- intel igpu related - remove i915drmfb hacks and use simplefb and libgfxinit enabled fb
- coreboot 4.19: add patch to fix https://ticket.coreboot.org/issues/500. fbwhiptail still tears screen if in native 1366x769 though
- coreboot 4.19: add patch to enable linux tampoline handle coreboot framebuffer (merged https://review.coreboot.org/c/coreboot/+/76431)
- coreboot 4.19: add patch to enable coreboot to apply jpeg voodoo to create bootsplash.jpeg injected in cbfs at build time + CircleCI apt imagemagick
- (Thanks Nico Huber @icon again for above patches!)
- coreboot configs: adapt VESAFB/LIBGFXINIT to use maximum fb height/width
- coreboot configs for iGPU only: CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH to native size
- coreboot configs for dGPU based on Optional VBIOS injected: VESAFB set to 1280x1024 (maximum possible).
Details:
coreboot configs: remove CONFIG_LINUX_COMMAND_LINE="drm_kms_helper.drm_leak_fbdev_smem=1 i915.enable_fbc=0"
- Those were needed to expose i915drmfb driver prior of efifb working.
Nothing else shares the 4.20.1 toolchain yet, and upcoming forks are
based on older releases. We'll share it when other boards update to
4.20.1.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Based on feedback, 1440p displays can benefit from 2x console as well.
Err toward a font too large rather than too small and lower the
threshold to 1350, which is the threshold fbwhiptail uses for 1.5x.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Include kbd so the console font can be enlarged based on the display
resolution.
Don't force 1080p on the eDP output in Heads.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
fbwhiptail scales its UI based on the display size. FBWHIPTAIL_SCALE
can set a specific scale factor for testing.
fbwhiptail no longer looks for a 1080p mode when the default mode is
2160p.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Build kbd and ship setfont if enabled with CONFIG_KBD.
When CONFIG_KBD is enabled, setconsolefont.sh will double the console
font size on large displays (>1600 lines tall as a heuristic).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
CROSS= is needed for skiboot on PPC64 due to different endianness
relative to coreboot.
The talos_2 fork doesn't share the toolchain because it is the only
_fork_, not board, to be precise. We could add more boards using that
fork without having to create a shared toolchain, it only matters if we
add another fork or start building boards from the upstream release
too.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Two := assignments were factored out together, the second overwrote the
first. Fix to +=, and remove the nitrokey assignment since it came
from a branch.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
This was spelled wrong - it's actually '_depends'. 'initrd' isn't a
module any more so the value doesn't make sense, remove it.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
These boards get purism-blobs as a submodule of the purism coreboot
fork. modules/coreboot used to skip the purism-blobs dependency for
this fork, but the module is not needed at all for these boards.
librem_l1um keeps CONFIG_PURISM_BLOBS=y since it is built from patched
coreboot 4.11.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Default the patch version to empty if the module name already includes
the version. Fixes application of coreboot patches.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The skiboot build fails to find the toolchain when it's not in the
default location. There is only one ppc64 board anyway, so there's no
point trying to share a toolchain for now.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Use .heads-toolchain to mark that the toolchain was built rather than
.xcompile. coreboot doesn't generate .xcompile until the build step,
so all modules had to build successfully before we would stop trying to
to rebuild the toolchain. Build steps should generally produce the
indicated outputs too, which was not occurring here.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reuse the toolchain from a coreboot release for fork builds. Either
the fork or the release can be built first, in either case the
release's toolchain is built at the default location and reused for
later builds.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Define a separate module for each coreboot version, so the module used
to build the ROM will optionally be able to reference the toolchain
from a different module.
This will allow coreboot fork builds to use the toolchain from the
corresponding release.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
At one time coreboot was built using Heads' musl toolchain, but this
was later reverted. coreboot builds with its own toolchain again.
CROSS= has no effect on coreboot proper (only exception is PPC64
skiboot payload). It was added to coreboot by a patch that was deleted
in 8e44853. COREBOOT_IASL was set to the default, that was only needed
when the toolchain was being overridden to override iasl back to the
coreboot one.
ppc64 still specifies CROSS= since skiboot is unable to find coreboot's
toolchain from XGCCPATH but checks CROSS. This builds skiboot with the
Heads toolchain as before.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Remove coreboot 4.8.1, 4.13, and 4.17, which were all unused.
Remove extra copies of EXTRA_FLAGS which duplicated the common
definition. The only difference was
-Wno-error=address-of-packed-member, the warning is now disabled
entirely everywhere with -Wno-address-of-packed-member.
Use separate coreboot_version values for talos_2, nitrokey, and purism,
which gives each a separate build directory.
Move conditional blob definitions out of each coreboot version.
Fix condition for coreboot-blobs - whether a module is a git clone
actually depends on non-empty <module>_repo, not <module>_version==git.
Fix the test so git versions of coreboot can have arbitrary names.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
For iterating, enabling these in the board config is easiest. It's
also possible to manually inject config.user ahead of time, or enable
at runtime without flashing, but the normal enable/flash/reboot path
does not work in qemu since it is unable to flash.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
On platforms using CONFIG_BOOT_EXTRA_TTYS multiple processes may try to
access TPM at the same time, failing with EBUSY. The order of execution
is unpredictable, so the error may appear on main console, secondary one,
or neither of them if the calls are sufficiently staggered. Try up to
three times (including previous one) with small delays in case of error,
instead of immediately scaring users with "you've been pwned" message.
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Updated cbmem searches for CBMEM exposed by kernel in sysfs before
trying to read it from memory directly. As such, there is no need for
pointing to that file explicitly.
New coreboot revision also fixes output of 'cbmem -t' caused by wrong
endianness.
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
