The new monitor component at os/src/monitor is the designated successor
of the gdb_monitor. This initial version, however, implements only the
subset needed to inspect the memory of the monitored component(s).
In contrast to the gdb_monitor, the new component supports the monitoring
of multiple components, leveraging the sandbox API. It can therefore be
used as a drop-in replacement for the init component. Like the gdb_monitor,
the new monitor speaks the GDB protocol over Genode's terminal session.
But the protocol implementation does not re-use any gdbserver code,
sidestepping the complexities of POSIX.
There exist two run scripts illustrating the new component. The
os/run/monitor.run script exercises memory inspection via the 'm' command
by letting a test program monitor itself. The os/run/monitor_gdb.run
script allows for the interactive use of GDB to interact with monitored
components.
Issue #4917
Let the sandbox library disregard all unknown config sub nodes so that
supplemental information - like the monitor policy configuration - is
not interpreted as a misconfiguration ("unknown config element type ...").
Issue #4917
This patch moves the destruction of the child's PD session after the
closing of all other sessions because the PD session's role as resource
container might still be needed for orderly reverting the session quotas
when closing the other remaining sessions.
Issue #4917
By default, the sandbox uses the Env::pd() as reference PD session of
the sandbox children.
However, to accomodate use cases where the interplay of the reference
PD session and the child's address space needs to be intercepted, this
patch adds a constructor that takes an interface for the controlled
access of PD intrinsics as argument.
Issue #4917
This patch replaces the former 'address_space' accessor by a new
'with_address_space' interface that grants access to the region map of
the child's address space, but limits the interface lifetime to the
scope of the caller.
Issue #4917
This patch adds the missing application of the region offset to the
resolution of page faults inside managed dataspaces, which resulted in
an unexpected "invalid mapping" message after attaching a managed
dataspace with an offset.
This limitation could be observed during the implementation of the debug
monitor that locally maps a portion of the debugging target's address
space, e.g., a view port of 16 MiB. All traditional uses of managed
dataspaces (e.g., stack area, linker area) happened to attach the
managed dataspaces from their beginning.
Issue #4917
* add semaphore command to ring in order to be able to stop ring
execution before reset (Wa KabyLake)
* implement reset sequence as done by the Linux driver
* reset ring and cancel job of vgpu causing hang
* lower watchdog timeout 1000ms -> 200ms
* improve scheduling of vgpus so progress after reset is made
* improve the generation chaos a little
* tested on Skylake, Kaby Lake, Tiger Lake
issue #4916
* Use jitterentropy only if supported.
On certain targets like pbxa9 or zynq_qemu, the performance counter always
yields 0, which renders jitterentropy unusable. On these platforms, the
Tresor tests now use a static value as entropy source instead.
* Adds a new package test-file_vault_config_report_no_entropy that is used by
the Depot Autopilot on targets without jitterentropy support instead of
test-file_vault_config_report. The only difference between the two packages
is the value of the above described new config attribute of the File Vault.
* Circumvent alignment fault.
The Tresor lib for now has the deficiency of using on-disc data structures
directly in code instead of decoding them first to unpacked, naturally
aligned structures. This causes problems with memory-access alignment on
several platforms (rpi, imx6q_sabrelite, imx53_qsb, imx7d_sabre). As fixing
this properly is a bit of work, the commit disables the tresor_tester and
file_vault_config_report test on the affected platforms in autopilot mode for
now.
* Further adjustments
* Make benchmarks optional
* Use a smaller tresor for rekeying
* Clean up image parameters
* No use implicit routes/resources
* Reduce ram consumption
* Reduce test timeout
* Raise cap quota, required for sel4 x86_64.
Ref #4819
The debug mode turned out to be unnecessry because the plugin can be simply
replaced with an <inline> file VFS plugin that has a content size of 32 bytes.
Ref #4819
* relaxes the timing and reduces the test steps because pistachio is quite
slow and would otherwise trigger problems with our easy approach of using a
dynamic rom instead of a proper manager
* provide IO_PORT and IRQ session to timer driver
Ref #4819
With the update to sel4 and the gcc 12, assembly instructions are generated
and used, like POPCNT. The instruction is available on our native hardware,
but not emulated by the default cpu model necessarily, which leads to
undefined opcode exceptions (Qemu 4.2.1 && seL4). Additionally, the features
of the default Qemu cpu model may vary between Qemu releases and makes it
harder to correlate effects.
The attachment removal is triggered actually on _ds member destruction time,
but after the io_mem representation for the specific base-<platform> possibly
vanished already during _unmap_local in the ~Io_mem_dataspace. This creates
on base-sel4 several kernel warnings about invalid capabilities.
Issue #4913
