Xianjun Jiao a097294415 Change the initial sensitivity th from -95 to -85: ... -85 is a good tradeoff between sensitivity and false alarm -95 will result in lots of non necessary decoding action (false alarm), and sometimes it leads to abnormal receiver state (stuck, etc) -95 should be set manually while doing conductive test with wifi tester		2023-02-03 16:27:51 +01:00
..
openofdm_rx	Add driver support for euqalizer monitor:	2023-02-03 16:26:58 +01:00
openofdm_tx	Update openofdm_tx.c	2021-02-03 15:38:47 +01:00
rx_intf	Remove the reg 3 init in rx_intf.c:	2022-05-13 16:48:30 +02:00
side_ch	Adapt the side channel support for kuiper	2023-01-17 14:48:23 +01:00
tx_intf	Remove unnecessary reg code in tx_intf.c	2023-01-17 13:49:50 +01:00
xilinx_dma	Scripts are adapted for SW HW decouple	2021-10-20 22:50:30 +02:00
xpu	Refactor initial all open slice setup in xpu.c	2023-01-17 13:48:08 +01:00
hw_def.h	Change the initial sensitivity th from -95 to -85:	2023-02-03 16:27:51 +01:00
make_all.sh	Add side_ch driver build into make_all.sh	2023-01-26 17:05:59 +01:00
Makefile	Necessary change for scripts of driver building	2023-01-17 14:01:48 +01:00
sdr.c	Necessary sdr.c change for ADI kuiper release	2023-01-17 14:01:04 +01:00
sdr.h	Format sdr.h	2023-01-17 13:31:10 +01:00
sdrctl_intf.c	Easier way to set arbitrary trx frequency via register rf 1 and 5:	2022-03-30 11:36:36 +02:00
sysfs_intf.c	Example of how to add debug channel via sysfs and access it via script --> driver	2022-03-29 15:18:55 +02:00