This commit updates Early-Adopters (EA) version of Sculpt to the version
for The Curious (TC). Most importantly, it contains the new interactive
sculpt-manager component that automates many system management and
configuration tasks.
This patch enhances the 'Child' interface with the ability to retry the
deployment after an initial attempt failed. This way, packages can be
installed on demand based on the error feedback of deployment attempts.
The state report reflects the progress of downloading, verifying, and
extracting archives. For the download step, it includes the progress
as reported by fetchurl.
This patch changes the button widget to apply the vertical offset to its
child widgets at draw time, not at the layout phase. This way, the
visual feedback on button press/release changes is more direct because
it sidesteps the geometry animation.
Rename LwIP library in preparation for removal of LwIP libc plugin. The
current LwIP library will be replaced with a new version stripped of its
synchronous socket support. The next version will be incompatible with
the current, so removing 'lwip.lib.so' completely for a period makes it
easy to identify legacy users.
Fix#2797
This patch enhances the box layout such that child widgets are
equally stretched to the available size whenever the box layout's
size is larger than its min size. Furthermore, it corrects the
mixed-up use of the terms east and west in the float widget.
This component creates a GPT on a Block device. It supports the common
actions, as in adding, deleting and modifying entries in the GPT, while
considering alignment constraints. If needed it will round the length of
a partition down to meet those constraints. The component will not
perform layout checking, i.e., it does not care about overlapping
partitions. Only when apping a partition it will make sure that the
partition will fit.
Please read _repos/gems/src/app/gpt_write/README_ for more detailed
information on how to use the component and feel free to check out
_repos/gems/run/gpt_write.run_.
Fixes#2814.
The box-layout widget used to trigger the geometry animation of its
children immediately when updating the widget from the XML model (by
calling 'child->Widget::geometry'). This caused layout inconsistencies
in situations where the box layout is defined not by the constraints of
the child widgets but from the outside (the parent calls Widget::size).
Since the final layout is not known before the parent defines the actual
size, this patch moves the trigger point for the geometry animation to
'Widget::size'.
The new 'version' attribute can be used to explicitly distinguish
widgets that have the same name. E.g., if one widget is removed and
another with the same name is created somewhere else at the same time,
the menu view would normally interpret this change as a movement.
By attaching a distinct 'version' the new instance, menu view won't
attempt perform a smooth transition between the old and new widgets.
This patch addresses the corner case where hovering changes while a
button is held, e.g., when accidentially moving the pointer out of a
application window's area during a drag-and-drop operation. The patch
makes the window manager aware of the drag/idle state. Only when idle,
the pointer position is propagated to the decorator now.
This commit changes the 'Input::Event' type to be more safe and to
deliver symbolic character information along with press events.
Issue #2761Fixes#2786
By incorporating the sculpt version into the path where customizations
are stored, we can update and roll back sculpt versions without risking
configuration incompatibilities. By default, the sculpt version
corresponds to <genode-dir>/VERSION.
The condition must first check the io-buffer length and then check the
content. Otherwise, cat'ting a file that is padded with zeros up to
page size (io-buffer size) yields an out-of-range read access.
This patch replaces the terminal's formerly built-in fonts with the new
VFS-based font handling.
To avoid the copying of the terminal's font configuration across run
scripts, this patch adds the new terminal/pkg runtime package, which
includes everything needed for instantiating a terminal: the actual
terminal component, the library dependencies (vfs_ttf, which in turn
depends on the libc), a font (bitstream-vera), and a reasonable default
configuration.
Fixes#2758
VFS plugin to replicate from one file-system to another. Can be used to
seed a mutable file-system with an immutable file-system. The plugin is
configure with two paths, a read-only path, and a read-write path. This
is an initial implementation that copies files on open. It is not
optimized to perform actual copy-on-write, but the result is the same.
<vfs>
<dir name="immutable"> ... </dir>
<dir name="mutable"> ... </dir>
<dir name="cow">
<cow ro="/immutable" rw="/mutable"/>
</dir>
</vfs>
Fix#2745
Reduce the size and forward compatibility of VFS file-system
constructors by passing an object holding accessors for 'Genode::Env',
'Genode::Allocator', response handlers, and the root file-system.
Fix#2742
A ring buffer that uses a single dataspace mapped twice in consecutive
regions. This allows any operation that is less or equal to the size of
the buffer to be read or written in a single pass. The capacity of
Magic_ring_buffer is defined at runtime.
Fix#2725
This commit introduces a VFS plugin that exposes the glyphs and
metadata of a TrueType font as a pseudo file system. The TTF font data
is obtained from the VFS. The resulting pseudo file system is a
directory that contains the files 'glyphs', 'baseline', 'max_width',
and 'max_height'.
The counter part of the plugin is the 'Vfs_font' class that implements
the 'Text_painter::Font' interface by accessing the pseudo file system
as provided by the TTF VFS plugin.
Fixes#2740
This patch enhances the VFS access utilities of gems/vfs.h to be usable
with a prior created root directory. It also adds a
'File_content::bytes' method for operating of the raw content, which is
needed in situations where the data pointer is passed to a third-party
parser.
This patch improves the `Text_painter` utility that is commonly used by
native Genode components to render text:
- Support for subpixel positioning
- Generic interface for accessing font data
- Basic UTF-8 support
Since the change decouples the font format from the 'Text_painter' and
changes the API to use the sub-pixel accurate 'Text_painter::Position'
type, all users of the utility require an adaptation.
Fixes#2716
This patch enables the use of the VFS from VFS plugins by passing a
reference of the root directory to the constructors of file-system
instances. Since it changes the signature of 'Vfs::Dir_file_system',
any code that uses the VFS directly requires an adaptation.
Fixes#2701
The visibility of the client's view is re-evaluated at each animation
step. However, when the client appears long after the initial
fade-in/out animation is completed, the initial visibility state
remaines unchanged. This happens when booting the Sculpt scenario in
Qemu where the the nit_fb instances of the leitzentrale could not be
started in time. This patch fixes the issue by re-evaluating the view
visibility also at the view-creation time.
We need to update the blueprint pkg path as well in case the start node
is changed. Otherwise the query tool will keep using the initially
configured pkg path.
This patch improves the error handling for the case where the depot
lacks the content of the to-be-deployed pkg. Instead of infinitely
reattempting to obtain blueprints for such content, the deploy tool
prints a single message.
This patch adds two key remappings for the magic keys of the sculpt
scenario. KEY_DASHBOARD toggles the leitzentrale. KEY_RESTART resets
the noux-control subsystem of the leitzentrale.
Issue #2676
If only a single AHCI device is present, the block service provided by
the drivers subsystem allows the client to refer to this block device
via the label 'default'.
Issue #2676
This patch changes the 'depot_deploy' tool to spawn any number of
runtimes. In contrast to the original version, which merely consumed a
blueprint generated by a pre-configured 'depot_query' instance, the new
version actively generates queries as needed. So there is a feedback
loop between 'depot_deploy' and 'depot_query'. The instantiation of
subsystems is controlled by the '<start>' nodes of the 'depot_deploy'
configuration. For each start node, the tool tries to determine the
ingredients (provided by the depot) by asking the 'depot_query' tool.
Once the information is complete, a corresponding start node of the
dynamic init instance is generated.
This patch introduces the subnodes <provides>, <requires>, and
<content> to the <runtime> node. All <rom> sessions that are
expected from the depot appear within the <content> node, which
sets them nicely apart from <rom> sessions that may be required
as runtime arguments.
Note that the <requires> and <provides> nodes do not appear in the
patch because the existing depot_deploy tool does not interpret this
information (the pkg/test-fs_report runtime does not provide any
service, and the timer session is provided as a common route).
This patch adds the config attribute 'query'. If set to the value "rom",
the query information is obtained from a ROM session labeled "query".
Otherwise, the query information is expected to be part of the config.
This enables us to use the component in two different scenarios. In
one scenario, 'depot_query' is embedded in a managed dynamic init.
Here, taking the query from the config is easy. In the other scenario,
'depot_query' is running as a daemon with a once-configured VFS but
varying queries. The queries originate from a component that does not
control the 'depot_query' config.
The new 'Terminal_session::size_changed_sigh' RPC function registers a
signal handler that is triggered each time when the terminal size
changes. It enables the client to adjust itself to the new size by
subsequently calling the 'size' RPC function. Of all terminal servers,
only the graphical terminal triggers this signal.
The 'Buffered_xml' utility is used by three components and a fourth is
on the way. To avoid another duplication of the code, this patch makes
it publicly available at 'os/buffered_xml.h'.
By specifying the 'config' of a '<runtime>' as an attribute, we can
distinguish the case where the config is obtained from a ROM session
from the case where the config is specified inline as a '<config>' node.
The '<dependencies>' attribute 'path' refers to a depot archive.
Depending on the attributes 'source="no"' and 'binary="no" (defaults
shown), the depot_query component determines the source/binary
dependencies of the given archive. The result has the form of a report
with a sequence of <missing> and <present> nodes, each equipped with the
'path' of the dependency.
Since the <query> node results in the generation of a "blueprint"
report, it should better be named <blueprint>. This also clears the way
for adding further query types such as <dependencies>, following the
same pattern of generating a report of the corresponding query name.
With this patch, it becomes possible to pass a 'Directory const &' to
the constructor of 'File_content', which is intuitive as the directory
content is not changed by reading a file.
The 'File_content::for_each_line' method did not correctly detect the
end of data for files without a trailing linebreak, thereby cutting the
last character from the last line.
This patch removes the former use of ram_fs, fs_rom, and fs_report from
the subsystem and uses a report_rom instead. The fs-based reporting was
introduced to accommodate automatically instantiated usb_block drivers,
which turned out to be impractical for the sculpt scenario.
This is a follow-up commit to "Increase default warning level", which
overrides Genode's new default warning level for targets contained in
higher-level repositories. By explicitly whitelisting all those targets,
we can selectively adjust them to the new strictness over time - by
looking out for 'CC_CXX_WARN_STRICT' in the target description files.
Issue #465
The patch adjust the code of the base, base-<kernel>, and os repository.
To adapt existing components to fix violations of the best practices
suggested by "Effective C++" as reported by the -Weffc++ compiler
argument. The changes follow the patterns outlined below:
* A class with virtual functions can no longer publicly inherit base
classed without a vtable. The inherited object may either be moved
to a member variable, or inherited privately. The latter would be
used for classes that inherit 'List::Element' or 'Avl_node'. In order
to enable the 'List' and 'Avl_tree' to access the meta data, the
'List' must become a friend.
* Instead of adding a virtual destructor to abstract base classes,
we inherit the new 'Interface' class, which contains a virtual
destructor. This way, single-line abstract base classes can stay
as compact as they are now. The 'Interface' utility resides in
base/include/util/interface.h.
* With the new warnings enabled, all member variables must be explicitly
initialized. Basic types may be initialized with '='. All other types
are initialized with braces '{ ... }' or as class initializers. If
basic types and non-basic types appear in a row, it is nice to only
use the brace syntax (also for basic types) and align the braces.
* If a class contains pointers as members, it must now also provide a
copy constructor and assignment operator. In the most cases, one
would make them private, effectively disallowing the objects to be
copied. Unfortunately, this warning cannot be fixed be inheriting
our existing 'Noncopyable' class (the compiler fails to detect that
the inheriting class cannot be copied and still gives the error).
For now, we have to manually add declarations for both the copy
constructor and assignment operator as private class members. Those
declarations should be prepended with a comment like this:
/*
* Noncopyable
*/
Thread(Thread const &);
Thread &operator = (Thread const &);
In the future, we should revisit these places and try to replace
the pointers with references. In the presence of at least one
reference member, the compiler would no longer implicitly generate
a copy constructor. So we could remove the manual declaration.
Issue #465
This patch changes the depot layout such that each archive is
represented as a directory that contains the versions of the archive as
subdirectories.
Issue #2610
The missing dissolve of the dummy decorator input component resulted in
problems when using the themed_decorator when repeatedly opening and
closing windows. In contrast to the default decorator, the themed
decorator creates and destroys nitpicker sessions per window.
This is a follup-up commit for "driver_manager: add fb_boot_drv
support". It refines the heuristics for selecting the most suitable
framebuffer driver be prevent boot_fb_drv from being preferred over
the VESA driver when running in Qemu.
This commit replaces the old xray_trigger component by a new component
called global_keys_handler. For details, please refer to the issue text
and the accompanied README file.
Fixes#2554
Without this patch, usb_drv would issue a resource request when
assigning a USB device to a VM in the sculpt scenario.
Furthermore, the patch adjusts the intel_fb quota to enable it on
devices where the driver allocates the framebuffer in many 4K pieces.
This is a drivers subsystem that starts the most fundamental
(framebuffer, input, block) device drivers dynamically, depending on the
runtime-detected devices. The discovered block devices are reported
as a "block_devices" report.
This patch applies the handling of cursor keys, function keys, and page
up/down keys even if no keymap is defined. This is the case when using
the terminal with character events produced by the input filter.
Add a "writeable" policy option to the ahci_drv and part_blk Block
servers and default from writeable to ready-only. Should a policy
permit write acesss the session request argument "writeable" may still
downgrade a session to ready-only.
Fix#2469
When idle, menu_view de-schedules timer events to save processing time.
Once reactivated by a dialog update, it computes the passed time and
applies the result to the animator. However, the animation was most likely
started by the update not during the sleep. So the passed time must not
be applied to the animation in this case. Otherwise, many animation steps
are computed at once within a single visible frame.
Furthermore, the patch adjusts the REDRAW_PERIOD to 2, which is a better
value for geometric movements as opposed to mere color-blending effects
where the frame rate does not matter so much.
It also refines the nitpicker-buffer relocation in a way that extends
the buffer but does not shrink it. This lowers the interaction with
nitpicker in situations where the dialog size changes a lot.
By applying the text output to the alpha buffer in addition to the pixel
buffer, labels can now appear without the need for an underlying frame
or button.
The new widget allows one to align a child widget within a larger parent
widget by specifying the boolean attributes 'north', 'south', 'east',
and 'west'. If none is specified, the child is centered. If opposite
attributes are specified, the child is stretched.
This improves the output quality of antialiased lines onto a transparent
nitpicker buffer. For antialiased graphics operations, the initial color
leaks through. Leaking 50% gray is better than leaking black, in
particular when drawing white lines.
This patch makes the use of 'List' invisible at the 'Animator'
interface. This allows users of the utility to keep 'Animator::Items' in
a custom 'List' with no aliasing problems.
The VFS library can be used in single-threaded or multi-threaded
environments and depending on that, signals are handled by the same thread
which uses the VFS library or possibly by a different thread. If a VFS
plugin needs to block to wait for a signal, there is currently no way
which works reliably in both environments.
For this reason, this commit makes the interface of the VFS library
nonblocking, similar to the File_system session interface.
The most important changes are:
- Directories are created and opened with the 'opendir()' function and the
directory entries are read with the recently introduced 'queue_read()'
and 'complete_read()' functions.
- Symbolic links are created and opened with the 'openlink()' function and
the link target is read with the 'queue_read()' and 'complete_read()'
functions and written with the 'write()' function.
- The 'write()' function does not wait for signals anymore. This can have
the effect that data written by a VFS library user has not been
processed by a file system server yet when the library user asks for the
size of the file or closes it (both done with RPC functions at the file
system server). For this reason, a user of the VFS library should
request synchronization before calling 'stat()' or 'close()'. To make
sure that a file system server has processed all write request packets
which a client submitted before the synchronization request,
synchronization is now requested at the file system server with a
synchronization packet instead of an RPC function. Because of this
change, the synchronization interface of the VFS library is now split
into 'queue_sync()' and 'complete_sync()' functions.
Fixes#2399
The launcher.run scenario was last updated mid-may of the recently
developed cap-quota accounting (before all cap types were covered).
Hence, the quotas used in the scenario are too low. This patch adjusts
the values such that the scenario can be started on NOVA on Qemu. It
also fixes a warning about a deprecated way of configuring the
report_rom component.
Thanks to Jörg-Christian Böhme for reporting!
This patch changes the noux build rules to produce a tar archive in
'bin/', alleviating the need for this step from the run scripts.
This way, the visible result of a built noux package is a single (tar)
file in '<build-dir>bin/', which is suited for the use as a ROM module.
With the capability-quota mechanism, the terminal-session won't always
be constructed completely on the first try (we may run out of caps in
the middle of the construction). Therefore, all members of the object
must be properly destructable. Furthermore, the patch replaces the
sliced heap by a heap to avoid allocating a new dataspace for each line
of the cell array.
