The static 'Thread::mystack()' function returns the stack boundaries of
the calling thread. It is useful when a thread uses a diffent stack than
the primary one.
Fixes#2037
When calling 'connect()' in nonblocking mode and the connection has been
established, don't call 'tcp_connect()' again, which would trigger an
assertion with the message 'tcp_connect: can only connect from state
CLOSED'.
Fixes#2039
In addition to modernizing the component now also supports using
empty RAM dataspace as backing store.
For example to use an ISO file the component has to be configured
as follows:
! <config file="image.iso" block_size="2048"/>
To use a empty RAM dataspace that is 256MiB large and has a block
size of 4KiB the configuration looks like this:
! <config size="256M" block_size="4096"/>
Either 'size' or 'file' has to specified. If both are declared the
'file' attribute is soley evaluated.
Issue #1987.
Fixes#2031.
Use quota large enough so that the USB driver does not attempt to
request further memory. On the Raspberry Pi, init has no slack memory
to respond to such a request.
Pass both paths, absolute path to the mount point and the relative path
from the mount point to the file, along with an open handle rather than
just an absolute path. Otherwise, fstat fails if the addressed file is
implemented by another VFS plugin.
Fixes#1789
Move Genode/vbox memory configuration check to separate
genode_check_memory_config() function and call it in platform-specific
setup machine hook of accloff/nova.
The rationale for this change is to omit the check on Muen since the
guest memory is separate and not allocated from base-hw memory.
Issue #2016
Write tick count of next kernel timer to the guest timed events page if
present. This causes the guest VM to be preempted at the requested tick
count and ensures that the guest VM can not monopolize the CPU if no
traps occur.
The base-hw kernel expects a configured switch-event from the guest VM
to base-hw with ID 30 and target vector 32 to be present in the system
policy.
Issue #2016
Switch kernel timer driver to timed event interface. The base-hw kernel
expects a configured self-event with ID 31 and target vector 32 to be
present in the system policy.
ssue #2016
Add call to genode_setup_machine prior to machine registration in
frontend machine setup code. This enables platform-specific adjustments
to the machine instance.
The new function is used on hw_x86_64_muen to clamp the processor count
to 1 as multiple virtual CPUs are not supported on this platform.
Issue #2016
* Implement VMMR0_DO_VMMR0_INIT operation for Muen
- Indicate VT-x support
- Enable unrestricted guest mode
- Set CR[0|4] mask to enable masking of guest CR0.[NE,NW,CD] and
CR4.VMXE bits.
* Implement VMMR0_DO_GVMM_CREATE_VM on Muen
Return error if trying to create SMP VM as VMs with multiple CPUs are
currently not supported on hw_x86_64_muen.
* Add Muen-specific Mem_region type
On hw_x86_64_muen the guest memory layout is static, thus regions are
handed out from an array of memory regions.
Use sinfo API to calculate the base address of the VM RAM physical
0x0 region. This allows to dynamically modify the VM RAM size by
adjusting the Muen policy and Genode vbox files accordingly.
Zeroize all memory regions apart from VM Ram since Virtualbox expects
these regions to be cleared.
* Add Muen subject state struct
The subject state encompasses the guest VM machine state that is
transfered between Virtualbox and hardware accelerated execution on
Muen.
* Add Muen-specific Vm_handler class
* Use Vm_handler to run VM
* Instruct recompiler to flush its code cache
* Copy the Muen subject state to/from the Vbox PCPUMCTX.
* Use the VM interruptibility state to inform the recompiler whether
interrupts are currently inhibited.
* Explicitly handle control register access
If a VM-exit occurs due to a control register access, handle it and
directly continue hardware accelerated execution of guest VM.
Note: On NOVA control register accesses are handled by the kernel [1].
[1] - https://github.com/alex-ab/NOVA/blob/master/src/ec_vmx.cpp#L106
* Reset guest interruptibility state
Assert that interrupts are not inhibited in the Virtualbox machine
state and clear Blocking-by-[STI|MOV to SS] guest interruptibility
flags prior to running a guest VM in hwaccel mode.
* Set return code depending on exit reason
Do not unconditionally emulate the next instruction on VM exit. This
makes sharing the VM FPU state with Virtualbox unnecessary, as FPU
instructions are not emulated by the recompiler any longer.
Also, assert that the FPU has not been used by the recompiler
* Inject pending guest VM interrupts on Muen
Use mapped subject pending interrupts page of guest VM to perform
interrupt injection. IRQs are transferred from the Virtualbox trap
manager state to the pending interrupts region for injection. If an
IRQ remains pending upon returning to the recompiler, it is copied
back to the trap manager state and cleared in the subject interrupts
region.
* Inform recompiler about changed SYSENTER_[CS|EIP|ESP] values,
otherwise values set while running the guest VM hardware accelerated
may get lost.
* Implement genode_cpu_hz() on Muen
Determine the CPU frequency dynamically using the sinfo API.
Issue #2016
* The Vm thread is always paused and on exception to make sure that guest VM
execution is suspended whenever we handle an interrupt. Also signal the Vm
session to poke waiting threads (e.g. Virtualbox EMT).
* Implement Vm::proceed
Switch to the mode transition assembly code declared at the _vt_vm_entry
label.
Issue #2016
The entry enables interrupts and initiates a handover to the guest VM by
invoking event number one. The sti instruction is placed at the start to
allow exits to Muen before handing off to the VM if window exiting is
requested.
Issue #2016
The virtual PCI model delivers IRQs to the PIC by default and to the
IOAPIC only if the guest operating system selected the IOAPIC with the
'_PIC' ACPI method and if it called the '_PRT' ACPI method afterwards.
When running a guest operating system which uses the IOAPIC, but does
not call these ACPI methods (for example Genode/NOVA), the new
configuration option
<config force_ioapic="yes">
enforces the delivery of PCI IRQs to the IOAPIC.
Fixes#2029
The alternate stack must use the stack area as, e.g., Thread::myself()
depends on this property. Hybrid components do not depend on this
property and, therefore, use a static stack buffer.
Fixes#1935
* Align pitch value to 64 byte (thanks to cnuke for investigation)
* Get rid of extra dataspace retrival and attachment, now that we always buffer
* Consistently name all lx_emul helpers: lx_* (get rid of dde*)
* Add missing file headers
Fix#1997
Instead of providing a buffer to the client and blitting from that
to the "real" framebuffer as an option, with this commit we always do so.
Thereby its possible to immediately destroy the old framebuffer used by
hardware when a configuration change is done, and a new framebuffer
is used. This also simplifies the modesetting.
Moreover, this commit fixes an issue when not using the connector reporting.
Until now the initial mode detection of connectors was only done when
the report was created. this is a regression that entered the driver
when upgrading to the recent Linux kernel version.
Ref #1997
Use new env, component and logging frameworks.
Sync file system and block device on component entrypoint.
Support for 'root' session argument.
Increase Rump open file descriptor limit.
Issue #1987Fixes#2011
* remove all 'Genode::env()' calls
* use attached roms to read configuration
* use compoenent framework
* remove all PDBG, PINF, PWRN macros
Issue #1987Fixes#2019
