the issue of Let openwifi work at arbitrary frequency: ./sdrctl dev sdr0 set reg rf 1/5 NMPQ
the wpa_supplicant scanning does scan those not allowed channel (originally reported by our driver capabilities), but hostpad already actually uses a not allowed channel (by sdrctl) while beacon still indicates an allowed channel (hostapd rejects to run on not allowed channel). So, after wpa_supplicant discovers the beacon on a not allowed channel while the beacon contains an allowed channel, it gets confused
Create helper function ad9361_tx_calibration() and openwifi_rf_rx_update_after_tuning() for frequency tuning. No matter it is from Linux request or rf register 1 (Tx freq override MHz) and 5 (Rx freq override MHz)
- Manually issue Tx Quadrature calibration if frequency change is more than 100MHz
- Disable FPGA SPI module before calibration
- Add xpu reg 13 to disable control manually
By default the TID is disabled in FPGA, because we currently try to TX and RX traffic for all TIDs. So, the TID related operations in sdr.c are removed.
1. The issue only happens at zcu102 side, when it is tested as AP together with zedboard
2. The issue does not happen when zcu102 is client and zedboard is AP
3. The issue (most likely) does not happen in places other than iGent (like Pablo home)
4. Sometimes it does happen at my home when I test zcu102 as AP together with COTS WiFi
5. Indeed seems like the environment related. Guess some quick small packets in the environment quickly flush/round-up/mess-up the rx dma cyclic buffer, and the rx interrupt internal static variable target_buf_idx_old loses track of the background automatic rx dma cyclic buffer
6. The fix is for all board types (zcu102, zedboard, 7035, etc)
7. The driver compiling make_all.sh script generates USE_NEW_RX_INTERRUPT macro to pre_def.h to enable the new code (while keeping the old code). You can use the script as before.
8. The logic of the fix is that exhaustive search all the rx dma cyclic buffer in rx interrupt to get packet to Linux in the first place.
1. add git revision software register 7 to DRV_XPU module (not FPGA XPU module)
2. fix the print of hdr->seq_ctrl in sdr.c
3. add ht_flag display to sdr.c
4. remove the sysid from devicetree because new we have our own git revision read back solution in FPGA (XPU register 63) and driver (the sotware register 7 of drv_xpu)
5. add sudo to update_sdcard.sh to make the image generation without SD card in the test-bed easier
