The requested guest-physical memory range may comprise multiple attached
dataspace regions, which must all be detached. This is not required for
the current vbox5 implementation, but for vbox6 as the current API
suggests these semantics.
This commit can be seen as intermediate fix as a real fix should change
the API to prevent long-running detach loops in core that may lock out
requests by other components.
* Only give managing_system permission when all parent nodes of the
corresponding component agree in doing so.
* Move the physical memory constrains heuristic from sandbox library to core
Fix#4335
* Track all caps and ram quotas of the sub-sessions properly
* Release DMA buffers, it is not done implicitely when destroying
the Constrained_ram_allocator
* Do not replenish quota before really releasing memory from
the allocator
Issue #4330
The Session_component must be destroyed before updating the device
model because the Session_component must also release all previously
acquired devices. If the device model is updated before, the devices
might have been removed.
Issue #4330
Pre-allocate all possible type of policy objects as part of the thread meta
state to avoid increased memory consumption due to different policy object
sizes. The cpu_balancer accounts the memory per client and can't forward
potentially occurring out-of-ram exceptions during config-ROM update phases.
Fixes#4333
The commits avoids reading in and allocating memory for all potentially
threads, which are potentially currently not existent (but configured in the
policy beforehand). Instead the policy is read in and evaluated when a thread
is created and policy changes are solely applied to existing/running threads.
By this the commit avoids the increase of memory consumption during the
evaluation of policies during config ROM updates.
Issue #4333
This implements the necessary bits to provide 2D framebuffer support on
top of VirtIO GPU device as implemented in Qemu. I don't know if any
other implementation of this specific device exists.
Compared to the ramfb driver which already exists in Genode Virtio FB driver
has one major benefit. It allows Qemu window to be dynamically resized at
runtime. The driver will treat this as resolution change and act accordingly.
Ramfb driver can currently only use the hardcoded 1024x768 screen size. Changing
screen resolution might not sound like a big deal, but it is rather useful to
run Genode on Qemu in full screen mode.
Some more advanced devices like VirtIO GPU do expect they can receive
responses to VirtIO commands they issue via VirtIO queue. Such responses
are not sent via a separate device writeable queue. Instead the driver
is expected to queue some additional descriptors and buffers which the
device can then use to provide the reply.
This patch adds support for such write-data-read-response opeartion to
Genode VirtIO::Queue implementation. The implementation is pretty simple
and does not support any fancy features like receiving the response
asynchronously. Instead the operation will use caller provided callback
to wait for the device to process the command. Once this callback
returns the write-data-read-response VirtIO::Queue function will invoke
another callback passing received response as argument.
Mesa queries information about the underlying device and this header
denotes the layout of the information. It is also used by the driver
itself to populate the 'info_dataspace'.
Issue #4329.
Since the parts of the 'etnaviv' library are already part of the
'mesa.lib.so' that is normally loaded along-side remove the
duplication here.
Issue #4329.
This filter bridges the gap between a touchscreen driver, which
generates raw touch events and traditional GUI applications that expect
a pointer (absolute motion, press/release of the left mouse button).
Fixes#4332
This patch changes the 'Allocator' interface to the use of 'Attempt'
return values instead of using exceptions for propagating errors.
To largely uphold compatibility with components using the original
exception-based interface - in particluar use cases where an 'Allocator'
is passed to the 'new' operator - the traditional 'alloc' is still
supported. But it existes merely as a wrapper around the new
'try_alloc'.
Issue #4324
The former use of Pthread conditionals did not cover the corner case of
early wakeups just before halting the CPU. These wakeups were simply
lost which resulted in sporadic halts of about 500 ms (the maximum timeout
of all halts in VirtualBox). RTSEMEVENTMULTI preserves early wakeups
and effectively prevents the CPU from halting.
Additionally, we now wakeup the target CPU on VMMR0_DO_GVMM_SCHED_POLL
and, thus, mimic the behavior of the original implementation slightly
better,
Slightly related to #4313
Since the top-level node of the output ROM is always generated by the
rom_filter, there is no way to pass-through the content of an input ROM
without wrapping in an addition XML node.
genodelabs/genode#4326
The Allocator_avl back end will display diagnostic messages if the
address to be freed is not at the beginning of a block. This happens
regulary when 'struct page' objects are not freed in allocation order.
Issue #4325.
Introduce a method to access the dataspace capability of the underlying
backing store for a memory allocation. This is necessary for drivers
where the memory is managed manually and the capability needs to be
given to a client.
Issue #4325.
Explicitly, adapt to current framebuffer/window size after
initialization finished. This ensures the use of the correct framebuffer
dimensions in scenarios without a window manager.
Thanks to Raphael for the patch.
This patch makes the test less dependent on the rate of state updates by
calculating the upgraded quota from the values found in the state report
instead of simply increasing the '_ram_quota' for each incoming report.
This patch replaces the 'Ram_allocator::alloc' RPC function by a
'try_alloc' function, which reflects errors as 'Attempt' return value
instead of an exception.
Issue #4322
Issue #3612
The new 'update_list_model_from_xml' function template simplifies the
use of the list model utility by alleviating the need for implementing a
custom policy class for each model. Instead, the transformation is done
using a few lambda functions given directly as arguments.
Issue #4317
This patch introduces the lx_emul/pin.h interface that enables GPIO stub
drivers to interact with Genode's Pin_control and IRQ sessions via a
simple C API.
Fixes#4316
The new interfaces are meant to gradually replace the existing
Gpio_session interface.
- Each session refers to a single pin.
- The session types distiguish the direction of the signal as input or
output.
- Pin coordinates can be selected via session labels.
- GPIO interrupts are covered by the regular IRQ session interface.
The interfaces are accompanied by framework utilities and interfaces:
- os/pin_driver.h
- pin_control_session/component.h
- pin_state_session/component.h
These headers relieve GPIO drivers from implementing boilerplate code by
providing device-agnostic portions. The A64 pio driver serves as
reference for using those utilities.
https://github.com/nfeske/genode-allwinner/tree/master/src/drivers/pin/a64Fixes#4315
Always instantiating a network device with id `net0`, removes the need to call
append_qemu_nic_args in run scripts unless we want to add forwarding
rules.
genodelabs/genode#4311
Allow specifying additional qemu arguments for externally supported boards
(e.g. zynq_qemu) by adding a `qemu_args` file in the board-property directory.
The syntax of the qemu_args file is as follows:
- Arguments can appear in a single line or in multiple lines as the
lines will be appended (separated by a whitespace) to the global
qemu_args variable.
- If the line is prepended with a `foobar:` expression. The arguments
are only added if the foobar spec is present.
Note, that a `-m` argument specified in the qemu_args file will
override the arguments provided by the run scripts.
genodelabs/genode#4311
First, the former implementation has only considered the pure numerical
variant of the -m argument. Yet, qemu also allows specifying the amount
of memory by `-m 1G`, `-m size=1G` and more.
Second, the default amount of memory for BOARD=pc was 512M (800M in case of okl4).
Since the depot_autopilot.run also required at least 768M on all
platforms it seems reasonable to take 800M as a default value for BOARD=pc and
thereby remove the special treatment of okl4.
genodelabs/genode#4311
- request FPU state on VM exit in portal config
- transfer FPU state on VM entry
- save fpu state early
Avoid any FPU instructions (for example during base API calls), which
use the FPU and overwrite FPU registers holding the guest vCPU FPU
state.
- don't save fpu state of EP
Issue #4313
