ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 01:59:02 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
1abaf051d2
openwrt/target/linux/bmips/image/bcm6328.mk

119 lines
3.0 KiB
Makefile
Raw Normal View History

bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
bmips: add support for Arcadyan AR7516 The Arcadyan AR7516, AKA Orange Bright Box or EE Bright Box 1, is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. It comes with a horizontal stand black shiny casing. Newer Bright Box 1 model stands vertically, and comes with a totally different board inside, not compatible with this firmware. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 8 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43227 802.11bgn (onboard) - USB: 1x 2.0 - ADSL: yes, unsupported - Buttons: 2x - LEDs: 9x, power LED is hardware controlled - UART: yes Installation in two steps, new CFE bootloader and firmware: Install new CFE: 1. Power off the router and press the RESET button 2. Power on the router and wait some seconds 3. Release the RESET button 3. Browse to http://192.168.1.1, this web interface will offer both firmware (“Software”) upgrade and bootloader upgrade; be sure to use the bootloader section of the upload form. 4. Upload the new CFE (availabe at the wiki page) 5. Wait about a minute for flashing to finish and reboot into the new bootloader. Install OpenWrt via new CFE web UI: 1. After installing the new CFE, visit http://192.168.1.1 2. Upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-21 21:14:02 +00:00
define Device/arcadyan_ar7516
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := AR7516
CHIP_ID := 6328
CFE_BOARD_ID := AR7516AAW
FLASH_MB := 8
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43227-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += arcadyan_ar7516
bmips: add support for Comtrend AR-5381u The Comtrend AR-5381u is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB DDR - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43225 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-11 16:44:36 +00:00
define Device/comtrend_ar-5381u
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := AR-5381u
CHIP_ID := 6328
CFE_BOARD_ID := 96328A-1241N
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43225-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += comtrend_ar-5381u
bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
define Device/comtrend_ar-5387un
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := AR-5387un
CHIP_ID := 6328
CFE_BOARD_ID := 96328A-1441N1
FLASH_MB := 16
bmips: switch to generic bcma/ssb fallback SPROM Stop using bmips b43-sprom fixups and switch to generic bcma/ssb fallback SPROMs. This way we don't need to include the b43-sprom fixups on devices without Broadcom wireless. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-20 08:05:52 +00:00
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43225-sprom \
bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
kmod-leds-bcm6328
endef
TARGET_DEVICES += comtrend_ar-5387un
bmips: add support for Sercomm AD1018 The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-12 17:51:22 +00:00
bmips: bcm6328: add support for D-Link DSL-2750B rev B1 The D-Link DSL-2750B rev B1 (AW4339U) is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. This ports the device from old target bcm63xx/generic to bmips/bcm6328. The hardware is the same of D-Link DSL-2740B rev F1 and DSL-2741B rev F1, plus a usb2 port. Hardware: - SoC: Broadcom BCM63281 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (Nanya NT5TU32M16DG) - Flash: 8 MB NOR (Macronix MX25L6406ENI-12G) - Ethernet LAN: 4x 100Mbit (Broadcom BCM63281) - Wifi 2.4 GHz: 802.11bgn (Atheros AR9287) - USB: 1x 2.0 - Buttons: 3x - LEDs: 10x - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Samuele Longhi <agave@dracaena.it>
2024-08-16 10:38:42 +00:00
define Device/dlink_dsl-2750b-b1
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DSL-2750B
DEVICE_VARIANT := B1
DEVICE_ALT0_VENDOR := D-Link
DEVICE_ALT0_MODEL := DSL-2740B
DEVICE_ALT0_VARIANT := F1
DEVICE_ALT1_VENDOR := D-Link
DEVICE_ALT1_MODEL := DSL-2741B
DEVICE_ALT1_VARIANT := F1
CFE_BOARD_ID := AW4339U
CHIP_ID := 6328
IMAGES := cfe-EU.bin cfe-AU.bin
IMAGE/cfe-AU.bin := cfe-bin --signature2 "4.06.01.AUF1" --pad 4
IMAGE/cfe-EU.bin := cfe-bin --signature2 "4.06.01.EUF1" --pad 4
DEVICE_PACKAGES += $(USB2_PACKAGES) $(ATH9K_PACKAGES) \
kmod-leds-gpio kmod-leds-bcm6328
endef
TARGET_DEVICES += dlink_dsl-2750b-b1
bmips: bcm6328: add Innacomm W3400V6 Innacomm W3400V6 is an xDSL B/G wireless router based on Broadcom BCM6328 SoC. SoC: Broadcom BCM6328 CPU: BMIPS4350 V8.0, 320 MHz, 1 core Flash: SPI-NOR 8MB, MX25L6406E RAM: 64 MB Ethernet: 4x 10/100 Mbps Switch: Integrated Wireless: 802.11b/g, BCM4312 LEDs/Buttons: 9x / 2x Flash instruction, web UI: 1. Set a static IP on your computer compatible with 192.168.1.1, i.e 192.168.1.100. 2. Connect the ethernet cable from your computer to the router. 3. Make sure the router is powered off. 4. Press the reset button, don't release it yet! 5. While pressing reset, power on the router. 6. Wait 10 seconds or more. Note: The power LED is red at first then turns to solid green when ready. 7. Release the reset button. 8. Browse to 192.168.1.1 9. Select .bin file. 10. Upgrade the image. 11. Wait for it to reboot. Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com> [Fix cfe nvmem-layout and pinctrl_leds indentation] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-08-09 05:13:57 +00:00
define Device/innacomm_w3400v6
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Innacomm
DEVICE_MODEL := W3400V6
CHIP_ID := 6328
CFE_BOARD_ID := 96328ang
FLASH_MB := 8
DEVICE_PACKAGES += $(B43_PACKAGES) \
broadcom-4318-sprom kmod-leds-bcm6328
endef
TARGET_DEVICES += innacomm_w3400v6
bmips: Add Inteno XG6846 target This adds a device tree and build options for the XG6846 switch/router to the BMIPS target. Hardware: - SoC: Broadcom BCM6328 - CPU: BMIPS4350 V7.5 - RAM: 64 MB DDR - NOR Flash: 16 MB parallel (CFE and OS) - Ethernet LAN: 4x 1Gbit - Ethernet WAN: 2x 1Gbit, fiber and TP - Buttons: reset - LEDs: 7 or 8, power and USB LEDs are GPIO-based, the LAN LEDs are controlled by the Marvell DSA Switch. - USB: on some versions - UART: yes The device ODM (original device manufacturer) is XAVi http://www.xavi.com.tw/ It is possible to boot the initramfs version openwrt-bmips-bcm6328-inteno_xg6846-initramfs.elf from CFE by interrupting the boot on the UART console and downloading it from a TFTP server e.g.: CFE> r 192.168.1.2:openwrt-bmips-bcm6328-inteno_xg6846-initramfs.elf Installation to target flash is not possible using CFE because the image becomes too big for the CFE version found in these devices. A separate U-Boot two-stage solution exists for actually booting the device. This device is called a "managed ethernet switch" by the vendor and "media converter" or "fiber modem" by some of the ISPs using it: the main purpose is to convert fiber connections to ethernet, most devices just act as switches bridging the fiber SFP to ethernet TP. The device has a Marvell MV88E6352 DSA switch managed by a BCM6328 BMIPS SoC. This port makes it possible to use the XG6846 to grab an IP number from the fiber connection and use all four LAN connections out, turning it into a proper router. This support is based mostly on the observations by the people on the forum thread "Help with Inteno XG6846" where users NPeca75, mrhaav, systemcrash and csom helped out to reverse engineer the device. Then I made it work on the BMIPS target, figured out the two-level switch hierarchy and settings. Link: https://forum.openwrt.org/t/help-with-inteno-xg6846/68276/14 Signed-off-by: Paul Donald <newtwen+github@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-30 20:22:17 +00:00
define Device/inteno_xg6846
bmips: Build U-Boot into the XG6846 target It appears that the CFE boot loader found in the XG6846 cannot load kernels over a certain size, and the old relocate hack is not working. What to do? We can build a small U-Boot into the image, make CFE boot that, place the kernel immediately after U-Boot, and use U-Boot to boot the system instead. The compiled u-boot.bin becomes around ~300KB and with LZMA compression it will swiftly fit into 128KB, so we use two 64KB erase blocks right after the CFE to store an imagetag:ed U-Boot. Reviewed-by: Paul Donald <newtwen+github@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-08-05 07:02:20 +00:00
$(Device/bcm63xx-cfe-uboot)
bmips: Add Inteno XG6846 target This adds a device tree and build options for the XG6846 switch/router to the BMIPS target. Hardware: - SoC: Broadcom BCM6328 - CPU: BMIPS4350 V7.5 - RAM: 64 MB DDR - NOR Flash: 16 MB parallel (CFE and OS) - Ethernet LAN: 4x 1Gbit - Ethernet WAN: 2x 1Gbit, fiber and TP - Buttons: reset - LEDs: 7 or 8, power and USB LEDs are GPIO-based, the LAN LEDs are controlled by the Marvell DSA Switch. - USB: on some versions - UART: yes The device ODM (original device manufacturer) is XAVi http://www.xavi.com.tw/ It is possible to boot the initramfs version openwrt-bmips-bcm6328-inteno_xg6846-initramfs.elf from CFE by interrupting the boot on the UART console and downloading it from a TFTP server e.g.: CFE> r 192.168.1.2:openwrt-bmips-bcm6328-inteno_xg6846-initramfs.elf Installation to target flash is not possible using CFE because the image becomes too big for the CFE version found in these devices. A separate U-Boot two-stage solution exists for actually booting the device. This device is called a "managed ethernet switch" by the vendor and "media converter" or "fiber modem" by some of the ISPs using it: the main purpose is to convert fiber connections to ethernet, most devices just act as switches bridging the fiber SFP to ethernet TP. The device has a Marvell MV88E6352 DSA switch managed by a BCM6328 BMIPS SoC. This port makes it possible to use the XG6846 to grab an IP number from the fiber connection and use all four LAN connections out, turning it into a proper router. This support is based mostly on the observations by the people on the forum thread "Help with Inteno XG6846" where users NPeca75, mrhaav, systemcrash and csom helped out to reverse engineer the device. Then I made it work on the BMIPS target, figured out the two-level switch hierarchy and settings. Link: https://forum.openwrt.org/t/help-with-inteno-xg6846/68276/14 Signed-off-by: Paul Donald <newtwen+github@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-30 20:22:17 +00:00
DEVICE_VENDOR := Inteno
DEVICE_MODEL := XG6846
CHIP_ID := 6328
CFE_BOARD_ID := 96328avng
FLASH_MB := 16
DEVICE_PACKAGES := $(USB2_PACKAGES) \
kmod-i2c-core kmod-i2c-gpio \
kmod-leds-bcm6328 kmod-dsa-mv88e6xxx \
kmod-sfp
endef
TARGET_DEVICES += inteno_xg6846
bmips: add support for NuCom R5010UNv2 The NuCom R5010UNv2 is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43217 802.11bgn (onboard) - USB: 1x 2.0 - Buttons: 2x - ADSL: yes, unsupported - LEDs: 7x - UART: yes Installation via CFE web UI: 1. Power off the router and press the RESET button 2. Power on the router and wait 12 or more seconds 3. Release the RESET button 4. Browse to http://192.168.1.1 and upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-18 19:34:59 +00:00
define Device/nucom_r5010unv2
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := NuCom
DEVICE_MODEL := R5010UNv2
CHIP_ID := 6328
CFE_BOARD_ID := 96328ang
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43217-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += nucom_r5010unv2
bmips: add support for Sercomm AD1018 The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-12 17:51:22 +00:00
define Device/sercomm_ad1018
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := AD1018
CHIP_ID := 6328
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43217-sprom \
kmod-leds-bcm6328
SERCOMM_FSVER := 1001
SERCOMM_HWVER := 1415153
SERCOMM_SWVER := 3013
endef
TARGET_DEVICES += sercomm_ad1018
Reference in New Issue Copy Permalink