Xianjun Jiao b60e485eb5 Fix the possible wrong last_auto_fpga_lbt_th saving: ...

1. Remove the last_auto_fpga_lbt_th saving from sdrctl set reg command. Otherwise, repeated sdrctl set reg will save wrong value into last_auto_fpga_lbt_th
2. The last_auto_fpga_lbt_th is only set in ad9361_rf_set_channel, which is called at least once by Linux after NIC is up

2021-10-04 09:59:43 +02:00

..

ad9361

udpate ad9361 driver related stuffs:

2021-05-05 16:44:39 +02:00

openofdm_rx

turn on soft decoding by default in openofdm_rx.c driver

2021-04-05 21:41:31 +02:00

openofdm_tx

Update openofdm_tx.c

2021-02-03 15:38:47 +01:00

rx_intf

Fix various typos

2021-02-04 20:41:51 +01:00

side_ch

Update side_ch.h

2021-02-03 15:42:17 +01:00

tx_intf

CSI fuzzer feature -- document to be finished

2021-05-13 17:45:39 +02:00

xilinx_dma

minor update on xilinx dma driver related stuffs

2021-05-05 16:46:28 +02:00

xpu

add ack disable register in xpu in case ack needs to be disabled in monitor mode

2021-04-05 21:51:47 +02:00

hw_def.h

CSI fuzzer feature -- document to be finished

2021-05-13 17:45:39 +02:00

make_all.sh

udpate ad9361 driver related stuffs:

2021-05-05 16:44:39 +02:00

Makefile

prepare upgrade

2020-04-27 09:37:04 +02:00

sdr.c

Fix the possible wrong last_auto_fpga_lbt_th saving:

2021-10-04 09:59:43 +02:00

sdr.h

Use drv_xpu register 0 for LBT threshold setting. 0 will enable FPGA threshold auto setting by ad9361_rf_set_channel() in sdr.c. Other value will set static threshold (that value) to FPGA

2021-09-28 21:52:31 +02:00