gui-init: make sure that reseal_tpm_disk_decryption_key happens only on successful TOTP/HOTP sealing, reusing cached TPM Owner password
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Add comments after reboot/poweroff to clarify what they do. These
commands are here partly for discoverability by users who might not
know what to do in a recovery shell, so clarifying their purpose helps
those users figure out what to do.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Enabling DEBUG/TRACE options from board config vs from configuration menu is different.
When enabled in board config, /etc/config is from ROM, and sourced early and make TRACE/DEBUG calls appear early.
If added through configuration menu, those are /etc/config.user overrides extracted from CBFS and then sourced after combine_configs call
If for whatever reason early DEBUG is needed on a platform, enabling in board config is needed.
For runtime debugging, enabling Debug output from configuration menu is enough
As on master otherwise with --disable-asm:
config.status: executing gcrypt-conf commands
Libgcrypt v1.10.1 has been configured as follows:
Platform: GNU/Linux (x86_64-pc-linux-musl)
Hardware detection module: none
Enabled cipher algorithms: arcfour blowfish cast5 des aes twofish
serpent rfc2268 seed camellia idea salsa20
gost28147 chacha20 sm4
Enabled digest algorithms: crc gostr3411-94 md4 md5 rmd160 sha1
sha256 sha512 sha3 tiger whirlpool stribog
blake2 sm3
Enabled kdf algorithms: s2k pkdf2 scrypt
Enabled pubkey algorithms: dsa elgamal rsa ecc
Random number generator: default
Try using jitter entropy: yes
Using linux capabilities: no
FIPS module version:
Try using Padlock crypto: n/a
Try using AES-NI crypto: n/a
Try using Intel SHAEXT: n/a
Try using Intel PCLMUL: n/a
Try using Intel SSE4.1: n/a
Try using DRNG (RDRAND): n/a
Try using Intel AVX: n/a
Try using Intel AVX2: n/a
Try using ARM NEON: n/a
Try using ARMv8 crypto: n/a
Try using PPC crypto: n/a
By disabling --disable-asm in libgcrypt 1.10.1:
config.status: executing gcrypt-conf commands
Libgcrypt v1.10.1 has been configured as follows:
Platform: GNU/Linux (x86_64-pc-linux-musl)
Hardware detection module: libgcrypt_la-hwf-x86
Enabled cipher algorithms: arcfour blowfish cast5 des aes twofish
serpent rfc2268 seed camellia idea salsa20
gost28147 chacha20 sm4
Enabled digest algorithms: crc gostr3411-94 md4 md5 rmd160 sha1
sha256 sha512 sha3 tiger whirlpool stribog
blake2 sm3
Enabled kdf algorithms: s2k pkdf2 scrypt
Enabled pubkey algorithms: dsa elgamal rsa ecc
Random number generator: default
Enabled digest algorithms: crc gostr3411-94 md4 md5 rmd160 sha1
sha256 sha512 sha3 tiger whirlpool stribog
blake2 sm3
Enabled kdf algorithms: s2k pkdf2 scrypt
Enabled pubkey algorithms: dsa elgamal rsa ecc
Random number generator: default
Try using jitter entropy: yes
Using linux capabilities: no
FIPS module version:
Try using Padlock crypto: yes
Try using AES-NI crypto: yes
Try using Intel SHAEXT: yes
Try using Intel PCLMUL: yes
Try using Intel SSE4.1: yes
Try using DRNG (RDRAND): yes
Try using Intel AVX: yes
Try using Intel AVX2: yes
Try using ARM NEON: n/a
Try using ARMv8 crypto: n/a
Try using PPC crypto: n/a
To support PPC crypto, it seems we will need yasm.
To support linux capabilities, libcap would be required as well later on. :/ another point for rng-tools (which also depends on libcap-ng)
Squash of #1502 + moving logo/bootsplash files under branding/Heads
- Move logos and bootsplashes from blobs to branding/Heads/
- Makefile: add support for BRAND_DIR which depends on BRAND_NAME which defaults to Heads if no branding
- Boards coreboot configs: change bootsplash directory to depend on BRAND_DIR (instead of BLOBS_DIR) in bootsplash enabled configs
- Branding/Heads/bootsplash-1024x768.jpg points to branding/Heads/d-wid-ThePlexus_coreboot-linuxboot-heads_background-plain_DonateQrCode.jpg
- xcf file deleted. Original still under #1502 to reuse for modification without recompressing (blobs/heads.xcf)
- CREDITS file created to point to original authors, remixers (Open for details)
- Thanks to: @d-wid for remixing Bing's AI generated Janus logo, @ThePlexus for Qubes Box concept and @ThrillerAtPlay for its matrix background
Some device firmware, such as the graphics microcontroller, is needed
during the initrd - i915 is often loaded in the initrd, and this is the
only chance to load GuC firmware.
Device firmware must still be available after the real root is mounted
too, so update the custom firmware path in the kernel when the firmware
is moved to /run.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Add Librem 11 board.
Librem 11 uses coreboot graphics init, which is done with FSP GOP.
Set a custom keymap for the volume/power keys. Configure the volume
keys as up/down arrows (for navigation in fbwhiptail, and for shell
history in the Linux console). Configure the power key as Enter.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Allow boards to optionally include loadkeys to set a custom keymap.
showkey and dumpkeys (normally only needed for development) can also be
optionally included.
Remove *.map from .gitignore; this was probably intended for build
artifacts that are now excluded via the build/ directory.
Add reboot and poweroff to shell history, which is useful for devices
lacking full hardware keyboards to escape the recovery shell with just
"up" and "enter".
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Move firmware binaries into board subdirectories, so boards can have
different firmware binaries.
Remove *.bin from .gitignore. This was probably meant for build
artifacts, which are excluded via build/ now.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Update to 1.3. Includes navigation improvements for devices with just
up/down/Enter keys, for Librem 11.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
