diff --git a/target/linux/lantiq/ase/config-4.14 b/target/linux/lantiq/ase/config-4.14 index b802509022b..cf27a148b78 100644 --- a/target/linux/lantiq/ase/config-4.14 +++ b/target/linux/lantiq/ase/config-4.14 @@ -3,6 +3,7 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set CONFIG_CPU_MIPSR1=y CONFIG_CRC16=y +CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_DEFLATE=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_FIRMWARE_MEMMAP=y diff --git a/target/linux/lantiq/config-4.14 b/target/linux/lantiq/config-4.14 index a98509e5d66..172ce909929 100644 --- a/target/linux/lantiq/config-4.14 +++ b/target/linux/lantiq/config-4.14 @@ -5,12 +5,21 @@ CONFIG_ARCH_HAS_ELF_RANDOMIZE=y # CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set CONFIG_ARCH_HAS_RESET_CONTROLLER=y # CONFIG_ARCH_HAS_SG_CHAIN is not set +# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set +# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_MMAP_RND_BITS_MAX=15 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 +# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set +# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +# CONFIG_ARCH_WANTS_THP_SWAP is not set CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_CEVT_R4K=y CONFIG_CLKDEV_LOOKUP=y @@ -36,18 +45,27 @@ CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y +# CONFIG_DMA_NOOP_OPS is not set +# CONFIG_DMA_VIRT_OPS is not set +# CONFIG_DRM_LIB_RANDOM is not set CONFIG_DTC=y # CONFIG_DT_EASY50712 is not set CONFIG_EARLY_PRINTK=y CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_EXPORTFS=y CONFIG_FIXED_PHY=y +CONFIG_FUTEX_PI=y CONFIG_GENERIC_ATOMIC64=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_GENERIC_IO=y CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_IPI=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y CONFIG_GENERIC_SCHED_CLOCK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_TIME_VSYSCALL=y @@ -55,6 +73,7 @@ CONFIG_GPIOLIB=y CONFIG_GPIO_MM_LANTIQ=y CONFIG_GPIO_STP_XWAY=y CONFIG_GPIO_SYSFS=y +# CONFIG_GRO_CELLS is not set CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HAS_DMA=y @@ -71,6 +90,7 @@ CONFIG_HAVE_CBPF_JIT=y CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_HAVE_CLK=y CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_COPY_THREAD_TLS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_HAVE_DEBUG_KMEMLEAK=y CONFIG_HAVE_DEBUG_STACKOVERFLOW=y @@ -104,6 +124,7 @@ CONFIG_HZ_PERIODIC=y CONFIG_INITRAMFS_SOURCE="" CONFIG_IRQCHIP=y CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_MIPS_CPU=y CONFIG_IRQ_WORK=y @@ -114,7 +135,10 @@ CONFIG_LANTIQ_WDT=y # CONFIG_LANTIQ_XRX200 is not set CONFIG_LEDS_GPIO=y CONFIG_LIBFDT=y -CONFIG_MDIO_BOARDINFO=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MFD_CORE=y +CONFIG_MFD_SYSCON=y CONFIG_MIPS=y CONFIG_MIPS_ASID_BITS=8 CONFIG_MIPS_ASID_SHIFT=0 @@ -160,13 +184,20 @@ CONFIG_PCI_DRIVERS_LEGACY=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PGTABLE_LEVELS=2 CONFIG_PHYLIB=y +CONFIG_PHY_LANTIQ_RCU_USB2=y CONFIG_PINCTRL=y CONFIG_PINCTRL_LANTIQ=y # CONFIG_PINCTRL_SINGLE is not set CONFIG_PINCTRL_XWAY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_SYSCON=y CONFIG_PSB6970_PHY=y +# CONFIG_RCU_NEED_SEGCBLIST is not set # CONFIG_RCU_STALL_COMMON is not set +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y CONFIG_RESET_CONTROLLER=y +CONFIG_RESET_LANTIQ=y CONFIG_RTL8366RB_PHY=y CONFIG_RTL8366_SMI=y # CONFIG_SCHED_INFO is not set @@ -194,6 +225,8 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_MIPS16=y CONFIG_SYS_SUPPORTS_MULTITHREADING=y +CONFIG_THIN_ARCHIVES=y CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TINY_SRCU=y CONFIG_USE_OF=y # CONFIG_XRX200_PHY_FW is not set diff --git a/target/linux/lantiq/falcon/config-4.14 b/target/linux/lantiq/falcon/config-4.14 index de4fa3686dc..84b36d0066e 100644 --- a/target/linux/lantiq/falcon/config-4.14 +++ b/target/linux/lantiq/falcon/config-4.14 @@ -1,8 +1,10 @@ +# CONFIG_MFD_CORE is not set CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC=y CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux" CONFIG_PINCTRL_FALCON=y # CONFIG_PSB6970_PHY is not set +# CONFIG_RESET_LANTIQ is not set # CONFIG_RTL8366_SMI is not set CONFIG_SOC_FALCON=y # CONFIG_SOC_TYPE_XWAY is not set diff --git a/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch index 91a6acce3a9..ecabe81e5da 100644 --- a/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch +++ b/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch @@ -41,15 +41,15 @@ Signed-off-by: John Crispin --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig -@@ -17,6 +17,7 @@ config SOC_XWAY +@@ -18,6 +18,7 @@ config SOC_XWAY bool "XWAY" select SOC_TYPE_XWAY select HW_HAS_PCI + select ARCH_SUPPORTS_MSI + select MFD_SYSCON + select MFD_CORE - config SOC_FALCON - bool "FALCON" -@@ -47,6 +48,15 @@ config PCI_LANTIQ +@@ -50,6 +51,15 @@ config PCI_LANTIQ bool "PCI Support" depends on SOC_XWAY && PCI @@ -67,7 +67,7 @@ Signed-off-by: John Crispin depends on SOC_XWAY --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile -@@ -48,6 +48,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o +@@ -49,6 +49,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o @@ -176,7 +176,7 @@ Signed-off-by: John Crispin @@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev - int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) + int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { +#ifdef CONFIG_PCIE_LANTIQ + if (pci_find_capability(dev, PCI_CAP_ID_EXP)) @@ -4143,7 +4143,7 @@ Signed-off-by: John Crispin + --- a/arch/mips/pci/pci-legacy.c +++ b/arch/mips/pci/pci-legacy.c -@@ -300,3 +300,30 @@ char *__init pcibios_setup(char *str) +@@ -309,3 +309,30 @@ char *__init pcibios_setup(char *str) return pcibios_plat_setup(str); return str; } @@ -5494,7 +5494,7 @@ Signed-off-by: John Crispin (transaction layer end-to-end CRC checking). --- a/include/linux/pci.h +++ b/include/linux/pci.h -@@ -1250,6 +1250,8 @@ void pci_walk_bus(struct pci_bus *top, i +@@ -1300,6 +1300,8 @@ void pci_walk_bus(struct pci_bus *top, i void *userdata); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); @@ -5505,7 +5505,7 @@ Signed-off-by: John Crispin unsigned long type); --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h -@@ -1056,6 +1056,12 @@ +@@ -1061,6 +1061,12 @@ #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 #define PCI_DEVICE_ID_SGI_IOC4 0x100a diff --git a/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch index 479decd6a0d..2c73cec55cd 100644 --- a/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch +++ b/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch @@ -431,7 +431,7 @@ Signed-off-by: John Crispin #include #include -@@ -100,6 +101,7 @@ void ltq_mask_and_ack_irq(struct irq_dat +@@ -96,6 +97,7 @@ void ltq_mask_and_ack_irq(struct irq_dat ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); ltq_icu_w32(im, BIT(offset), isr); } @@ -441,7 +441,7 @@ Signed-off-by: John Crispin { --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c -@@ -63,6 +63,8 @@ void (*_dma_cache_wback)(unsigned long s +@@ -64,6 +64,8 @@ void (*_dma_cache_wback)(unsigned long s void (*_dma_cache_inv)(unsigned long start, unsigned long size); EXPORT_SYMBOL(_dma_cache_wback_inv); @@ -452,7 +452,7 @@ Signed-off-by: John Crispin --- a/include/uapi/linux/atm.h +++ b/include/uapi/linux/atm.h -@@ -130,8 +130,14 @@ +@@ -131,8 +131,14 @@ #define ATM_ABR 4 #define ATM_ANYCLASS 5 /* compatible with everything */ @@ -469,16 +469,15 @@ Signed-off-by: John Crispin int max_pcr; /* maximum PCR in cells per second */ --- a/net/atm/common.c +++ b/net/atm/common.c -@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc +@@ -62,10 +62,16 @@ static void vcc_remove_socket(struct soc write_unlock_irq(&vcc_sklist_lock); } +struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL; +EXPORT_SYMBOL(ifx_atm_alloc_tx); + - static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size) + static bool vcc_tx_ready(struct atm_vcc *vcc, unsigned int size) { - struct sk_buff *skb; struct sock *sk = sk_atm(vcc); + if (ifx_atm_alloc_tx != NULL) @@ -489,7 +488,7 @@ Signed-off-by: John Crispin sk_wmem_alloc_get(sk), size, sk->sk_sndbuf); --- a/net/atm/proc.c +++ b/net/atm/proc.c -@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil +@@ -155,7 +155,7 @@ static void *vcc_seq_next(struct seq_fil static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc) { static const char *const class_name[] = { diff --git a/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch index 335a1e26167..52e4cbeb1b5 100644 --- a/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch +++ b/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch @@ -172,9 +172,9 @@ Signed-off-by: John Crispin +#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile -@@ -1,4 +1,10 @@ --obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o -+obj-y := prom.o sysctrl.o clk.o reset.o dma.o dcdc.o +@@ -1,3 +1,9 @@ +-obj-y := prom.o sysctrl.o clk.o dma.o gptu.o dcdc.o ++obj-y := prom.o sysctrl.o clk.o dma.o dcdc.o + +ifdef CONFIG_SOC_AMAZON_SE +obj-y += gptu.o @@ -183,10 +183,9 @@ Signed-off-by: John Crispin +endif obj-y += vmmc.o - --- /dev/null +++ b/arch/mips/lantiq/xway/timer.c -@@ -0,0 +1,845 @@ +@@ -0,0 +1,846 @@ +#ifndef CONFIG_SOC_AMAZON_SE + +#include @@ -201,6 +200,7 @@ Signed-off-by: John Crispin +#include +#include +#include ++#include + +#include +#include @@ -880,14 +880,14 @@ Signed-off-by: John Crispin + int ret; + struct gptu_ioctl_param param; + -+ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param))) ++ if (!access_ok(VERIFY_READ, (void __user *)arg, sizeof(struct gptu_ioctl_param))) + return -EFAULT; -+ copy_from_user(¶m, (void *) arg, sizeof(param)); ++ copy_from_user(¶m, (void __user *)arg, sizeof(param)); + + if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER + || GPTU_SET_COUNTER) && param.timer < 2) + || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER) -+ && !access_ok(VERIFY_WRITE, arg, ++ && !access_ok(VERIFY_WRITE, (void __user *)arg, + sizeof(struct gptu_ioctl_param))) + return -EFAULT; + diff --git a/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch index 64bf2aaca8f..502c5af9f2c 100644 --- a/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch +++ b/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c -@@ -137,7 +137,11 @@ ltq_mtd_probe(struct platform_device *pd +@@ -131,7 +131,11 @@ ltq_mtd_probe(struct platform_device *pd if (!ltq_mtd->map) return -ENOMEM; diff --git a/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch index f08db650465..6cd456a781e 100644 --- a/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch +++ b/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch @@ -22,8 +22,8 @@ Signed-off-by: John Crispin #include #include -@@ -198,6 +199,10 @@ static int m25p_probe(struct spi_device - enum read_mode mode = SPI_NOR_NORMAL; +@@ -243,6 +244,10 @@ static int m25p_probe(struct spi_device + }; char *flash_name; int ret; + const char __maybe_unused *of_mtd_name = NULL; @@ -33,7 +33,7 @@ Signed-off-by: John Crispin data = dev_get_platdata(&spi->dev); -@@ -227,6 +232,8 @@ static int m25p_probe(struct spi_device +@@ -281,6 +286,8 @@ static int m25p_probe(struct spi_device if (data && data->name) nor->mtd.name = data->name; diff --git a/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-4.14/0023-NET-PHY-add-led-support-for-intel-xway.patch similarity index 91% rename from target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch rename to target/linux/lantiq/patches-4.14/0023-NET-PHY-add-led-support-for-intel-xway.patch index e915277599d..06868428215 100644 --- a/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch +++ b/target/linux/lantiq/patches-4.14/0023-NET-PHY-add-led-support-for-intel-xway.patch @@ -24,34 +24,34 @@ Signed-off-by: John Crispin + + /* store the led values if one was passed by the devicetree */ + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledch", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCH, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCH, tmp); + + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledcl", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCL, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCL, tmp); + + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0h", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0H, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0H, tmp); + + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0l", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0L, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0L, tmp); + + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1h", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1H, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1H, tmp); + + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1l", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1L, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1L, tmp); + + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2h", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3H, tmp); + + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2l", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3L, tmp); + + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3h", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3H, tmp); + + if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3l", &tmp)) -+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3L, tmp); + + return 0; +} @@ -66,8 +66,8 @@ Signed-off-by: John Crispin { int err; @@ -190,6 +235,7 @@ static int xway_gphy_config_init(struct - phy_write_mmd_indirect(phydev, XWAY_MMD_LED2H, MDIO_MMD_VEND2, ledxh); - phy_write_mmd_indirect(phydev, XWAY_MMD_LED2L, MDIO_MMD_VEND2, ledxl); + phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh); + phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl); + vr9_gphy_of_reg_init(phydev); return 0; diff --git a/target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch deleted file mode 100644 index e62ff2f6982..00000000000 --- a/target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch +++ /dev/null @@ -1,364 +0,0 @@ -From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 22 Oct 2012 09:26:24 +0200 -Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs - -Signed-off-by: John Crispin ---- - firmware/Makefile | 4 + - firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++ - firmware/lantiq/README | 45 ++++++++ - 3 files changed, 335 insertions(+) - create mode 100644 firmware/lantiq/COPYING - create mode 100644 firmware/lantiq/README - ---- a/firmware/Makefile -+++ b/firmware/Makefile -@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P - fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw - fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw - fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin -+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a14.bin -+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a22.bin -+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a14.bin -+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a22.bin - fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin - - fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) ---- /dev/null -+++ b/firmware/lantiq/COPYING -@@ -0,0 +1,286 @@ -+All firmware files are copyrighted by Lantiq Deutschland GmbH. -+The files have been extracted from header files found in Lantiq BSPs. -+If not stated otherwise all files are licensed under GPL. -+ -+======================================================================= -+ -+ GNU GENERAL PUBLIC LICENSE -+ Version 2, June 1991 -+ -+ Copyright (C) 1989, 1991 Free Software Foundation, Inc. -+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ Everyone is permitted to copy and distribute verbatim copies -+ of this license document, but changing it is not allowed. -+ -+ Preamble -+ -+ The licenses for most software are designed to take away your -+freedom to share and change it. By contrast, the GNU General Public -+License is intended to guarantee your freedom to share and change free -+software--to make sure the software is free for all its users. This -+General Public License applies to most of the Free Software -+Foundation's software and to any other program whose authors commit to -+using it. (Some other Free Software Foundation software is covered by -+the GNU Library General Public License instead.) You can apply it to -+your programs, too. -+ -+ When we speak of free software, we are referring to freedom, not -+price. Our General Public Licenses are designed to make sure that you -+have the freedom to distribute copies of free software (and charge for -+this service if you wish), that you receive source code or can get it -+if you want it, that you can change the software or use pieces of it -+in new free programs; and that you know you can do these things. -+ -+ To protect your rights, we need to make restrictions that forbid -+anyone to deny you these rights or to ask you to surrender the rights. -+These restrictions translate to certain responsibilities for you if you -+distribute copies of the software, or if you modify it. -+ -+ For example, if you distribute copies of such a program, whether -+gratis or for a fee, you must give the recipients all the rights that -+you have. You must make sure that they, too, receive or can get the -+source code. And you must show them these terms so they know their -+rights. -+ -+ We protect your rights with two steps: (1) copyright the software, and -+(2) offer you this license which gives you legal permission to copy, -+distribute and/or modify the software. -+ -+ Also, for each author's protection and ours, we want to make certain -+that everyone understands that there is no warranty for this free -+software. If the software is modified by someone else and passed on, we -+want its recipients to know that what they have is not the original, so -+that any problems introduced by others will not reflect on the original -+authors' reputations. -+ -+ Finally, any free program is threatened constantly by software -+patents. We wish to avoid the danger that redistributors of a free -+program will individually obtain patent licenses, in effect making the -+program proprietary. To prevent this, we have made it clear that any -+patent must be licensed for everyone's free use or not licensed at all. -+ -+ The precise terms and conditions for copying, distribution and -+modification follow. -+ -+ GNU GENERAL PUBLIC LICENSE -+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION -+ -+ 0. This License applies to any program or other work which contains -+a notice placed by the copyright holder saying it may be distributed -+under the terms of this General Public License. The "Program", below, -+refers to any such program or work, and a "work based on the Program" -+means either the Program or any derivative work under copyright law: -+that is to say, a work containing the Program or a portion of it, -+either verbatim or with modifications and/or translated into another -+language. (Hereinafter, translation is included without limitation in -+the term "modification".) Each licensee is addressed as "you". -+ -+Activities other than copying, distribution and modification are not -+covered by this License; they are outside its scope. The act of -+running the Program is not restricted, and the output from the Program -+is covered only if its contents constitute a work based on the -+Program (independent of having been made by running the Program). -+Whether that is true depends on what the Program does. -+ -+ 1. You may copy and distribute verbatim copies of the Program's -+source code as you receive it, in any medium, provided that you -+conspicuously and appropriately publish on each copy an appropriate -+copyright notice and disclaimer of warranty; keep intact all the -+notices that refer to this License and to the absence of any warranty; -+and give any other recipients of the Program a copy of this License -+along with the Program. -+ -+You may charge a fee for the physical act of transferring a copy, and -+you may at your option offer warranty protection in exchange for a fee. -+ -+ 2. You may modify your copy or copies of the Program or any portion -+of it, thus forming a work based on the Program, and copy and -+distribute such modifications or work under the terms of Section 1 -+above, provided that you also meet all of these conditions: -+ -+ a) You must cause the modified files to carry prominent notices -+ stating that you changed the files and the date of any change. -+ -+ b) You must cause any work that you distribute or publish, that in -+ whole or in part contains or is derived from the Program or any -+ part thereof, to be licensed as a whole at no charge to all third -+ parties under the terms of this License. -+ -+ c) If the modified program normally reads commands interactively -+ when run, you must cause it, when started running for such -+ interactive use in the most ordinary way, to print or display an -+ announcement including an appropriate copyright notice and a -+ notice that there is no warranty (or else, saying that you provide -+ a warranty) and that users may redistribute the program under -+ these conditions, and telling the user how to view a copy of this -+ License. (Exception: if the Program itself is interactive but -+ does not normally print such an announcement, your work based on -+ the Program is not required to print an announcement.) -+ -+These requirements apply to the modified work as a whole. If -+identifiable sections of that work are not derived from the Program, -+and can be reasonably considered independent and separate works in -+themselves, then this License, and its terms, do not apply to those -+sections when you distribute them as separate works. But when you -+distribute the same sections as part of a whole which is a work based -+on the Program, the distribution of the whole must be on the terms of -+this License, whose permissions for other licensees extend to the -+entire whole, and thus to each and every part regardless of who wrote it. -+ -+Thus, it is not the intent of this section to claim rights or contest -+your rights to work written entirely by you; rather, the intent is to -+exercise the right to control the distribution of derivative or -+collective works based on the Program. -+ -+In addition, mere aggregation of another work not based on the Program -+with the Program (or with a work based on the Program) on a volume of -+a storage or distribution medium does not bring the other work under -+the scope of this License. -+ -+ 3. You may copy and distribute the Program (or a work based on it, -+under Section 2) in object code or executable form under the terms of -+Sections 1 and 2 above provided that you also do one of the following: -+ -+ a) Accompany it with the complete corresponding machine-readable -+ source code, which must be distributed under the terms of Sections -+ 1 and 2 above on a medium customarily used for software interchange; or, -+ -+ b) Accompany it with a written offer, valid for at least three -+ years, to give any third party, for a charge no more than your -+ cost of physically performing source distribution, a complete -+ machine-readable copy of the corresponding source code, to be -+ distributed under the terms of Sections 1 and 2 above on a medium -+ customarily used for software interchange; or, -+ -+ c) Accompany it with the information you received as to the offer -+ to distribute corresponding source code. (This alternative is -+ allowed only for noncommercial distribution and only if you -+ received the program in object code or executable form with such -+ an offer, in accord with Subsection b above.) -+ -+The source code for a work means the preferred form of the work for -+making modifications to it. For an executable work, complete source -+code means all the source code for all modules it contains, plus any -+associated interface definition files, plus the scripts used to -+control compilation and installation of the executable. However, as a -+special exception, the source code distributed need not include -+anything that is normally distributed (in either source or binary -+form) with the major components (compiler, kernel, and so on) of the -+operating system on which the executable runs, unless that component -+itself accompanies the executable. -+ -+If distribution of executable or object code is made by offering -+access to copy from a designated place, then offering equivalent -+access to copy the source code from the same place counts as -+distribution of the source code, even though third parties are not -+compelled to copy the source along with the object code. -+ -+ 4. You may not copy, modify, sublicense, or distribute the Program -+except as expressly provided under this License. Any attempt -+otherwise to copy, modify, sublicense or distribute the Program is -+void, and will automatically terminate your rights under this License. -+However, parties who have received copies, or rights, from you under -+this License will not have their licenses terminated so long as such -+parties remain in full compliance. -+ -+ 5. You are not required to accept this License, since you have not -+signed it. However, nothing else grants you permission to modify or -+distribute the Program or its derivative works. These actions are -+prohibited by law if you do not accept this License. Therefore, by -+modifying or distributing the Program (or any work based on the -+Program), you indicate your acceptance of this License to do so, and -+all its terms and conditions for copying, distributing or modifying -+the Program or works based on it. -+ -+ 6. Each time you redistribute the Program (or any work based on the -+Program), the recipient automatically receives a license from the -+original licensor to copy, distribute or modify the Program subject to -+these terms and conditions. You may not impose any further -+restrictions on the recipients' exercise of the rights granted herein. -+You are not responsible for enforcing compliance by third parties to -+this License. -+ -+ 7. If, as a consequence of a court judgment or allegation of patent -+infringement or for any other reason (not limited to patent issues), -+conditions are imposed on you (whether by court order, agreement or -+otherwise) that contradict the conditions of this License, they do not -+excuse you from the conditions of this License. If you cannot -+distribute so as to satisfy simultaneously your obligations under this -+License and any other pertinent obligations, then as a consequence you -+may not distribute the Program at all. For example, if a patent -+license would not permit royalty-free redistribution of the Program by -+all those who receive copies directly or indirectly through you, then -+the only way you could satisfy both it and this License would be to -+refrain entirely from distribution of the Program. -+ -+If any portion of this section is held invalid or unenforceable under -+any particular circumstance, the balance of the section is intended to -+apply and the section as a whole is intended to apply in other -+circumstances. -+ -+It is not the purpose of this section to induce you to infringe any -+patents or other property right claims or to contest validity of any -+such claims; this section has the sole purpose of protecting the -+integrity of the free software distribution system, which is -+implemented by public license practices. Many people have made -+generous contributions to the wide range of software distributed -+through that system in reliance on consistent application of that -+system; it is up to the author/donor to decide if he or she is willing -+to distribute software through any other system and a licensee cannot -+impose that choice. -+ -+This section is intended to make thoroughly clear what is believed to -+be a consequence of the rest of this License. -+ -+ 8. If the distribution and/or use of the Program is restricted in -+certain countries either by patents or by copyrighted interfaces, the -+original copyright holder who places the Program under this License -+may add an explicit geographical distribution limitation excluding -+those countries, so that distribution is permitted only in or among -+countries not thus excluded. In such case, this License incorporates -+the limitation as if written in the body of this License. -+ -+ 9. The Free Software Foundation may publish revised and/or new versions -+of the General Public License from time to time. Such new versions will -+be similar in spirit to the present version, but may differ in detail to -+address new problems or concerns. -+ -+Each version is given a distinguishing version number. If the Program -+specifies a version number of this License which applies to it and "any -+later version", you have the option of following the terms and conditions -+either of that version or of any later version published by the Free -+Software Foundation. If the Program does not specify a version number of -+this License, you may choose any version ever published by the Free Software -+Foundation. -+ -+ 10. If you wish to incorporate parts of the Program into other free -+programs whose distribution conditions are different, write to the author -+to ask for permission. For software which is copyrighted by the Free -+Software Foundation, write to the Free Software Foundation; we sometimes -+make exceptions for this. Our decision will be guided by the two goals -+of preserving the free status of all derivatives of our free software and -+of promoting the sharing and reuse of software generally. -+ -+ NO WARRANTY -+ -+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -+REPAIR OR CORRECTION. -+ -+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -+POSSIBILITY OF SUCH DAMAGES. -+ -+ END OF TERMS AND CONDITIONS ---- /dev/null -+++ b/firmware/lantiq/README -@@ -0,0 +1,45 @@ -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+# (C) Copyright 2007 - 2012 -+# Lantiq Deutschland GmbH -+# -+# (C) Copyright 2012 -+# Daniel Schwierzeck -+# -+ -+# -+# How to use -+# -+Configure kernel with: -+CONFIG_FW_LOADER=y -+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR" -+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES" -+ -+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list -+of space separated files from list below. -+ -+# -+# Firmware files -+# -+ -+# GPHY core on Lantiq XWAY VR9 v1.1 -+lantiq/xrx200_phy11g_a14.bin -+lantiq/xrx200_phy22f_a14.bin -+ -+# GPHY core on Lantiq XWAY VR9 v1.2 -+lantiq/xrx200_phy11g_a22.bin -+lantiq/xrx200_phy22f_a22.bin diff --git a/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch index 5224e7a00bd..7eaf0b7b7bb 100644 --- a/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch +++ b/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch @@ -16,7 +16,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig -@@ -104,7 +104,13 @@ config LANTIQ_ETOP +@@ -107,7 +107,13 @@ config LANTIQ_ETOP tristate "Lantiq SoC ETOP driver" depends on SOC_TYPE_XWAY ---help--- @@ -33,7 +33,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net source "drivers/net/ethernet/mediatek/Kconfig" --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile -@@ -46,6 +46,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal +@@ -50,6 +50,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal obj-$(CONFIG_JME) += jme.o obj-$(CONFIG_KORINA) += korina.o obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o @@ -209,7 +209,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net +}; --- /dev/null +++ b/drivers/net/ethernet/lantiq_xrx200.c -@@ -0,0 +1,1851 @@ +@@ -0,0 +1,1887 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -240,6 +240,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net +#include +#include +#include ++#include + +#include +#include @@ -1460,16 +1461,12 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net +static void xrx200_mdio_link(struct net_device *dev) +{ + struct xrx200_priv *priv = netdev_priv(dev); -+ bool link = false; + int i; + + for (i = 0; i < priv->num_port; i++) { + if (!priv->port[i].phydev) + continue; + -+ if (priv->port[i].phydev->link) -+ link = true; -+ + if (priv->port[i].link != priv->port[i].phydev->link) { + xrx200_gmac_update(&priv->port[i]); + priv->port[i].link = priv->port[i].phydev->link; @@ -1478,8 +1475,6 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + (priv->port[i].link)?("got"):("lost")); + } + } -+ if (netif_carrier_ok(dev) && !link) -+ netif_carrier_off(dev); +} + +static inline int xrx200_mdio_poll(struct mii_bus *bus) @@ -1525,6 +1520,35 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + return ltq_mdio_r32(MDIO_READ); +} + ++static int xrx200_phy_has_link(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ int i; ++ ++ for (i = 0; i < priv->num_port; i++) { ++ if (!priv->port[i].phydev) ++ continue; ++ ++ if (priv->port[i].phydev->link) ++ return 1; ++ } ++ ++ return 0; ++} ++ ++static void xrx200_phy_link_change(struct phy_device *phydev, bool up, bool do_carrier) ++{ ++ struct net_device *netdev = phydev->attached_dev; ++ ++ if (do_carrier) ++ if (up) ++ netif_carrier_on(netdev); ++ else if (!xrx200_phy_has_link(netdev)) ++ netif_carrier_off(netdev); ++ ++ phydev->adjust_link(netdev); ++} ++ +static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port) +{ + struct xrx200_priv *priv = netdev_priv(dev); @@ -1557,7 +1581,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + | SUPPORTED_TP); + phydev->advertising = phydev->supported; + port->phydev = phydev; -+ phydev->no_auto_carrier_off = true; ++ phydev->phy_link_change = xrx200_phy_link_change; + + phy_attached_info(phydev); + @@ -1880,7 +1904,6 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + .ndo_start_xmit = xrx200_start_xmit, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, -+ .ndo_change_mtu = eth_change_mtu, + .ndo_get_stats = xrx200_get_stats, + .ndo_tx_timeout = xrx200_tx_timeout, +}; @@ -1937,7 +1960,9 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net +static int xrx200_probe(struct platform_device *pdev) +{ + struct resource *res[4]; -+ struct device_node *mdio_np, *iface_np; ++ struct device_node *mdio_np, *iface_np, *phy_np; ++ struct of_phandle_iterator it; ++ int err; + int i; + + /* load the memory ranges */ @@ -1958,6 +1983,17 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + return -ENOMEM; + } + ++ of_for_each_phandle(&it, err, pdev->dev.of_node, "lantiq,phys", NULL, 0) { ++ phy_np = it.node; ++ if (phy_np) { ++ struct platform_device *phy = of_find_device_by_node(phy_np); ++ ++ of_node_put(phy_np); ++ if (!platform_get_drvdata(phy)) ++ return -EPROBE_DEFER; ++ } ++ } ++ + /* get the clock */ + xrx200_hw.clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(xrx200_hw.clk)) { diff --git a/target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch b/target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch deleted file mode 100644 index 6046d6cde17..00000000000 --- a/target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch +++ /dev/null @@ -1,53 +0,0 @@ -From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 27 Jul 2014 09:38:50 +0100 -Subject: [PATCH 26/36] NET: multi phy support - -Signed-off-by: John Crispin ---- - drivers/net/phy/phy.c | 9 ++++++--- - include/linux/phy.h | 1 + - 2 files changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -1032,7 +1032,8 @@ void phy_state_machine(struct work_struc - /* If the link is down, give up on negotiation for now */ - if (!phydev->link) { - phydev->state = PHY_NOLINK; -- netif_carrier_off(phydev->attached_dev); -+ if (!phydev->no_auto_carrier_off) -+ netif_carrier_off(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); - break; - } -@@ -1124,7 +1125,8 @@ void phy_state_machine(struct work_struc - netif_carrier_on(phydev->attached_dev); - } else { - phydev->state = PHY_NOLINK; -- netif_carrier_off(phydev->attached_dev); -+ if (!phydev->no_auto_carrier_off) -+ netif_carrier_off(phydev->attached_dev); - } - - phydev->adjust_link(phydev->attached_dev); -@@ -1136,7 +1138,8 @@ void phy_state_machine(struct work_struc - case PHY_HALTED: - if (phydev->link) { - phydev->link = 0; -- netif_carrier_off(phydev->attached_dev); -+ if (!phydev->no_auto_carrier_off) -+ netif_carrier_off(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); - do_suspend = true; - } ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -369,6 +369,7 @@ struct phy_device { - bool is_pseudo_fixed_link; - bool has_fixups; - bool suspended; -+ bool no_auto_carrier_off; - - enum phy_state state; - diff --git a/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch index dc99f48eae7..83aef78ca0c 100644 --- a/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch +++ b/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch @@ -328,10 +328,11 @@ Signed-off-by: John Crispin struct ltq_etop_priv *priv = netdev_priv(dev); - int i; + int mii_mode = priv->mii_mode; -+ -+ clk_enable(priv->clk_ppe); - ltq_pmu_enable(PMU_PPE); ++ clk_enable(priv->clk_ppe); + +- switch (priv->pldata->mii_mode) { + if (of_machine_is_compatible("lantiq,ar9")) { + ltq_etop_gbit_init(dev); + /* force the etops link to the gbit to MII */ @@ -340,8 +341,7 @@ Signed-off-by: John Crispin + ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG); + ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX | + MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG); - -- switch (priv->pldata->mii_mode) { ++ + switch (mii_mode) { case PHY_INTERFACE_MODE_RMII: - ltq_etop_w32_mask(ETOP_MII_MASK, @@ -440,19 +440,7 @@ Signed-off-by: John Crispin } static void -@@ -303,7 +448,10 @@ ltq_etop_get_drvinfo(struct net_device * - static int - ltq_etop_nway_reset(struct net_device *dev) - { -- return phy_start_aneg(dev->phydev); -+ if (dev->phydev) -+ return phy_start_aneg(dev->phydev); -+ else -+ return 0; - } - - static const struct ethtool_ops ltq_etop_ethtool_ops = { -@@ -314,6 +462,39 @@ static const struct ethtool_ops ltq_etop +@@ -308,6 +453,39 @@ static const struct ethtool_ops ltq_etop }; static int @@ -492,7 +480,7 @@ Signed-off-by: John Crispin ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data) { u32 val = MDIO_REQUEST | -@@ -321,9 +502,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in +@@ -315,9 +493,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) | phy_data; @@ -504,7 +492,7 @@ Signed-off-by: John Crispin return 0; } -@@ -334,12 +515,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in +@@ -328,12 +506,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) | ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET); @@ -521,7 +509,7 @@ Signed-off-by: John Crispin return val; } -@@ -354,8 +535,18 @@ ltq_etop_mdio_probe(struct net_device *d +@@ -348,8 +526,18 @@ ltq_etop_mdio_probe(struct net_device *d { struct ltq_etop_priv *priv = netdev_priv(dev); struct phy_device *phydev; @@ -541,7 +529,7 @@ Signed-off-by: John Crispin if (!phydev) { netdev_err(dev, "no PHY found\n"); -@@ -363,21 +554,18 @@ ltq_etop_mdio_probe(struct net_device *d +@@ -357,21 +545,18 @@ ltq_etop_mdio_probe(struct net_device *d } phydev = phy_connect(dev, phydev_name(phydev), @@ -568,7 +556,7 @@ Signed-off-by: John Crispin phydev->advertising = phydev->supported; phy_attached_info(phydev); -@@ -398,8 +586,13 @@ ltq_etop_mdio_init(struct net_device *de +@@ -392,8 +577,13 @@ ltq_etop_mdio_init(struct net_device *de } priv->mii_bus->priv = dev; @@ -584,7 +572,7 @@ Signed-off-by: John Crispin priv->mii_bus->name = "ltq_mii"; snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", priv->pdev->name, priv->pdev->id); -@@ -436,17 +629,19 @@ static int +@@ -430,17 +620,19 @@ static int ltq_etop_open(struct net_device *dev) { struct ltq_etop_priv *priv = netdev_priv(dev); @@ -613,7 +601,7 @@ Signed-off-by: John Crispin netif_tx_start_all_queues(dev); return 0; } -@@ -455,18 +650,19 @@ static int +@@ -449,18 +641,19 @@ static int ltq_etop_stop(struct net_device *dev) { struct ltq_etop_priv *priv = netdev_priv(dev); @@ -643,7 +631,7 @@ Signed-off-by: John Crispin return 0; } -@@ -476,16 +672,16 @@ ltq_etop_tx(struct sk_buff *skb, struct +@@ -470,16 +663,16 @@ ltq_etop_tx(struct sk_buff *skb, struct int queue = skb_get_queue_mapping(skb); struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); struct ltq_etop_priv *priv = netdev_priv(dev); @@ -665,7 +653,7 @@ Signed-off-by: John Crispin netdev_err(dev, "tx ring full\n"); netif_tx_stop_queue(txq); return NETDEV_TX_BUSY; -@@ -493,7 +689,7 @@ ltq_etop_tx(struct sk_buff *skb, struct +@@ -487,7 +680,7 @@ ltq_etop_tx(struct sk_buff *skb, struct /* dma needs to start on a 16 byte aligned address */ byte_offset = CPHYSADDR(skb->data) % 16; @@ -674,7 +662,7 @@ Signed-off-by: John Crispin netif_trans_update(dev); -@@ -503,11 +699,11 @@ ltq_etop_tx(struct sk_buff *skb, struct +@@ -497,11 +690,11 @@ ltq_etop_tx(struct sk_buff *skb, struct wmb(); desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); @@ -689,19 +677,19 @@ Signed-off-by: John Crispin netif_tx_stop_queue(txq); return NETDEV_TX_OK; -@@ -522,8 +718,10 @@ ltq_etop_change_mtu(struct net_device *d - struct ltq_etop_priv *priv = netdev_priv(dev); - unsigned long flags; +@@ -515,8 +708,10 @@ ltq_etop_change_mtu(struct net_device *d -+ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN; + dev->mtu = new_mtu; + ++ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN; + - spin_lock_irqsave(&priv->lock, flags); -- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu, -+ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max, - LTQ_ETOP_IGPLEN); - spin_unlock_irqrestore(&priv->lock, flags); - } -@@ -592,6 +790,9 @@ ltq_etop_init(struct net_device *dev) + spin_lock_irqsave(&priv->lock, flags); +- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu, LTQ_ETOP_IGPLEN); ++ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max, LTQ_ETOP_IGPLEN); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +@@ -584,6 +779,9 @@ ltq_etop_init(struct net_device *dev) if (err) goto err_hw; ltq_etop_change_mtu(dev, 1500); @@ -711,7 +699,7 @@ Signed-off-by: John Crispin memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); if (!is_valid_ether_addr(mac.sa_data)) { -@@ -609,9 +810,10 @@ ltq_etop_init(struct net_device *dev) +@@ -601,9 +799,10 @@ ltq_etop_init(struct net_device *dev) dev->addr_assign_type = NET_ADDR_RANDOM; ltq_etop_set_multicast_list(dev); @@ -725,7 +713,7 @@ Signed-off-by: John Crispin return 0; err_netdev: -@@ -631,6 +833,9 @@ ltq_etop_tx_timeout(struct net_device *d +@@ -623,6 +822,9 @@ ltq_etop_tx_timeout(struct net_device *d err = ltq_etop_hw_init(dev); if (err) goto err_hw; @@ -735,7 +723,7 @@ Signed-off-by: John Crispin netif_trans_update(dev); netif_wake_queue(dev); return; -@@ -654,14 +859,19 @@ static const struct net_device_ops ltq_e +@@ -646,14 +848,19 @@ static const struct net_device_ops ltq_e .ndo_tx_timeout = ltq_etop_tx_timeout, }; @@ -759,7 +747,7 @@ Signed-off-by: John Crispin res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { -@@ -687,31 +897,62 @@ ltq_etop_probe(struct platform_device *p +@@ -679,31 +886,62 @@ ltq_etop_probe(struct platform_device *p goto err_out; } @@ -837,7 +825,7 @@ Signed-off-by: John Crispin err = register_netdev(dev); if (err) -@@ -740,31 +981,22 @@ ltq_etop_remove(struct platform_device * +@@ -732,31 +970,22 @@ ltq_etop_remove(struct platform_device * return 0; } diff --git a/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch index e2a421b27ed..30b6a11818b 100644 --- a/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch +++ b/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch @@ -22,7 +22,7 @@ Signed-off-by: John Crispin #include "gpiolib.h" -@@ -538,3 +540,73 @@ void of_gpiochip_remove(struct gpio_chip +@@ -506,3 +508,73 @@ void of_gpiochip_remove(struct gpio_chip gpiochip_remove_pin_ranges(chip); of_node_put(chip->of_node); } @@ -98,7 +98,7 @@ Signed-off-by: John Crispin +#endif --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h -@@ -126,6 +126,12 @@ static inline int gpio_export(unsigned g +@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g return gpiod_export(gpio_to_desc(gpio), direction_may_change); } @@ -113,7 +113,7 @@ Signed-off-by: John Crispin { --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h -@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get +@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) @@ -121,7 +121,7 @@ Signed-off-by: John Crispin int gpiod_export(struct gpio_desc *desc, bool direction_may_change); int gpiod_export_link(struct device *dev, const char *name, struct gpio_desc *desc); -@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de +@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ @@ -137,7 +137,7 @@ Signed-off-by: John Crispin { --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c -@@ -544,7 +544,7 @@ static struct class gpio_class = { +@@ -553,7 +553,7 @@ static struct class gpio_class = { * * Returns zero on success, else an error. */ @@ -146,7 +146,7 @@ Signed-off-by: John Crispin { struct gpio_chip *chip; struct gpio_device *gdev; -@@ -606,6 +606,8 @@ int gpiod_export(struct gpio_desc *desc, +@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc, offset = gpio_chip_hwgpio(desc); if (chip->names && chip->names[offset]) ioname = chip->names[offset]; @@ -155,7 +155,7 @@ Signed-off-by: John Crispin dev = device_create_with_groups(&gpio_class, &gdev->dev, MKDEV(0, 0), data, gpio_groups, -@@ -627,6 +629,12 @@ err_unlock: +@@ -636,6 +638,12 @@ err_unlock: gpiod_dbg(desc, "%s: status %d\n", __func__, status); return status; } diff --git a/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch index c275b55ef1d..a1e1cceddc6 100644 --- a/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch +++ b/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch @@ -18,7 +18,7 @@ Signed-off-by: John Crispin --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -643,6 +643,16 @@ config I2C_MESON +@@ -696,6 +696,16 @@ config I2C_MESON If you say yes to this option, support will be included for the I2C interface on the Amlogic Meson family of SoCs. @@ -37,7 +37,7 @@ Signed-off-by: John Crispin depends on PPC --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile -@@ -59,6 +59,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o +@@ -68,6 +68,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-l obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o diff --git a/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch index a5ecd94c4a9..2e0ce468f06 100644 --- a/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch +++ b/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch @@ -27,14 +27,13 @@ Signed-off-by: John Crispin #endif /* _LTQ_XWAY_H__ */ --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile -@@ -8,4 +8,7 @@ endif +@@ -7,3 +7,6 @@ obj-y += timer.o + endif obj-y += vmmc.o - ++ +obj-y += eth_mac.o +obj-$(CONFIG_PCI) += ath5k_eep.o -+ - obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o --- /dev/null +++ b/arch/mips/lantiq/xway/ath5k_eep.c @@ -0,0 +1,136 @@ @@ -204,7 +203,7 @@ Signed-off-by: John Crispin +early_param("ethaddr", setup_ethaddr); --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c -@@ -794,7 +794,11 @@ ltq_etop_init(struct net_device *dev) +@@ -783,7 +783,11 @@ ltq_etop_init(struct net_device *dev) if (err) goto err_hw; diff --git a/target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch b/target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch deleted file mode 100644 index fc6312310e1..00000000000 --- a/target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -42,6 +42,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -544,6 +545,7 @@ static int dwc2_driver_probe(struct plat - struct dwc2_hsotg *hsotg; - struct resource *res; - int retval; -+ int gpio_count; - - match = of_match_device(dwc2_of_match_table, &dev->dev); - if (match && match->data) { -@@ -562,6 +564,16 @@ static int dwc2_driver_probe(struct plat - defparams.dma_desc_fs_enable = 0; - } - -+ gpio_count = of_gpio_count(dev->dev.of_node); -+ while (gpio_count > 0) { -+ enum of_gpio_flags flags; -+ int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags); -+ if (gpio_request(gpio, "usb")) -+ continue; -+ dev_info(&dev->dev, "requested GPIO %d\n", gpio); -+ gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); -+ } -+ - hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); - if (!hsotg) - return -ENOMEM; diff --git a/target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch b/target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch deleted file mode 100644 index a2fc9d955d9..00000000000 --- a/target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/pinctrl/pinctrl-xway.c -+++ b/drivers/pinctrl/pinctrl-xway.c -@@ -1028,7 +1028,7 @@ static const struct ltq_pin_group xrx200 - GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5), - GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6), - GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx), -- GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx), -+ GRP_MUX("usif uart_tx", USIF, xrx200_pins_usif_uart_tx), - GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts), - GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts), - GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr), diff --git a/target/linux/lantiq/patches-4.14/0047-poweroff.patch b/target/linux/lantiq/patches-4.14/0047-poweroff.patch deleted file mode 100644 index 54249bba521..00000000000 --- a/target/linux/lantiq/patches-4.14/0047-poweroff.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/mips/lantiq/xway/reset.c -+++ b/arch/mips/lantiq/xway/reset.c -@@ -301,12 +301,6 @@ static void ltq_machine_halt(void) - unreachable(); - } - --static void ltq_machine_power_off(void) --{ -- local_irq_disable(); -- unreachable(); --} -- - static void ltq_usb_init(void) - { - /* Power for USB cores 1 & 2 */ -@@ -379,7 +373,6 @@ static int __init mips_reboot_setup(void - - _machine_restart = ltq_machine_restart; - _machine_halt = ltq_machine_halt; -- pm_power_off = ltq_machine_power_off; - - return 0; - } diff --git a/target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch b/target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch deleted file mode 100644 index c0d7afc5412..00000000000 --- a/target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Felix Fietkau -Date: Thu, 19 Jan 2017 12:14:44 +0100 -Subject: [PATCH] MIPS: Lantiq: Fix cascaded IRQ setup - -With the IRQ stack changes integrated, the XRX200 devices started -emitting a constant stream of kernel messages like this: - -[ 565.415310] Spurious IRQ: CAUSE=0x1100c300 - -This appears to be caused by IP0 firing for some reason without being -handled. Fix this by setting up IP2-6 as a proper chained IRQ handler and -calling do_IRQ for all MIPS CPU interrupts. - -Cc: john@phrozen.org -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau ---- - ---- a/arch/mips/lantiq/irq.c -+++ b/arch/mips/lantiq/irq.c -@@ -271,6 +271,11 @@ static void ltq_hw5_irqdispatch(void) - DEFINE_HWx_IRQDISPATCH(5) - #endif - -+static void ltq_hw_irq_handler(struct irq_desc *desc) -+{ -+ ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2); -+} -+ - #ifdef CONFIG_MIPS_MT_SMP - void __init arch_init_ipiirq(int irq, struct irqaction *action) - { -@@ -315,23 +320,19 @@ static struct irqaction irq_call = { - asmlinkage void plat_irq_dispatch(void) - { - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; -- unsigned int i; -+ int irq; - -- if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) { -- do_IRQ(MIPS_CPU_TIMER_IRQ); -- goto out; -- } else { -- for (i = 0; i < MAX_IM; i++) { -- if (pending & (CAUSEF_IP2 << i)) { -- ltq_hw_irqdispatch(i); -- goto out; -- } -- } -+ if (!pending) { -+ spurious_interrupt(); -+ return; - } -- pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status()); - --out: -- return; -+ pending >>= CAUSEB_IP; -+ while (pending) { -+ irq = fls(pending) - 1; -+ do_IRQ(MIPS_CPU_IRQ_BASE + irq); -+ pending &= ~BIT(irq); -+ } - } - - static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) -@@ -356,11 +357,6 @@ static const struct irq_domain_ops irq_d - .map = icu_map, - }; - --static struct irqaction cascade = { -- .handler = no_action, -- .name = "cascade", --}; -- - int __init icu_of_init(struct device_node *node, struct device_node *parent) - { - struct device_node *eiu_node; -@@ -392,7 +388,7 @@ int __init icu_of_init(struct device_nod - mips_cpu_irq_init(); - - for (i = 0; i < MAX_IM; i++) -- setup_irq(i + 2, &cascade); -+ irq_set_chained_handler(i + 2, ltq_hw_irq_handler); - - if (cpu_has_vint) { - pr_info("Setting up vectored interrupts\n"); diff --git a/target/linux/lantiq/patches-4.14/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-4.14/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch new file mode 100644 index 00000000000..37894244e50 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch @@ -0,0 +1,78 @@ +From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Fri, 6 Jan 2017 17:55:24 +0100 +Subject: [PATCH 2/2] usb: dwc2: add support for other Lantiq SoCs + +The size of the internal RAM of the DesignWare USB controller changed +between the different Lantiq SoCs. We have the following sizes: + +Amazon + Danube: 8 KByte +Amazon SE + arx100: 2 KByte +xrx200 + xrx300: 2.5 KByte + +For Danube SoC we do not provide the params and let the driver decide +to use sane defaults, for the Amazon SE and arx100 we use small fifos +and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo. +The auto detection of max_transfer_size and max_packet_count should +work, so remove it. + +Signed-off-by: Hauke Mehrtens +--- + drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++------- + 1 file changed, 39 insertions(+), 7 deletions(-) + +--- a/drivers/usb/dwc2/params.c ++++ b/drivers/usb/dwc2/params.c +@@ -83,7 +83,14 @@ static void dwc2_set_rk_params(struct dw + GAHBCFG_HBSTLEN_SHIFT; + } + +-static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg) ++static void dwc2_set_ltq_danube_params(struct dwc2_hsotg *hsotg) ++{ ++ struct dwc2_core_params *p = &hsotg->params; ++ ++ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; ++} ++ ++static void dwc2_set_ltq_ase_params(struct dwc2_hsotg *hsotg) + { + struct dwc2_core_params *p = &hsotg->params; + +@@ -91,12 +98,20 @@ static void dwc2_set_ltq_params(struct d + p->host_rx_fifo_size = 288; + p->host_nperio_tx_fifo_size = 128; + p->host_perio_tx_fifo_size = 96; +- p->max_transfer_size = 65535; +- p->max_packet_count = 511; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT; + } + ++static void dwc2_set_ltq_xrx200_params(struct dwc2_hsotg *hsotg) ++{ ++ struct dwc2_core_params *p = &hsotg->params; ++ ++ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; ++ p->host_rx_fifo_size = 288; ++ p->host_nperio_tx_fifo_size = 128; ++ p->host_perio_tx_fifo_size = 136; ++} ++ + static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) + { + struct dwc2_core_params *p = &hsotg->params; +@@ -140,8 +155,11 @@ const struct of_device_id dwc2_of_match_ + { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params }, + { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params }, + { .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params }, +- { .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params }, +- { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params }, ++ { .compatible = "lantiq,danube-usb", .data = &dwc2_set_ltq_danube_params }, ++ { .compatible = "lantiq,ase-usb", .data = &dwc2_set_ltq_ase_params }, ++ { .compatible = "lantiq,arx100-usb", .data = &dwc2_set_ltq_ase_params }, ++ { .compatible = "lantiq,xrx200-usb", .data = &dwc2_set_ltq_xrx200_params }, ++ { .compatible = "lantiq,xrx300-usb", .data = &dwc2_set_ltq_xrx200_params }, + { .compatible = "snps,dwc2" }, + { .compatible = "samsung,s3c6400-hsotg" }, + { .compatible = "amlogic,meson8-usb", diff --git a/target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch new file mode 100644 index 00000000000..5030bbf3dd3 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch @@ -0,0 +1,49 @@ +From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Fri, 6 Jan 2017 17:40:12 +0100 +Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization + +This adds code to initialize the USB controller and PHY also on Danube, +Amazon SE and AR10. This code is based on the Vendor driver from +different UGW versions and compared to the hardware documentation. + +Signed-off-by: Hauke Mehrtens +--- + arch/mips/lantiq/xway/sysctrl.c | 20 +++++++ + 2 files changed, 110 insertions(+), 30 deletions(-) + + +--- a/arch/mips/lantiq/xway/sysctrl.c ++++ b/arch/mips/lantiq/xway/sysctrl.c +@@ -246,6 +246,25 @@ static void pmu_disable(struct clk *clk) + pr_warn("deactivating PMU module failed!"); + } + ++static void usb_set_clock(void) ++{ ++ unsigned int val = ltq_cgu_r32(ifccr); ++ ++ if (of_machine_is_compatible("lantiq,ar10") || ++ of_machine_is_compatible("lantiq,grx390")) { ++ val &= ~0x03; /* XTAL divided by 3 */ ++ } else if (of_machine_is_compatible("lantiq,ar9") || ++ of_machine_is_compatible("lantiq,vr9")) { ++ /* TODO: this depends on the XTAL frequency */ ++ val |= 0x03; /* XTAL divided by 3 */ ++ } else if (of_machine_is_compatible("lantiq,ase")) { ++ val |= 0x20; /* from XTAL */ ++ } else if (of_machine_is_compatible("lantiq,danube")) { ++ val |= 0x30; /* 12 MHz, generated from 36 MHz */ ++ } ++ ltq_cgu_w32(val, ifccr); ++} ++ + /* the pci enable helper */ + static int pci_enable(struct clk *clk) + { +@@ -569,4 +588,5 @@ void __init ltq_soc_init(void) + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); + clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); + } ++ usb_set_clock(); + } diff --git a/target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch deleted file mode 100644 index 4d184439432..00000000000 --- a/target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch +++ /dev/null @@ -1,130 +0,0 @@ -From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Fri, 6 Jan 2017 17:55:24 +0100 -Subject: [PATCH 2/2] usb: dwc2: add support for other Lantiq SoCs - -The size of the internal RAM of the DesignWare USB controller changed -between the different Lantiq SoCs. We have the following sizes: - -Amazon + Danube: 8 KByte -Amazon SE + arx100: 2 KByte -xrx200 + xrx300: 2.5 KByte - -For Danube SoC we do not provide the params and let the driver decide -to use sane defaults, for the Amazon SE and arx100 we use small fifos -and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo. -The auto detection of max_transfer_size and max_packet_count should -work, so remove it. - -Signed-off-by: Hauke Mehrtens ---- - drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++------- - 1 file changed, 39 insertions(+), 7 deletions(-) - ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -151,7 +151,38 @@ static const struct dwc2_core_params par - .hibernation = -1, - }; - --static const struct dwc2_core_params params_ltq = { -+static const struct dwc2_core_params params_danube = { -+ .otg_cap = 2, /* non-HNP/non-SRP */ -+ .otg_ver = -1, -+ .dma_enable = -1, -+ .dma_desc_enable = -1, -+ .dma_desc_fs_enable = -1, -+ .speed = -1, -+ .enable_dynamic_fifo = -1, -+ .en_multiple_tx_fifo = -1, -+ .host_rx_fifo_size = -1, -+ .host_nperio_tx_fifo_size = -1, -+ .host_perio_tx_fifo_size = -1, -+ .max_transfer_size = -1, -+ .max_packet_count = -1, -+ .host_channels = -1, -+ .phy_type = -1, -+ .phy_utmi_width = -1, -+ .phy_ulpi_ddr = -1, -+ .phy_ulpi_ext_vbus = -1, -+ .i2c_enable = -1, -+ .ulpi_fs_ls = -1, -+ .host_support_fs_ls_low_power = -1, -+ .host_ls_low_power_phy_clk = -1, -+ .ts_dline = -1, -+ .reload_ctl = -1, -+ .ahbcfg = -1, -+ .uframe_sched = -1, -+ .external_id_pin_ctl = -1, -+ .hibernation = -1, -+}; -+ -+static const struct dwc2_core_params params_ase = { - .otg_cap = 2, /* non-HNP/non-SRP */ - .otg_ver = -1, - .dma_enable = -1, -@@ -163,8 +194,8 @@ static const struct dwc2_core_params par - .host_rx_fifo_size = 288, /* 288 DWORDs */ - .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ - .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ -- .max_transfer_size = 65535, -- .max_packet_count = 511, -+ .max_transfer_size = -1, -+ .max_packet_count = -1, - .host_channels = -1, - .phy_type = -1, - .phy_utmi_width = -1, -@@ -176,8 +207,37 @@ static const struct dwc2_core_params par - .host_ls_low_power_phy_clk = -1, - .ts_dline = -1, - .reload_ctl = -1, -- .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << -- GAHBCFG_HBSTLEN_SHIFT, -+ .ahbcfg = -1, -+ .uframe_sched = -1, -+ .external_id_pin_ctl = -1, -+ .hibernation = -1, -+}; -+ -+static const struct dwc2_core_params params_xrx200 = { -+ .otg_cap = 2, /* non-HNP/non-SRP */ -+ .otg_ver = -1, -+ .dma_enable = -1, -+ .dma_desc_enable = -1, -+ .speed = -1, -+ .enable_dynamic_fifo = -1, -+ .en_multiple_tx_fifo = -1, -+ .host_rx_fifo_size = 288, /* 288 DWORDs */ -+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ -+ .host_perio_tx_fifo_size = 136, /* 136 DWORDs */ -+ .max_transfer_size = -1, -+ .max_packet_count = -1, -+ .host_channels = -1, -+ .phy_type = -1, -+ .phy_utmi_width = -1, -+ .phy_ulpi_ddr = -1, -+ .phy_ulpi_ext_vbus = -1, -+ .i2c_enable = -1, -+ .ulpi_fs_ls = -1, -+ .host_support_fs_ls_low_power = -1, -+ .host_ls_low_power_phy_clk = -1, -+ .ts_dline = -1, -+ .reload_ctl = -1, -+ .ahbcfg = -1, - .uframe_sched = -1, - .external_id_pin_ctl = -1, - .hibernation = -1, -@@ -515,8 +575,11 @@ static const struct of_device_id dwc2_of - { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, - { .compatible = "hisilicon,hi6220-usb", .data = ¶ms_hi6220 }, - { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, -- { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq }, -- { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq }, -+ { .compatible = "lantiq,danube-usb", .data = ¶ms_danube }, -+ { .compatible = "lantiq,ase-usb", .data = ¶ms_ase }, -+ { .compatible = "lantiq,arx100-usb", .data = ¶ms_ase }, -+ { .compatible = "lantiq,xrx200-usb", .data = ¶ms_xrx200 }, -+ { .compatible = "lantiq,xrx300-usb", .data = ¶ms_xrx200 }, - { .compatible = "snps,dwc2", .data = NULL }, - { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, - { .compatible = "amlogic,meson8b-usb", .data = ¶ms_amlogic }, diff --git a/target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch deleted file mode 100644 index acc23080f11..00000000000 --- a/target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch +++ /dev/null @@ -1,202 +0,0 @@ -From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Fri, 6 Jan 2017 17:40:12 +0100 -Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization - -This adds code to initialize the USB controller and PHY also on Danube, -Amazon SE and AR10. This code is based on the Vendor driver from -different UGW versions and compared to the hardware documentation. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/lantiq/xway/reset.c | 120 ++++++++++++++++++++++++++++++---------- - arch/mips/lantiq/xway/sysctrl.c | 20 +++++++ - 2 files changed, 110 insertions(+), 30 deletions(-) - ---- a/arch/mips/lantiq/xway/reset.c -+++ b/arch/mips/lantiq/xway/reset.c -@@ -72,6 +72,8 @@ - #define RCU_USBCFG_HDSEL_BIT BIT(11) - #define RCU_USBCFG_HOST_END_BIT BIT(10) - #define RCU_USBCFG_SLV_END_BIT BIT(9) -+#define RCU_USBCFG_SLV_END_BIT_AR9 BIT(17) -+ - - /* USB reset bits */ - #define RCU_USBRESET 0x0010 -@@ -85,6 +87,8 @@ - - #define RCU_CFG1A 0x0038 - #define RCU_CFG1B 0x003C -+#define RCU_CFG1_TX_PEE BIT(0) -+#define RCU_CFG1_DIS_THR_SHIFT 15 /* Disconnect Threshold */ - - /* USB PMU devices */ - #define PMU_AHBM BIT(15) -@@ -306,38 +310,91 @@ static void ltq_usb_init(void) - /* Power for USB cores 1 & 2 */ - ltq_pmu_enable(PMU_AHBM); - ltq_pmu_enable(PMU_USB0); -- ltq_pmu_enable(PMU_USB1); - -- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A); -- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B); -+ if (of_machine_is_compatible("lantiq,ar10") || -+ of_machine_is_compatible("lantiq,grx390") || -+ of_machine_is_compatible("lantiq,ar9") || -+ of_machine_is_compatible("lantiq,vr9")) -+ ltq_pmu_enable(PMU_USB1); -+ -+ if (of_machine_is_compatible("lantiq,vr9") || -+ of_machine_is_compatible("lantiq,ar10")) { -+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE | -+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE | -+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B); -+ } - - /* Enable USB PHY power for cores 1 & 2 */ - ltq_pmu_enable(PMU_USB0_P); -- ltq_pmu_enable(PMU_USB1_P); -+ if (of_machine_is_compatible("lantiq,ar10") || -+ of_machine_is_compatible("lantiq,grx390") || -+ of_machine_is_compatible("lantiq,ar9") || -+ of_machine_is_compatible("lantiq,vr9")) -+ ltq_pmu_enable(PMU_USB1_P); -+ -+ if (of_machine_is_compatible("lantiq,ase") || -+ of_machine_is_compatible("lantiq,danube")) { -+ /* Configure cores to host mode */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB1CFG); -+ -+ /* Select DMA endianness (Host-endian: big-endian) */ -+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); -+ } -+ -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ /* Configure cores to host mode */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB1CFG); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB2CFG); -+ -+ /* Select DMA endianness (Host-endian: big-endian) */ -+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); -+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); -+ } -+ -+ if (of_machine_is_compatible("lantiq,vr9") || -+ of_machine_is_compatible("lantiq,ar10")) { -+ /* Configure cores to host mode */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB1CFG); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB2CFG); -+ -+ /* Select DMA endianness (Host-endian: big-endian) */ -+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); -+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); -+ } -+ -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ /* Hard reset USB state machines */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) -+ | USBRESET_BIT | BIT(28), RCU_USBRESET); -+ udelay(50 * 1000); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) -+ & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET); -+ } else { -+ /* Hard reset USB state machines */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); -+ udelay(50 * 1000); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); -+ } - -- /* Configure cores to host mode */ -- ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, -- RCU_USB1CFG); -- ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, -- RCU_USB2CFG); -- -- /* Select DMA endianness (Host-endian: big-endian) */ -- ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) -- | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); -- ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) -- | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); -- -- /* Hard reset USB state machines */ -- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); -- udelay(50 * 1000); -- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); -- -- /* Soft reset USB state machines */ -- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) -- | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); -- udelay(50 * 1000); -- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) -- & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); -+ if (of_machine_is_compatible("lantiq,vr9")) { -+ /* Soft reset USB state machines */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) -+ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); -+ udelay(50 * 1000); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) -+ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); -+ } - } - - static int __init mips_reboot_setup(void) -@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void - if (!ltq_rcu_membase) - panic("Failed to remap core memory"); - -- if (of_machine_is_compatible("lantiq,ar9") || -- of_machine_is_compatible("lantiq,vr9")) -+ if (of_machine_is_compatible("lantiq,danube") || -+ of_machine_is_compatible("lantiq,ase") || -+ of_machine_is_compatible("lantiq,ar9") || -+ of_machine_is_compatible("lantiq,vr9") || -+ of_machine_is_compatible("lantiq,ar10")) - ltq_usb_init(); - - if (of_machine_is_compatible("lantiq,vr9")) ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk) - pr_warn("deactivating PMU module failed!"); - } - -+static void usb_set_clock(void) -+{ -+ unsigned int val = ltq_cgu_r32(ifccr); -+ -+ if (of_machine_is_compatible("lantiq,ar10") || -+ of_machine_is_compatible("lantiq,grx390")) { -+ val &= ~0x03; /* XTAL divided by 3 */ -+ } else if (of_machine_is_compatible("lantiq,ar9") || -+ of_machine_is_compatible("lantiq,vr9")) { -+ /* TODO: this depends on the XTAL frequency */ -+ val |= 0x03; /* XTAL divided by 3 */ -+ } else if (of_machine_is_compatible("lantiq,ase")) { -+ val |= 0x20; /* from XTAL */ -+ } else if (of_machine_is_compatible("lantiq,danube")) { -+ val |= 0x30; /* 12 MHz, generated from 36 MHz */ -+ } -+ ltq_cgu_w32(val, ifccr); -+} -+ - /* the pci enable helper */ - static int pci_enable(struct clk *clk) - { -@@ -608,4 +627,5 @@ void __init ltq_soc_init(void) - - if (of_machine_is_compatible("lantiq,vr9")) - xbar_fpi_burst_disable(); -+ usb_set_clock(); - } diff --git a/target/linux/lantiq/patches-4.14/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch b/target/linux/lantiq/patches-4.14/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch deleted file mode 100644 index da48ae3a189..00000000000 --- a/target/linux/lantiq/patches-4.14/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch +++ /dev/null @@ -1,1078 +0,0 @@ -From 941ab0bc001fe24e5f8ce88eed27f2a1b89f3e20 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Tue, 14 Feb 2017 00:31:11 +0100 -Subject: spi: lantiq-ssc: add support for Lantiq SSC SPI controller - -This driver supports the Lantiq SSC SPI controller in master -mode. This controller is found on Intel (former Lantiq) SoCs like -the Danube, Falcon, xRX200, xRX300. - -The hardware uses two hardware FIFOs one for received and one for -transferred bytes. When the driver writes data into the transmit FIFO -the complete word is taken from the FIFO into a shift register. The -data from this shift register is then written to the wire. This driver -uses the interrupts signaling the status of the FIFOs and not the shift -register. It is also possible to use the interrupts for the shift -register, but they will send a signal after every word. When using the -interrupts for the shift register we get a signal when the last word is -written into the shift register and not when it is written to the wire. -After all FIFOs are empty the driver busy waits till the hardware is -not busy any more and returns the transfer status. - -Signed-off-by: Daniel Schwierzeck -Signed-off-by: Hauke Mehrtens -Signed-off-by: Mark Brown ---- - .../devicetree/bindings/spi/spi-lantiq-ssc.txt | 29 + - drivers/spi/Kconfig | 8 + - drivers/spi/Makefile | 1 + - drivers/spi/spi-lantiq-ssc.c | 983 +++++++++++++++++++++ - 4 files changed, 1021 insertions(+) - create mode 100644 Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt - create mode 100644 drivers/spi/spi-lantiq-ssc.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt -@@ -0,0 +1,29 @@ -+Lantiq Synchronous Serial Controller (SSC) SPI master driver -+ -+Required properties: -+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi" -+- #address-cells: see spi-bus.txt -+- #size-cells: see spi-bus.txt -+- reg: address and length of the spi master registers -+- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt. -+ -+ -+Optional properties: -+- clocks: spi clock phandle -+- num-cs: see spi-bus.txt, set to 8 if unset -+- base-cs: the number of the first chip select, set to 1 if unset. -+ -+Example: -+ -+ -+spi: spi@E100800 { -+ compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; -+ reg = <0xE100800 0x100>; -+ interrupt-parent = <&icu0>; -+ interrupts = <22 23 24>; -+ interrupt-names = "spi_rx", "spi_tx", "spi_err"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ num-cs = <6>; -+ base-cs = <1>; -+}; ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -403,6 +403,14 @@ config SPI_NUC900 - help - SPI driver for Nuvoton NUC900 series ARM SoCs - -+config SPI_LANTIQ_SSC -+ tristate "Lantiq SSC SPI controller" -+ depends on LANTIQ -+ help -+ This driver supports the Lantiq SSC SPI controller in master -+ mode. This controller is found on Intel (former Lantiq) SoCs like -+ the Danube, Falcon, xRX200, xRX300. -+ - config SPI_OC_TINY - tristate "OpenCores tiny SPI" - depends on GPIOLIB || COMPILE_TEST ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-sp - obj-$(CONFIG_SPI_GPIO) += spi-gpio.o - obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o - obj-$(CONFIG_SPI_IMX) += spi-imx.o -+obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o - obj-$(CONFIG_SPI_JCORE) += spi-jcore.o - obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o - obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o ---- /dev/null -+++ b/drivers/spi/spi-lantiq-ssc.c -@@ -0,0 +1,983 @@ -+/* -+ * Copyright (C) 2011-2015 Daniel Schwierzeck -+ * Copyright (C) 2016 Hauke Mehrtens -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_LANTIQ -+#include -+#endif -+ -+#define SPI_RX_IRQ_NAME "spi_rx" -+#define SPI_TX_IRQ_NAME "spi_tx" -+#define SPI_ERR_IRQ_NAME "spi_err" -+#define SPI_FRM_IRQ_NAME "spi_frm" -+ -+#define SPI_CLC 0x00 -+#define SPI_PISEL 0x04 -+#define SPI_ID 0x08 -+#define SPI_CON 0x10 -+#define SPI_STAT 0x14 -+#define SPI_WHBSTATE 0x18 -+#define SPI_TB 0x20 -+#define SPI_RB 0x24 -+#define SPI_RXFCON 0x30 -+#define SPI_TXFCON 0x34 -+#define SPI_FSTAT 0x38 -+#define SPI_BRT 0x40 -+#define SPI_BRSTAT 0x44 -+#define SPI_SFCON 0x60 -+#define SPI_SFSTAT 0x64 -+#define SPI_GPOCON 0x70 -+#define SPI_GPOSTAT 0x74 -+#define SPI_FPGO 0x78 -+#define SPI_RXREQ 0x80 -+#define SPI_RXCNT 0x84 -+#define SPI_DMACON 0xec -+#define SPI_IRNEN 0xf4 -+#define SPI_IRNICR 0xf8 -+#define SPI_IRNCR 0xfc -+ -+#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ -+#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S) -+#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ -+#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S) -+#define SPI_CLC_DISS BIT(1) /* Disable status bit */ -+#define SPI_CLC_DISR BIT(0) /* Disable request bit */ -+ -+#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ -+#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S) -+#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ -+#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S) -+#define SPI_ID_MOD_S 8 /* Module ID */ -+#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S) -+#define SPI_ID_CFG_S 5 /* DMA interface support */ -+#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S) -+#define SPI_ID_REV_M 0x1F /* Hardware revision number */ -+ -+#define SPI_CON_BM_S 16 /* Data width selection */ -+#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S) -+#define SPI_CON_EM BIT(24) /* Echo mode */ -+#define SPI_CON_IDLE BIT(23) /* Idle bit value */ -+#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */ -+#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ -+#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ -+#define SPI_CON_AEN BIT(10) /* Abort error enable */ -+#define SPI_CON_REN BIT(9) /* Receive overflow error enable */ -+#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ -+#define SPI_CON_LB BIT(7) /* Loopback control */ -+#define SPI_CON_PO BIT(6) /* Clock polarity control */ -+#define SPI_CON_PH BIT(5) /* Clock phase control */ -+#define SPI_CON_HB BIT(4) /* Heading control */ -+#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */ -+#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ -+ -+#define SPI_STAT_RXBV_S 28 -+#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S) -+#define SPI_STAT_BSY BIT(13) /* Busy flag */ -+#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ -+#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ -+#define SPI_STAT_AE BIT(10) /* Abort error flag */ -+#define SPI_STAT_RE BIT(9) /* Receive error flag */ -+#define SPI_STAT_TE BIT(8) /* Transmit error flag */ -+#define SPI_STAT_ME BIT(7) /* Mode error flag */ -+#define SPI_STAT_MS BIT(1) /* Master/slave select bit */ -+#define SPI_STAT_EN BIT(0) /* Enable bit */ -+#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \ -+ SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE) -+ -+#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ -+#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ -+#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ -+#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ -+#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ -+#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ -+#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ -+#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ -+#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ -+#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ -+#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ -+#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ -+#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ -+#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ -+#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ -+#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ -+#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \ -+ SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \ -+ SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE) -+ -+#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ -+#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S) -+#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ -+#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ -+ -+#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ -+#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S) -+#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ -+#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ -+ -+#define SPI_FSTAT_RXFFL_S 0 -+#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S) -+#define SPI_FSTAT_TXFFL_S 8 -+#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S) -+ -+#define SPI_GPOCON_ISCSBN_S 8 -+#define SPI_GPOCON_INVOUTN_S 0 -+ -+#define SPI_FGPO_SETOUTN_S 8 -+#define SPI_FGPO_CLROUTN_S 0 -+ -+#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ -+#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ -+ -+#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ -+#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ -+#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */ -+#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ -+#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ -+#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ -+#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ -+#define SPI_IRNEN_ALL 0x1F -+ -+struct lantiq_ssc_hwcfg { -+ unsigned int irnen_r; -+ unsigned int irnen_t; -+}; -+ -+struct lantiq_ssc_spi { -+ struct spi_master *master; -+ struct device *dev; -+ void __iomem *regbase; -+ struct clk *spi_clk; -+ struct clk *fpi_clk; -+ const struct lantiq_ssc_hwcfg *hwcfg; -+ -+ spinlock_t lock; -+ struct workqueue_struct *wq; -+ struct work_struct work; -+ -+ const u8 *tx; -+ u8 *rx; -+ unsigned int tx_todo; -+ unsigned int rx_todo; -+ unsigned int bits_per_word; -+ unsigned int speed_hz; -+ unsigned int tx_fifo_size; -+ unsigned int rx_fifo_size; -+ unsigned int base_cs; -+}; -+ -+static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg) -+{ -+ return __raw_readl(spi->regbase + reg); -+} -+ -+static void lantiq_ssc_writel(const struct lantiq_ssc_spi *spi, u32 val, -+ u32 reg) -+{ -+ __raw_writel(val, spi->regbase + reg); -+} -+ -+static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr, -+ u32 set, u32 reg) -+{ -+ u32 val = __raw_readl(spi->regbase + reg); -+ -+ val &= ~clr; -+ val |= set; -+ __raw_writel(val, spi->regbase + reg); -+} -+ -+static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi) -+{ -+ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); -+ -+ return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S; -+} -+ -+static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi) -+{ -+ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); -+ -+ return fstat & SPI_FSTAT_RXFFL_M; -+} -+ -+static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi) -+{ -+ return spi->tx_fifo_size - tx_fifo_level(spi); -+} -+ -+static void rx_fifo_reset(const struct lantiq_ssc_spi *spi) -+{ -+ u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S; -+ -+ val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU; -+ lantiq_ssc_writel(spi, val, SPI_RXFCON); -+} -+ -+static void tx_fifo_reset(const struct lantiq_ssc_spi *spi) -+{ -+ u32 val = 1 << SPI_TXFCON_TXFITL_S; -+ -+ val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU; -+ lantiq_ssc_writel(spi, val, SPI_TXFCON); -+} -+ -+static void rx_fifo_flush(const struct lantiq_ssc_spi *spi) -+{ -+ lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON); -+} -+ -+static void tx_fifo_flush(const struct lantiq_ssc_spi *spi) -+{ -+ lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON); -+} -+ -+static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi) -+{ -+ lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE); -+} -+ -+static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi) -+{ -+ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE); -+} -+ -+static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi, -+ unsigned int max_speed_hz) -+{ -+ u32 spi_clk, brt; -+ -+ /* -+ * SPI module clock is derived from FPI bus clock dependent on -+ * divider value in CLC.RMS which is always set to 1. -+ * -+ * f_SPI -+ * baudrate = -------------- -+ * 2 * (BR + 1) -+ */ -+ spi_clk = clk_get_rate(spi->fpi_clk) / 2; -+ -+ if (max_speed_hz > spi_clk) -+ brt = 0; -+ else -+ brt = spi_clk / max_speed_hz - 1; -+ -+ if (brt > 0xFFFF) -+ brt = 0xFFFF; -+ -+ dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", -+ spi_clk, max_speed_hz, brt); -+ -+ lantiq_ssc_writel(spi, brt, SPI_BRT); -+} -+ -+static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi, -+ unsigned int bits_per_word) -+{ -+ u32 bm; -+ -+ /* CON.BM value = bits_per_word - 1 */ -+ bm = (bits_per_word - 1) << SPI_CON_BM_S; -+ -+ lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON); -+} -+ -+static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi, -+ unsigned int mode) -+{ -+ u32 con_set = 0, con_clr = 0; -+ -+ /* -+ * SPI mode mapping in CON register: -+ * Mode CPOL CPHA CON.PO CON.PH -+ * 0 0 0 0 1 -+ * 1 0 1 0 0 -+ * 2 1 0 1 1 -+ * 3 1 1 1 0 -+ */ -+ if (mode & SPI_CPHA) -+ con_clr |= SPI_CON_PH; -+ else -+ con_set |= SPI_CON_PH; -+ -+ if (mode & SPI_CPOL) -+ con_set |= SPI_CON_PO | SPI_CON_IDLE; -+ else -+ con_clr |= SPI_CON_PO | SPI_CON_IDLE; -+ -+ /* Set heading control */ -+ if (mode & SPI_LSB_FIRST) -+ con_clr |= SPI_CON_HB; -+ else -+ con_set |= SPI_CON_HB; -+ -+ /* Set loopback mode */ -+ if (mode & SPI_LOOP) -+ con_set |= SPI_CON_LB; -+ else -+ con_clr |= SPI_CON_LB; -+ -+ lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON); -+} -+ -+static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi) -+{ -+ const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; -+ -+ /* -+ * Set clock divider for run mode to 1 to -+ * run at same frequency as FPI bus -+ */ -+ lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC); -+ -+ /* Put controller into config mode */ -+ hw_enter_config_mode(spi); -+ -+ /* Clear error flags */ -+ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); -+ -+ /* Enable error checking, disable TX/RX */ -+ lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN | -+ SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); -+ -+ /* Setup default SPI mode */ -+ hw_setup_bits_per_word(spi, spi->bits_per_word); -+ hw_setup_clock_mode(spi, SPI_MODE_0); -+ -+ /* Enable master mode and clear error flags */ -+ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS, -+ SPI_WHBSTATE); -+ -+ /* Reset GPIO/CS registers */ -+ lantiq_ssc_writel(spi, 0, SPI_GPOCON); -+ lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO); -+ -+ /* Enable and flush FIFOs */ -+ rx_fifo_reset(spi); -+ tx_fifo_reset(spi); -+ -+ /* Enable interrupts */ -+ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E, -+ SPI_IRNEN); -+} -+ -+static int lantiq_ssc_setup(struct spi_device *spidev) -+{ -+ struct spi_master *master = spidev->master; -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ unsigned int cs = spidev->chip_select; -+ u32 gpocon; -+ -+ /* GPIOs are used for CS */ -+ if (gpio_is_valid(spidev->cs_gpio)) -+ return 0; -+ -+ dev_dbg(spi->dev, "using internal chipselect %u\n", cs); -+ -+ if (cs < spi->base_cs) { -+ dev_err(spi->dev, -+ "chipselect %i too small (min %i)\n", cs, spi->base_cs); -+ return -EINVAL; -+ } -+ -+ /* set GPO pin to CS mode */ -+ gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S); -+ -+ /* invert GPO pin */ -+ if (spidev->mode & SPI_CS_HIGH) -+ gpocon |= 1 << (cs - spi->base_cs); -+ -+ lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON); -+ -+ return 0; -+} -+ -+static int lantiq_ssc_prepare_message(struct spi_master *master, -+ struct spi_message *message) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ -+ hw_enter_config_mode(spi); -+ hw_setup_clock_mode(spi, message->spi->mode); -+ hw_enter_active_mode(spi); -+ -+ return 0; -+} -+ -+static void hw_setup_transfer(struct lantiq_ssc_spi *spi, -+ struct spi_device *spidev, struct spi_transfer *t) -+{ -+ unsigned int speed_hz = t->speed_hz; -+ unsigned int bits_per_word = t->bits_per_word; -+ u32 con; -+ -+ if (bits_per_word != spi->bits_per_word || -+ speed_hz != spi->speed_hz) { -+ hw_enter_config_mode(spi); -+ hw_setup_speed_hz(spi, speed_hz); -+ hw_setup_bits_per_word(spi, bits_per_word); -+ hw_enter_active_mode(spi); -+ -+ spi->speed_hz = speed_hz; -+ spi->bits_per_word = bits_per_word; -+ } -+ -+ /* Configure transmitter and receiver */ -+ con = lantiq_ssc_readl(spi, SPI_CON); -+ if (t->tx_buf) -+ con &= ~SPI_CON_TXOFF; -+ else -+ con |= SPI_CON_TXOFF; -+ -+ if (t->rx_buf) -+ con &= ~SPI_CON_RXOFF; -+ else -+ con |= SPI_CON_RXOFF; -+ -+ lantiq_ssc_writel(spi, con, SPI_CON); -+} -+ -+static int lantiq_ssc_unprepare_message(struct spi_master *master, -+ struct spi_message *message) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ -+ flush_workqueue(spi->wq); -+ -+ /* Disable transmitter and receiver while idle */ -+ lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); -+ -+ return 0; -+} -+ -+static void tx_fifo_write(struct lantiq_ssc_spi *spi) -+{ -+ const u8 *tx8; -+ const u16 *tx16; -+ const u32 *tx32; -+ u32 data; -+ unsigned int tx_free = tx_fifo_free(spi); -+ -+ while (spi->tx_todo && tx_free) { -+ switch (spi->bits_per_word) { -+ case 2 ... 8: -+ tx8 = spi->tx; -+ data = *tx8; -+ spi->tx_todo--; -+ spi->tx++; -+ break; -+ case 16: -+ tx16 = (u16 *) spi->tx; -+ data = *tx16; -+ spi->tx_todo -= 2; -+ spi->tx += 2; -+ break; -+ case 32: -+ tx32 = (u32 *) spi->tx; -+ data = *tx32; -+ spi->tx_todo -= 4; -+ spi->tx += 4; -+ break; -+ default: -+ WARN_ON(1); -+ data = 0; -+ break; -+ } -+ -+ lantiq_ssc_writel(spi, data, SPI_TB); -+ tx_free--; -+ } -+} -+ -+static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi) -+{ -+ u8 *rx8; -+ u16 *rx16; -+ u32 *rx32; -+ u32 data; -+ unsigned int rx_fill = rx_fifo_level(spi); -+ -+ while (rx_fill) { -+ data = lantiq_ssc_readl(spi, SPI_RB); -+ -+ switch (spi->bits_per_word) { -+ case 2 ... 8: -+ rx8 = spi->rx; -+ *rx8 = data; -+ spi->rx_todo--; -+ spi->rx++; -+ break; -+ case 16: -+ rx16 = (u16 *) spi->rx; -+ *rx16 = data; -+ spi->rx_todo -= 2; -+ spi->rx += 2; -+ break; -+ case 32: -+ rx32 = (u32 *) spi->rx; -+ *rx32 = data; -+ spi->rx_todo -= 4; -+ spi->rx += 4; -+ break; -+ default: -+ WARN_ON(1); -+ break; -+ } -+ -+ rx_fill--; -+ } -+} -+ -+static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi) -+{ -+ u32 data, *rx32; -+ u8 *rx8; -+ unsigned int rxbv, shift; -+ unsigned int rx_fill = rx_fifo_level(spi); -+ -+ /* -+ * In RX-only mode the bits per word value is ignored by HW. A value -+ * of 32 is used instead. Thus all 4 bytes per FIFO must be read. -+ * If remaining RX bytes are less than 4, the FIFO must be read -+ * differently. The amount of received and valid bytes is indicated -+ * by STAT.RXBV register value. -+ */ -+ while (rx_fill) { -+ if (spi->rx_todo < 4) { -+ rxbv = (lantiq_ssc_readl(spi, SPI_STAT) & -+ SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S; -+ data = lantiq_ssc_readl(spi, SPI_RB); -+ -+ shift = (rxbv - 1) * 8; -+ rx8 = spi->rx; -+ -+ while (rxbv) { -+ *rx8++ = (data >> shift) & 0xFF; -+ rxbv--; -+ shift -= 8; -+ spi->rx_todo--; -+ spi->rx++; -+ } -+ } else { -+ data = lantiq_ssc_readl(spi, SPI_RB); -+ rx32 = (u32 *) spi->rx; -+ -+ *rx32++ = data; -+ spi->rx_todo -= 4; -+ spi->rx += 4; -+ } -+ rx_fill--; -+ } -+} -+ -+static void rx_request(struct lantiq_ssc_spi *spi) -+{ -+ unsigned int rxreq, rxreq_max; -+ -+ /* -+ * To avoid receive overflows at high clocks it is better to request -+ * only the amount of bytes that fits into all FIFOs. This value -+ * depends on the FIFO size implemented in hardware. -+ */ -+ rxreq = spi->rx_todo; -+ rxreq_max = spi->rx_fifo_size * 4; -+ if (rxreq > rxreq_max) -+ rxreq = rxreq_max; -+ -+ lantiq_ssc_writel(spi, rxreq, SPI_RXREQ); -+} -+ -+static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) -+{ -+ struct lantiq_ssc_spi *spi = data; -+ -+ if (spi->tx) { -+ if (spi->rx && spi->rx_todo) -+ rx_fifo_read_full_duplex(spi); -+ -+ if (spi->tx_todo) -+ tx_fifo_write(spi); -+ else if (!tx_fifo_level(spi)) -+ goto completed; -+ } else if (spi->rx) { -+ if (spi->rx_todo) { -+ rx_fifo_read_half_duplex(spi); -+ -+ if (spi->rx_todo) -+ rx_request(spi); -+ else -+ goto completed; -+ } else { -+ goto completed; -+ } -+ } -+ -+ return IRQ_HANDLED; -+ -+completed: -+ queue_work(spi->wq, &spi->work); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) -+{ -+ struct lantiq_ssc_spi *spi = data; -+ u32 stat = lantiq_ssc_readl(spi, SPI_STAT); -+ -+ if (!(stat & SPI_STAT_ERRORS)) -+ return IRQ_NONE; -+ -+ if (stat & SPI_STAT_RUE) -+ dev_err(spi->dev, "receive underflow error\n"); -+ if (stat & SPI_STAT_TUE) -+ dev_err(spi->dev, "transmit underflow error\n"); -+ if (stat & SPI_STAT_AE) -+ dev_err(spi->dev, "abort error\n"); -+ if (stat & SPI_STAT_RE) -+ dev_err(spi->dev, "receive overflow error\n"); -+ if (stat & SPI_STAT_TE) -+ dev_err(spi->dev, "transmit overflow error\n"); -+ if (stat & SPI_STAT_ME) -+ dev_err(spi->dev, "mode error\n"); -+ -+ /* Clear error flags */ -+ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); -+ -+ /* set bad status so it can be retried */ -+ if (spi->master->cur_msg) -+ spi->master->cur_msg->status = -EIO; -+ queue_work(spi->wq, &spi->work); -+ -+ return IRQ_HANDLED; -+} -+ -+static int transfer_start(struct lantiq_ssc_spi *spi, struct spi_device *spidev, -+ struct spi_transfer *t) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&spi->lock, flags); -+ -+ spi->tx = t->tx_buf; -+ spi->rx = t->rx_buf; -+ -+ if (t->tx_buf) { -+ spi->tx_todo = t->len; -+ -+ /* initially fill TX FIFO */ -+ tx_fifo_write(spi); -+ } -+ -+ if (spi->rx) { -+ spi->rx_todo = t->len; -+ -+ /* start shift clock in RX-only mode */ -+ if (!spi->tx) -+ rx_request(spi); -+ } -+ -+ spin_unlock_irqrestore(&spi->lock, flags); -+ -+ return t->len; -+} -+ -+/* -+ * The driver only gets an interrupt when the FIFO is empty, but there -+ * is an additional shift register from which the data is written to -+ * the wire. We get the last interrupt when the controller starts to -+ * write the last word to the wire, not when it is finished. Do busy -+ * waiting till it finishes. -+ */ -+static void lantiq_ssc_bussy_work(struct work_struct *work) -+{ -+ struct lantiq_ssc_spi *spi; -+ unsigned long long timeout = 8LL * 1000LL; -+ unsigned long end; -+ -+ spi = container_of(work, typeof(*spi), work); -+ -+ do_div(timeout, spi->speed_hz); -+ timeout += timeout + 100; /* some tolerance */ -+ -+ end = jiffies + msecs_to_jiffies(timeout); -+ do { -+ u32 stat = lantiq_ssc_readl(spi, SPI_STAT); -+ -+ if (!(stat & SPI_STAT_BSY)) { -+ spi_finalize_current_transfer(spi->master); -+ return; -+ } -+ -+ cond_resched(); -+ } while (!time_after_eq(jiffies, end)); -+ -+ if (spi->master->cur_msg) -+ spi->master->cur_msg->status = -EIO; -+ spi_finalize_current_transfer(spi->master); -+} -+ -+static void lantiq_ssc_handle_err(struct spi_master *master, -+ struct spi_message *message) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ -+ /* flush FIFOs on timeout */ -+ rx_fifo_flush(spi); -+ tx_fifo_flush(spi); -+} -+ -+static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(spidev->master); -+ unsigned int cs = spidev->chip_select; -+ u32 fgpo; -+ -+ if (!!(spidev->mode & SPI_CS_HIGH) == enable) -+ fgpo = (1 << (cs - spi->base_cs)); -+ else -+ fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S)); -+ -+ lantiq_ssc_writel(spi, fgpo, SPI_FPGO); -+} -+ -+static int lantiq_ssc_transfer_one(struct spi_master *master, -+ struct spi_device *spidev, -+ struct spi_transfer *t) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ -+ hw_setup_transfer(spi, spidev, t); -+ -+ return transfer_start(spi, spidev, t); -+} -+ -+static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = { -+ .irnen_r = SPI_IRNEN_R_XWAY, -+ .irnen_t = SPI_IRNEN_T_XWAY, -+}; -+ -+static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = { -+ .irnen_r = SPI_IRNEN_R_XRX, -+ .irnen_t = SPI_IRNEN_T_XRX, -+}; -+ -+static const struct of_device_id lantiq_ssc_match[] = { -+ { .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, }, -+ { .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, }, -+ { .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, lantiq_ssc_match); -+ -+static int lantiq_ssc_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct spi_master *master; -+ struct resource *res; -+ struct lantiq_ssc_spi *spi; -+ const struct lantiq_ssc_hwcfg *hwcfg; -+ const struct of_device_id *match; -+ int err, rx_irq, tx_irq, err_irq; -+ u32 id, supports_dma, revision; -+ unsigned int num_cs; -+ -+ match = of_match_device(lantiq_ssc_match, dev); -+ if (!match) { -+ dev_err(dev, "no device match\n"); -+ return -EINVAL; -+ } -+ hwcfg = match->data; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(dev, "failed to get resources\n"); -+ return -ENXIO; -+ } -+ -+ rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME); -+ if (rx_irq < 0) { -+ dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME); -+ return -ENXIO; -+ } -+ -+ tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME); -+ if (tx_irq < 0) { -+ dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME); -+ return -ENXIO; -+ } -+ -+ err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME); -+ if (err_irq < 0) { -+ dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME); -+ return -ENXIO; -+ } -+ -+ master = spi_alloc_master(dev, sizeof(struct lantiq_ssc_spi)); -+ if (!master) -+ return -ENOMEM; -+ -+ spi = spi_master_get_devdata(master); -+ spi->master = master; -+ spi->dev = dev; -+ spi->hwcfg = hwcfg; -+ platform_set_drvdata(pdev, spi); -+ -+ spi->regbase = devm_ioremap_resource(dev, res); -+ if (IS_ERR(spi->regbase)) { -+ err = PTR_ERR(spi->regbase); -+ goto err_master_put; -+ } -+ -+ err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt, -+ 0, SPI_RX_IRQ_NAME, spi); -+ if (err) -+ goto err_master_put; -+ -+ err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt, -+ 0, SPI_TX_IRQ_NAME, spi); -+ if (err) -+ goto err_master_put; -+ -+ err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt, -+ 0, SPI_ERR_IRQ_NAME, spi); -+ if (err) -+ goto err_master_put; -+ -+ spi->spi_clk = devm_clk_get(dev, "gate"); -+ if (IS_ERR(spi->spi_clk)) { -+ err = PTR_ERR(spi->spi_clk); -+ goto err_master_put; -+ } -+ err = clk_prepare_enable(spi->spi_clk); -+ if (err) -+ goto err_master_put; -+ -+ /* -+ * Use the old clk_get_fpi() function on Lantiq platform, till it -+ * supports common clk. -+ */ -+#if defined(CONFIG_LANTIQ) && !defined(CONFIG_COMMON_CLK) -+ spi->fpi_clk = clk_get_fpi(); -+#else -+ spi->fpi_clk = clk_get(dev, "freq"); -+#endif -+ if (IS_ERR(spi->fpi_clk)) { -+ err = PTR_ERR(spi->fpi_clk); -+ goto err_clk_disable; -+ } -+ -+ num_cs = 8; -+ of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); -+ -+ spi->base_cs = 1; -+ of_property_read_u32(pdev->dev.of_node, "base-cs", &spi->base_cs); -+ -+ spin_lock_init(&spi->lock); -+ spi->bits_per_word = 8; -+ spi->speed_hz = 0; -+ -+ master->dev.of_node = pdev->dev.of_node; -+ master->num_chipselect = num_cs; -+ master->setup = lantiq_ssc_setup; -+ master->set_cs = lantiq_ssc_set_cs; -+ master->handle_err = lantiq_ssc_handle_err; -+ master->prepare_message = lantiq_ssc_prepare_message; -+ master->unprepare_message = lantiq_ssc_unprepare_message; -+ master->transfer_one = lantiq_ssc_transfer_one; -+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH | -+ SPI_LOOP; -+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) | -+ SPI_BPW_MASK(16) | SPI_BPW_MASK(32); -+ -+ spi->wq = alloc_ordered_workqueue(dev_name(dev), 0); -+ if (!spi->wq) { -+ err = -ENOMEM; -+ goto err_clk_put; -+ } -+ INIT_WORK(&spi->work, lantiq_ssc_bussy_work); -+ -+ id = lantiq_ssc_readl(spi, SPI_ID); -+ spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S; -+ spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S; -+ supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S; -+ revision = id & SPI_ID_REV_M; -+ -+ lantiq_ssc_hw_init(spi); -+ -+ dev_info(dev, -+ "Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n", -+ revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma); -+ -+ err = devm_spi_register_master(dev, master); -+ if (err) { -+ dev_err(dev, "failed to register spi_master\n"); -+ goto err_wq_destroy; -+ } -+ -+ return 0; -+ -+err_wq_destroy: -+ destroy_workqueue(spi->wq); -+err_clk_put: -+ clk_put(spi->fpi_clk); -+err_clk_disable: -+ clk_disable_unprepare(spi->spi_clk); -+err_master_put: -+ spi_master_put(master); -+ -+ return err; -+} -+ -+static int lantiq_ssc_remove(struct platform_device *pdev) -+{ -+ struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev); -+ -+ lantiq_ssc_writel(spi, 0, SPI_IRNEN); -+ lantiq_ssc_writel(spi, 0, SPI_CLC); -+ rx_fifo_flush(spi); -+ tx_fifo_flush(spi); -+ hw_enter_config_mode(spi); -+ -+ destroy_workqueue(spi->wq); -+ clk_disable_unprepare(spi->spi_clk); -+ clk_put(spi->fpi_clk); -+ -+ return 0; -+} -+ -+static struct platform_driver lantiq_ssc_driver = { -+ .probe = lantiq_ssc_probe, -+ .remove = lantiq_ssc_remove, -+ .driver = { -+ .name = "spi-lantiq-ssc", -+ .owner = THIS_MODULE, -+ .of_match_table = lantiq_ssc_match, -+ }, -+}; -+module_platform_driver(lantiq_ssc_driver); -+ -+MODULE_DESCRIPTION("Lantiq SSC SPI controller driver"); -+MODULE_AUTHOR("Daniel Schwierzeck "); -+MODULE_AUTHOR("Hauke Mehrtens "); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:spi-lantiq-ssc"); diff --git a/target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch b/target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch deleted file mode 100644 index e81f97f9d4f..00000000000 --- a/target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch +++ /dev/null @@ -1,28 +0,0 @@ -From ba6e1e39969fa5435127a632757e2906caca7730 Mon Sep 17 00:00:00 2001 -From: kbuild test robot -Date: Mon, 20 Feb 2017 01:33:10 +0800 -Subject: spi: lantiq-ssc: fix platform_no_drv_owner.cocci warnings - -drivers/spi/spi-lantiq-ssc.c:973:3-8: No need to set .owner here. The core will do it. - - Remove .owner field if calls are used which set it automatically - -Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci - -Signed-off-by: Fengguang Wu -Acked-by: Hauke Mehrtens -Signed-off-by: Mark Brown ---- - drivers/spi/spi-lantiq-ssc.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/spi/spi-lantiq-ssc.c -+++ b/drivers/spi/spi-lantiq-ssc.c -@@ -970,7 +970,6 @@ static struct platform_driver lantiq_ssc - .remove = lantiq_ssc_remove, - .driver = { - .name = "spi-lantiq-ssc", -- .owner = THIS_MODULE, - .of_match_table = lantiq_ssc_match, - }, - }; diff --git a/target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch b/target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch deleted file mode 100644 index 9bcde3c08a6..00000000000 --- a/target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch +++ /dev/null @@ -1,723 +0,0 @@ -From 1aa83e0a2821cd7f4e8f3ddb367859f52e468bf1 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Mon, 27 Feb 2017 23:21:25 +0100 -Subject: spi: lantiq-ssc: add LTQ_ prefix to defines - -The blackfin architecture has a SPI_STAT define which conflicts with -the define from the spi-lantiq-ssc driver in compile test mode. Fix -this by adding a prefix in front of every define. - -Reported-by: kbuild test robot -Signed-off-by: Hauke Mehrtens -Signed-off-by: Mark Brown ---- - drivers/spi/spi-lantiq-ssc.c | 437 ++++++++++++++++++++++--------------------- - 1 file changed, 222 insertions(+), 215 deletions(-) - ---- a/drivers/spi/spi-lantiq-ssc.c -+++ b/drivers/spi/spi-lantiq-ssc.c -@@ -26,136 +26,140 @@ - #include - #endif - --#define SPI_RX_IRQ_NAME "spi_rx" --#define SPI_TX_IRQ_NAME "spi_tx" --#define SPI_ERR_IRQ_NAME "spi_err" --#define SPI_FRM_IRQ_NAME "spi_frm" -- --#define SPI_CLC 0x00 --#define SPI_PISEL 0x04 --#define SPI_ID 0x08 --#define SPI_CON 0x10 --#define SPI_STAT 0x14 --#define SPI_WHBSTATE 0x18 --#define SPI_TB 0x20 --#define SPI_RB 0x24 --#define SPI_RXFCON 0x30 --#define SPI_TXFCON 0x34 --#define SPI_FSTAT 0x38 --#define SPI_BRT 0x40 --#define SPI_BRSTAT 0x44 --#define SPI_SFCON 0x60 --#define SPI_SFSTAT 0x64 --#define SPI_GPOCON 0x70 --#define SPI_GPOSTAT 0x74 --#define SPI_FPGO 0x78 --#define SPI_RXREQ 0x80 --#define SPI_RXCNT 0x84 --#define SPI_DMACON 0xec --#define SPI_IRNEN 0xf4 --#define SPI_IRNICR 0xf8 --#define SPI_IRNCR 0xfc -- --#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ --#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S) --#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ --#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S) --#define SPI_CLC_DISS BIT(1) /* Disable status bit */ --#define SPI_CLC_DISR BIT(0) /* Disable request bit */ -- --#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ --#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S) --#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ --#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S) --#define SPI_ID_MOD_S 8 /* Module ID */ --#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S) --#define SPI_ID_CFG_S 5 /* DMA interface support */ --#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S) --#define SPI_ID_REV_M 0x1F /* Hardware revision number */ -- --#define SPI_CON_BM_S 16 /* Data width selection */ --#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S) --#define SPI_CON_EM BIT(24) /* Echo mode */ --#define SPI_CON_IDLE BIT(23) /* Idle bit value */ --#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */ --#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ --#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ --#define SPI_CON_AEN BIT(10) /* Abort error enable */ --#define SPI_CON_REN BIT(9) /* Receive overflow error enable */ --#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ --#define SPI_CON_LB BIT(7) /* Loopback control */ --#define SPI_CON_PO BIT(6) /* Clock polarity control */ --#define SPI_CON_PH BIT(5) /* Clock phase control */ --#define SPI_CON_HB BIT(4) /* Heading control */ --#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */ --#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ -- --#define SPI_STAT_RXBV_S 28 --#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S) --#define SPI_STAT_BSY BIT(13) /* Busy flag */ --#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ --#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ --#define SPI_STAT_AE BIT(10) /* Abort error flag */ --#define SPI_STAT_RE BIT(9) /* Receive error flag */ --#define SPI_STAT_TE BIT(8) /* Transmit error flag */ --#define SPI_STAT_ME BIT(7) /* Mode error flag */ --#define SPI_STAT_MS BIT(1) /* Master/slave select bit */ --#define SPI_STAT_EN BIT(0) /* Enable bit */ --#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \ -- SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE) -- --#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ --#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ --#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ --#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ --#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ --#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ --#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ --#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ --#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ --#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ --#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ --#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ --#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ --#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ --#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ --#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ --#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \ -- SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \ -- SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE) -- --#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ --#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S) --#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ --#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ -- --#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ --#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S) --#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ --#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ -- --#define SPI_FSTAT_RXFFL_S 0 --#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S) --#define SPI_FSTAT_TXFFL_S 8 --#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S) -- --#define SPI_GPOCON_ISCSBN_S 8 --#define SPI_GPOCON_INVOUTN_S 0 -- --#define SPI_FGPO_SETOUTN_S 8 --#define SPI_FGPO_CLROUTN_S 0 -- --#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ --#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ -- --#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ --#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ --#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */ --#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ --#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ --#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ --#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ --#define SPI_IRNEN_ALL 0x1F -+#define LTQ_SPI_RX_IRQ_NAME "spi_rx" -+#define LTQ_SPI_TX_IRQ_NAME "spi_tx" -+#define LTQ_SPI_ERR_IRQ_NAME "spi_err" -+#define LTQ_SPI_FRM_IRQ_NAME "spi_frm" -+ -+#define LTQ_SPI_CLC 0x00 -+#define LTQ_SPI_PISEL 0x04 -+#define LTQ_SPI_ID 0x08 -+#define LTQ_SPI_CON 0x10 -+#define LTQ_SPI_STAT 0x14 -+#define LTQ_SPI_WHBSTATE 0x18 -+#define LTQ_SPI_TB 0x20 -+#define LTQ_SPI_RB 0x24 -+#define LTQ_SPI_RXFCON 0x30 -+#define LTQ_SPI_TXFCON 0x34 -+#define LTQ_SPI_FSTAT 0x38 -+#define LTQ_SPI_BRT 0x40 -+#define LTQ_SPI_BRSTAT 0x44 -+#define LTQ_SPI_SFCON 0x60 -+#define LTQ_SPI_SFSTAT 0x64 -+#define LTQ_SPI_GPOCON 0x70 -+#define LTQ_SPI_GPOSTAT 0x74 -+#define LTQ_SPI_FPGO 0x78 -+#define LTQ_SPI_RXREQ 0x80 -+#define LTQ_SPI_RXCNT 0x84 -+#define LTQ_SPI_DMACON 0xec -+#define LTQ_SPI_IRNEN 0xf4 -+#define LTQ_SPI_IRNICR 0xf8 -+#define LTQ_SPI_IRNCR 0xfc -+ -+#define LTQ_SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ -+#define LTQ_SPI_CLC_SMC_M (0xFF << LTQ_SPI_CLC_SMC_S) -+#define LTQ_SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ -+#define LTQ_SPI_CLC_RMC_M (0xFF << LTQ_SPI_CLC_RMC_S) -+#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ -+#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ -+ -+#define LTQ_SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ -+#define LTQ_SPI_ID_TXFS_M (0x3F << LTQ_SPI_ID_TXFS_S) -+#define LTQ_SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ -+#define LTQ_SPI_ID_RXFS_M (0x3F << LTQ_SPI_ID_RXFS_S) -+#define LTQ_SPI_ID_MOD_S 8 /* Module ID */ -+#define LTQ_SPI_ID_MOD_M (0xff << LTQ_SPI_ID_MOD_S) -+#define LTQ_SPI_ID_CFG_S 5 /* DMA interface support */ -+#define LTQ_SPI_ID_CFG_M (1 << LTQ_SPI_ID_CFG_S) -+#define LTQ_SPI_ID_REV_M 0x1F /* Hardware revision number */ -+ -+#define LTQ_SPI_CON_BM_S 16 /* Data width selection */ -+#define LTQ_SPI_CON_BM_M (0x1F << LTQ_SPI_CON_BM_S) -+#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */ -+#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ -+#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ -+#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ -+#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ -+#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */ -+#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ -+#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ -+#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */ -+#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */ -+#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */ -+#define LTQ_SPI_CON_HB BIT(4) /* Heading control */ -+#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ -+#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ -+ -+#define LTQ_SPI_STAT_RXBV_S 28 -+#define LTQ_SPI_STAT_RXBV_M (0x7 << LTQ_SPI_STAT_RXBV_S) -+#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */ -+#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ -+#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ -+#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */ -+#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */ -+#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ -+#define LTQ_SPI_STAT_ME BIT(7) /* Mode error flag */ -+#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ -+#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */ -+#define LTQ_SPI_STAT_ERRORS (LTQ_SPI_STAT_ME | LTQ_SPI_STAT_TE | \ -+ LTQ_SPI_STAT_RE | LTQ_SPI_STAT_AE | \ -+ LTQ_SPI_STAT_TUE | LTQ_SPI_STAT_RUE) -+ -+#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ -+#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ -+#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ -+#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ -+#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ -+#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ -+#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ -+#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ -+#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ -+#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ -+#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ -+#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ -+#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ -+#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ -+#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ -+#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ -+#define LTQ_SPI_WHBSTATE_CLR_ERRORS (LTQ_SPI_WHBSTATE_CLRRUE | \ -+ LTQ_SPI_WHBSTATE_CLRME | \ -+ LTQ_SPI_WHBSTATE_CLRTE | \ -+ LTQ_SPI_WHBSTATE_CLRRE | \ -+ LTQ_SPI_WHBSTATE_CLRAE | \ -+ LTQ_SPI_WHBSTATE_CLRTUE) -+ -+#define LTQ_SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ -+#define LTQ_SPI_RXFCON_RXFITL_M (0x3F << LTQ_SPI_RXFCON_RXFITL_S) -+#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ -+#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ -+ -+#define LTQ_SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ -+#define LTQ_SPI_TXFCON_TXFITL_M (0x3F << LTQ_SPI_TXFCON_TXFITL_S) -+#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ -+#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ -+ -+#define LTQ_SPI_FSTAT_RXFFL_S 0 -+#define LTQ_SPI_FSTAT_RXFFL_M (0x3f << LTQ_SPI_FSTAT_RXFFL_S) -+#define LTQ_SPI_FSTAT_TXFFL_S 8 -+#define LTQ_SPI_FSTAT_TXFFL_M (0x3f << LTQ_SPI_FSTAT_TXFFL_S) -+ -+#define LTQ_SPI_GPOCON_ISCSBN_S 8 -+#define LTQ_SPI_GPOCON_INVOUTN_S 0 -+ -+#define LTQ_SPI_FGPO_SETOUTN_S 8 -+#define LTQ_SPI_FGPO_CLROUTN_S 0 -+ -+#define LTQ_SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ -+#define LTQ_SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ -+ -+#define LTQ_SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ -+#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ -+#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ -+#define LTQ_SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ -+#define LTQ_SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ -+#define LTQ_SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ -+#define LTQ_SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ -+#define LTQ_SPI_IRNEN_ALL 0x1F - - struct lantiq_ssc_hwcfg { - unsigned int irnen_r; -@@ -208,16 +212,16 @@ static void lantiq_ssc_maskl(const struc - - static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi) - { -- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); -+ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); - -- return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S; -+ return (fstat & LTQ_SPI_FSTAT_TXFFL_M) >> LTQ_SPI_FSTAT_TXFFL_S; - } - - static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi) - { -- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); -+ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); - -- return fstat & SPI_FSTAT_RXFFL_M; -+ return fstat & LTQ_SPI_FSTAT_RXFFL_M; - } - - static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi) -@@ -227,38 +231,38 @@ static unsigned int tx_fifo_free(const s - - static void rx_fifo_reset(const struct lantiq_ssc_spi *spi) - { -- u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S; -+ u32 val = spi->rx_fifo_size << LTQ_SPI_RXFCON_RXFITL_S; - -- val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU; -- lantiq_ssc_writel(spi, val, SPI_RXFCON); -+ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU; -+ lantiq_ssc_writel(spi, val, LTQ_SPI_RXFCON); - } - - static void tx_fifo_reset(const struct lantiq_ssc_spi *spi) - { -- u32 val = 1 << SPI_TXFCON_TXFITL_S; -+ u32 val = 1 << LTQ_SPI_TXFCON_TXFITL_S; - -- val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU; -- lantiq_ssc_writel(spi, val, SPI_TXFCON); -+ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU; -+ lantiq_ssc_writel(spi, val, LTQ_SPI_TXFCON); - } - - static void rx_fifo_flush(const struct lantiq_ssc_spi *spi) - { -- lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON); -+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON); - } - - static void tx_fifo_flush(const struct lantiq_ssc_spi *spi) - { -- lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON); -+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON); - } - - static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi) - { -- lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE); -+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE); - } - - static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi) - { -- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE); -+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE); - } - - static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi, -@@ -287,7 +291,7 @@ static void hw_setup_speed_hz(const stru - dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", - spi_clk, max_speed_hz, brt); - -- lantiq_ssc_writel(spi, brt, SPI_BRT); -+ lantiq_ssc_writel(spi, brt, LTQ_SPI_BRT); - } - - static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi, -@@ -296,9 +300,9 @@ static void hw_setup_bits_per_word(const - u32 bm; - - /* CON.BM value = bits_per_word - 1 */ -- bm = (bits_per_word - 1) << SPI_CON_BM_S; -+ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_S; - -- lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON); -+ lantiq_ssc_maskl(spi, LTQ_SPI_CON_BM_M, bm, LTQ_SPI_CON); - } - - static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi, -@@ -315,28 +319,28 @@ static void hw_setup_clock_mode(const st - * 3 1 1 1 0 - */ - if (mode & SPI_CPHA) -- con_clr |= SPI_CON_PH; -+ con_clr |= LTQ_SPI_CON_PH; - else -- con_set |= SPI_CON_PH; -+ con_set |= LTQ_SPI_CON_PH; - - if (mode & SPI_CPOL) -- con_set |= SPI_CON_PO | SPI_CON_IDLE; -+ con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE; - else -- con_clr |= SPI_CON_PO | SPI_CON_IDLE; -+ con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE; - - /* Set heading control */ - if (mode & SPI_LSB_FIRST) -- con_clr |= SPI_CON_HB; -+ con_clr |= LTQ_SPI_CON_HB; - else -- con_set |= SPI_CON_HB; -+ con_set |= LTQ_SPI_CON_HB; - - /* Set loopback mode */ - if (mode & SPI_LOOP) -- con_set |= SPI_CON_LB; -+ con_set |= LTQ_SPI_CON_LB; - else -- con_clr |= SPI_CON_LB; -+ con_clr |= LTQ_SPI_CON_LB; - -- lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON); -+ lantiq_ssc_maskl(spi, con_clr, con_set, LTQ_SPI_CON); - } - - static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi) -@@ -347,37 +351,39 @@ static void lantiq_ssc_hw_init(const str - * Set clock divider for run mode to 1 to - * run at same frequency as FPI bus - */ -- lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC); -+ lantiq_ssc_writel(spi, 1 << LTQ_SPI_CLC_RMC_S, LTQ_SPI_CLC); - - /* Put controller into config mode */ - hw_enter_config_mode(spi); - - /* Clear error flags */ -- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); -+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); - - /* Enable error checking, disable TX/RX */ -- lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN | -- SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); -+ lantiq_ssc_writel(spi, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN | -+ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF | -+ LTQ_SPI_CON_RXOFF, LTQ_SPI_CON); - - /* Setup default SPI mode */ - hw_setup_bits_per_word(spi, spi->bits_per_word); - hw_setup_clock_mode(spi, SPI_MODE_0); - - /* Enable master mode and clear error flags */ -- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS, -- SPI_WHBSTATE); -+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETMS | -+ LTQ_SPI_WHBSTATE_CLR_ERRORS, -+ LTQ_SPI_WHBSTATE); - - /* Reset GPIO/CS registers */ -- lantiq_ssc_writel(spi, 0, SPI_GPOCON); -- lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO); -+ lantiq_ssc_writel(spi, 0, LTQ_SPI_GPOCON); -+ lantiq_ssc_writel(spi, 0xFF00, LTQ_SPI_FPGO); - - /* Enable and flush FIFOs */ - rx_fifo_reset(spi); - tx_fifo_reset(spi); - - /* Enable interrupts */ -- lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E, -- SPI_IRNEN); -+ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | -+ LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN); - } - - static int lantiq_ssc_setup(struct spi_device *spidev) -@@ -400,13 +406,13 @@ static int lantiq_ssc_setup(struct spi_d - } - - /* set GPO pin to CS mode */ -- gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S); -+ gpocon = 1 << ((cs - spi->base_cs) + LTQ_SPI_GPOCON_ISCSBN_S); - - /* invert GPO pin */ - if (spidev->mode & SPI_CS_HIGH) - gpocon |= 1 << (cs - spi->base_cs); - -- lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON); -+ lantiq_ssc_maskl(spi, 0, gpocon, LTQ_SPI_GPOCON); - - return 0; - } -@@ -442,18 +448,18 @@ static void hw_setup_transfer(struct lan - } - - /* Configure transmitter and receiver */ -- con = lantiq_ssc_readl(spi, SPI_CON); -+ con = lantiq_ssc_readl(spi, LTQ_SPI_CON); - if (t->tx_buf) -- con &= ~SPI_CON_TXOFF; -+ con &= ~LTQ_SPI_CON_TXOFF; - else -- con |= SPI_CON_TXOFF; -+ con |= LTQ_SPI_CON_TXOFF; - - if (t->rx_buf) -- con &= ~SPI_CON_RXOFF; -+ con &= ~LTQ_SPI_CON_RXOFF; - else -- con |= SPI_CON_RXOFF; -+ con |= LTQ_SPI_CON_RXOFF; - -- lantiq_ssc_writel(spi, con, SPI_CON); -+ lantiq_ssc_writel(spi, con, LTQ_SPI_CON); - } - - static int lantiq_ssc_unprepare_message(struct spi_master *master, -@@ -464,7 +470,8 @@ static int lantiq_ssc_unprepare_message( - flush_workqueue(spi->wq); - - /* Disable transmitter and receiver while idle */ -- lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); -+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF, -+ LTQ_SPI_CON); - - return 0; - } -@@ -503,7 +510,7 @@ static void tx_fifo_write(struct lantiq_ - break; - } - -- lantiq_ssc_writel(spi, data, SPI_TB); -+ lantiq_ssc_writel(spi, data, LTQ_SPI_TB); - tx_free--; - } - } -@@ -517,7 +524,7 @@ static void rx_fifo_read_full_duplex(str - unsigned int rx_fill = rx_fifo_level(spi); - - while (rx_fill) { -- data = lantiq_ssc_readl(spi, SPI_RB); -+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB); - - switch (spi->bits_per_word) { - case 2 ... 8: -@@ -563,9 +570,9 @@ static void rx_fifo_read_half_duplex(str - */ - while (rx_fill) { - if (spi->rx_todo < 4) { -- rxbv = (lantiq_ssc_readl(spi, SPI_STAT) & -- SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S; -- data = lantiq_ssc_readl(spi, SPI_RB); -+ rxbv = (lantiq_ssc_readl(spi, LTQ_SPI_STAT) & -+ LTQ_SPI_STAT_RXBV_M) >> LTQ_SPI_STAT_RXBV_S; -+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB); - - shift = (rxbv - 1) * 8; - rx8 = spi->rx; -@@ -578,7 +585,7 @@ static void rx_fifo_read_half_duplex(str - spi->rx++; - } - } else { -- data = lantiq_ssc_readl(spi, SPI_RB); -+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB); - rx32 = (u32 *) spi->rx; - - *rx32++ = data; -@@ -603,7 +610,7 @@ static void rx_request(struct lantiq_ssc - if (rxreq > rxreq_max) - rxreq = rxreq_max; - -- lantiq_ssc_writel(spi, rxreq, SPI_RXREQ); -+ lantiq_ssc_writel(spi, rxreq, LTQ_SPI_RXREQ); - } - - static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) -@@ -642,26 +649,26 @@ completed: - static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) - { - struct lantiq_ssc_spi *spi = data; -- u32 stat = lantiq_ssc_readl(spi, SPI_STAT); -+ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT); - -- if (!(stat & SPI_STAT_ERRORS)) -+ if (!(stat & LTQ_SPI_STAT_ERRORS)) - return IRQ_NONE; - -- if (stat & SPI_STAT_RUE) -+ if (stat & LTQ_SPI_STAT_RUE) - dev_err(spi->dev, "receive underflow error\n"); -- if (stat & SPI_STAT_TUE) -+ if (stat & LTQ_SPI_STAT_TUE) - dev_err(spi->dev, "transmit underflow error\n"); -- if (stat & SPI_STAT_AE) -+ if (stat & LTQ_SPI_STAT_AE) - dev_err(spi->dev, "abort error\n"); -- if (stat & SPI_STAT_RE) -+ if (stat & LTQ_SPI_STAT_RE) - dev_err(spi->dev, "receive overflow error\n"); -- if (stat & SPI_STAT_TE) -+ if (stat & LTQ_SPI_STAT_TE) - dev_err(spi->dev, "transmit overflow error\n"); -- if (stat & SPI_STAT_ME) -+ if (stat & LTQ_SPI_STAT_ME) - dev_err(spi->dev, "mode error\n"); - - /* Clear error flags */ -- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); -+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); - - /* set bad status so it can be retried */ - if (spi->master->cur_msg) -@@ -721,9 +728,9 @@ static void lantiq_ssc_bussy_work(struct - - end = jiffies + msecs_to_jiffies(timeout); - do { -- u32 stat = lantiq_ssc_readl(spi, SPI_STAT); -+ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT); - -- if (!(stat & SPI_STAT_BSY)) { -+ if (!(stat & LTQ_SPI_STAT_BSY)) { - spi_finalize_current_transfer(spi->master); - return; - } -@@ -755,9 +762,9 @@ static void lantiq_ssc_set_cs(struct spi - if (!!(spidev->mode & SPI_CS_HIGH) == enable) - fgpo = (1 << (cs - spi->base_cs)); - else -- fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S)); -+ fgpo = (1 << (cs - spi->base_cs + LTQ_SPI_FGPO_SETOUTN_S)); - -- lantiq_ssc_writel(spi, fgpo, SPI_FPGO); -+ lantiq_ssc_writel(spi, fgpo, LTQ_SPI_FPGO); - } - - static int lantiq_ssc_transfer_one(struct spi_master *master, -@@ -772,13 +779,13 @@ static int lantiq_ssc_transfer_one(struc - } - - static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = { -- .irnen_r = SPI_IRNEN_R_XWAY, -- .irnen_t = SPI_IRNEN_T_XWAY, -+ .irnen_r = LTQ_SPI_IRNEN_R_XWAY, -+ .irnen_t = LTQ_SPI_IRNEN_T_XWAY, - }; - - static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = { -- .irnen_r = SPI_IRNEN_R_XRX, -- .irnen_t = SPI_IRNEN_T_XRX, -+ .irnen_r = LTQ_SPI_IRNEN_R_XRX, -+ .irnen_t = LTQ_SPI_IRNEN_T_XRX, - }; - - static const struct of_device_id lantiq_ssc_match[] = { -@@ -814,21 +821,21 @@ static int lantiq_ssc_probe(struct platf - return -ENXIO; - } - -- rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME); -+ rx_irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME); - if (rx_irq < 0) { -- dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME); -+ dev_err(dev, "failed to get %s\n", LTQ_SPI_RX_IRQ_NAME); - return -ENXIO; - } - -- tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME); -+ tx_irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME); - if (tx_irq < 0) { -- dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME); -+ dev_err(dev, "failed to get %s\n", LTQ_SPI_TX_IRQ_NAME); - return -ENXIO; - } - -- err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME); -+ err_irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME); - if (err_irq < 0) { -- dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME); -+ dev_err(dev, "failed to get %s\n", LTQ_SPI_ERR_IRQ_NAME); - return -ENXIO; - } - -@@ -849,17 +856,17 @@ static int lantiq_ssc_probe(struct platf - } - - err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt, -- 0, SPI_RX_IRQ_NAME, spi); -+ 0, LTQ_SPI_RX_IRQ_NAME, spi); - if (err) - goto err_master_put; - - err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt, -- 0, SPI_TX_IRQ_NAME, spi); -+ 0, LTQ_SPI_TX_IRQ_NAME, spi); - if (err) - goto err_master_put; - - err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt, -- 0, SPI_ERR_IRQ_NAME, spi); -+ 0, LTQ_SPI_ERR_IRQ_NAME, spi); - if (err) - goto err_master_put; - -@@ -916,11 +923,11 @@ static int lantiq_ssc_probe(struct platf - } - INIT_WORK(&spi->work, lantiq_ssc_bussy_work); - -- id = lantiq_ssc_readl(spi, SPI_ID); -- spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S; -- spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S; -- supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S; -- revision = id & SPI_ID_REV_M; -+ id = lantiq_ssc_readl(spi, LTQ_SPI_ID); -+ spi->tx_fifo_size = (id & LTQ_SPI_ID_TXFS_M) >> LTQ_SPI_ID_TXFS_S; -+ spi->rx_fifo_size = (id & LTQ_SPI_ID_RXFS_M) >> LTQ_SPI_ID_RXFS_S; -+ supports_dma = (id & LTQ_SPI_ID_CFG_M) >> LTQ_SPI_ID_CFG_S; -+ revision = id & LTQ_SPI_ID_REV_M; - - lantiq_ssc_hw_init(spi); - -@@ -952,8 +959,8 @@ static int lantiq_ssc_remove(struct plat - { - struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev); - -- lantiq_ssc_writel(spi, 0, SPI_IRNEN); -- lantiq_ssc_writel(spi, 0, SPI_CLC); -+ lantiq_ssc_writel(spi, 0, LTQ_SPI_IRNEN); -+ lantiq_ssc_writel(spi, 0, LTQ_SPI_CLC); - rx_fifo_flush(spi); - tx_fifo_flush(spi); - hw_enter_config_mode(spi); diff --git a/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch index 7b14d9e5a90..c0639e137f8 100644 --- a/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch +++ b/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch @@ -1,6 +1,6 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -2320,6 +2320,12 @@ config MIPS_VPE_LOADER +@@ -2323,6 +2323,12 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. @@ -142,7 +142,7 @@ { --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c -@@ -31,10 +31,14 @@ EXPORT_SYMBOL_GPL(ebu_lock); +@@ -37,10 +37,14 @@ unsigned long physical_memsize = 0L; */ static struct ltq_soc_info soc_info; @@ -159,7 +159,7 @@ { --- a/arch/mips/include/asm/mipsmtregs.h +++ b/arch/mips/include/asm/mipsmtregs.h -@@ -31,6 +31,9 @@ +@@ -32,6 +32,9 @@ #define read_c0_vpeconf1() __read_32bit_c0_register($1, 3) #define write_c0_vpeconf1(val) __write_32bit_c0_register($1, 3, val) @@ -169,7 +169,7 @@ #define read_c0_tcstatus() __read_32bit_c0_register($2, 1) #define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val) -@@ -376,6 +379,8 @@ do { \ +@@ -377,6 +380,8 @@ do { \ #define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val) #define read_vpe_c0_vpeconf1() mftc0(1, 3) #define write_vpe_c0_vpeconf1(val) mttc0(1, 3, val) diff --git a/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch index fd8b7b8923a..304ff4bac8c 100644 --- a/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch +++ b/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch @@ -71,9 +71,9 @@ + }; + const char **type; - if (of_machine_is_compatible("lantiq,falcon") && - (ltq_boot_select() != BS_FLASH)) { -@@ -126,75 +162,89 @@ ltq_mtd_probe(struct platform_device *pd + ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL); + if (!ltq_mtd) +@@ -120,75 +156,89 @@ ltq_mtd_probe(struct platform_device *pd platform_set_drvdata(pdev, ltq_mtd); @@ -141,17 +141,7 @@ - GFP_KERNEL); - if (!ltq_mtd->map) - return -ENOMEM; -+ if (devices_found == 1) { -+ ltq_mtd->cmtd = ltq_mtd->mtd[0]; -+ } else if (devices_found > 1) { -+ /* -+ * We detected multiple devices. Concatenate them together. -+ */ -+ ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev)); -+ if (ltq_mtd->cmtd == NULL) -+ err = -ENXIO; -+ } - +- - if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) - ltq_mtd->map->phys = NO_XIP; - else @@ -176,8 +166,17 @@ - if (!ltq_mtd->mtd) { - dev_err(&pdev->dev, "probing failed\n"); - return -ENXIO; -- } -- ++ if (devices_found == 1) { ++ ltq_mtd->cmtd = ltq_mtd->mtd[0]; ++ } else if (devices_found > 1) { ++ /* ++ * We detected multiple devices. Concatenate them together. ++ */ ++ ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev)); ++ if (ltq_mtd->cmtd == NULL) ++ err = -ENXIO; + } + - ltq_mtd->mtd->dev.parent = &pdev->dev; - mtd_set_of_node(ltq_mtd->mtd, pdev->dev.of_node); - diff --git a/target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch b/target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch deleted file mode 100644 index 234a2527fca..00000000000 --- a/target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch +++ /dev/null @@ -1,152 +0,0 @@ -From 58078a30038b578c26c532545448fe3746648390 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Thu, 29 Dec 2016 21:02:57 +0100 -Subject: [PATCH] MIPS: lantiq: lock DMA register accesses for SMP - -The DMA controller channel and port configuration is changed by -selecting the port or channel in one register and then update the -configuration in other registers. This has to be done in an atomic -operation. Previously only the local interrupts were deactivated which -works for single CPU systems. If the system supports SMP a better -locking is needed, use spinlocks instead. -On more recent SoCs (at least xrx200 and later) there are two memory -regions to change the configuration, there we could use one area for -each CPU and do not have to synchronize between the CPUs and more. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/lantiq/xway/dma.c | 38 ++++++++++++++++++++------------------ - 1 file changed, 20 insertions(+), 18 deletions(-) - ---- a/arch/mips/lantiq/xway/dma.c -+++ b/arch/mips/lantiq/xway/dma.c -@@ -20,6 +20,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -59,16 +60,17 @@ - ltq_dma_membase + (z)) - - static void __iomem *ltq_dma_membase; -+static DEFINE_SPINLOCK(ltq_dma_lock); - - void - ltq_dma_enable_irq(struct ltq_dma_channel *ch) - { - unsigned long flags; - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_enable_irq); - -@@ -77,10 +79,10 @@ ltq_dma_disable_irq(struct ltq_dma_chann - { - unsigned long flags; - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_disable_irq); - -@@ -89,10 +91,10 @@ ltq_dma_ack_irq(struct ltq_dma_channel * - { - unsigned long flags; - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_ack_irq); - -@@ -101,11 +103,11 @@ ltq_dma_open(struct ltq_dma_channel *ch) - { - unsigned long flag; - -- local_irq_save(flag); -+ spin_lock_irqsave(<q_dma_lock, flag); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL); -- ltq_dma_enable_irq(ch); -- local_irq_restore(flag); -+ ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); -+ spin_unlock_irqrestore(<q_dma_lock, flag); - } - EXPORT_SYMBOL_GPL(ltq_dma_open); - -@@ -114,11 +116,11 @@ ltq_dma_close(struct ltq_dma_channel *ch - { - unsigned long flag; - -- local_irq_save(flag); -+ spin_lock_irqsave(<q_dma_lock, flag); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); -- ltq_dma_disable_irq(ch); -- local_irq_restore(flag); -+ ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN); -+ spin_unlock_irqrestore(<q_dma_lock, flag); - } - EXPORT_SYMBOL_GPL(ltq_dma_close); - -@@ -133,7 +135,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch - &ch->phys, GFP_ATOMIC); - memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE); - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32(ch->phys, LTQ_DMA_CDBA); - ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN); -@@ -142,7 +144,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch - ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL); - while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST) - ; -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - - void -@@ -152,11 +154,11 @@ ltq_dma_alloc_tx(struct ltq_dma_channel - - ltq_dma_alloc(ch); - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); - ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); - ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx); - -@@ -167,11 +169,11 @@ ltq_dma_alloc_rx(struct ltq_dma_channel - - ltq_dma_alloc(ch); - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); - ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); - ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx); - diff --git a/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch index e42aaf9c07d..ae8efcfdc02 100644 --- a/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch +++ b/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch @@ -1,6 +1,6 @@ --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -442,6 +442,20 @@ static void clkdev_add_clkout(void) +@@ -424,6 +424,20 @@ static void clkdev_add_clkout(void) } } @@ -21,9 +21,9 @@ /* bring up all register ranges that we need for basic system control */ void __init ltq_soc_init(void) { -@@ -628,4 +642,6 @@ void __init ltq_soc_init(void) - if (of_machine_is_compatible("lantiq,vr9")) - xbar_fpi_burst_disable(); +@@ -589,4 +603,6 @@ void __init ltq_soc_init(void) + clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); + } usb_set_clock(); + + set_phy_clock_source(np_cgu); diff --git a/target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch b/target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch deleted file mode 100644 index 7e0051e6686..00000000000 --- a/target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch +++ /dev/null @@ -1,184 +0,0 @@ ---- a/drivers/hwmon/Makefile -+++ b/drivers/hwmon/Makefile -@@ -109,6 +109,7 @@ obj-$(CONFIG_SENSORS_LTC4222) += ltc4222 - obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o - obj-$(CONFIG_SENSORS_LTC4260) += ltc4260.o - obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o -+obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o - obj-$(CONFIG_SENSORS_MAX1111) += max1111.o - obj-$(CONFIG_SENSORS_MAX16065) += max16065.o - obj-$(CONFIG_SENSORS_MAX1619) += max1619.o ---- a/drivers/hwmon/Kconfig -+++ b/drivers/hwmon/Kconfig -@@ -780,6 +780,14 @@ config SENSORS_LTC4261 - This driver can also be built as a module. If so, the module will - be called ltc4261. - -+config SENSORS_LTQ_CPUTEMP -+ bool "Lantiq CPU temperature sensor" -+ depends on LANTIQ -+ default n -+ help -+ If you say yes here you get support for the temperature -+ sensor inside your CPU. -+ - config SENSORS_MAX1111 - tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" - depends on SPI_MASTER ---- /dev/null -+++ b/drivers/hwmon/ltq-cputemp.c -@@ -0,0 +1,154 @@ -+/* Lantiq CPU Temperatur sensor driver for xrx200 -+ * -+ * Copyright (C) 2016 Florian Eckert -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version -+ * -+ * This program is distributed in the hope that it will be useful -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, see -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+/* gphy1 configuration register contains cpu temperature */ -+#define CGU_GPHY1_CR 0x0040 -+#define CGU_TEMP_PD BIT(19) -+ -+static void ltq_cputemp_enable(void) -+{ -+ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); -+ -+ /* wait a short moment to let the SoC get the first temperatur value */ -+ mdelay(100); -+} -+ -+static void ltq_cputemp_disable(void) -+{ -+ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) & ~CGU_TEMP_PD, CGU_GPHY1_CR); -+} -+ -+static int ltq_cputemp_read(void) -+{ -+ int value; -+ -+ /* get the temperature including one decimal place */ -+ value = (ltq_cgu_r32(CGU_GPHY1_CR) >> 9) & 0x01FF; -+ value = (value << 2 ) + value; -+ -+ /* range -38 to +154 °C, register value zero is -38.0 °C */ -+ value -= 380; -+ -+ return value; -+} -+ -+static ssize_t show_cputemp(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ int value; -+ -+ value = ltq_cputemp_read(); -+ /* scale temp to millidegree */ -+ value = value * 100; -+ -+ return sprintf(buf, "%d\n", value); -+} -+ -+static DEVICE_ATTR(temp1_input, S_IRUGO, show_cputemp, NULL); -+ -+static struct attribute *ltq_cputemp_attrs[] = { -+ &dev_attr_temp1_input.attr, -+ NULL -+}; -+ -+ATTRIBUTE_GROUPS(ltq_cputemp); -+ -+static int ltq_cputemp_probe(struct platform_device *pdev) -+{ -+ int value = 0; -+ int ret; -+ struct device *hwmon_dev; -+ -+ /* available on vr9 v1.2 SoCs only */ -+ if (ltq_soc_type() != SOC_TYPE_VR9_2) -+ return -ENODEV; -+ -+ hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, -+ "CPU0", -+ NULL, -+ ltq_cputemp_groups); -+ -+ if (IS_ERR(hwmon_dev)) { -+ dev_err(&pdev->dev, "Failed to register as hwmon device"); -+ ret = PTR_ERR(hwmon_dev); -+ goto error_hwmon; -+ } -+ -+ ltq_cputemp_enable(); -+ value = ltq_cputemp_read(); -+ dev_info(&pdev->dev, "Current CPU die temperature: %d.%d °C", value / 10, value % 10); -+ -+ return 0; -+ -+error_hwmon: -+ return ret; -+} -+ -+static int ltq_cputemp_release(struct platform_device *pdev) -+{ -+ hwmon_device_unregister(&pdev->dev); -+ ltq_cputemp_disable(); -+ return 0; -+} -+ -+const struct of_device_id ltq_cputemp_match[] = { -+ { .compatible = "lantiq,cputemp" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ltq_cputemp_match); -+ -+static struct platform_driver ltq_cputemp_driver = { -+ .probe = ltq_cputemp_probe, -+ .remove = ltq_cputemp_release, -+ .driver = { -+ .name = "ltq-cputemp", -+ .owner = THIS_MODULE, -+ .of_match_table = ltq_cputemp_match, -+ }, -+}; -+ -+int __init init_ltq_cputemp(void) -+{ -+ int ret; -+ -+ ret = platform_driver_register(<q_cputemp_driver); -+ return ret; -+} -+ -+void clean_ltq_cputemp(void) -+{ -+ platform_driver_unregister(<q_cputemp_driver); -+ return; -+} -+ -+module_init(init_ltq_cputemp); -+module_exit(clean_ltq_cputemp); -+ -+MODULE_AUTHOR("Florian Eckert "); -+ -+MODULE_DESCRIPTION("Lantiq Temperature Sensor"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/xrx200/config-4.14 b/target/linux/lantiq/xrx200/config-4.14 index 73ccaf34ab1..7b15d4283bb 100644 --- a/target/linux/lantiq/xrx200/config-4.14 +++ b/target/linux/lantiq/xrx200/config-4.14 @@ -6,6 +6,7 @@ CONFIG_CPU_MIPSR2_IRQ_EI=y CONFIG_CPU_MIPSR2_IRQ_VI=y CONFIG_CPU_RMAP=y CONFIG_CRC16=y +CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_DEFLATE=y @@ -13,6 +14,8 @@ CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_NULL2=y +CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin" +CONFIG_EXTRA_FIRMWARE_DIR="firmware" CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_HWMON=y CONFIG_ICPLUS_PHY=y @@ -57,10 +60,14 @@ CONFIG_PCI=y CONFIG_PCIE_LANTIQ=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LANTIQ=y -CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_SUPPLY=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_RCU_NEED_SEGCBLIST=y CONFIG_RCU_STALL_COMMON=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_RFS_ACCEL=y CONFIG_RPS=y CONFIG_RTL8306_PHY=y @@ -75,6 +82,7 @@ CONFIG_SYNC_R4K=y CONFIG_SYS_SUPPORTS_SCHED_SMT=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_UBIFS_FS_LZO=y @@ -83,7 +91,6 @@ CONFIG_USB=y CONFIG_USB_COMMON=y # CONFIG_USB_EHCI_HCD is not set CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set CONFIG_XPS=y CONFIG_XRX200_PHY_FW=y CONFIG_ZLIB_DEFLATE=y diff --git a/target/linux/lantiq/xway/config-4.14 b/target/linux/lantiq/xway/config-4.14 index 79064ccc02e..5e18a4deefa 100644 --- a/target/linux/lantiq/xway/config-4.14 +++ b/target/linux/lantiq/xway/config-4.14 @@ -2,6 +2,7 @@ CONFIG_ADM6996_PHY=y CONFIG_AR8216_PHY=y CONFIG_BLK_MQ_PCI=y CONFIG_CRC16=y +CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y CONFIG_FIRMWARE_IN_KERNEL=y @@ -31,6 +32,8 @@ CONFIG_PCI=y # CONFIG_PCIE_LANTIQ is not set CONFIG_PCI_DOMAINS=y CONFIG_PCI_LANTIQ=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_RTL8306_PHY=y CONFIG_RTL8366S_PHY=y CONFIG_RTL8367B_PHY=y @@ -43,6 +46,5 @@ CONFIG_USB=y CONFIG_USB_COMMON=y # CONFIG_USB_EHCI_HCD is not set CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/lantiq/xway_legacy/config-4.14 b/target/linux/lantiq/xway_legacy/config-4.14 index c8aa6317875..feb82c5fcfb 100644 --- a/target/linux/lantiq/xway_legacy/config-4.14 +++ b/target/linux/lantiq/xway_legacy/config-4.14 @@ -2,6 +2,7 @@ CONFIG_ADM6996_PHY=y CONFIG_AR8216_PHY=y CONFIG_BLK_MQ_PCI=y CONFIG_CRC16=y +CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y CONFIG_FIRMWARE_IN_KERNEL=y @@ -24,6 +25,8 @@ CONFIG_PCI=y # CONFIG_PCIE_LANTIQ is not set CONFIG_PCI_DOMAINS=y CONFIG_PCI_LANTIQ=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_RTL8306_PHY=y CONFIG_RTL8366S_PHY=y CONFIG_RTL8367B_PHY=y @@ -32,6 +35,5 @@ CONFIG_USB=y CONFIG_USB_COMMON=y # CONFIG_USB_EHCI_HCD is not set CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y