mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-20 17:32:57 +00:00
bmips: add support for Sercomm AD1018
The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This commit is contained in:
Álvaro Fernández Rojas
parent
434434ca47
commit
38ebb2eafd
16
target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds
Normal file
16
target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds
Normal file
@ -0,0 +1,16 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
sercomm,ad1018)
|
||||
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@ -10,6 +10,10 @@ comtrend,ar-5387un)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
|
||||
;;
|
||||
sercomm,ad1018)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 fibre"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
@ -9,6 +9,9 @@ platform_check_image() {
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
sercomm,ad1018)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
|
||||
312
target/linux/bmips/dts/bcm6328-sercomm-ad1018.dts
Normal file
312
target/linux/bmips/dts/bcm6328-sercomm-ad1018.dts
Normal file
@ -0,0 +1,312 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6328.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sercomm AD1018";
|
||||
compatible = "sercomm,ad1018", "brcm,bcm6328";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_green;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "wlan";
|
||||
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WLAN>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
bcm432217-sprom {
|
||||
compatible = "brcm,bcma-sprom";
|
||||
|
||||
pci-bus = <1>;
|
||||
pci-dev = <0>;
|
||||
|
||||
nvmem-cells = <&macaddr_cferom_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
|
||||
brcm,sprom = "brcm/bcm43217-sprom.bin";
|
||||
brcm,sprom-fixups = <6 0x1c00>,
|
||||
<65 0x1256>,
|
||||
<96 0x2046>,
|
||||
<97 0xfe69>,
|
||||
<98 0x1726>,
|
||||
<99 0xfa5c>,
|
||||
<112 0x2046>,
|
||||
<113 0xfea8>,
|
||||
<114 0x1978>,
|
||||
<115 0xfa26>,
|
||||
<161 0x2222>,
|
||||
<169 0x2222>,
|
||||
<171 0x2222>,
|
||||
<173 0x2222>,
|
||||
<174 0x4444>,
|
||||
<175 0x2222>,
|
||||
<176 0x4444>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_cferom_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&leds {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
|
||||
&pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
|
||||
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
|
||||
|
||||
brcm,serial-leds;
|
||||
brcm,serial-shift-inv;
|
||||
brcm,serial-dat-low;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
active-low;
|
||||
label = "red:internet";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
active-low;
|
||||
label = "green:internet";
|
||||
};
|
||||
|
||||
led_power_green: led@8 {
|
||||
reg = <8>;
|
||||
active-low;
|
||||
label = "green:power";
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led@10 {
|
||||
reg = <10>;
|
||||
active-low;
|
||||
label = "green:adsl";
|
||||
};
|
||||
|
||||
led@11 {
|
||||
reg = <11>;
|
||||
active-low;
|
||||
label = "red:adsl";
|
||||
};
|
||||
|
||||
led@12 {
|
||||
reg = <12>;
|
||||
active-low;
|
||||
label = "green:phone";
|
||||
};
|
||||
|
||||
led@13 {
|
||||
reg = <13>;
|
||||
active-low;
|
||||
label = "green:wps";
|
||||
};
|
||||
|
||||
led@14 {
|
||||
reg = <14>;
|
||||
active-low;
|
||||
label = "green:wifi";
|
||||
};
|
||||
|
||||
led@15 {
|
||||
reg = <15>;
|
||||
active-low;
|
||||
label = "green:usb";
|
||||
};
|
||||
|
||||
led@17 {
|
||||
/* EPHY0 Spd */
|
||||
reg = <17>;
|
||||
brcm,hardware-controlled;
|
||||
};
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl_leds: leds {
|
||||
function = "led";
|
||||
pins = "gpio0", "gpio1";
|
||||
};
|
||||
};
|
||||
|
||||
&nflash {
|
||||
status = "okay";
|
||||
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
reg = <0>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-ecc-strength = <15>;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cferom: partition@0 {
|
||||
label = "cferom";
|
||||
reg = <0x0000000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "mmap";
|
||||
reg = <0x0020000 0x00a0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "cferam1";
|
||||
reg = <0x00c0000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "cferam2";
|
||||
reg = <0x0200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@340000 {
|
||||
label = "serial";
|
||||
reg = <0x0340000 0x00a0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3e0000 {
|
||||
label = "protect";
|
||||
reg = <0x03e0000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6920000 {
|
||||
label = "bootflag1";
|
||||
reg = <0x6920000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6a60000 {
|
||||
label = "bootflag2";
|
||||
reg = <0x6a60000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@520000 {
|
||||
compatible = "sercomm,wfi";
|
||||
label = "wfi";
|
||||
reg = <0x0520000 0x6400000>;
|
||||
};
|
||||
|
||||
partition@6ba0000 {
|
||||
label = "xml_cfg";
|
||||
reg = <0x6ba0000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6e20000 {
|
||||
label = "app_dat";
|
||||
reg = <0x6e20000 0x0280000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "fibre";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan3";
|
||||
|
||||
phy-handle = <&phy2>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
|
||||
phy-handle = <&phy3>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
|
||||
phy-handle = <&phy4>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cferom {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_cferom_6a0: macaddr@6a0 {
|
||||
reg = <0x6a0 0x6>;
|
||||
};
|
||||
};
|
||||
@ -25,3 +25,21 @@ define Device/comtrend_ar-5387un
|
||||
kmod-leds-bcm6328
|
||||
endef
|
||||
TARGET_DEVICES += comtrend_ar-5387un
|
||||
|
||||
define Device/sercomm_ad1018
|
||||
$(Device/sercomm-nand)
|
||||
DEVICE_VENDOR := Sercomm
|
||||
DEVICE_MODEL := AD1018
|
||||
CHIP_ID := 6328
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
SUBPAGESIZE := 512
|
||||
VID_HDR_OFFSET := 2048
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
||||
$(B43_PACKAGES) broadcom-43217-sprom \
|
||||
kmod-leds-bcm6328
|
||||
SERCOMM_FSVER := 1001
|
||||
SERCOMM_HWVER := 1415153
|
||||
SERCOMM_SWVER := 3013
|
||||
endef
|
||||
TARGET_DEVICES += sercomm_ad1018
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user