lantiq: kernel 4.14: update patches and config

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mathias Kresin <dev@kresin.me>

target/linux/lantiq/ase/config-4.14

@@ -3,6 +3,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 CONFIG_CPU_MIPSR1=y
 CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_FIRMWARE_MEMMAP=y

target/linux/lantiq/config-4.14

@@ -5,12 +5,21 @@ CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
 # CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
 CONFIG_ARCH_HAS_RESET_CONTROLLER=y
 # CONFIG_ARCH_HAS_SG_CHAIN is not set
+# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
+# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
 CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
 CONFIG_ARCH_SUPPORTS_UPROBES=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+# CONFIG_ARCH_WANTS_THP_SWAP is not set
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_CEVT_R4K=y
 CONFIG_CLKDEV_LOOKUP=y
@@ -36,18 +45,27 @@ CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DMA_NOOP_OPS is not set
+# CONFIG_DMA_VIRT_OPS is not set
+# CONFIG_DRM_LIB_RANDOM is not set
 CONFIG_DTC=y
 # CONFIG_DT_EASY50712 is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_EXPORTFS=y
 CONFIG_FIXED_PHY=y
+CONFIG_FUTEX_PI=y
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
 CONFIG_GENERIC_IO=y
 CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_IPI=y
 CONFIG_GENERIC_IRQ_SHOW=y
 CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
 CONFIG_GENERIC_SCHED_CLOCK=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
@@ -55,6 +73,7 @@ CONFIG_GPIOLIB=y
 CONFIG_GPIO_MM_LANTIQ=y
 CONFIG_GPIO_STP_XWAY=y
 CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDWARE_WATCHPOINTS=y
 CONFIG_HAS_DMA=y
@@ -71,6 +90,7 @@ CONFIG_HAVE_CBPF_JIT=y
 CONFIG_HAVE_CC_STACKPROTECTOR=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
 CONFIG_HAVE_C_RECORDMCOUNT=y
 CONFIG_HAVE_DEBUG_KMEMLEAK=y
 CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
@@ -104,6 +124,7 @@ CONFIG_HZ_PERIODIC=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_IRQCHIP=y
 CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_MIPS_CPU=y
 CONFIG_IRQ_WORK=y
@@ -114,7 +135,10 @@ CONFIG_LANTIQ_WDT=y
 # CONFIG_LANTIQ_XRX200 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LIBFDT=y
-CONFIG_MDIO_BOARDINFO=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_SYSCON=y
 CONFIG_MIPS=y
 CONFIG_MIPS_ASID_BITS=8
 CONFIG_MIPS_ASID_SHIFT=0
@@ -160,13 +184,20 @@ CONFIG_PCI_DRIVERS_LEGACY=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
+CONFIG_PHY_LANTIQ_RCU_USB2=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_LANTIQ=y
 # CONFIG_PINCTRL_SINGLE is not set
 CONFIG_PINCTRL_XWAY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 CONFIG_PSB6970_PHY=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
 # CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_LANTIQ=y
 CONFIG_RTL8366RB_PHY=y
 CONFIG_RTL8366_SMI=y
 # CONFIG_SCHED_INFO is not set
@@ -194,6 +225,8 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_MIPS16=y
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_THIN_ARCHIVES=y
 CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
 CONFIG_USE_OF=y
 # CONFIG_XRX200_PHY_FW is not set

target/linux/lantiq/falcon/config-4.14

@@ -1,8 +1,10 @@
+# CONFIG_MFD_CORE is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
 CONFIG_PINCTRL_FALCON=y
 # CONFIG_PSB6970_PHY is not set
+# CONFIG_RESET_LANTIQ is not set
 # CONFIG_RTL8366_SMI is not set
 CONFIG_SOC_FALCON=y
 # CONFIG_SOC_TYPE_XWAY is not set

target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch

@@ -41,15 +41,15 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/arch/mips/lantiq/Kconfig
 +++ b/arch/mips/lantiq/Kconfig
-@@ -17,6 +17,7 @@ config SOC_XWAY
+@@ -18,6 +18,7 @@ config SOC_XWAY
  	bool "XWAY"
  	select SOC_TYPE_XWAY
  	select HW_HAS_PCI
 +	select ARCH_SUPPORTS_MSI
+ 	select MFD_SYSCON
+ 	select MFD_CORE
  
- config SOC_FALCON
+@@ -50,6 +51,15 @@ config PCI_LANTIQ
- 	bool "FALCON"
-@@ -47,6 +48,15 @@ config PCI_LANTIQ
  	bool "PCI Support"
  	depends on SOC_XWAY && PCI
  
@@ -67,7 +67,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	depends on SOC_XWAY
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -48,6 +48,8 @@ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o
+@@ -49,6 +49,8 @@ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o
  obj-$(CONFIG_SOC_MT7620)	+= pci-mt7620.o
  obj-$(CONFIG_SOC_RT288X)	+= pci-rt2880.o
  obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
@@ -176,7 +176,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
 @@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev
  
- int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+ int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  {
 +#ifdef CONFIG_PCIE_LANTIQ
 +	if (pci_find_capability(dev, PCI_CAP_ID_EXP))
@@ -4143,7 +4143,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 --- a/arch/mips/pci/pci-legacy.c
 +++ b/arch/mips/pci/pci-legacy.c
-@@ -300,3 +300,30 @@ char *__init pcibios_setup(char *str)
+@@ -309,3 +309,30 @@ char *__init pcibios_setup(char *str)
  		return pcibios_plat_setup(str);
  	return str;
  }
@@ -5494,7 +5494,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	  (transaction layer end-to-end CRC checking).
 --- a/include/linux/pci.h
 +++ b/include/linux/pci.h
-@@ -1250,6 +1250,8 @@ void pci_walk_bus(struct pci_bus *top, i
+@@ -1300,6 +1300,8 @@ void pci_walk_bus(struct pci_bus *top, i
  		  void *userdata);
  int pci_cfg_space_size(struct pci_dev *dev);
  unsigned char pci_bus_max_busnr(struct pci_bus *bus);
@@ -5505,7 +5505,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  					 unsigned long type);
 --- a/include/linux/pci_ids.h
 +++ b/include/linux/pci_ids.h
-@@ -1056,6 +1056,12 @@
+@@ -1061,6 +1061,12 @@
  #define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
  #define PCI_DEVICE_ID_SGI_IOC4		0x100a
  

target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch

@@ -431,7 +431,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  #include <asm/bootinfo.h>
  #include <asm/irq_cpu.h>
-@@ -100,6 +101,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
+@@ -96,6 +97,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
  	ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
  	ltq_icu_w32(im, BIT(offset), isr);
  }
@@ -441,7 +441,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  {
 --- a/arch/mips/mm/cache.c
 +++ b/arch/mips/mm/cache.c
-@@ -63,6 +63,8 @@ void (*_dma_cache_wback)(unsigned long s
+@@ -64,6 +64,8 @@ void (*_dma_cache_wback)(unsigned long s
  void (*_dma_cache_inv)(unsigned long start, unsigned long size);
  
  EXPORT_SYMBOL(_dma_cache_wback_inv);
@@ -452,7 +452,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
 --- a/include/uapi/linux/atm.h
 +++ b/include/uapi/linux/atm.h
-@@ -130,8 +130,14 @@
+@@ -131,8 +131,14 @@
  #define ATM_ABR		4
  #define ATM_ANYCLASS	5		/* compatible with everything */
  
@@ -469,16 +469,15 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	int		max_pcr;	/* maximum PCR in cells per second */
 --- a/net/atm/common.c
 +++ b/net/atm/common.c
-@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
+@@ -62,10 +62,16 @@ static void vcc_remove_socket(struct soc
  	write_unlock_irq(&vcc_sklist_lock);
  }
  
 +struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL;
 +EXPORT_SYMBOL(ifx_atm_alloc_tx);
 +
- static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
+ static bool vcc_tx_ready(struct atm_vcc *vcc, unsigned int size)
  {
- 	struct sk_buff *skb;
  	struct sock *sk = sk_atm(vcc);
  
 +	if (ifx_atm_alloc_tx != NULL)
@@ -489,7 +488,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  			 sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
 --- a/net/atm/proc.c
 +++ b/net/atm/proc.c
-@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
+@@ -155,7 +155,7 @@ static void *vcc_seq_next(struct seq_fil
  static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
  {
  	static const char *const class_name[] = {

target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch

@@ -172,9 +172,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,10 @@
+@@ -1,3 +1,9 @@
--obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+-obj-y := prom.o sysctrl.o clk.o dma.o gptu.o dcdc.o
-+obj-y := prom.o sysctrl.o clk.o reset.o dma.o dcdc.o
++obj-y := prom.o sysctrl.o clk.o dma.o dcdc.o
 +
 +ifdef CONFIG_SOC_AMAZON_SE
 +obj-y += gptu.o
@@ -183,10 +183,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +endif
  
  obj-y += vmmc.o
- 
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/timer.c
-@@ -0,0 +1,845 @@
+@@ -0,0 +1,846 @@
 +#ifndef CONFIG_SOC_AMAZON_SE
 +
 +#include <linux/kernel.h>
@@ -201,6 +200,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#include <linux/errno.h>
 +#include <linux/interrupt.h>
 +#include <linux/sched.h>
++#include <linux/sched/signal.h>
 +
 +#include <asm/irq.h>
 +#include <asm/div64.h>
@@ -880,14 +880,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	int ret;
 +	struct gptu_ioctl_param param;
 +
-+	if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
++	if (!access_ok(VERIFY_READ, (void __user *)arg, sizeof(struct gptu_ioctl_param)))
 +		return -EFAULT;
-+	copy_from_user(&param, (void *) arg, sizeof(param));
++	copy_from_user(&param, (void __user *)arg, sizeof(param));
 +
 +	if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
 +	       || GPTU_SET_COUNTER) && param.timer < 2)
 +	     || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
-+	    && !access_ok(VERIFY_WRITE, arg,
++	    && !access_ok(VERIFY_WRITE, (void __user *)arg,
 +			   sizeof(struct gptu_ioctl_param)))
 +		return -EFAULT;
 +

target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch

@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/mtd/maps/lantiq-flash.c
 +++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -137,7 +137,11 @@ ltq_mtd_probe(struct platform_device *pd
+@@ -131,7 +131,11 @@ ltq_mtd_probe(struct platform_device *pd
  	if (!ltq_mtd->map)
  		return -ENOMEM;
  

target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch

@@ -22,8 +22,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  #include <linux/mtd/mtd.h>
  #include <linux/mtd/partitions.h>
-@@ -198,6 +199,10 @@ static int m25p_probe(struct spi_device
+@@ -243,6 +244,10 @@ static int m25p_probe(struct spi_device
- 	enum read_mode mode = SPI_NOR_NORMAL;
+ 	};
  	char *flash_name;
  	int ret;
 +	const char __maybe_unused	*of_mtd_name = NULL;
@@ -33,7 +33,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	data = dev_get_platdata(&spi->dev);
  
-@@ -227,6 +232,8 @@ static int m25p_probe(struct spi_device
+@@ -281,6 +286,8 @@ static int m25p_probe(struct spi_device
  
  	if (data && data->name)
  		nor->mtd.name = data->name;

target/linux/lantiq/patches-4.14/0023-NET-PHY-add-led-support-for-intel-xway.patch

@@ -24,34 +24,34 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +	/* store the led values if one was passed by the devicetree */
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledch", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCH, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCH, tmp);
 +
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledcl", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCL, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCL, tmp);
 +
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0h", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LED0H, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0H, tmp);
 +
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0l", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LED0L, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0L, tmp);
 +
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1h", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LED1H, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1H, tmp);
 +
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1l", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LED1L, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1L, tmp);
 +
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2h", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3H,  tmp);
 +
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2l", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3L, tmp);
 +
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3h", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3H, tmp);
 +
 +	if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3l", &tmp))
-+		phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp);
++		phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3L, tmp);
 +
 +	return 0;
 +}
@@ -66,8 +66,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  {
  	int err;
 @@ -190,6 +235,7 @@ static int xway_gphy_config_init(struct
- 	phy_write_mmd_indirect(phydev, XWAY_MMD_LED2H, MDIO_MMD_VEND2, ledxh);
+ 	phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
- 	phy_write_mmd_indirect(phydev, XWAY_MMD_LED2L, MDIO_MMD_VEND2, ledxl);
+ 	phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
  
 +	vr9_gphy_of_reg_init(phydev);
  	return 0;

target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch

@@ -1,364 +0,0 @@
-From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 09:26:24 +0200
-Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- firmware/Makefile       |    4 +
- firmware/lantiq/COPYING |  286 +++++++++++++++++++++++++++++++++++++++++++++++
- firmware/lantiq/README  |   45 ++++++++
- 3 files changed, 335 insertions(+)
- create mode 100644 firmware/lantiq/COPYING
- create mode 100644 firmware/lantiq/README
-
---- a/firmware/Makefile
-+++ b/firmware/Makefile
-@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P
- fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
- fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
- fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a14.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a22.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a14.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a22.bin
- fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
- 
- fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
---- /dev/null
-+++ b/firmware/lantiq/COPYING
-@@ -0,0 +1,286 @@
-+All firmware files are copyrighted by Lantiq Deutschland GmbH.
-+The files have been extracted from header files found in Lantiq BSPs.
-+If not stated otherwise all files are licensed under GPL.
-+
-+=======================================================================
-+
-+		    GNU GENERAL PUBLIC LICENSE
-+		       Version 2, June 1991
-+
-+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ Everyone is permitted to copy and distribute verbatim copies
-+ of this license document, but changing it is not allowed.
-+
-+			    Preamble
-+
-+  The licenses for most software are designed to take away your
-+freedom to share and change it.  By contrast, the GNU General Public
-+License is intended to guarantee your freedom to share and change free
-+software--to make sure the software is free for all its users.  This
-+General Public License applies to most of the Free Software
-+Foundation's software and to any other program whose authors commit to
-+using it.  (Some other Free Software Foundation software is covered by
-+the GNU Library General Public License instead.)  You can apply it to
-+your programs, too.
-+
-+  When we speak of free software, we are referring to freedom, not
-+price.  Our General Public Licenses are designed to make sure that you
-+have the freedom to distribute copies of free software (and charge for
-+this service if you wish), that you receive source code or can get it
-+if you want it, that you can change the software or use pieces of it
-+in new free programs; and that you know you can do these things.
-+
-+  To protect your rights, we need to make restrictions that forbid
-+anyone to deny you these rights or to ask you to surrender the rights.
-+These restrictions translate to certain responsibilities for you if you
-+distribute copies of the software, or if you modify it.
-+
-+  For example, if you distribute copies of such a program, whether
-+gratis or for a fee, you must give the recipients all the rights that
-+you have.  You must make sure that they, too, receive or can get the
-+source code.  And you must show them these terms so they know their
-+rights.
-+
-+  We protect your rights with two steps: (1) copyright the software, and
-+(2) offer you this license which gives you legal permission to copy,
-+distribute and/or modify the software.
-+
-+  Also, for each author's protection and ours, we want to make certain
-+that everyone understands that there is no warranty for this free
-+software.  If the software is modified by someone else and passed on, we
-+want its recipients to know that what they have is not the original, so
-+that any problems introduced by others will not reflect on the original
-+authors' reputations.
-+
-+  Finally, any free program is threatened constantly by software
-+patents.  We wish to avoid the danger that redistributors of a free
-+program will individually obtain patent licenses, in effect making the
-+program proprietary.  To prevent this, we have made it clear that any
-+patent must be licensed for everyone's free use or not licensed at all.
-+
-+  The precise terms and conditions for copying, distribution and
-+modification follow.
-+
-+		    GNU GENERAL PUBLIC LICENSE
-+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-+
-+  0. This License applies to any program or other work which contains
-+a notice placed by the copyright holder saying it may be distributed
-+under the terms of this General Public License.  The "Program", below,
-+refers to any such program or work, and a "work based on the Program"
-+means either the Program or any derivative work under copyright law:
-+that is to say, a work containing the Program or a portion of it,
-+either verbatim or with modifications and/or translated into another
-+language.  (Hereinafter, translation is included without limitation in
-+the term "modification".)  Each licensee is addressed as "you".
-+
-+Activities other than copying, distribution and modification are not
-+covered by this License; they are outside its scope.  The act of
-+running the Program is not restricted, and the output from the Program
-+is covered only if its contents constitute a work based on the
-+Program (independent of having been made by running the Program).
-+Whether that is true depends on what the Program does.
-+
-+  1. You may copy and distribute verbatim copies of the Program's
-+source code as you receive it, in any medium, provided that you
-+conspicuously and appropriately publish on each copy an appropriate
-+copyright notice and disclaimer of warranty; keep intact all the
-+notices that refer to this License and to the absence of any warranty;
-+and give any other recipients of the Program a copy of this License
-+along with the Program.
-+
-+You may charge a fee for the physical act of transferring a copy, and
-+you may at your option offer warranty protection in exchange for a fee.
-+
-+  2. You may modify your copy or copies of the Program or any portion
-+of it, thus forming a work based on the Program, and copy and
-+distribute such modifications or work under the terms of Section 1
-+above, provided that you also meet all of these conditions:
-+
-+    a) You must cause the modified files to carry prominent notices
-+    stating that you changed the files and the date of any change.
-+
-+    b) You must cause any work that you distribute or publish, that in
-+    whole or in part contains or is derived from the Program or any
-+    part thereof, to be licensed as a whole at no charge to all third
-+    parties under the terms of this License.
-+
-+    c) If the modified program normally reads commands interactively
-+    when run, you must cause it, when started running for such
-+    interactive use in the most ordinary way, to print or display an
-+    announcement including an appropriate copyright notice and a
-+    notice that there is no warranty (or else, saying that you provide
-+    a warranty) and that users may redistribute the program under
-+    these conditions, and telling the user how to view a copy of this
-+    License.  (Exception: if the Program itself is interactive but
-+    does not normally print such an announcement, your work based on
-+    the Program is not required to print an announcement.)
-+
-+These requirements apply to the modified work as a whole.  If
-+identifiable sections of that work are not derived from the Program,
-+and can be reasonably considered independent and separate works in
-+themselves, then this License, and its terms, do not apply to those
-+sections when you distribute them as separate works.  But when you
-+distribute the same sections as part of a whole which is a work based
-+on the Program, the distribution of the whole must be on the terms of
-+this License, whose permissions for other licensees extend to the
-+entire whole, and thus to each and every part regardless of who wrote it.
-+
-+Thus, it is not the intent of this section to claim rights or contest
-+your rights to work written entirely by you; rather, the intent is to
-+exercise the right to control the distribution of derivative or
-+collective works based on the Program.
-+
-+In addition, mere aggregation of another work not based on the Program
-+with the Program (or with a work based on the Program) on a volume of
-+a storage or distribution medium does not bring the other work under
-+the scope of this License.
-+
-+  3. You may copy and distribute the Program (or a work based on it,
-+under Section 2) in object code or executable form under the terms of
-+Sections 1 and 2 above provided that you also do one of the following:
-+
-+    a) Accompany it with the complete corresponding machine-readable
-+    source code, which must be distributed under the terms of Sections
-+    1 and 2 above on a medium customarily used for software interchange; or,
-+
-+    b) Accompany it with a written offer, valid for at least three
-+    years, to give any third party, for a charge no more than your
-+    cost of physically performing source distribution, a complete
-+    machine-readable copy of the corresponding source code, to be
-+    distributed under the terms of Sections 1 and 2 above on a medium
-+    customarily used for software interchange; or,
-+
-+    c) Accompany it with the information you received as to the offer
-+    to distribute corresponding source code.  (This alternative is
-+    allowed only for noncommercial distribution and only if you
-+    received the program in object code or executable form with such
-+    an offer, in accord with Subsection b above.)
-+
-+The source code for a work means the preferred form of the work for
-+making modifications to it.  For an executable work, complete source
-+code means all the source code for all modules it contains, plus any
-+associated interface definition files, plus the scripts used to
-+control compilation and installation of the executable.  However, as a
-+special exception, the source code distributed need not include
-+anything that is normally distributed (in either source or binary
-+form) with the major components (compiler, kernel, and so on) of the
-+operating system on which the executable runs, unless that component
-+itself accompanies the executable.
-+
-+If distribution of executable or object code is made by offering
-+access to copy from a designated place, then offering equivalent
-+access to copy the source code from the same place counts as
-+distribution of the source code, even though third parties are not
-+compelled to copy the source along with the object code.
-+
-+  4. You may not copy, modify, sublicense, or distribute the Program
-+except as expressly provided under this License.  Any attempt
-+otherwise to copy, modify, sublicense or distribute the Program is
-+void, and will automatically terminate your rights under this License.
-+However, parties who have received copies, or rights, from you under
-+this License will not have their licenses terminated so long as such
-+parties remain in full compliance.
-+
-+  5. You are not required to accept this License, since you have not
-+signed it.  However, nothing else grants you permission to modify or
-+distribute the Program or its derivative works.  These actions are
-+prohibited by law if you do not accept this License.  Therefore, by
-+modifying or distributing the Program (or any work based on the
-+Program), you indicate your acceptance of this License to do so, and
-+all its terms and conditions for copying, distributing or modifying
-+the Program or works based on it.
-+
-+  6. Each time you redistribute the Program (or any work based on the
-+Program), the recipient automatically receives a license from the
-+original licensor to copy, distribute or modify the Program subject to
-+these terms and conditions.  You may not impose any further
-+restrictions on the recipients' exercise of the rights granted herein.
-+You are not responsible for enforcing compliance by third parties to
-+this License.
-+
-+  7. If, as a consequence of a court judgment or allegation of patent
-+infringement or for any other reason (not limited to patent issues),
-+conditions are imposed on you (whether by court order, agreement or
-+otherwise) that contradict the conditions of this License, they do not
-+excuse you from the conditions of this License.  If you cannot
-+distribute so as to satisfy simultaneously your obligations under this
-+License and any other pertinent obligations, then as a consequence you
-+may not distribute the Program at all.  For example, if a patent
-+license would not permit royalty-free redistribution of the Program by
-+all those who receive copies directly or indirectly through you, then
-+the only way you could satisfy both it and this License would be to
-+refrain entirely from distribution of the Program.
-+
-+If any portion of this section is held invalid or unenforceable under
-+any particular circumstance, the balance of the section is intended to
-+apply and the section as a whole is intended to apply in other
-+circumstances.
-+
-+It is not the purpose of this section to induce you to infringe any
-+patents or other property right claims or to contest validity of any
-+such claims; this section has the sole purpose of protecting the
-+integrity of the free software distribution system, which is
-+implemented by public license practices.  Many people have made
-+generous contributions to the wide range of software distributed
-+through that system in reliance on consistent application of that
-+system; it is up to the author/donor to decide if he or she is willing
-+to distribute software through any other system and a licensee cannot
-+impose that choice.
-+
-+This section is intended to make thoroughly clear what is believed to
-+be a consequence of the rest of this License.
-+
-+  8. If the distribution and/or use of the Program is restricted in
-+certain countries either by patents or by copyrighted interfaces, the
-+original copyright holder who places the Program under this License
-+may add an explicit geographical distribution limitation excluding
-+those countries, so that distribution is permitted only in or among
-+countries not thus excluded.  In such case, this License incorporates
-+the limitation as if written in the body of this License.
-+
-+  9. The Free Software Foundation may publish revised and/or new versions
-+of the General Public License from time to time.  Such new versions will
-+be similar in spirit to the present version, but may differ in detail to
-+address new problems or concerns.
-+
-+Each version is given a distinguishing version number.  If the Program
-+specifies a version number of this License which applies to it and "any
-+later version", you have the option of following the terms and conditions
-+either of that version or of any later version published by the Free
-+Software Foundation.  If the Program does not specify a version number of
-+this License, you may choose any version ever published by the Free Software
-+Foundation.
-+
-+  10. If you wish to incorporate parts of the Program into other free
-+programs whose distribution conditions are different, write to the author
-+to ask for permission.  For software which is copyrighted by the Free
-+Software Foundation, write to the Free Software Foundation; we sometimes
-+make exceptions for this.  Our decision will be guided by the two goals
-+of preserving the free status of all derivatives of our free software and
-+of promoting the sharing and reuse of software generally.
-+
-+			    NO WARRANTY
-+
-+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-+REPAIR OR CORRECTION.
-+
-+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-+POSSIBILITY OF SUCH DAMAGES.
-+
-+		     END OF TERMS AND CONDITIONS
---- /dev/null
-+++ b/firmware/lantiq/README
-@@ -0,0 +1,45 @@
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+# (C) Copyright 2007 - 2012
-+# Lantiq Deutschland GmbH
-+#
-+# (C) Copyright 2012
-+# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+#
-+
-+#
-+# How to use
-+#
-+Configure kernel with:
-+CONFIG_FW_LOADER=y
-+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
-+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
-+
-+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
-+of space separated files from list below.
-+
-+#
-+# Firmware files
-+#
-+
-+# GPHY core on Lantiq XWAY VR9 v1.1
-+lantiq/xrx200_phy11g_a14.bin
-+lantiq/xrx200_phy22f_a14.bin
-+
-+# GPHY core on Lantiq XWAY VR9 v1.2
-+lantiq/xrx200_phy11g_a22.bin
-+lantiq/xrx200_phy22f_a22.bin

target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch

@@ -16,7 +16,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 
 --- a/drivers/net/ethernet/Kconfig
 +++ b/drivers/net/ethernet/Kconfig
-@@ -104,7 +104,13 @@ config LANTIQ_ETOP
+@@ -107,7 +107,13 @@ config LANTIQ_ETOP
  	tristate "Lantiq SoC ETOP driver"
  	depends on SOC_TYPE_XWAY
  	---help---
@@ -33,7 +33,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
  source "drivers/net/ethernet/mediatek/Kconfig"
 --- a/drivers/net/ethernet/Makefile
 +++ b/drivers/net/ethernet/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal
+@@ -50,6 +50,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal
  obj-$(CONFIG_JME) += jme.o
  obj-$(CONFIG_KORINA) += korina.o
  obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
@@ -209,7 +209,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 +};
 --- /dev/null
 +++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -0,0 +1,1851 @@
+@@ -0,0 +1,1887 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify it
 + *   under the terms of the GNU General Public License version 2 as published
@@ -240,6 +240,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 +#include <linux/of_net.h>
 +#include <linux/of_mdio.h>
 +#include <linux/of_gpio.h>
++#include <linux/of_platform.h>
 +
 +#include <xway_dma.h>
 +#include <lantiq_soc.h>
@@ -1460,16 +1461,12 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 +static void xrx200_mdio_link(struct net_device *dev)
 +{
 +	struct xrx200_priv *priv = netdev_priv(dev);
-+	bool link = false;
 +	int i;
 +
 +	for (i = 0; i < priv->num_port; i++) {
 +		if (!priv->port[i].phydev)
 +			continue;
 +
-+		if (priv->port[i].phydev->link)
-+			link = true;
-+
 +		if (priv->port[i].link != priv->port[i].phydev->link) {
 +			xrx200_gmac_update(&priv->port[i]);
 +			priv->port[i].link = priv->port[i].phydev->link;
@@ -1478,8 +1475,6 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 +				(priv->port[i].link)?("got"):("lost"));
 +		}
 +	}
-+	if (netif_carrier_ok(dev) && !link)
-+		netif_carrier_off(dev);
 +}
 +
 +static inline int xrx200_mdio_poll(struct mii_bus *bus)
@@ -1525,6 +1520,35 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 +	return ltq_mdio_r32(MDIO_READ);
 +}
 +
++static int xrx200_phy_has_link(struct net_device *dev)
++{
++	struct xrx200_priv *priv = netdev_priv(dev);
++	int i;
++
++	for (i = 0; i < priv->num_port; i++) {
++		if (!priv->port[i].phydev)
++			continue;
++
++		if (priv->port[i].phydev->link)
++			return 1;
++	}
++
++	return 0;
++}
++
++static void xrx200_phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
++{
++	struct net_device *netdev = phydev->attached_dev;
++
++	if (do_carrier)
++		if (up)
++			netif_carrier_on(netdev);
++		else if (!xrx200_phy_has_link(netdev))
++			netif_carrier_off(netdev);
++
++	phydev->adjust_link(netdev);
++}
++
 +static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
 +{
 +	struct xrx200_priv *priv = netdev_priv(dev);
@@ -1557,7 +1581,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 +			| SUPPORTED_TP);
 +	phydev->advertising = phydev->supported;
 +	port->phydev = phydev;
-+	phydev->no_auto_carrier_off = true;
++	phydev->phy_link_change = xrx200_phy_link_change;
 +
 +	phy_attached_info(phydev);
 +
@@ -1880,7 +1904,6 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 +	.ndo_start_xmit		= xrx200_start_xmit,
 +	.ndo_set_mac_address	= eth_mac_addr,
 +	.ndo_validate_addr	= eth_validate_addr,
-+	.ndo_change_mtu		= eth_change_mtu,
 +	.ndo_get_stats		= xrx200_get_stats,
 +	.ndo_tx_timeout		= xrx200_tx_timeout,
 +};
@@ -1937,7 +1960,9 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 +static int xrx200_probe(struct platform_device *pdev)
 +{
 +	struct resource *res[4];
-+	struct device_node *mdio_np, *iface_np;
++	struct device_node *mdio_np, *iface_np, *phy_np;
++	struct of_phandle_iterator it;
++	int err;
 +	int i;
 +
 +	/* load the memory ranges */
@@ -1958,6 +1983,17 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
 +		return -ENOMEM;
 +	}
 +
++	of_for_each_phandle(&it, err, pdev->dev.of_node, "lantiq,phys", NULL, 0) {
++		phy_np = it.node;
++		if (phy_np) {
++			struct platform_device *phy = of_find_device_by_node(phy_np);
++	
++			of_node_put(phy_np);
++			if (!platform_get_drvdata(phy))
++				return -EPROBE_DEFER;
++		}
++	}
++
 +	/* get the clock */
 +	xrx200_hw.clk = clk_get(&pdev->dev, NULL);
 +	if (IS_ERR(xrx200_hw.clk)) {

target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch

@@ -1,53 +0,0 @@
-From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 26/36] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/phy.c |    9 ++++++---
- include/linux/phy.h   |    1 +
- 2 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -1032,7 +1032,8 @@ void phy_state_machine(struct work_struc
- 		/* If the link is down, give up on negotiation for now */
- 		if (!phydev->link) {
- 			phydev->state = PHY_NOLINK;
--			netif_carrier_off(phydev->attached_dev);
-+			if (!phydev->no_auto_carrier_off)
-+				netif_carrier_off(phydev->attached_dev);
- 			phydev->adjust_link(phydev->attached_dev);
- 			break;
- 		}
-@@ -1124,7 +1125,8 @@ void phy_state_machine(struct work_struc
- 			netif_carrier_on(phydev->attached_dev);
- 		} else {
- 			phydev->state = PHY_NOLINK;
--			netif_carrier_off(phydev->attached_dev);
-+			if (!phydev->no_auto_carrier_off)
-+				netif_carrier_off(phydev->attached_dev);
- 		}
- 
- 		phydev->adjust_link(phydev->attached_dev);
-@@ -1136,7 +1138,8 @@ void phy_state_machine(struct work_struc
- 	case PHY_HALTED:
- 		if (phydev->link) {
- 			phydev->link = 0;
--			netif_carrier_off(phydev->attached_dev);
-+			if (!phydev->no_auto_carrier_off)
-+				netif_carrier_off(phydev->attached_dev);
- 			phydev->adjust_link(phydev->attached_dev);
- 			do_suspend = true;
- 		}
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -369,6 +369,7 @@ struct phy_device {
- 	bool is_pseudo_fixed_link;
- 	bool has_fixups;
- 	bool suspended;
-+	bool no_auto_carrier_off;
- 
- 	enum phy_state state;
- 

target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch

@@ -328,10 +328,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	struct ltq_etop_priv *priv = netdev_priv(dev);
 -	int i;
 +	int mii_mode = priv->mii_mode;
-+
-+	clk_enable(priv->clk_ppe);
  
 -	ltq_pmu_enable(PMU_PPE);
++	clk_enable(priv->clk_ppe);
+ 
+-	switch (priv->pldata->mii_mode) {
 +	if (of_machine_is_compatible("lantiq,ar9")) {
 +		ltq_etop_gbit_init(dev);
 +		/* force the etops link to the gbit to MII */
@@ -340,8 +341,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
 +	ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
 +			MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
- 
++
--	switch (priv->pldata->mii_mode) {
 +	switch (mii_mode) {
  	case PHY_INTERFACE_MODE_RMII:
 -		ltq_etop_w32_mask(ETOP_MII_MASK,
@@ -440,19 +440,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  }
  
  static void
-@@ -303,7 +448,10 @@ ltq_etop_get_drvinfo(struct net_device *
+@@ -308,6 +453,39 @@ static const struct ethtool_ops ltq_etop
- static int
- ltq_etop_nway_reset(struct net_device *dev)
- {
--	return phy_start_aneg(dev->phydev);
-+	if (dev->phydev)
-+		return phy_start_aneg(dev->phydev);
-+	else
-+		return 0;
- }
- 
- static const struct ethtool_ops ltq_etop_ethtool_ops = {
-@@ -314,6 +462,39 @@ static const struct ethtool_ops ltq_etop
  };
  
  static int
@@ -492,7 +480,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
  {
  	u32 val = MDIO_REQUEST |
-@@ -321,9 +502,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
+@@ -315,9 +493,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
  		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
  		phy_data;
  
@@ -504,7 +492,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	return 0;
  }
  
-@@ -334,12 +515,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
+@@ -328,12 +506,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
  		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
  		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
  
@@ -521,7 +509,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	return val;
  }
  
-@@ -354,8 +535,18 @@ ltq_etop_mdio_probe(struct net_device *d
+@@ -348,8 +526,18 @@ ltq_etop_mdio_probe(struct net_device *d
  {
  	struct ltq_etop_priv *priv = netdev_priv(dev);
  	struct phy_device *phydev;
@@ -541,7 +529,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	if (!phydev) {
  		netdev_err(dev, "no PHY found\n");
-@@ -363,21 +554,18 @@ ltq_etop_mdio_probe(struct net_device *d
+@@ -357,21 +545,18 @@ ltq_etop_mdio_probe(struct net_device *d
  	}
  
  	phydev = phy_connect(dev, phydev_name(phydev),
@@ -568,7 +556,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	phydev->advertising = phydev->supported;
  	phy_attached_info(phydev);
  
-@@ -398,8 +586,13 @@ ltq_etop_mdio_init(struct net_device *de
+@@ -392,8 +577,13 @@ ltq_etop_mdio_init(struct net_device *de
  	}
  
  	priv->mii_bus->priv = dev;
@@ -584,7 +572,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	priv->mii_bus->name = "ltq_mii";
  	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
  		priv->pdev->name, priv->pdev->id);
-@@ -436,17 +629,19 @@ static int
+@@ -430,17 +620,19 @@ static int
  ltq_etop_open(struct net_device *dev)
  {
  	struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -613,7 +601,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	netif_tx_start_all_queues(dev);
  	return 0;
  }
-@@ -455,18 +650,19 @@ static int
+@@ -449,18 +641,19 @@ static int
  ltq_etop_stop(struct net_device *dev)
  {
  	struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -643,7 +631,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	return 0;
  }
  
-@@ -476,16 +672,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -470,16 +663,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
  	int queue = skb_get_queue_mapping(skb);
  	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
  	struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -665,7 +653,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  		netdev_err(dev, "tx ring full\n");
  		netif_tx_stop_queue(txq);
  		return NETDEV_TX_BUSY;
-@@ -493,7 +689,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -487,7 +680,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
  
  	/* dma needs to start on a 16 byte aligned address */
  	byte_offset = CPHYSADDR(skb->data) % 16;
@@ -674,7 +662,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	netif_trans_update(dev);
  
-@@ -503,11 +699,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -497,11 +690,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
  	wmb();
  	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
  		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
@@ -689,19 +677,19 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  		netif_tx_stop_queue(txq);
  
  	return NETDEV_TX_OK;
-@@ -522,8 +718,10 @@ ltq_etop_change_mtu(struct net_device *d
+@@ -515,8 +708,10 @@ ltq_etop_change_mtu(struct net_device *d
- 		struct ltq_etop_priv *priv = netdev_priv(dev);
+ 
- 		unsigned long flags;
+ 	dev->mtu = new_mtu;
  
 +	int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
 +
  	spin_lock_irqsave(&priv->lock, flags);
--		ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
+-	ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu, LTQ_ETOP_IGPLEN);
-+		ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max,
++	ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max, LTQ_ETOP_IGPLEN);
- 			LTQ_ETOP_IGPLEN);
  	spin_unlock_irqrestore(&priv->lock, flags);
- 	}
+ 
-@@ -592,6 +790,9 @@ ltq_etop_init(struct net_device *dev)
+ 	return 0;
+@@ -584,6 +779,9 @@ ltq_etop_init(struct net_device *dev)
  	if (err)
  		goto err_hw;
  	ltq_etop_change_mtu(dev, 1500);
@@ -711,7 +699,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
  	if (!is_valid_ether_addr(mac.sa_data)) {
-@@ -609,9 +810,10 @@ ltq_etop_init(struct net_device *dev)
+@@ -601,9 +799,10 @@ ltq_etop_init(struct net_device *dev)
  		dev->addr_assign_type = NET_ADDR_RANDOM;
  
  	ltq_etop_set_multicast_list(dev);
@@ -725,7 +713,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	return 0;
  
  err_netdev:
-@@ -631,6 +833,9 @@ ltq_etop_tx_timeout(struct net_device *d
+@@ -623,6 +822,9 @@ ltq_etop_tx_timeout(struct net_device *d
  	err = ltq_etop_hw_init(dev);
  	if (err)
  		goto err_hw;
@@ -735,7 +723,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	netif_trans_update(dev);
  	netif_wake_queue(dev);
  	return;
-@@ -654,14 +859,19 @@ static const struct net_device_ops ltq_e
+@@ -646,14 +848,19 @@ static const struct net_device_ops ltq_e
  	.ndo_tx_timeout = ltq_etop_tx_timeout,
  };
  
@@ -759,7 +747,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  	if (!res) {
-@@ -687,31 +897,62 @@ ltq_etop_probe(struct platform_device *p
+@@ -679,31 +886,62 @@ ltq_etop_probe(struct platform_device *p
  		goto err_out;
  	}
  
@@ -837,7 +825,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	err = register_netdev(dev);
  	if (err)
-@@ -740,31 +981,22 @@ ltq_etop_remove(struct platform_device *
+@@ -732,31 +970,22 @@ ltq_etop_remove(struct platform_device *
  	return 0;
  }
  

target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch

@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  #include "gpiolib.h"
  
-@@ -538,3 +540,73 @@ void of_gpiochip_remove(struct gpio_chip
+@@ -506,3 +508,73 @@ void of_gpiochip_remove(struct gpio_chip
  	gpiochip_remove_pin_ranges(chip);
  	of_node_put(chip->of_node);
  }
@@ -98,7 +98,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#endif
 --- a/include/asm-generic/gpio.h
 +++ b/include/asm-generic/gpio.h
-@@ -126,6 +126,12 @@ static inline int gpio_export(unsigned g
+@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
  	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
  }
  
@@ -113,7 +113,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  {
 --- a/include/linux/gpio/consumer.h
 +++ b/include/linux/gpio/consumer.h
-@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get
+@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
  
  #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
  
@@ -121,7 +121,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
  int gpiod_export_link(struct device *dev, const char *name,
  		      struct gpio_desc *desc);
-@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de
+@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
  
  #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
  
@@ -137,7 +137,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  {
 --- a/drivers/gpio/gpiolib-sysfs.c
 +++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -544,7 +544,7 @@ static struct class gpio_class = {
+@@ -553,7 +553,7 @@ static struct class gpio_class = {
   *
   * Returns zero on success, else an error.
   */
@@ -146,7 +146,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  {
  	struct gpio_chip	*chip;
  	struct gpio_device	*gdev;
-@@ -606,6 +606,8 @@ int gpiod_export(struct gpio_desc *desc,
+@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
  	offset = gpio_chip_hwgpio(desc);
  	if (chip->names && chip->names[offset])
  		ioname = chip->names[offset];
@@ -155,7 +155,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	dev = device_create_with_groups(&gpio_class, &gdev->dev,
  					MKDEV(0, 0), data, gpio_groups,
-@@ -627,6 +629,12 @@ err_unlock:
+@@ -636,6 +638,12 @@ err_unlock:
  	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
  	return status;
  }

target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch

@@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -643,6 +643,16 @@ config I2C_MESON
+@@ -696,6 +696,16 @@ config I2C_MESON
  	  If you say yes to this option, support will be included for the
  	  I2C interface on the Amlogic Meson family of SoCs.
  
@@ -37,7 +37,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	depends on PPC
 --- a/drivers/i2c/busses/Makefile
 +++ b/drivers/i2c/busses/Makefile
-@@ -59,6 +59,7 @@ obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
+@@ -68,6 +68,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C)	+= i2c-imx-l
  obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
  obj-$(CONFIG_I2C_JZ4780)	+= i2c-jz4780.o
  obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o

target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch

@@ -27,14 +27,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #endif /* _LTQ_XWAY_H__ */
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -8,4 +8,7 @@ endif
+@@ -7,3 +7,6 @@ obj-y += timer.o
+ endif
  
  obj-y += vmmc.o
- 
++
 +obj-y += eth_mac.o
 +obj-$(CONFIG_PCI) += ath5k_eep.o
-+
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/ath5k_eep.c
 @@ -0,0 +1,136 @@
@@ -204,7 +203,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +early_param("ethaddr", setup_ethaddr);
 --- a/drivers/net/ethernet/lantiq_etop.c
 +++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -794,7 +794,11 @@ ltq_etop_init(struct net_device *dev)
+@@ -783,7 +783,11 @@ ltq_etop_init(struct net_device *dev)
  	if (err)
  		goto err_hw;
  

target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch

@@ -1,35 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -42,6 +42,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/of_device.h>
- #include <linux/mutex.h>
-+#include <linux/of_gpio.h>
- #include <linux/platform_device.h>
- #include <linux/phy/phy.h>
- #include <linux/platform_data/s3c-hsotg.h>
-@@ -544,6 +545,7 @@ static int dwc2_driver_probe(struct plat
- 	struct dwc2_hsotg *hsotg;
- 	struct resource *res;
- 	int retval;
-+	int gpio_count;	
- 
- 	match = of_match_device(dwc2_of_match_table, &dev->dev);
- 	if (match && match->data) {
-@@ -562,6 +564,16 @@ static int dwc2_driver_probe(struct plat
- 		defparams.dma_desc_fs_enable = 0;
- 	}
- 
-+	gpio_count = of_gpio_count(dev->dev.of_node);
-+	while (gpio_count > 0) {
-+		enum of_gpio_flags flags;
-+		int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags);
-+		if (gpio_request(gpio, "usb"))
-+			continue;
-+		dev_info(&dev->dev, "requested GPIO %d\n", gpio);
-+		gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+	}
-+
- 	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
- 	if (!hsotg)
- 		return -ENOMEM;

target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch

@@ -1,11 +0,0 @@
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -1028,7 +1028,7 @@ static const struct ltq_pin_group xrx200
- 	GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5),
- 	GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6),
- 	GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx),
--	GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx),
-+	GRP_MUX("usif uart_tx", USIF, xrx200_pins_usif_uart_tx),
- 	GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts),
- 	GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts),
- 	GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr),

target/linux/lantiq/patches-4.14/0047-poweroff.patch

@@ -1,23 +0,0 @@
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -301,12 +301,6 @@ static void ltq_machine_halt(void)
- 	unreachable();
- }
- 
--static void ltq_machine_power_off(void)
--{
--	local_irq_disable();
--	unreachable();
--}
--
- static void ltq_usb_init(void)
- {
- 	/* Power for USB cores 1 & 2 */
-@@ -379,7 +373,6 @@ static int __init mips_reboot_setup(void
- 
- 	_machine_restart = ltq_machine_restart;
- 	_machine_halt = ltq_machine_halt;
--	pm_power_off = ltq_machine_power_off;
- 
- 	return 0;
- }

target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch

@@ -1,87 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 19 Jan 2017 12:14:44 +0100
-Subject: [PATCH] MIPS: Lantiq: Fix cascaded IRQ setup
-
-With the IRQ stack changes integrated, the XRX200 devices started
-emitting a constant stream of kernel messages like this:
-
-[  565.415310] Spurious IRQ: CAUSE=0x1100c300
-
-This appears to be caused by IP0 firing for some reason without being
-handled. Fix this by setting up IP2-6 as a proper chained IRQ handler and
-calling do_IRQ for all MIPS CPU interrupts.
-
-Cc: john@phrozen.org
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -271,6 +271,11 @@ static void ltq_hw5_irqdispatch(void)
- DEFINE_HWx_IRQDISPATCH(5)
- #endif
- 
-+static void ltq_hw_irq_handler(struct irq_desc *desc)
-+{
-+	ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2);
-+}
-+
- #ifdef CONFIG_MIPS_MT_SMP
- void __init arch_init_ipiirq(int irq, struct irqaction *action)
- {
-@@ -315,23 +320,19 @@ static struct irqaction irq_call = {
- asmlinkage void plat_irq_dispatch(void)
- {
- 	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
--	unsigned int i;
-+	int irq;
- 
--	if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) {
--		do_IRQ(MIPS_CPU_TIMER_IRQ);
--		goto out;
--	} else {
--		for (i = 0; i < MAX_IM; i++) {
--			if (pending & (CAUSEF_IP2 << i)) {
--				ltq_hw_irqdispatch(i);
--				goto out;
--			}
--		}
-+	if (!pending) {
-+		spurious_interrupt();
-+		return;
- 	}
--	pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
- 
--out:
--	return;
-+	pending >>= CAUSEB_IP;
-+	while (pending) {
-+		irq = fls(pending) - 1;
-+		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-+		pending &= ~BIT(irq);
-+	}
- }
- 
- static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-@@ -356,11 +357,6 @@ static const struct irq_domain_ops irq_d
- 	.map = icu_map,
- };
- 
--static struct irqaction cascade = {
--	.handler = no_action,
--	.name = "cascade",
--};
--
- int __init icu_of_init(struct device_node *node, struct device_node *parent)
- {
- 	struct device_node *eiu_node;
-@@ -392,7 +388,7 @@ int __init icu_of_init(struct device_nod
- 	mips_cpu_irq_init();
- 
- 	for (i = 0; i < MAX_IM; i++)
--		setup_irq(i + 2, &cascade);
-+		irq_set_chained_handler(i + 2, ltq_hw_irq_handler);
- 
- 	if (cpu_has_vint) {
- 		pr_info("Setting up vectored interrupts\n");

target/linux/lantiq/patches-4.14/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch

@@ -0,0 +1,78 @@
+From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 6 Jan 2017 17:55:24 +0100
+Subject: [PATCH 2/2] usb: dwc2:  add support for other Lantiq SoCs
+
+The size of the internal RAM of the DesignWare USB controller changed
+between the different Lantiq SoCs. We have the following sizes:
+
+Amazon + Danube: 8 KByte
+Amazon SE + arx100: 2 KByte
+xrx200 + xrx300: 2.5 KByte
+
+For Danube SoC we do not provide the params and let the driver decide
+to use sane defaults, for the Amazon SE and arx100 we use small fifos
+and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo.
+The auto detection of max_transfer_size and max_packet_count should
+work, so remove it.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++-------
+ 1 file changed, 39 insertions(+), 7 deletions(-)
+
+--- a/drivers/usb/dwc2/params.c
++++ b/drivers/usb/dwc2/params.c
+@@ -83,7 +83,14 @@ static void dwc2_set_rk_params(struct dw
+ 		GAHBCFG_HBSTLEN_SHIFT;
+ }
+ 
+-static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg)
++static void dwc2_set_ltq_danube_params(struct dwc2_hsotg *hsotg)
++{
++	struct dwc2_core_params *p = &hsotg->params;
++
++	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
++}
++
++static void dwc2_set_ltq_ase_params(struct dwc2_hsotg *hsotg)
+ {
+ 	struct dwc2_core_params *p = &hsotg->params;
+ 
+@@ -91,12 +98,20 @@ static void dwc2_set_ltq_params(struct d
+ 	p->host_rx_fifo_size = 288;
+ 	p->host_nperio_tx_fifo_size = 128;
+ 	p->host_perio_tx_fifo_size = 96;
+-	p->max_transfer_size = 65535;
+-	p->max_packet_count = 511;
+ 	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+ 		GAHBCFG_HBSTLEN_SHIFT;
+ }
+ 
++static void dwc2_set_ltq_xrx200_params(struct dwc2_hsotg *hsotg)
++{
++	struct dwc2_core_params *p = &hsotg->params;
++
++	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
++	p->host_rx_fifo_size = 288;
++	p->host_nperio_tx_fifo_size = 128;
++	p->host_perio_tx_fifo_size = 136;
++}
++
+ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
+ {
+ 	struct dwc2_core_params *p = &hsotg->params;
+@@ -140,8 +155,11 @@ const struct of_device_id dwc2_of_match_
+ 	{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
+ 	{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params  },
+ 	{ .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params },
+-	{ .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params },
+-	{ .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params },
++	{ .compatible = "lantiq,danube-usb", .data = &dwc2_set_ltq_danube_params },
++	{ .compatible = "lantiq,ase-usb", .data = &dwc2_set_ltq_ase_params },
++	{ .compatible = "lantiq,arx100-usb", .data = &dwc2_set_ltq_ase_params },
++	{ .compatible = "lantiq,xrx200-usb", .data = &dwc2_set_ltq_xrx200_params },
++	{ .compatible = "lantiq,xrx300-usb", .data = &dwc2_set_ltq_xrx200_params },
+ 	{ .compatible = "snps,dwc2" },
+ 	{ .compatible = "samsung,s3c6400-hsotg" },
+ 	{ .compatible = "amlogic,meson8-usb",

target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch

@@ -0,0 +1,49 @@
+From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 6 Jan 2017 17:40:12 +0100
+Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
+
+This adds code to initialize the USB controller and PHY also on Danube,
+Amazon SE and AR10. This code is based on the Vendor driver from
+different UGW versions and compared to the hardware documentation.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/lantiq/xway/sysctrl.c |  20 +++++++
+ 2 files changed, 110 insertions(+), 30 deletions(-)
+
+
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -246,6 +246,25 @@ static void pmu_disable(struct clk *clk)
+ 		pr_warn("deactivating PMU module failed!");
+ }
+ 
++static void usb_set_clock(void)
++{
++	unsigned int val = ltq_cgu_r32(ifccr);
++
++	if (of_machine_is_compatible("lantiq,ar10") ||
++	    of_machine_is_compatible("lantiq,grx390")) {
++		val &= ~0x03; /* XTAL divided by 3 */
++	} else if (of_machine_is_compatible("lantiq,ar9") ||
++		   of_machine_is_compatible("lantiq,vr9")) {
++		/* TODO: this depends on the XTAL frequency */
++		val |= 0x03; /* XTAL divided by 3 */
++	} else if (of_machine_is_compatible("lantiq,ase")) {
++		val |= 0x20; /* from XTAL */
++	} else if (of_machine_is_compatible("lantiq,danube")) {
++		val |= 0x30; /* 12 MHz, generated from 36 MHz */
++	}
++	ltq_cgu_w32(val, ifccr);
++}
++
+ /* the pci enable helper */
+ static int pci_enable(struct clk *clk)
+ {
+@@ -569,4 +588,5 @@ void __init ltq_soc_init(void)
+ 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+ 		clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
+ 	}
++	usb_set_clock();
+ }

target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch

@@ -1,130 +0,0 @@
-From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 6 Jan 2017 17:55:24 +0100
-Subject: [PATCH 2/2] usb: dwc2:  add support for other Lantiq SoCs
-
-The size of the internal RAM of the DesignWare USB controller changed
-between the different Lantiq SoCs. We have the following sizes:
-
-Amazon + Danube: 8 KByte
-Amazon SE + arx100: 2 KByte
-xrx200 + xrx300: 2.5 KByte
-
-For Danube SoC we do not provide the params and let the driver decide
-to use sane defaults, for the Amazon SE and arx100 we use small fifos
-and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo.
-The auto detection of max_transfer_size and max_packet_count should
-work, so remove it.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++-------
- 1 file changed, 39 insertions(+), 7 deletions(-)
-
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -151,7 +151,38 @@ static const struct dwc2_core_params par
- 	.hibernation			= -1,
- };
- 
--static const struct dwc2_core_params params_ltq = {
-+static const struct dwc2_core_params params_danube = {
-+	.otg_cap			= 2,	/* non-HNP/non-SRP */
-+	.otg_ver			= -1,
-+	.dma_enable			= -1,
-+	.dma_desc_enable		= -1,
-+	.dma_desc_fs_enable		= -1,
-+	.speed				= -1,
-+	.enable_dynamic_fifo		= -1,
-+	.en_multiple_tx_fifo		= -1,
-+	.host_rx_fifo_size		= -1,
-+	.host_nperio_tx_fifo_size	= -1,
-+	.host_perio_tx_fifo_size	= -1,
-+	.max_transfer_size		= -1,
-+	.max_packet_count		= -1,
-+	.host_channels			= -1,
-+	.phy_type			= -1,
-+	.phy_utmi_width			= -1,
-+	.phy_ulpi_ddr			= -1,
-+	.phy_ulpi_ext_vbus		= -1,
-+	.i2c_enable			= -1,
-+	.ulpi_fs_ls			= -1,
-+	.host_support_fs_ls_low_power	= -1,
-+	.host_ls_low_power_phy_clk	= -1,
-+	.ts_dline			= -1,
-+	.reload_ctl			= -1,
-+	.ahbcfg				= -1,
-+	.uframe_sched			= -1,
-+	.external_id_pin_ctl		= -1,
-+	.hibernation			= -1,
-+};
-+
-+static const struct dwc2_core_params params_ase = {
- 	.otg_cap			= 2,	/* non-HNP/non-SRP */
- 	.otg_ver			= -1,
- 	.dma_enable			= -1,
-@@ -163,8 +194,8 @@ static const struct dwc2_core_params par
- 	.host_rx_fifo_size		= 288,	/* 288 DWORDs */
- 	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
- 	.host_perio_tx_fifo_size	= 96,	/* 96 DWORDs */
--	.max_transfer_size		= 65535,
--	.max_packet_count		= 511,
-+	.max_transfer_size		= -1,
-+	.max_packet_count		= -1,
- 	.host_channels			= -1,
- 	.phy_type			= -1,
- 	.phy_utmi_width			= -1,
-@@ -176,8 +207,37 @@ static const struct dwc2_core_params par
- 	.host_ls_low_power_phy_clk	= -1,
- 	.ts_dline			= -1,
- 	.reload_ctl			= -1,
--	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
--					  GAHBCFG_HBSTLEN_SHIFT,
-+	.ahbcfg				= -1,
-+	.uframe_sched			= -1,
-+	.external_id_pin_ctl		= -1,
-+	.hibernation			= -1,
-+};
-+
-+static const struct dwc2_core_params params_xrx200 = {
-+	.otg_cap			= 2,	/* non-HNP/non-SRP */
-+	.otg_ver			= -1,
-+	.dma_enable			= -1,
-+	.dma_desc_enable		= -1,
-+	.speed				= -1,
-+	.enable_dynamic_fifo		= -1,
-+	.en_multiple_tx_fifo		= -1,
-+	.host_rx_fifo_size		= 288,	/* 288 DWORDs */
-+	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
-+	.host_perio_tx_fifo_size	= 136,	/* 136 DWORDs */
-+	.max_transfer_size		= -1,
-+	.max_packet_count		= -1,
-+	.host_channels			= -1,
-+	.phy_type			= -1,
-+	.phy_utmi_width			= -1,
-+	.phy_ulpi_ddr			= -1,
-+	.phy_ulpi_ext_vbus		= -1,
-+	.i2c_enable			= -1,
-+	.ulpi_fs_ls			= -1,
-+	.host_support_fs_ls_low_power	= -1,
-+	.host_ls_low_power_phy_clk	= -1,
-+	.ts_dline			= -1,
-+	.reload_ctl			= -1,
-+	.ahbcfg				= -1,
- 	.uframe_sched			= -1,
- 	.external_id_pin_ctl		= -1,
- 	.hibernation			= -1,
-@@ -515,8 +575,11 @@ static const struct of_device_id dwc2_of
- 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
- 	{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
- 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
--	{ .compatible = "lantiq,arx100-usb", .data = &params_ltq },
--	{ .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
-+	{ .compatible = "lantiq,danube-usb", .data = &params_danube },
-+	{ .compatible = "lantiq,ase-usb", .data = &params_ase },
-+	{ .compatible = "lantiq,arx100-usb", .data = &params_ase },
-+	{ .compatible = "lantiq,xrx200-usb", .data = &params_xrx200 },
-+	{ .compatible = "lantiq,xrx300-usb", .data = &params_xrx200 },
- 	{ .compatible = "snps,dwc2", .data = NULL },
- 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
- 	{ .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },

target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch

@@ -1,202 +0,0 @@
-From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 6 Jan 2017 17:40:12 +0100
-Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
-
-This adds code to initialize the USB controller and PHY also on Danube,
-Amazon SE and AR10. This code is based on the Vendor driver from
-different UGW versions and compared to the hardware documentation.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/lantiq/xway/reset.c   | 120 ++++++++++++++++++++++++++++++----------
- arch/mips/lantiq/xway/sysctrl.c |  20 +++++++
- 2 files changed, 110 insertions(+), 30 deletions(-)
-
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -72,6 +72,8 @@
- #define RCU_USBCFG_HDSEL_BIT	BIT(11)
- #define RCU_USBCFG_HOST_END_BIT	BIT(10)
- #define RCU_USBCFG_SLV_END_BIT	BIT(9)
-+#define RCU_USBCFG_SLV_END_BIT_AR9	BIT(17)
-+
- 
- /* USB reset bits */
- #define RCU_USBRESET		0x0010
-@@ -85,6 +87,8 @@
- 
- #define RCU_CFG1A		0x0038
- #define RCU_CFG1B		0x003C
-+#define  RCU_CFG1_TX_PEE	BIT(0)
-+#define  RCU_CFG1_DIS_THR_SHIFT	15 /* Disconnect Threshold */	
- 
- /* USB PMU devices */
- #define PMU_AHBM		BIT(15)
-@@ -306,38 +310,91 @@ static void ltq_usb_init(void)
- 	/* Power for USB cores 1 & 2 */
- 	ltq_pmu_enable(PMU_AHBM);
- 	ltq_pmu_enable(PMU_USB0);
--	ltq_pmu_enable(PMU_USB1);
- 
--	ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
--	ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
-+	if (of_machine_is_compatible("lantiq,ar10") ||
-+	    of_machine_is_compatible("lantiq,grx390") ||
-+	    of_machine_is_compatible("lantiq,ar9") ||
-+	    of_machine_is_compatible("lantiq,vr9"))
-+		ltq_pmu_enable(PMU_USB1);
-+
-+	if (of_machine_is_compatible("lantiq,vr9") ||
-+	    of_machine_is_compatible("lantiq,ar10")) {
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE |
-+			    7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A);
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE |
-+			    7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B);
-+	}
- 
- 	/* Enable USB PHY power for cores 1 & 2 */
- 	ltq_pmu_enable(PMU_USB0_P);
--	ltq_pmu_enable(PMU_USB1_P);
-+	if (of_machine_is_compatible("lantiq,ar10") ||
-+	    of_machine_is_compatible("lantiq,grx390") ||
-+	    of_machine_is_compatible("lantiq,ar9") ||
-+	    of_machine_is_compatible("lantiq,vr9"))
-+		ltq_pmu_enable(PMU_USB1_P);
-+
-+	if (of_machine_is_compatible("lantiq,ase") ||
-+	    of_machine_is_compatible("lantiq,danube")) {
-+		/* Configure cores to host mode */
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+			RCU_USB1CFG);
-+
-+		/* Select DMA endianness (Host-endian: big-endian) */
-+		ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+			| RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
-+	}
-+
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		/* Configure cores to host mode */
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+			RCU_USB1CFG);
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+			RCU_USB2CFG);
-+
-+		/* Select DMA endianness (Host-endian: big-endian) */
-+		ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
-+			| RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
-+		ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
-+			| RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
-+	}
-+
-+	if (of_machine_is_compatible("lantiq,vr9") ||
-+	    of_machine_is_compatible("lantiq,ar10")) {
-+		/* Configure cores to host mode */
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+			RCU_USB1CFG);
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+			RCU_USB2CFG);
-+
-+		/* Select DMA endianness (Host-endian: big-endian) */
-+		ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+			| RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
-+		ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+			| RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
-+	}
-+
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		/* Hard reset USB state machines */
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
-+			   | USBRESET_BIT | BIT(28), RCU_USBRESET);
-+		udelay(50 * 1000);
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
-+			    & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET);
-+	} else {
-+		/* Hard reset USB state machines */
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
-+		udelay(50 * 1000);
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
-+	}
- 
--	/* Configure cores to host mode */
--	ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
--		RCU_USB1CFG);
--	ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
--		RCU_USB2CFG);
--
--	/* Select DMA endianness (Host-endian: big-endian) */
--	ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
--		| RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
--	ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
--		| RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
--
--	/* Hard reset USB state machines */
--	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
--	udelay(50 * 1000);
--	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
--
--	/* Soft reset USB state machines */
--	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
--		| USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
--	udelay(50 * 1000);
--	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
--		& ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
-+	if (of_machine_is_compatible("lantiq,vr9")) {
-+		/* Soft reset USB state machines */
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-+			| USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
-+		udelay(50 * 1000);
-+		ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-+			& ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
-+	}
- }
- 
- static int __init mips_reboot_setup(void)
-@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void
- 	if (!ltq_rcu_membase)
- 		panic("Failed to remap core memory");
- 
--	if (of_machine_is_compatible("lantiq,ar9") ||
--	    of_machine_is_compatible("lantiq,vr9"))
-+	if (of_machine_is_compatible("lantiq,danube") ||
-+	    of_machine_is_compatible("lantiq,ase") ||
-+	    of_machine_is_compatible("lantiq,ar9") ||
-+	    of_machine_is_compatible("lantiq,vr9") ||
-+	    of_machine_is_compatible("lantiq,ar10"))
- 		ltq_usb_init();
- 
- 	if (of_machine_is_compatible("lantiq,vr9"))
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk)
- 		pr_warn("deactivating PMU module failed!");
- }
- 
-+static void usb_set_clock(void)
-+{
-+	unsigned int val = ltq_cgu_r32(ifccr);
-+
-+	if (of_machine_is_compatible("lantiq,ar10") ||
-+	    of_machine_is_compatible("lantiq,grx390")) {
-+		val &= ~0x03; /* XTAL divided by 3 */
-+	} else if (of_machine_is_compatible("lantiq,ar9") ||
-+		   of_machine_is_compatible("lantiq,vr9")) {
-+		/* TODO: this depends on the XTAL frequency */
-+		val |= 0x03; /* XTAL divided by 3 */
-+	} else if (of_machine_is_compatible("lantiq,ase")) {
-+		val |= 0x20; /* from XTAL */
-+	} else if (of_machine_is_compatible("lantiq,danube")) {
-+		val |= 0x30; /* 12 MHz, generated from 36 MHz */
-+	}
-+	ltq_cgu_w32(val, ifccr);
-+}
-+
- /* the pci enable helper */
- static int pci_enable(struct clk *clk)
- {
-@@ -608,4 +627,5 @@ void __init ltq_soc_init(void)
- 
- 	if (of_machine_is_compatible("lantiq,vr9"))
- 		xbar_fpi_burst_disable();
-+	usb_set_clock();
- }

target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch

@@ -1,28 +0,0 @@
-From ba6e1e39969fa5435127a632757e2906caca7730 Mon Sep 17 00:00:00 2001
-From: kbuild test robot <fengguang.wu@intel.com>
-Date: Mon, 20 Feb 2017 01:33:10 +0800
-Subject: spi: lantiq-ssc: fix platform_no_drv_owner.cocci warnings
-
-drivers/spi/spi-lantiq-ssc.c:973:3-8: No need to set .owner here. The core will do it.
-
- Remove .owner field if calls are used which set it automatically
-
-Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
-
-Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-lantiq-ssc.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/spi/spi-lantiq-ssc.c
-+++ b/drivers/spi/spi-lantiq-ssc.c
-@@ -970,7 +970,6 @@ static struct platform_driver lantiq_ssc
- 	.remove = lantiq_ssc_remove,
- 	.driver = {
- 		.name = "spi-lantiq-ssc",
--		.owner = THIS_MODULE,
- 		.of_match_table = lantiq_ssc_match,
- 	},
- };

target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch

@@ -1,723 +0,0 @@
-From 1aa83e0a2821cd7f4e8f3ddb367859f52e468bf1 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 27 Feb 2017 23:21:25 +0100
-Subject: spi: lantiq-ssc: add LTQ_ prefix to defines
-
-The blackfin architecture has a SPI_STAT define which conflicts with
-the define from the spi-lantiq-ssc driver in compile test mode. Fix
-this by adding a prefix in front of every define.
-
-Reported-by: kbuild test robot <fengguang.wu@intel.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-lantiq-ssc.c | 437 ++++++++++++++++++++++---------------------
- 1 file changed, 222 insertions(+), 215 deletions(-)
-
---- a/drivers/spi/spi-lantiq-ssc.c
-+++ b/drivers/spi/spi-lantiq-ssc.c
-@@ -26,136 +26,140 @@
- #include <lantiq_soc.h>
- #endif
- 
--#define SPI_RX_IRQ_NAME		"spi_rx"
--#define SPI_TX_IRQ_NAME		"spi_tx"
--#define SPI_ERR_IRQ_NAME	"spi_err"
--#define SPI_FRM_IRQ_NAME	"spi_frm"
--
--#define SPI_CLC			0x00
--#define SPI_PISEL		0x04
--#define SPI_ID			0x08
--#define SPI_CON			0x10
--#define SPI_STAT		0x14
--#define SPI_WHBSTATE		0x18
--#define SPI_TB			0x20
--#define SPI_RB			0x24
--#define SPI_RXFCON		0x30
--#define SPI_TXFCON		0x34
--#define SPI_FSTAT		0x38
--#define SPI_BRT			0x40
--#define SPI_BRSTAT		0x44
--#define SPI_SFCON		0x60
--#define SPI_SFSTAT		0x64
--#define SPI_GPOCON		0x70
--#define SPI_GPOSTAT		0x74
--#define SPI_FPGO		0x78
--#define SPI_RXREQ		0x80
--#define SPI_RXCNT		0x84
--#define SPI_DMACON		0xec
--#define SPI_IRNEN		0xf4
--#define SPI_IRNICR		0xf8
--#define SPI_IRNCR		0xfc
--
--#define SPI_CLC_SMC_S		16	/* Clock divider for sleep mode */
--#define SPI_CLC_SMC_M		(0xFF << SPI_CLC_SMC_S)
--#define SPI_CLC_RMC_S		8	/* Clock divider for normal run mode */
--#define SPI_CLC_RMC_M		(0xFF << SPI_CLC_RMC_S)
--#define SPI_CLC_DISS		BIT(1)	/* Disable status bit */
--#define SPI_CLC_DISR		BIT(0)	/* Disable request bit */
--
--#define SPI_ID_TXFS_S		24	/* Implemented TX FIFO size */
--#define SPI_ID_TXFS_M		(0x3F << SPI_ID_TXFS_S)
--#define SPI_ID_RXFS_S		16	/* Implemented RX FIFO size */
--#define SPI_ID_RXFS_M		(0x3F << SPI_ID_RXFS_S)
--#define SPI_ID_MOD_S		8	/* Module ID */
--#define SPI_ID_MOD_M		(0xff << SPI_ID_MOD_S)
--#define SPI_ID_CFG_S		5	/* DMA interface support */
--#define SPI_ID_CFG_M		(1 << SPI_ID_CFG_S)
--#define SPI_ID_REV_M		0x1F	/* Hardware revision number */
--
--#define SPI_CON_BM_S		16	/* Data width selection */
--#define SPI_CON_BM_M		(0x1F << SPI_CON_BM_S)
--#define SPI_CON_EM		BIT(24)	/* Echo mode */
--#define SPI_CON_IDLE		BIT(23)	/* Idle bit value */
--#define SPI_CON_ENBV		BIT(22)	/* Enable byte valid control */
--#define SPI_CON_RUEN		BIT(12)	/* Receive underflow error enable */
--#define SPI_CON_TUEN		BIT(11)	/* Transmit underflow error enable */
--#define SPI_CON_AEN		BIT(10)	/* Abort error enable */
--#define SPI_CON_REN		BIT(9)	/* Receive overflow error enable */
--#define SPI_CON_TEN		BIT(8)	/* Transmit overflow error enable */
--#define SPI_CON_LB		BIT(7)	/* Loopback control */
--#define SPI_CON_PO		BIT(6)	/* Clock polarity control */
--#define SPI_CON_PH		BIT(5)	/* Clock phase control */
--#define SPI_CON_HB		BIT(4)	/* Heading control */
--#define SPI_CON_RXOFF		BIT(1)	/* Switch receiver off */
--#define SPI_CON_TXOFF		BIT(0)	/* Switch transmitter off */
--
--#define SPI_STAT_RXBV_S		28
--#define SPI_STAT_RXBV_M		(0x7 << SPI_STAT_RXBV_S)
--#define SPI_STAT_BSY		BIT(13)	/* Busy flag */
--#define SPI_STAT_RUE		BIT(12)	/* Receive underflow error flag */
--#define SPI_STAT_TUE		BIT(11)	/* Transmit underflow error flag */
--#define SPI_STAT_AE		BIT(10)	/* Abort error flag */
--#define SPI_STAT_RE		BIT(9)	/* Receive error flag */
--#define SPI_STAT_TE		BIT(8)	/* Transmit error flag */
--#define SPI_STAT_ME		BIT(7)	/* Mode error flag */
--#define SPI_STAT_MS		BIT(1)	/* Master/slave select bit */
--#define SPI_STAT_EN		BIT(0)	/* Enable bit */
--#define SPI_STAT_ERRORS		(SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \
--				 SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE)
--
--#define SPI_WHBSTATE_SETTUE	BIT(15)	/* Set transmit underflow error flag */
--#define SPI_WHBSTATE_SETAE	BIT(14)	/* Set abort error flag */
--#define SPI_WHBSTATE_SETRE	BIT(13)	/* Set receive error flag */
--#define SPI_WHBSTATE_SETTE	BIT(12)	/* Set transmit error flag */
--#define SPI_WHBSTATE_CLRTUE	BIT(11)	/* Clear transmit underflow error flag */
--#define SPI_WHBSTATE_CLRAE	BIT(10)	/* Clear abort error flag */
--#define SPI_WHBSTATE_CLRRE	BIT(9)	/* Clear receive error flag */
--#define SPI_WHBSTATE_CLRTE	BIT(8)	/* Clear transmit error flag */
--#define SPI_WHBSTATE_SETME	BIT(7)	/* Set mode error flag */
--#define SPI_WHBSTATE_CLRME	BIT(6)	/* Clear mode error flag */
--#define SPI_WHBSTATE_SETRUE	BIT(5)	/* Set receive underflow error flag */
--#define SPI_WHBSTATE_CLRRUE	BIT(4)	/* Clear receive underflow error flag */
--#define SPI_WHBSTATE_SETMS	BIT(3)	/* Set master select bit */
--#define SPI_WHBSTATE_CLRMS	BIT(2)	/* Clear master select bit */
--#define SPI_WHBSTATE_SETEN	BIT(1)	/* Set enable bit (operational mode) */
--#define SPI_WHBSTATE_CLREN	BIT(0)	/* Clear enable bit (config mode */
--#define SPI_WHBSTATE_CLR_ERRORS	(SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \
--				 SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \
--				 SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE)
--
--#define SPI_RXFCON_RXFITL_S	8	/* FIFO interrupt trigger level */
--#define SPI_RXFCON_RXFITL_M	(0x3F << SPI_RXFCON_RXFITL_S)
--#define SPI_RXFCON_RXFLU	BIT(1)	/* FIFO flush */
--#define SPI_RXFCON_RXFEN	BIT(0)	/* FIFO enable */
--
--#define SPI_TXFCON_TXFITL_S	8	/* FIFO interrupt trigger level */
--#define SPI_TXFCON_TXFITL_M	(0x3F << SPI_TXFCON_TXFITL_S)
--#define SPI_TXFCON_TXFLU	BIT(1)	/* FIFO flush */
--#define SPI_TXFCON_TXFEN	BIT(0)	/* FIFO enable */
--
--#define SPI_FSTAT_RXFFL_S	0
--#define SPI_FSTAT_RXFFL_M	(0x3f << SPI_FSTAT_RXFFL_S)
--#define SPI_FSTAT_TXFFL_S	8
--#define SPI_FSTAT_TXFFL_M	(0x3f << SPI_FSTAT_TXFFL_S)
--
--#define SPI_GPOCON_ISCSBN_S	8
--#define SPI_GPOCON_INVOUTN_S	0
--
--#define SPI_FGPO_SETOUTN_S	8
--#define SPI_FGPO_CLROUTN_S	0
--
--#define SPI_RXREQ_RXCNT_M	0xFFFF	/* Receive count value */
--#define SPI_RXCNT_TODO_M	0xFFFF	/* Recevie to-do value */
--
--#define SPI_IRNEN_TFI		BIT(4)	/* TX finished interrupt */
--#define SPI_IRNEN_F		BIT(3)	/* Frame end interrupt request */
--#define SPI_IRNEN_E		BIT(2)	/* Error end interrupt request */
--#define SPI_IRNEN_T_XWAY	BIT(1)	/* Transmit end interrupt request */
--#define SPI_IRNEN_R_XWAY	BIT(0)	/* Receive end interrupt request */
--#define SPI_IRNEN_R_XRX		BIT(1)	/* Transmit end interrupt request */
--#define SPI_IRNEN_T_XRX		BIT(0)	/* Receive end interrupt request */
--#define SPI_IRNEN_ALL		0x1F
-+#define LTQ_SPI_RX_IRQ_NAME	"spi_rx"
-+#define LTQ_SPI_TX_IRQ_NAME	"spi_tx"
-+#define LTQ_SPI_ERR_IRQ_NAME	"spi_err"
-+#define LTQ_SPI_FRM_IRQ_NAME	"spi_frm"
-+
-+#define LTQ_SPI_CLC		0x00
-+#define LTQ_SPI_PISEL		0x04
-+#define LTQ_SPI_ID		0x08
-+#define LTQ_SPI_CON		0x10
-+#define LTQ_SPI_STAT		0x14
-+#define LTQ_SPI_WHBSTATE	0x18
-+#define LTQ_SPI_TB		0x20
-+#define LTQ_SPI_RB		0x24
-+#define LTQ_SPI_RXFCON		0x30
-+#define LTQ_SPI_TXFCON		0x34
-+#define LTQ_SPI_FSTAT		0x38
-+#define LTQ_SPI_BRT		0x40
-+#define LTQ_SPI_BRSTAT		0x44
-+#define LTQ_SPI_SFCON		0x60
-+#define LTQ_SPI_SFSTAT		0x64
-+#define LTQ_SPI_GPOCON		0x70
-+#define LTQ_SPI_GPOSTAT		0x74
-+#define LTQ_SPI_FPGO		0x78
-+#define LTQ_SPI_RXREQ		0x80
-+#define LTQ_SPI_RXCNT		0x84
-+#define LTQ_SPI_DMACON		0xec
-+#define LTQ_SPI_IRNEN		0xf4
-+#define LTQ_SPI_IRNICR		0xf8
-+#define LTQ_SPI_IRNCR		0xfc
-+
-+#define LTQ_SPI_CLC_SMC_S	16	/* Clock divider for sleep mode */
-+#define LTQ_SPI_CLC_SMC_M	(0xFF << LTQ_SPI_CLC_SMC_S)
-+#define LTQ_SPI_CLC_RMC_S	8	/* Clock divider for normal run mode */
-+#define LTQ_SPI_CLC_RMC_M	(0xFF << LTQ_SPI_CLC_RMC_S)
-+#define LTQ_SPI_CLC_DISS	BIT(1)	/* Disable status bit */
-+#define LTQ_SPI_CLC_DISR	BIT(0)	/* Disable request bit */
-+
-+#define LTQ_SPI_ID_TXFS_S	24	/* Implemented TX FIFO size */
-+#define LTQ_SPI_ID_TXFS_M	(0x3F << LTQ_SPI_ID_TXFS_S)
-+#define LTQ_SPI_ID_RXFS_S	16	/* Implemented RX FIFO size */
-+#define LTQ_SPI_ID_RXFS_M	(0x3F << LTQ_SPI_ID_RXFS_S)
-+#define LTQ_SPI_ID_MOD_S	8	/* Module ID */
-+#define LTQ_SPI_ID_MOD_M	(0xff << LTQ_SPI_ID_MOD_S)
-+#define LTQ_SPI_ID_CFG_S	5	/* DMA interface support */
-+#define LTQ_SPI_ID_CFG_M	(1 << LTQ_SPI_ID_CFG_S)
-+#define LTQ_SPI_ID_REV_M	0x1F	/* Hardware revision number */
-+
-+#define LTQ_SPI_CON_BM_S	16	/* Data width selection */
-+#define LTQ_SPI_CON_BM_M	(0x1F << LTQ_SPI_CON_BM_S)
-+#define LTQ_SPI_CON_EM		BIT(24)	/* Echo mode */
-+#define LTQ_SPI_CON_IDLE	BIT(23)	/* Idle bit value */
-+#define LTQ_SPI_CON_ENBV	BIT(22)	/* Enable byte valid control */
-+#define LTQ_SPI_CON_RUEN	BIT(12)	/* Receive underflow error enable */
-+#define LTQ_SPI_CON_TUEN	BIT(11)	/* Transmit underflow error enable */
-+#define LTQ_SPI_CON_AEN		BIT(10)	/* Abort error enable */
-+#define LTQ_SPI_CON_REN		BIT(9)	/* Receive overflow error enable */
-+#define LTQ_SPI_CON_TEN		BIT(8)	/* Transmit overflow error enable */
-+#define LTQ_SPI_CON_LB		BIT(7)	/* Loopback control */
-+#define LTQ_SPI_CON_PO		BIT(6)	/* Clock polarity control */
-+#define LTQ_SPI_CON_PH		BIT(5)	/* Clock phase control */
-+#define LTQ_SPI_CON_HB		BIT(4)	/* Heading control */
-+#define LTQ_SPI_CON_RXOFF	BIT(1)	/* Switch receiver off */
-+#define LTQ_SPI_CON_TXOFF	BIT(0)	/* Switch transmitter off */
-+
-+#define LTQ_SPI_STAT_RXBV_S	28
-+#define LTQ_SPI_STAT_RXBV_M	(0x7 << LTQ_SPI_STAT_RXBV_S)
-+#define LTQ_SPI_STAT_BSY	BIT(13)	/* Busy flag */
-+#define LTQ_SPI_STAT_RUE	BIT(12)	/* Receive underflow error flag */
-+#define LTQ_SPI_STAT_TUE	BIT(11)	/* Transmit underflow error flag */
-+#define LTQ_SPI_STAT_AE		BIT(10)	/* Abort error flag */
-+#define LTQ_SPI_STAT_RE		BIT(9)	/* Receive error flag */
-+#define LTQ_SPI_STAT_TE		BIT(8)	/* Transmit error flag */
-+#define LTQ_SPI_STAT_ME		BIT(7)	/* Mode error flag */
-+#define LTQ_SPI_STAT_MS		BIT(1)	/* Master/slave select bit */
-+#define LTQ_SPI_STAT_EN		BIT(0)	/* Enable bit */
-+#define LTQ_SPI_STAT_ERRORS	(LTQ_SPI_STAT_ME | LTQ_SPI_STAT_TE | \
-+				 LTQ_SPI_STAT_RE | LTQ_SPI_STAT_AE | \
-+				 LTQ_SPI_STAT_TUE | LTQ_SPI_STAT_RUE)
-+
-+#define LTQ_SPI_WHBSTATE_SETTUE	BIT(15)	/* Set transmit underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETAE	BIT(14)	/* Set abort error flag */
-+#define LTQ_SPI_WHBSTATE_SETRE	BIT(13)	/* Set receive error flag */
-+#define LTQ_SPI_WHBSTATE_SETTE	BIT(12)	/* Set transmit error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTUE	BIT(11)	/* Clear transmit underflow error flag */
-+#define LTQ_SPI_WHBSTATE_CLRAE	BIT(10)	/* Clear abort error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRE	BIT(9)	/* Clear receive error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTE	BIT(8)	/* Clear transmit error flag */
-+#define LTQ_SPI_WHBSTATE_SETME	BIT(7)	/* Set mode error flag */
-+#define LTQ_SPI_WHBSTATE_CLRME	BIT(6)	/* Clear mode error flag */
-+#define LTQ_SPI_WHBSTATE_SETRUE	BIT(5)	/* Set receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRUE	BIT(4)	/* Clear receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETMS	BIT(3)	/* Set master select bit */
-+#define LTQ_SPI_WHBSTATE_CLRMS	BIT(2)	/* Clear master select bit */
-+#define LTQ_SPI_WHBSTATE_SETEN	BIT(1)	/* Set enable bit (operational mode) */
-+#define LTQ_SPI_WHBSTATE_CLREN	BIT(0)	/* Clear enable bit (config mode */
-+#define LTQ_SPI_WHBSTATE_CLR_ERRORS	(LTQ_SPI_WHBSTATE_CLRRUE | \
-+					 LTQ_SPI_WHBSTATE_CLRME | \
-+					 LTQ_SPI_WHBSTATE_CLRTE | \
-+					 LTQ_SPI_WHBSTATE_CLRRE | \
-+					 LTQ_SPI_WHBSTATE_CLRAE | \
-+					 LTQ_SPI_WHBSTATE_CLRTUE)
-+
-+#define LTQ_SPI_RXFCON_RXFITL_S	8	/* FIFO interrupt trigger level */
-+#define LTQ_SPI_RXFCON_RXFITL_M	(0x3F << LTQ_SPI_RXFCON_RXFITL_S)
-+#define LTQ_SPI_RXFCON_RXFLU	BIT(1)	/* FIFO flush */
-+#define LTQ_SPI_RXFCON_RXFEN	BIT(0)	/* FIFO enable */
-+
-+#define LTQ_SPI_TXFCON_TXFITL_S	8	/* FIFO interrupt trigger level */
-+#define LTQ_SPI_TXFCON_TXFITL_M	(0x3F << LTQ_SPI_TXFCON_TXFITL_S)
-+#define LTQ_SPI_TXFCON_TXFLU	BIT(1)	/* FIFO flush */
-+#define LTQ_SPI_TXFCON_TXFEN	BIT(0)	/* FIFO enable */
-+
-+#define LTQ_SPI_FSTAT_RXFFL_S	0
-+#define LTQ_SPI_FSTAT_RXFFL_M	(0x3f << LTQ_SPI_FSTAT_RXFFL_S)
-+#define LTQ_SPI_FSTAT_TXFFL_S	8
-+#define LTQ_SPI_FSTAT_TXFFL_M	(0x3f << LTQ_SPI_FSTAT_TXFFL_S)
-+
-+#define LTQ_SPI_GPOCON_ISCSBN_S	8
-+#define LTQ_SPI_GPOCON_INVOUTN_S	0
-+
-+#define LTQ_SPI_FGPO_SETOUTN_S	8
-+#define LTQ_SPI_FGPO_CLROUTN_S	0
-+
-+#define LTQ_SPI_RXREQ_RXCNT_M	0xFFFF	/* Receive count value */
-+#define LTQ_SPI_RXCNT_TODO_M	0xFFFF	/* Recevie to-do value */
-+
-+#define LTQ_SPI_IRNEN_TFI	BIT(4)	/* TX finished interrupt */
-+#define LTQ_SPI_IRNEN_F		BIT(3)	/* Frame end interrupt request */
-+#define LTQ_SPI_IRNEN_E		BIT(2)	/* Error end interrupt request */
-+#define LTQ_SPI_IRNEN_T_XWAY	BIT(1)	/* Transmit end interrupt request */
-+#define LTQ_SPI_IRNEN_R_XWAY	BIT(0)	/* Receive end interrupt request */
-+#define LTQ_SPI_IRNEN_R_XRX	BIT(1)	/* Transmit end interrupt request */
-+#define LTQ_SPI_IRNEN_T_XRX	BIT(0)	/* Receive end interrupt request */
-+#define LTQ_SPI_IRNEN_ALL	0x1F
- 
- struct lantiq_ssc_hwcfg {
- 	unsigned int irnen_r;
-@@ -208,16 +212,16 @@ static void lantiq_ssc_maskl(const struc
- 
- static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi)
- {
--	u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
-+	u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT);
- 
--	return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
-+	return (fstat & LTQ_SPI_FSTAT_TXFFL_M) >> LTQ_SPI_FSTAT_TXFFL_S;
- }
- 
- static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi)
- {
--	u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
-+	u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT);
- 
--	return fstat & SPI_FSTAT_RXFFL_M;
-+	return fstat & LTQ_SPI_FSTAT_RXFFL_M;
- }
- 
- static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi)
-@@ -227,38 +231,38 @@ static unsigned int tx_fifo_free(const s
- 
- static void rx_fifo_reset(const struct lantiq_ssc_spi *spi)
- {
--	u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S;
-+	u32 val = spi->rx_fifo_size << LTQ_SPI_RXFCON_RXFITL_S;
- 
--	val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
--	lantiq_ssc_writel(spi, val, SPI_RXFCON);
-+	val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
-+	lantiq_ssc_writel(spi, val, LTQ_SPI_RXFCON);
- }
- 
- static void tx_fifo_reset(const struct lantiq_ssc_spi *spi)
- {
--	u32 val = 1 << SPI_TXFCON_TXFITL_S;
-+	u32 val = 1 << LTQ_SPI_TXFCON_TXFITL_S;
- 
--	val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
--	lantiq_ssc_writel(spi, val, SPI_TXFCON);
-+	val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
-+	lantiq_ssc_writel(spi, val, LTQ_SPI_TXFCON);
- }
- 
- static void rx_fifo_flush(const struct lantiq_ssc_spi *spi)
- {
--	lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
-+	lantiq_ssc_maskl(spi, 0, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
- }
- 
- static void tx_fifo_flush(const struct lantiq_ssc_spi *spi)
- {
--	lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
-+	lantiq_ssc_maskl(spi, 0, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
- }
- 
- static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi)
- {
--	lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
-+	lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
- }
- 
- static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi)
- {
--	lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
-+	lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
- }
- 
- static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi,
-@@ -287,7 +291,7 @@ static void hw_setup_speed_hz(const stru
- 	dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
- 		spi_clk, max_speed_hz, brt);
- 
--	lantiq_ssc_writel(spi, brt, SPI_BRT);
-+	lantiq_ssc_writel(spi, brt, LTQ_SPI_BRT);
- }
- 
- static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi,
-@@ -296,9 +300,9 @@ static void hw_setup_bits_per_word(const
- 	u32 bm;
- 
- 	/* CON.BM value = bits_per_word - 1 */
--	bm = (bits_per_word - 1) << SPI_CON_BM_S;
-+	bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_S;
- 
--	lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
-+	lantiq_ssc_maskl(spi, LTQ_SPI_CON_BM_M, bm, LTQ_SPI_CON);
- }
- 
- static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi,
-@@ -315,28 +319,28 @@ static void hw_setup_clock_mode(const st
- 	 *  3    1    1      1      0
- 	 */
- 	if (mode & SPI_CPHA)
--		con_clr |= SPI_CON_PH;
-+		con_clr |= LTQ_SPI_CON_PH;
- 	else
--		con_set |= SPI_CON_PH;
-+		con_set |= LTQ_SPI_CON_PH;
- 
- 	if (mode & SPI_CPOL)
--		con_set |= SPI_CON_PO | SPI_CON_IDLE;
-+		con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
- 	else
--		con_clr |= SPI_CON_PO | SPI_CON_IDLE;
-+		con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
- 
- 	/* Set heading control */
- 	if (mode & SPI_LSB_FIRST)
--		con_clr |= SPI_CON_HB;
-+		con_clr |= LTQ_SPI_CON_HB;
- 	else
--		con_set |= SPI_CON_HB;
-+		con_set |= LTQ_SPI_CON_HB;
- 
- 	/* Set loopback mode */
- 	if (mode & SPI_LOOP)
--		con_set |= SPI_CON_LB;
-+		con_set |= LTQ_SPI_CON_LB;
- 	else
--		con_clr |= SPI_CON_LB;
-+		con_clr |= LTQ_SPI_CON_LB;
- 
--	lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON);
-+	lantiq_ssc_maskl(spi, con_clr, con_set, LTQ_SPI_CON);
- }
- 
- static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi)
-@@ -347,37 +351,39 @@ static void lantiq_ssc_hw_init(const str
- 	 * Set clock divider for run mode to 1 to
- 	 * run at same frequency as FPI bus
- 	 */
--	lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
-+	lantiq_ssc_writel(spi, 1 << LTQ_SPI_CLC_RMC_S, LTQ_SPI_CLC);
- 
- 	/* Put controller into config mode */
- 	hw_enter_config_mode(spi);
- 
- 	/* Clear error flags */
--	lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
-+	lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
- 
- 	/* Enable error checking, disable TX/RX */
--	lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
--		SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
-+	lantiq_ssc_writel(spi, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
-+		LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF |
-+		LTQ_SPI_CON_RXOFF, LTQ_SPI_CON);
- 
- 	/* Setup default SPI mode */
- 	hw_setup_bits_per_word(spi, spi->bits_per_word);
- 	hw_setup_clock_mode(spi, SPI_MODE_0);
- 
- 	/* Enable master mode and clear error flags */
--	lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
--			       SPI_WHBSTATE);
-+	lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETMS |
-+			       LTQ_SPI_WHBSTATE_CLR_ERRORS,
-+			       LTQ_SPI_WHBSTATE);
- 
- 	/* Reset GPIO/CS registers */
--	lantiq_ssc_writel(spi, 0, SPI_GPOCON);
--	lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO);
-+	lantiq_ssc_writel(spi, 0, LTQ_SPI_GPOCON);
-+	lantiq_ssc_writel(spi, 0xFF00, LTQ_SPI_FPGO);
- 
- 	/* Enable and flush FIFOs */
- 	rx_fifo_reset(spi);
- 	tx_fifo_reset(spi);
- 
- 	/* Enable interrupts */
--	lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
--			  SPI_IRNEN);
-+	lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r |
-+			  LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
- }
- 
- static int lantiq_ssc_setup(struct spi_device *spidev)
-@@ -400,13 +406,13 @@ static int lantiq_ssc_setup(struct spi_d
- 	}
- 
- 	/* set GPO pin to CS mode */
--	gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S);
-+	gpocon = 1 << ((cs - spi->base_cs) + LTQ_SPI_GPOCON_ISCSBN_S);
- 
- 	/* invert GPO pin */
- 	if (spidev->mode & SPI_CS_HIGH)
- 		gpocon |= 1 << (cs - spi->base_cs);
- 
--	lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON);
-+	lantiq_ssc_maskl(spi, 0, gpocon, LTQ_SPI_GPOCON);
- 
- 	return 0;
- }
-@@ -442,18 +448,18 @@ static void hw_setup_transfer(struct lan
- 	}
- 
- 	/* Configure transmitter and receiver */
--	con = lantiq_ssc_readl(spi, SPI_CON);
-+	con = lantiq_ssc_readl(spi, LTQ_SPI_CON);
- 	if (t->tx_buf)
--		con &= ~SPI_CON_TXOFF;
-+		con &= ~LTQ_SPI_CON_TXOFF;
- 	else
--		con |= SPI_CON_TXOFF;
-+		con |= LTQ_SPI_CON_TXOFF;
- 
- 	if (t->rx_buf)
--		con &= ~SPI_CON_RXOFF;
-+		con &= ~LTQ_SPI_CON_RXOFF;
- 	else
--		con |= SPI_CON_RXOFF;
-+		con |= LTQ_SPI_CON_RXOFF;
- 
--	lantiq_ssc_writel(spi, con, SPI_CON);
-+	lantiq_ssc_writel(spi, con, LTQ_SPI_CON);
- }
- 
- static int lantiq_ssc_unprepare_message(struct spi_master *master,
-@@ -464,7 +470,8 @@ static int lantiq_ssc_unprepare_message(
- 	flush_workqueue(spi->wq);
- 
- 	/* Disable transmitter and receiver while idle */
--	lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
-+	lantiq_ssc_maskl(spi, 0, LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF,
-+			 LTQ_SPI_CON);
- 
- 	return 0;
- }
-@@ -503,7 +510,7 @@ static void tx_fifo_write(struct lantiq_
- 			break;
- 		}
- 
--		lantiq_ssc_writel(spi, data, SPI_TB);
-+		lantiq_ssc_writel(spi, data, LTQ_SPI_TB);
- 		tx_free--;
- 	}
- }
-@@ -517,7 +524,7 @@ static void rx_fifo_read_full_duplex(str
- 	unsigned int rx_fill = rx_fifo_level(spi);
- 
- 	while (rx_fill) {
--		data = lantiq_ssc_readl(spi, SPI_RB);
-+		data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
- 
- 		switch (spi->bits_per_word) {
- 		case 2 ... 8:
-@@ -563,9 +570,9 @@ static void rx_fifo_read_half_duplex(str
- 	 */
- 	while (rx_fill) {
- 		if (spi->rx_todo < 4)  {
--			rxbv = (lantiq_ssc_readl(spi, SPI_STAT) &
--				SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
--			data = lantiq_ssc_readl(spi, SPI_RB);
-+			rxbv = (lantiq_ssc_readl(spi, LTQ_SPI_STAT) &
-+				LTQ_SPI_STAT_RXBV_M) >> LTQ_SPI_STAT_RXBV_S;
-+			data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
- 
- 			shift = (rxbv - 1) * 8;
- 			rx8 = spi->rx;
-@@ -578,7 +585,7 @@ static void rx_fifo_read_half_duplex(str
- 				spi->rx++;
- 			}
- 		} else {
--			data = lantiq_ssc_readl(spi, SPI_RB);
-+			data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
- 			rx32 = (u32 *) spi->rx;
- 
- 			*rx32++ = data;
-@@ -603,7 +610,7 @@ static void rx_request(struct lantiq_ssc
- 	if (rxreq > rxreq_max)
- 		rxreq = rxreq_max;
- 
--	lantiq_ssc_writel(spi, rxreq, SPI_RXREQ);
-+	lantiq_ssc_writel(spi, rxreq, LTQ_SPI_RXREQ);
- }
- 
- static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
-@@ -642,26 +649,26 @@ completed:
- static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
- {
- 	struct lantiq_ssc_spi *spi = data;
--	u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
-+	u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT);
- 
--	if (!(stat & SPI_STAT_ERRORS))
-+	if (!(stat & LTQ_SPI_STAT_ERRORS))
- 		return IRQ_NONE;
- 
--	if (stat & SPI_STAT_RUE)
-+	if (stat & LTQ_SPI_STAT_RUE)
- 		dev_err(spi->dev, "receive underflow error\n");
--	if (stat & SPI_STAT_TUE)
-+	if (stat & LTQ_SPI_STAT_TUE)
- 		dev_err(spi->dev, "transmit underflow error\n");
--	if (stat & SPI_STAT_AE)
-+	if (stat & LTQ_SPI_STAT_AE)
- 		dev_err(spi->dev, "abort error\n");
--	if (stat & SPI_STAT_RE)
-+	if (stat & LTQ_SPI_STAT_RE)
- 		dev_err(spi->dev, "receive overflow error\n");
--	if (stat & SPI_STAT_TE)
-+	if (stat & LTQ_SPI_STAT_TE)
- 		dev_err(spi->dev, "transmit overflow error\n");
--	if (stat & SPI_STAT_ME)
-+	if (stat & LTQ_SPI_STAT_ME)
- 		dev_err(spi->dev, "mode error\n");
- 
- 	/* Clear error flags */
--	lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
-+	lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
- 
- 	/* set bad status so it can be retried */
- 	if (spi->master->cur_msg)
-@@ -721,9 +728,9 @@ static void lantiq_ssc_bussy_work(struct
- 
- 	end = jiffies + msecs_to_jiffies(timeout);
- 	do {
--		u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
-+		u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT);
- 
--		if (!(stat & SPI_STAT_BSY)) {
-+		if (!(stat & LTQ_SPI_STAT_BSY)) {
- 			spi_finalize_current_transfer(spi->master);
- 			return;
- 		}
-@@ -755,9 +762,9 @@ static void lantiq_ssc_set_cs(struct spi
- 	if (!!(spidev->mode & SPI_CS_HIGH) == enable)
- 		fgpo = (1 << (cs - spi->base_cs));
- 	else
--		fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S));
-+		fgpo = (1 << (cs - spi->base_cs + LTQ_SPI_FGPO_SETOUTN_S));
- 
--	lantiq_ssc_writel(spi, fgpo, SPI_FPGO);
-+	lantiq_ssc_writel(spi, fgpo, LTQ_SPI_FPGO);
- }
- 
- static int lantiq_ssc_transfer_one(struct spi_master *master,
-@@ -772,13 +779,13 @@ static int lantiq_ssc_transfer_one(struc
- }
- 
- static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = {
--	.irnen_r = SPI_IRNEN_R_XWAY,
--	.irnen_t = SPI_IRNEN_T_XWAY,
-+	.irnen_r = LTQ_SPI_IRNEN_R_XWAY,
-+	.irnen_t = LTQ_SPI_IRNEN_T_XWAY,
- };
- 
- static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = {
--	.irnen_r = SPI_IRNEN_R_XRX,
--	.irnen_t = SPI_IRNEN_T_XRX,
-+	.irnen_r = LTQ_SPI_IRNEN_R_XRX,
-+	.irnen_t = LTQ_SPI_IRNEN_T_XRX,
- };
- 
- static const struct of_device_id lantiq_ssc_match[] = {
-@@ -814,21 +821,21 @@ static int lantiq_ssc_probe(struct platf
- 		return -ENXIO;
- 	}
- 
--	rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
-+	rx_irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME);
- 	if (rx_irq < 0) {
--		dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
-+		dev_err(dev, "failed to get %s\n", LTQ_SPI_RX_IRQ_NAME);
- 		return -ENXIO;
- 	}
- 
--	tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
-+	tx_irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME);
- 	if (tx_irq < 0) {
--		dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
-+		dev_err(dev, "failed to get %s\n", LTQ_SPI_TX_IRQ_NAME);
- 		return -ENXIO;
- 	}
- 
--	err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
-+	err_irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME);
- 	if (err_irq < 0) {
--		dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
-+		dev_err(dev, "failed to get %s\n", LTQ_SPI_ERR_IRQ_NAME);
- 		return -ENXIO;
- 	}
- 
-@@ -849,17 +856,17 @@ static int lantiq_ssc_probe(struct platf
- 	}
- 
- 	err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt,
--			       0, SPI_RX_IRQ_NAME, spi);
-+			       0, LTQ_SPI_RX_IRQ_NAME, spi);
- 	if (err)
- 		goto err_master_put;
- 
- 	err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt,
--			       0, SPI_TX_IRQ_NAME, spi);
-+			       0, LTQ_SPI_TX_IRQ_NAME, spi);
- 	if (err)
- 		goto err_master_put;
- 
- 	err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt,
--			       0, SPI_ERR_IRQ_NAME, spi);
-+			       0, LTQ_SPI_ERR_IRQ_NAME, spi);
- 	if (err)
- 		goto err_master_put;
- 
-@@ -916,11 +923,11 @@ static int lantiq_ssc_probe(struct platf
- 	}
- 	INIT_WORK(&spi->work, lantiq_ssc_bussy_work);
- 
--	id = lantiq_ssc_readl(spi, SPI_ID);
--	spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
--	spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
--	supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S;
--	revision = id & SPI_ID_REV_M;
-+	id = lantiq_ssc_readl(spi, LTQ_SPI_ID);
-+	spi->tx_fifo_size = (id & LTQ_SPI_ID_TXFS_M) >> LTQ_SPI_ID_TXFS_S;
-+	spi->rx_fifo_size = (id & LTQ_SPI_ID_RXFS_M) >> LTQ_SPI_ID_RXFS_S;
-+	supports_dma = (id & LTQ_SPI_ID_CFG_M) >> LTQ_SPI_ID_CFG_S;
-+	revision = id & LTQ_SPI_ID_REV_M;
- 
- 	lantiq_ssc_hw_init(spi);
- 
-@@ -952,8 +959,8 @@ static int lantiq_ssc_remove(struct plat
- {
- 	struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev);
- 
--	lantiq_ssc_writel(spi, 0, SPI_IRNEN);
--	lantiq_ssc_writel(spi, 0, SPI_CLC);
-+	lantiq_ssc_writel(spi, 0, LTQ_SPI_IRNEN);
-+	lantiq_ssc_writel(spi, 0, LTQ_SPI_CLC);
- 	rx_fifo_flush(spi);
- 	tx_fifo_flush(spi);
- 	hw_enter_config_mode(spi);

target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -2320,6 +2320,12 @@ config MIPS_VPE_LOADER
+@@ -2323,6 +2323,12 @@ config MIPS_VPE_LOADER
  	  Includes a loader for loading an elf relocatable object
  	  onto another VPE and running it.
  
@@ -142,7 +142,7 @@
  {
 --- a/arch/mips/lantiq/prom.c
 +++ b/arch/mips/lantiq/prom.c
-@@ -31,10 +31,14 @@ EXPORT_SYMBOL_GPL(ebu_lock);
+@@ -37,10 +37,14 @@ unsigned long physical_memsize = 0L;
   */
  static struct ltq_soc_info soc_info;
  
@@ -159,7 +159,7 @@
  {
 --- a/arch/mips/include/asm/mipsmtregs.h
 +++ b/arch/mips/include/asm/mipsmtregs.h
-@@ -31,6 +31,9 @@
+@@ -32,6 +32,9 @@
  #define read_c0_vpeconf1()		__read_32bit_c0_register($1, 3)
  #define write_c0_vpeconf1(val)		__write_32bit_c0_register($1, 3, val)
  
@@ -169,7 +169,7 @@
  #define read_c0_tcstatus()		__read_32bit_c0_register($2, 1)
  #define write_c0_tcstatus(val)		__write_32bit_c0_register($2, 1, val)
  
-@@ -376,6 +379,8 @@ do {									\
+@@ -377,6 +380,8 @@ do {									\
  #define write_vpe_c0_vpeconf0(val)	mttc0(1, 2, val)
  #define read_vpe_c0_vpeconf1()		mftc0(1, 3)
  #define write_vpe_c0_vpeconf1(val)	mttc0(1, 3, val)

target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch

@@ -71,9 +71,9 @@
 +	};
 +	const char **type;
  
- 	if (of_machine_is_compatible("lantiq,falcon") &&
+ 	ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL);
- 			(ltq_boot_select() != BS_FLASH)) {
+ 	if (!ltq_mtd)
-@@ -126,75 +162,89 @@ ltq_mtd_probe(struct platform_device *pd
+@@ -120,75 +156,89 @@ ltq_mtd_probe(struct platform_device *pd
  
  	platform_set_drvdata(pdev, ltq_mtd);
  
@@ -141,17 +141,7 @@
 -				    GFP_KERNEL);
 -	if (!ltq_mtd->map)
 -		return -ENOMEM;
-+	if (devices_found == 1) {
+-
-+		ltq_mtd->cmtd = ltq_mtd->mtd[0];
-+	} else if (devices_found > 1) {
-+		/*
-+		 * We detected multiple devices. Concatenate them together.
-+		 */
-+		ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev));
-+		if (ltq_mtd->cmtd == NULL)
-+			err = -ENXIO;
-+	}
- 
 -	if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
 -		ltq_mtd->map->phys = NO_XIP;
 -	else
@@ -176,8 +166,17 @@
 -	if (!ltq_mtd->mtd) {
 -		dev_err(&pdev->dev, "probing failed\n");
 -		return -ENXIO;
--	}
++	if (devices_found == 1) {
--
++		ltq_mtd->cmtd = ltq_mtd->mtd[0];
++	} else if (devices_found > 1) {
++		/*
++		 * We detected multiple devices. Concatenate them together.
++		 */
++		ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev));
++		if (ltq_mtd->cmtd == NULL)
++			err = -ENXIO;
+ 	}
+ 
 -	ltq_mtd->mtd->dev.parent = &pdev->dev;
 -	mtd_set_of_node(ltq_mtd->mtd, pdev->dev.of_node);
 -

target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch

@@ -1,152 +0,0 @@
-From 58078a30038b578c26c532545448fe3746648390 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 29 Dec 2016 21:02:57 +0100
-Subject: [PATCH] MIPS: lantiq: lock DMA register accesses for SMP
-
-The DMA controller channel and port configuration is changed by
-selecting the port or channel in one register and then update the
-configuration in other registers. This has to be done in an atomic
-operation. Previously only the local interrupts were deactivated which
-works for single CPU systems. If the system supports SMP a better
-locking is needed, use spinlocks instead.
-On more recent SoCs (at least xrx200 and later) there are two memory
-regions to change the configuration, there we could use one area for
-each CPU and do not have to synchronize between the CPUs and more.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/lantiq/xway/dma.c | 38 ++++++++++++++++++++------------------
- 1 file changed, 20 insertions(+), 18 deletions(-)
-
---- a/arch/mips/lantiq/xway/dma.c
-+++ b/arch/mips/lantiq/xway/dma.c
-@@ -20,6 +20,7 @@
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/module.h>
-+#include <linux/spinlock.h>
- #include <linux/clk.h>
- #include <linux/err.h>
- 
-@@ -59,16 +60,17 @@
- 						ltq_dma_membase + (z))
- 
- static void __iomem *ltq_dma_membase;
-+static DEFINE_SPINLOCK(ltq_dma_lock);
- 
- void
- ltq_dma_enable_irq(struct ltq_dma_channel *ch)
- {
- 	unsigned long flags;
- 
--	local_irq_save(flags);
-+	spin_lock_irqsave(&ltq_dma_lock, flags);
- 	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- 	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
--	local_irq_restore(flags);
-+	spin_unlock_irqrestore(&ltq_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_enable_irq);
- 
-@@ -77,10 +79,10 @@ ltq_dma_disable_irq(struct ltq_dma_chann
- {
- 	unsigned long flags;
- 
--	local_irq_save(flags);
-+	spin_lock_irqsave(&ltq_dma_lock, flags);
- 	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- 	ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN);
--	local_irq_restore(flags);
-+	spin_unlock_irqrestore(&ltq_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_disable_irq);
- 
-@@ -89,10 +91,10 @@ ltq_dma_ack_irq(struct ltq_dma_channel *
- {
- 	unsigned long flags;
- 
--	local_irq_save(flags);
-+	spin_lock_irqsave(&ltq_dma_lock, flags);
- 	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- 	ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS);
--	local_irq_restore(flags);
-+	spin_unlock_irqrestore(&ltq_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_ack_irq);
- 
-@@ -101,11 +103,11 @@ ltq_dma_open(struct ltq_dma_channel *ch)
- {
- 	unsigned long flag;
- 
--	local_irq_save(flag);
-+	spin_lock_irqsave(&ltq_dma_lock, flag);
- 	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- 	ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL);
--	ltq_dma_enable_irq(ch);
--	local_irq_restore(flag);
-+	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
-+	spin_unlock_irqrestore(&ltq_dma_lock, flag);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_open);
- 
-@@ -114,11 +116,11 @@ ltq_dma_close(struct ltq_dma_channel *ch
- {
- 	unsigned long flag;
- 
--	local_irq_save(flag);
-+	spin_lock_irqsave(&ltq_dma_lock, flag);
- 	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- 	ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
--	ltq_dma_disable_irq(ch);
--	local_irq_restore(flag);
-+	ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN);
-+	spin_unlock_irqrestore(&ltq_dma_lock, flag);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_close);
- 
-@@ -133,7 +135,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch
- 				&ch->phys, GFP_ATOMIC);
- 	memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE);
- 
--	local_irq_save(flags);
-+	spin_lock_irqsave(&ltq_dma_lock, flags);
- 	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- 	ltq_dma_w32(ch->phys, LTQ_DMA_CDBA);
- 	ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN);
-@@ -142,7 +144,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch
- 	ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL);
- 	while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST)
- 		;
--	local_irq_restore(flags);
-+	spin_unlock_irqrestore(&ltq_dma_lock, flags);
- }
- 
- void
-@@ -152,11 +154,11 @@ ltq_dma_alloc_tx(struct ltq_dma_channel
- 
- 	ltq_dma_alloc(ch);
- 
--	local_irq_save(flags);
-+	spin_lock_irqsave(&ltq_dma_lock, flags);
- 	ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
- 	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
- 	ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL);
--	local_irq_restore(flags);
-+	spin_unlock_irqrestore(&ltq_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx);
- 
-@@ -167,11 +169,11 @@ ltq_dma_alloc_rx(struct ltq_dma_channel
- 
- 	ltq_dma_alloc(ch);
- 
--	local_irq_save(flags);
-+	spin_lock_irqsave(&ltq_dma_lock, flags);
- 	ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
- 	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
- 	ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL);
--	local_irq_restore(flags);
-+	spin_unlock_irqrestore(&ltq_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx);
- 

target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/sysctrl.c
 +++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -442,6 +442,20 @@ static void clkdev_add_clkout(void)
+@@ -424,6 +424,20 @@ static void clkdev_add_clkout(void)
  	}
  }
  
@@ -21,9 +21,9 @@
  /* bring up all register ranges that we need for basic system control */
  void __init ltq_soc_init(void)
  {
-@@ -628,4 +642,6 @@ void __init ltq_soc_init(void)
+@@ -589,4 +603,6 @@ void __init ltq_soc_init(void)
- 	if (of_machine_is_compatible("lantiq,vr9"))
+ 		clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
- 		xbar_fpi_burst_disable();
+ 	}
  	usb_set_clock();
 +
 +	set_phy_clock_source(np_cgu);

target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch

@@ -1,184 +0,0 @@
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -109,6 +109,7 @@ obj-$(CONFIG_SENSORS_LTC4222)	+= ltc4222
- obj-$(CONFIG_SENSORS_LTC4245)	+= ltc4245.o
- obj-$(CONFIG_SENSORS_LTC4260)	+= ltc4260.o
- obj-$(CONFIG_SENSORS_LTC4261)	+= ltc4261.o
-+obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o
- obj-$(CONFIG_SENSORS_MAX1111)	+= max1111.o
- obj-$(CONFIG_SENSORS_MAX16065)	+= max16065.o
- obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -780,6 +780,14 @@ config SENSORS_LTC4261
- 	  This driver can also be built as a module. If so, the module will
- 	  be called ltc4261.
- 
-+config SENSORS_LTQ_CPUTEMP
-+	bool "Lantiq CPU temperature sensor"
-+	depends on LANTIQ
-+	default n
-+	help
-+	  If you say yes here you get support for the temperature
-+	  sensor inside your CPU.
-+
- config SENSORS_MAX1111
- 	tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
- 	depends on SPI_MASTER
---- /dev/null
-+++ b/drivers/hwmon/ltq-cputemp.c
-@@ -0,0 +1,154 @@
-+/* Lantiq CPU Temperatur sensor driver for xrx200
-+ *
-+ * Copyright (C) 2016 Florian Eckert <feckert@tdt.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version
-+ *
-+ * This program is distributed in the hope that it will be useful
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, see <http://www.gnu.org/licenses/>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/of_device.h>
-+#include <linux/hwmon.h>
-+#include <linux/hwmon-sysfs.h>
-+
-+#include <lantiq_soc.h>
-+
-+/* gphy1 configuration register contains cpu temperature */
-+#define CGU_GPHY1_CR   0x0040
-+#define CGU_TEMP_PD    BIT(19)
-+
-+static void ltq_cputemp_enable(void)
-+{
-+	ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR);
-+
-+	/* wait a short moment to let the SoC get the first temperatur value */
-+	mdelay(100);
-+}
-+
-+static void ltq_cputemp_disable(void)
-+{
-+	ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) & ~CGU_TEMP_PD, CGU_GPHY1_CR);
-+}
-+
-+static int ltq_cputemp_read(void)
-+{
-+	int value;
-+
-+	/* get the temperature including one decimal place */
-+	value = (ltq_cgu_r32(CGU_GPHY1_CR) >> 9) & 0x01FF;
-+	value = (value << 2 ) + value;
-+
-+	/* range -38 to +154 °C, register value zero is -38.0 °C */
-+	value -= 380;
-+
-+	return value;
-+}
-+
-+static ssize_t show_cputemp(struct device *dev,
-+			struct device_attribute *attr, char *buf)
-+{
-+	int value;
-+
-+	value = ltq_cputemp_read();
-+	/* scale temp to millidegree */
-+	value = value * 100;
-+
-+	return sprintf(buf, "%d\n", value);
-+}
-+
-+static DEVICE_ATTR(temp1_input, S_IRUGO, show_cputemp, NULL);
-+
-+static struct attribute *ltq_cputemp_attrs[] = {
-+	&dev_attr_temp1_input.attr,
-+	NULL
-+};
-+
-+ATTRIBUTE_GROUPS(ltq_cputemp);
-+
-+static int ltq_cputemp_probe(struct platform_device *pdev)
-+{
-+	int value = 0;
-+	int ret;
-+	struct device *hwmon_dev;
-+
-+	/* available on vr9 v1.2 SoCs only */
-+	if (ltq_soc_type() != SOC_TYPE_VR9_2)
-+		return -ENODEV;
-+
-+	hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
-+							"CPU0",
-+							NULL,
-+							ltq_cputemp_groups);
-+
-+	if (IS_ERR(hwmon_dev)) {
-+		dev_err(&pdev->dev, "Failed to register as hwmon device");
-+		ret = PTR_ERR(hwmon_dev);
-+		goto error_hwmon;
-+	}
-+
-+	ltq_cputemp_enable();
-+	value = ltq_cputemp_read();
-+	dev_info(&pdev->dev, "Current CPU die temperature: %d.%d °C", value / 10, value % 10);
-+
-+	return 0;
-+
-+error_hwmon:
-+	return ret;
-+}
-+
-+static int ltq_cputemp_release(struct platform_device *pdev)
-+{
-+	hwmon_device_unregister(&pdev->dev);
-+	ltq_cputemp_disable();
-+	return 0;
-+}
-+
-+const struct of_device_id ltq_cputemp_match[] = {
-+	{ .compatible = "lantiq,cputemp" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_cputemp_match);
-+
-+static struct platform_driver ltq_cputemp_driver = {
-+	.probe = ltq_cputemp_probe,
-+	.remove = ltq_cputemp_release,
-+	.driver = {
-+		.name = "ltq-cputemp",
-+		.owner = THIS_MODULE,
-+		.of_match_table = ltq_cputemp_match,
-+	},
-+};
-+
-+int __init init_ltq_cputemp(void)
-+{
-+	int ret;
-+
-+	ret = platform_driver_register(&ltq_cputemp_driver);
-+	return ret;
-+}
-+
-+void clean_ltq_cputemp(void)
-+{
-+	platform_driver_unregister(&ltq_cputemp_driver);
-+	return;
-+}
-+
-+module_init(init_ltq_cputemp);
-+module_exit(clean_ltq_cputemp);
-+
-+MODULE_AUTHOR("Florian Eckert <feckert@tdt.de>");
-+
-+MODULE_DESCRIPTION("Lantiq Temperature Sensor");
-+MODULE_LICENSE("GPL");

target/linux/lantiq/xrx200/config-4.14

@@ -6,6 +6,7 @@ CONFIG_CPU_MIPSR2_IRQ_EI=y
 CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_RMAP=y
 CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_DEFLATE=y
@@ -13,6 +14,8 @@ CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_NULL2=y
+CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
 CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_HWMON=y
 CONFIG_ICPLUS_PHY=y
@@ -57,10 +60,14 @@ CONFIG_PCI=y
 CONFIG_PCIE_LANTIQ=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LANTIQ=y
-CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_SUPPLY=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RCU_NEED_SEGCBLIST=y
 CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RTL8306_PHY=y
@@ -75,6 +82,7 @@ CONFIG_SYNC_R4K=y
 CONFIG_SYS_SUPPORTS_SCHED_SMT=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
 CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_ADVANCED_COMPR=y
 CONFIG_UBIFS_FS_LZO=y
@@ -83,7 +91,6 @@ CONFIG_USB=y
 CONFIG_USB_COMMON=y
 # CONFIG_USB_EHCI_HCD is not set
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
 CONFIG_XPS=y
 CONFIG_XRX200_PHY_FW=y
 CONFIG_ZLIB_DEFLATE=y

target/linux/lantiq/xway/config-4.14

@@ -2,6 +2,7 @@ CONFIG_ADM6996_PHY=y
 CONFIG_AR8216_PHY=y
 CONFIG_BLK_MQ_PCI=y
 CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 CONFIG_FIRMWARE_IN_KERNEL=y
@@ -31,6 +32,8 @@ CONFIG_PCI=y
 # CONFIG_PCIE_LANTIQ is not set
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LANTIQ=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RTL8306_PHY=y
 CONFIG_RTL8366S_PHY=y
 CONFIG_RTL8367B_PHY=y
@@ -43,6 +46,5 @@ CONFIG_USB=y
 CONFIG_USB_COMMON=y
 # CONFIG_USB_EHCI_HCD is not set
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y

target/linux/lantiq/xway_legacy/config-4.14

@@ -2,6 +2,7 @@ CONFIG_ADM6996_PHY=y
 CONFIG_AR8216_PHY=y
 CONFIG_BLK_MQ_PCI=y
 CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 CONFIG_FIRMWARE_IN_KERNEL=y
@@ -24,6 +25,8 @@ CONFIG_PCI=y
 # CONFIG_PCIE_LANTIQ is not set
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LANTIQ=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RTL8306_PHY=y
 CONFIG_RTL8366S_PHY=y
 CONFIG_RTL8367B_PHY=y
@@ -32,6 +35,5 @@ CONFIG_USB=y
 CONFIG_USB_COMMON=y
 # CONFIG_USB_EHCI_HCD is not set
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y