#define MT7988_2P5GE_PMB_FW_SIZE (0x20000)
+#define MT7988_2P5GE_PMB_FW_BASE (0x0f100000)
+#define MT7988_2P5GE_PMB_FW_LEN (0x20000)
+#define MT7988_2P5GE_MD32_EN_CFG_BASE (0x0f0f0018)
+#define MT7988_2P5GE_MD32_EN_CFG_LEN (0x20)
+#define MD32_EN BIT(0)
+
+#define BASE100T_STATUS_EXTEND (0x10)
+#define BASE1000T_STATUS_EXTEND (0x11)
+#define EXTEND_CTRL_AND_STATUS (0x16)
+
+#define PHY_AUX_CTRL_STATUS (0x1d)
+#define PHY_AUX_DPX_MASK GENMASK(5, 5)
+#define PHY_AUX_SPEED_MASK GENMASK(4, 2)
+
+#define MTK_PHY_LPI_PCS_DSP_CTRL (0x121)
+#define MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK GENMASK(12, 8)
+
+/* Registers on Token Ring debug nodes */
+/* ch_addr = 0x0, node_addr = 0xf, data_addr = 0x3c */
+#define AUTO_NP_10XEN BIT(6)
+
+struct mtk_i2p5ge_phy_priv {
+ bool fw_loaded;
+ unsigned long led_state;
+};
+
+enum {
+ PHY_AUX_SPD_10 = 0,
+ PHY_AUX_SPD_100,
+ PHY_AUX_SPD_1000,
+ PHY_AUX_SPD_2500,
+};
+
+static int mt798x_2p5ge_phy_load_fw(struct phy_device *phydev)
+{
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+ void __iomem *md32_en_cfg_base, *pmb_addr;
+ struct device *dev = &phydev->mdio.dev;
+ const struct firmware *fw;
+ int ret, i;
+ u16 reg;
+
+ if (priv->fw_loaded)
+ return 0;
+
+ pmb_addr = ioremap(MT7988_2P5GE_PMB_FW_BASE, MT7988_2P5GE_PMB_FW_LEN);
+ if (!pmb_addr)
+ return -ENOMEM;
+ md32_en_cfg_base = ioremap(MT7988_2P5GE_MD32_EN_CFG_BASE,
+ MT7988_2P5GE_MD32_EN_CFG_LEN);
+ if (!md32_en_cfg_base) {
+ ret = -ENOMEM;
+ goto free_pmb;
+ }
+
+ ret = request_firmware(&fw, MT7988_2P5GE_PMB_FW, dev);
+ if (ret) {
+ dev_err(dev, "failed to load firmware: %s, ret: %d\n",
+ MT7988_2P5GE_PMB_FW, ret);
+ goto free;
+ }
+
+ if (fw->size != MT7988_2P5GE_PMB_FW_SIZE) {
+ dev_err(dev, "Firmware size 0x%zx != 0x%x\n",
+ fw->size, MT7988_2P5GE_PMB_FW_SIZE);
+ ret = -EINVAL;
+ goto release_fw;
+ }
+
+ reg = readw(md32_en_cfg_base);
+ if (reg & MD32_EN) {
+ phy_set_bits(phydev, MII_BMCR, BMCR_RESET);
+ usleep_range(10000, 11000);
+ }
+ phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN);
+
+ /* Write magic number to safely stall MCU */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800e, 0x1100);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800f, 0x00df);
+
+ for (i = 0; i < MT7988_2P5GE_PMB_FW_SIZE - 1; i += 4)
+ writel(*((uint32_t *)(fw->data + i)), pmb_addr + i);
+ dev_info(dev, "Firmware date code: %x/%x/%x, version: %x.%x\n",
+ be16_to_cpu(*((__be16 *)(fw->data +
+ MT7988_2P5GE_PMB_FW_SIZE - 8))),
+ *(fw->data + MT7988_2P5GE_PMB_FW_SIZE - 6),
+ *(fw->data + MT7988_2P5GE_PMB_FW_SIZE - 5),
+ *(fw->data + MT7988_2P5GE_PMB_FW_SIZE - 2),
+ *(fw->data + MT7988_2P5GE_PMB_FW_SIZE - 1));
+
+ writew(reg & ~MD32_EN, md32_en_cfg_base);
+ writew(reg | MD32_EN, md32_en_cfg_base);
+ phy_set_bits(phydev, MII_BMCR, BMCR_RESET);
+ /* We need a delay here to stabilize initialization of MCU */
+ usleep_range(7000, 8000);
+ dev_info(dev, "Firmware loading/trigger ok.\n");
+
+ priv->fw_loaded = true;
+
+release_fw:
+ release_firmware(fw);
+free:
+ iounmap(md32_en_cfg_base);
+free_pmb:
+ iounmap(pmb_addr);
+
+ return ret;
+}
+
+static int mt798x_2p5ge_phy_config_init(struct phy_device *phydev)
+{
+ struct pinctrl *pinctrl;
+ int ret;
+
+ /* Check if PHY interface type is compatible */
+ if (phydev->interface != PHY_INTERFACE_MODE_INTERNAL)
+ return -ENODEV;
+
+ ret = mt798x_2p5ge_phy_load_fw(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Setup LED */
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED_ON_POLARITY | MTK_PHY_LED_ON_LINK10 |
+ MTK_PHY_LED_ON_LINK100 | MTK_PHY_LED_ON_LINK1000 |
+ MTK_PHY_LED_ON_LINK2500);
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
+ MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX);
+
+ /* Switch pinctrl after setting polarity to avoid bogus blinking */
+ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "i2p5gbe-led");
+ if (IS_ERR(pinctrl))
+ dev_err(&phydev->mdio.dev, "Fail to set LED pins!\n");
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LPI_PCS_DSP_CTRL,
+ MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK, 0);
+
+ /* Enable 16-bit next page exchange bit if 1000-BT isn't advertising */
+ mtk_tr_modify(phydev, 0x0, 0xf, 0x3c, AUTO_NP_10XEN,
+ FIELD_PREP(AUTO_NP_10XEN, 0x1));
+
+ /* Enable HW auto downshift */
+ phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED_1,
+ MTK_PHY_AUX_CTRL_AND_STATUS,
+ 0, MTK_PHY_ENABLE_DOWNSHIFT);
+
+ return 0;
+}
+
+static int mt798x_2p5ge_phy_config_aneg(struct phy_device *phydev)
+{
+ bool changed = false;
+ u32 adv;
+ int ret;
+
+ /* In fact, if we disable autoneg, we can't link up correctly:
+ * 2.5G/1G: Need AN to exchange master/slave information.
+ * 100M/10M: Without AN, link starts at half duplex (According to
+ * IEEE 802.3-2018), which this phy doesn't support.
+ */
+ if (phydev->autoneg == AUTONEG_DISABLE)
+ return -EOPNOTSUPP;
+
+ ret = genphy_c45_an_config_aneg(phydev);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ /* Clause 45 doesn't define 1000BaseT support. Use Clause 22 instead in
+ * our design.
+ */
+ adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
+ ret = phy_modify_changed(phydev, MII_CTRL1000, ADVERTISE_1000FULL, adv);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int mt798x_2p5ge_phy_get_features(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_c45_pma_read_abilities(phydev);
+ if (ret)
+ return ret;
+
+ /* This phy can't handle collision, and neither can (XFI)MAC it's
+ * connected to. Although it can do HDX handshake, it doesn't support
+ * CSMA/CD that HDX requires.
+ */
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+ phydev->supported);
+
+ return 0;
+}
+
+static int mt798x_2p5ge_phy_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ /* When MDIO_STAT1_LSTATUS is raised genphy_c45_read_link(), this phy
+ * actually hasn't finished AN. So use CL22's link update function
+ * instead.
+ */
+ ret = genphy_update_link(phydev);
+ if (ret)
+ return ret;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ /* We'll read link speed through vendor specific registers down below.
+ * So remove phy_resolve_aneg_linkmode (AN on) & genphy_c45_read_pma
+ * (AN off).
+ */
+ if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+ ret = genphy_c45_read_lpa(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Clause 45 doesn't define 1000BaseT support. Read the link
+ * partner's 1G advertisement via Clause 22.
+ */
+ ret = phy_read(phydev, MII_STAT1000);
+ if (ret < 0)
+ return ret;
+ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
+ } else if (phydev->autoneg == AUTONEG_DISABLE) {
+ linkmode_zero(phydev->lp_advertising);
+ }
+
+ if (phydev->link) {
+ ret = phy_read(phydev, PHY_AUX_CTRL_STATUS);
+ if (ret < 0)
+ return ret;
+
+ switch (FIELD_GET(PHY_AUX_SPEED_MASK, ret)) {
+ case PHY_AUX_SPD_10:
+ phydev->speed = SPEED_10;
+ break;
+ case PHY_AUX_SPD_100:
+ phydev->speed = SPEED_100;
+ break;
+ case PHY_AUX_SPD_1000:
+ phydev->speed = SPEED_1000;
+ break;
+ case PHY_AUX_SPD_2500:
+ phydev->speed = SPEED_2500;
+ break;
+ }
+
+ phydev->duplex = DUPLEX_FULL;
+ /* FIXME:
+ * The current firmware always enables rate adaptation mode.
+ */
+ phydev->rate_matching = RATE_MATCH_PAUSE;
+ }
+
+ return 0;
+}
+
+static int mt798x_2p5ge_phy_get_rate_matching(struct phy_device *phydev,
+ phy_interface_t iface)
+{
+ return RATE_MATCH_PAUSE;
+}
+
+static const unsigned long supported_triggers =
+ BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
+ BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_10) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_LINK_2500) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX);
+
+static int mt798x_2p5ge_phy_led_blink_set(struct phy_device *phydev, u8 index,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+ bool blinking = false;
+ int err = 0;
+
+ err = mtk_phy_led_num_dly_cfg(index, delay_on, delay_off, &blinking);
+ if (err < 0)
+ return err;
+
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state,
+ blinking);
+ if (err)
+ return err;
+
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state,
+ MTK_2P5GPHY_LED_ON_MASK, false);
+}
+
+static int mt798x_2p5ge_phy_led_brightness_set(struct phy_device *phydev,
+ u8 index,
+ enum led_brightness value)
+{
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+ int err;
+
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state, false);
+ if (err)
+ return err;
+
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state,
+ MTK_2P5GPHY_LED_ON_MASK,
+ (value != LED_OFF));
+}
+
+static int mt798x_2p5ge_phy_led_hw_is_supported(struct phy_device *phydev,
+ u8 index, unsigned long rules)
+{
+ return mtk_phy_led_hw_is_supported(phydev, index, rules,
+ supported_triggers);
+}
+
+static int mt798x_2p5ge_phy_led_hw_control_get(struct phy_device *phydev,
+ u8 index, unsigned long *rules)
+{
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+
+ return mtk_phy_led_hw_ctrl_get(phydev, index, rules, &priv->led_state,
+ MTK_2P5GPHY_LED_ON_SET,
+ MTK_2P5GPHY_LED_RX_BLINK_SET,
+ MTK_2P5GPHY_LED_TX_BLINK_SET);
+};
+
+static int mt798x_2p5ge_phy_led_hw_control_set(struct phy_device *phydev,
+ u8 index, unsigned long rules)
+{
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+
+ return mtk_phy_led_hw_ctrl_set(phydev, index, rules, &priv->led_state,
+ MTK_2P5GPHY_LED_ON_SET,
+ MTK_2P5GPHY_LED_RX_BLINK_SET,
+ MTK_2P5GPHY_LED_TX_BLINK_SET);
+};
+
+static int mt798x_2p5ge_phy_probe(struct phy_device *phydev)
+{
+ struct mtk_i2p5ge_phy_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev,
+ sizeof(struct mtk_i2p5ge_phy_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ switch (phydev->drv->phy_id) {
+ case MTK_2P5GPHY_ID_MT7988:
+ /* The original hardware only sets MDIO_DEVS_PMAPMD */
+ phydev->c45_ids.mmds_present |= MDIO_DEVS_PCS |
+ MDIO_DEVS_AN |
+ MDIO_DEVS_VEND1 |
+ MDIO_DEVS_VEND2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ priv->fw_loaded = false;
+ phydev->priv = priv;
+
+ mtk_phy_leds_state_init(phydev);
+
+ return 0;
+}
+
+static struct phy_driver mtk_2p5gephy_driver[] = {
+ {
+ PHY_ID_MATCH_MODEL(MTK_2P5GPHY_ID_MT7988),
+ .name = "MediaTek MT7988 2.5GbE PHY",
+ .probe = mt798x_2p5ge_phy_probe,
+ .config_init = mt798x_2p5ge_phy_config_init,
+ .config_aneg = mt798x_2p5ge_phy_config_aneg,
+ .get_features = mt798x_2p5ge_phy_get_features,
+ .read_status = mt798x_2p5ge_phy_read_status,
+ .get_rate_matching = mt798x_2p5ge_phy_get_rate_matching,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
+ .led_blink_set = mt798x_2p5ge_phy_led_blink_set,
+ .led_brightness_set = mt798x_2p5ge_phy_led_brightness_set,
+ .led_hw_is_supported = mt798x_2p5ge_phy_led_hw_is_supported,
+ .led_hw_control_get = mt798x_2p5ge_phy_led_hw_control_get,
+ .led_hw_control_set = mt798x_2p5ge_phy_led_hw_control_set,
+ },
+};
+
+module_phy_driver(mtk_2p5gephy_driver);
+
+static struct mdio_device_id __maybe_unused mtk_2p5ge_phy_tbl[] = {
+ { PHY_ID_MATCH_VENDOR(0x00339c00) },
+ { }
+};
+
+MODULE_DESCRIPTION("MediaTek 2.5Gb Ethernet PHY driver");
+MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(mdio, mtk_2p5ge_phy_tbl);
+MODULE_FIRMWARE(MT7988_2P5GE_PMB_FW);

130
target/linux/mediatek/patches-6.6/733-12-net-phy-mediatek-Fix-alignment-in-callback-functions.patch Normal file
View File

@ -0,0 +1,130 @@
From 07e90eb1819319a0c34b0cf3a57a4a3878e96e4d Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:16 +0800
Subject: [PATCH 12/13] net: phy: mediatek: Fix alignment in callback
functions' hook
Align declarations in mtk_gephy_driver(mtk-ge.c) and
mtk_socphy_driver(mtk-ge-soc.c). At first, some of them are
".foo<tab>= method_foo", and others are ".bar<space>= method_bar".
Use space instead for all of them here in case line is longer than
80 chars.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge-soc.c | 40 +++++++++++++--------------
drivers/net/phy/mediatek/mtk-ge.c | 34 +++++++++++------------
2 files changed, 37 insertions(+), 37 deletions(-)
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -1394,17 +1394,17 @@ static int mt7981_phy_probe(struct phy_d
static struct phy_driver mtk_socphy_driver[] = {
{
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
- .name = "MediaTek MT7981 PHY",
- .config_init = mt798x_phy_config_init,
- .read_status = mtk_gphy_cl22_read_status,
- .config_intr = genphy_no_config_intr,
+ .name = "MediaTek MT7981 PHY",
+ .config_init = mt798x_phy_config_init,
+ .read_status = mtk_gphy_cl22_read_status,
+ .config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
- .probe = mt7981_phy_probe,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_phy_read_page,
- .write_page = mtk_phy_write_page,
- .led_blink_set = mt798x_phy_led_blink_set,
+ .probe = mt7981_phy_probe,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
+ .led_blink_set = mt798x_phy_led_blink_set,
.led_brightness_set = mt798x_phy_led_brightness_set,
.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
.led_hw_control_set = mt798x_phy_led_hw_control_set,
@@ -1412,17 +1412,17 @@ static struct phy_driver mtk_socphy_driv
},
{
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
- .name = "MediaTek MT7988 PHY",
- .config_init = mt798x_phy_config_init,
- .read_status = mtk_gphy_cl22_read_status,
- .config_intr = genphy_no_config_intr,
+ .name = "MediaTek MT7988 PHY",
+ .config_init = mt798x_phy_config_init,
+ .read_status = mtk_gphy_cl22_read_status,
+ .config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
- .probe = mt7988_phy_probe,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_phy_read_page,
- .write_page = mtk_phy_write_page,
- .led_blink_set = mt798x_phy_led_blink_set,
+ .probe = mt7988_phy_probe,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
+ .led_blink_set = mt798x_phy_led_blink_set,
.led_brightness_set = mt798x_phy_led_brightness_set,
.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
.led_hw_control_set = mt798x_phy_led_hw_control_set,
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -230,34 +230,34 @@ static int mt753x_phy_led_hw_control_set
static struct phy_driver mtk_gephy_driver[] = {
{
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7530),
- .name = "MediaTek MT7530 PHY",
- .config_init = mt7530_phy_config_init,
+ .name = "MediaTek MT7530 PHY",
+ .config_init = mt7530_phy_config_init,
/* Interrupts are handled by the switch, not the PHY
* itself.
*/
- .config_intr = genphy_no_config_intr,
+ .config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_phy_read_page,
- .write_page = mtk_phy_write_page,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
},
{
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7531),
- .name = "MediaTek MT7531 PHY",
- .probe = mt7531_phy_probe,
- .config_init = mt7531_phy_config_init,
- .read_status = mtk_gphy_cl22_read_status,
+ .name = "MediaTek MT7531 PHY",
+ .probe = mt7531_phy_probe,
+ .config_init = mt7531_phy_config_init,
+ .read_status = mtk_gphy_cl22_read_status,
/* Interrupts are handled by the switch, not the PHY
* itself.
*/
- .config_intr = genphy_no_config_intr,
+ .config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_phy_read_page,
- .write_page = mtk_phy_write_page,
- .led_blink_set = mt753x_phy_led_blink_set,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
+ .led_blink_set = mt753x_phy_led_blink_set,
.led_brightness_set = mt753x_phy_led_brightness_set,
.led_hw_is_supported = mt753x_phy_led_hw_is_supported,
.led_hw_control_set = mt753x_phy_led_hw_control_set,

65
target/linux/mediatek/patches-6.6/733-13-net-phy-mediatek-Remove-unnecessary-outer-parens-of-.patch Normal file
View File

@ -0,0 +1,65 @@
From e59883b637ae317c2ac275b542e8a50670d76e7c Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Mon, 1 Jul 2024 18:54:17 +0800
Subject: [PATCH 13/13] net: phy: mediatek: Remove unnecessary outer parens of
"supported_triggers" var
This patch removes unnecessary outer parens of "supported_triggers" vars
in mtk-ge.c & mtk-ge-soc.c to improve readability.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge-soc.c | 16 ++++++++--------
drivers/net/phy/mediatek/mtk-ge.c | 16 ++++++++--------
2 files changed, 16 insertions(+), 16 deletions(-)
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -1224,14 +1224,14 @@ static int mt798x_phy_led_brightness_set
}
static const unsigned long supported_triggers =
- (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
- BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
- BIT(TRIGGER_NETDEV_LINK) |
- BIT(TRIGGER_NETDEV_LINK_10) |
- BIT(TRIGGER_NETDEV_LINK_100) |
- BIT(TRIGGER_NETDEV_LINK_1000) |
- BIT(TRIGGER_NETDEV_RX) |
- BIT(TRIGGER_NETDEV_TX));
+ BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
+ BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_10) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX);
static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
unsigned long rules)
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -189,14 +189,14 @@ static int mt753x_phy_led_brightness_set
}
static const unsigned long supported_triggers =
- (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
- BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
- BIT(TRIGGER_NETDEV_LINK) |
- BIT(TRIGGER_NETDEV_LINK_10) |
- BIT(TRIGGER_NETDEV_LINK_100) |
- BIT(TRIGGER_NETDEV_LINK_1000) |
- BIT(TRIGGER_NETDEV_RX) |
- BIT(TRIGGER_NETDEV_TX));
+ BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
+ BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_10) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX);
static int mt753x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
unsigned long rules)

39
target/linux/mediatek/patches-6.6/733-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch
View File

@ -1,39 +0,0 @@
From 128dc09b0af36772062142ce9e85b19c84ac789a Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Tue, 28 Feb 2023 17:53:37 +0000
Subject: [PATCH] net: phy: add driver for MediaTek 2.5G PHY
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/net/phy/Kconfig | 7 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mediatek-2p5ge.c | 220 +++++++++++++++++++++++++++++++
3 files changed, 226 insertions(+)
create mode 100644 drivers/net/phy/mediatek-2p5ge.c
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -330,6 +330,13 @@ config MEDIATEK_GE_SOC_PHY
present in the SoCs efuse and will dynamically calibrate VCM
(common-mode voltage) during startup.
+config MEDIATEK_2P5G_PHY
+ tristate "MediaTek 2.5G Ethernet PHY"
+ depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
+ default NET_MEDIATEK_SOC
+ help
+ Supports the MediaTek 2.5G Ethernet PHY.
+
config MICREL_PHY
tristate "Micrel PHYs"
depends on PTP_1588_CLOCK_OPTIONAL
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o
obj-$(CONFIG_MARVELL_88Q2XXX_PHY) += marvell-88q2xxx.o
obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o
obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
+obj-$(CONFIG_MEDIATEK_2P5G_PHY) += mediatek-2p5ge.o
obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o
obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o